summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-03-14arm64: dts: rockchip: Fix pcie reset gpio on Orange Pi 5 MaxJianfeng Liu
According to the schematic, pcie reset gpio is GPIO3_D4, not GPIO4_D4. Fixes: c600d252dc52 ("arm64: dts: rockchip: Add Orange Pi 5 Max board") Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com> Reviewed-by: Jimmy Hon <honyuenkwun@gmail.com> Link: https://lore.kernel.org/r/20250311141245.2719796-1-liujianfeng1994@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-13arm64: dts: rockchip: Enable HDMI audio output for ArmSoM Sige7Jianfeng Liu
HDMI audio is available on the ArmSoM Sige7 HDMI TX port. Enable it for HDMI0 port. Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com> Link: https://lore.kernel.org/r/20250312164056.3998224-1-liujianfeng1994@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-13arm64: dts: rockchip: Enable onboard eMMC on Radxa E20CJonas Karlman
The Radxa E20C may come with an onboard eMMC (8GB / 16GB / 32GB / 64GB). Enable support for the onboard eMMC on Radxa E20C. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20250305214108.1327208-4-jonas@kwiboo.se Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-13arm64: dts: rockchip: Add SDHCI controller for RK3528Jonas Karlman
The SDHCI controller in Rockchip RK3528 is similar to the one included in RK3588. Add device tree node for the SDHCI controller in RK3528. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20250305214108.1327208-3-jonas@kwiboo.se Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-13arm64: dts: rockchip: Remove bluetooth node from rock-3aChen-Yu Tsai
The Bluetooth node described in the device tree is actually on an M.2 slot. What module is present depends on what the end user installed, and should be left to an overlay. Remove the existing bluetooth node. This gets rid of bogus timeout errors. Fixes: 8cf890aabd45 ("arm64: dts: rockchip: Add nodes for SDIO/UART Wi-Fi/Bluetooth modules to Radxa Rock 3A") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20250220165051.1889055-1-wens@kernel.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-13arm64: dts: rockchip: Move rk356x scmi SHMEM to reserved memoryChukun Pan
0x0 to 0xf0000000 are SDRAM memory areas where 0x10f000 is located. So move the SHMEM memory of arm_scmi to the reserved memory node. Fixes: a3adc0b9071d ("arm64: dts: rockchip: add core dtsi for RK3568 SoC") Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Link: https://lore.kernel.org/r/20250308100001.572657-2-amadeus@jmu.edu.cn Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-12arm64: dts: rockchip: Add AP6275P wireless support to ArmSoM Sige7Jianfeng Liu
ArmSoM Sige7 uses the PCI-e AP6275P Wi-Fi 6 module. The pcie@0 node can be used as Bridge1, so the wifi@0 node is used as a device under the bridge 1 similar with Khadas Edge 2. Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com> Link: https://lore.kernel.org/r/20250311142825.2727171-1-liujianfeng1994@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-12arm64: dts: rockchip: Enable HDMI audio outputs for Orange Pi 5 PlusJimmy Hon
HDMI audio is available on the Orange Pi 5 Plus HDMI TX ports. Enable it for both ports. Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> Link: https://lore.kernel.org/r/20250227235623.1624-5-honyuenkwun@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-12arm64: dts: rockchip: Enable HDMI1 on Orange Pi 5 PlusJimmy Hon
Enable the second HDMI output port on the Orange Pi 5 Plus Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> Reviewed-by: Ondrej Jirman <megi@xff.cz> Link: https://lore.kernel.org/r/20250227235623.1624-4-honyuenkwun@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-12arm64: dts: rockchip: Enable HDMI audio outputs for Orange Pi 5 MaxJimmy Hon
HDMI audio is available on the Orange Pi 5 Max HDMI TX ports. Enable it for both ports. Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> Link: https://lore.kernel.org/r/20250227235623.1624-3-honyuenkwun@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-12arm64: dts: rockchip: Enable HDMI0 audio output for Orange Pi 5/5BJimmy Hon
HDMI audio is available on the Orange Pi 5 HDMI0 TX port. Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> Link: https://lore.kernel.org/r/20250227235623.1624-2-honyuenkwun@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-08arm64: dts: rockchip: Add SPI NOR device on the ROCK 4DDetlev Casanova
The SPI NOR chip is connected on the FSPI0 core, so enable the sfc0 node and add the flash device to it. The SPI NOR won't work at higher speed than 50 MHz, specify the limit. Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com> Link: https://lore.kernel.org/r/20250228145304.581349-3-detlev.casanova@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-08arm64: dts: rockchip: Add SFC nodes for rk3576Detlev Casanova
The rk3576 SoC has 2 SFC cores that provide FSPI functions. Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com> Link: https://lore.kernel.org/r/20250228145304.581349-2-detlev.casanova@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-08arm64: dts: rockchip: Add maskrom button to Radxa E20CJonas Karlman
Radxa E20C has two buttons, one SARADC maskrom button and one GPIO user button. Add support for the maskrom button using a adc-keys node, also add the regulators used by SARADC controller. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20250304201642.831218-5-jonas@kwiboo.se Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-08arm64: dts: rockchip: Add SARADC node for RK3528Jonas Karlman
Add a device tree node for the SARADC controller used by RK3528. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20250304201642.831218-4-jonas@kwiboo.se Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-08arm64: dts: rockchip: Add user button to Radxa E20CJonas Karlman
Radxa E20C has two buttons, one SARADC maskrom button and one GPIO user button. Add support for the user button using a gpio-keys node. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20250304201642.831218-3-jonas@kwiboo.se Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-08arm64: dts: rockchip: Add leds node to Radxa E20CJonas Karlman
Radxa E20C has three gpio controlled leds (sys, wan and lan). Add led nodes and set default trigger to heartbeat for the sys led and netdev for the lan and wan leds. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20250304201642.831218-2-jonas@kwiboo.se Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-08arm64: dts: rockchip: Add HDMI support for rock-4dDetlev Casanova
Enable HDMI and VOP nodes for the rock-4d board. Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com> Link: https://lore.kernel.org/r/20250306180737.127726-1-detlev.casanova@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-08arm64: dts: rockchip: enable SCMI clk for RK3528 SoCChukun Pan
Same as RK3568, RK3528 uses SCMI clk instead of ARMCLK. Add SCMI clk for CPU, GPU and RNG will also use it. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Link: https://lore.kernel.org/r/20250307100008.789129-2-amadeus@jmu.edu.cn Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-08arm64: dts: rockchip: Enable HDMI receiver on rock-5bSebastian Reichel
The Rock 5B has a Micro HDMI port, which can be used for receiving HDMI data. This enables support for it. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://lore.kernel.org/r/20250307091857.646581-3-dmitry.osipenko@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-08arm64: dts: rockchip: Add device tree support for HDMI RX ControllerShreeya Patel
Add device tree support for Synopsys DesignWare HDMI RX Controller. Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Co-developed-by: Dingxian Wen <shawn.wen@rock-chips.com> Signed-off-by: Dingxian Wen <shawn.wen@rock-chips.com> Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://lore.kernel.org/r/20250307091857.646581-2-dmitry.osipenko@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-08arm64: dts: rockchip: Add rk3528 QoS register nodeChukun Pan
The Quality-of-Service (QsS) node stores/restores specific register contents when the power domains is turned off/on. Add QoS node so that they can connect to the power domain. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Link: https://lore.kernel.org/r/20250306123809.273655-3-amadeus@jmu.edu.cn Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-08dt-bindings: mfd: syscon: Add rk3528 QoS register compatibleChukun Pan
Document rk3528 compatible for QoS registers. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20250306123809.273655-2-amadeus@jmu.edu.cn Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-06arm64: dts: rockchip: add MNT Reform 2 laptopPatrick Wildt
MNT Reform 2 is an open source laptop with replaceable CPU modules, including a version with the RK3588-based MNT RCORE[1], which is based on Firefly's iCore-3588Q SoM: - Rockchip RK3588 - Quad A76 and Quad A55 CPU - 6 TOPS NPU - up to 32GB LPDDR4x RAM - SD Card slot - Gigabit ethernet port - HDMI port - 2x mPCIe ports for WiFi or NVMe - 3x USB 3.0 Type-A HOST port [1] https://shop.mntre.com/products/mnt-reform Co-developed-by: "Lukas F. Hartmann" <lukas@mntre.com> Signed-off-by: "Lukas F. Hartmann" <lukas@mntre.com> Signed-off-by: Patrick Wildt <patrick@blueri.se> Link: https://lore.kernel.org/r/Z8S6uDM634KJuyKP@windev.fritz.box Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-06dt-bindings: arm: rockchip: Add MNT Reform 2 (RCORE)Patrick Wildt
Document board compatible bindings for the MNT Reform 2 with it's RCORE SoM, which is based on Firefly's iCore-3588Q. Signed-off-by: Patrick Wildt <patrick@blueri.se> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/Z8S5SHqUqKYiT6Wd@windev.fritz.box Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-06dt-bindings: soc: rockchip: Add RK3528 VPU GRF sysconYao Zi
Add compatible string for VPU GRF found on RK3528 SoC. Signed-off-by: Yao Zi <ziyao@disroot.org> Acked-by: "Rob Herring (Arm)" <robh@kernel.org> Link: https://lore.kernel.org/r/20250305194217.47052-3-ziyao@disroot.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-06dt-bindings: soc: rockchip: Add RK3528 VO GRF sysconYao Zi
Add compatible string for VO GRF found on RK3528 SoC. Signed-off-by: Yao Zi <ziyao@disroot.org> Acked-by: "Rob Herring (Arm)" <robh@kernel.org> Link: https://lore.kernel.org/r/20250305194217.47052-2-ziyao@disroot.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-06arm64: dts: rockchip: Enable hdmi out display for rk3576-evb-v10Andy Yan
Enable vop and hdmi on rk3576 evb1, so we can get a display output on this board now. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Link: https://lore.kernel.org/r/20250305025128.479245-1-andyshrk@163.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-04arm64: dts: rockchip: Enable hdmi display on sige5Andy Yan
Enable hdmi display on sige5 board. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Link: https://lore.kernel.org/r/20241231095728.253943-4-andyshrk@163.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-04arm64: dts: rockchip: Add hdmi for rk3576Andy Yan
Add hdmi and it's phy dt node for rk3576. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Link: https://lore.kernel.org/r/20241231095728.253943-3-andyshrk@163.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-04arm64: dts: rockchip: Add vop for rk3576Andy Yan
Add VOP and VOP_MMU found on rk3576. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Link: https://lore.kernel.org/r/20241231095728.253943-2-andyshrk@163.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-04arm64: dts: rockchip: Add ES8388 audio codec fallback on RK3588 boardsKrzysztof Kozlowski
Devicetree bindings for ES8388 audio codec expect the device to be marked as compatible with ES8328. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250304104200.76178-2-krzysztof.kozlowski@linaro.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-04arm64: dts: rockchip: Add ES8388 audio codec fallback on RK3399 ROC PC PLUSKrzysztof Kozlowski
Devicetree bindings for ES8388 audio codec expect the device to be marked as compatible with ES8328. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250304104200.76178-1-krzysztof.kozlowski@linaro.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-04arm64: dts: rockchip: Add uart0 pinctrl to Radxa E20CJonas Karlman
Radxa E20C route UART0 M0 pins (GPIO4_C7 and GPIO4_D0) to the onboard CH340B for debug console use. Add pinctrl for UART0 M0 pins used for serial console. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20250228064024.3200000-6-jonas@kwiboo.se Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-04arm64: dts: rockchip: Add pinctrl and gpio nodes for RK3528Jonas Karlman
Add pinctrl and gpio nodes for RK3528 and import rk3528-pinctrl.dtsi from vendor linux-6.1-stan-rkr5 kernel with the hdmi-pins-idle node removed due to missing label reference to pcfg_output_low_pull_down. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20250228064024.3200000-5-jonas@kwiboo.se Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-04dt-bindings: soc: rockchip: Add RK3528 ioc grf sysconJonas Karlman
The GPIO is accessible via ioc grf syscon registers on RK3528. Add compatible string for RK3528 ioc grf syscon. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20250228064024.3200000-2-jonas@kwiboo.se Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-28arm64: dts: rockchip: add usb typec host support to rk3588-jaguarHeiko Stuebner
Jaguar has two type-c ports connected to fusb302 controllers that can work both in host and device mode and can also run in display-port altmode. While these ports can work in dual-role data mode, they do not support powering the device itself as power-sink. This causes issues because the current infrastructure does not cope well with dual-role data without dual-role power. So add the necessary nodes for the type-c controllers as well as enable the relevant core usb nodes. So far host modes works reliably, but device-mode does not. So devicemode needs more investigation. Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Tested-by: Quentin Schulz <quentin.schulz@cherry.de> Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de> Link: https://lore.kernel.org/r/20250228150853.329175-1-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-28arm64: dts: rockchip: Add GPU power domain regulator dependency for RK3588Sebastian Reichel
Enabling the GPU power domain requires that the GPU regulator is enabled. The regulator is enabled at boot time, but gets disabled automatically when there are no users. This means the system might run into a failure state hanging the whole system for the following use cases: * if the GPU driver is being probed late (e.g. build as a module and firmware is not in initramfs), the regulator might already have been disabled. In that case the power domain is enabled before the regulator. * unbinding the GPU driver will disable the PM domain and the regulator. When the driver is bound again, the PM domain will be enabled before the regulator and error appears. Avoid this by adding an explicit regulator dependency to the power domain. Tested-by: Heiko Stuebner <heiko@sntech.de> Reported-by: Adrián Martínez Larumbe <adrian.larumbe@collabora.com> Tested-by: Adrian Larumbe <adrian.larumbe@collabora.com> # On Rock 5B Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20250220-rk3588-gpu-pwr-domain-regulator-v6-8-a4f9c24e5b81@kernel.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-27arm64: dts: rockchip: Enable HDMI1 audio output for Orange Pi 5 UltraJimmy Hon
HDMI audio is available on the Orange Pi 5 Ultra HDMI1 TX port. Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> Link: https://lore.kernel.org/r/20250222193332.1761-6-honyuenkwun@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-27arm64: dts: rockchip: Enable HDMI1 on Orange Pi 5 UltraJimmy Hon
Enable the only HDMI output port on the Orange Pi 5 Ultra Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> Tested-By: Johannes Erdfelt <johannes@erdfelt.com> Link: https://lore.kernel.org/r/20250222193332.1761-5-honyuenkwun@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-27arm64: dts: rockchip: Add Orange Pi 5 Ultra boardJimmy Hon
The RK3588 Single Board Computer includes - eMMC - microSD - UART - 2 PWM LEDs - RTC - RTL8125 network controller on PCIe 2.0x1. - M.2 M-key connector routed to PCIe 3.0x4 - PWM controlled heat sink fan. - 2 USB2 ports - lower USB3 port - upper USB3 port with OTG capability - Mali GPU - SPI NOR flash - Mask Rom button - Analog audio using es8388 codec via the headset jack and onboard mic - HDMI1 - HDMI IN the vcc5v0_usb30 regulator shares the same enable gpio pin as the vcc5v0_usb20 regulator. The Orange Pi 5 Ultra is a single board computer powered by the Rockchip RK3588 with similar board layout as the 5 Max but with the HDMI0 swapped for HDMI IN. Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> Tested-By: Johannes Erdfelt <johannes@erdfelt.com> Link: https://lore.kernel.org/r/20250222193332.1761-4-honyuenkwun@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-27dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 UltraJimmy Hon
Add devicetree binding for the Xunlong Orange Pi 5 Ultra board. The Orange Pi 5 Ultra is a single board computer powered by the Rockchip RK3588 with similar board layout as the 5 Max but with the HDMI0 swapped for HDMI IN. Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org> Link: https://lore.kernel.org/r/20250222193332.1761-3-honyuenkwun@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-27arm64: dts: rockchip: Adapt to differences between Orange Pi 5 Max and UltraJimmy Hon
The Orange Pi 5 Plus and Orange Pi 5 Max have 2SK3018s attached to the PWM LEDs. The Orange Pi 5 Ultra does not, and thus needs the PWM polarity inverted. Also remove the model/compatible from the dtsi. It should be at the board level only. Fixes: c600d252dc52 ("arm64: dts: rockchip: Add Orange Pi 5 Max board") Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> Link: https://lore.kernel.org/r/20250222193332.1761-2-honyuenkwun@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-27arm64: dts: rockchip: add hdmi1 support to ROCK 5 ITXJianfeng Liu
Enable the HDMI port next to ethernet port. Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com> Link: https://lore.kernel.org/r/20250225030904.2813023-1-liujianfeng1994@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-27arm64: dts: rockchip: Enable HDMI audio outputs for Rock 5BDetlev Casanova
HDMI audio is available on the Rock 5B HDMI TX ports. Enable it for both ports. Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de> Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com> Fixes: 419d1918105e ("ASoC: simple-card-utils: use __free(device_node) for device node") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/20250217215641.372723-4-detlev.casanova@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-27arm64: dts: rockchip: Add HDMI audio outputs for rk3588Detlev Casanova
For hdmi0_sound, use the simple-audio-card driver with the hdmi0 QP node as CODEC and the i2s5 device as CPU. Similarly for hdmi1_sound, the CODEC is the hdmi1 node and the CPU is i2s6, but only added in the rk3588-extra.dtsi device tree as the second TX HDMI port is not available on base versions of the SoC. The simple-audio-card,mclk-fs value is set to 128 as it is done in the downstream driver. The #sound-dai-cells value is set to 0 in the hdmi0 and hdmi1 nodes so that they can be used as audio codec nodes. Tested-by: Quentin Schulz <quentin.schulz@cherry.de> # RK3588 Tiger Haikou Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com> Fixes: 419d1918105e ("ASoC: simple-card-utils: use __free(device_node) for device node") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/20250217215641.372723-3-detlev.casanova@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-27arm64: dts: rockchip: Enable HDMI1 on rk3588-evb1Cristian Ciocaltea
Add the necessary DT changes to enable the second HDMI output port on Rockchip RK3588 EVB1. While at it, switch the position of &vop_mmu and @vop to maintain the alphabetical order. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Link: https://lore.kernel.org/r/20250223-vop2-hdmi1-disp-modes-v2-5-f4cec5e06fbe@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-27arm64: dts: rockchip: Add HDMI1 PHY PLL clock source to VOP2 on RK3588Cristian Ciocaltea
VOP2 on RK3588 is able to use the HDMI PHY PLL as an alternative and more accurate pixel clock source to improve handling of display modes up to 4K@60Hz on video ports 0, 1 and 2. The HDMI1 PHY PLL clock source cannot be added directly to vop node in rk3588-base.dtsi, along with the HDMI0 related one, because HDMI1 is an optional feature and its PHY node belongs to a separate (extra) DT file. Therefore, add the HDMI1 PHY PLL clock source to VOP2 by overwriting its clocks & clock-names properties in the extra DT file. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Link: https://lore.kernel.org/r/20250223-vop2-hdmi1-disp-modes-v2-4-f4cec5e06fbe@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-27arm64: dts: rockchip: Enable HDMI1 PHY clk provider on RK3588Cristian Ciocaltea
Since commit c4b09c562086 ("phy: phy-rockchip-samsung-hdptx: Add clock provider support"), the HDMI PHY PLL can be used as an alternative and more accurate pixel clock source for VOP2 to improve display modes handling on RK3588 SoC. Add the missing #clock-cells property to allow using the clock provider functionality of HDMI1 PHY. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Link: https://lore.kernel.org/r/20250223-vop2-hdmi1-disp-modes-v2-3-f4cec5e06fbe@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-02-26arm64: dts: rockchip: Enable USB3 OTG on rk3588s Cool Pi 4BAndy Yan
Enable USB3 OTG and it's related PHY node. And the PHY will also be shared with the upcoming DisplayPort controller. Signed-off-by: Andy Yan <andyshrk@163.com> Link: https://lore.kernel.org/r/20250223100757.73531-1-andyshrk@163.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 07:25:56 +0000