| Age | Commit message (Collapse) | Author |
|---|
|
In test_stream_transport_change_client(), the client sends CONTROL_CONTINUE
on each iteration, even when connect() is unsuccessful. This causes a flood
of control messages in the server that hangs around for more than 10
seconds after the test finishes, triggering several timeouts and causing
subsequent tests to fail. This was discovered in testing a newly proposed
test that failed in this way on the client side:
...
33 - SOCK_STREAM transport change null-ptr-deref...ok
34 - SOCK_STREAM ioctl(SIOCINQ) functionality...recv timed out
The CONTROL_CONTINUE message is used only to tell to the server to call
accept() to consume successful connections, so that subsequent connect()
will not fail for finding the queue full.
Send CONTROL_CONTINUE message only when the connect() has succeeded, or
found the queue full. Note that the second connect() can also succeed if
the first one was interrupted after sending the request.
Fixes: 3a764d93385c ("vsock/test: Add test for null ptr deref when transport changes")
Cc: leonardi@redhat.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Link: https://patch.msgid.link/20250708111701.129585-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add SIOCINQ ioctl tests for both SOCK_STREAM and SOCK_SEQPACKET.
The client waits for the server to send data, and checks if the SIOCINQ
ioctl value matches the data size. After consuming the data, the client
checks if the SIOCINQ value is 0.
Signed-off-by: Xuewei Niu <niuxuewei.nxw@antgroup.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Tested-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Link: https://patch.msgid.link/20250708-siocinq-v6-4-3775f9a9e359@antgroup.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new test to ensure that when the transport changes a null pointer
dereference does not occur. The bug was reported upstream [1] and fixed
with commit 2cb7c756f605 ("vsock/virtio: discard packets if the
transport changes").
KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067]
CPU: 2 UID: 0 PID: 463 Comm: kworker/2:3 Not tainted
Workqueue: vsock-loopback vsock_loopback_work
RIP: 0010:vsock_stream_has_data+0x44/0x70
Call Trace:
virtio_transport_do_close+0x68/0x1a0
virtio_transport_recv_pkt+0x1045/0x2ae4
vsock_loopback_work+0x27d/0x3f0
process_one_work+0x846/0x1420
worker_thread+0x5b3/0xf80
kthread+0x35a/0x700
ret_from_fork+0x2d/0x70
ret_from_fork_asm+0x1a/0x30
Note that this test may not fail in a kernel without the fix, but it may
hang on the client side if it triggers a kernel oops.
This works by creating a socket, trying to connect to a server, and then
executing a second connect operation on the same socket but to a
different CID (0). This triggers a transport change. If the connect
operation is interrupted by a signal, this could cause a null-ptr-deref.
Since this bug is non-deterministic, we need to try several times. It
is reasonable to assume that the bug will show up within the timeout
period.
If there is a G2H transport loaded in the system, the bug is not
triggered and this test will always pass. This is because
`vsock_assign_transport`, when using CID 0, like in this case, sets
vsk->transport to `transport_g2h` that is not NULL if a G2H transport is
available.
[1]https://lore.kernel.org/netdev/Z2LvdTTQR7dBmPb5@v4bel-B760M-AORUS-ELITE-AX/
Suggested-by: Hyunwoo Kim <v4bel@theori.io>
Suggested-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250630-test_vsock-v5-2-2492e141e80b@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Increase the coverage of test for UAF due to socket unbinding, and losing
transport in general. It's a follow up to commit 301a62dfb0d0 ("vsock/test:
Add test for UAF due to socket unbinding") and discussion in [1].
The idea remains the same: take an unconnected stream socket with a
transport assigned and then attempt to switch the transport by trying (and
failing) to connect to some other CID. Now do this iterating over all the
well known CIDs (plus one).
While at it, drop the redundant synchronization between client and server.
Some single-transport setups can't be tested effectively; a warning is
issued. Depending on transports available, a variety of splats are possible
on unpatched machines. After reverting commit 78dafe1cf3af ("vsock: Orphan
socket after transport release") and commit fcdd2242c023 ("vsock: Keep the
binding until socket destruction"):
BUG: KASAN: slab-use-after-free in __vsock_bind+0x61f/0x720
Read of size 4 at addr ffff88811ff46b54 by task vsock_test/1475
Call Trace:
dump_stack_lvl+0x68/0x90
print_report+0x170/0x53d
kasan_report+0xc2/0x180
__vsock_bind+0x61f/0x720
vsock_connect+0x727/0xc40
__sys_connect+0xe8/0x100
__x64_sys_connect+0x6e/0xc0
do_syscall_64+0x92/0x1c0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
WARNING: CPU: 0 PID: 1475 at net/vmw_vsock/virtio_transport_common.c:37 virtio_transport_send_pkt_info+0xb2b/0x1160
Call Trace:
virtio_transport_connect+0x90/0xb0
vsock_connect+0x782/0xc40
__sys_connect+0xe8/0x100
__x64_sys_connect+0x6e/0xc0
do_syscall_64+0x92/0x1c0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:sock_has_perm+0xa7/0x2a0
Call Trace:
selinux_socket_connect_helper.isra.0+0xbc/0x450
selinux_socket_connect+0x3b/0x70
security_socket_connect+0x31/0xd0
__sys_connect_file+0x79/0x1f0
__sys_connect+0xe8/0x100
__x64_sys_connect+0x6e/0xc0
do_syscall_64+0x92/0x1c0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 7 PID: 1518 at lib/refcount.c:25 refcount_warn_saturate+0xdd/0x140
RIP: 0010:refcount_warn_saturate+0xdd/0x140
Call Trace:
__vsock_bind+0x65e/0x720
vsock_connect+0x727/0xc40
__sys_connect+0xe8/0x100
__x64_sys_connect+0x6e/0xc0
do_syscall_64+0x92/0x1c0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
refcount_t: underflow; use-after-free.
WARNING: CPU: 0 PID: 1475 at lib/refcount.c:28 refcount_warn_saturate+0x12b/0x140
RIP: 0010:refcount_warn_saturate+0x12b/0x140
Call Trace:
vsock_remove_bound+0x18f/0x280
__vsock_release+0x371/0x480
vsock_release+0x88/0x120
__sock_release+0xaa/0x260
sock_close+0x14/0x20
__fput+0x35a/0xaa0
task_work_run+0xff/0x1c0
do_exit+0x849/0x24c0
make_task_dead+0xf3/0x110
rewind_stack_and_make_dead+0x16/0x20
[1]: https://lore.kernel.org/netdev/CAGxU2F5zhfWymY8u0hrKksW8PumXAYz-9_qRmW==92oAx1BX3g@mail.gmail.com/
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250611-vsock-test-inc-cov-v3-3-5834060d9c20@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There was an issue with SO_LINGER: instead of blocking until all queued
messages for the socket have been successfully sent (or the linger timeout
has been reached), close() would block until packets were handled by the
peer.
Add a test to alert on close() lingering when it should not.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250522-vsock-linger-v6-5-2ad00b0e447e@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a helper function that sets SO_LINGER. Adapt the caller.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250522-vsock-linger-v6-4-2ad00b0e447e@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Distill the virtio_vsock_sock::bytes_unsent checking loop (ioctl SIOCOUTQ)
and move it to utils. Tweak the comment.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250522-vsock-linger-v6-3-2ad00b0e447e@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In the sigpipe test, we expect send() to fail, but we do not check if
send() fails with the errno we expect (EPIPE).
Add this check and repeat the send() in case of EINTR as we do in other
tests.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250514141927.159456-4-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the other peer calls shutdown(SHUT_RD), there is a chance that
the send() call could occur before the message carrying the close
information arrives over the transport. In such cases, the send()
might still succeed. To avoid this race, let's retry the send() call
a few times, ensuring the test is more reliable.
Sleep a little before trying again to avoid flooding the other peer
and filling its receive buffer, causing false-negative.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250514141927.159456-3-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These tests:
"SOCK_STREAM ioctl(SIOCOUTQ) 0 unsent bytes"
"SOCK_SEQPACKET ioctl(SIOCOUTQ) 0 unsent bytes"
output: "Unexpected 'SIOCOUTQ' value, expected 0, got 64 (CLIENT)".
They test that the SIOCOUTQ ioctl reports 0 unsent bytes after the data
have been received by the other side. However, sometimes there is a delay
in updating this "unsent bytes" counter, and the test fails even though
the counter properly goes to 0 several milliseconds later.
The delay occurs in the kernel because the used buffer notification
callback virtio_vsock_tx_done(), called upon receipt of the data by the
other side, doesn't update the counter itself. It delegates that to
a kernel thread (via vsock->tx_work). Sometimes that thread is delayed
more than the test expects.
Change the test to poll SIOCOUTQ until it returns 0 or a timeout occurs.
Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Fixes: 18ee44ce97c1 ("test/vsock: add ioctl unsent bytes test")
Link: https://patch.msgid.link/20250507151456.2577061-1-kshk@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Explicitly close() a TCP_ESTABLISHED (connectible) socket with SO_LINGER
enabled.
As for now, test does not verify if close() actually lingers.
On an unpatched machine, may trigger a null pointer dereference.
Tested-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250210-vsock-linger-nullderef-v3-2-ef6244d02b54@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Deliberately fail a connect() attempt; expect error. Then verify that
subsequent attempt (using the same socket) can still succeed, rather than
fail outright.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250128-vsock-transport-vs-autobind-v3-6-1cf57065b770@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fail the autobind, then trigger a transport reassign. Socket might get
unbound from unbound_sockets, which then leads to a reference count
underflow.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250128-vsock-transport-vs-autobind-v3-5-1cf57065b770@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a helper for socket()+bind(). Adapt callers.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250128-vsock-transport-vs-autobind-v3-3-1cf57065b770@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Exercise the ENOMEM error path by attempting to hit net.core.optmem_max
limit on send().
Test aims to create a memory leak, kmemleak should be employed.
Fixed by commit 60cf6206a1f5 ("virtio/vsock: Improve MSG_ZEROCOPY error
handling").
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20241219-test-vsock-leaks-v4-7-a416e554d9d7@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ask for MSG_ZEROCOPY completion notification, but do not recv() it.
Test attempts to create a memory leak, kmemleak should be employed.
Fixed by commit fbf7085b3ad1 ("vsock: Fix sk_error_queue memory leak").
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20241219-test-vsock-leaks-v4-6-a416e554d9d7@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Attempt to enqueue a child after the queue was flushed, but before
SOCK_DONE flag has been set.
Test tries to produce a memory leak, kmemleak should be employed. Dealing
with a race condition, test by its very nature may lead to a false
negative.
Fixed by commit d7b0ff5a8667 ("virtio/vsock: Fix accept_queue memory
leak").
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20241219-test-vsock-leaks-v4-5-a416e554d9d7@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow for selecting specific test IDs to be executed.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20241219-test-vsock-leaks-v4-2-a416e554d9d7@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace 1000000000ULL with NSEC_PER_SEC.
No functional change intended.
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20241219-test-vsock-leaks-v4-1-a416e554d9d7@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace setsockopt() calls with calls to functions that follow
setsockopt() with getsockopt() and check that the returned value and its
size are the same as have been set. (Except in vsock_perf.)
Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Change parameters of SO_VM_SOCKETS_* to unsigned long long as documented
in the vm_sockets.h, because the corresponding kernel code requires them
to be at least 64-bit, no matter what architecture. Otherwise they are
too small on 32-bit machines.
Fixes: 5c338112e48a ("test/vsock: rework message bounds test")
Fixes: 685a21c314a8 ("test/vsock: add big message test")
Fixes: 542e893fbadc ("vsock/test: two tests to check credit update logic")
Fixes: 8abbffd27ced ("test/vsock: vsock_perf utility")
Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This happens on 64-bit big-endian machines.
SO_RCVLOWAT requires an int parameter. However, instead of int, the test
uses unsigned long in one place and size_t in another. Both are 8 bytes
long on 64-bit machines. The kernel, having received the 8 bytes, doesn't
test for the exact size of the parameter, it only cares that it's >=
sizeof(int), and casts the 4 lower-addressed bytes to an int, which, on
a big-endian machine, contains 0. 0 doesn't trigger an error, SO_RCVLOWAT
returns with success and the socket stays with the default SO_RCVLOWAT = 1,
which results in vsock_test failures, while vsock_perf doesn't even notice
that it's failed to change it.
Fixes: b1346338fbae ("vsock_test: POLLIN + SO_RCVLOWAT test")
Fixes: 542e893fbadc ("vsock/test: two tests to check credit update logic")
Fixes: 8abbffd27ced ("test/vsock: vsock_perf utility")
Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce two tests, one for SOCK_STREAM and one for SOCK_SEQPACKET,
which use SIOCOUTQ ioctl to check that the number of unsent bytes is
zero after delivering a packet.
vsock_connect and vsock_accept are no longer static: this is to
create more generic tests, allowing code to be reused for SEQPACKET
and STREAM.
Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement port for given CID as input argument instead of using
hardcoded value '1234'. This allows to run different test instances
on a single CID. Port argument is not required parameter and if it is
not set, then default value will be '1234' - thus we preserve previous
behaviour.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20240123072750.4084181-1-avkrasnov@salutedevices.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Both tests are almost same, only differs in two 'if' conditions, so
implemented in a single function. Tests check, that credit update
message is sent:
1) During setting SO_RCVLOWAT value of the socket.
2) When number of 'rx_bytes' become smaller than SO_RCVLOWAT value.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Tune message length calculation to make this test work on machines
where 'getpagesize()' returns >32KB. Now maximum message length is not
hardcoded (on machines above it was smaller than 'getpagesize()' return
value, thus we get negative value and test fails), but calculated at
runtime and always bigger than 'getpagesize()' result. Reproduced on
aarch64 with 64KB page size.
Fixes: 5c338112e48a ("test/vsock: rework message bounds test")
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reported-by: Bogdan Marcynkov <bmarcynk@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20231121211642.163474-1-avkrasnov@salutedevices.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This add bind connect test which creates a listening server socket
and tries to connect a client with a bound local port to it twice.
Co-developed-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Filippo Storniolo <f.storniolo95@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds three tests for MSG_ZEROCOPY feature:
1) SOCK_STREAM tx with different buffers.
2) SOCK_SEQPACKET tx with different buffers.
3) SOCK_STREAM test to read empty error queue of the socket.
Patch also works as preparation for the next patches for tools in this
patchset: vsock_perf and vsock_uring_test:
1) Adds several new functions to util.c - they will be also used by
vsock_uring_test.
2) Adds two new functions for MSG_ZEROCOPY handling to a new source
file - such source will be shared between vsock_test, vsock_perf and
vsock_uring_test, thus avoiding code copy-pasting.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The test was a bit complicated to read.
Added variables to keep track of the bytes read and to be read
in each step. Also some comments.
The test is unchanged.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We have a very common pattern used in vsock_test that we can
now replace with the new send_buf().
This allows us to reuse the code we already had to check the
actual return value and wait for all the bytes to be sent with
an appropriate timeout.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We have a very common pattern used in vsock_test that we can
now replace with the new recv_buf().
This allows us to reuse the code we already had to check the
actual return value and wait for all bytes to be received with
an appropriate timeout.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds two tests for 'shutdown()' call. It checks that SIGPIPE is
sent when MSG_NOSIGNAL is not set and vice versa. Both flags SHUT_WR
and SHUT_RD are tested.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This adds MSG_PEEK test for SOCK_SEQPACKET. It works in the same way as
SOCK_STREAM test, except it also tests MSG_TRUNC flag.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This new version makes test more complicated by adding empty read,
partial read and data comparisons between MSG_PEEK and normal reads.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This updates expected return values for invalid buffer test. Now such
values are returned from transport, not from af_vsock.c.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This adds test which checks case when data of newly received skbuff is
appended to the last skbuff in the socket's queue. It looks like simple
test with 'send()' and 'recv()', but internally it triggers logic which
appends one received skbuff to another. Test checks that this feature
works correctly.
This test is actual only for virtio transport.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This adds SOCK_STREAM and SOCK_SEQPACKET tests for invalid buffer case.
It tries to read data to NULL buffer (data already presents in socket's
queue), then uses valid buffer. For SOCK_STREAM second read must return
data, because skbuff is not dropped, but for SOCK_SEQPACKET skbuff will
be dropped by kernel, and 'recv()' will return EAGAIN.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds test for sending message, bigger than peer's buffer size.
For SOCK_SEQPACKET socket it must fail, as this type of socket has
message size limit.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This updates message bound test making it more complex. Instead of
sending 1 bytes messages with one MSG_EOR bit, it sends messages of
random length(one half of messages are smaller than page size, second
half are bigger) with random number of MSG_EOR bits set. Receiver
also don't know total number of messages.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This adds test to check, that when poll() returns POLLIN, POLLRDNORM bits,
next read call won't block.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add test where sender sends two message, each with own
data pattern. Reader tries to read first to broken buffer:
it has three pages size, but middle page is unmapped. Then,
reader tries to read second message to valid buffer. Test
checks, that uncopied part of first message was dropped
and thus not copied as part of second message.
Signed-off-by: Krasnov Arseniy Vladimirovich <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test for receive timeout check: connection is established,
receiver sets timeout, but sender does nothing. Receiver's
'read()' call must return EAGAIN.
Signed-off-by: Krasnov Arseniy Vladimirovich <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set 'MSG_EOR' in one of message sent, check that 'MSG_EOR'
is visible in corresponding message at receiver.
Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210903123321.3273866-1-arseny.krasnov@kaspersky.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Implement two tests of SOCK_SEQPACKET socket: first sends data by
several 'write()'s and checks that number of 'read()' were same.
Second test checks MSG_TRUNC flag. Cases for connect(), bind(),
etc. are not tested, because it is same as for stream socket.
Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Whenever the server side of vsock is binding to the socket, but not
listening yet, we expect the behavior from the client to be identical to
what happens when the server is not even started.
This new test runs the server side so that it binds to the socket
without ever listening to it. The client side will try to connect and
should receive an ECONNRESET error.
This new test provides a way to validate the previously introduced patch
for making sure the server side will always answer with a RST packet in
case the client requested a new connection.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test if the MSG_PEEK flags of recv(2) works as expected.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since we now have several options, in the help we print the list
of all supported options and a brief description of them.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some tests can fail with transports that have a slightly
different behavior, so let's add the possibility to specify
which tests to skip.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Before check if a send returns -EPIPE, we need to make sure the
connection is closed.
To do that, we use epoll API to wait EPOLLRDHUP or EPOLLHUP events
on the socket.
Reported-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The vsock_test.c program runs a test suite of AF_VSOCK test cases.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
