| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Add initial DMR support, which required smarter RAPL probe
- Fix AMD MSR RAPL energy reporting
- Add RAPL power limit configuration output
- Minor fixes
* tag 'turbostat-2025.06.08' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2025.06.08
tools/power turbostat: Add initial support for BartlettLake
tools/power turbostat: Add initial support for DMR
tools/power turbostat: Dump RAPL sysfs info
tools/power turbostat: Avoid probing the same perf counters
tools/power turbostat: Allow probing RAPL with platform_features->rapl_msrs cleared
tools/power turbostat: Clean up add perf/msr counter logic
tools/power turbostat: Introduce add_msr_counter()
tools/power turbostat: Remove add_msr_perf_counter_()
tools/power turbostat: Remove add_cstate_perf_counter_()
tools/power turbostat: Remove add_rapl_perf_counter_()
tools/power turbostat: Quit early for unsupported RAPL counters
tools/power turbostat: Always check rapl_joules flag
tools/power turbostat: Fix AMD package-energy reporting
tools/power turbostat: Fix RAPL_GFX_ALL typo
tools/power turbostat: Add Android support for MSR device handling
tools/power turbostat.8: pm_domain wording fix
tools/power turbostat.8: fix typo: idle_pct should be pct_idle
|
|
Add initial DMR support, which required smarter RAPL probe
Fix AMD MSR RAPL energy reporting
Add RAPL power limit configuration output
Minor fixes
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Add initial support for BartlettLake.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Add initial support for DMR.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
for example:
intel-rapl:1: psys 28.0s:100W 976.0us:100W
intel-rapl:0: package-0 28.0s:57W,max:15W 2.4ms:57W
intel-rapl:0/intel-rapl:0:0: core disabled
intel-rapl:0/intel-rapl:0:1: uncore disabled
intel-rapl-mmio:0: package-0 28.0s:28W,max:15W 2.4ms:57W
[lenb: simplified format]
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
squish me
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
For the RAPL package energy status counter, Intel and AMD share the same
perf_subsys and perf_name, but with different MSR addresses.
Both rapl_counter_arch_infos[0] and rapl_counter_arch_infos[1] are
introduced to describe this counter for different Vendors.
As a result, the perf counter is probed twice, and causes a failure in
in get_rapl_counters() because expected_read_size and actual_read_size
don't match.
Fix the problem by skipping the already probed counter.
Note, this is not a perfect fix. For example, if different
vendors/platforms use the same MSR value for different purpose, the code
can be fooled when it probes a rapl_counter_arch_infos[] entry that does
not belong to the running Vendor/Platform.
In a long run, better to put rapl_counter_arch_infos[] into the
platform_features so that this becomes Vendor/Platform specific.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
cleared
platform_features->rapl_msrs describes the RAPL MSRs supported. While
RAPL Perf counters can be exposed from different kernel backend drivers,
e.g. RAPL MSR I/F driver, or RAPL TPMI I/F driver.
Thus, turbostat should first blindly probe all the available RAPL Perf
counters, and falls back to the RAPL MSR counters if they are listed in
platform_features->rapl_msrs.
With this, platforms that don't have RAPL MSRs can clear the
platform_features->rapl_msrs bits and use RAPL Perf counters only.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Increase the code readability by moving the no_perf/no_msr flag and the
cai->perf_name/cai->msr sanity checks into the counter probe functions.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
probe_rapl_msr() is reused for probing RAPL MSR counters, cstate MSR
counters and MPERF/APERF/SMI MSR counters, thus its name is misleading.
Similar to add_perf_counter(), introduce add_msr_counter() to probe a
counter via MSR. Introduce wrapper function add_rapl_msr_counter() at
the same time to add extra check for Zero return value for specified
RAPL counters.
No functional change intended.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
As the only caller of add_msr_perf_counter_(), add_msr_perf_counter()
just gives extra debug output on top. There is no need to keep both
functions.
Remove add_msr_perf_counter_() and move all the logic to
add_msr_perf_counter().
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
As the only caller of add_cstate_perf_counter_(),
add_cstate_perf_counter() just gives extra debug output on top. There is
no need to keep both functions.
Remove add_cstate_perf_counter_() and move all the logic to
add_cstate_perf_counter().
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
As the only caller of add_rapl_perf_counter_(), add_rapl_perf_counter()
just gives extra debug output on top. There is no need to keep both
functions.
Remove add_rapl_perf_counter_() and move all the logic to
add_rapl_perf_counter().
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Quit early for unsupported RAPL counters.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
rapl_joules bit should always be checked even if
platform_features->rapl_msrs is not set or no_msr flag is used.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
commit 05a2f07db888 ("tools/power turbostat: read RAPL counters via
perf") that adds support to read RAPL counters via perf defines the
notion of a RAPL domain_id which is set to physical_core_id on
platforms which support per_core_rapl counters (Eg: AMD processors
Family 17h onwards) and is set to the physical_package_id on all the
other platforms.
However, the physical_core_id is only unique within a package and on
platforms with multiple packages more than one core can have the same
physical_core_id and thus the same domain_id. (For eg, the first cores
of each package have the physical_core_id = 0). This results in all
these cores with the same physical_core_id using the same entry in the
rapl_counter_info_perdomain[]. Since rapl_perf_init() skips the
perf-initialization for cores whose domain_ids have already been
visited, cores that have the same physical_core_id always read the
perf file corresponding to the physical_core_id of the first package
and thus the package-energy is incorrectly reported to be the same
value for different packages.
Note: This issue only arises when RAPL counters are read via perf and
not when they are read via MSRs since in the latter case the MSRs are
read separately on each core.
Fix this issue by associating each CPU with rapl_core_id which is
unique across all the packages in the system.
Fixes: 05a2f07db888 ("tools/power turbostat: read RAPL counters via perf")
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Fix typo in the currently unused RAPL_GFX_ALL macro definition.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
It uses /dev/msrN device paths on Android instead of /dev/cpu/N/msr,
updates error messages and permission checks to reflect the Android
device path, and wraps platform-specific code with #if defined(ANDROID)
to ensure correct behavior on both Android and non-Android systems.
These changes improve compatibility and usability of turbostat on
Android devices.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
turbostat.8: clarify that uncore "domains" are Power Management domains,
aka pm_domains.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
idle_pct should be pct_idle
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Pull mount fixes from Al Viro:
"Various mount-related bugfixes:
- split the do_move_mount() checks in subtree-of-our-ns and
entire-anon cases and adapt detached mount propagation selftest for
mount_setattr
- allow clone_private_mount() for a path on real rootfs
- fix a race in call of has_locked_children()
- fix move_mount propagation graph breakage by MOVE_MOUNT_SET_GROUP
- make sure clone_private_mnt() caller has CAP_SYS_ADMIN in the right
userns
- avoid false negatives in path_overmount()
- don't leak MNT_LOCKED from parent to child in finish_automount()
- do_change_type(): refuse to operate on unmounted/not ours mounts"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
do_change_type(): refuse to operate on unmounted/not ours mounts
clone_private_mnt(): make sure that caller has CAP_SYS_ADMIN in the right userns
selftests/mount_setattr: adapt detached mount propagation test
do_move_mount(): split the checks in subtree-of-our-ns and entire-anon cases
fs: allow clone_private_mount() for a path on real rootfs
fix propagation graph breakage by MOVE_MOUNT_SET_GROUP move_mount(2)
finish_automount(): don't leak MNT_LOCKED from parent to child
path_overmount(): avoid false negatives
fs/fhandle.c: fix a race in call of has_locked_children()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
"The series 'Fix uprobe pte be overwritten when expanding vma' fixes a
longstanding and quite obscure bug related to the vma merging of the
uprobe mmap page"
* tag 'mm-stable-2025-06-06-16-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
selftests/mm: add test about uprobe pte be orphan during vma merge
selftests/mm: extract read_sysfs and write_sysfs into vm_util
mm: expose abnormal new_pte during move_ptes
mm: fix uprobe pte be overwritten when expanding vma
mm/damon: s/primitives/code/ on comments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"13 hotfixes.
6 are cc:stable and the remainder address post-6.15 issues or aren't
considered necessary for -stable kernels. 11 are for MM"
* tag 'mm-hotfixes-stable-2025-06-06-16-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
kernel/rcu/tree_stall: add /sys/kernel/rcu_stall_count
MAINTAINERS: add mm swap section
kmsan: test: add module description
MAINTAINERS: add tlb trace events to MMU GATHER AND TLB INVALIDATION
mm/hugetlb: fix huge_pmd_unshare() vs GUP-fast race
mm/hugetlb: unshare page tables during VMA split, not before
MAINTAINERS: add Alistair as reviewer of mm memory policy
iov_iter: use iov_offset for length calculation in iov_iter_aligned_bvec
mm/mempolicy: fix incorrect freeing of wi_kobj
alloc_tag: handle module codetag load errors as module load failures
mm/madvise: handle madvise_lock() failure during race unwinding
mm: fix vmstat after removing NR_BOUNCE
KVM: s390: rename PROT_NONE to PROT_TYPE_DUMMY
|
|
Make sure that detached trees don't receive mount propagation.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the FWFT SBI extension, which is part of SBI 3.0 and a
dependency for many new SBI and ISA extensions
- Support for getrandom() in the VDSO
- Support for mseal
- Optimized routines for raid6 syndrome and recovery calculations
- kexec_file() supports loading Image-formatted kernel binaries
- Improvements to the instruction patching framework to allow for
atomic instruction patching, along with rules as to how systems need
to behave in order to function correctly
- Support for a handful of new ISA extensions: Svinval, Zicbop, Zabha,
some SiFive vendor extensions
- Various fixes and cleanups, including: misaligned access handling,
perf symbol mangling, module loading, PUD THPs, and improved uaccess
routines
* tag 'riscv-for-linus-6.16-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (69 commits)
riscv: uaccess: Only restore the CSR_STATUS SUM bit
RISC-V: vDSO: Wire up getrandom() vDSO implementation
riscv: enable mseal sysmap for RV64
raid6: Add RISC-V SIMD syndrome and recovery calculations
riscv: mm: Add support for Svinval extension
RISC-V: Documentation: Add enough title underlines to CMODX
riscv: Improve Kconfig help for RISCV_ISA_V_PREEMPTIVE
MAINTAINERS: Update Atish's email address
riscv: uaccess: do not do misaligned accesses in get/put_user()
riscv: process: use unsigned int instead of unsigned long for put_user()
riscv: make unsafe user copy routines use existing assembly routines
riscv: hwprobe: export Zabha extension
riscv: Make regs_irqs_disabled() more clear
perf symbols: Ignore mapping symbols on riscv
RISC-V: Kconfig: Fix help text of CMDLINE_EXTEND
riscv: module: Optimize PLT/GOT entry counting
riscv: Add support for PUD THP
riscv: xchg: Prefetch the destination word for sc.w
riscv: Add ARCH_HAS_PREFETCH[W] support with Zicbop
riscv: Add support for Zicbop
...
|
|
Pull more block updates from Jens Axboe:
- NVMe pull request via Christoph:
- TCP error handling fix (Shin'ichiro Kawasaki)
- TCP I/O stall handling fixes (Hannes Reinecke)
- fix command limits status code (Keith Busch)
- support vectored buffers also for passthrough (Pavel Begunkov)
- spelling fixes (Yi Zhang)
- MD pull request via Yu:
- fix REQ_RAHEAD and REQ_NOWAIT IO err handling for raid1/10
- fix max_write_behind setting for dm-raid
- some minor cleanups
- Integrity data direction fix and cleanup
- bcache NULL pointer fix
- Fix for loop missing write start/end handling
- Decouple hardware queues and IO threads in ublk
- Slew of ublk selftests additions and updates
* tag 'block-6.16-20250606' of git://git.kernel.dk/linux: (29 commits)
nvme: spelling fixes
nvme-tcp: fix I/O stalls on congested sockets
nvme-tcp: sanitize request list handling
nvme-tcp: remove tag set when second admin queue config fails
nvme: enable vectored registered bufs for passthrough cmds
nvme: fix implicit bool to flags conversion
nvme: fix command limits status code
selftests: ublk: kublk: improve behavior on init failure
block: flip iter directions in blk_rq_integrity_map_user()
block: drop direction param from bio_integrity_copy_user()
selftests: ublk: cover PER_IO_DAEMON in more stress tests
Documentation: ublk: document UBLK_F_PER_IO_DAEMON
selftests: ublk: add stress test for per io daemons
selftests: ublk: add functional test for per io daemons
selftests: ublk: kublk: decouple ublk_queues from ublk server threads
selftests: ublk: kublk: move per-thread data out of ublk_queue
selftests: ublk: kublk: lift queue initialization out of thread
selftests: ublk: kublk: tie sqe allocation to io instead of queue
selftests: ublk: kublk: plumb q_id in io_uring user_data
ublk: have a per-io daemon instead of a per-queue daemon
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / iio driver updates from Greg KH:
"Here is the big char/misc/iio and other small driver subsystem pull
request for 6.16-rc1.
Overall, a lot of individual changes, but nothing major, just the
normal constant forward progress of new device support and cleanups to
existing subsystems. Highlights in here are:
- Large IIO driver updates and additions and device tree changes
- Android binder bugfixes and logfile fixes
- mhi driver updates
- comedi driver updates
- counter driver updates and additions
- coresight driver updates and additions
- echo driver removal as there are no in-kernel users of it
- nvmem driver updates
- spmi driver updates
- new amd-sbi driver "subsystem" and drivers added
- rust miscdriver binding documentation fix
- other small driver fixes and updates (uio, w1, acrn, hpet,
xillybus, cardreader drivers, fastrpc and others)
All of these have been in linux-next for quite a while with no
reported problems"
* tag 'char-misc-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (390 commits)
binder: fix yet another UAF in binder_devices
counter: microchip-tcb-capture: Add watch validation support
dt-bindings: iio: adc: Add ROHM BD79100G
iio: adc: add support for Nuvoton NCT7201
dt-bindings: iio: adc: add NCT7201 ADCs
iio: chemical: Add driver for SEN0322
dt-bindings: trivial-devices: Document SEN0322
iio: adc: ad7768-1: reorganize driver headers
iio: bmp280: zero-init buffer
iio: ssp_sensors: optimalize -> optimize
HID: sensor-hub: Fix typo and improve documentation
iio: admv1013: replace redundant ternary operator with just len
iio: chemical: mhz19b: Fix error code in probe()
iio: adc: at91-sama5d2: use IIO_DECLARE_BUFFER_WITH_TS
iio: accel: sca3300: use IIO_DECLARE_BUFFER_WITH_TS
iio: adc: ad7380: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: adc: ad4695: rename AD4695_MAX_VIN_CHANNELS
iio: adc: ad4695: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: introduce IIO_DECLARE_BUFFER_WITH_TS macros
iio: make IIO_DMA_MINALIGN minimum of 8 bytes
...
|
|
Currently, __split_vma() triggers hugetlb page table unsharing through
vm_ops->may_split(). This happens before the VMA lock and rmap locks are
taken - which is too early, it allows racing VMA-locked page faults in our
process and racing rmap walks from other processes to cause page tables to
be shared again before we actually perform the split.
Fix it by explicitly calling into the hugetlb unshare logic from
__split_vma() in the same place where THP splitting also happens. At that
point, both the VMA and the rmap(s) are write-locked.
An annoying detail is that we can now call into the helper
hugetlb_unshare_pmds() from two different locking contexts:
1. from hugetlb_split(), holding:
- mmap lock (exclusively)
- VMA lock
- file rmap lock (exclusively)
2. hugetlb_unshare_all_pmds(), which I think is designed to be able to
call us with only the mmap lock held (in shared mode), but currently
only runs while holding mmap lock (exclusively) and VMA lock
Backporting note:
This commit fixes a racy protection that was introduced in commit
b30c14cd6102 ("hugetlb: unshare some PMDs when splitting VMAs"); that
commit claimed to fix an issue introduced in 5.13, but it should actually
also go all the way back.
[jannh@google.com: v2]
Link: https://lkml.kernel.org/r/20250528-hugetlb-fixes-splitrace-v2-1-1329349bad1a@google.com
Link: https://lkml.kernel.org/r/20250528-hugetlb-fixes-splitrace-v2-0-1329349bad1a@google.com
Link: https://lkml.kernel.org/r/20250527-hugetlb-fixes-splitrace-v1-1-f4136f5ec58a@google.com
Fixes: 39dde65c9940 ("[PATCH] shared page table for hugetlb page")
Signed-off-by: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org> [b30c14cd6102: hugetlb: unshare some PMDs when splitting VMAs]
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add test about uprobe pte be orphan during vma merge.
[akpm@linux-foundation.org: include sys/syscall.h, per Lorenzo]
Link: https://lkml.kernel.org/r/20250529155650.4017699-5-pulehui@huaweicloud.com
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Extract read_sysfs and write_sysfs into vm_util. Meanwhile, rename the
function in thuge-gen that has the same name as read_sysfs.
Link: https://lkml.kernel.org/r/20250529155650.4017699-4-pulehui@huaweicloud.com
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux into for-next
riscv patches for 6.16-rc1, part 2
* Performance improvements
- Add support for vdso getrandom
- Implement raid6 calculations using vectors
- Introduce svinval tlb invalidation
* Cleanup
- A bunch of deduplication of the macros we use for manipulating instructions
* Misc
- Introduce a kunit test for kprobes
- Add support for mseal as riscv fits the requirements (thanks to Lorenzo for making sure of that :))
[Palmer: There was a rebase between part 1 and part 2, so I've had to do
some more git surgery here... at least two rounds of surgery...]
* alex-pr-2: (866 commits)
RISC-V: vDSO: Wire up getrandom() vDSO implementation
riscv: enable mseal sysmap for RV64
raid6: Add RISC-V SIMD syndrome and recovery calculations
riscv: mm: Add support for Svinval extension
riscv: Add kprobes KUnit test
riscv: kprobes: Remove duplication of RV_EXTRACT_ITYPE_IMM
riscv: kprobes: Remove duplication of RV_EXTRACT_UTYPE_IMM
riscv: kprobes: Remove duplication of RV_EXTRACT_RD_REG
riscv: kprobes: Remove duplication of RVC_EXTRACT_BTYPE_IMM
riscv: kprobes: Remove duplication of RVC_EXTRACT_C2_RS1_REG
riscv: kproves: Remove duplication of RVC_EXTRACT_JTYPE_IMM
riscv: kprobes: Remove duplication of RV_EXTRACT_BTYPE_IMM
riscv: kprobes: Remove duplication of RV_EXTRACT_RS1_REG
riscv: kprobes: Remove duplication of RV_EXTRACT_JTYPE_IMM
riscv: kprobes: Move branch_funct3 to insn.h
riscv: kprobes: Move branch_rs2_idx to insn.h
Linux 6.15-rc6
Input: xpad - fix xpad_device sorting
Input: xpad - add support for several more controllers
Input: xpad - fix Share button on Xbox One controllers
...
|
|
Hook up the generic vDSO implementation to the generic vDSO getrandom
implementation by providing the required __arch_chacha20_blocks_nostack
and getrandom_syscall implementations. Also wire up the selftests.
The benchmark result:
vdso: 25000000 times in 2.466341333 seconds
libc: 25000000 times in 41.447720005 seconds
syscall: 25000000 times in 41.043926672 seconds
vdso: 25000000 x 256 times in 162.286219353 seconds
libc: 25000000 x 256 times in 2953.855018685 seconds
syscall: 25000000 x 256 times in 2796.268546000 seconds
[ alex: - Fix dynamic relocation
- Squash Nathan's fix https://lore.kernel.org/all/20250423-riscv-fix-compat_vdso-lld-v2-1-b7bbbc244501@kernel.org/
- Add comment from Loongarch ]
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Link: https://lore.kernel.org/r/20250411024600.16045-1-xry111@xry111.site
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN, wireless, Bluetooth, and Netfilter.
Current release - regressions:
- Revert "kunit: configs: Enable CONFIG_INIT_STACK_ALL_PATTERN in
all_tests", makes kunit error out if compiler is old
- wifi: iwlwifi: mvm: fix assert on suspend
- rxrpc: fix return from none_validate_challenge()
Current release - new code bugs:
- ovpn: couple of fixes for socket cleanup and UDP-tunnel teardown
- can: kvaser_pciefd: refine error prone echo_skb_max handling logic
- fix net_devmem_bind_dmabuf() stub when DEVMEM not compiled
- eth: airoha: fixes for config / accel in bridge mode
Previous releases - regressions:
- Bluetooth: hci_qca: move the SoC type check to the right place, fix
GPIO integration
- prevent a NULL deref in rtnl_create_link() after locking changes
- fix udp gso skb_segment after pull from frag_list
- hv_netvsc: fix potential deadlock in netvsc_vf_setxdp()
Previous releases - always broken:
- netfilter:
- nf_nat: also check reverse tuple to obtain clashing entry
- nf_set_pipapo_avx2: fix initial map fill (zeroing)
- fix the helper for incremental update of packet checksums after
modifying the IP address, used by ILA and BPF
- eth:
- stmmac: prevent div by 0 when clock rate is misconfigured
- ice: fix Tx scheduler handling of XDP and changing queue count
- eth: fix support for the RGMII interface when delays configured"
* tag 'net-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
calipso: unlock rcu before returning -EAFNOSUPPORT
seg6: Fix validation of nexthop addresses
net: prevent a NULL deref in rtnl_create_link()
net: annotate data-races around cleanup_net_task
selftests: drv-net: tso: make bkg() wait for socat to quit
selftests: drv-net: tso: fix the GRE device name
selftests: drv-net: add configs for the TSO test
wireguard: device: enable threaded NAPI
netlink: specs: rt-link: decode ip6gre
netlink: specs: rt-link: add missing byte-order properties
net: wwan: mhi_wwan_mbim: use correct mux_id for multiplexing
wifi: cfg80211/mac80211: correctly parse S1G beacon optional elements
net: dsa: b53: do not touch DLL_IQQD on bcm53115
net: dsa: b53: allow RGMII for bcm63xx RGMII ports
net: dsa: b53: do not configure bcm63xx's IMP port interface
net: dsa: b53: do not enable RGMII delay on bcm63xx
net: dsa: b53: do not enable EEE on bcm63xx
net: ti: icssg-prueth: Fix swapped TX stats for MII interfaces.
selftests: netfilter: nft_nat.sh: add test for reverse clash with nat
netfilter: nf_nat: also check reverse tuple to obtain clashing entry
...
|
|
RISCV ELF use mapping symbols with special names $x, $d to
identify regions of RISCV code or code with different ISAs[1].
These symbols don't identify functions, so will confuse the
perf output.
The patch filters out these symbols at load time, similar to
"4886f2ca perf symbols: Ignore mapping symbols on aarch64".
[1] https://github.com/riscv-non-isa/riscv-elf-psabi-doc/blob/
master/riscv-elf.adoc#mapping-symbol
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250409025202.201046-1-haibo1.xu@intel.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
|
|
Commit 846742f7e32f ("selftests: drv-net: add a warning for
bkg + shell + terminate") added a warning for bkg() used
with terminate=True. The tso test was missed as we didn't
have it running anywhere in NIPA. Add exit_wait=True, to avoid:
# Warning: combining shell and terminate is risky!
# SIGTERM may not reach the child on zsh/ksh!
getting printed twice for every variant.
Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250604012055.891431-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The device type for IPv4 GRE is "gre" not "ipgre",
unlike for IPv6 which uses "ip6gre".
Not sure how I missed this when writing the test, perhaps
because all HW I have access to is on an IPv6-only network.
Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test")
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250604012031.891242-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add missing config options for the tso.py test, specifically
to make sure the kernel is built with vxlan and gre tunnels.
I noticed this while adding a TSO-capable device QEMU to the CI.
Previously we only run virtio tests and it doesn't report LSO
stats on the QEMU we have.
Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250604001653.853008-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Zero out the remainder in nft_pipapo AVX2 implementation, otherwise
next lookup could bogusly report a mismatch. This is followed by two
patches to update nft_pipapo selftests to cover for the previous bug.
From Florian Westphal.
2) Check for reverse tuple too in case of esoteric NAT collisions for
UDP traffic and extend selftest coverage. Also from Florian.
netfilter pull request 25-06-05
* tag 'nf-25-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: nft_nat.sh: add test for reverse clash with nat
netfilter: nf_nat: also check reverse tuple to obtain clashing entry
selftests: netfilter: nft_concat_range.sh: add datapath check for map fill bug
selftests: netfilter: nft_concat_range.sh: prefer per element counters for testing
netfilter: nf_set_pipapo_avx2: fix initial map fill
====================
Link: https://patch.msgid.link/20250605085735.52205-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Antonio Quartulli says:
====================
In this batch you can find the following bug fixes:
Patch 1: when releasing a UDP socket we were wrongly invoking
setup_udp_tunnel_sock() with an empty config. This was not
properly shutting down the UDP encap state.
With this patch we simply undo what was done during setup.
Patch 2: ovpn was holding a reference to a 'struct socket'
without increasing its reference counter. This was intended
and worked as expected until we hit a race condition where
user space tries to close the socket while kernel space is
also releasing it. In this case the (struct socket *)->sk
member would disappear under our feet leading to a null-ptr-deref.
This patch fixes this issue by having struct ovpn_socket hold
a reference directly to the sk member while also increasing
its reference counter.
Patch 3: in case of errors along the TCP RX path (softirq)
we want to immediately delete the peer, but this operation may
sleep. With this patch we move the peer deletion to a scheduled
worker.
Patch 4 and 5 are instead fixing minor issues in the ovpn
kselftests.
* tag 'ovpn-net-20250603' of https://github.com/OpenVPN/ovpn-net-next:
selftest/net/ovpn: fix missing file
selftest/net/ovpn: fix TCP socket creation
ovpn: avoid sleep in atomic context in TCP RX error path
ovpn: ensure sk is still valid during cleanup
ovpn: properly deconfigure UDP-tunnel
====================
Link: https://patch.msgid.link/20250603111110.4575-1-antonio@openvpn.net/
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This will fail without the previous bug fix because we erronously
believe that the clashing entry went way.
However, the clash exists in the opposite direction due to an
existing nat mapping:
PASS: IP statless for ns2-LgTIuS
ERROR: failed to test udp ns1-x4iyOW to ns2-LgTIuS with dnat rule step 2, result: ""
This is partially adapted from test instructions from the below
ubuntu tracker.
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2109889
Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: Shaun Brady <brady.1345@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
commit 0935ee6032df ("selftests: netfilter: add test case for recent mismatch bug")
added a regression check for incorrect initial fill of the result map
that was fixed with 791a615b7ad2 ("netfilter: nf_set_pipapo: fix initial map fill").
The test used 'nft get element', i.e., control plane checks for
match/nomatch results.
The control plane however doesn't use avx2 version, so we need to
send+match packets.
As the additional packet match/nomatch is slow, don't do this for
every element added/removed: add and use maybe_send_(no)match
helpers and use them.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
testing
The selftest uses following rule:
... @test counter name "test"
Then sends a packet, then checks if the named counter did increment or
not.
This is fine for the 'no-match' test case: If anything matches the
counter increments and the test fails as expected.
But for the 'should match' test cases this isn't optimal.
Consider buggy matching, where the packet matches entry x, but it
should have matched entry y.
In that case the test would erronously pass.
Rework the selftest to use per-element counters to avoid this.
After sending packet that should have matched entry x, query the
relevant element via 'nft reset element' and check that its counter
had incremented.
The 'nomatch' case isn't altered, no entry should match so the named
counter must be 0, changing it to the per-element counter would then
pass if another entry matches.
The downside of this change is a slight increase in test run-time by
a few seconds.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- KUnit '#[test]'s:
- Support KUnit-mapped 'assert!' macros.
The support that landed last cycle was very basic, and the
'assert!' macros panicked since they were the standard library
ones. Now, they are mapped to the KUnit ones in a similar way to
how is done for doctests, reusing the infrastructure there.
With this, a failing test like:
#[test]
fn my_first_test() {
assert_eq!(42, 43);
}
will report:
# my_first_test: ASSERTION FAILED at rust/kernel/lib.rs:251
Expected 42 == 43 to be true, but is false
# my_first_test.speed: normal
not ok 1 my_first_test
- Support tests with checked 'Result' return types.
The return value of test functions that return a 'Result' will
be checked, thus one can now easily catch errors when e.g. using
the '?' operator in tests.
With this, a failing test like:
#[test]
fn my_test() -> Result {
f()?;
Ok(())
}
will report:
# my_test: ASSERTION FAILED at rust/kernel/lib.rs:321
Expected is_test_result_ok(my_test()) to be true, but is false
# my_test.speed: normal
not ok 1 my_test
- Add 'kunit_tests' to the prelude.
- Clarify the remaining language unstable features in use.
- Compile 'core' with edition 2024 for Rust >= 1.87.
- Workaround 'bindgen' issue with forward references to 'enum' types.
- objtool: relax slice condition to cover more 'noreturn' functions.
- Use absolute paths in macros referencing 'core' and 'kernel'
crates.
- Skip '-mno-fdpic' flag for bindgen in GCC 32-bit arm builds.
- Clean some 'doc_markdown' lint hits -- we may enable it later on.
'kernel' crate:
- 'alloc' module:
- 'Box': support for type coercion, e.g. 'Box<T>' to 'Box<dyn U>'
if 'T' implements 'U'.
- 'Vec': implement new methods (prerequisites for nova-core and
binder): 'truncate', 'resize', 'clear', 'pop',
'push_within_capacity' (with new error type 'PushError'),
'drain_all', 'retain', 'remove' (with new error type
'RemoveError'), insert_within_capacity' (with new error type
'InsertError').
In addition, simplify 'push' using 'spare_capacity_mut', split
'set_len' into 'inc_len' and 'dec_len', add type invariant 'len
<= capacity' and simplify 'truncate' using 'dec_len'.
- 'time' module:
- Morph the Rust hrtimer subsystem into the Rust timekeeping
subsystem, covering delay, sleep, timekeeping, timers. This new
subsystem has all the relevant timekeeping C maintainers listed
in the entry.
- Replace 'Ktime' with 'Delta' and 'Instant' types to represent a
duration of time and a point in time.
- Temporarily add 'Ktime' to 'hrtimer' module to allow 'hrtimer'
to delay converting to 'Instant' and 'Delta'.
- 'xarray' module:
- Add a Rust abstraction for the 'xarray' data structure. This
abstraction allows Rust code to leverage the 'xarray' to store
types that implement 'ForeignOwnable'. This support is a
dependency for memory backing feature of the Rust null block
driver, which is waiting to be merged.
- Set up an entry in 'MAINTAINERS' for the XArray Rust support.
Patches will go to the new Rust XArray tree and then via the
Rust subsystem tree for now.
- Allow 'ForeignOwnable' to carry information about the pointed-to
type. This helps asserting alignment requirements for the
pointer passed to the foreign language.
- 'container_of!': retain pointer mut-ness and add a compile-time
check of the type of the first parameter ('$field_ptr').
- Support optional message in 'static_assert!'.
- Add C FFI types (e.g. 'c_int') to the prelude.
- 'str' module: simplify KUnit tests 'format!' macro, convert
'rusttest' tests into KUnit, take advantage of the '-> Result'
support in KUnit '#[test]'s.
- 'list' module: add examples for 'List', fix path of
'assert_pinned!' (so far unused macro rule).
- 'workqueue' module: remove 'HasWork::OFFSET'.
- 'page' module: add 'inline' attribute.
'macros' crate:
- 'module' macro: place 'cleanup_module()' in '.exit.text' section.
'pin-init' crate:
- Add 'Wrapper<T>' trait for creating pin-initializers for wrapper
structs with a structurally pinned value such as 'UnsafeCell<T>' or
'MaybeUninit<T>'.
- Add 'MaybeZeroable' derive macro to try to derive 'Zeroable', but
not error if not all fields implement it. This is needed to derive
'Zeroable' for all bindgen-generated structs.
- Add 'unsafe fn cast_[pin_]init()' functions to unsafely change the
initialized type of an initializer. These are utilized by the
'Wrapper<T>' implementations.
- Add support for visibility in 'Zeroable' derive macro.
- Add support for 'union's in 'Zeroable' derive macro.
- Upstream dev news: streamline CI, fix some bugs. Add new workflows
to check if the user-space version and the one in the kernel tree
have diverged. Use the issues tab [1] to track them, which should
help folks report and diagnose issues w.r.t. 'pin-init' better.
[1] https://github.com/rust-for-linux/pin-init/issues
Documentation:
- Testing: add docs on the new KUnit '#[test]' tests.
- Coding guidelines: explain that '///' vs. '//' applies to private
items too. Add section on C FFI types.
- Quick Start guide: update Ubuntu instructions and split them into
"25.04" and "24.04 LTS and older".
And a few other cleanups and improvements"
* tag 'rust-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (78 commits)
rust: list: Fix typo `much` in arc.rs
rust: check type of `$ptr` in `container_of!`
rust: workqueue: remove HasWork::OFFSET
rust: retain pointer mut-ness in `container_of!`
Documentation: rust: testing: add docs on the new KUnit `#[test]` tests
Documentation: rust: rename `#[test]`s to "`rusttest` host tests"
rust: str: take advantage of the `-> Result` support in KUnit `#[test]`'s
rust: str: simplify KUnit tests `format!` macro
rust: str: convert `rusttest` tests into KUnit
rust: add `kunit_tests` to the prelude
rust: kunit: support checked `-> Result`s in KUnit `#[test]`s
rust: kunit: support KUnit-mapped `assert!` macros in `#[test]`s
rust: make section names plural
rust: list: fix path of `assert_pinned!`
rust: compile libcore with edition 2024 for 1.87+
rust: dma: add missing Markdown code span
rust: task: add missing Markdown code spans and intra-doc links
rust: pci: fix docs related to missing Markdown code spans
rust: alloc: add missing Markdown code span
rust: alloc: add missing Markdown code spans
...
|
|
Pull bpf fixes from Alexei Starovoitov:
"Two small fixes to selftests"
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Fix selftest btf_tag/btf_type_tag_percpu_vmlinux_helper failure
selftests/bpf: Fix bpf selftest build error
|
|
Some failure modes are handled poorly by kublk. For example, if ublk_drv
is built as a module but not currently loaded into the kernel, ./kublk
add ... just hangs forever. This happens because in this case (and a few
others), the worker process does not notify its parent (via a write to
the shared eventfd) that it has tried and failed to initialize, so the
parent hangs forever. Fix this by ensuring that we always notify the
parent process of any initialization failure, and have the parent print
a (not very descriptive) log line when this happens.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250603-ublk_init_fail-v1-1-87c91486230e@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Arnaldo Carvalho de Melo:
"perf report/top/annotate TUI:
- Accept the left arrow key as a Zoom out if done on the first column
- Show if source code toggle status in title, to help spotting bugs
with the various disassemblers (capstone, llvm, objdump)
- Provide feedback on unhandled hotkeys
Build:
- Better inform when certain features are not available with warnings
in the build process and in 'perf version --build-options' or 'perf -vv'
perf record:
- Improve the --off-cpu code by synthesizing events for switch-out ->
switch-in intervals using a BPF program. This can be fine tuned
using a --off-cpu-thresh knob
perf report:
- Add 'tgid' sort key
perf mem/c2c:
- Add 'op', 'cache', 'snoop', 'dtlb' output fields
- Add support for 'ldlat' on AMD IBS (Instruction Based Sampling)
perf ftrace:
- Use process/session specific trace settings instead of messing with
the global ftrace knobs
perf trace:
- Implement syscall summary in BPF
- Support --summary-mode=cgroup
- Always print return value for syscalls returning a pid
- The rseq and set_robust_list don't return a pid, just -errno
perf lock contention:
- Symbolize zone->lock using BTF
- Add -J/--inject-delay option to estimate impact on application
performance by optimization of kernel locking behavior
perf stat:
- Improve hybrid support for the NMI watchdog warning
Symbol resolution:
- Handle 'u' and 'l' symbols in /proc/kallsyms, resolving some Rust
symbols
- Improve Rust demangler
Hardware tracing:
Intel PT:
- Fix PEBS-via-PT data_src
- Do not default to recording all switch events
- Fix pattern matching with python3 on the SQL viewer script
arm64:
- Fixups for the hip08 hha PMU
Vendor events:
- Update Intel events/metrics files for alderlake, alderlaken,
arrowlake, bonnell, broadwell, broadwellde, broadwellx,
cascadelakex, clearwaterforest, elkhartlake, emeraldrapids,
grandridge, graniterapids, haswell, haswellx, icelake, icelakex,
ivybridge, ivytown, jaketown, lunarlake, meteorlake, nehalemep,
nehalemex, rocketlake, sandybridge, sapphirerapids, sierraforest,
skylake, skylakex, snowridgex, tigerlake, westmereep-dp,
westmereep-sp, westmereep-sx
python support:
- Add support for event counts in the python binding, add a
counting.py example
perf list:
- Display the PMU name associated with a perf metric in JSON
perf test:
- Hybrid improvements for metric value validation test
- Fix LBR test by ignoring idle task
- Add AMD IBS sw filter ana d'ldlat' tests
- Add 'perf trace --summary-mode=cgroup' test
- Add tests for the various language symbol demanglers
Miscellaneous:
- Allow specifying the cpu an event will be tied using '-e
event/cpu=N/'
- Sync various headers with the kernel sources
- Add annotations to use clang's -Wthread-safety and fix some
problems it detected
- Make dump_stack() use perf's symbol resolution to provide better
backtraces
- Intel TPEBS support cleanups and fixes. TPEBS stands for Timed PEBS
(Precision Event-Based Sampling), that adds timing info, the
retirement latency of instructions
- Various memory allocation (some detected by ASAN) and reference
counting fixes
- Add a 8-byte aligned PERF_RECORD_COMPRESSED2 to replace
PERF_RECORD_COMPRESSED
- Skip unsupported event types in perf.data files, don't stop when
finding one
- Improve lookups using hashmaps and binary searches"
* tag 'perf-tools-for-v6.16-1-2025-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (206 commits)
perf callchain: Always populate the addr_location map when adding IP
perf lock contention: Reject more than 10ms delays for safety
perf trace: Set errpid to false for rseq and set_robust_list
perf symbol: Move demangling code out of symbol-elf.c
perf trace: Always print return value for syscalls returning a pid
perf script: Print PERF_AUX_FLAG_COLLISION flag
perf mem: Show absolute percent in mem_stat output
perf mem: Display sort order only if it's available
perf mem: Describe overhead calculation in brief
perf record: Fix incorrect --user-regs comments
Revert "perf thread: Ensure comm_lock held for comm_list"
perf test trace_summary: Skip --bpf-summary tests if no libbpf
perf test intel-pt: Skip jitdump test if no libelf
perf intel-tpebs: Avoid race when evlist is being deleted
perf test demangle-java: Don't segv if demangling fails
perf symbol: Fix use-after-free in filename__read_build_id
perf pmu: Avoid segv for missing name/alias_name in wildcarding
perf machine: Factor creating a "live" machine out of dwarf-unwind
perf test: Add AMD IBS sw filter test
perf mem: Count L2 HITM for c2c statistic
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) updates from Dave Jiang:
- Remove always true condition in cxl features code
- Add verification of CHBS length for CXL 2.0
- Ignore interleave granularity when interleave ways is 1
- Add update addressing mising MODULE_DESCRIPTION for cxl_test
- A series of cleanups/refactor to prep for AMD Zen5 translate code
- Clean %pa debug printk in core/hdm.c
- Documentation updates:
- Update to CXL Maturity Map
- Fixes to source linking in CXL documentation
- CXL documentation fixes, spelling corrections
- A large collection of CXL documentation for the entire CXL
subsystem, including documentation on CXL related platform and
firmware notes
- Remove redundant code of cxlctl_get_supported_features()
- Series to support CXL RAS Features
- Including "Patrol Scrub Control", "Error Check Scrub",
"Performance Maitenance" and "Memory Sparing". The series
connects CXL to EDAC.
* tag 'cxl-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (53 commits)
cxl/edac: Add CXL memory device soft PPR control feature
cxl/edac: Add CXL memory device memory sparing control feature
cxl/edac: Support for finding memory operation attributes from the current boot
cxl/edac: Add support for PERFORM_MAINTENANCE command
cxl/edac: Add CXL memory device ECS control feature
cxl/edac: Add CXL memory device patrol scrub control feature
cxl: Update prototype of function get_support_feature_info()
EDAC: Update documentation for the CXL memory patrol scrub control feature
cxl/features: Remove the inline specifier from to_cxlfs()
cxl/feature: Remove redundant code of get supported features
docs: ABI: Fix "firwmare" to "firmware"
cxl/Documentation: Fix typo in sysfs write_bandwidth attribute path
cxl: doc/linux/access-coordinates Update access coordinates calculation methods
cxl: docs/platform/acpi/srat Add generic target documentation
cxl: docs/platform/cdat reference documentation
Documentation: Update the CXL Maturity Map
cxl: Sync up the driver-api/cxl documentation
cxl: docs - add self-referencing cross-links
cxl: docs/allocation/hugepages
cxl: docs/allocation/reclaim
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Support for Virtual Trust Level (VTL) on arm64 (Roman Kisel)
- Fixes for Hyper-V UIO driver (Long Li)
- Fixes for Hyper-V PCI driver (Michael Kelley)
- Select CONFIG_SYSFB for Hyper-V guests (Michael Kelley)
- Documentation updates for Hyper-V VMBus (Michael Kelley)
- Enhance logging for hv_kvp_daemon (Shradha Gupta)
* tag 'hyperv-next-signed-20250602' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (23 commits)
Drivers: hv: Always select CONFIG_SYSFB for Hyper-V guests
Drivers: hv: vmbus: Add comments about races with "channels" sysfs dir
Documentation: hyperv: Update VMBus doc with new features and info
PCI: hv: Remove unnecessary flex array in struct pci_packet
Drivers: hv: Remove hv_alloc/free_* helpers
Drivers: hv: Use kzalloc for panic page allocation
uio_hv_generic: Align ring size to system page
uio_hv_generic: Use correct size for interrupt and monitor pages
Drivers: hv: Allocate interrupt and monitor pages aligned to system page boundary
arch/x86: Provide the CPU number in the wakeup AP callback
x86/hyperv: Fix APIC ID and VP index confusion in hv_snp_boot_ap()
PCI: hv: Get vPCI MSI IRQ domain from DeviceTree
ACPI: irq: Introduce acpi_get_gsi_dispatcher()
Drivers: hv: vmbus: Introduce hv_get_vmbus_root_device()
Drivers: hv: vmbus: Get the IRQ number from DeviceTree
dt-bindings: microsoft,vmbus: Add interrupt and DMA coherence properties
arm64, x86: hyperv: Report the VTL the system boots in
arm64: hyperv: Initialize the Virtual Trust Level field
Drivers: hv: Provide arch-neutral implementation of get_vtl()
Drivers: hv: Enable VTL mode for arm64
...
|
|
test-large-mtu.sh is referenced by the Makefile
but does not exist.
Add it along the other scripts.
Fixes: 944f8b6abab6 ("selftest/net/ovpn: extend coverage with more test cases")
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
TCP sockets cannot be created with AF_UNSPEC, but
one among the supported family must be used.
Since commit 944f8b6abab6 ("selftest/net/ovpn: extend
coverage with more test cases") the default address
family for all tests was changed from AF_INET to AF_UNSPEC,
thus breaking all TCP cases.
Restore AF_INET as default address family for TCP listeners.
Fixes: 944f8b6abab6 ("selftest/net/ovpn: extend coverage with more test cases")
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
We have the logic to include net/lib automatically for net related
selftests. However, currently, this logic is only in install target
which means only `make install` will have net/lib included. This commit
adds the logic to all target so that all `make`, `make run_tests` and
`make install` will have net/lib included in net related selftests.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://patch.msgid.link/20250601142914.13379-1-minhquangbui99@gmail.com
Fixes: b86761ff6374 ("selftests: net: add scaffolding for Netlink tests in Python")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
