| Age | Commit message (Collapse) | Author |
|---|
|
It's always TEST_TIMEOUT_SEC, with an unjustified exception in rst test,
that is more paranoia-long timeout rather than based on requirements.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20250319-tcp-ao-selftests-polling-v2-7-da48040153d1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Unused: it's always either the default timeout or asynchronous
connect().
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20250319-tcp-ao-selftests-polling-v2-6-da48040153d1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, tcp_ao tests have two timeouts: TEST_RETRANSMIT_SEC and
TEST_TIMEOUT_SEC [by default 1 and 5 seconds]. The first one,
TEST_RETRANSMIT_SEC is used for operations that are expected to succeed
in order for a test to pass. It is usually not consumed and exists only
to avoid indefinite test run if the operation didn't complete.
The second one, TEST_RETRANSMIT_SEC exists for the tests that checking
operations, that are expected to fail/timeout. It is shorter as it is
fully consumed, with an expectation that if operation didn't succeed
during that period, it will timeout. And the related test that expects
the timeout is passing. The actual operation failure is then
cross-verified by other means like counters checks.
The issue with TEST_RETRANSMIT_SEC timeout is that 1 second is the exact
initial TCP timeout. So, in case the initial segment gets lost (quite
unlikely on local veth interface between two net namespaces, yet happens
in slow VMs), the retransmission never happens and as a result, the test
is not actually testing the functionality. Which in the end fails
counters checks.
As I want tcp_ao selftests to be fast and finishing in a reasonable
amount of time on manual run, I didn't consider increasing
TEST_RETRANSMIT_SEC.
Rather, initially, BPF_SOCK_OPS_TIMEOUT_INIT looked promising as a lever
to make the initial TCP timeout shorter. But as it's not a socket bpf
attached thing, but sock_ops (attaches to cgroups), the selftests would
have to use libbpf, which I wanted to avoid if not absolutely required.
Instead, use a mixed select() and counters polling mode with the longer
TEST_TIMEOUT_SEC timeout to detect running-away failed tests. It
actually not only allows losing segments and succeeding after
the previous TEST_RETRANSMIT_SEC timeout was consumed, but makes
the tests expecting timeout/failure pass faster.
The only test case taking longer (TEST_TIMEOUT_SEC) now is connect-deny
"wrong snd id", which checks for no key on SYN-ACK for which there is no
counter in the kernel (see tcp_make_synack()). Yet it can be speed up
by poking skpair from the trace event (see trace_tcp_ao_synack_no_key).
Fixes: ed9d09b309b1 ("selftests/net: Add a test for TCP-AO keys matching")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20241205070656.6ef344d7@kernel.org/
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20250319-tcp-ao-selftests-polling-v2-4-da48040153d1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are related TCP-MD5 <=> TCP and TCP-MD5 <=> TCP-AO tests
that can benefit from checking the related counters, not only from
validating operations timeouts.
It also prepares the code for introduction of mixed select()+poll mode,
see the follow-up patches.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20250319-tcp-ao-selftests-polling-v2-3-da48040153d1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rename __test_tcp_ao_counters_cmp() into test_assert_counters_ao() and
test_tcp_ao_key_counters_cmp() into test_assert_counters_key() as they
are asserts, rather than just compare functions.
Provide test_cmp_counters() helper, that's going to be used to compare
ao_info and netns counters as a stop condition for polling the sockets.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20250319-tcp-ao-selftests-polling-v2-2-da48040153d1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Before:
># 13145[lib/ftrace-tcp.c:427] trace event filter tcp_ao_key_not_found [2001:db8:1::1:-1 => 2001:db8:254::1:7010, L3index 0, flags: !FS!R!P!., keyid: 100, rnext: 100, maclen: -1, sne: -1] = 1
After:
># 13487[lib/ftrace-tcp.c:427] trace event filter tcp_ao_key_not_found [2001:db8:1::1:-1 => 2001:db8:254::1:7010, L3index 0, flags: S, keyid: 100, rnext: 100, maclen: -1, sne: -1] = 1
For the history, I think the initial format was to emphasize the absence
of flags as well as their presence (!R meant no RST flag). But looking
again, it's just unreadable and hard to understand.
Make it the standard/expected one.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20250319-tcp-ao-selftests-polling-v2-1-da48040153d1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is no va_end after va_copy, just add it.
Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240927040050.7851-1-zhangjiao2@cmss.chinamobile.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Setup trace points, add a new ftrace instance in order to not interfere
with the rest of the system, filtering by net namespace cookies.
Raise a new background thread that parses trace_pipe, matches them with
the list of expected events.
Wiring up trace events to selftests provides another insight if there is
anything unexpected happining in the tcp-ao code (i.e. key rotation when
it's not expected).
Note: in real programs libtraceevent should be used instead of this
manual labor of setting ftrace up and parsing. I'm not using it here
as I don't want to have an .so library dependency that one would have to
bring into VM or DUT (Device Under Test). Please, don't copy it over
into any real world programs, that aren't tests.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-8-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The switch_save_ns() helper suppose to help switching to another
namespace for some action and to return back to original namespace.
The fd should be closed.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-5-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It turns to be that open_netns() is called rarely from the child-thread
and more often from parent-thread. Yet, on initialization of kconfig
checks, either of threads may reach kconfig_lock mutex first.
VRF-related checks do create a temporary ksft-check VRF in
an unshare()'d namespace and than setns() back to the original.
As original was opened from "/proc/self/ns/net", it's valid for
thread-leader (parent), but it's invalid for the child, resulting
in the following failure on tests that check has_vrfs() support:
> # ok 54 TCP-AO required on socket + TCP-MD5 key: prefailed as expected: Key was rejected by service
> # not ok 55 # error 381[unsigned-md5.c:24] Failed to add a VRF: -17
> # not ok 56 # error 383[unsigned-md5.c:33] Failed to add a route to VRF: -22: Key was rejected by service
> not ok 1 selftests: net/tcp_ao: unsigned-md5_ipv6 # exit=1
Use "/proc/thread-self/ns/net" which is valid for any thread.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-4-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Most of the functions in tcp-ao lib/ return negative errno or -1 in case
of a failure. That creates inconsistencies in lib/kconfig, which saves
what was the error code. As well as the uninitialized kconfig value is
-1, which also may be the result of a check.
Define KCONFIG_UNKNOWN and save negative return code, rather than
libc-style errno.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-3-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of pre-allocating a fixed-sized buffer of TEST_MSG_BUFFER_SIZE
and printing into it, call vsnprintf() with str = NULL, which will
return the needed size of the buffer. This hack is documented in
man 3 vsnprintf.
Essentially, in C++ terms, it re-invents std::stringstream, which is
going to be used to print different tracing paths and formatted strings.
Use it straight away in __test_print() - which is thread-safe version of
printing in selftests.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-2-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct copy'n'paste typo: the previous line already initialises get_all
to 1.
Reported-by: Nassiri, Mohammad <mnassiri@ciena.com>
Closes: https://lore.kernel.org/all/DM6PR04MB4202BC58A9FD5BDD24A16E8EC56F2@DM6PR04MB4202.namprd04.prod.outlook.com/
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-1-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On my new laptop with packages from nixos-unstable, gcc 12.3.0 produces
> lib/setup.c: In function ‘__test_msg’:
> lib/setup.c:20:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 20 | ksft_print_msg(buf);
> | ^~~~~~~~~~~~~~
> lib/setup.c: In function ‘__test_ok’:
> lib/setup.c:26:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 26 | ksft_test_result_pass(buf);
> | ^~~~~~~~~~~~~~~~~~~~~
> lib/setup.c: In function ‘__test_fail’:
> lib/setup.c:32:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 32 | ksft_test_result_fail(buf);
> | ^~~~~~~~~~~~~~~~~~~~~
> lib/setup.c: In function ‘__test_xfail’:
> lib/setup.c:38:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 38 | ksft_test_result_xfail(buf);
> | ^~~~~~~~~~~~~~~~~~~~~~
> lib/setup.c: In function ‘__test_error’:
> lib/setup.c:44:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 44 | ksft_test_result_error(buf);
> | ^~~~~~~~~~~~~~~~~~~~~~
> lib/setup.c: In function ‘__test_skip’:
> lib/setup.c:50:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 50 | ksft_test_result_skip(buf);
> | ^~~~~~~~~~~~~~~~~~~~~
> cc1: some warnings being treated as errors
As the buffer was already pre-printed into, print it as a string
rather than a format-string.
Fixes: cfbab37b3da0 ("selftests/net: Add TCP-AO library")
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
On my new laptop with packages from nixos-unstable, gcc 12.3.0 produces:
> lib/proc.c: In function ‘netstat_read_type’:
> lib/proc.c:89:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 89 | if (fscanf(fnetstat, type->header_name) == EOF)
> | ^~
> cc1: some warnings being treated as errors
Here the selftests lib parses header name, while expectes non-space word
ending with a column.
Fixes: cfbab37b3da0 ("selftests/net: Add TCP-AO library")
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, the test is racy and seems to not pass anymore.
In order to rectify it, aim on TCP_TW_RST.
Doesn't seem way too good with this sleep() part, but it seems as
a reasonable compromise for the test. There is a plan in-line comment on
how-to improve it, going to do it on the top, at this moment I want it
to run on netdev/patchwork selftests dashboard.
It also slightly changes tcp_ao-lib in order to get SO_ERROR propagated
to test_client_verify() return value.
Fixes: c6df7b2361d7 ("selftests/net: Add TCP-AO RST test")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Link: https://lore.kernel.org/r/20240130-tcp-ao-test-key-mgmt-v2-3-d190430a6c60@arista.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit f5769faeec36 ("net: Namespace-ify sysctl_optmem_max")
optmem_max is per-netns, so need of switching to root namespace.
It seems trivial to keep the old logic working, so going to keep it for
a while (at least, until kernel with netns-optmem_max will be release).
Currently, there is a test that checks that optmem_max limit applies to
TCP-AO keys and a little benchmark that measures linked-list TCP-AO keys
scaling, those are fixed by this.
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In unsigned-md5 selftests ip_route_add() is not needed in
client_add_ip(): the route was pre-setup in __test_init() => link_init()
for subnet, rather than a specific ip-address.
Currently, __ip_route_add() mistakenly always sets VRF table
to RT_TABLE_MAIN - this seems to have sneaked in during unsigned-md5
tests debugging. That also explains, why ip_route_add_vrf() ignored
EEXIST, returned by fib6.
Yet, keep EEXIST ignoring in bench-lookups selftests as it's expected
that those selftests may add the same (duplicate) routes.
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are a handful of spelling mistakes in test messages in the
TCP-AIO selftests. Fix these.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Check that both active and passive reset works and correctly sign
segments with TCP-AO or don't send RSTs if not possible to sign.
A listening socket with backlog = 0 gets one connection in accept
queue, another in syn queue. Once the server/listener socket is
forcibly closed, client sockets aren't connected to anything.
In regular situation they would receive RST on any segment, but
with TCP-AO as there's no listener, no AO-key and unknown ISNs,
no RST should be sent.
And "passive" reset, where RST is sent on reply for some segment
(tcp_v{4,6}_send_reset()) - there use TCP_REPAIR to corrupt SEQ numbers,
which later results in TCP-AO signed RST, which will be verified and
client socket will get EPIPE.
No TCPAORequired/TCPAOBad segments are expected during these tests.
Sample of the output:
> # ./rst_ipv4
> 1..15
> # 1462[lib/setup.c:254] rand seed 1686611171
> TAP version 13
> ok 1 servered 1000 bytes
> ok 2 Verified established tcp connection
> ok 3 sk[0] = 7, connection was reset
> ok 4 sk[1] = 8, connection was reset
> ok 5 sk[2] = 9
> ok 6 MKT counters are good on server
> ok 7 Verified established tcp connection
> ok 8 client connection broken post-seq-adjust
> ok 9 client connection was reset
> ok 10 No segments without AO sign (server)
> ok 11 Signed AO segments (server): 0 => 30
> ok 12 No segments with bad AO sign (server)
> ok 13 No segments without AO sign (client)
> ok 14 Signed AO segments (client): 0 => 30
> ok 15 No segments with bad AO sign (client)
> # Totals: pass:15 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Provide functions to create selftests dedicated to TCP-AO.
They can run in parallel, as they use temporary net namespaces.
They can be very specific to the feature being tested.
This will allow to create a lot of TCP-AO tests, without complicating
one binary with many --options and to create scenarios, that are
hard to put in bash script that uses one binary.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
