| Age | Commit message (Collapse) | Author |
|---|
|
Extend the `check_for_dependencies()` function in `lib_netcons.sh` to check
whether IPv6 is enabled by verifying the existence of
`/proc/net/if_inet6`. Having IPv6 is a now a dependency of netconsole
tests. If the file does not exist, the script will skip the test with an
appropriate message suggesting to verify if `CONFIG_IPV6` is enabled.
This prevents the test to misbehave if IPv6 is not configured.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250723-netcons_test_ipv6-v1-1-41c9092f93f9@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add IPv6 support to the netconsole basic functionality tests by:
- Introducing separate IPv4 and IPv6 address variables (SRCIP4/SRCIP6,
DSTIP4/DSTIP6) to replace the single SRCIP/DSTIP variables
- Adding select_ipv4_or_ipv6() function to choose protocol version
- Updating socat configuration to use UDP6-LISTEN for IPv6 tests
- Adding wait_for_port() wrapper to handle protocol-specific port waiting
- Expanding test matrix to run both basic and extended formats against
both IPv4 and IPv6 protocols
- Improving cleanup to kill any remaining socat processes
- Adding sleep delays for better IPv6 packet handling reliability
The test now validates netconsole functionality across both IP versions,
improving test coverage for dual-stack network environments.
This test would avoid the regression fixed by commit f59902070269 ("net:
netpoll: Initialize UDP checksum field before checksumming")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250702-netpoll_untagle_ip-v2-7-13cf3db24e2b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new selftest to verify netconsole module loading with command
line arguments. This test exercises the init_netconsole() path and
validates proper parsing of the netconsole= parameter format.
The test:
- Loads netconsole module with cmdline configuration instead of
dynamic reconfiguration
- Validates message transmission through the configured target
- Adds helper functions for cmdline string generation and module
validation
This complements existing netconsole selftests by covering the
module initialization code path that processes boot-time parameters.
This test is useful to test issues like the one described in [1].
Link: https://lore.kernel.org/netdev/Z36TlACdNMwFD7wv@dev-ushankar.dev.purestorage.com/ [1]
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250613-rework-v3-8-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extract the network device and namespace cleanup logic from the
cleanup() function into a new do_cleanup() helper in lib_netcons.sh.
The do_cleanup() function only unconfigure the network and
printk, while cleanup() cleans the netconsole targets plus the network
and printk.
This refactoring let this code to be reused in cases netconsole dynamic
is not being used, as in the upcoming patch.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250613-rework-v3-7-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend the netconsole selftest to validate both basic and extended
target formats. The basic format is a simpler variant that doesn't
support userdata or release functionality.
The test now validates that netconsole works correctly in both
configurations, improving test coverage for different netconsole
deployment scenarios.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250609-netcons_ext-v3-4-5336fa670326@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove the exit call from validate_result() function and move the
test exit logic to the main script. This allows the function to
be reused in scenarios where the test needs to continue execution
after validation, rather than terminating immediately.
The validate_result() function should focus on validation logic
only, while the calling script maintains control over program
flow and exit conditions. This change improves code modularity
and prepares for potential future enhancements where multiple
validations might be needed in a single test run.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250609-netcons_ext-v3-3-5336fa670326@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function wait_local_port_listen() is the only function defined in
net_helper.sh. Since some tests source both lib.sh and net_helper.sh,
we can simplify the setup by moving wait_local_port_listen() to lib.sh.
With this change, net_helper.sh becomes redundant and can be removed.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250526014600.9128-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new selftest to verify that the netconsole module correctly
handles CPU runtime data in sysdata. The test validates three scenarios:
1. Basic CPU sysdata functionality - verifies that cpu=X is appended to
messages
2. CPU sysdata with userdata - ensures CPU data works alongside userdata
3. Disabled CPU sysdata - confirms no CPU data is included when disabled
The test uses taskset to control which CPU sends messages and verifies
the reported CPU matches the one used. This helps ensure that netconsole
accurately tracks and reports the originating CPU of messages.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a new selftest to verify netconsole's handling of messages that
exceed the packet size limit and require fragmentation. The test sends
messages with varying sizes and userdata, validating that:
1. Large messages are correctly fragmented and reassembled
2. Userdata fields are properly preserved across fragments
3. Messages work correctly with and without kernel release version
appending
The test creates a networking environment using netdevsim, sends
messages through /dev/kmsg, and verifies the received fragments maintain
message integrity.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250203-netcons_frag_msgs-v1-1-5bc6bedf2ac0@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Modify the cleanup function to remove all userdata keys created during the
test, instead of just deleting a single predefined key. This ensures a
more thorough cleanup of temporary resources.
Move the KEY_PATH variable definition inside the set_user_data function
to reduce global variables and improve encapsulation. The KEY_PATH
variable is now dynamically created when setting user data.
This change has no effect on the current test, while improving an
upcoming test that would create several userdata entries.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250108-netcons_overflow_test-v3-3-3d85eb091bec@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Split helper functions from the netconsole basic test into a separate
library file to enable reuse across different netconsole tests. This
change only moves the existing helper functions to lib/sh/lib_netcons.sh
while preserving the same test functionality.
The helpers provide common functions for:
- Setting up network namespaces and interfaces
- Managing netconsole dynamic targets
- Setting user data
- Handling test dependencies
- Cleanup operations
Do not make any change in the code, other than the mechanical
separation.
Signed-off-by: Breno Leitao <leitao@debian.org>
Tested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250108-netcons_overflow_test-v3-2-3d85eb091bec@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
