| Age | Commit message (Collapse) | Author |
|---|
|
Merge series from Simon Trimmer <simont@opensource.cirrus.com>:
These two patches introduce a log message when provisioning the cs35l56
family of devices that uniquely identifies the firmware tuning.
|
|
The cs35l56 smart amplifier has some informational firmware controls
that are populated by a tuning bin file to unique values - logging these
during firmware load identifies the specific configuration being used on
that device instance.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/47762a5f1ce2b178ad863c6698296aea09b72e10.1747142267.git.simont@opensource.cirrus.com
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On CS35L63 the DIE_STS registers are populated by the Firmware from
OTP, so the driver can read these registers directly, rather than
obtaining them from OTP.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250407151842.143393-6-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
CS35L63 uses a similar control interface to CS35L56 so support for
it can be added into the CS35L56 driver.
New regmap configs have been added to support CS35L63.
CS35L63 only has SoundWire and I2C control interfaces.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250407151842.143393-5-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Registers to set Mute, Volume and Posture are inside firmware,
which means they should be added to the list of registers set inside
firmware, in case they vary across Device or Revision.
These three registers are also used for controls, so additional
handling is required to be able to obtain and set the register inside
ALSA controls.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250407151842.143393-4-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Firmware based registers may be different addresses across different
device ids and revision ids. Create a structure to store and access
these addresses.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250407151842.143393-3-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When SPI is used for control, the driver must hold the SPI bus lock
while issuing the sequence of writes to perform a soft reset.
>From the time the driver writes the SYSTEM_RESET command until the
driver does a write to terminate the reset, there must not be any
activity on the SPI bus lines. If there is any SPI activity during the
soft-reset, another soft-reset will be triggered. The state of the SPI
chip select is irrelevant.
A repeated soft-reset does not in itself cause any problems, and it is
not an infinite loop. The problem is a race between these resets and
the driver polling for boot completion. There is a time window between
soft resets where the driver could read HALO_STATE as 2 (fully booted)
while the chip is actually soft-resetting. Although this window is
small, it is long enough that it is possible to hit it in normal
operation.
To prevent this race and ensure the chip really is fully booted, the
driver calls spi_bus_lock() to prevent other activity while resetting.
It then issues the SYSTEM_RESET mailbox command. After allowing
sufficient time for reset to take effect, the driver issues a PING
mailbox command, which will force completion of the full soft-reset
sequence. The SPI bus lock can then be released. The mailbox is
checked for any boot or wakeup response from the firmware, before the
value in HALO_STATE will be trusted.
This does not affect SoundWire or I2C control.
Fixes: 8a731fd37f8b ("ASoC: cs35l56: Move utility functions to shared file")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250225131843.113752-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
cs35l56_force_sync_asp1_registers_from_cache()
Commit 5d7e328e20b3 ("ASoC: cs35l56: Revert support for dual-ownership
of ASP registers")
replaced cs35l56_force_sync_asp1_registers_from_cache() with a dummy
implementation so that the HDA driver would continue to build.
Remove the calls from HDA and remove the stub function.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241206105757.718750-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
It's now possible to declare instances of struct regmap_config as
const data.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20240822145535.336407-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the late-read buffer in the CS35L56 SoundWire interface to
read OTP memory.
The OTP memory has a longer access latency than chip registers
and cannot guarantee to return the data value in the SoundWire
control response if the bus clock is >4.8 MHz. The Cirrus
SoundWire peripheral IP exposes the bridge-to-bus read buffer
and status bits. For a read from OTP the bridge status bits are
polled to wait for the OTP data to be loaded into the read buffer
and the data is then read from there.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e1830f66f6c6 ("ASoC: cs35l56: Add helper functions for amp calibration")
Link: https://patch.msgid.link/20240805140839.26042-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Change CS35L56_MAIN_RENDER_USER_VOLUME_MAX to 48, to limit the maximum
value of the Speaker Volume control to +12dB. The minimum value is
unchanged so that the default 0dB has the same integer control value.
The original maximum of 400 (+100dB) was the largest value that can be
mathematically handled by the DSP. The actual maximum amplification is
+12dB.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20240703095517.208077-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
No product was ever released with A1 silicon so there is no
need for the driver to include support for it.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20240701104444.172556-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch reverts a series of commits that allowed for the ASP
registers to be owned by either the driver or the firmware. Nothing
currently depends on the functionality that is being reverted, so
it is safe to remove.
The commits being reverted are (last 3 are bugfixes to the first 2):
commit 72a77d7631c6
("ASoC: cs35l56: Fix to ensure ASP1 registers match cache")
commit 07f7d6e7a124
("ASoC: cs35l56: Fix for initializing ASP1 mixer registers")
commit 4703b014f28b
("ASoC: cs35l56: fix reversed if statement in cs35l56_dspwait_asp1tx_put()")
commit c14f09f010cc
("ASoC: cs35l56: Fix deadlock in ASP1 mixer register initialization")
commit dfd2ffb37399
("ASoC: cs35l56: Prevent overwriting firmware ASP config")
These reverts have been squashed into a single commit because there
would be no reason to revert only some of them (which would just
reintroduce bugs).
The changes introduced by the commits were well-intentioned but
somewhat misguided. ACPI does not provide any information about how
audio hardware is linked together, so that information has to be
hardcoded into drivers. On Windows the firmware is customized to
statically setup appropriate configuration of the audio links,
and the intent of the commits was to re-use this information if the
Linux host drivers aren't taking control of the ASP. This would
avoid having to hardcode the ASP config into the machine driver on
some systems.
However, this added complexity and race conditions into the driver.
It also complicates implementation of new code.
The only case where the ASP is used but the host is not taking
ownership is when CS35L56 is used in SoundWire mode with the ASP
as a reference audio interconnect. But even in that case it's not
necessarily required even if the firmware initialized it. Typically
it is used to avoid the host SDCA drivers having to be capable of
aggregating capture paths from multiple SoundWire peripherals. But
the SOF SoundWire support is capable of doing that aggregation.
Reverting all these commits significantly simplifies the driver.
Let's just use the normal Linux mechanisms of the machine driver and
ALSA controls to set things up instead of trying to use the firmware
to do use-case setup.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20240701104444.172556-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Only populate the ASP1 config registers in the regmap cache if the
ASP DAI is used. This prevents regcache_sync() from overwriting
these registers with their defaults when the firmware owns
control of these registers.
On a SoundWire system the ASP could be owned by the firmware to
share reference audio with the firmware on other cs35l56. Or it
can be used as a normal codec-codec interface owned by the driver.
The driver must not overwrite the registers if the firmware has
control of them.
The original implementation for this in commit 07f7d6e7a124
("ASoC: cs35l56: Fix for initializing ASP1 mixer registers") was
to still provide defaults for these registers, assuming that if
they were never reconfigured from defaults then regcache_sync()
would not write them out because they are not dirty. Unfortunately
regcache_sync() is not that smart. If the chip has not reset (so
the driver has not called regcache_mark_dirty()) a regcache_sync()
could write out registers that are not dirty.
To avoid accidental overwriting of the ASP registers, they are
removed from the table of defaults and instead are populated with
defaults only if one of the ASP DAI configuration functions is
called. So if the DAI has never been configured, the firmware is
assumed to have ownership of these registers, and the regmap cache
will not contain any entries for them.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 07f7d6e7a124 ("ASoC: cs35l56: Fix for initializing ASP1 mixer registers")
Link: https://msgid.link/r/20240408101803.43183-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.9
This has been quite a small release, there's a lot of driver specific
cleanups and minor enhancements but hardly anything on the core and only
one new driver. Highlights include:
- SoundWire support for AMD ACP 6.3 systems.
- Support for reporting version information for AVS firmware.
- Support DSPless mode for Intel Soundwire systems.
- Support for configuring CS35L56 amplifiers using EFI calibration
data.
- Log which component is being operated on as part of power management
trace events.
- Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x
|
|
The CS35L54 and CS35L57 are Boosted Smart Amplifiers. The CS35L54 has
I2C/SPI control and I2S/TDM audio. The CS35L57 also has SoundWire
control and audio.
The hardware differences between L54, L56 and L57 do not affect the
driver control interface so they can all be handled by the same driver.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240308135900.603192-2-rf@opensource.cirrus.com>
|
|
Adds some helper functions and data for applying amp calibration.
1. cs35l56_read_silicon_uid() to get the silicon ID that is used to
search for the correct calibration data entry.
2. Add the registers for the silicon ID to the readable registers.
3. cs35l56_get_calibration() wrapper around
cs_amp_get_efi_calibration_data()
4. cs35l56_calibration_controls() table of the firmware controls
for calibration data.
5. Added members to struct cs35l56_base to store the calibration
data.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240223153910.2063698-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The original 50ms timeout for firmware boot is not long enough for
worst-case time to reboot after a firmware download. Increase the
timeout to 250ms.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e49611252900 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-15-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If the "spk-id-gpios" property is present it points to GPIOs whose
value must be used to select the correct bin file to match the
speakers.
Some manufacturers use multiple sources of speakers, which need
different tunings for best performance. On these models the type of
speaker fitted is indicated by the values of one or more GPIOs. The
number formed by the GPIOs identifies the tuning required.
The speaker ID must be used in combination with the subsystem ID
(either from PCI SSID or cirrus,firmware-uid property), because the
GPIOs can only indicate variants of a specific model.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 1a1c3d794ef6 ("ASoC: cs35l56: Use PCI SSID as the firmware UID")
Link: https://msgid.link/r/20240129162737.497-14-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Check during initialization whether the firmware is already patched.
If so, include the firmware version in the wm_adsp fwf_name string.
If the firmware has already been patched by the BIOS the driver
can only replace it if it has control of hard RESET.
If the driver cannot replace the firmware, it can still load a wmfw
(for ALSA control definitions) and/or a bin (for additional tunings).
But these must match the version of firmware that is running on the
CS35L56.
The firmware is pre-patched if FIRMWARE_MISSING == 0.
Including the firmware version in the fwf_name string will
qualify the firmware file name:
Normal (unpatched or replaceable firmware):
cs35l56-rev-dsp1-misc[-system_name].[wmfw|bin]
Preloaded firmware:
cs35l56-rev[-s]-VVVVVV-dsp1-misc[-system_name].[wmfw|bin]
Where:
[-s] is an optional -s added into the name for a secured CS35L56
VVVVVV is the 24-bit firmware version in hexadecimal.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 608f1b0dbdde ("ASoC: cs35l56: Move DSP part string generation so that it is done only once")
Link: https://msgid.link/r/20240129162737.497-13-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a dummy SUPPLY widget connected to the ASP that forces the
chip registers to match the regmap cache when the ASP is
powered-up.
On a SoundWire system the ASP is free for use as a chip-to-chip
interconnect. This can be either for the firmware on multiple
CS35L56 to share reference audio; or as a bridge to another
device. If it is a firmware interconnect it is owned by the
firmware and the Linux driver should avoid writing the registers.
However. If it is a bridge then Linux may take over and handle
it as a normal codec-to-codec link.
CS35L56 is designed for SDCA and a generic SDCA driver would
know nothing about these chip-specific registers. So if the
ASP is being used on a SoundWire system the firmware sets up the
ASP registers. This means that we can't assume the default
state of the ASP registers. But we don't know the initial state
that the firmware set them to until after the firmware has been
downloaded and booted, which can take several seconds when
downloading multiple amps.
To avoid blocking probe() for several seconds waiting for the
firmware, the silicon defaults are assumed. This allows the machine
driver to setup the ASP configuration during probe() without being
blocked. If the ASP is hooked up and used, the SUPPLY widget
ensures that the chip registers match what was configured in the
regmap cache.
If the machine driver does not hook up the ASP, it is assumed that
it won't call any functions to configure the ASP DAI. Therefore
the regmap cache will be clean for these registers so a
regcache_sync() will not overwrite the chip registers. If the
DAI is not hooked up, the dummy SUPPLY widget will not be
invoked so it will never force-overwrite the chip registers.
Backport note:
This won't apply cleanly to kernels older than v6.6.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e49611252900 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-8-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As the dummy wake is a toggling signal (either I2C or SPI activity) it
is not guaranteed to meet the minimum asserted hold time for a wake
signal. In this case the wake must guarantee rising edges separated by
at least the minimum hold time.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231006111039.101914-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The two CS35L56_HIBERNATE_WAKE_* constants in cs35l56.h aren't used by
any of the driver code.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231003093418.21600-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move issuing of a CS35L56_MBOX_CMD_SHUTDOWN command and then waiting for
the DSP to reach CS35L56_HALO_STATE_SHUTDOWN in the register appropriate
for the hardware revision into a common function.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230721132120.5523-10-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move the waits for CS35L56_CONTROL_PORT_READY_US into a common
function, and also allow a wider range of allowed wait times.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230721132120.5523-9-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Part of the initialization code in cs35l56_init() can be re-used
by the HDA driver so move it into a new function in the shared
library.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230721132120.5523-8-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move the code that initialized the struct cs_dsp members
into the shared library so that the HDA driver can use it.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230721132120.5523-7-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The majority of runtime_suspend and runtime_resume handling
doesn't have anything specific to the ASoC driver, so can be
shared by the HDA driver. Move this code into the shared
library.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230721132120.5523-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move the cs35l56 utility functions into the shared file so they are
available for use in HDA.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230721132120.5523-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The ASoC and HDA drivers have structures that contain some of the same
information - instead of maintaining two locations for this data the
drivers should share a common data structure as this will enable common
utility functions to be created.
The first step is to move the location of these members in the ASoC
driver.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230721132120.5523-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The soft (firmware) registers for volume/mute/posture are not reset by
a chip soft-reset, so use a regmap patch to set them to defaults.
cs35l56_reread_firmware_registers() has been removed. Its intent was to
use whatever the firmware set as a default. But the driver now patches the
defaults to the registers.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230718144625.39634-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If the device is in secure mode it's unnecessary to send a SHUTDOWN and
SYSTEM_RESET around the firmware download. It could only be patching
insecure tunings. A tuning patch doesn't need a SHUTDOWN and only needs
a REINIT afterwards. This will reduce the overhead of exiting system
suspend in secure mode.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/Message-Id: <20230518150250.1121006-4-rf@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Rename the mixer source defines from CS35L56_INPUT_SRC_SWIRE_RXn
to CS35L56_INPUT_SRC_SWIRE_DP1_CHANNELn to match the latest
datasheet.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230418144309.1100721-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The mixer source index value for SDW2RX1 is different between
A1 and B0 silicon. As the driver doesn't provide a DAI for SDW2
just remove it as a mixer source option.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230418144309.1100721-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Reduce SDW1 to 4 channels and remove the controls for SDW1
TX5 and TX6.
The TX5 and TX6 channels have been removed from B0 silicon.
There is no need to support them on A1 silicon.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230418144309.1100721-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Check during cs35l56_system_resume() whether the firmware patch must
be applied again.
The FIRMWARE_MISSING flag in the PROTECTION_STATUS register indicates
whether the firmware has been patched.
In non-secure mode the FIRMWARE_MISSING flag is cleared at the end of
dsp_work(). If it is set after system-resume we know that dsp_work()
must be run again.
In secure mode the pre-OS loader will have done the secure patching
and cleared the FIRMWARE_MISSING flag. So this flag does not tell us
whether firmware memory was lost. But the driver could only be
downloading non-secure tunings, which is always safe to do.
If the driver has control of RESET we will have asserted it during
suspend so the firmware patch will have been lost. The driver would only
have control of RESET in non-secure mode.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/168122674550.26.8545058503709956172@mailman-core.alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The CS35L56 combines a high-performance mono audio amplifier, Class-H
tracking inductive boost converter, Halo Core(TM) DSP and a DC-DC boost
converter supporting Class-H tracking.
Supported control interfaces are I2C, SPI or SoundWire.
Supported audio interfaces are I2S/TDM or SoundWire.
Most chip functionality is controlled by on-board ROM firmware that is
always running. The driver must apply patch/tune to the firmware
before using the CS35L56.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230320112245.115720-9-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
