| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.17
There's a few new drivers here and quite a lot of cleanup work from
Morimoto-san but generally this has been quite a quiet release,
resulting in a fairly small diffstat. Highlights include:
- Refactoring of the Kconfig menus to be hopefully more consistant and
easier to navigate.
- Refactoring of the DAPM code, mainly hiding functionality that
doesn't need to be exposed to drivers.
- Removal of the unused upstream weak paths DAPM functionality.
- Further work on the generic handling for SoundWire SDCA devices.
- Cleanups of our usage of the PM autosuspend functions, this pulls in
some PM core changes on a shared tag.
- Support for AMD ACP7.2 and SoundWire on ACP 7.1, Fairphone 4 & 5,
various Intel systems, Qualcomm QCS8275, Richtek RTQ9124 and TI TAS5753.
|
|
Add TAS2770 support in TI's HDA driver. And add hda_chip_id for
more products. Distinguish DSP and non-DSP in firmware
loading function.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20250723142423.38768-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add a helper function that can be called from hw_params() in the DAI ops
to configure the SDCA Cluster, Clock and Usage controls. These setup the
channels, sample rate, and bit depths that will be used by the Terminal.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250707124155.2596744-8-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a helper function to extract the SoundWire hardware port number
from the SDCA DataPort Selector Control. Typically this would be
called from hw_params() and used to call sdw_stream_add_slave().
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250707124155.2596744-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently the core SDCA code simply creates a place holder available
channels from 1 to SDCA_MAX_CHANNEL_COUNT. Add a helper function
that will constrain the number of channels based on the actual
available SDCA Clusters in DisCo. Currently this code only handles
Input Terminal Entities as they directly specify the Cluster. More
work will be required later for Output Terminals which inherit their
Cluster. Typically this new helper would be called from the DAIs
startup callback.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250707124155.2596744-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a private data pointer that can be used to store context along
with the DAI. This will be useful to allow the SDCA class library to
store data separately from the CODEC driver itself.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250707124155.2596744-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The ASoC code for SDCA contains several helper functions that search for
controls/ranges/etc. As the code evolves these helpers are likely to be
useful to anything interacting with the stored DisCo data. Move the
helpers into sdca_function.c and export them so other modules can also
use them.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250707124155.2596744-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Peng Fan <peng.fan@nxp.com>:
This patchset is a pick up of patch 1,2 from [1]. And I also collect
Linus's R-b for patch 2. After this patchset, there is only one user of
of_gpio.h left in sound driver(pxa2xx-ac97).
of_gpio.h is deprecated, update the driver to use GPIO descriptors.
Patch 1 is to drop legacy platform data which in-tree no users are using it
Patch 2 is to convert to GPIO descriptors
Checking the DTS that use the device, all are using GPIOD_ACTIVE_LOW
polarity for reset-gpios, so all should work as expected with this patch.
[1] https://lore.kernel.org/all/20250408-asoc-gpio-v1-0-c0db9d3fd6e9@nxp.com/
|
|
There is no machine is using aic32x4_pdata as platform_data, so
remove the dead code.
Cc: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250710-asoc-gpio-1-v2-1-2233b272a1a6@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now that all patch_ops usage have been converted to the new
hda_codec_ops probe, we can drop patch_ops from the hda_codec,
together with the calls of patch_ops callbacks.
The hda_codec_ops.free callback is removed as all have been replaced
with the new remove callback.
Also, correct comments mentioning "patch"; it's replaced with "codec
driver".
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250709160434.1859-25-tiwai@suse.de
|
|
Until now, we use "patch_ops" embedded in hda_codec object for
defining the callbacks that are used in various places to manage
HD-audio codec. But from the device driver POV, this should have been
rather the driver ops, instead of the callbacks in the codec object.
This patch defines the driver ops for HD-audio codec driver as the
replacement. We reuse the same struct hda_codec_ops, and this is put
as hda_codec_driver.ops. When the driver->ops callbacks are defined,
they are called primarily instead of codec->patch_ops callbacks.
With converting to the driver ops, there is no need to pass the ugly
patch_ops handling in hda_device_id tables. That is, driver_data
field of hda_device_id becomes really optional and it can be used for
passing the codec-specific data (e.g. specifying a model).
The codec entries after the conversion should be with HDA_CODEC_ID()
and co, instead of the former HDA_CODEC_ENTRY().
Once after converting all codec drivers to use driver ops, we can get
rid of codec patch_ops.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250709160434.1859-10-tiwai@suse.de
|
|
The get_wcaps() and co are used not only by HD-audio core but also
other driver code, hence it'd be better to put into the common header
instead of local.h.
OTOH, there are macros of the same name like get_wcaps() that are
still used in sound/pci/hda/* locally, and those conflict with each
other. So we need to rename get_wcaps() (to be moved from hda-core)
with the proper snd_hdac prefix for avoiding name conflicts, and
define in the common hdaudio.h.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250709160434.1859-2-tiwai@suse.de
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
This is prepare to hiding snd_soc_dapm_context inside soc-dapm.c
|
|
soc_dapm_dev_attrs is global variable. Let's add snd_soc_ prefix.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87ikkchis6.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dapm_xxx_event() is global function. Let's add snd_soc_ prefix.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87jz4shisc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dapm_mark_endpoints_dirty() is global function. Let's add snd_soc_
prefix.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87ldp8hisj.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Because header defined randomly, it needs name definitions on top of
soc-dapm.h. it is not needed if definitions are implemented in correct
order.
This patch has big change from change-line point of view, but is
just reordering, nothing changed in meaning.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87plekhit0.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
No one is using snd_soc_dapm_weak_routes(), let's remove it.
Because snd_soc_dapm_weak_routes() was removed, path->weak is not
needed either. Remove it, too.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87sejghitd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_soc_dapm_nc_pin() was added in commit 5817b52a298a ("ALSA: ASoC: Allow
machine drivers to mark pins as not connected") at 2008.
It is identical to snd_soc_dapm_disable_pin[_unlocked](). It was expected
to be updated, but were enough as-is for this 17 years.
We might update these, but renaming function name by define is enough
for now. We can re-create these if needed in the future. Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87tt3whitj.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Add a maintainers entry for SDCA, do a couple of small fixups for
previous chains, and then adding the beginnings of the SDCA IRQ
handling. This is based around a regmap IRQ chip and a few helper
functions that can be called from the client drivers to setup the
IRQs.
|
|
Add basic IRQ handlers for the function status and jack detection
interrupts.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250624122844.2761627-8-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a library supporting usage of SDCA interrupts, using regmap irq
framework. The library adds functions for parsing ACPI for
interrupt-related information, configuring irq chip and requesting
individual irqs. Calling code (SDCA function code) is expected to also
substitute the library's base irq handler for its own, appropriate
callback.
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250624122844.2761627-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Zero is a valid SDCA IRQ interrupt position so add a special value to
indicate that the IRQ is not used.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250624122844.2761627-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make the names a slightly better match for the specification and add
some constants for the values rather than hard coding.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250624122844.2761627-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
The series adds support for combined speaker components with one "spk:"
tag in the card->components string. This is a UCM request.
|
|
Currently the sdw machine driver uses different way to get the
component name from the DAI name for different codecs in the rtd_init
callback. It means that we need to rely on the rtd_init callback to get
the component name. Add an optional component string to the
asoc_sdw_dai_info struct allows the machine driver to get the component
name directly.
The commit adds the component names for the AMP dais for the preparation
to set card->components string for combined speaker configs.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20250625140430.311865-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch supports to add a HID device for SDCA HIDE entity.
The codec driver could call 'hid_input_report' to report events.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250616114929.855496-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for parsing the HIDE entity descriptor and HID descriptor/report
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250616114820.855401-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The firmware will be able to only save and restore the context related to
library management.
This means that even without a full context save, the libraries do not
need to be re-loaded to the firmware after second or consecutive boots.
This is reported via the FW_READY notification, where BIT(15) indicates:
0 - the library restore is not done
1 - library restore is done
This bit is only valid if full context save is not enabled, full context
save is by definition saves and restores the library related book-keeping
as well.
Add a new flag to tell the platform code if the libraries have been
restored, no need to reload them after boot.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20250619105623.4546-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently only left and right channels are supported for each amp.
Support is needed for a center channel, using both left and right
channel audio.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://patch.msgid.link/20250612160029.848104-2-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Move the include linux/debugfs.h into tas2781.h for code clean.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250612044252.1025-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
No one is using component->id.
One idea is we can re-use it as serial number for component.
But we have no usage, so far. Let's just remove it for now.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/877c1suuna.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.16-rc1.
Included in here are the following:
- USB offload support for audio devices.
I think this takes the record for the most number of patch series
(30+) over the longest period of time (2+ years) to get merged
properly.
Many props go to Wesley Cheng for seeing this effort through, they
took a major out-of-tree hacked-up-monstrosity that was created by
multiple vendors for their specific devices, got it all merged into
a semi-coherent set of changes, and got all of the different major
subsystems to agree on how this should be implemented both with
changes to their code as well as userspace apis, AND wrangled the
hardware companies into agreeing to go forward with this, despite
making them all redo work they had already done in their private
device trees.
This feature offers major power savings on embedded devices where a
USB audio stream can continue to flow while the rest of the system
is sleeping, something that devices running on battery power really
care about. There are still some more small tweaks left to be done
here, and those patches are still out for review and arguing among
the different hardware companies, but this is a major step forward
and a great example of how to do upstream development well.
- small number of thunderbolt fixes and updates, things seem to be
slowing down here (famous last words...)
- xhci refactors and reworking to try to handle some rough corner
cases in some hardware implementations where things don't always
work properly
- typec driver updates
- USB3 power management reworking and updates
- Removal of some old and orphaned UDC gadget drivers that had not
been used in a very long time, dropping over 11 thousand lines from
the tree, always a nice thing, making up for the 12k lines added
for the USB offload feature.
- lots of little updates and fixes in different drivers
All of these have been in linux-next for over 2 weeks, the USB offload
logic has been in there for 8 weeks now, with no reported issues"
* tag 'usb-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
ALSA: usb-audio: qcom: fix USB_XHCI dependency
ASoC: qdsp6: fix compile-testing without CONFIG_OF
usb: misc: onboard_usb_dev: fix build warning for CONFIG_USB_ONBOARD_DEV_USB5744=n
usb: typec: tipd: fix typo in TPS_STATUS_HIGH_VOLAGE_WARNING macro
USB: typec: fix const issue in typec_match()
USB: gadget: udc: fix const issue in gadget_match_driver()
USB: gadget: fix up const issue with struct usb_function_instance
USB: serial: pl2303: add new chip PL2303GC-Q20 and PL2303GT-2AB
USB: serial: bus: fix const issue in usb_serial_device_match()
usb: usbtmc: Fix timeout value in get_stb
usb: usbtmc: Fix read_stb function and get_stb ioctl
ALSA: qc_audio_offload: try to reduce address space confusion
ALSA: qc_audio_offload: avoid leaking xfer_buf allocation
ALSA: qc_audio_offload: rename dma/iova/va/cpu/phys variables
ALSA: usb-audio: qcom: Fix an error handling path in qc_usb_audio_probe()
usb: misc: onboard_usb_dev: Fix usb5744 initialization sequence
dt-bindings: usb: ti,usb8041: Add binding for TI USB8044 hub controller
usb: misc: onboard_usb_dev: Add support for TI TUSB8044 hub
usb: gadget: lpc32xx_udc: Use USB API functions rather than constants
usb: gadget: epautoconf: Use USB API functions rather than constants
...
|
|
Sync with the pending 6.15 fixes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.16
The changes in this release are quite large, mainly in drivers rather
than the core. This is partly due to cleanups that touch a lot of
drivers and partly due to several relatively large new drivers.
- Support for automatically enumerating DAIs from standards conforming
SoundWire SDCA devices, further work is required for these to be
useful in an actual card.
- Conversion of quite a few drivers to newer GPIO APIs.
- More helpers and cleanups from Mormimoto-san.
- Support for a wider range of AVS platforms.
- Support for AMD ACP 7.x platforms, Cirrus Logic CS35L63 and CS48L32,
Everest Semiconductor ES8389, Longsoon-1 AC'97 controllers, nVidia
Tegra264, Richtek ALC203 and RT9123 and Rockchip SAI controllers.
|
|
In commit d69d80484598 ("driver core: have match() callback in struct
bus_type take a const *"), the match bus callback was changed to have
the driver be a const pointer. Unfortunately that const attribute was
thrown away when container_of() is called, which is not correct and was
not caught by the compiler due to how container_of() is implemented.
Fix this up by correctly preserving the const attribute of the driver
passed to the bus match function which requires the hdac_driver match
function to also take a const pointer for the driver structure.
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Fixes: d69d80484598 ("driver core: have match() callback in struct bus_type take a const *")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2025052204-hyphen-thermal-3e72@gregkh
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
SPI and I2C into the tas2781_hda lib
Calibration data getting function for SPI and I2C HDA drivers are almost
same, which read the calibration data from UEFI. To put them into
tas2781_hda lib for code cleanup is more reasonable than to still keep
them in the codec driver. For tas2781 codec driver, there're two different
sources for calibrated data, one is from bin file, generated in factory
test, requested and read in codec driver side; the other is from user
space during device bootup.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250522014347.1163-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Add helper functions to add DAPM widgets, routes, ALSA controls,
and DAI drivers, these will be used to create SDCA function device
drivers.
This series should provide most of the core functionality needed to
get a device registered and have a working DAPM graph within the
device. There are some features that still need additional work, these
are marked with FIXMEs in the code. The two main things are SDCA
Clock Muxes (not used in our devices and needs some ASoC core work),
and better support for more complex SDCA volume control definitions
(our parts have fairly simple volumes, and SDCA has a large amount of
flexibility in how the volume control is specified).
The next steps in the process are to add helpers for the DAI ops
themselves, some IRQ handling, and firmware download. And finally we
should be able to actually add the SDCA class driver itself.
|
|
Use the previously parsed DisCo information from ACPI to create the DAI
drivers required to connect an SDCA Function into an ASoC soundcard.
Create DAI driver structures and populate the supported sample rates
and sample widths into them based on the Input/Output Terminal and any
attach Clock Source entities. More complex relationships with channels
etc. will be added later as constraints as part of the DAI startup.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-8-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the previously parsed DisCo information from ACPI to create the
ALSA controls required by an SDCA Function. This maps all User and
Application level SDCA Controls to ALSA controls. Typically controls
marked with those access levels are just volumes and mutes.
SDCA defines volume controls as an integer in 1/256ths of a dB and
then provides a mechanism to specify what values are valid (range
templates). Currently only a simple case of a single linear volume
range with a power of 2 step size is supported. This allows the code
to expose the volume control using a simple shift. This will need
expanded in the future, to support more complex ranges and probably
also some additional control types but this should be sufficient to
for a first pass.
For non-dataport terminal widgets also add a pin switch to allow
that endpoint to be turned on/off.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the previously parsed DisCo information from ACPI to create DAPM
widgets and routes representing a SDCA Function. For the most part SDCA
maps well to the DAPM abstractions.
The primary point of interest is the SDCA Power Domain Entities
(PDEs), which actually control the power status of the device. Whilst
these PDEs are the primary widgets the other parts of the SDCA graph
are added to maintain a consistency with the hardware abstract,
and allow routing to take effect. As for the PDEs themselves the
code currently only handle PS0 and PS3 (basically on and off),
the two intermediate power states are not commonly used and don't
map well to ASoC/DAPM.
Other minor points of slightly complexity include, the Group Entities
(GEs) these set the value of several other controls, typically
Selector Units (SUs) for enabling a cetain jack configuration. Multiple
SUs being controlled by a GE are easily modelled creating a single
control and sharing it among the controlled muxes.
SDCA also has a slight habit of having fully connected paths, relying
more on activating the PDEs to enable functionality. This doesn't
map quite so perfectly to DAPM which considers the path a reason to
power the PDE. Whilst in the current specification Mixer Units are
defined as fixed-function, in DAPM we create a virtual control for
each input (which defaults to connected). This allows paths to be
connected/disconnected, providing a more ASoC style approach to
managing the power. PIN_SWITCHs will also be added for non-dataport
terminal entities in a later patch along with the other ALSA controls,
providing greater flexibility in power management.
A top level helper sdca_asoc_populate_component() is exported that
counts and allocates everything, however, the intermediate counting and
population functions are also exported. This will allow end drivers to
do allocation and add custom handling, which is probably fairly likely
for the early SDCA devices.
Clock muxes are currently not fully supported, so some future work will
also be required there.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The core currently supports pin switches for source/sink widgets, but
only at the card level. SDCA components specify the fabric at the
level of the individual components, to support this add helpers to
allow component level pin switches.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix minor typo SDAC -> SDCA.
Fixes: 42b144cb6a2d ("ASoC: SDCA: Add SDCA Control parsing")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>:
This patchset adds support for sound card on Qualcomm QCS9100 and
QCS9075 boards.
|
|
Drop the I2C in one comment, for these registers are also used in SPI
driver; Move the macro definition of TASDEVICE_CMD_XXX from tas2781.h to
tas2781_fmwlib.c, because the macros are only referenced in only fwlib.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250518132451.707-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The PCM OSS layer tries to clear the buffer with the silence data at
initialization (or reconfiguration) of a stream with the explicit call
of snd_pcm_format_set_silence() with runtime->dma_area. But this may
lead to a UAF because the accessed runtime->dma_area might be freed
concurrently, as it's performed outside the PCM ops.
For avoiding it, move the code into the PCM core and perform it inside
the buffer access lock, so that it won't be changed during the
operation.
Reported-by: syzbot+32d4647f551007595173@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/68164d8e.050a0220.11da1b.0019.GAE@google.com
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250516080817.20068-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Back-merge of 6.15 devel branch for further development of HD-audio
stuff.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Merge series from Simon Trimmer <simont@opensource.cirrus.com>:
These two patches introduce a log message when provisioning the cs35l56
family of devices that uniquely identifies the firmware tuning.
|
|
The cs35l56 smart amplifier has some informational firmware controls
that are populated by a tuning bin file to unique values - logging these
during firmware load identifies the specific configuration being used on
that device instance.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/47762a5f1ce2b178ad863c6698296aea09b72e10.1747142267.git.simont@opensource.cirrus.com
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
