| Age | Commit message (Collapse) | Author |
|---|
|
There is a missing call to of_node_put() if devm_kcalloc() fails.
Fix this by changing the code to use cleanup.h magic to drop the
refcount.
Fixes: 6b0cd72757c6 ("regulator: max20086: fix invalid memory access")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aDVRLqgJWMxYU03G@stanley.mountain
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This is a very quiet release, there was no work on the core and a good
chunk of the updates were the result of conversions to use newer GPIO
APIs.
We did gain support for Analog ADP5055 and TI TPS65214 devices, and
there's a new restart handler for the PCA9450 which allows devices
using it to be properly power cycled on reboot, but otherwise it's
minor fixes and API updates"
* tag 'regulator-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (24 commits)
regulator: qcom_spmi: Constify struct spmi_voltage_range
regulator: max8952: Correct Samsung "Electronics" spelling in copyright headers
regulator: dt-bindings: mt6357: Drop fixed compatible requirement
regulator: gpio: Use dev_err_probe
regulator: pca9450: Add restart handler
regulator: da9121: Fix Wvoid-pointer-to-enum-cast warning
regulator: tps65219: Add TI TPS65214 Regulator Support
regulator: tps65219: Add support for TPS65215 Regulator IRQs
regulator: tps65219: Add support for TPS65215 regulator resources
regulator: tps65219: Update struct names
regulator: pf9453: convert to use maple tree register cache
regulator: max20086: Change enable gpio to optional
regulator: max20086: Fix MAX200086 chip id
regulator: adp5055: Remove unneeded semicolon
regulator: adp5055: remove duplicate device table
regulator: adp5055: Add driver for adp5055
regulator: dt-bindings: adi,adp5055-regulator: Add adp5055 support
regulator: don't compare raw GPIO descriptor pointers
regulator: rpi-panel-attiny: use new GPIO line value setter callbacks
regulator: rpi-panel-attiny: use lock guards for the state mutex
...
|
|
max20086_parse_regulators_dt() calls of_regulator_match() using an
array of struct of_regulator_match allocated on the stack for the
matches argument.
of_regulator_match() calls devm_of_regulator_put_matches(), which calls
devres_alloc() to allocate a struct devm_of_regulator_matches which will
be de-allocated using devm_of_regulator_put_matches().
struct devm_of_regulator_matches is populated with the stack allocated
matches array.
If the device fails to probe, devm_of_regulator_put_matches() will be
called and will try to call of_node_put() on that stack pointer,
generating the following dmesg entries:
max20086 6-0028: Failed to read DEVICE_ID reg: -121
kobject: '\xc0$\xa5\x03' (000000002cebcb7a): is not initialized, yet
kobject_put() is being called.
Followed by a stack trace matching the call flow described above.
Switch to allocating the matches array using devm_kcalloc() to
avoid accessing the stack pointer long after it's out of scope.
This also has the advantage of allowing multiple max20086 to probe
without overriding the data stored inside the global of_regulator_match.
Fixes: bfff546aae50 ("regulator: Add MAX20086-MAX20089 driver")
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Link: https://patch.msgid.link/20250508064947.2567255-1-demonsingur@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The enable pin can be configured as always enabled by the hardware. Make
the enable gpio request optional so the driver doesn't fail to probe
when `enable-gpios` property is not present in the device tree.
Cc: stable@vger.kernel.org
Fixes: bfff546aae50 ("regulator: Add MAX20086-MAX20089 driver")
Signed-off-by: João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com>
Link: https://patch.msgid.link/20250420-fix-max20086-v1-2-8cc9ee0d5a08@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
>From MAX20086-MAX20089 datasheet, the id for a MAX20086 is 0x30 and not
0x40. With the current code, the driver will fail on probe when the
driver tries to identify the chip id from a MAX20086 device over I2C.
Cc: stable@vger.kernel.org
Fixes: bfff546aae50 ("regulator: Add MAX20086-MAX20089 driver")
Signed-off-by: João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com>
Link: https://patch.msgid.link/20250420-fix-max20086-v1-1-8cc9ee0d5a08@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make similar OF and ID table to extend support for ID match using
i2c_match_data(). Currently it works only for OF match tables as the
driver_data is wrong for ID match.
While at it, drop blank lines before MODULE_DEVICE_TABLE* and remove
trailing comma in the terminator entry for OF/ID table.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230903154257.70800-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The max20086 regulator driver includes the legacy header
<linux/gpio.h> for no reason, it is already using the proper
<linux/gpio/consumer.h> include. Drop the include.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230808-descriptors-regulator-v1-8-939b5e84dd18@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de
Link: https://lore.kernel.org/r/20230505220218.1239542-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org
|
|
This follows on the change ("regulator: Set PROBE_PREFER_ASYNCHRONOUS
for drivers that existed in 4.14") but changes regulators didn't exist
in Linux 5.15 but did exist in Linux 6.1.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230316125351.6.Ibc8a86ddd5055ebbbe487a529199db7b36ccad1a@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The driver can be compile tested with !CONFIG_OF making certain data
unused:
drivers/regulator/max20086-regulator.c:289:34: error: ‘max20086_dt_ids’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20230310214553.275450-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
max20086-regulator.c needs <linux/gpio/consumer.h> for an enum, some
macros, and a function prototype. (seen on ARCH=m68k)
Adding this header file fixes multiple build errors:
../drivers/regulator/max20086-regulator.c: In function 'max20086_i2c_probe':
../drivers/regulator/max20086-regulator.c:217:26: error: storage size of 'flags' isn't known
217 | enum gpiod_flags flags;
../drivers/regulator/max20086-regulator.c:261:27: error: 'GPIOD_OUT_HIGH' undeclared (first use in this function); did you mean 'GPIOF_INIT_HIGH'?
261 | flags = boot_on ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
| ^~~~~~~~~~~~~~
../drivers/regulator/max20086-regulator.c:261:44: error: 'GPIOD_OUT_LOW' undeclared (first use in this function); did you mean 'GPIOF_INIT_LOW'?
261 | flags = boot_on ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
../drivers/regulator/max20086-regulator.c:262:27: error: implicit declaration of function 'devm_gpiod_get'; did you mean 'devm_gpio_free'? [-Werror=implicit-function-declaration]
262 | chip->ena_gpiod = devm_gpiod_get(chip->dev, "enable", flags);
../drivers/regulator/max20086-regulator.c:217:26: warning: unused variable 'flags' [-Wunused-variable]
217 | enum gpiod_flags flags;
Fixes: bfff546aae50 ("regulator: Add MAX20086-MAX20089 driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Watson Chow <watson.chow@avnet.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20220115033603.24473-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This code accidentally returns PTR_ERR(NULL) which is success. It
should return a negative error code.
Fixes: bfff546aae50 ("regulator: Add MAX20086-MAX20089 driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20220111072657.GK11243@kili
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The MAX20086-MAX20089 are dual/quad power protectors for cameras. Add a
driver that supports controlling the outputs individually. Additional
features, such as overcurrent detection, may be added later if needed.
Signed-off-by: Watson Chow <watson.chow@avnet.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20220106224350.16957-3-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
