| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"This round of updates contains a fair amount of new device support, a
couple of fixes and some refactoring. The most notable additions
include new drivers for Loongson's Security Engine, RNG and TPM, new
drivers for TI's TPS6594 Power Button and BQ257xx Charger ICs.
The rest of the set provides a return value check fix and a
refactoring to use a more modern GPIO API for the VEXPRESS sysreg
driver, the removal of a deprecated IRQ ACK function from the MC13xxx
RTC driver and a new DT binding for the aforementioned TI BQ257xx
charger.
New Support & Features:
- Add a suite of drivers for the Loongson Security Engine, including
the core controller, a Random Number Generator (RNG) and Trusted
Platform Module (TPM) support.
- Introduce support for the TI TPS6594 PMIC's power button, including
the input driver, MFD cell registration, and a system power-off
handler.
- Add comprehensive support for the TI BQ257xx series of charger ICs,
including the core MFD driver and a power supply driver for the
charger functionality.
Improvements & Fixes:
- Check the return value of devm_gpiochip_add_data() in the VEXPRESS
sysreg driver to prevent potential silent failures.
Cleanups & Refactoring:
- Add a MAINTAINERS entry for the new Loongson Security Engine
drivers.
- Convert the VEXPRESS sysreg driver to use the modern generic GPIO
chip API.
Removals:
- Remove the deprecated and unused mc13xxx_irq_ack() function from
the MC13xxx RTC, input and touchscreen drivers.
Device Tree Bindings Updates:
- Add device tree bindings for the TI BQ25703A charger"
* tag 'mfd-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits)
mfd: simple-mfd-i2c: Add compatible string for LX2160ARDB
mfd: simple-mfd-i2c: Keep compatible strings in alphabetical order
dt-bindings: mfd: twl: Add missing sub-nodes for TWL4030 & TWL603x
dt-bindings: watchdog: Add SMARC-sAM67 support
dt-bindings: mfd: tps6594: Allow gpio-line-names
mfd: intel-lpss: Add Intel Wildcat Lake LPSS PCI IDs
mfd: 88pm886: Add GPADC cell
mfd: vexpress-sysreg: Use more common syntax for compound literals
mfd: rz-mtu3: Fix MTU5 NFCR register offset
mfd: max77705: Setup the core driver as an interrupt controller
mfd: cs42l43: Remove IRQ masking in suspend
mfd: cs42l43: Move IRQ enable/disable to encompass force suspend
mfd: ls2kbmc: Add Loongson-2K BMC reset function support
mfd: ls2kbmc: Introduce Loongson-2K BMC core driver
mfd: bd71828, bd71815: Prepare for power-supply support
dt-bindings: mfd: aspeed: Add AST2700 SCU compatibles
dt-bindings: mfd: Convert aspeed,ast2400-p2a-ctrl to DT schema
dt-bindings: mfd: fsl,mc13xxx: Add buttons node
dt-bindings: mfd: fsl,mc13xxx: Convert txt to DT schema
mfd: macsmc: Add "apple,t8103-smc" compatible
...
|
|
The current entry for the MAX77838 regulator is unselectable (as it
depended on a non-user-selectable config - REGMAP_I2C). Fix this by
making it select the config, and not depending on it.
Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Link: https://patch.msgid.link/20250917-maxreg-kconfig-fix-v1-1-1369f88d6272@mentallysanemainliners.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for the regulators found in the SpacemiT P1 PMIC. This
PMIC provides 6 buck converters and 12 LDO regulators.
The PMIC is implemented as a multi-function device. These regulators
are probed based on this driver being named in a MFD cell in the simple
MFD I2C driver.
Signed-off-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20250825172057.163883-4-elder@riscstar.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>:
This patchset adds support for the max77838 PMIC. It's used on the Galaxy
S7 lineup of phones, and provides regulators for the display.
|
|
The max77838 PMIC contains a BUCK regulator and 4 LDOs. It's primarily
used in the Samsung Galaxy S7 lineup and is accessed over I2C.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://patch.msgid.link/20250914130230.2622030-3-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for the boost regulator found in the Texas Instruments
BQ25703. The boost regulator is capable of outputting between 4.48
and 20.8 volts and between 0 and 6.35 amps.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250904160530.66178-5-macroalpha82@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Attach the power good gpio to the regulator device devres instead of the
parent device to fix problems if probe is run multiple times
(rmmod/insmod or some deferral).
Fixes: 8c485bedfb785 ("regulator: sy7636a: Initial commit")
Signed-off-by: Andreas Kemnade <akemnade@kernel.org>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Message-ID: <20250906-sy7636-rsrc-v1-2-e2886a9763a7@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Woodrow Douglass <wdouglass@carnegierobotics.com>:
I wrote this driver to read settings and state from the nxp pf530x
regulator. Please consider it for inclusion, any criticism is welcome.
|
|
This driver allows reading some regulator settings and adjusting
output voltage. It is based on information from the datasheet
at https://www.nxp.com/docs/en/data-sheet/PF5300.pdf
Signed-off-by: Woodrow Douglass <wdouglass@carnegierobotics.com>
Message-ID: <20250902-pf530x-v7-2-10eb2542f944@carnegierobotics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Change the 'ret' variable from u32 to int to store negative error codes or
zero returned by of_property_read_u32().
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but it's ugly as pants. Additionally, assigning negative error
codes to unsigned type may trigger a GCC warning when the -Wsign-conversion
flag is enabled.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Fixes: 0fbeae70ee7c ("regulator: add SCMI driver")
Link: https://patch.msgid.link/20250829101411.625214-1-rongqianfeng@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Message-ID: <20250828122737.43488-1-liaoyuanhong@vivo.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In the current design, the `pm8008_regulator_get_voltage_sel()` callback
can return a negative value if the raw voltage value is read as 0 uV from
the PMIC HW register. This can cause the probe to fail when the
`machine_constraints_voltage()` check is called during the regulator
registration flow.
Fix this by using the helper `regulator_map_voltage_linear_range()` to
convert the raw value to a voltage selector inside the mentioned get
voltage selector function. This ensures that the value returned is always
within the defined range.
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Message-ID: <20250823-pm8008-negitive-selector-v1-1-52b026a4b5e8@quicinc.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The "priv->cdata" pointer isn't an error pointer; this should be a NULL
check instead. Otherwise it leads to a NULL pointer dereference in the
caller, rt5133_probe().
Fixes: 714165e1c4b0 ("regulator: rt5133: Add RT5133 PMIC regulator Support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aKMc1oK-7yY4cD3K@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is a copy and paste error and we accidentally use "PTR_ERR(rdev)"
instead of "error". The "rdev" pointer is valid at this point.
Also there is no need to print the error code in the error message
because dev_err_probe() already prints that. So clean up the error
message a bit.
Fixes: 38c9f98db20a ("regulator: tps65219: Add support for TPS65215 Regulator IRQs")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aKRGmVdbvT1HBvm8@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace calls of 'devm_kzalloc(dev, count * sizeof([type]), flags)'
with 'devm_kcalloc(dev, count, sizeof([type]), flags)' in
setup_feedback_loop() for safer memory allocation with built-in
overflow protection.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/20250817142327.174531-1-rongqianfeng@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
With module test, there is error dump:
------------[ cut here ]------------
notifier callback pca9450_i2c_restart_handler already registered
WARNING: kernel/notifier.c:23 at notifier_chain_register+0x5c/0x88,
CPU#0: kworker/u16:3/50
Call trace:
notifier_chain_register+0x5c/0x88 (P)
atomic_notifier_chain_register+0x30/0x58
register_restart_handler+0x1c/0x28
pca9450_i2c_probe+0x418/0x538
i2c_device_probe+0x220/0x3d0
really_probe+0x114/0x410
__driver_probe_device+0xa0/0x150
driver_probe_device+0x40/0x114
__device_attach_driver+0xd4/0x12c
So use devm_register_sys_off_handler to let kernel handle the resource
free to avoid kernel dump.
Fixes: 6157e62b07d9 ("regulator: pca9450: Add restart handler")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250815-pca9450-v1-1-7748e362dc97@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20250814073326.17644-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When using MMIO with regmap, fast_io is implied. No need to set it
again.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20250813161517.4746-16-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
RT5133 is a highly-integrated chip. It includes 8 LDOs and 3 GPOs that can
be used to drive output high/low purpose. The dependency of the GPO block is
internally LDO1 Voltage.
Signed-off-by: Jeff Chang <jeff_chang@richtek.com>
Link: https://patch.msgid.link/20250813020910.2977555-2-jeff_chang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Joy Zou <joy.zou@nxp.com>:
Add binding document and driver.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
---
Changes in v3:
binding part
- change regulator node names into lowercase.
- add more description for nxp,i2c-crc-enable.
- remove the unnecessary nxp,dvs-run/standby-voltage property.
These changes come from review comments:
https://lore.kernel.org/imx/e9f38e38-7df7-4d19-b5c0-2f18aeebcc78@kernel.org/
- add regulator-state-mem property for example.
driver part
- convert to use maple tree register cache.
- change of_match_ptr() name to lowercase since dt-binding changed.
- add more nxp,i2c-crc-enable description for commit message.
- remove the of_parse_cb and dvs from pf0900_regulators since the
unnecessary property nxp,dvs-run/standby-voltage removed.
- add set_suspend_enable/disable/voltage for the SW regulator_ops.
the run/standby voltage can be adjusted via the API which regulator
driver provides is recommended.
These changes come from binding review comments:
https://lore.kernel.org/imx/e9f38e38-7df7-4d19-b5c0-2f18aeebcc78@kernel.org/
- add bitfield.h header due to build issue.
- correct the sw4 id.
- add PF0900 prefix for short macro define in order to avoid duplication.
- merge the same mask define in order to simplify code.
- Link to v2: https://lore.kernel.org/r/20250721-b4-pf09-v2-v2-0-e2c568548032@nxp.com
Changes in v2:
binding part
- modify the binding file name to match compatible string.
- add one space for dt_binding_check warning.
- remove unnecessary quotes from "VAON".
- remove the unnecessary empty line.
- move unevaluatedProperties after the $ref.
- move additionalProperties after regulator type.
- remove unnecessary regulator description
driver part
- modify the copyright comment block to C++ style.
- add reg_read/write for regmap_bus.
- remove original pf0900_pmic_read/write.
- remove many regulator operations.
- use regmap_read replace pf0900_pmic_read.
- use regmap_update_bits and regmap_write_bits replace pf0900_pmic_write.
- move the code from pf0900.h to pf0900-regulator.c and delete the header file.
- remove unmask status interrupts and add unmask regulator interrupts.
- remove many interrupts check warning print from irq_handler.
- add notifier for regulator event.
- remove unused macro define.
- add PF0900 prefix for IRQ macro define in order to avoid duplication.
- use GENMASK() and BIT() to replace mask marco define
- remove redundant enum pf0900_chip_type.
- remove redundant print info and comments.
- add dvs property present check because this property is optional.
- remove ret == -EINVAL check from sw_set_dvs() function.
- Link to v1: https://lore.kernel.org/imx/20250617102025.3455544-1-joy.zou@nxp.com/
---
Joy Zou (2):
dt-bindings: regulator: add PF0900 regulator yaml
regulator: pf0900: Add PMIC PF0900 support
.../devicetree/bindings/regulator/nxp,pf0900.yaml | 163 ++++
drivers/regulator/Kconfig | 8 +
drivers/regulator/Makefile | 1 +
drivers/regulator/pf0900-regulator.c | 975 +++++++++++++++++++++
4 files changed, 1147 insertions(+)
---
base-commit: 84b92a499e7eca54ba1df6f6c6e01766025943f1
change-id: 20250714-b4-pf09-v2-91cdee6d1272
Best regards,
--
Joy Zou <joy.zou@nxp.com>
|
|
S2DOS05 has 1 buck and 4 LDO regulators, used for powering
panel/touchscreen.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://patch.msgid.link/20250805-starqltechn_integration_upstream-v8-1-09d8a321fafe@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
devm_kzalloc() has already been initialized to full 0 space, there is no
need to use memset() to initialize again.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Link: https://patch.msgid.link/20250807123949.495193-1-liaoyuanhong@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20250729040044.1851988-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The PF0900 is a power management integrated circuit (PMIC) optimized
for high performance i.MX9x based applications. It features five high
efficiency buck converters, three linear and one vaon regulators. It
provides low quiescent current in Standby and low power off Modes.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507221720.jxsGRfcE-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202506181134.0Hkvy7CK-lkp@intel.com/
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Link: https://patch.msgid.link/20250731-b4-pf09-v2-v3-2-4c2659516582@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"This fixes an issue with the newly added code for handling large
voltage changes on regulators which require that individual voltage
changes cover a limited range, the check for convergence was broken"
* tag 'regulator-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: correct convergence check in regulator_set_voltage()
|
|
The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- battery-info: replace any DT specific bits with fwnode usage
- replace any device-tree code with generic fwnode based handling
Power-supply drivers:
- ug3105_battery: use battery-info API
- qcom_battmgr: report capacity
- qcom_battmgr: support LiPo battery reporting
- add missing missing power-supply ref to a bunch of DT bindings
- update drivers regarding pm_runtime_autosuspend() usage
- misc minor fixes and cleanups
Reset drivers:
- misc minor cleanups"
* tag 'for-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (32 commits)
power: supply: core: fix static checker warning
power: supply: twl4030_charger: Remove redundant pm_runtime_mark_last_busy() calls
power: supply: bq24190: Remove redundant pm_runtime_mark_last_busy() calls
MAINTAINERS: rectify file entry in QUALCOMM SMB CHARGER DRIVER
power: supply: max1720x correct capacity computation
MAINTAINERS: add myself as smbx charger driver maintainer
power: supply: pmi8998_charger: rename to qcom_smbx
power: supply: qcom_pmi8998_charger: fix wakeirq
power: supply: max14577: Handle NULL pdata when CONFIG_OF is not set
power: return the correct error code
power: reset: POWER_RESET_TORADEX_EC should depend on ARCH_MXC
power: supply: cpcap-charger: Fix null check for power_supply_get_by_name
power: supply: bq25980_charger: Constify reg_default array
power: supply: bq256xx_charger: Constify reg_default array
power: reset: at91-sama5d2_shdwc: Refactor wake-up source logging to use dev_info
power: reset: qcom-pon: Rename variables to use generic naming
power: supply: qcom_battmgr: Add lithium-polymer entry
power: supply: qcom_battmgr: Report battery capacity
power: supply: bq24190: Free battery_info
power: supply: ug3105_battery: Switch to power_supply_batinfo_ocv2cap()
...
|
|
The logic in regulator_set_voltage() which checks for a non-convergence
condition on a stepped regulator is flawed.
regulator_set_voltage() checks if the error in target voltage has increased
or decreased, and returns -EWOULDBLOCK if the error has not decreased
enough. The correct non-convergence condition is:
new_delta - delta > -rdev->constraints->max_uV_step
or equivalently:
delta - new_delta < rdev->constraints->max_uV_step
But the currently used condition is:
new_delta - delta > rdev->constraints->max_uV_step
Which may cause an infinite loop if the voltage error doesn't converge.
Fix this by correcting the convergence condition.
Suggested-by: Jon Hunter <jonathanh@nvidia.com>
Fixes: d511206dc7443 ("regulator: core: repeat voltage setting request for stepped regulators")
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Link: https://patch.msgid.link/20250729-b4-regulator-stepping-fix-v1-1-3f7b8c55d7d7@bootlin.com
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function name mt6370_regualtor_register contains a spelling mistake,
fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20250724114832.146718-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is a spelling mistake in the REGULATOR_RT4803 config. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20250724113113.143009-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The regulator_set_voltage() function may exhibit unexpected behavior if the
target regulator has a maximum voltage step constraint. With such a
constraint, the regulator core may clamp the requested voltage to a lesser
value, to ensure that the voltage delta stays under the specified limit.
This means that the resulting regulator voltage depends on the current
voltage, as well as the requested range, which invalidates the assumption
that a repeated request for a specific voltage range will amount to a noop.
Considering the case of a regulator with a maximum voltage step constraint
of 1V:
initial voltage: 2.5V
consumer requests 4V
expected result: 3.5V
resulting voltage: 3.5V
consumer requests 4V again
expected result: 4V
actual result: 3.5V
Correct this by repeating attempts to balance the regulator voltage until
the result converges.
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Link: https://patch.msgid.link/20250718-regulator-stepping-v2-1-e28c9ac5d54a@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
1. remove unintentional GPL change
2. using switch case for Device ID probe check.
Signed-off-by: Jeff Chang <jeff_chang@richtek.com>
Link: https://patch.msgid.link/20250716021230.2660564-1-jeff_chang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The volatile_reg function is named as tps6287x_volatile_reg by mistake
when enabing the REGCACHE_MAPLE support.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20250714010456.4906-1-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Luca Weiss <luca.weiss@fairphone.com>:
Document and add support for the regulators on PM7550 and PMR735B, which
can be paired with the Milos SoC.
|
|
Add RPMH regulators exposed by Qualcomm Technologies, Inc. PM7550 PMIC.
It has 6 FTS525 (FT-SMPS) and 23 LDOs with 3 different types.
L1-L11 are LDO515 LV NMOS, L12-L13 are LDO515 MV PMOS, L14-L23 are
LDO512 MV PMOS.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://patch.msgid.link/20250711-pm7550-pmr735b-rpmh-regs-v2-4-bca8cc15c199@fairphone.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add RPMH regulators exposed by Qualcomm Technologies, Inc. PMR735B PMIC.
It has 12 LDOs with 2 different types, L4 & L10 are LDO512 LV PMOS
and the rest are LDO512 NMOS.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://patch.msgid.link/20250711-pm7550-pmr735b-rpmh-regs-v2-3-bca8cc15c199@fairphone.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The TI TPS652G1 is a stripped down version of the TPS65224 PMIC. It
doesn't feature the multiphase buck converter nor any voltage
monitoring. Due to the latter there are no interrupts serviced. In case
of the TPS652G1 any interrupt related setup is just skipped.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250703113153.2447110-9-mwalle@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Instead of using conditionals or tri state operators throughout the
.probe() provide a description per variant. This will make it much
easier to add new variants later.
While at it, make the variable naming more consistent.
This patch is only compile-time tested.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250703113153.2447110-8-mwalle@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit 00c826525fba ("regulator: tps6594-regulator: Add TI TPS65224 PMIC
regulators") added support for the TPS65224 and made the description of
the multi-phase buck converter variable depending on the variant of the
PMIC. But this was just done for MUTLI_BUCK12 and MULTI_BUCK12_34
configs probably because this variant only supports a multi-phase
configuration on buck 1 and 2. Remove the hardcoded value for the
remaining two configs, too as future PMIC variants might also support
these.
This is a preparation patch to refactor the regulator description and
is compile-time only tested.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250703113153.2447110-7-mwalle@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In .probe() interrupt_count and nr_types is essentially the same. It
contains the number of different interrupt per LDO or buck converter.
Drop one. This is a preparation patch to further simplify the handling
of different variants of this PMIC.
This patch is only compile-time tested.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250703113153.2447110-6-mwalle@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On some platforms, the sy8827n enable gpio may also be used for other
purpose, so make it NONEXCLUSIVE to support this case.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20250629095716.841-1-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Runtime PM updates related to autosuspend for 6.17
Make several autosuspend functions mark last busy stamp and update
the documentation accordingly (Sakari Ailus).
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Merge series from Sakari Ailus <sakari.ailus@linux.intel.com>:
Late last year I posted a set to switch to __pm_runtime_mark_last_busy()
and gradually get rid of explicit pm_runtime_mark_last_busy() calls in
drivers, embedding them in the appropriate pm_runtime_*autosuspend*()
calls. The overall feedback I got at the time was that this is an
unnecessary intermediate step, and removing the
pm_runtime_mark_last_busy() calls can be done after adding them to the
relevant Runtime PM autosuspend related functions. The latter part has
been done and is present in Rafael's tree at the moment, also see
<URL:https://lore.kernel.org/linux-pm/CAJZ5v0g7-8UWp6ATOy+=oGdxDaCnfKHBG_+kbiTr+
+VeuXZsUFQ@mail.gmail.com/>:
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git \
pm-runtime-6.17-rc1
|
|
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20250704075444.3221445-1-sakari.ailus@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
drvdata::gpiods is supposed to hold an array of 'gpio_desc' pointers. But
the memory is allocated for only one pointer. This will lead to
out-of-bounds access later in the code if 'config::ngpios' is > 1. So
fix the code to allocate enough memory to hold 'config::ngpios' of GPIO
descriptors.
While at it, also move the check for memory allocation failure to be below
the allocation to make it more readable.
Cc: stable@vger.kernel.org # 5.0
Fixes: d6cd33ad7102 ("regulator: gpio: Convert to use descriptors")
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250703103549.16558-1-mani@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently, the driver_data of the i2c ID table is wrong, so it won't
work if any mp886x user makes use of the ID table. Fortunately, there's
no such user in upstream source code, we can fix the issue by using
different ID table entry for mp8867 and mp8869.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20250629095918.912-1-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently, the driver_data of the i2c ID table is wrong, so it won't
work if any sy8824x user makes use of the ID table. Fortunately, there's
no such user in upstream source code, we can fix the issue by using
different ID table entry for sy8824c, sy8824e, sy20276 and sy20278.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20250629095905.898-1-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Enable regmap cache to reduce i2c transactions and corresponding
interrupts if regulator is accessed frequently.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20250629095107.804-1-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Enable regmap cache to reduce i2c transactions and corresponding
interrupts if regulator is accessed frequently.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20250629095822.868-1-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Enable regmap cache to reduce i2c transactions and corresponding
interrupts if regulator is accessed frequently.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20250629094803.776-1-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
