| Age | Commit message (Collapse) | Author |
|---|
|
Pull block updates from Jens Axboe:
- NVMe pull requests via Keith:
- Target support for PCI-Endpoint transport (Damien)
- TCP IO queue spreading fixes (Sagi, Chaitanya)
- Target handling for "limited retry" flags (Guixen)
- Poll type fix (Yongsoo)
- Xarray storage error handling (Keisuke)
- Host memory buffer free size fix on error (Francis)
- MD pull requests via Song:
- Reintroduce md-linear (Yu Kuai)
- md-bitmap refactor and fix (Yu Kuai)
- Replace kmap_atomic with kmap_local_page (David Reaver)
- Quite a few queue freeze and debugfs deadlock fixes
Ming introduced lockdep support for this in the 6.13 kernel, and it
has (unsurprisingly) uncovered quite a few issues
- Use const attributes for IO schedulers
- Remove bio ioprio wrappers
- Fixes for stacked device atomic write support
- Refactor queue affinity helpers, in preparation for better supporting
isolated CPUs
- Cleanups of loop O_DIRECT handling
- Cleanup of BLK_MQ_F_* flags
- Add rotational support for null_blk
- Various fixes and cleanups
* tag 'for-6.14/block-20250118' of git://git.kernel.dk/linux: (106 commits)
block: Don't trim an atomic write
block: Add common atomic writes enable flag
md/md-linear: Fix a NULL vs IS_ERR() bug in linear_add()
block: limit disk max sectors to (LLONG_MAX >> 9)
block: Change blk_stack_atomic_writes_limits() unit_min check
block: Ensure start sector is aligned for stacking atomic writes
blk-mq: Move more error handling into blk_mq_submit_bio()
block: Reorder the request allocation code in blk_mq_submit_bio()
nvme: fix bogus kzalloc() return check in nvme_init_effects_log()
md/md-bitmap: move bitmap_{start, end}write to md upper layer
md/raid5: implement pers->bitmap_sector()
md: add a new callback pers->bitmap_sector()
md/md-bitmap: remove the last parameter for bimtap_ops->endwrite()
md/md-bitmap: factor behind write counters out from bitmap_{start/end}write()
md: Replace deprecated kmap_atomic() with kmap_local_page()
md: reintroduce md-linear
partitions: ldm: remove the initial kernel-doc notation
blk-cgroup: rwstat: fix kernel-doc warnings in header file
blk-cgroup: fix kernel-doc warnings in header file
nbd: fix partial sending
...
|
|
Define the transport type NVMF_TRTYPE_PCI for PCI endpoint targets.
This transport type is defined using the value 0 which is reserved in
the NVMe base specifications v2.1 (Figure 294). Given that struct
nvmet_port are zeroed out on creation, to avoid having this transsport
type becoming the new default, nvmet_referral_make() and
nvmet_ports_make() are modified to initialize a port discovery address
transport type field (disc_addr.trtype) to NVMF_TRTYPE_MAX.
Any port using this transport type is also skipped and not reported in
the discovery log page (nvmet_execute_disc_get_log_page()).
The helper function nvmet_is_pci_ctrl() is also introduced to check if
a target controller uses the PCI transport.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Define the new vendor_id and subsys_vendor_id configfs attribute for
target subsystems. These attributes are respectively reported as the
vid field and as the ssvid field of the identify controller data of
a target controllers using the subsystem for which these attributes
are set.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Using mutex lock in IO hot path causes the kernel BUG sleeping while
atomic. Shinichiro[1], first encountered this issue while running blktest
nvme/052 shown below:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:585
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 996, name: (udev-worker)
preempt_count: 0, expected: 0
RCU nest depth: 1, expected: 0
2 locks held by (udev-worker)/996:
#0: ffff8881004570c8 (mapping.invalidate_lock){.+.+}-{3:3}, at: page_cache_ra_unbounded+0x155/0x5c0
#1: ffffffff8607eaa0 (rcu_read_lock){....}-{1:2}, at: blk_mq_flush_plug_list+0xa75/0x1950
CPU: 2 UID: 0 PID: 996 Comm: (udev-worker) Not tainted 6.12.0-rc3+ #339
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x6a/0x90
__might_resched.cold+0x1f7/0x23d
? __pfx___might_resched+0x10/0x10
? vsnprintf+0xdeb/0x18f0
__mutex_lock+0xf4/0x1220
? nvmet_subsys_nsid_exists+0xb9/0x150 [nvmet]
? __pfx_vsnprintf+0x10/0x10
? __pfx___mutex_lock+0x10/0x10
? snprintf+0xa5/0xe0
? xas_load+0x1ce/0x3f0
? nvmet_subsys_nsid_exists+0xb9/0x150 [nvmet]
nvmet_subsys_nsid_exists+0xb9/0x150 [nvmet]
? __pfx_nvmet_subsys_nsid_exists+0x10/0x10 [nvmet]
nvmet_req_find_ns+0x24e/0x300 [nvmet]
nvmet_req_init+0x694/0xd40 [nvmet]
? blk_mq_start_request+0x11c/0x750
? nvme_setup_cmd+0x369/0x990 [nvme_core]
nvme_loop_queue_rq+0x2a7/0x7a0 [nvme_loop]
? __pfx___lock_acquire+0x10/0x10
? __pfx_nvme_loop_queue_rq+0x10/0x10 [nvme_loop]
__blk_mq_issue_directly+0xe2/0x1d0
? __pfx___blk_mq_issue_directly+0x10/0x10
? blk_mq_request_issue_directly+0xc2/0x140
blk_mq_plug_issue_direct+0x13f/0x630
? lock_acquire+0x2d/0xc0
? blk_mq_flush_plug_list+0xa75/0x1950
blk_mq_flush_plug_list+0xa9d/0x1950
? __pfx_blk_mq_flush_plug_list+0x10/0x10
? __pfx_mpage_readahead+0x10/0x10
__blk_flush_plug+0x278/0x4d0
? __pfx___blk_flush_plug+0x10/0x10
? lock_release+0x460/0x7a0
blk_finish_plug+0x4e/0x90
read_pages+0x51b/0xbc0
? __pfx_read_pages+0x10/0x10
? lock_release+0x460/0x7a0
page_cache_ra_unbounded+0x326/0x5c0
force_page_cache_ra+0x1ea/0x2f0
filemap_get_pages+0x59e/0x17b0
? __pfx_filemap_get_pages+0x10/0x10
? lock_is_held_type+0xd5/0x130
? __pfx___might_resched+0x10/0x10
? find_held_lock+0x2d/0x110
filemap_read+0x317/0xb70
? up_write+0x1ba/0x510
? __pfx_filemap_read+0x10/0x10
? inode_security+0x54/0xf0
? selinux_file_permission+0x36d/0x420
blkdev_read_iter+0x143/0x3b0
vfs_read+0x6ac/0xa20
? __pfx_vfs_read+0x10/0x10
? __pfx_vm_mmap_pgoff+0x10/0x10
? __pfx___seccomp_filter+0x10/0x10
ksys_read+0xf7/0x1d0
? __pfx_ksys_read+0x10/0x10
do_syscall_64+0x93/0x180
? lockdep_hardirqs_on_prepare+0x16d/0x400
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on+0x78/0x100
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on_prepare+0x16d/0x400
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f565bd1ce11
Code: 00 48 8b 15 09 90 0d 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd e8 d0 ad 01 00 f3 0f 1e fa 80 3d 35 12 0e 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 4f c3 66 0f 1f 44 00 00 55 48 89 e5 48 83 ec
RSP: 002b:00007ffd6e7a20c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 0000000000001000 RCX: 00007f565bd1ce11
RDX: 0000000000001000 RSI: 00007f565babb000 RDI: 0000000000000014
RBP: 00007ffd6e7a2130 R08: 00000000ffffffff R09: 0000000000000000
R10: 0000556000bfa610 R11: 0000000000000246 R12: 000000003ffff000
R13: 0000556000bfa5b0 R14: 0000000000000e00 R15: 0000556000c07328
</TASK>
Apparently, the above issue is caused due to using mutex lock while
we're in IO hot path. It's a regression caused with commit 505363957fad
("nvmet: fix nvme status code when namespace is disabled"). The mutex
->su_mutex is used to find whether a disabled nsid exists in the config
group or not. This is to differentiate between a nsid that is disabled
vs non-existent.
To mitigate the above issue, we've worked upon a fix[2] where we now
insert nsid in subsys Xarray as soon as it's created under config group
and later when that nsid is enabled, we add an Xarray mark on it and set
ns->enabled to true. The Xarray mark is useful while we need to loop
through all enabled namepsaces under a subsystem using xa_for_each_marked()
API. If later a nsid is disabled then we clear Xarray mark from it and also
set ns->enabled to false. It's only when nsid is deleted from the config
group we delete it from the Xarray.
So with this change, now we could easily differentiate a nsid is disabled
(i.e. Xarray entry for ns exists but ns->enabled is set to false) vs non-
existent (i.e.Xarray entry for ns doesn't exist).
Link: https://lore.kernel.org/linux-nvme/20241022070252.GA11389@lst.de/ [2]
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Closes: https://lore.kernel.org/linux-nvme/tqcy3sveity7p56v7ywp7ssyviwcb3w4623cnxj3knoobfcanq@yxgt2mjkbkam/ [1]
Fixes: 505363957fad ("nvmet: fix nvme status code when namespace is disabled")
Fix-suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
nvmet_root_discovery_nqn_store treats the subsysnqn string like a fixed
size buffer, even though it is dynamically allocated to the size of the
string.
Create a new string with kstrndup instead of using the old buffer.
Reported-by: syzbot+ff4aab278fa7e27e0f9e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ff4aab278fa7e27e0f9e
Fixes: 95409e277d83 ("nvmet: implement unique discovery NQN")
Signed-off-by: Leo Stone <leocstone@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This patch implements the reservation feature, including:
1. reservation register(register, unregister and replace).
2. reservation acquire(acquire, preempt, preempt and abort).
3. reservation release(release and clear).
4. reservation report.
5. set feature and get feature of reservation notify mask.
6. get log page of reservation event.
Not supported:
1. persistent reservation through power loss.
Test cases:
Use nvme-cli and fio to test all implemented sub features:
1. use nvme resv-register to register host a registrant or
unregister or replace a new key.
2. use nvme resv-acquire to set host to the holder, and use fio
to send read and write io in all reservation type. And also
test preempt and "preempt and abort".
3. use nvme resv-report to show all registrants and reservation
status.
4. use nvme resv-release to release all registrants.
5. use nvme get-log to get events generated by the preceding
operations.
In addition, make reservation configurable, one can set ns to
support reservation before enable ns. The default of resv_enable
is false.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The RDMA transport defines values for TSAS, but it cannot be changed as
we only support the 'connected' mode.
So to avoid errors during reconfiguration we should allow to write the
current value.
Fixes: 3f123494db72 ("nvmet: make TCP sectype settable via configfs")
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The 'TSAS' value is only defined for TCP and RDMA, but returning
'reserved' for undefined values tricked nvmetcli to try to write
'reserved' when restoring from a config file. This caused an error
and the configuration would not be applied.
Fixes: 3f123494db72 ("nvmet: make TCP sectype settable via configfs")
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
When disabling an nvmet namespace, there is a period where the
subsys->lock is released, as the ns disable waits for backend IO to
complete, and the ns percpu ref to be properly killed. The original
intent was to avoid taking the subsystem lock for a prolong period as
other processes may need to acquire it (for example new incoming
connections).
However, it opens up a window where another process may come in and
enable the ns, (re)intiailizing the ns percpu_ref, causing the disable
sequence to hang.
Solve this by taking the global nvmet_config_sem over the entire configfs
enable/disable sequence.
Fixes: a07b4970f464 ("nvmet: add a generic NVMe target")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Pull NVMe updates and fixes from Keith:
"nvme updates for Linux 6.10
- Fabrics connection retries (Daniel, Hannes)
- Fabrics logging enhancements (Tokunori)
- RDMA delete optimization (Sagi)"
* tag 'nvme-6.10-2024-05-14' of git://git.infradead.org/nvme:
nvme-rdma, nvme-tcp: include max reconnects for reconnect logging
nvmet-rdma: Avoid o(n^2) loop in delete_ctrl
nvme: do not retry authentication failures
nvme-fabrics: short-circuit reconnect retries
nvme: return kernel error codes for admin queue connect
nvmet: return DHCHAP status codes from nvmet_setup_auth()
nvmet: lock config semaphore when accessing DH-HMAC-CHAP key
|
|
The nsid value is a u32 that comes from nvmet_req_find_ns(). It's
endian data and we're on an error path and both of those raise red
flags. So let's make this safer.
1) Make the buffer large enough for any u32.
2) Remove the unnecessary initialization.
3) Use snprintf() instead of sprintf() for even more safety.
4) The sprintf() function returns the number of bytes printed, not
counting the NUL terminator. It is impossible for the return value to
be <= 0 so delete that.
Fixes: 505363957fad ("nvmet: fix nvme status code when namespace is disabled")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
When the DH-HMAC-CHAP key is accessed via configfs we need to take the
config semaphore as a reconnect might be running at the same time.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
If the user disabled a nvmet namespace, it is removed from the subsystem
namespaces list. When nvmet processes a command directed to an nsid that
was disabled, it cannot differentiate between a nsid that is disabled
vs. a non-existent namespace, and resorts to return NVME_SC_INVALID_NS
with the dnr bit set.
This translates to a non-retryable status for the host, which translates
to a user error. We should expect disabled namespaces to not cause an
I/O error in a multipath environment.
Address this by searching a configfs item for the namespace nvmet failed
to find, and if we found one, conclude that the namespace is disabled
(perhaps temporarily). Return NVME_SC_INTERNAL_PATH_ERROR in this case
and keep DNR bit cleared.
Reported-by: Jirong Feng <jirong.feng@easystack.cn>
Tested-by: Jirong Feng <jirong.feng@easystack.cn>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Unique discovery NQNs allow to differentiate between discovery
services from (typically physically separate) NVMe-oF subsystems.
This is required for establishing secured connections as otherwise
the credentials won't be unique and the integrity of the connection
cannot be guaranteed.
This patch adds a configfs attribute 'discovery_nqn' in the 'nvmet'
configfs directory to specify the unique discovery NQN.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Using this port configuration, one will be able to set the maximal queue
size to be used for any controller that will be associated to the
configured port.
The default value stayed 1024 but each transport will be able to set the
its own values before enabling the port.
Introduce lower limit of 16 for minimal queue depth (same as we use in
the host fabrics drivers).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Guixin Liu <kanie@linux.alibaba.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Pull block updates from Jens Axboe:
"Pretty quiet round this time around. This contains:
- NVMe updates via Keith:
- nvme fabrics spec updates (Guixin, Max)
- nvme target udpates (Guixin, Evan)
- nvme attribute refactoring (Daniel)
- nvme-fc numa fix (Keith)
- MD updates via Song:
- Fix/Cleanup RCU usage from conf->disks[i].rdev (Yu Kuai)
- Fix raid5 hang issue (Junxiao Bi)
- Add Yu Kuai as Reviewer of the md subsystem
- Remove deprecated flavors (Song Liu)
- raid1 read error check support (Li Nan)
- Better handle events off-by-1 case (Alex Lyakas)
- Efficiency improvements for passthrough (Kundan)
- Support for mapping integrity data directly (Keith)
- Zoned write fix (Damien)
- rnbd fixes (Kees, Santosh, Supriti)
- Default to a sane discard size granularity (Christoph)
- Make the default max transfer size naming less confusing
(Christoph)
- Remove support for deprecated host aware zoned model (Christoph)
- Misc fixes (me, Li, Matthew, Min, Ming, Randy, liyouhong, Daniel,
Bart, Christoph)"
* tag 'for-6.8/block-2024-01-08' of git://git.kernel.dk/linux: (78 commits)
block: Treat sequential write preferred zone type as invalid
block: remove disk_clear_zoned
sd: remove the !ZBC && blk_queue_is_zoned case in sd_read_block_characteristics
drivers/block/xen-blkback/common.h: Fix spelling typo in comment
blk-cgroup: fix rcu lockdep warning in blkg_lookup()
blk-cgroup: don't use removal safe list iterators
block: floor the discard granularity to the physical block size
mtd_blkdevs: use the default discard granularity
bcache: use the default discard granularity
zram: use the default discard granularity
null_blk: use the default discard granularity
nbd: use the default discard granularity
ubd: use the default discard granularity
block: default the discard granularity to sector size
bcache: discard_granularity should not be smaller than a sector
block: remove two comments in bio_split_discard
block: rename and document BLK_DEF_MAX_SECTORS
loop: don't abuse BLK_DEF_MAX_SECTORS
aoe: don't abuse BLK_DEF_MAX_SECTORS
null_blk: don't cap max_hw_sectors to BLK_DEF_MAX_SECTORS
...
|
|
When the user wants to restrict to only creating one controller,
they can set cntlid_min and cntlid_max to the same value.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This patch fixes the smatch warning, "nvmet_ns_ana_grpid_store() warn:
potential spectre issue 'nvmet_ana_group_enabled' [w] (local cap)"
Prevent the contents of kernel memory from being leaked to user space
via speculative execution by using array_index_nospec.
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
In configurations without CONFIG_NVME_TARGET_TCP_TLS, the keyring
code might not be available, or using it will result in a runtime
failure:
x86_64-linux-ld: vmlinux.o: in function `nvmet_ports_make':
configfs.c:(.text+0x100a211): undefined reference to `nvme_keyring_id'
Add a check to ensure we only check the keyring if there is a chance
of it being used, which avoids both the runtime and link-time
problems.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231122224719.4042108-2-arnd@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Incoming connection might be either 'normal' NVMe-TCP connections
starting with icreq or TLS handshakes. To ensure that 'normal'
connections can still be handled we need to peek the first packet
and only start TLS handshake if it's not an icreq.
With that we can lift the restriction to always set TREQ to
'required' when TLS1.3 is enabled.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
TLS handshake is handled in userspace with the netlink tls handshake
protocol.
The patch adds a function to start the TLS handshake upcall for any
incoming network connections if the TCP TSAS sectype is set to 'tls1.3'.
A config option NVME_TARGET_TCP_TLS selects whether the TLS handshake
upcall should be compiled in. The patch also adds reference counting
to struct nvmet_tcp_queue to ensure the queue is always valid when the
the TLS handshake completes.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The current implementation does not support secure concatenation,
so 'TREQ' is always set to 'required' when TLS is enabled.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Add a new configfs attribute 'addr_tsas' to make the TCP sectype
settable via configfs.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Pull block updates from Jens Axboe:
- NVMe pull requests via Christoph:
- Support some passthrough commands without CAP_SYS_ADMIN (Kanchan
Joshi)
- Refactor PCIe probing and reset (Christoph Hellwig)
- Various fabrics authentication fixes and improvements (Sagi
Grimberg)
- Avoid fallback to sequential scan due to transient issues (Uday
Shankar)
- Implement support for the DEAC bit in Write Zeroes (Christoph
Hellwig)
- Allow overriding the IEEE OUI and firmware revision in configfs
for nvmet (Aleksandr Miloserdov)
- Force reconnect when number of queue changes in nvmet (Daniel
Wagner)
- Minor fixes and improvements (Uros Bizjak, Joel Granados, Sagi
Grimberg, Christoph Hellwig, Christophe JAILLET)
- Fix and cleanup nvme-fc req allocation (Chaitanya Kulkarni)
- Use the common tagset helpers in nvme-pci driver (Christoph
Hellwig)
- Cleanup the nvme-pci removal path (Christoph Hellwig)
- Use kstrtobool() instead of strtobool (Christophe JAILLET)
- Allow unprivileged passthrough of Identify Controller (Joel
Granados)
- Support io stats on the mpath device (Sagi Grimberg)
- Minor nvmet cleanup (Sagi Grimberg)
- MD pull requests via Song:
- Code cleanups (Christoph)
- Various fixes
- Floppy pull request from Denis:
- Fix a memory leak in the init error path (Yuan)
- Series fixing some batch wakeup issues with sbitmap (Gabriel)
- Removal of the pktcdvd driver that was deprecated more than 5 years
ago, and subsequent removal of the devnode callback in struct
block_device_operations as no users are now left (Greg)
- Fix for partition read on an exclusively opened bdev (Jan)
- Series of elevator API cleanups (Jinlong, Christoph)
- Series of fixes and cleanups for blk-iocost (Kemeng)
- Series of fixes and cleanups for blk-throttle (Kemeng)
- Series adding concurrent support for sync queues in BFQ (Yu)
- Series bringing drbd a bit closer to the out-of-tree maintained
version (Christian, Joel, Lars, Philipp)
- Misc drbd fixes (Wang)
- blk-wbt fixes and tweaks for enable/disable (Yu)
- Fixes for mq-deadline for zoned devices (Damien)
- Add support for read-only and offline zones for null_blk
(Shin'ichiro)
- Series fixing the delayed holder tracking, as used by DM (Yu,
Christoph)
- Series enabling bio alloc caching for IRQ based IO (Pavel)
- Series enabling userspace peer-to-peer DMA (Logan)
- BFQ waker fixes (Khazhismel)
- Series fixing elevator refcount issues (Christoph, Jinlong)
- Series cleaning up references around queue destruction (Christoph)
- Series doing quiesce by tagset, enabling cleanups in drivers
(Christoph, Chao)
- Series untangling the queue kobject and queue references (Christoph)
- Misc fixes and cleanups (Bart, David, Dawei, Jinlong, Kemeng, Ye,
Yang, Waiman, Shin'ichiro, Randy, Pankaj, Christoph)
* tag 'for-6.2/block-2022-12-08' of git://git.kernel.dk/linux: (247 commits)
blktrace: Fix output non-blktrace event when blk_classic option enabled
block: sed-opal: Don't include <linux/kernel.h>
sed-opal: allow using IOC_OPAL_SAVE for locking too
blk-cgroup: Fix typo in comment
block: remove bio_set_op_attrs
nvmet: don't open-code NVME_NS_ATTR_RO enumeration
nvme-pci: use the tagset alloc/free helpers
nvme: add the Apple shared tag workaround to nvme_alloc_io_tag_set
nvme: only set reserved_tags in nvme_alloc_io_tag_set for fabrics controllers
nvme: consolidate setting the tagset flags
nvme: pass nr_maps explicitly to nvme_alloc_io_tag_set
block: bio_copy_data_iter
nvme-pci: split out a nvme_pci_ctrl_is_dead helper
nvme-pci: return early on ctrl state mismatch in nvme_reset_work
nvme-pci: rename nvme_disable_io_queues
nvme-pci: cleanup nvme_suspend_queue
nvme-pci: remove nvme_pci_disable
nvme-pci: remove nvme_disable_admin_queue
nvme: merge nvme_shutdown_ctrl into nvme_disable_ctrl
nvme: use nvme_wait_ready in nvme_shutdown_ctrl
...
|
|
strtobool() is the same as kstrtobool().
However, the latter is more used within the kernel.
In order to remove strtobool() and slightly simplify kstrtox.h, switch to
the other function name.
While at it, include the corresponding header file (<linux/kstrtox.h>)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Allow user to set currently active firmware revision
Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Reviewed-by: Dmitriy Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Aleksandr Miloserdov <a.miloserdov@yadro.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Allow user to set OUI for the controller vendor.
Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Reviewed-by: Dmitriy Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Aleksandr Miloserdov <a.miloserdov@yadro.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
In order to test queue number changes we need to make sure that the
host reconnects. Because only when the host disconnects from the
target the number of queues are allowed to change according the spec.
The initial idea was to disable and re-enable the ports and have the
host wait until the KATO timer expires, triggering error
recovery. Though the host would see a DNR reply when trying to
reconnect. Because of the DNR bit the connection is dropped
completely. There is no point in trying to reconnect with the same
parameters according the spec.
We can force to reconnect the host is by deleting all controllers. The
host will observe any newly posted request to fail and thus starts the
error recovery but this time without the DNR bit set.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
We need to also free the dhchap_ctrl_secret when releasing nvmet_host.
kmemleak complaint:
--
unreferenced object 0xffff99b1cbca5140 (size 64):
comm "check", pid 4864, jiffies 4305092436 (age 2913.583s)
hex dump (first 32 bytes):
44 48 48 43 2d 31 3a 30 30 3a 65 36 2b 41 63 44 DHHC-1:00:e6+AcD
39 76 47 4d 52 57 59 78 67 54 47 44 51 59 47 78 9vGMRWYxgTGDQYGx
backtrace:
[<00000000c07d369d>] kstrdup+0x2e/0x60
[<000000001372171c>] 0xffffffffc0cceec6
[<0000000010dbf50b>] 0xffffffffc0cc6783
[<000000007465e93c>] configfs_write_iter+0xb1/0x120
[<0000000039c23f62>] vfs_write+0x2be/0x3c0
[<000000002da4351c>] ksys_write+0x5f/0xe0
[<00000000d5011e32>] do_syscall_64+0x38/0x90
[<00000000503870cf>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: db1312dd9548 ("nvmet: implement basic In-Band Authentication")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Since model_number is allocated before it needs to be freed before
kmemdump_nul.
Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Reviewed-by: Dmitriy Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Aleksandr Miloserdov <a.miloserdov@yadro.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The item passed into nvmet_subsys_attr_qid_max_show is not a member of
struct nvmet_port, it is part of nvmet_subsys. Hence, don't try to
dereference it as struct nvme_ctrl pointer.
Fixes: 3e980f5995e0 ("nvmet: Expose max queues to configfs")
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20220913064203.133536-1-dwagner@suse.de
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Allow to set the max queues the target supports. This is useful for
testing the reconnect attempt of the host with changing numbers of
supported queues.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
And add an empty line after the variable declaration.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Implement Diffie-Hellman key exchange using FFDHE groups for NVMe
In-Band Authentication.
This patch adds a new host configfs attribute 'dhchap_dhgroup' to
select the FFDHE group to use.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Implement NVMe-oF In-Band authentication according to NVMe TPAR 8006.
This patch adds three additional configfs entries 'dhchap_key',
'dhchap_ctrl_key', and 'dhchap_hash' to the 'host' configfs directory.
The 'dhchap_key' and 'dhchap_ctrl_key' entries need to be in the ASCII
format as specified in NVMe Base Specification v2.0 section 8.13.5.8
'Secret representation'.
'dhchap_hash' defaults to 'hmac(sha256)', and can be written to to
switch to a different HMAC algorithm.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If the clear_ids attribute is set to true, the EUI/GUID/UUID is cleared
for the passthru target. By default, loop targets will set clear_ids to
true.
This resolves an issue where a connect to a passthru target fails when
using a trtype of 'loop' because EUI/GUID/UUID is not unique.
Fixes: 2079f41ec6ff ("nvme: check that EUI/GUID/UUID are globally unique")
Signed-off-by: Alan Adamson <alan.adamson@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Pull block driver fixes from Jens Axboe:
"Followup block driver updates and fixes for the 5.18-rc1 merge window.
In detail:
- NVMe pull request
- Fix multipath hang when disk goes live over reconnect (Anton
Eidelman)
- fix RCU hole that allowed for endless looping in multipath
round robin (Chris Leech)
- remove redundant assignment after left shift (Colin Ian King)
- add quirks for Samsung X5 SSDs (Monish Kumar R)
- fix the read-only state for zoned namespaces with unsupposed
features (Pankaj Raghav)
- use a private workqueue instead of the system workqueue in
nvmet (Sagi Grimberg)
- allow duplicate NSIDs for private namespaces (Sungup Moon)
- expose use_threaded_interrupts read-only in sysfs (Xin Hao)"
- nbd minor allocation fix (Zhang)
- drbd fixes and maintainer addition (Lars, Jakob, Christoph)
- n64cart build fix (Jackie)
- loop compat ioctl fix (Carlos)
- misc fixes (Colin, Dongli)"
* tag 'for-5.18/drivers-2022-04-01' of git://git.kernel.dk/linux-block:
drbd: remove check of list iterator against head past the loop body
drbd: remove usage of list iterator variable after loop
nbd: fix possible overflow on 'first_minor' in nbd_dev_add()
MAINTAINERS: add drbd co-maintainer
drbd: fix potential silent data corruption
loop: fix ioctl calls using compat_loop_info
nvme-multipath: fix hang when disk goes live over reconnect
nvme: fix RCU hole that allowed for endless looping in multipath round robin
nvme: allow duplicate NSIDs for private namespaces
nvmet: remove redundant assignment after left shift
nvmet: use a private workqueue instead of the system workqueue
nvme-pci: add quirks for Samsung X5 SSDs
nvme-pci: expose use_threaded_interrupts read-only in sysfs
nvme: fix the read-only state for zoned namespaces with unsupposed features
n64cart: convert bi_disk to bi_bdev->bd_disk fix build
xen/blkfront: fix comment for need_copy
xen-blkback: remove redundant assignment to variable i
|
|
Any attempt to flush kernel-global WQs has possibility of deadlock
so we should simply stop using them, instead introduce nvmet_wq
which is the generic nvmet workqueue for work elements that
don't explicitly require a dedicated workqueue (by the mere fact
that they are using the system_wq).
Changes were done using the following replaces:
- s/schedule_work(/queue_work(nvmet_wq, /g
- s/schedule_delayed_work(/queue_delayed_work(nvmet_wq, /g
- s/flush_scheduled_work()/flush_workqueue(nvmet_wq)/g
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Pull block driver updates from Jens Axboe:
- NVMe updates via Christoph:
- add vectored-io support for user-passthrough (Kanchan Joshi)
- add verbose error logging (Alan Adamson)
- support buffered I/O on block devices in nvmet (Chaitanya
Kulkarni)
- central discovery controller support (Martin Belanger)
- fix and extended the globally unique idenfier validation
(Christoph)
- move away from the deprecated IDA APIs (Sagi Grimberg)
- misc code cleanup (Keith Busch, Max Gurtovoy, Qinghua Jin,
Chaitanya Kulkarni)
- add lockdep annotations for in-kernel sockets (Chris Leech)
- use vmalloc for ANA log buffer (Hannes Reinecke)
- kerneldoc fixes (Chaitanya Kulkarni)
- cleanups (Guoqing Jiang, Chaitanya Kulkarni, Christoph)
- warn about shared namespaces without multipathing (Christoph)
- MD updates via Song with a set of cleanups (Christoph, Mariusz, Paul,
Erik, Dirk)
- loop cleanups and queue depth configuration (Chaitanya)
- null_blk cleanups and fixes (Chaitanya)
- Use descriptive init/exit names in virtio_blk (Randy)
- Use bvec_kmap_local() in drivers (Christoph)
- bcache fixes (Mingzhe)
- xen blk-front persistent grant speedups (Juergen)
- rnbd fix and cleanup (Gioh)
- Misc fixes (Christophe, Colin)
* tag 'for-5.18/drivers-2022-03-18' of git://git.kernel.dk/linux-block: (76 commits)
virtio_blk: eliminate anonymous module_init & module_exit
nvme: warn about shared namespaces without CONFIG_NVME_MULTIPATH
nvme: remove nvme_alloc_request and nvme_alloc_request_qid
nvme: cleanup how disk->disk_name is assigned
nvmet: move the call to nvmet_ns_changed out of nvmet_ns_revalidate
nvmet: use snprintf() with PAGE_SIZE in configfs
nvmet: don't fold lines
nvmet-rdma: fix kernel-doc warning for nvmet_rdma_device_removal
nvmet-fc: fix kernel-doc warning for nvmet_fc_unregister_targetport
nvmet-fc: fix kernel-doc warning for nvmet_fc_register_targetport
nvme-tcp: lockdep: annotate in-kernel sockets
nvme-tcp: don't fold the line
nvme-tcp: don't initialize ret variable
nvme-multipath: call bio_io_error in nvme_ns_head_submit_bio
nvme-multipath: use vmalloc for ANA log buffer
xen/blkfront: speed up purge_persistent_grants()
raid5: initialize the stripe_head embeeded bios as needed
raid5-cache: statically allocate the recovery ra bio
raid5-cache: fully initialize flush_bio when needed
raid5-ppl: fully initialize the bio in ppl_new_iounit
...
|
|
Revert commit 626851e9225d ("nvmet: make discovery NQN configurable");
the interface was deemed incorrect and will be replaced with a different
one.
Fixes: 626851e9225d ("nvmet: make discovery NQN configurable")
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
nvmet_ns_changed states via lockdep that the ns->subsys->lock must be
held. The only caller of nvmet_ns_changed which does not acquire that
lock is nvmet_ns_revalidate. nvmet_ns_revalidate has 3 callers,
of which 2 do not acquire that lock: nvmet_execute_identify_cns_cs_ns
and nvmet_execute_identify_ns. The other caller
nvmet_ns_revalidate_size_store does acquire the lock.
Move the call to nvmet_ns_changed from nvmet_ns_revalidate to the callers
so that they can perform the correct locking as needed.
This issue was found using a static type-based analyser and manually
verified.
Reported-by: Niels Dossche <dossche.niels@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
|
|
Instead of using sprintf, use snprintf with buffer size limited to
PAGE_SIZE just like what we have for the rest of the file.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Don't fold line that can fit into 80 char limit. No functional change
in this patch.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
TPAR8013 allows for unique discovery NQNs, so make the discovery
controller NQN configurable by exposing a subsys attribute
'discovery_nqn'.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When a port is removed through configfs, any connected controllers
are starting teardown flow asynchronously and can still send commands.
This causes a use-after-free bug for any command that dereferences
req->port (like in nvmet_parse_io_cmd).
To fix this, wait for all the teardown scheduled works to complete
(like release_work at rdma/tcp drivers). This ensures there are no
active controllers when the port is eventually removed.
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This was intended to limit the number of characters printed from
"subsys->serial" to NVMET_SN_MAX_SIZE. But accidentally the width
specifier was used instead of the precision specifier so it only
affects the alignment and not the number of characters printed.
Fixes: f04064814c2a ("nvmet: fixup buffer overrun in nvmet_subsys_attr_serial()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The serial number is copied into the buffer via memcpy_and_pad()
with the length NVMET_SN_MAX_SIZE. So when printing out we also
need to take just that length as anything beyond that will be
uninitialized.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The target core code never needs the host-side nvme_ctrl structure.
Open code two uses of nvmet_is_passthru_req in passthru.c, and then
switch the helpers used by the core to return bool. Also rename the
fuctions to better match their usage:
nvmet_passthru_ctrl -> nvmet_is_passthru_subsys
nvmet_req_passthru_ctrl -> nvmet_is_passthru_req
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
|
|
Once some host has connected to the nvmf target, make sure that the
version number is stable and cannot be changed.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Noam Gottlieb <ngottlieb@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Currently, once the subsystem's model_number is set for the first time
there is no way to change it. However, as long as no connection was
established to nvmf target, there is no reason for such restriction and
we should allow to change the subsystem's model_number as many times as
needed.
In addition, in order to simplfy the changes and make the model number
flow more similar to the rest of the attributes in the Identify
Controller data structure, we set a default value for the model number
at the initiation of the subsystem.
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Noam Gottlieb <ngottlieb@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
