| Age | Commit message (Collapse) | Author |
|---|
|
Pull block updates from Jens Axboe:
- MD pull request via Yu:
- call del_gendisk synchronously (Xiao)
- cleanup unused variable (John)
- cleanup workqueue flags (Ryo)
- fix faulty rdev can't be removed during resync (Qixing)
- NVMe pull request via Christoph:
- try PCIe function level reset on init failure (Keith Busch)
- log TLS handshake failures at error level (Maurizio Lombardi)
- pci-epf: do not complete commands twice if nvmet_req_init()
fails (Rick Wertenbroek)
- misc cleanups (Alok Tiwari)
- Removal of the pktcdvd driver
This has been more than a decade coming at this point, and some
recently revealed breakages that had it causing issues even for cases
where it isn't required made me re-pull the trigger on this one. It's
known broken and nobody has stepped up to maintain the code
- Series for ublk supporting batch commands, enabling the use of
multishot where appropriate
- Speed up ublk exit handling
- Fix for the two-stage elevator fixing which could leak data
- Convert NVMe to use the new IOVA based API
- Increase default max transfer size to something more reasonable
- Series fixing write operations on zoned DM devices
- Add tracepoints for zoned block device operations
- Prep series working towards improving blk-mq queue management in the
presence of isolated CPUs
- Don't allow updating of the block size of a loop device that is
currently under exclusively ownership/open
- Set chunk sectors from stacked device stripe size and use it for the
atomic write size limit
- Switch to folios in bcache read_super()
- Fix for CD-ROM MRW exit flush handling
- Various tweaks, fixes, and cleanups
* tag 'for-6.17/block-20250728' of git://git.kernel.dk/linux: (94 commits)
block: restore two stage elevator switch while running nr_hw_queue update
cdrom: Call cdrom_mrw_exit from cdrom_release function
sunvdc: Balance device refcount in vdc_port_mpgroup_check
nvme-pci: try function level reset on init failure
dm: split write BIOs on zone boundaries when zone append is not emulated
block: use chunk_sectors when evaluating stacked atomic write limits
dm-stripe: limit chunk_sectors to the stripe size
md/raid10: set chunk_sectors limit
md/raid0: set chunk_sectors limit
block: sanitize chunk_sectors for atomic write limits
ilog2: add max_pow_of_two_factor()
nvmet: pci-epf: Do not complete commands twice if nvmet_req_init() fails
nvme-tcp: log TLS handshake failures at error level
docs: nvme: fix grammar in nvme-pci-endpoint-target.rst
nvme: fix typo in status code constant for self-test in progress
nvmet: remove redundant assignment of error code in nvmet_ns_enable()
nvme: fix incorrect variable in io cqes error message
nvme: fix multiple spelling and grammar issues in host drivers
block: fix blk_zone_append_update_request_bio() kernel-doc
md/raid10: fix set but not used variable in sync_request_write()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs 'protection info' updates from Christian Brauner:
"This adds the new FS_IOC_GETLBMD_CAP ioctl() to query metadata and
protection info (PI) capabilities. This ioctl returns information
about the files integrity profile. This is useful for userspace
applications to understand a files end-to-end data protection support
and configure the I/O accordingly.
For now this interface is only supported by block devices. However the
design and placement of this ioctl in generic FS ioctl space allows us
to extend it to work over files as well. This maybe useful when
filesystems start supporting PI-aware layouts.
A new structure struct logical_block_metadata_cap is introduced, which
contains the following fields:
- lbmd_flags:
bitmask of logical block metadata capability flags
- lbmd_interval:
the amount of data described by each unit of logical block metadata
- lbmd_size:
size in bytes of the logical block metadata associated with each
interval
- lbmd_opaque_size:
size in bytes of the opaque block tag associated with each interval
- lbmd_opaque_offset:
offset in bytes of the opaque block tag within the logical block
metadata
- lbmd_pi_size:
size in bytes of the T10 PI tuple associated with each interval
- lbmd_pi_offset:
offset in bytes of T10 PI tuple within the logical block metadata
- lbmd_pi_guard_tag_type:
T10 PI guard tag type
- lbmd_pi_app_tag_size:
size in bytes of the T10 PI application tag
- lbmd_pi_ref_tag_size:
size in bytes of the T10 PI reference tag
- lbmd_pi_storage_tag_size:
size in bytes of the T10 PI storage tag
The internal logic to fetch the capability is encapsulated in a helper
function blk_get_meta_cap(), which uses the blk_integrity profile
associated with the device. The ioctl returns -EOPNOTSUPP, if
CONFIG_BLK_DEV_INTEGRITY is not enabled"
* tag 'vfs-6.17-rc1.integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
block: fix lbmd_guard_tag_type assignment in FS_IOC_GETLBMD_CAP
block: fix FS_IOC_GETLBMD_CAP parsing in blkdev_common_ioctl()
fs: add ioctl to query metadata and protection info capabilities
nvme: set pi_offset only when checksum type is not BLK_INTEGRITY_CSUM_NONE
block: introduce pi_tuple_size field in blk_integrity
block: rename tuple_size field in blk_integrity to metadata_size
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull fallocate updates from Christian Brauner:
"fallocate() currently supports creating preallocated files
efficiently. However, on most filesystems fallocate() will preallocate
blocks in an unwriten state even if FALLOC_FL_ZERO_RANGE is specified.
The extent state must later be converted to a written state when the
user writes data into this range, which can trigger numerous metadata
changes and journal I/O. This may leads to significant write
amplification and performance degradation in synchronous write mode.
At the moment, the only method to avoid this is to create an empty
file and write zero data into it (for example, using 'dd' with a large
block size). However, this method is slow and consumes a considerable
amount of disk bandwidth.
Now that more and more flash-based storage devices are available it is
possible to efficiently write zeros to SSDs using the unmap write
zeroes command if the devices do not write physical zeroes to the
media.
For example, if SCSI SSDs support the UMMAP bit or NVMe SSDs support
the DEAC bit[1], the write zeroes command does not write actual data
to the device, instead, NVMe converts the zeroed range to a
deallocated state, which works fast and consumes almost no disk write
bandwidth.
This series implements the BLK_FEAT_WRITE_ZEROES_UNMAP feature and
BLK_FLAG_WRITE_ZEROES_UNMAP_DISABLED flag for SCSI, NVMe and
device-mapper drivers, and add the FALLOC_FL_WRITE_ZEROES and
STATX_ATTR_WRITE_ZEROES_UNMAP support for ext4 and raw bdev devices.
fallocate() is subsequently extended with the FALLOC_FL_WRITE_ZEROES
flag. FALLOC_FL_WRITE_ZEROES zeroes a specified file range in such a
way that subsequent writes to that range do not require further
changes to the file mapping metadata. This flag is beneficial for
subsequent pure overwriting within this range, as it can save on block
allocation and, consequently, significant metadata changes"
* tag 'vfs-6.17-rc1.fallocate' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
ext4: add FALLOC_FL_WRITE_ZEROES support
block: add FALLOC_FL_WRITE_ZEROES support
block: factor out common part in blkdev_fallocate()
fs: introduce FALLOC_FL_WRITE_ZEROES to fallocate
dm: clear unmap write zeroes limits when disabling write zeroes
scsi: sd: set max_hw_wzeroes_unmap_sectors if device supports SD_ZERO_*_UNMAP
nvmet: set WZDS and DRB if device enables unmap write zeroes operation
nvme: set max_hw_wzeroes_unmap_sectors if device supports DEAC bit
block: introduce max_{hw|user}_wzeroes_unmap_sectors to queue limits
|
|
Pull block fixes from Jens Axboe:
- NVMe changes via Christoph:
- revert the cross-controller atomic write size validation
that caused regressions (Christoph Hellwig)
- fix endianness of command word printout in
nvme_log_err_passthru() (John Garry)
- fix callback lock for TLS handshake (Maurizio Lombardi)
- fix misaccounting of nvme-mpath inflight I/O (Yu Kuai)
- fix inconsistent RCU list manipulation in
nvme_ns_add_to_ctrl_list() (Zheng Qixing)
- Fix for a kobject leak in queue unregistration
- Fix for loop async file write start/end handling
* tag 'block-6.16-20250718' of git://git.kernel.dk/linux:
loop: use kiocb helpers to fix lockdep warning
nvmet-tcp: fix callback lock for TLS handshake
nvme: fix misaccounting of nvme-mpath inflight I/O
nvme: revert the cross-controller atomic write size validation
nvme: fix endianness of command word prints in nvme_log_err_passthru()
nvme: fix inconsistent RCU list manipulation in nvme_ns_add_to_ctrl_list()
block: fix kobject leak in blk_unregister_queue
|
|
Have nvmet_req_init() and req->execute() complete failed commands.
Description of the problem:
nvmet_req_init() calls __nvmet_req_complete() internally upon failure,
e.g., unsupported opcode, which calls the "queue_response" callback,
this results in nvmet_pci_epf_queue_response() being called, which will
call nvmet_pci_epf_complete_iod() if data_len is 0 or if dma_dir is
different from DMA_TO_DEVICE. This results in a double completion as
nvmet_pci_epf_exec_iod_work() also calls nvmet_pci_epf_complete_iod()
when nvmet_req_init() fails.
Steps to reproduce:
On the host send a command with an unsupported opcode with nvme-cli,
For example the admin command "security receive"
$ sudo nvme security-recv /dev/nvme0n1 -n1 -x4096
This triggers a double completion as nvmet_req_init() fails and
nvmet_pci_epf_queue_response() is called, here iod->dma_dir is still
in the default state of "DMA_NONE" as set by default in
nvmet_pci_epf_alloc_iod(), so nvmet_pci_epf_complete_iod() is called.
Because nvmet_req_init() failed nvmet_pci_epf_complete_iod() is also
called in nvmet_pci_epf_exec_iod_work() leading to a double completion.
This not only sends two completions to the host but also corrupts the
state of the PCI NVMe target leading to kernel oops.
This patch lets nvmet_req_init() and req->execute() complete all failed
commands, and removes the double completion case in
nvmet_pci_epf_exec_iod_work() therefore fixing the edge cases where
double completions occurred.
Fixes: 0faa0fe6f90e ("nvmet: New NVMe PCI endpoint function target driver")
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Remove the unnecessary ret = -EMFILE; assignment since it is immediately
overwritten by the result of nvmet_bdev_ns_enable() The initial value
(-EMFILE) is redundant because it has no effect on the code logic or
outcome.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Correct the error log to print ctrl->io_cqes instead of incorrectly using
ctrl->io_sqes for the io cqes size check.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This commit fixes several typos and grammatical issues across various
nvme host driver files:
- correct "glace" to "glance" in a comment in apple.c
- fix "Idependent" to "Independent" in core.c
- change "unsucceesful" to "unsuccessful", "they blk-mq" to "the blk-mq",
- fix "terminaed" to "terminated" and other grammar in fc.c
- update "O's" to "0's" to clarify meaning in nvme.h
- fix a function name reference in a comment in zns.c:
*_transter_len() -> *_transfer_len().
- fix sysfs_emit() output format in pci.c (replace x%08x with 0x%08x)
These changes improve the code readability and documentation consistency
across the NVMe driver.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When restoring the default socket callbacks during a TLS handshake, we
need to acquire a write lock on sk_callback_lock. Previously, a read
lock was used, which is insufficient for modifying sk_user_data and
sk_data_ready.
Fixes: 675b453e0241 ("nvmet-tcp: enable TLS handshake upcall")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Pull block fixes from Jens Axboe:
- NVMe fixes via Christoph:
- fix incorrect cdw15 value in passthru error logging (Alok Tiwari)
- fix memory leak of bio integrity in nvmet (Dmitry Bogdanov)
- refresh visible attrs after being checked (Eugen Hristev)
- fix suspicious RCU usage warning in the multipath code (Geliang Tang)
- correctly account for namespace head reference counter (Nilay Shroff)
- Fix for a regression introduced in ublk in this cycle, where it would
attempt to queue a canceled request.
- brd RCU sleeping fix, also introduced in this cycle. Bare bones fix,
should be improved upon for the next release.
* tag 'block-6.16-20250704' of git://git.kernel.dk/linux:
brd: fix sleeping function called from invalid context in brd_insert_page()
ublk: don't queue request if the associated uring_cmd is canceled
nvme-multipath: fix suspicious RCU usage warning
nvme-pci: refresh visible attrs after being checked
nvmet: fix memory leak of bio integrity
nvme: correctly account for namespace head reference counter
nvme: Fix incorrect cdw15 value in passthru error logging
|
|
The tuple_size field in blk_integrity currently represents the total
size of metadata associated with each data interval. To make the meaning
more explicit, rename tuple_size to metadata_size. This is a purely
mechanical rename with no functional changes.
Suggested-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Link: https://lore.kernel.org/20250630090548.3317-2-anuj20.g@samsung.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
If nvmet receives commands with metadata there is a continuous memory
leak of kmalloc-128 slab or more precisely bio->bi_integrity.
Since commit bf4c89fc8797 ("block: don't call bio_uninit from bio_endio")
each user of bio_init has to use bio_uninit as well. Otherwise the bio
integrity is not getting free. Nvmet uses bio_init for inline bios.
Uninit the inline bio to complete deallocation of integrity in bio.
Fixes: bf4c89fc8797 ("block: don't call bio_uninit from bio_endio")
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Set the WZDS and DRB bits to the namespace dlfeat if the underlying
block device enables the unmap write zeroes operation, make the nvme
target device supports the unmap write zeroes command.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://lore.kernel.org/20250619111806.3546162-4-yi.zhang@huaweicloud.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pull more block updates from Jens Axboe:
- NVMe pull request via Christoph:
- TCP error handling fix (Shin'ichiro Kawasaki)
- TCP I/O stall handling fixes (Hannes Reinecke)
- fix command limits status code (Keith Busch)
- support vectored buffers also for passthrough (Pavel Begunkov)
- spelling fixes (Yi Zhang)
- MD pull request via Yu:
- fix REQ_RAHEAD and REQ_NOWAIT IO err handling for raid1/10
- fix max_write_behind setting for dm-raid
- some minor cleanups
- Integrity data direction fix and cleanup
- bcache NULL pointer fix
- Fix for loop missing write start/end handling
- Decouple hardware queues and IO threads in ublk
- Slew of ublk selftests additions and updates
* tag 'block-6.16-20250606' of git://git.kernel.dk/linux: (29 commits)
nvme: spelling fixes
nvme-tcp: fix I/O stalls on congested sockets
nvme-tcp: sanitize request list handling
nvme-tcp: remove tag set when second admin queue config fails
nvme: enable vectored registered bufs for passthrough cmds
nvme: fix implicit bool to flags conversion
nvme: fix command limits status code
selftests: ublk: kublk: improve behavior on init failure
block: flip iter directions in blk_rq_integrity_map_user()
block: drop direction param from bio_integrity_copy_user()
selftests: ublk: cover PER_IO_DAEMON in more stress tests
Documentation: ublk: document UBLK_F_PER_IO_DAEMON
selftests: ublk: add stress test for per io daemons
selftests: ublk: add functional test for per io daemons
selftests: ublk: kublk: decouple ublk_queues from ublk server threads
selftests: ublk: kublk: move per-thread data out of ublk_queue
selftests: ublk: kublk: lift queue initialization out of thread
selftests: ublk: kublk: tie sqe allocation to io instead of queue
selftests: ublk: kublk: plumb q_id in io_uring user_data
ublk: have a per-io daemon instead of a per-queue daemon
...
|
|
Fix various spelling errors in comments.
Signed-off-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The command specific status code, 0x183, was introduced in the NVMe 2.0
specification defined to "Command Size Limits Exceeded" and only ever
applied to DSM and Copy commands. Fix the name and, remove the
incorrect translation to error codes and special treatment in the
target code for it.
Fixes: 3b7c33b28a44d4 ("nvme.h: add Write Zeroes definitions")
Cc: Chaitanya Kulkarni <chaitanyak@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "hung_task: extend blocking task stacktrace dump to semaphore" from
Lance Yang enhances the hung task detector.
The detector presently dumps the blocking tasks's stack when it is
blocked on a mutex. Lance's series extends this to semaphores
- "nilfs2: improve sanity checks in dirty state propagation" from
Wentao Liang addresses a couple of minor flaws in nilfs2
- "scripts/gdb: Fixes related to lx_per_cpu()" from Illia Ostapyshyn
fixes a couple of issues in the gdb scripts
- "Support kdump with LUKS encryption by reusing LUKS volume keys" from
Coiby Xu addresses a usability problem with kdump.
When the dump device is LUKS-encrypted, the kdump kernel may not have
the keys to the encrypted filesystem. A full writeup of this is in
the series [0/N] cover letter
- "sysfs: add counters for lockups and stalls" from Max Kellermann adds
/sys/kernel/hardlockup_count and /sys/kernel/hardlockup_count and
/sys/kernel/rcu_stall_count
- "fork: Page operation cleanups in the fork code" from Pasha Tatashin
implements a number of code cleanups in fork.c
- "scripts/gdb/symbols: determine KASLR offset on s390 during early
boot" from Ilya Leoshkevich fixes some s390 issues in the gdb
scripts
* tag 'mm-nonmm-stable-2025-05-31-15-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (67 commits)
llist: make llist_add_batch() a static inline
delayacct: remove redundant code and adjust indentation
squashfs: add optional full compressed block caching
crash_dump, nvme: select CONFIGFS_FS as built-in
scripts/gdb/symbols: determine KASLR offset on s390 during early boot
scripts/gdb/symbols: factor out pagination_off()
scripts/gdb/symbols: factor out get_vmlinux()
kernel/panic.c: format kernel-doc comments
mailmap: update and consolidate Casey Connolly's name and email
nilfs2: remove wbc->for_reclaim handling
fork: define a local GFP_VMAP_STACK
fork: check charging success before zeroing stack
fork: clean-up naming of vm_stack/vm_struct variables in vmap stacks code
fork: clean-up ifdef logic around stack allocation
kernel/rcu/tree_stall: add /sys/kernel/rcu_stall_count
kernel/watchdog: add /sys/kernel/{hard,soft}lockup_count
x86/crash: make the page that stores the dm crypt keys inaccessible
x86/crash: pass dm crypt keys to kdump kernel
Revert "x86/mm: Remove unused __set_memory_prot()"
crash_dump: retrieve dm crypt keys in kdump kernel
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter:
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.
- Implement support for wildcard netdevice in netdev basechain and
flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF:
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols:
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API:
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling:
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers:
- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"
* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...
|
|
Configfs can be configured as a loadable module, which causes a link-time
failure for dm-crypt crash dump support:
crash_dump_dm_crypt.c:(.text+0x3a4): undefined reference to `config_item_init_type_name'
aarch64-linux-ld: kernel/crash_dump_dm_crypt.o: in function `configfs_dmcrypt_keys_init':
crash_dump_dm_crypt.c:(.init.text+0x90): undefined reference to `config_group_init'
aarch64-linux-ld: crash_dump_dm_crypt.c:(.init.text+0xb4): undefined reference to `configfs_register_subsystem'
aarch64-linux-ld: crash_dump_dm_crypt.c:(.init.text+0xd8): undefined reference to `configfs_unregister_subsystem'
This could be avoided with a dependency on CONFIGFS_FS=y, but the
dependency has an additional problem of causing Kconfig dependency loops
since most other uses select the symbol.
Using a simple 'select CONFIGFS_FS' here in turn fails with
CONFIG_DM_CRYPT=m, because that still only causes configfs to be a
loadable module.
The only version I found that fixes this reliably uses an additional
Kconfig symbol to ensure the 'select' actually turns on configfs as
builtin, with two additional changes to avoid dependency loops with nvme
and sysfs.
There is no compile-time dependency between configfs and sysfs, so
selecting configfs from a driver with sysfs disabled does not cause link
failures, only the default /sys/kernel/config mount point will not be
created.
Link: https://lkml.kernel.org/r/20250521160359.2132363-1-arnd@kernel.org
Fixes: 6b23858fd63b ("crash_dump: make dm crypt keys persist for the kdump kernel")
Fixes: 1fb470408497 ("nvme-loop: add configfs dependency")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Breno Leitao <leitao@debian.org>
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Coiby Xu <coxu@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All the callers of inet_addr_is_any() have a sockaddr_storage-backed
sockaddr. Avoid casts and switch prototype to the actual object being
used.
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20250521204619.2301870-1-kees@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Pull block updates from Jens Axboe:
- ublk updates:
- Add support for updating the size of a ublk instance
- Zero-copy improvements
- Auto-registering of buffers for zero-copy
- Series simplifying and improving GET_DATA and request lookup
- Series adding quiesce support
- Lots of selftests additions
- Various cleanups
- NVMe updates via Christoph:
- add per-node DMA pools and use them for PRP/SGL allocations
(Caleb Sander Mateos, Keith Busch)
- nvme-fcloop refcounting fixes (Daniel Wagner)
- support delayed removal of the multipath node and optionally
support the multipath node for private namespaces (Nilay Shroff)
- support shared CQs in the PCI endpoint target code (Wilfred
Mallawa)
- support admin-queue only authentication (Hannes Reinecke)
- use the crc32c library instead of the crypto API (Eric Biggers)
- misc cleanups (Christoph Hellwig, Marcelo Moreira, Hannes
Reinecke, Leon Romanovsky, Gustavo A. R. Silva)
- MD updates via Yu:
- Fix that normal IO can be starved by sync IO, found by mkfs on
newly created large raid5, with some clean up patches for bdev
inflight counters
- Clean up brd, getting rid of atomic kmaps and bvec poking
- Add loop driver specifically for zoned IO testing
- Eliminate blk-rq-qos calls with a static key, if not enabled
- Improve hctx locking for when a plug has IO for multiple queues
pending
- Remove block layer bouncing support, which in turn means we can
remove the per-node bounce stat as well
- Improve blk-throttle support
- Improve delay support for blk-throttle
- Improve brd discard support
- Unify IO scheduler switching. This should also fix a bunch of lockdep
warnings we've been seeing, after enabling lockdep support for queue
freezing/unfreezeing
- Add support for block write streams via FDP (flexible data placement)
on NVMe
- Add a bunch of block helpers, facilitating the removal of a bunch of
duplicated boilerplate code
- Remove obsolete BLK_MQ pci and virtio Kconfig options
- Add atomic/untorn write support to blktrace
- Various little cleanups and fixes
* tag 'for-6.16/block-20250523' of git://git.kernel.dk/linux: (186 commits)
selftests: ublk: add test for UBLK_F_QUIESCE
ublk: add feature UBLK_F_QUIESCE
selftests: ublk: add test case for UBLK_U_CMD_UPDATE_SIZE
traceevent/block: Add REQ_ATOMIC flag to block trace events
ublk: run auto buf unregisgering in same io_ring_ctx with registering
io_uring: add helper io_uring_cmd_ctx_handle()
ublk: remove io argument from ublk_auto_buf_reg_fallback()
ublk: handle ublk_set_auto_buf_reg() failure correctly in ublk_fetch()
selftests: ublk: add test for covering UBLK_AUTO_BUF_REG_FALLBACK
selftests: ublk: support UBLK_F_AUTO_BUF_REG
ublk: support UBLK_AUTO_BUF_REG_FALLBACK
ublk: register buffer to local io_uring with provided buf index via UBLK_F_AUTO_BUF_REG
ublk: prepare for supporting to register request buffer automatically
ublk: convert to refcount_t
selftests: ublk: make IO & device removal test more stressful
nvme: rename nvme_mpath_shutdown_disk to nvme_mpath_remove_disk
nvme: introduce multipath_always_on module param
nvme-multipath: introduce delayed removal of the multipath head node
nvme-pci: derive and better document max segments limits
nvme-pci: use struct_size for allocation struct nvme_dev
...
|
|
The lifetime of the fcloop_lsreq is not tight to the lifetime of the
host or target port, thus there is no need anymore to synchronize the
cleanup path anymore.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Add the missing fcloop_call_host_done calls so that the caller
frees resources when something goes wrong.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Ensure that the tgtport is not going away as long portentry has a
pointer on it.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When nvmet_fc_unregister_targetport is called by the LLDD, it's not
possible to communicate with the host, thus all pending request will not
be process. Thus explicitly free them.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When the target port is gone, the lsrsp pointer is invalid. Thus don't
call the done function anymore instead just drop the response.
This happens when the target sends a disconnect association. After this
the target starts tearing down all resources and doesn't expect any
response.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
fcloop depends on the host or the target to allocate the fcloop_lsreq
object. This means that the lifetime of the fcloop_lsreq is tied to
either the host or the target. Consequently, the host or the target must
cooperate during shutdown.
Unfortunately, this approach does not work well when the target forces a
shutdown, as there are dependencies that are difficult to resolve in a
clean way.
The simplest solution is to decouple the lifetime of the fcloop_lsreq
object by managing them directly within fcloop. Since this is not a
performance-critical path and only a small number of LS objects are used
during setup and cleanup, it does not significantly impact performance
to allocate them during normal operation.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The delete callback can be called either via the unregister function or
from the transport directly. Thus it is necessary ensure resources are
not freed multiple times.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The abort handling logic expects that the state and the fcpreq are only
accessed when holding the reqlock lock.
While at it, only handle the aborts in the abort handler.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Track the lifetime of the in-flight tfcp_req to ensure
the object is not freed too early.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Use the newly introduced fcloop_lport_lookup instead
of the open coded version.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The checks for a valid input values are mixed with the logic to insert a
newly allocated nport. Refactor the function so that first the checks
are done.
This allows to untangle the setup steps into a more linear form which
reduces the complexity of the functions.
Also start tracking lport when a lport is assigned to a nport. This
ensures, that the lport is not going away as long it is still referenced
by a nport.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The nport object has an association with the rport and lport object,
that means we can only remove an nport object from the global nport_list
after the last user of an rport or lport is gone.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
A nport object is always used in association with targerport,
remoteport, tport and rport objects. Add explicit references for any of
the associated object. This ensures that nport is not removed too early
on shutdown sequences.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Use SHASH_DESC_ON_STACK to avoid explicit allocation.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Now that a submission queue holds a reference to its completion queue,
there is no need to pass the cq argument to nvmet_req_init(), so remove
it.
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The NVMe PCI transport specification allows for completion queues to be
shared by different submission queues.
This patch allows a submission queue to keep track of the completion queue
it is using with reference counting. As such, it can be ensured that a
completion queue is not deleted while a submission queue is actively
using it.
This patch enables completion queue sharing in the pci-epf target driver.
For fabrics drivers, completion queue sharing is not enabled as it is
not possible as per the fabrics specification. However, this patch
modifies the fabrics drivers to correctly integrate the new API that
supports completion queue sharing.
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
With struct nvmet_cq now having a reference count, this patch amends the
target fabrics call chain to initialize and destroy/put a completion
queue.
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
For the PCI transport, the NVMe specification allows submission queues
to share completion queues, however, this is not supported in the
current NVMe target implementation. This is a preparatory patch to allow
for completion queue (CQ) sharing between different submission queues
(SQ).
To support queue sharing, reference counting completion queues is
required. This patch adds the refcount_t field ref to struct nvmet_cq
coupled with respective nvmet_cq_init(), nvmet_cq_get(), nvmet_cq_put(),
nvmet_cq_is_deletable() and nvmet_cq_destroy() functions.
A CQ reference count is initialized with nvmet_cq_init() when a CQ is
created. Using nvmet_cq_get(), a reference to a CQ is taken when an SQ is
created that uses the respective CQ. Similarly. when an SQ is destroyed,
the reference count to the respective CQ from the SQ being destroyed is
decremented with nvmet_cq_put(). The last reference to a CQ is dropped
on a CQ deletion using nvmet_cq_put(), which invokes nvmet_cq_destroy()
to fully cleanup after the CQ. The helper function nvmet_cq_in_use() is
used to determine if any SQs are still using the CQ pending deletion.
In which case, the CQ must not be deleted. This should protect scenarios
where a bad host may attempt to delete a CQ without first having deleted
SQ(s) using that CQ.
Additionally, this patch adds an array of struct nvmet_cq to the
nvmet_ctrl structure. This allows for the controller to keep track of CQs
as they are created and destroyed, similar to the current tracking done
for SQs. The memory for this array is freed when the controller is freed.
A struct nvmet_ctrl reference is also added to the nvmet_cq structure to
allow for CQs to be removed from the controller whilst keeping the new
API similar to the existing API for SQs.
Sample callchain with CQ refcounting for the PCI endpoint target
(pci-epf):
i. nvmet_execute_create_cq -> nvmet_pci_epf_create_cq
-> nvmet_cq_create -> nvmet_cq_init [cq refcount=1]
ii. nvmet_execute_create_sq -> nvmet_pci_epf_create_sq
-> nvmet_sq_create -> nvmet_sq_init -> nvmet_cq_get [cq refcount=2]
iii. nvmet_execute_delete_sq - > nvmet_pci_epf_delete_sq ->
-> nvmet_sq_destroy -> nvmet_cq_put [cq refcount 1]
iv. nvmet_execute_delete_cq -> nvmet_pci_epf_delete_cq
-> nvmet_cq_put [cq refcount 0]
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This patch adds a new helper function nvmet_check_io_cqid(). It is to be
used when parsing host commands for IO CQ creation/deletion and IO SQ
creation to ensure that the specified IO completion queue identifier
(CQID) is not 0 (Admin queue ID). This is a check that already occurs in
the nvmet_execute_x() functions prior to nvmet_check_cqid.
With the addition of this helper function, the CQ ID checks in the
nvmet_execute_x() function can be removed, and instead simply call
nvmet_check_io_cqid() in place of nvmet_check_cqid().
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Do not start authentication on I/O queues as it doesn't really add value,
and secure concatenation disallows it anyway. Authentication commands on
I/O queues are not aborted, so the host may still run the authentication
protocol on I/O queues.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Now that the crc32c() library function directly takes advantage of
architecture-specific optimizations, it is unnecessary to go through the
crypto API. Just use crc32c(). This is much simpler, and it improves
performance due to eliminating the crypto API overhead.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The strncpy() function is deprecated for NUL-terminated strings as
explained in the "strncpy() on NUL-terminated strings" section of
Documentation/process/deprecated.rst.
The key issues are:
- strncpy() fails to guarantee NULL-termination when source > destination
- it unnecessarily zero-pads short strings, causing performance overhead
strscpy() is the proper replacement because:
- it guarantees NULL-termination
- it avoids redundant zero-padding
- it aligns with current kernel string-copying best practice
memcpy() was rejected because:
- NQN buffers (subsysnqn/hostnqn) are treated as NULL-terminated strings:
- strcmp() usage in nvmet_host_allowed() (discovery.c)
- strscpy() to copy subsysnqn in nvmet_execute_disc_identify()
seq_buf wasn't used because:
- this is a simple fixed-size buffer copy
- there is no need for progressive string construction features
Signed-off-by: Marcelo Moreira <marcelomoreira1905@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Move the conflicting declaration to the end of the structure. Notice
that `struct nvme_loop_iod` is a flexible structure --a structure
that contains a flexible-array member.
Fix the following warning:
drivers/nvme/target/loop.c:36:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The flag NVMET_PCI_EPF_Q_IS_SQ is set but never used. Remove it.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Improve the debug message of nvmet_pci_epf_create_cq() to indicate if a
completion queue IRQ is disabled.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
There is no point in taking the controller irq_lock and calling
nvmet_pci_epf_should_raise_irq() for a completion queue which does not
have IRQ enabled (NVMET_PCI_EPF_Q_IRQ_ENABLED flag is not set).
Move the test for the NVMET_PCI_EPF_Q_IRQ_ENABLED flag out of
nvmet_pci_epf_should_raise_irq() to the top of nvmet_pci_epf_raise_irq()
to return early when no IRQ should be raised.
Also, use dev_err_ratelimited() to avoid a message storm under load when
raising IRQs is failing.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Some endpoint PCIe controllers do not support raising legacy INTX
interrupts. This support is indicated by the intx_capable field of
struct pci_epc_features. Modify nvmet_pci_epf_raise_irq() to not
automatically fallback to trying raising an INTX interrupt after an MSI
or MSI-X error if the controller does not support INTX.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The function nvmet_pci_epf_delete_cq() unconditionally calls
nvmet_pci_epf_remove_irq_vector() even for completion queues that do not
have interrupts enabled. Furthermore, for completion queues that do
have IRQ enabled, deleting and re-creating the completion queue leaves
the flag NVMET_PCI_EPF_Q_IRQ_ENABLED set, even if the completion queue
is being re-created with IRQ disabled.
Fix these issues by calling nvmet_pci_epf_remove_irq_vector() only if
NVMET_PCI_EPF_Q_IRQ_ENABLED is set and make sure to always clear that
flag.
Fixes: 0faa0fe6f90e ("nvmet: New NVMe PCI endpoint function target driver")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
After calling nvme_auth_derive_tls_psk() we need to free the resulting
psk data, as either TLS is disable (and we don't need the data anyway)
or the psk data is copied into the resulting key (and can be free, too).
Fixes: fa2e0f8bbc68 ("nvmet-tcp: support secure channel concatenation")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Suggested-by: Maurizio Lombardi <mlombard@bsdbackstore.eu>
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
