summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c
AgeCommit message (Collapse)Author
2025-05-06wifi: iwlwifi: mvm: remove nl80211 testmodeJohannes Berg
This was used in the past for NoA and/or beacon filter testing, but these days everything is tested via debugfs or special FW commands, so remove the testmode. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.751018e0ed8e.I21557a9a3d57234187f1b0b2182a1714ecc66b9a@changeid
2025-03-11wifi: iwlwifi: w/a FW SMPS mode selectionDaniel Gabay
The FW is now responsible of determining the SMPS mode. If the user disabled power save in a certain vif, we send the vif-level power command to clear out the POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK bit for that vif. But erroneously, the FW checks DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK in the device-level command to determine the SMPS mode. To W/A this, send also the device-level command when the power save of a vif changes, and disable power save if there is any vif that has power save disabled. Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308231427.7bf205efa027.I2c793ff1fc2a6779a95faaee1ded348100fd97f1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: mvm: skip short statistics window when updating EMLSRBenjamin Berg
The statistics are not synchronized with the time that we enter EMLSR. This means that we can receive the statistic notification just after having cleared the counters, causing us to immediately exit EMLSR again. Fix this by checking that most of the time for the window has passed. If that is not the case, ignore this window and wait for the next notification. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241227095718.0eb0f2044535.Ic2af92737ccfc873f3b6c228704238ebb9f983ca@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: mvm: Request periodic system statistics earlierSomashekhar(Som)
Currently driver requests periodic statistics after entering EMLSR. This means that when not in EMLSR, link selection decisions will be done based on old statistics, from the association time. Request periodic statistics already at association instead, Signed-off-by: Somashekhar(Som) <somashekhar.puttagangaiah@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241226174257.4ca59fe0e060.Ic46280aad4dc7087a7d6d0773b86c255133cb7d6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: mac80211: change disassoc sequence a bitMiri Korenblit
Currently, the sequence goes like this (among others): 1. flush all stations (including the AP ones) -> this will tell the drivers to remove the stations 2. notify the driver the vif is not associated. Which means that in between 1 and 2, the state is that the vif is associated, but there is no AP station, which makes no sense, and may be problematic for some drivers (for example iwlwifi) Change the sequence to: 1. flush the TDLS stations 2. move the AP station to IEEE80211_STA_NONE 3. notify the driver about the vif being unassociated 4. flush the AP station In order to not break other drivers, add a vif flag to indicate whether the driver wants to new sequence or not. If the flag is not set, then things will be done in the old sequence. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20241224192322.996ad1be6cb3.I7815d33415aa1d65c0120b54be7a15a45388f807@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-11-13Merge tag 'wireless-next-2024-11-13' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.13 Most likely the last -next pull request for v6.13. Most changes are in Realtek and Qualcomm drivers, otherwise not really anything noteworthy. Major changes: mac80211 * EHT 1024 aggregation size for transmissions ath12k * switch to using wiphy_lock() and remove ar->conf_mutex * firmware coredump collection support * add debugfs support for a multitude of statistics ath11k * dt: document WCN6855 hardware inputs ath9k * remove include/linux/ath9k_platform.h ath5k * Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support rtw88: * 8821au and 8812au USB adapters support rtw89 * thermal protection * firmware secure boot for WiFi 6 chip * tag 'wireless-next-2024-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (154 commits) Revert "wifi: iwlegacy: do not skip frames with bad FCS" wifi: mac80211: pass MBSSID config by reference wifi: mac80211: Support EHT 1024 aggregation size in TX net: rfkill: gpio: Add check for clk_enable() wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw() wifi: Switch back to struct platform_driver::remove() wifi: ipw2x00: libipw_rx_any(): fix bad alignment wifi: brcmfmac: release 'root' node in all execution paths wifi: iwlwifi: mvm: don't call power_update_mac in fast suspend wifi: iwlwifi: s/IWL_MVM_INVALID_STA/IWL_INVALID_STA wifi: iwlwifi: bump minimum API version in BZ/SC to 92 wifi: iwlwifi: move IWL_LMAC_*_INDEX to fw/api/context.h wifi: iwlwifi: be less noisy if the NIC is dead in S3 wifi: iwlwifi: mvm: tell iwlmei when we finished suspending wifi: iwlwifi: allow fast resume on ax200 wifi: iwlwifi: mvm: support new initiator and responder command version wifi: iwlwifi: mvm: use wiphy locked debugfs for low-latency wifi: iwlwifi: mvm: MLO scan upon channel condition degradation wifi: iwlwifi: mvm: support new versions of the wowlan APIs wifi: iwlwifi: mvm: allow always calling iwl_mvm_get_bss_vif() ... ==================== Link: https://patch.msgid.link/20241113172918.A8A11C4CEC3@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-07wifi: iwlwifi: s/IWL_MVM_INVALID_STA/IWL_INVALID_STAMiri Korenblit
This is not mvm specific Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241028135215.acb45e8c4a78.I58736fd85d82a1fe641e75037b77878854a91e50@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-11-07wifi: iwlwifi: mvm: unify link info initializationJohannes Berg
Move the link info initialization to a common function so that it can be modified more easily later. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241028135215.ab963cc90e56.Ice5cf66dec8351f8e94ca4c5b3a27e9311d0c20a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.12-rc6). Conflicts: drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c cbe84e9ad5e2 ("wifi: iwlwifi: mvm: really send iwl_txpower_constraints_cmd") 188a1bf89432 ("wifi: mac80211: re-order assigning channel in activate links") https://lore.kernel.org/all/20241028123621.7bbb131b@canb.auug.org.au/ net/mac80211/cfg.c c4382d5ca1af ("wifi: mac80211: update the right link for tx power") 8dd0498983ee ("wifi: mac80211: Fix setting txpower with emulate_chanctx") drivers/net/ethernet/intel/ice/ice_ptp_hw.h 6e58c3310622 ("ice: fix crash on probe for DPLL enabled E810 LOM") e4291b64e118 ("ice: Align E810T GPIO to other products") ebb2693f8fbd ("ice: Read SDP section from NVM for pin definitions") ac532f4f4251 ("ice: Cleanup unused declarations") https://lore.kernel.org/all/20241030120524.1ee1af18@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-25wifi: iwlwifi: mvm: don't add default link in fw restart flowEmmanuel Grumbach
When we add the vif (and its default link) in fw restart we may override the link that already exists. We take care of this but if link 0 is a valid MLO link, then we will re-create a default link on mvmvif->link[0] and we'll loose the real link we had there. In non-MLO, we need to re-create the default link upon the interface creation, this is fine. In MLO, we'll just wait for change_vif_links() to re-build the links. Fixes: bf976c814c86 ("wifi: iwlwifi: mvm: implement link change ops") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241010140328.385bfea1b2e9.I4a127312285ccb529cc95cc4edf6fbe1e0a136ad@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-25wifi: iwlwifi: mvm: really send iwl_txpower_constraints_cmdMiri Korenblit
iwl_mvm_send_ap_tx_power_constraint_cmd is a no-op if the link is not active (we need to know the band etc.) However, for the station case it will be called just before we set the link to active (by calling iwl_mvm_link_changed with the LINK_CONTEXT_MODIFY_ACTIVE bit set in the 'changed' flags and active = true), so it will end up doing nothing. Fix this by calling iwl_mvm_send_ap_tx_power_constraint_cmd before iwl_mvm_link_changed. Fixes: 6b82f4e119d1 ("wifi: iwlwifi: mvm: handle TPE advertised by AP") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241010140328.5c235fccd3f1.I2d40dea21e5547eba458565edcb4c354d094d82a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-23wifi: mac80211: re-order assigning channel in activate linksAditya Kumar Singh
The current flow in _ieee80211_set_active_links() does not align with the operational requirements of drivers that groups multiple hardware under a single wiphy. These drivers (e.g ath12k) rely on channel assignment to determine the appropriate hardware for each link. Without this, the drivers cannot correctly establish the link interface. Currently in _ieee80211_set_active_links(), after calling drv_change_vif_links() on the driver, the state of all connected stations is updated via drv_change_sta_links(). This is followed by handling keys in the links, and finally, assigning the channel to the links. Consequently, drv_change_sta_links() prompts drivers to create the station entry at their level and within their firmware. However, since channels have not yet been assigned to links at this stage, drivers have not created the necessary link interface for establishing link stations, leading to failures in activating the links. Therefore, re-order the logic so that after drv_change_vif_links() and removing the old links, channels are assigned to newly added links. Following this, the flow proceeds to station handling. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20241001085034.2745669-1-quic_adisi@quicinc.com [Johannes: fix iwlwifi to deal with the changes] Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-23wifi: iwlwifi: mvm: prepare the tx_power handling to be per-linkEmmanuel Grumbach
We still need the firmware to align Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241008072037.317f44628eb9.I3f6a735181c6c20e805b61e4f9d2056b7f90d7ea@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-23wifi: iwlwifi: mvm: Add support for prep_add_interface() callbackIlan Peer
Implement the prep_add_interface() callback, so that in case EMLSR is active and an AP or a P2P interface is do to be added, EMLSR would be blocked. Add a delayed work, so that in case that the interface was not eventually added, EMLSR would be unblocked after 5 seconds. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241008072037.3baf282d0a01.Ife0a929455cb13a95ab197ca765d8db777ff9d89@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-23wifi: mac80211: call rate_control_rate_update() for link STAJohannes Berg
In order to update the right link information, call the update rate_control_rate_update() with the right link_sta, and then pass that through to the driver's sta_rc_update() method. The software rate control still doesn't support it, but that'll be skipped by not having a rate control ref. Since it now operates on a link sta, rename the driver method. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241007144851.5851b6b5fd41.Ibdf50d96afa4b761dd9b9dfd54a1147e77a75329@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-09-03wifi: iwlwifi: mvm: tell the firmware about CSA with mode=1Emmanuel Grumbach
When we de-activate a link because it started a CSA with mode=1, we want to tell the firmware it can no longer transmit any frame for that link. The firmware will do that on its own if the CSA indication (beacon / action frame) was received on that same link, but with MLO, things got more complex and the firmware can't track cross link CSA. Tell the firmware if we de-activate a link because of CSA with mode=1 to prevent it from transmitting, even if it is only an NDP PM=1 frame that is part of the de-activation flow. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240901071542.4bef89d438d4.If7147a7a84054e67c05414c753d73f4e2e0e6e37@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: add and improve EMLSR debug infoMiri Korenblit
Add prints of the per-link MPDU counters, and change the other MPDU counters related prints to use DL_INFO, which is already used for all EMLSR tests anyway, instead of DL_STATS which pollutes the logs with all the RX signal info. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Daniel Gabay <daniel.gabay@intel.com> Link: https://patch.msgid.link/20240729201718.02bd85837c87.I85480c9c4fab0f7a574dd69cbeafd82674146921@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: add firmware debug points for EMLSR entry / exitEmmanuel Grumbach
This will help to dump the firmware logs at the right spot if needed. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240729201718.3a91e89e32f8.Ieb28d7756c47dee52c912a71abe82fa0b08b19da@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-28wifi: mac80211: remove DEAUTH_NEED_MGD_TX_PREPJohannes Berg
This flag is annoying because it puts a lot of logic into mac80211 that could just as well be in the driver (only iwlmvm uses it) and the implementation is also broken for MLO. Remove the flag in favour of calling drv_mgd_prepare_tx() without any conditions even for the deauth-while-assoc case. The drivers that implement it can take the appropriate actions, which for the only user of DEAUTH_NEED_MGD_TX_PREP (iwlmvm) is a bit more tricky than the implementation in mac80211 is anyway, and all others have no need and can just exit if info->was_assoc is set. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240627132527.94924bcc9c9e.I328a219e45f2e2724cd52e75bb9feee3bf21a463@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-10Merge tag 'wireless-next-2024-06-07' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.11 The first "new features" pull request for v6.11 with changes both in stack and in drivers. Nothing out of ordinary, except that we have two conflicts this time: net/mac80211/cfg.c https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au drivers/net/wireless/microchip/wilc1000/netdev.c https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au Major changes: cfg80211/mac80211 * parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers wilc1000 * read MAC address during probe to make it visible to user space iwlwifi * bump FW API to 91 for BZ/SC devices * report 64-bit radiotap timestamp * enable P2P low latency by default * handle Transmit Power Envelope (TPE) advertised by AP * start using guard() rtlwifi * RTL8192DU support ath12k * remove unsupported tx monitor handling * channel 2 in 6 GHz band support * Spatial Multiplexing Power Save (SMPS) in 6 GHz band support * multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) support * dynamic VLAN support * add panic handler for resetting the firmware state ath10k * add qcom,no-msa-ready-indicator Device Tree property * LED support for various chipsets * tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (194 commits) wifi: ath12k: add hw_link_id in ath12k_pdev wifi: ath12k: add panic handler wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity() wifi: brcm80211: remove unused structs wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type) wifi: ath12k: do not process consecutive RDDM event dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup() wifi: rtlwifi: handle return value of usb init TX/RX wifi: rtlwifi: Enable the new rtl8192du driver wifi: rtlwifi: Add rtl8192du/sw.c wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfg wifi: rtlwifi: Add rtl8192du/dm.{c,h} wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h} wifi: rtlwifi: Add rtl8192du/rf.{c,h} wifi: rtlwifi: Add rtl8192du/trx.{c,h} wifi: rtlwifi: Add rtl8192du/phy.{c,h} wifi: rtlwifi: Add rtl8192du/hw.{c,h} wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DU wifi: rtlwifi: Add rtl8192du/table.{c,h} ... Signed-off-by: Jakub Kicinski <kuba@kernel.org> ==================== Link: https://lore.kernel.org/r/20240607093517.41394C2BBFC@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-29wifi: iwlwifi: mvm: don't initialize csa_work twiceMiri Korenblit
The initialization of this worker moved to iwl_mvm_mac_init_mvmvif but we removed only from the pre-MLD version of the add_interface callback. Remove it also from the MLD version. Fixes: 0bcc2155983e ("wifi: iwlwifi: mvm: init vif works only once") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240512152312.4f15b41604f0.Iec912158e5a706175531d3736d77d25adf02fba4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: add debug data for MPDU countingMiri Korenblit
It is hard to debug issues of EMLSR entry/exit due to low throughput. Add debug data. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240527190228.77ef3c2654dc.I1796a3995da2a49dd5102d33766af1ad416dd60b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: handle TPE advertised by APJohannes Berg
6 GHz BSS SP client shall respect TX power limits advertised by the AP in TPE elements, send the data to the firmware using the AP_TX_POWER_CONSTRAINTS_CMD command, so do that. Co-developed-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240527190228.32f1e2e1447c.I58ac91c38585362aa42bb4a8a59c7d88e67bc40b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-23wifi: iwlwifi: mvm: add mvm-specific guardJohannes Berg
Add and use an mvm-specific guard for the mvm mutex. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240512152312.7391425b3af2.I1b109f56753dd3f35602dd2c5cf6e1e35aee313d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: fix primary link settingMiri Korenblit
mvmvif::primary link holds the ID and not a bitmap. Fix this Fixes: 07bf5297d392 ("wifi: iwlwifi: mvm: Implement new link selection algorithm") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240506095953.779bf6949053.Ia9297991ff2fdc82ae7c730e0069e2dd6e5f2902@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is activeYedidya Benshimol
When there's an active link in a non-station vif, the station vif is not allowed to enter EMLSR Note that blocking EMLSR by calling iwl_mvm_block_esr() we will schedule an exit from EMLSR worker, but the worker cannot run before the activation of the non-BSS link, as ieee80211_remain_on_channel already holds the wiphy mutex. Handle that by explicitly calling ieee80211_set_active_links() to leave EMLSR, and then doing iwl_mvm_block_esr() only for consistency and to avoid re-entering it before ready. Note that a call to ieee80211_set_active_links requires to release the mvm mutex, but that's ok since we still hold the wiphy lock. The only thing that might race here is the ESR_MODE_NOTIF, so this changes its handler to run under the wiphy lock. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.916193759f8a.Idf3a3caf5cdc3e69c81710b7ceb57e87f2de87e4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: exit EMLSR when CSA happensJohannes Berg
If CSA is happening, then exit EMLSR to keep the better link, which is the primary link unless that's doing the CSA with quiet. This is done because we can't transmit the OMN frame on a quiet link, but want to exit EMLSR during CSA for better beacon reception, so we can follow the switch accurately. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.3ffff9577f08.I2620971fa5aef789e0d4a588def4c2621e8bed5b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: Disable/enable EMLSR due to link's bandwidth/bandYedidya Benshimol
Enable EMLSR when bandwidth settings meet the criteria in both band and width, otherwise disable. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.4e473d4f7f5c.I3adf5619b60bfba8af0cd7eae9dac947419603b6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: trigger link selection upon TTLM start/endMiri Korenblit
When non default TTLM is applied, mac80211 may force us to use a specific link (For example, if the only active link becomes a dormant link, mac80211 will pick the first usable link and set it as active). When default TTLM is applied, we have new usable links that we might want to select. Therefore, trigger MLO scan and link selection upon change in TTLM. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Link: https://msgid.link/20240505091420.ed2b386566a8.I0168e61da86b2027633743aaf5d97e483991f0dc@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: Activate EMLSR based on traffic volumeMiri Korenblit
Adjust EMLSR activation to account for traffic levels. By tracking the number of RX/TX MPDUs, EMLSR will be activated only when traffic volume meets the required threshold. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.9480f99ac8fc.If9eb946e929a39e10fe5f4638bc8bc3f8976edf1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: Always allow entering EMLSR from debugfsMiri Korenblit
EMLSR can't be activated from mac80211. Except for the debugfs, which is intended for testing purposes. Currently we don't allow entering EMLSR from debugfs if EMLSR is blocked, i.e. if mvmvif::esr_disable_reason is not 0. But we need a way to activate EMLSR regardless of the vif being blocked, for testing. Remove the check of esr_disable_reason Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.bc3c24d9e0e6.Iad60e22a0d7e2b2b989051e1140b6dc98bef7bcc@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: cleanup EMLSR when BT is active handlingMiri Korenblit
BT Coex disables EMLSR only for a 2.4 GHz link, but doesn't block the vif from using EMLSR with a different link pair. In addition, storing it in mvmvif:disable_esr_reason requires extracting the BT Coex bit before checking if EMLSR is blocked or not for a specific vif. Therefore, change the BT Coex bit to be an exit reason and not a blocker. On link selection, EMLSR mode will be re-calculated for the 2.4 GHz link instead of checking that bit. While at it, move the relevant function declarations to the EMLSR functions area in mvm.h Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.a2e93b67c895.I183a0039ef076613144648cc46fbe9ab3d47c574@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: get periodic statistics in EMLSRMiri Korenblit
In EMLSR we need to track the RSSI of both links, and exit if the RSSI of one of the links got too low. For that request the FW to send statistics every 5 seconds when in EMLSR. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.6e19d596d77f.Ica2a75a031b1bced0dc2e18c5d365b5eb0d3ec07@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: don't recompute EMLSR mode in can_activate_linksMiri Korenblit
mac80211 invokes the driver callback drv_can_activate_links() from ieee80211_set_active_links to verify it can activate the desired link combination. However, ieee80211_set_active_links is called with more than one link in 2 cases: - After driver's link selection decided to enter EMLSR - From debugfs, for testing purposes. For both cases there is no need to recompute all the considerations determining whether to activate EMLSR. Instead, only check if the vif is not blocked for EMLSR. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240416134215.202cf5a9ef2c.I65e4698b730a8652ad8d1c01420aabb41a1d04fd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: init vif works only onceJohannes Berg
It's dangerous to re-initialize works repeatedly, especially delayed ones that have an associated timer, and even more so if they're not necessarily canceled inbetween. This can be the case for these workers here during FW restart scenarios, so make sure to initialize it only once. While at it, also ensure it is cancelled correctly. Fixes: f67806140220 ("iwlwifi: mvm: disconnect in case of bad channel switch parameters") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.ddf8eece5eac.I4164f5c9c444b64a9abbaab14c23858713778e35@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: Add helper functions to update EMLSR statusMiri Korenblit
There are reasons for which we need to exit EMLSR, but not to block it completely, and there are reasons for which we need to block EMLSR. For both reason types we have the enum iwl_mvm_esr_state, when the blocking reasons are stored in the `mvmvif::esr_disable_reason` bitmap. This change introduces the APIs to use in the different cases: - iwl_mvm_exit_esr - will exit from EMLSR mode. - iwl_mvm_block_esr - will update the bitmap and exit EMLSR, to be used for the blocking reasons only. - iwl_mvm_unblock_esr - will update the bitmap. To be used for the blocking reasons only. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240416134215.d54142a75876.I552926065521f5f848c37b0bd845494bd7865fb7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: Implement new link selection algorithmMiri Korenblit
Replaces the current logic with a new algorithm based on the link grading introduced in a previous patch. The new selection algorithm will be invoked upon successful scan to ensure it has the necessary updated data it needs. This update delegates the selection logic as the primary link determiner in EMLSR mode, storing it in mvmvif to avoid repeated calculations, as the result may vary. Additionally, includes tests for iwl_mvm_valid_link_pair to validate link pairs for EMLSR. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240416134215.309fb1b3fe44.I5baf0c293c89a5a28bd1a6386bf9ca6d2bf61ab8@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: move EMLSR/links codeMiri Korenblit
The functions that are link related, so they should be in link.c and not in mld-mac80211.c. Move them. Also move the different prototypes to the right place in mvm.h Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240416134215.e7c368256fa0.I6b15805a7c8a75d1814f1a829601daf4d3788731@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: check if EMLSR is allowed before selecting linksMiri Korenblit
Currenty iwl_mvm_mld_select_links() doesn't fully check that EMLSR is allowed before selecting the 2 best links. Although it will fail in ieee80211_set_active_links(), it is preferred to avoid the redundent calculations. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240416134215.3578a93feb1a.I1cd91608bb73fbe19b8dfdf90e14ce40b98c3430@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: don't always disable EMLSR due to BT coexMiri Korenblit
2.4 GHz/LB (low band) link can't be used in an EMLSR links pair when BT is on. But EMLSR is still allowed for a pair of links which none of them operates in LB. In the existing code, EMLSR will always be disabled if one of the usable links is in LB (and BT is on). Move this check to the code that verifies a specific pair of links, and only if one of these links operates on LB - disable EMLSR. Fixes: 10159a45666b ("wifi: iwlwifi: disable eSR when BT is active") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.2841006b5cc4.I45ffd583f593daa950322852ceb9454cbf497e24@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: calculate EMLSR mode after connectionMiri Korenblit
The function iwl_mvm_can_enter_esr() is (among others) calculating if EMLSR mode is disabled due to BT coex by calling iwl_mvm_bt_coex_calculate_esr_mode(), then stores the decision in mvmvif::esr_disable_reason. But there is no need to calculate this every time iwl_mvm_can_enter_esr is called. Fix this by calculating it once after authorization, and in iwl_mvm_can_enter_esr only check mvmvif::esr_disable_reason. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.a767e243366e.I3b32d36cda23f67dc103a28a9bdccb0039d22574@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: send ap_tx_power_constraints cmd to FW in AP modeMukesh Sisodiya
Send AP_TX_POWER_CONSTRAINTS_CMD with no local maximum transmit power constraint to FW and FW will update the TPE element with required tx power limits. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.b6af4ecfcfe8.I07e8db349190e0c58c468c18477d8551288ac069@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: introduce esr_disable_reasonEmmanuel Grumbach
This will maintain a bitmap of reasons for which we want to avoid enabling EMLSR. For now, we have a single reason: BT coexistence, but we will add soon more reasons. Make it a bitmap to make it easier to manage. Since we'll impact the parameters that impact the enablement / disablement of EMLSR from several places, introduce a generic function that takes into account the current state and execute the decision that must be taken. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.94c3590c6f27.I6a190da5025d0523ef483ffac0c64e26675041e6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-25wifi: iwlwifi: reconfigure TLC during HW restartJohannes Berg
Since the HW restart flow with multi-link is very similar to the initial association, we do need to reconfigure TLC there. Remove the check that prevented that. Fixes: d2d0468f60cd ("wifi: iwlwifi: mvm: configure TLC on link activation") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240320232419.a00adcfe381a.Ic798beccbb7b7d852dc976d539205353588853b0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-25wifi: iwlwifi: mvm: set wider BW OFDMA ignore correctlyJohannes Berg
Clearly, I put this flag into the wrong place: devices using the code in mac80211.c only do not support EHT, so this isn't even relevant. Fix this by moving the code to the right function. Fixes: 32a5690e9acb ("wifi: iwlwifi: mvm: support wider-bandwidth OFDMA") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240320232419.0d5fb0e971e4.I3b67c5e0ddcbe6e58143ec0bc4e40dd6dba4f863@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-25wifi: iwlwifi: mvm: fix active link counting during recoveryBenjamin Berg
During recovery, the chanctx_conf in mac80211 is still non-NULL even though the channel context has not yet been assigned again. In that case, the real count is actually lower. Switch to instead count the phy_ctx assignment and ensure that the assignment is cleared at the start of recovery. Fixes: 12bacfc2c065 ("wifi: iwlwifi: handle eSR transitions") Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240320232419.55f37339e7d1.I57006568a90ffb7a1232def1b2f3264dea711ba6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-12wifi: iwlwifi: mvm: check own capabilities for EMLSRJohannes Berg
There may be different hardware or configurations supported, so check for our own EMLSR capability before allowing it to be used, in addition to checking the AP's. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240208185302.036443611696.If33caabd7cf372834287863b40b2d6d1ef1ca3f7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: iwlwifi: mvm: remove flags for enable/disable beacon filterJohannes Berg
The flags argument to enable/disable beacon filtering functions is unused and always zero, so just remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240206175739.2c739c1034a5.I8619949ad4ebd31593d10ece371ebdc6c48db98f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: cfg80211/mac80211: move puncturing into chandefJohannes Berg
Aloka originally suggested that puncturing should be part of the chandef, so that it's treated correctly. At the time, I disagreed and it ended up not part of the chandef, but I've now realized that this was wrong. Even for clients, the RX, and perhaps more importantly, CCA configuration needs to take puncturing into account. Move puncturing into the chandef, and adjust all the code accordingly. Also add a few tests for puncturing in chandef compatibility checking. Link: https://lore.kernel.org/linux-wireless/20220214223051.3610-1-quic_alokad@quicinc.com/ Suggested-by: Aloka Dixit <quic_alokad@quicinc.com> Link: https://msgid.link/20240129194108.307183a5d2e5.I4d7fe2f126b2366c1312010e2900dfb2abffa0f6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: mac80211: introduce 'channel request'Johannes Berg
For channel contexts, mac80211 currently uses the cfg80211 chandef struct (control channel, center freq(s), width) to define towards drivers and internally how these behave. In fact, there are _two_ such structs used, where the min_def can reduce bandwidth according to the stations connected. Unfortunately, with EHT this is longer be sufficient, at least not for all hardware. EHT requires that non-AP STAs that are connected to an AP with a lower bandwidth than it (the AP) advertises (e.g. 160 MHz STA connected to 320 MHz AP) still be able to receive downlink OFDMA and respond to trigger frames for uplink OFDMA that specify the position and bandwidth for the non-AP STA relative to the channel the AP is using. Therefore, they need to be aware of this, and at least for some hardware (e.g. Intel) this awareness is in the hardware. As a result, use of the "same" channel may need to be split over two channel contexts where they differ by the AP being used. As a first step, introduce a concept of a channel request ('chanreq') for each interface, to control the context it requests. This step does nothing but reorganise the code, so that later the AP's chandef can be added to the request in order to handle the EHT case described above. Link: https://msgid.link/20240129194108.2e88e48bd2e9.I4256183debe975c5ed71621611206fdbb69ba330@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 03:30:28 +0000