Age | Commit message (Collapse) | Author |
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and wireless.
Current release - regressions:
- af_unix: allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD
Current release - new code bugs:
- eth: airoha: correct enable mask for RX queues 16-31
- veth: prevent NULL pointer dereference in veth_xdp_rcv when peer
disappears under traffic
- ipv6: move fib6_config_validate() to ip6_route_add(), prevent
invalid routes
Previous releases - regressions:
- phy: phy_caps: don't skip better duplex match on non-exact match
- dsa: b53: fix untagged traffic sent via cpu tagged with VID 0
- Revert "wifi: mwifiex: Fix HT40 bandwidth issue.", it caused
transient packet loss, exact reason not fully understood, yet
Previous releases - always broken:
- net: clear the dst when BPF is changing skb protocol (IPv4 <> IPv6)
- sched: sfq: fix a potential crash on gso_skb handling
- Bluetooth: intel: improve rx buffer posting to avoid causing issues
in the firmware
- eth: intel: i40e: make reset handling robust against multiple
requests
- eth: mlx5: ensure FW pages are always allocated on the local NUMA
node, even when device is configure to 'serve' another node
- wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850,
prevent kernel crashes
- wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()
for 3 sec if fw_stats_done is not set"
* tag 'net-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
selftests: drv-net: rss_ctx: Add test for ntuple rules targeting default RSS context
net: ethtool: Don't check if RSS context exists in case of context 0
af_unix: Allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD.
ipv6: Move fib6_config_validate() to ip6_route_add().
net: drv: netdevsim: don't napi_complete() from netpoll
net/mlx5: HWS, Add error checking to hws_bwc_rule_complex_hash_node_get()
veth: prevent NULL pointer dereference in veth_xdp_rcv
net_sched: remove qdisc_tree_flush_backlog()
net_sched: ets: fix a race in ets_qdisc_change()
net_sched: tbf: fix a race in tbf_change()
net_sched: red: fix a race in __red_change()
net_sched: prio: fix a race in prio_tune()
net_sched: sch_sfq: reject invalid perturb period
net: phy: phy_caps: Don't skip better duplex macth on non-exact match
MAINTAINERS: Update Kuniyuki Iwashima's email address.
selftests: net: add test case for NAT46 looping back dst
net: clear the dst when changing skb protocol
net/mlx5e: Fix number of lanes to UNKNOWN when using data_rate_oper
net/mlx5e: Fix leak of Geneve TLV option object
net/mlx5: HWS, make sure the uplink is the last destination
...
|
|
The changes I made in
wifi: iwlwifi: don't warn if the NIC is gone in resume
conflicted with a major rework done in this area.
The merge de-facto removed my changes.
Re-add them.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250603091754.70182-1-emmanuel.grumbach@intel.com
Fixes: 06c4b2036818 ("Merge tag 'iwlwifi-next-2025-05-15' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN, wireless, Bluetooth, and Netfilter.
Current release - regressions:
- Revert "kunit: configs: Enable CONFIG_INIT_STACK_ALL_PATTERN in
all_tests", makes kunit error out if compiler is old
- wifi: iwlwifi: mvm: fix assert on suspend
- rxrpc: fix return from none_validate_challenge()
Current release - new code bugs:
- ovpn: couple of fixes for socket cleanup and UDP-tunnel teardown
- can: kvaser_pciefd: refine error prone echo_skb_max handling logic
- fix net_devmem_bind_dmabuf() stub when DEVMEM not compiled
- eth: airoha: fixes for config / accel in bridge mode
Previous releases - regressions:
- Bluetooth: hci_qca: move the SoC type check to the right place, fix
GPIO integration
- prevent a NULL deref in rtnl_create_link() after locking changes
- fix udp gso skb_segment after pull from frag_list
- hv_netvsc: fix potential deadlock in netvsc_vf_setxdp()
Previous releases - always broken:
- netfilter:
- nf_nat: also check reverse tuple to obtain clashing entry
- nf_set_pipapo_avx2: fix initial map fill (zeroing)
- fix the helper for incremental update of packet checksums after
modifying the IP address, used by ILA and BPF
- eth:
- stmmac: prevent div by 0 when clock rate is misconfigured
- ice: fix Tx scheduler handling of XDP and changing queue count
- eth: fix support for the RGMII interface when delays configured"
* tag 'net-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
calipso: unlock rcu before returning -EAFNOSUPPORT
seg6: Fix validation of nexthop addresses
net: prevent a NULL deref in rtnl_create_link()
net: annotate data-races around cleanup_net_task
selftests: drv-net: tso: make bkg() wait for socat to quit
selftests: drv-net: tso: fix the GRE device name
selftests: drv-net: add configs for the TSO test
wireguard: device: enable threaded NAPI
netlink: specs: rt-link: decode ip6gre
netlink: specs: rt-link: add missing byte-order properties
net: wwan: mhi_wwan_mbim: use correct mux_id for multiplexing
wifi: cfg80211/mac80211: correctly parse S1G beacon optional elements
net: dsa: b53: do not touch DLL_IQQD on bcm53115
net: dsa: b53: allow RGMII for bcm63xx RGMII ports
net: dsa: b53: do not configure bcm63xx's IMP port interface
net: dsa: b53: do not enable RGMII delay on bcm63xx
net: dsa: b53: do not enable EEE on bcm63xx
net: ti: icssg-prueth: Fix swapped TX stats for MII interfaces.
selftests: netfilter: nft_nat.sh: add test for reverse clash with nat
netfilter: nf_nat: also check reverse tuple to obtain clashing entry
...
|
|
The regulatory domain information was initialized every time the
FW was loaded and the device was restarted. This was unnecessary
and useless as at this stage the wiphy channels information was
not setup yet so while the regulatory domain was set to the wiphy,
the channel information was not updated.
In case that a specific MCC was configured during FW initialization
then following updates with this MCC are ignored, and thus the
wiphy channels information is left with information not matching
the regulatory domain.
This commit moves the regulatory domain initialization to after the
operational firmware is started, i.e., after the wiphy channels were
configured and the regulatory information is needed.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250604061200.f138a7382093.I2fd8b3e99be13c2687da483e2cb1311ffb4fbfce@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
When reading the interrupt status after a FW reset handshake
timeout, read the actual value not the mask for the non-MSIX
case.
Fixes: ab606dea80c4 ("wifi: iwlwifi: pcie: add support for the reset handshake in MSI")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250604061200.87a849a55086.I2f8571aafa55aa3b936a30b938de9d260592a584@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
In case of an error during init, in_hw_restart will be set, but it will
never get cleared.
Instead, we will retry to init again, and then we will act like we are in a
restart when we are actually not.
This causes (among others) to a NULL pointer dereference when canceling
rx_omi::finished_work, that was not even initialized, because we thought
that we are in hw_restart.
Set in_hw_restart to true only if the fw is running, then we know that
FW was loaded successfully and we are not going to the retry loop.
Fixes: 7391b2a4f7db ("wifi: iwlwifi: rework firmware error handling")
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250604061200.e0040e0a4b09.Iae469a0abe6bfa3c26d8a88c066bad75c2e8f121@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
After using DEFINE_RAW_FLEX, cmd is a pointer to iwl_rxq_sync_cmd,
and not a variable containing both the command and notification.
Adjust hcmd->data and hcmd->len assignment as well.
Fixes: 7438843df8cf ("wifi: iwlwifi: mvm: Avoid -Wflex-array-member-not-at-end warning")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250604031321.2277481-2-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- randstruct: gcc-plugin: Fix attribute addition with GCC 15
- ubsan: integer-overflow: depend on BROKEN to keep this out of CI
- overflow: Introduce __DEFINE_FLEX for having no initializer
- wifi: iwlwifi: mld: Work around Clang loop unrolling bug
[ Take two after a jump scare due to some repo rewriting by 'b4' - Linus ]
* tag 'hardening-v6.16-rc1-fix1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
randstruct: gcc-plugin: Fix attribute addition
overflow: Introduce __DEFINE_FLEX for having no initializer
ubsan: integer-overflow: depend on BROKEN to keep this out of CI
wifi: iwlwifi: mld: Work around Clang loop unrolling bug
|
|
The nested loop in iwl_mld_send_proto_offload() confuses Clang into
thinking there could be a final loop iteration past the end of the
"nsc" array (which is only 4 entries). The FORTIFY checking in memcmp()
(via ipv6_addr_cmp()) notices this (due to the available bytes in the
out-of-bounds position of &nsc[4] being 0), and errors out, failing
the build. For some reason (likely due to architectural loop unrolling
configurations), this is only exposed on ARM builds currently. Due to
Clang's lack of inline tracking[1], the warning is not very helpful:
include/linux/fortify-string.h:719:4: error: call to '__read_overflow' declared with 'error' attribute: detected read beyond size of object (1st parameter)
719 | __read_overflow();
| ^
1 error generated.
But this was tracked down to iwl_mld_send_proto_offload()'s
ipv6_addr_cmp() call.
An upstream Clang bug has been filed[2] to track this. For now fix the
build by explicitly bounding the inner loop by "n_nsc", which is what
"c" is already limited to.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://github.com/ClangBuiltLinux/linux/issues/2076
Link: https://github.com/llvm/llvm-project/pull/73552 [1]
Link: https://github.com/llvm/llvm-project/issues/136603 [2]
Link: https://lore.kernel.org/r/20250421204153.work.935-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
Miri Korenblit says:
====================
iwlwifi features, notably a rework of the transport configuration
====================
Link: https://patch.msgid.link/MW5PR11MB5810DD2655DE461E98A618DDA390A@MW5PR11MB5810.namprd11.prod.outlook.com/
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In the current code, if an ROC is started on a vif that already has an
active ROC we reject it and warn.
But really there is no such limitation. The actual limitation is to not
have 2 ROCs of the same type simultaneously.
Add a helper function to find a vif that has an active ROC of a given
type, and only if one exist - reject the ROC.
This allows also to remove bss_roc_vif.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250511195137.1f8c55198578.I17cb191596ed4e97a4854108f8ca5ca197662a62@changeid
|
|
Various headers are required for these to build properly.
Include the needed files.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250511195137.956281013349.I4c537dffb82f5e5042e4a880cde3c6da38a56cbc@changeid
|
|
Context info was introduced in 22000, and was significantly changed in
ax210. The new version of context info was called 'gen3',
probably because in 22000, the gen2 transport was added.
But this name is just wrong:
- if 'gen' enumerates transports, there was not a gen3 transport, just a
few modifications to gen1/2 transports needed for ax210.
- if 'gen' enumerates devices, then we can just use the device names.
Also, context info will soon become a lib, agnostic of the transport
generations.
Simply replace 'gen3' with 'v2'.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250511195137.a580bd8d4f74.Ie413a02233f1a5ad538e13071c09760b9d97be3b@changeid
|
|
iwl_pcie_apply_destination is used in all generation.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250511195137.7eaf79a07226.I615cfd21001208b366c94a5fcb8e30a7d97f0ac2@changeid
|
|
Map iwl_context_info to the matching struct in the FW.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250511195137.a7240935006e.I75e2e13421b5dac2c1bdbd01fdfd34c38f2d3d8c@changeid
|
|
TFD_QUEUE_SIZE_MAX_GEN3 is not used, remove it.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250511195137.a0154cca6afb.Ifb4915e0acd51be6a75d33a8b96b3f7b0928b312@changeid
|
|
As those are now the same, unify and adjust the documentation.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250511195137.b7ddfade8fec.I2bf97252c4bd751077ade204767eed02d815614d@changeid
|
|
iwlagn_scd_bc_tbl is used for pre-ax210 devices,
and iwl_gen3_bc_tbl_entry is used for ax210 and on. But there is no
difference between the the 22000 version and the AX210+ one.
In order to unify the two, as first step make iwlagn_scd_bc_tbl an entry
as well, and adjust the code. In a later patch both structures will be
unified.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250511195137.645cd82ebf48.Iaa7e88179372d60ef31157e379737b5babe54012@changeid
|
|
'GEN3' here really means 'AX210'. Rename.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250511195137.b7fb5b854ded.Ib52b84c6e36e312b2eeb84a3cf71c6185fb52ee7@changeid
|
|
We have iwl_tx_cmd for devices older than 22000, iwl_tx_cmd_gen2 for
22000 devices, and iwl_tx_cmd_gen3 ax210 and up.
But the convention for all other APIs is to have the latest version
without any prefix and the older ones - with a _vX prefix,
where X is the highest version that this struct support.
The term 'gen' was introduced as the name of the (back then) new
transport, and should not be used as a device name (for that we have the
actual names: 22000, ax210, etc.)
Now as a new transport, called 'gen3', is going to be written and it can
be confused with this API.
Move iwl_tx_cmd to use the regular versioning convention.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250511195137.806e40c8f767.Ibc0e95e43a6fa6d47f72823bf804314d5db84618@changeid
|
|
This version is not used on any device. Don't support it.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
We don't need the CORES() match nor jacket (which really doesn't
even make sense to match to the RF anyway), and since the subdevice
masks we care about are contiguous, we can encode them as highest
and lowest bit set (automatically.) By encoding whether to match or
not as separate flags and taking advantage of the limited range of
the RF type, step and ID we can reduce the amount of memory needed
for the table, while also making the logic (apart perhaps from the
subdevice mask) easier to understand.
This reduces the size of the module by about 1.5KiB on x86-64.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250511195137.38a805a7c96f.Ieece00476cea6054b0827cd075eb8ba5943373df@changeid
|
|
We don't need the configs that won't end up being used, such as
the "br" config for discrete devices, remove them. Also remove
the module firmware for test chips, that's never needed.
For now keep the iwl_dr_mac_cfg even if it's unused, we'll add
platforms with it once we have their PCI IDs.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250511195137.15e2056ec40f.I75a6ce4ad0b14d2b4413615f05523a8f62f08954@changeid
|
|
Add iwl_trans_get_device_id() to extract the device ID
from the hw_id member in the iwl_trans structure.
hw_id member contains both sub-device ID and device ID,
with the device ID occupying bits 16 to 31.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250511195137.4411402701f2.I81cde20de05e3bb993977f8d4bbf90707819347f@changeid
|
|
Looks like these were never marked discrete, since they always
used the iwl_so_mac_cfg (earlier iwl_so_trans_cfg). Mark them
as discrete since they are.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
PerCI-Ready: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Tested-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250511195137.f3a75ae80f28.I79964f4426389f04798b70841a9e847be48bf9c3@changeid
|
|
Now that it's all split into MAC and RF configs, remove
the matching on MAC type and step. If we ever need to do
something based on the MAC step, we'll have to find some
new mechanism (since the MAC type is known already from
the PCI IDs table, but not the step), or just handle the
(likely small) differences in code.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250510214621.fca99a5ab315.Iae27b781221fd29845493adf2c29d9e4f7a9c33b@changeid
|
|
There are some devices that are misidentified, such as 7265-N
and Killer 1435 variants. Add their names, and for some of them
also add the PCI IDs to match at all.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250510214621.ca03a90c294e.I04d64964c664d49ab16760d754968f09c607f36a@changeid
|
|
There are a couple of variants of this, match them correctly
to their names and clean up a bit.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250510214621.d03eaad5be56.I276a09f0cad364e51ed4730ca81fbe504e61f2c7@changeid
|
|
We only need a few entries, and there don't seem to be any
such devices actually limited to 160 MHz.
Also add PCI IDs for the new Killer device on LNL platforms.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250510214621.ba2964bee671.If7aaaf10b236115e39b17d37296341de6c821069@changeid
|
|
Again some names don't actually exist, and we only need a
few entries to cover Ty (discrete) and AX211/AX411.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250510214621.8888f6798581.If332ebfc3b3f4a335a79ccee13e90f93b1ee4df7@changeid
|
|
This really only needs to be distinguished based on the
RF type, bandwidth limit and possibly diversity (JF1).
Some of the names that are defined don't even exist.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250510214621.bca83604aa92.I35301d2d8b57c072284fff7bf6682b4a9424e56c@changeid
|
|
It's OK to match with subdevice_mask as long as that doesn't
overlap the RF ID/BW limit/cores fields in that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250510214621.87cc0ad360a8.I9be361caedd7258e8e817d4100c549681396f307@changeid
|
|
We only need a few entries on top of the Killer ones.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250510214621.fa0cde465de0.I6a3f9ed9a7341e2c58c69af50a9f126992a745f2@changeid
|
|
Unify a number of Killer devices now that we no longer
need to distinguish the MAC type, and add a few more
that wouldn't have gotten the right name before.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250510214621.a16b1c2740f8.I147b97ef2c8e99451806ea0e34a9eb5bff37c326@changeid
|
|
All of these should be 160 MHz, and they can be recognised
by just the subdevice ID. Unify all the Killer/JF entries.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250510214621.a93788f159ec.I114f09a0f61849ac3b75d12d7def35be842e5b7c@changeid
|
|
These should be according to their RF type, not just use
GF unconditionally. Fix that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250510214621.4dd365eb76cd.I91f368df691a3ce6c545d9cdc44676e7883efa16@changeid
|
|
Officially, the device names have dashes ("Wireless-N"),
so add them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250510214621.4f7bbd57680f.Ida19b5e696723db5839c13341d6ca7085e8c2568@changeid
|
|
There are a couple of old names that don't actually get used.
Remove them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250510214621.1ed5fc197ba0.I52d7bb49db24523ad93ad83a89c8e846d9a43241@changeid
|
|
During link selection if the links does not meet the valid grade
criteria then add debug log instead of warning.
Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250510214621.2593268ca988.I9786126cd1078caec8587b166a7f8735300c951d@changeid
|
|
Evidently, I confused the fields here, apply_policy should
be checked for IWL_FW_INI_APPLY_POLICY_SPLIT_DUMP_RESET.
Fix that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Eilon Rinat <eilon.rinat@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250510214621.c802d5cc1312.I0cf5d74f91349499ab35eef0ebdc604961e492ef@changeid
|
|
It was decided this was supported after all, so remove
the restriction.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-15-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
add support for remain on channel on BSS vif for iwlmld.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-14-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
If one of the stages in starting a ROC failed,
the ROC will not start nor end so EMLSR will stay blocked forever.
Block EMLSR once all ROC conditions are validated and
clear EMLSR blocked reasons in mld_vif cleanup.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-13-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
This change reflects the correct ownership of aux_sta,
as it is not a property of the link but rather of the virtual interface.
Updated the initialization, cleanup and access logic for the aux_sta member
to align with its new location within iwl_mld_vif.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-12-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
The roc_activity member in the iwl_mld_vif structure was previously
set to zero during cleanup as was present in struct_group, which
incorrectly indicated ROC_ACTIVITY_HOTSPOT.
To fix this issue, remove roc_activity member from struct_group.
Notify mac80211 of ROC expiration during vif cleanup to maintain
synchronization between the driver and mac80211.
While on it, update it's type to enum iwl_roc_activity.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-11-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Update comments to accurately reflect the purpose of the
iwl_mld_cleanup_link and iwl_cleanup_mld functions.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-10-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
With all the cleanups now, we can rename the structure to
better indicate the functionality. For older devices this
isn't quite accurate, of course, but it's better to have a
name that reflects future use for maintenance.
Add some kernel-doc while at it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-9-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
For now, the WH and PE radios require the same config as
FM, so just add a #define for those instead of copying
the data. Since this is true, Sc/Dr/Br all used the same
configs for all RF types, but that's confusing, so now
use the defined WH/PE names for the correct combinations.
We can also now enable the unit test that ensures we have
no duplicate RF configs.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-8-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
The Bz configs really should be FM for the RF, so
move that around.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-7-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|