| Age | Commit message (Collapse) | Author |
|---|
|
We don't need the CORES() match nor jacket (which really doesn't
even make sense to match to the RF anyway), and since the subdevice
masks we care about are contiguous, we can encode them as highest
and lowest bit set (automatically.) By encoding whether to match or
not as separate flags and taking advantage of the limited range of
the RF type, step and ID we can reduce the amount of memory needed
for the table, while also making the logic (apart perhaps from the
subdevice mask) easier to understand.
This reduces the size of the module by about 1.5KiB on x86-64.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250511195137.38a805a7c96f.Ieece00476cea6054b0827cd075eb8ba5943373df@changeid
|
|
We don't need the configs that won't end up being used, such as
the "br" config for discrete devices, remove them. Also remove
the module firmware for test chips, that's never needed.
For now keep the iwl_dr_mac_cfg even if it's unused, we'll add
platforms with it once we have their PCI IDs.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250511195137.15e2056ec40f.I75a6ce4ad0b14d2b4413615f05523a8f62f08954@changeid
|
|
Looks like these were never marked discrete, since they always
used the iwl_so_mac_cfg (earlier iwl_so_trans_cfg). Mark them
as discrete since they are.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
PerCI-Ready: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Tested-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250511195137.f3a75ae80f28.I79964f4426389f04798b70841a9e847be48bf9c3@changeid
|
|
Now that it's all split into MAC and RF configs, remove
the matching on MAC type and step. If we ever need to do
something based on the MAC step, we'll have to find some
new mechanism (since the MAC type is known already from
the PCI IDs table, but not the step), or just handle the
(likely small) differences in code.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250510214621.fca99a5ab315.Iae27b781221fd29845493adf2c29d9e4f7a9c33b@changeid
|
|
There are some devices that are misidentified, such as 7265-N
and Killer 1435 variants. Add their names, and for some of them
also add the PCI IDs to match at all.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250510214621.ca03a90c294e.I04d64964c664d49ab16760d754968f09c607f36a@changeid
|
|
There are a couple of variants of this, match them correctly
to their names and clean up a bit.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250510214621.d03eaad5be56.I276a09f0cad364e51ed4730ca81fbe504e61f2c7@changeid
|
|
We only need a few entries, and there don't seem to be any
such devices actually limited to 160 MHz.
Also add PCI IDs for the new Killer device on LNL platforms.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250510214621.ba2964bee671.If7aaaf10b236115e39b17d37296341de6c821069@changeid
|
|
Unify a number of Killer devices now that we no longer
need to distinguish the MAC type, and add a few more
that wouldn't have gotten the right name before.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250510214621.a16b1c2740f8.I147b97ef2c8e99451806ea0e34a9eb5bff37c326@changeid
|
|
There are a couple of old names that don't actually get used.
Remove them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250510214621.1ed5fc197ba0.I52d7bb49db24523ad93ad83a89c8e846d9a43241@changeid
|
|
With all the cleanups now, we can rename the structure to
better indicate the functionality. For older devices this
isn't quite accurate, of course, but it's better to have a
name that reflects future use for maintenance.
Add some kernel-doc while at it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-9-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
For now, the WH and PE radios require the same config as
FM, so just add a #define for those instead of copying
the data. Since this is true, Sc/Dr/Br all used the same
configs for all RF types, but that's confusing, so now
use the defined WH/PE names for the correct combinations.
We can also now enable the unit test that ensures we have
no duplicate RF configs.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-8-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
The Bz configs really should be FM for the RF, so
move that around.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-7-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
This is equivalent to just the previous iwl_cfg_ma, but
really should also be used for Bz/Gf and Sc/Gf, instead
of those using EHT sizes.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-6-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Unify the HR configs to just one HR RF config. All the fields
were the same already, so this doesn't do anything.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-5-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Unify the JF configs to just one JF RF config. This can be
done because the differing fields (thermal and DCCM offsets)
won't be used for Qu MACs (and up) due to firmware support.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-4-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
This should depend on both the RF (VHT/HE/EHT support) and
the MAC (<=22000 can put multiple frames into one buffer),
so unify the config in the struct iwl_cfg to just have it
sized according to the RF, and then double it for all the
MACs starting from AX210 (So/Ty).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-3-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
In some older devices, the min/max firmware API supported by
the driver depends on the specific device, when sharing the
the same MAC (config). For most newer devices, it really is
dependent on the MAC instead, since the firmware was frozen
for certain MAC types. However, in the future we expect also
freezes for RF types there.
To handle this most generally, add an API min/max to the MAC
config and then use the narrowest range prescribed by both,
if set.
For the newer MACs since 9000, move the configuration, there
was only a freeze on MAC+RF lines so far.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-2-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
This value is never read, so it's not needed. Remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-16-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
There are a number of MAC parameters that are in the iwl_cfg
(which is the last config matched to the MAC/RF combination).
This isn't necessary, there are many more of those than MACs,
so move (most of) the data into the MAC family config struct.
Note that DCCM information remains for use by older devices,
and on 9000 series it'll be in struct iwl_cfg but be ignored
when the CRF is in a Qu/So platform.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-15-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
These are (going to be) base MAC parameters that are identical
even for different platforms with the same MAC, so rename the
structure accordingly, calling it iwl_family_base_params.
Also rename the pointer to it so the dereferencing is a bit
shorter.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-12-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
This field is always set for >= 9000 series, but then we
already check that, so it's not needed. Remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-11-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
This field is unused, remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-10-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Since 9000 series devices, the devices are split into MAC and
CRF parts. Currently, "struct iwl_cfg" reflects some MAC and
some RF parameters, but we want to clean this up and move the
MAC data to what's now "struct iwl_cfg_trans_params". As the
first step, to reflect the intent, rename this structure.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-9-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Instead of using fw_name_pre, handle the cc firmware file
name specially in iwl_drv_get_fwname_pre() for the cc MAC
type.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-6-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Add support for the TY MAC (discrete device) and GF4 RF to
the list of MAC/RF types, and use that to remove fw_name_pre
for the ax210 family devices.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-5-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
This is never used, so remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-4-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Since JF RF always uses b0 step and QuZ MAC always uses
a0 step for firmware, there's no need for these configs
that just force the steps to those values. Remove them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-3-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
This is more maintainable than the fw_name_pre prefix, and
requires fewer duplicate structs as well. Since only b0 FW
exists, override the MAC/RF steps for these devices.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-2-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
With just a handful of values in two bytes, the params are
smaller than the pointer to them. Inline them and save some
space.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-14-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
This was used for debug/bringup of 8000 devices, to be able to
unify between all 8000 devices with NVM override. However, this
is really no longer used, those are ancient devices by now, so
we can remove the logic.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250505215513.6210ac6cda09.I83cc3e68f0ed99a922d435c203fef840a28eb0de@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Since there are two bytes hole in struct iwl_dev_info, add
a subdev_mask to match with. Also, since the PCI IDs list
needs to match first, and the dev-info list is matched from
the bottom up, remove unnecessary entries.
With this, even though there are new entries from previous
changes, the overall size is slightly reduced.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250502155404.689f9b335cbe.I66f1344b6ac7aa3665696637c97fa843c2307423@changeid
|
|
In theory, this should be 12 bits, but in practice all the
values we use now fit into 8 bits, so change the mac_type to
make room in struct iwl_dev_info.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250502155404.c17d56f4ae0f.I487c8df18aa33c46aa6813bf5aebb5a23da67600@changeid
|
|
Move all the names into dev info structs and remove
the pointer from the configs.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250502155404.1538369bffde.Id430ff71f57cbb37c19ecc5b41c831e5ba9b0695@changeid
|
|
A long time ago, when transport vs. device configs were
introduced, we wanted to eventually have a list of PCI
IDs and a separate list of devices, but for simplicity
embedded the transport config in the whole config, and
it all got confusing.
Finish splitting that out. Doing so requires having more
IWL_DEV_INFO() entries, but the whole trans/cfg aliasing
goes away and the code becomes a lot simpler.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250502155404.e03f65c0f693.I076a997f800db455b575008f9488b151738ad7ec@changeid
|
|
The BW limit, cores and RF ID are matched in the subdevice ID,
so it doesn't really make sense to have both SUBDEV() match and
a match on any of those three. In particular, for Killer devices
the subdevice ID doesn't even follow the layout, so no matching
should be on those three values at all, only with SUBDEV().
Change the logic around the BW limit to have it more like all
the other things: only a bw_limit match in the dev_info, and
put the actual bandwidth into struct iwl_cfg. This duplicates a
number of those values, but that way the logic is clearer.
Add a test that checks that the three matches mentioned above
are not used in conjunction with SUBDEV(), and check that if
the bw_limit is matched, a BW limit is provided in the config.
Also check that the "Killer" devices have a SUBDEV() match.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250502155404.a185eac2736c.I87ee87300c92518a1d3296d3eda9fd4163e9085e@changeid
|
|
Add a kunit test to check that all (used) transport config structs
are not duplicated, since there's no value in having the same info
in two places in memory.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250502155404.a151af19aaba.Id57f099a899e09318c6218ed1859151f00232b41@changeid
|
|
This is the same as iwl_cfg_dr, just different by the MAC,
so no need to keep a separate config; remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250502155404.83b86e8a182b.Iec7f3027e7058005a98ff6d05cc224ab61b7c44a@changeid
|
|
The configurations for Sc, Sc2 and Sc2f are all the same,
so keep just a single config struct.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250502151751.2bab15a21306.I079987bc4a1679789bacc1078952aa90c805ffe0@changeid
|
|
This really is the same device as covered by iwl_cfg_bz,
just the discrete version. Since discrete vs integrated
is handled in the transport config, there's no need to
have both. Remove iwl_cfg_gl.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250502151751.fbb78183dc85.Ic5429009677ae1023cf1f43a655e90409a30c493@changeid
|
|
We can handle the name differently, so do that and remove
the extra config entry.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250502151751.17fc47c72232.I2cb4476b9bca6e770bd375ad6ce650553dbde0f1@changeid
|
|
This was used in some really old devices, and then got
carried forward to Qu devices, even though on those we
don't need it at all since the TX aggregation start is
offloaded to the firmware. Remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250502151751.9c2689e2ca8e.I8274b29ca64d9ef9d1e357bbe34ca3a4b97aeb7a@changeid
|
|
There are two killer configs that no longer exist,
remove the externs.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250502151751.64977630101f.I9997a72027d37249620a78091759fa44f9d32c87@changeid
|
|
These configs are the same except for the name, but we
can use a separate per-device name to override the name.
So do that, and remove the separate configs.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250502151751.a0a8ebbd473a.Iad8bff04138538a8bc9f7920077ea24a699b1ed4@changeid
|
|
Now that the fw_name_mac is no longer around and derived
from the MAC type automatically, we no longer need to have
different configurations for Qu/QuZ. Combine them. For the
killer AX1650s/i, also fix the names, there was a mixup.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250502151751.957fbb5437ce.If51ad0b2c8afaaa131208125af3bc292793613bb@changeid
|
|
Instead of having fw_name_mac in the config, derive it
from the MAC type instead.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250502151751.8dba9a2d3546.I41fa594d6a0be163444b90c1ed4b441a949d3899@changeid
|
|
Rather than having individual entries for different MAC
and RF steps, unify the entries by using fw_name_mac and
remove the now duplicated ones.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250502151751.b93f34a65822.I57b8235acb675cb6b4e97df2f4a7365f3d9bff18@changeid
|
|
This line was duplicated by mistake, remove one occurrence.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250502151751.a2601e0a08e0.Ie72fadec40e41b8197bfdae16eaa430c64a3e62d@changeid
|
|
Add device support for PeP on ScP
Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250502151751.a66928fcc82a.Icbbc7c28855f8de232cb3916901a4da3ac286117@changeid
|
|
There are the same values as JF2/JF1 respectively, and
that really matches the code names. Remove TH/TH1.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250502151751.7677cffdfae2.Idd76734c310cf5f27de43d24e71b27467ab5905a@changeid
|
|
Add the BE213 device. This is just like BE211 but with a limitation on
the bandwidth.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308231426.f02f4d7fc73b.Idaf000dd311358e3b50a511f4efc1cc720abd58b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
