summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/cfg/bz.c
AgeCommit message (Collapse)Author
2025-07-10wifi: iwlwifi: assign a FW API range for GFMiri Korenblit
GF device is frozen on API 100, so it is not allowed to use FW APIs higher than that. Make sure of that by assigning a MIN and MAX API range for GF. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250709230308.3409de06db40.I2110ee6c0a2f5ff1e16156c5875f83d7a1723857@changeid
2025-07-10wifi: iwlwifi: assign a FW API range for HRMiri Korenblit
HR device is frozen on API 100, so it is not allowed to use FW APIs higher than that. Make sure of that by assigning a MIN and MAX API range for HR. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250709230308.ea54c00de44d.I47340ecaefbf40bb0bd254485d242b7f39df85b1@changeid
2025-07-09wifi: iwlwifi: bump minimum API version in BZMiri Korenblit
Stop supporting older FWs Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250709081300.71404c289481.Iea4f3d36e18029a817ec5d6641d08ac5ee025678@changeid
2025-07-09wifi: iwlwifi: bump FW API to 102 for BZ/SC/DRMiri Korenblit
Start supporting FW API version 102 on those devices. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250709081300.da98a7b6be42.I77150bbf55eb160dbe0ef75c3e28afc053f27ec3@changeid
2025-06-25wifi: iwlwifi: bump minimum API version in BZ/SC/DRMiri Korenblit
Stop supporting older FWs. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250609211928.aeeef3290d03.I2433bfe9def643b5f4c0e77ff3cf8cd1285f5aad@changeid
2025-05-12wifi: iwlwifi: cfg: fix and clean up FM/WH device matchingJohannes Berg
We only need a few entries, and there don't seem to be any such devices actually limited to 160 MHz. Also add PCI IDs for the new Killer device on LNL platforms. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.ba2964bee671.If7aaaf10b236115e39b17d37296341de6c821069@changeid
2025-05-12wifi: iwlwifi: cfg: clean up GF device matchingJohannes Berg
Again some names don't actually exist, and we only need a few entries to cover Ty (discrete) and AX211/AX411. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.8888f6798581.If332ebfc3b3f4a335a79ccee13e90f93b1ee4df7@changeid
2025-05-12wifi: iwlwifi: cfg: clean up HR device matchingJohannes Berg
We only need a few entries on top of the Killer ones. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.fa0cde465de0.I6a3f9ed9a7341e2c58c69af50a9f126992a745f2@changeid
2025-05-10wifi: iwlwifi: cfg: add FM RF configJohannes Berg
The Bz configs really should be FM for the RF, so move that around. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250509104454.2582160-7-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-10wifi: iwlwifi: cfg: unify num_rbds configJohannes Berg
This should depend on both the RF (VHT/HE/EHT support) and the MAC (<=22000 can put multiple frames into one buffer), so unify the config in the struct iwl_cfg to just have it sized according to the RF, and then double it for all the MACs starting from AX210 (So/Ty). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250509104454.2582160-3-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-10wifi: iwlwifi: cfg: add ucode API min/max to MAC configJohannes Berg
In some older devices, the min/max firmware API supported by the driver depends on the specific device, when sharing the the same MAC (config). For most newer devices, it really is dependent on the MAC instead, since the firmware was frozen for certain MAC types. However, in the future we expect also freezes for RF types there. To handle this most generally, add an API min/max to the MAC config and then use the narrowest range prescribed by both, if set. For the newer MACs since 9000, move the configuration, there was only a freeze on MAC+RF lines so far. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250509104454.2582160-2-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: move MAC parameters to MAC dataJohannes Berg
There are a number of MAC parameters that are in the iwl_cfg (which is the last config matched to the MAC/RF combination). This isn't necessary, there are many more of those than MACs, so move (most of) the data into the MAC family config struct. Note that DCCM information remains for use by older devices, and on 9000 series it'll be in struct iwl_cfg but be ignored when the CRF is in a Qu/So platform. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-15-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: remove DCCM offsets from new devicesJohannes Berg
This is only used with old-style debug dump, which isn't supported on newer devices, so remove the data. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-14-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: remove eeprom_size from new devicesJohannes Berg
Since 22000 series, the data is read by the firmware and the driver doesn't need to know, remove the useless setting. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-13-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: rename struct iwl_base_paramsJohannes Berg
These are (going to be) base MAC parameters that are identical even for different platforms with the same MAC, so rename the structure accordingly, calling it iwl_family_base_params. Also rename the pointer to it so the dereferencing is a bit shorter. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-12-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: remove rf_id fieldJohannes Berg
This field is always set for >= 9000 series, but then we already check that, so it's not needed. Remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-11-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: remove dbgc_supported fieldJohannes Berg
This field is unused, remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-10-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: rename cfg_trans_params to mac_cfgJohannes Berg
Since 9000 series devices, the devices are split into MAC and CRF parts. Currently, "struct iwl_cfg" reflects some MAC and some RF parameters, but we want to clean this up and move the MAC data to what's now "struct iwl_cfg_trans_params". As the first step, to reflect the intent, rename this structure. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-9-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: remove nvm_hw_section_num from new devicesJohannes Berg
This value hasn't been used since unified firmware in 22000 series, so there's no need to set the value for that or newer devices. Remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-7-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: inline HT paramsJohannes Berg
With just a handful of values in two bytes, the params are smaller than the pointer to them. Inline them and save some space. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250506194102.3407967-14-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: remove 6 GHz from ht40_bandsJohannes Berg
Since there's no HT on 6 GHz, only HE, the HT capabilities are never initialized, and so the ht40_bands value is never checked for the 6 GHz band. Remove the misleading value. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250506194102.3407967-13-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-07wifi: iwlwifi: bump FW API to 99 for BZ/SC/DR devicesMiri Korenblit
Start supporting API version 99 for those devices. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250504132447.677db25ce2c7.Ie4a7a00ff3562bfed1e8ac1fb42c1382cd24a486@changeid
2025-05-06wifi: iwlwifi: cfg: finish config splitJohannes Berg
A long time ago, when transport vs. device configs were introduced, we wanted to eventually have a list of PCI IDs and a separate list of devices, but for simplicity embedded the transport config in the whole config, and it all got confusing. Finish splitting that out. Doing so requires having more IWL_DEV_INFO() entries, but the whole trans/cfg aliasing goes away and the code becomes a lot simpler. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502155404.e03f65c0f693.I076a997f800db455b575008f9488b151738ad7ec@changeid
2025-05-06wifi: iwlwifi: cfg: clean up BW limit and subdev matchingJohannes Berg
The BW limit, cores and RF ID are matched in the subdevice ID, so it doesn't really make sense to have both SUBDEV() match and a match on any of those three. In particular, for Killer devices the subdevice ID doesn't even follow the layout, so no matching should be on those three values at all, only with SUBDEV(). Change the logic around the BW limit to have it more like all the other things: only a bw_limit match in the dev_info, and put the actual bandwidth into struct iwl_cfg. This duplicates a number of those values, but that way the logic is clearer. Add a test that checks that the three matches mentioned above are not used in conjunction with SUBDEV(), and check that if the bw_limit is matched, a BW limit is provided in the config. Also check that the "Killer" devices have a SUBDEV() match. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502155404.a185eac2736c.I87ee87300c92518a1d3296d3eda9fd4163e9085e@changeid
2025-05-06wifi: iwlwifi: cfg: remove duplicated iwl_cfg_glJohannes Berg
This really is the same device as covered by iwl_cfg_bz, just the discrete version. Since discrete vs integrated is handled in the transport config, there's no need to have both. Remove iwl_cfg_gl. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.fbb78183dc85.Ic5429009677ae1023cf1f43a655e90409a30c493@changeid
2025-05-06wifi: iwlwifi: cfg: remove fw_name_macJohannes Berg
Instead of having fw_name_mac in the config, derive it from the MAC type instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.8dba9a2d3546.I41fa594d6a0be163444b90c1ed4b441a949d3899@changeid
2025-03-11wifi: iwlwifi: bump minimum API version in BZ/SC to 93Miri Korenblit
Stop supporting older FWs. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308231427.73e962ca3e6c.I942fa8cafc1791b9330ad18e2599fae11d7b3336@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: iwlwifi: bump FW API to 98 for BZ/SC/DR devicesMiri Korenblit
Start supporting API versions 97 and 98 for those devices. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308231427.55b5455795aa.I333f1e7fa31f9da1d40f668660c1e25b93ff469e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-05wifi: iwlwifi: add iwlmld sub-driverMiri Korenblit
iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: iwlwifi: cfg: separate 22000/BZ family HT paramsJohannes Berg
We're adding a new IWLMLD opmode for just BZ and later devices. If that's enabled but IWLMVM isn't, the build fails because 22000 family configs aren't built but BZ and later refer to it. Rather than trying to make some new file to build it in all cases, just copy the small struct. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250205145347.1d6186c23bee.I3c61a6c9e0db3ba6eea4dac63e1547945ad01703@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: iwlwifi: Remove unused iwl_bz_nameDr. David Alan Gilbert
iwl_bz_name[] has been unused since the resent commit 6795a37161fb ("wifi: iwlwifi: Print a specific device name.") Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20241223013202.340180-6-linux@treblig.org
2025-01-13wifi: iwlwifi: config: unify fw/pnvm MODULE_FIRMWAREJohannes Berg
All newer devices now require PNVM files, so don't list them separately but simply generate the relevant MODULE_FIRMWARE() declarations together. This simplifies the code and adds a large number of missing PVNM declarations. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241231135726.302e521e08e9.I782513432d3dcbf801e8262522ded95302548e1c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: bump FW API to 96 for BZ/SC devicesMiri Korenblit
Start supporting API version 96 for new devices. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241228223206.4028b66f4563.I5d5caf4bffeabcab72a69c2b31445e7bee4a94b6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: bump FW API to 95 for BZ/SC devicesMiri Korenblit
Start supporting API version 95 for new devices. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241226174257.d5b73c1e9e17.I121e155b0c1fdfb7fbac934bb2f84fe0e1d13ba0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-12-13wifi: iwlwifi: fix CRF name for BzEmmanuel Grumbach
We had BE201 hard coded. Look at the RF_ID and decide based on its value. Fixes: 6795a37161fb ("wifi: iwlwifi: Print a specific device name.") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241212132940.b9eebda1ca60.I36791a134ed5e538e059418eb6520761da97b44c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-11-07wifi: iwlwifi: bump minimum API version in BZ/SC to 92Miri Korenblit
Stop supporting older FWs. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241028135215.525fe67393b6.Idbb031cf68d04b7c0c2b9fbc7d79181c538994f6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-23wifi: iwlwifi: bump FW API to 94 for BZ/SC devicesMiri Korenblit
Start supporting API version 94 for those devices. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241008072037.7ddabbd42131.Ib8bd35521a317c14b3a2a2e5983cf5bca5e8718b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: bump FW API to 93 for BZ/SC devicesMiri Korenblit
Start supporting API version 93 for new devices. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20240808232017.5c9846f4c2c3.I6c825bc93aa23db302f24db5617f9b9b06042ec8@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: config: label 'gl' devices as discreteJohannes Berg
The 'gl' devices are in the bz family, but they're not, integrated, so should have their own trans config struct. Fix that, also necessitating the removal of LTR config, and while at it remove 0x2727 and 0x272D IDs that were only used for test chips. Fixes: c30a2a64788b ("wifi: iwlwifi: add a new PCI device ID for BZ device")ticket=none Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240729201718.95aed0620080.Ib9129512c95aa57acc9876bdff8b99dd41e1562c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: iwlwifi: bump FW API to 92 for BZ/SC devicesMiri Korenblit
Start supporting API version 92 for new devices. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240618194245.433cfbb6f042.I914da5bd0e2ed25148726f9fb55e7a60b895edfd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-12wifi: iwlwifi: bump minimum API version in BZ/SC to 90Miri Korenblit
Stop supporting older FWs. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240605140327.ff8477233010.Ic8c73bd6749cc5f8ab5297807bb0be9bd96a59fa@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-23wifi: iwlwifi: bump FW API to 91 for BZ/SC devicesMiri Korenblit
Start supporting API version 91 for new devices. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240512072733.27c00099e8b7.I99b4f24bba073414dd04a6e04a359c7fbba52990@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: bump FW API to 90 for BZ/SC devicesMiri Korenblit
Start supporting API version 90 for new devices. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506095953.4e4b19128b56.I2f9196191f1ea78e96e92f9db8ecb3cc9bbfd9b3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/ti/icssg/icssg_prueth.c net/mac80211/chan.c 89884459a0b9 ("wifi: mac80211: fix idle calculation with multi-link") 87f5500285fb ("wifi: mac80211: simplify ieee80211_assign_link_chanctx()") https://lore.kernel.org/all/20240422105623.7b1fbda2@canb.auug.org.au/ net/unix/garbage.c 1971d13ffa84 ("af_unix: Suppress false-positive lockdep splat for spin_lock() in __unix_gc().") 4090fa373f0e ("af_unix: Replace garbage collection algorithm.") drivers/net/ethernet/ti/icssg/icssg_prueth.c drivers/net/ethernet/ti/icssg/icssg_common.c 4dcd0e83ea1d ("net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()") e2dc7bfd677f ("net: ti: icssg-prueth: Move common functions into a separate file") No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-19Revert "wifi: iwlwifi: bump FW API to 90 for BZ/SC devices"Johannes Berg
Revert the API version bump, the kernel doesn't actually have all the code to deal with that version yet. Fixes: 653a90f6b226 ("wifi: iwlwifi: bump FW API to 90 for BZ/SC devices") Link: https://msgid.link/20240419085147.cd756fadab03.Ibccbb65be8e05b516cae1b9fb27a959662f9f51a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-25wifi: iwlwifi: Print a specific device name.Daniel Amosi
For FM and GL, the name printed on the logs was "TBD". Change that to print the accurate name. Signed-off-by: Daniel Amosi <amosi.daniel@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240320232419.6fc9ad1396ca.I207626ce5e2ada170a7c01dccf5226110d09f135@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04wifi: iwlwifi: Add missing MODULE_FIRMWARE() for *.pnvmTakashi Iwai
A few models require *.pnvm files while we don't declare them via MODULE_FIRMWARE(). This resulted in the breakage of WiFi on the system that relies on the information from modinfo (e.g. openSUSE installer image). This patch adds those missing MODULE_FIRMWARE() entries for *.pnvm files. type=feature ticket=none Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1207553 Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://msgid.link/20240228163837.4320-1-tiwai@suse.de [move to appropriate files] Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21wifi: iwlwifi: bump FW API to 90 for BZ/SC devicesMiri Korenblit
Start supporting API version 90 for new devices. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240218194912.21cf0b641f12.I2f9196191f1ea78e96e92f9db8ecb3cc9bbfd9b3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-12wifi: iwlwifi: bump FW API to 89 for AX/BZ/SC devicesMiri Korenblit
Start supporting API version 89 for new devices. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240208185302.b5d0c18c3dad.I55d5bd15638970d27b30b38e9ef47cddf6ba715e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02wifi: iwlwifi: bump FW API to 88 for AX/BZ/SC devicesMiri Korenblit
Start supporting API version 88 for new devices. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://msgid.link/20240201155157.e35556d3f956.I6543857041a33e2b35e67eecf648c9cc6972e60a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 16:22:18 +0000