summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/cfg/ax210.c
AgeCommit message (Collapse)Author
2025-07-10wifi: iwlwifi: assign a FW API range for GFMiri Korenblit
GF device is frozen on API 100, so it is not allowed to use FW APIs higher than that. Make sure of that by assigning a MIN and MAX API range for GF. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250709230308.3409de06db40.I2110ee6c0a2f5ff1e16156c5875f83d7a1723857@changeid
2025-07-10wifi: iwlwifi: assign a FW API range for HRMiri Korenblit
HR device is frozen on API 100, so it is not allowed to use FW APIs higher than that. Make sure of that by assigning a MIN and MAX API range for HR. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250709230308.ea54c00de44d.I47340ecaefbf40bb0bd254485d242b7f39df85b1@changeid
2025-07-10wifi: iwlwifi: bump minimum API version for SO/MA/TYMiri Korenblit
Stop supporting older FWs. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250709230308.64f504f3690d.Idc95ca09101e52b4980b292945abe944c24fc5d1@changeid
2025-07-10wifi: iwlwifi: assign a FW API range for JFMiri Korenblit
JF device is frozen on API 77. This prevented us from bumping the minimum FW API of SO (and get rid of older FWs). This is because SO can be combined with JF and then FW API 77 should be used. Now as we have separate FW API ranges for the mac and the crf, we can define for JF its own FW API range. This will allow bumping the minimum FW API of SO Independently. Do that now. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250709200543.1628666-3-miriam.rachel.korenblit@intel.com
2025-05-12wifi: iwlwifi: cfg: mark Ty devices as discreteJohannes Berg
Looks like these were never marked discrete, since they always used the iwl_so_mac_cfg (earlier iwl_so_trans_cfg). Mark them as discrete since they are. Signed-off-by: Johannes Berg <johannes.berg@intel.com> PerCI-Ready: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Tested-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250511195137.f3a75ae80f28.I79964f4426389f04798b70841a9e847be48bf9c3@changeid
2025-05-12wifi: iwlwifi: cfg: fix and clean up FM/WH device matchingJohannes Berg
We only need a few entries, and there don't seem to be any such devices actually limited to 160 MHz. Also add PCI IDs for the new Killer device on LNL platforms. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.ba2964bee671.If7aaaf10b236115e39b17d37296341de6c821069@changeid
2025-05-12wifi: iwlwifi: cfg: clean up GF device matchingJohannes Berg
Again some names don't actually exist, and we only need a few entries to cover Ty (discrete) and AX211/AX411. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250510214621.8888f6798581.If332ebfc3b3f4a335a79ccee13e90f93b1ee4df7@changeid
2025-05-10wifi: iwlwifi: cfg: add GF RF configJohannes Berg
This is equivalent to just the previous iwl_cfg_ma, but really should also be used for Bz/Gf and Sc/Gf, instead of those using EHT sizes. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250509104454.2582160-6-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-10wifi: iwlwifi: cfg: unify HR configsJohannes Berg
Unify the HR configs to just one HR RF config. All the fields were the same already, so this doesn't do anything. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250509104454.2582160-5-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-10wifi: iwlwifi: cfg: unify JF configsJohannes Berg
Unify the JF configs to just one JF RF config. This can be done because the differing fields (thermal and DCCM offsets) won't be used for Qu MACs (and up) due to firmware support. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250509104454.2582160-4-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-10wifi: iwlwifi: cfg: unify num_rbds configJohannes Berg
This should depend on both the RF (VHT/HE/EHT support) and the MAC (<=22000 can put multiple frames into one buffer), so unify the config in the struct iwl_cfg to just have it sized according to the RF, and then double it for all the MACs starting from AX210 (So/Ty). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250509104454.2582160-3-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-10wifi: iwlwifi: cfg: add ucode API min/max to MAC configJohannes Berg
In some older devices, the min/max firmware API supported by the driver depends on the specific device, when sharing the the same MAC (config). For most newer devices, it really is dependent on the MAC instead, since the firmware was frozen for certain MAC types. However, in the future we expect also freezes for RF types there. To handle this most generally, add an API min/max to the MAC config and then use the narrowest range prescribed by both, if set. For the newer MACs since 9000, move the configuration, there was only a freeze on MAC+RF lines so far. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250509104454.2582160-2-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: move MAC parameters to MAC dataJohannes Berg
There are a number of MAC parameters that are in the iwl_cfg (which is the last config matched to the MAC/RF combination). This isn't necessary, there are many more of those than MACs, so move (most of) the data into the MAC family config struct. Note that DCCM information remains for use by older devices, and on 9000 series it'll be in struct iwl_cfg but be ignored when the CRF is in a Qu/So platform. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-15-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: remove DCCM offsets from new devicesJohannes Berg
This is only used with old-style debug dump, which isn't supported on newer devices, so remove the data. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-14-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: remove eeprom_size from new devicesJohannes Berg
Since 22000 series, the data is read by the firmware and the driver doesn't need to know, remove the useless setting. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-13-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: rename struct iwl_base_paramsJohannes Berg
These are (going to be) base MAC parameters that are identical even for different platforms with the same MAC, so rename the structure accordingly, calling it iwl_family_base_params. Also rename the pointer to it so the dereferencing is a bit shorter. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-12-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: remove rf_id fieldJohannes Berg
This field is always set for >= 9000 series, but then we already check that, so it's not needed. Remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-11-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: remove dbgc_supported fieldJohannes Berg
This field is unused, remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-10-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: rename cfg_trans_params to mac_cfgJohannes Berg
Since 9000 series devices, the devices are split into MAC and CRF parts. Currently, "struct iwl_cfg" reflects some MAC and some RF parameters, but we want to clean this up and move the MAC data to what's now "struct iwl_cfg_trans_params". As the first step, to reflect the intent, rename this structure. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-9-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: remove nvm_hw_section_num from new devicesJohannes Berg
This value hasn't been used since unified firmware in 22000 series, so there's no need to set the value for that or newer devices. Remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-7-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: build ax210 family FW names dynamicallyJohannes Berg
Add support for the TY MAC (discrete device) and GF4 RF to the list of MAC/RF types, and use that to remove fw_name_pre for the ax210 family devices. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250508121306.1277801-5-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-09wifi: iwlwifi: cfg: inline HT paramsJohannes Berg
With just a handful of values in two bytes, the params are smaller than the pointer to them. Inline them and save some space. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250506194102.3407967-14-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-06wifi: iwlwifi: cfg: move all names out of configsJohannes Berg
Move all the names into dev info structs and remove the pointer from the configs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502155404.1538369bffde.Id430ff71f57cbb37c19ecc5b41c831e5ba9b0695@changeid
2025-05-06wifi: iwlwifi: cfg: finish config splitJohannes Berg
A long time ago, when transport vs. device configs were introduced, we wanted to eventually have a list of PCI IDs and a separate list of devices, but for simplicity embedded the transport config in the whole config, and it all got confusing. Finish splitting that out. Doing so requires having more IWL_DEV_INFO() entries, but the whole trans/cfg aliasing goes away and the code becomes a lot simpler. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502155404.e03f65c0f693.I076a997f800db455b575008f9488b151738ad7ec@changeid
2025-05-06wifi: iwlwifi: cfg: clean up BW limit and subdev matchingJohannes Berg
The BW limit, cores and RF ID are matched in the subdevice ID, so it doesn't really make sense to have both SUBDEV() match and a match on any of those three. In particular, for Killer devices the subdevice ID doesn't even follow the layout, so no matching should be on those three values at all, only with SUBDEV(). Change the logic around the BW limit to have it more like all the other things: only a bw_limit match in the dev_info, and put the actual bandwidth into struct iwl_cfg. This duplicates a number of those values, but that way the logic is clearer. Add a test that checks that the three matches mentioned above are not used in conjunction with SUBDEV(), and check that if the bw_limit is matched, a BW limit is provided in the config. Also check that the "Killer" devices have a SUBDEV() match. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502155404.a185eac2736c.I87ee87300c92518a1d3296d3eda9fd4163e9085e@changeid
2025-05-06wifi: iwlwifi: cfg: remove fw_name_macJohannes Berg
Instead of having fw_name_mac in the config, derive it from the MAC type instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.8dba9a2d3546.I41fa594d6a0be163444b90c1ed4b441a949d3899@changeid
2025-02-11wifi: iwlwifi: Remove old device dataDr. David Alan Gilbert
The last use of iwl_ax204_name[], iwl_ax221_name[] and iwl_cfg_so_a0_ms_a0 was removed by commit f473a7fd6d60 ("wifi: iwlwifi: remove devices that never came out") Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20241223013202.340180-7-linux@treblig.org
2025-01-13wifi: iwlwifi: remove Mr/Ms radioJohannes Berg
This radio never shipped, so we don't need to have it in the code. Remove the configurations and a few lines of code for it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241231135726.9f984db3efa0.I5a39ec951430e765bdea49ff150dd41af5e911f3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: config: unify fw/pnvm MODULE_FIRMWAREJohannes Berg
All newer devices now require PNVM files, so don't list them separately but simply generate the relevant MODULE_FIRMWARE() declarations together. This simplifies the code and adds a large number of missing PVNM declarations. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241231135726.302e521e08e9.I782513432d3dcbf801e8262522ded95302548e1c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-12wifi: iwlwifi: bump min API version for Qu/So devicesMiri Korenblit
Stop supporting all FWs older than the max API version. These FW versions were supported since v6.5. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240605140327.ad6d43fe9893.I96f769e7d5be3e6499d260451df781bd694a5142@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04wifi: iwlwifi: Add missing MODULE_FIRMWARE() for *.pnvmTakashi Iwai
A few models require *.pnvm files while we don't declare them via MODULE_FIRMWARE(). This resulted in the breakage of WiFi on the system that relies on the information from modinfo (e.g. openSUSE installer image). This patch adds those missing MODULE_FIRMWARE() entries for *.pnvm files. type=feature ticket=none Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1207553 Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://msgid.link/20240228163837.4320-1-tiwai@suse.de [move to appropriate files] Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-12wifi: iwlwifi: bump FW API to 89 for AX/BZ/SC devicesMiri Korenblit
Start supporting API version 89 for new devices. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240208185302.b5d0c18c3dad.I55d5bd15638970d27b30b38e9ef47cddf6ba715e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02wifi: iwlwifi: bump FW API to 88 for AX/BZ/SC devicesMiri Korenblit
Start supporting API version 88 for new devices. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://msgid.link/20240201155157.e35556d3f956.I6543857041a33e2b35e67eecf648c9cc6972e60a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26wifi: iwlwifi: bump FW API to 87 for AX/BZ/SC devicesGregory Greenman
Start supporting API version 87 for new devices. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240123200528.14cc41da34c4.Ic867f979504c60c21c8182e9adccec9ffbadfe5b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: bump FW API to 86 for AX/BZ/SC devicesGregory Greenman
Start supporting API version 86 for new devices. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231022173519.e2f720799600.I6e22188a47efe0cbb4e013259955c4019843799f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: bump FW API to 84 for AX/BZ/SC devicesGregory Greenman
Start supporting API version 84 for new devices. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230926110319.eae20f9fdc06.Ifa9be6482121ea6df364bddc96ea6a7d101366b6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: iwlwifi: remove support of A0 version of FM RFMukesh Sisodiya
Remove the support for A0 step of latest wifi-7 FM RF as it is no longer supported. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230621130444.269d55ffbc8e.I4740f32c3d95d4474a82cc153891c92b9bc465db@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: iwlwifi: bump FW API to 83 for AX/BZ/SC devicesGregory Greenman
Start supporting API version 83 for new devices. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230621130444.267a136ea57f.Iaef9f04b9655c5c1b8bdee3b89cc3361ab621bcf@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: iwlwifi: cfg: remove trailing dash from FW_PRE constantsJohannes Berg
We have the trailing dash here, but that complicates all the code. Simplify this by removing the dashes, adding them to the *_MODULE_FIRMWARE macros, and adjusting the code using this accordingly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230621130443.72240ca13b83.I1f4ed547f0964719ed98a3ef928080462d594491@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: iwlwifi: also unify Ma device configurationsJohannes Berg
Again, they're all the same except for the radio and steps, so use the new logic to unify them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230621130443.676887cc8180.I29994dec43bfb29aad5e4ab0126c06a9ea4670cb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: iwlwifi: remove support for *nJ devicesJohannes Berg
These are test chips that will never reach anyone outside of Intel, so remove support for them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230621130443.d9f4e0356ae4.If9eccc22eb500dfff8973a70a649d94af7a60841@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: iwlwifi: don't load old firmware for ax210Johannes Berg
The earliest firmware released for these products is with API version 59 (for 'ty' only), so no point trying to go back in time even further than that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230621130443.ebe02b5dbddb.I51484ebb6c89256b0e6e7f9bb24f597c4ebead67@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: iwlwifi: split 22000.c into multiple filesJohannes Berg
Split the configuration list in 22000.c into four new files, per new device family, so we don't have this huge unusable file. Yes, this duplicates a few small things, but that's still much better than what we have now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230621130443.7543603b2ee7.Ia8dd54216d341ef1ddc0531f2c9aa30d30536a5d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 04:05:08 +0000