| Age | Commit message (Collapse) | Author |
|---|
|
If ntuple filters count is modified followed by
unicast filters count using devlink then the ntuple count
set by user is ignored and all the ntuple filters are
being reallocated. Fix this by storing the ntuple count
set by user. Without this patch, say if user tries
to modify ntuple count as 8 followed by ucast filter count as 4
using devlink commands then ntuple count is being reverted to
default value 16 i.e, not retaining user set value 8.
Fixes: 39c469188b6d ("octeontx2-pf: Add ucast filter count configurability via devlink.")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1747054357-5850-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Implements tc offload support for rvu representors.
Usage example:
- Add tc rule to drop packets with vlan id 3 using port
representor(Rpf1vf0).
# tc filter add dev Rpf1vf0 protocol 802.1Q parent ffff: flower
vlan_id 3 vlan_ethtype ipv4 skip_sw action drop
- Redirect packets with vlan id 5 and IPv4 packets to eth1,
after stripping vlan header.
# tc filter add dev Rpf1vf0 ingress protocol 802.1Q flower vlan_id 5
vlan_ethtype ipv4 skip_sw action vlan pop action mirred ingress
redirect dev eth1
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adding error pointer check after calling otx2_mbox_get_rsp().
Fixes: 9917060fc30a ("octeontx2-pf: Cleanup flow rule management")
Fixes: f0a1913f8a6f ("octeontx2-pf: Add support for ethtool ntuple filters")
Fixes: 674b3e164238 ("octeontx2-pf: Add additional checks while configuring ucast/bcast/mcast rules")
Signed-off-by: Dipendra Khadka <kdipendra88@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
|
The existing method of reserving unicast filter count leads to wasted
MCAM entries if the functionality is not used or fewer entries are used.
Furthermore, the amount of MCAM entries differs amongst Octeon SoCs.
We implemented a means to adjust the UC filter count via devlink,
allowing for better use of MCAM entries across Netdev apps.
commands:
To get the current unicast filter count
# devlink dev param show pci/0002:02:00.0 name unicast_filter_count
To change/set the unicast filter count
# devlink dev param set pci/0002:02:00.0 name unicast_filter_count
value 5 cmode runtime
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Support offloading of skbedit mark action.
For example, to mark with 0x0008, with dest ip 60.60.60.2 on eth2
interface:
# tc qdisc add dev eth2 ingress
# tc filter add dev eth2 ingress protocol ip flower \
dst_ip 60.60.60.2 action skbedit mark 0x0008 skip_sw
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
queue than its PF
It is possible to add a ntuple rule which would like to direct packet to
a VF whose number of queues are greater/less than its PF's queue numbers.
For example a PF can have 2 Rx queues but a VF created on that PF can have
8 Rx queues. As of today, ntuple rule will reject rule because it is
checking the requested queue number against PF's number of Rx queues.
As a part of this fix if the action of a ntuple rule is to move a packet
to a VF's queue then the check is removed. Also, a debug information is
printed to aware user that it is user's responsibility to cross check if
the requested queue number on that VF is a valid one.
Fixes: f0a1913f8a6f ("octeontx2-pf: Add support for ethtool ntuple filters")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231121165624.3664182-1-sumang@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As of today, hardware does not support installing tc filter
rules based on priority. This patch adds support to install
the hardware rules based on priority. The final hardware rules
will not be dependent on rule installation order, it will be strictly
priority based, same as software.
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230721043925.2627806-1-sumang@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Due to hardware limitation, MCAM drop rule with
ether_type == 802.1Q and vlan_id == 0 is not supported. Hence rejecting
such rules.
Fixes: dce677da57c0 ("octeontx2-pf: Add vlan-etype to ntuple filters")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Link: https://lore.kernel.org/r/20230710103027.2244139-1-sumang@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix the typo/copy-paste error by replacing struct variable ah_esp_mask name
by ah_esp_hdr.
Issue identified using doublebitand.cocci Coccinelle semantic patch.
Fixes: b7cf966126eb ("octeontx2-pf: Add flow classification using IP next level protocol")
Link: https://lore.kernel.org/all/20210111112537.3277-1-naveenm@marvell.com/
Signed-off-by: Deepak R Varma <drv@mailo.com>
Link: https://lore.kernel.org/r/Y/YYkKddeHOt80cO@ubun2204.myguest.virtualbox.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
1. Added support to filter packets based on IP fragment.
For IPv4 packets check for ip_flag == 0x20 (more fragment bit set).
For IPv6 packets check for next_header == 0x2c (next_header set to
'fragment header for IPv6')
2. Added configuration support from both "ethtool ntuple" and "tc flower".
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
1. If a profile does not support DMAC extraction then avoid installing NPC
flow rules for unicast. Similarly, if LXMB(L2 and L3) extraction is not
supported by the profile then avoid installing broadcast and multicast
rules.
2. Allow MCAM entry insertion for promiscuous mode.
3. For the profiles where DMAC is not extracted in MKEX key default
unicast entry installed by AF is not valid. Hence do not use action
from the AF installed default unicast entry for such cases.
4. Adjacent packet header fields in a packet like IP header source
and destination addresses or UDP/TCP header source port and destination
can be extracted together in MKEX profile. Therefore MKEX profile can be
configured to in two ways:
a. Total of 4 bytes from start of UDP header(src port
+ destination port)
or
b. Two bytes from start and two bytes from offset 2
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://lore.kernel.org/r/20221118053329.2288486-1-sumang@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
NPC exact match table can support more entries than RPM
dmac filters. This requires field size of DMAC filter count
and index to be increased.
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 2ef8e39f58f08589ab035223c2687830c0eba30f, reversing
changes made to e7ce9fc9ad38773b660ef663ae98df4f93cb6a37.
There are build warnings here which break the normal
build due to -Werror. Ratheesh was nice enough to quickly
follow up with fixes but didn't hit all the warnings I
see on GCC 12 so to unlock net-next from taking patches
let get this series out for now.
Link: https://lore.kernel.org/r/20220707013201.1372433-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
NPC exact match table can support more entries than RPM
dmac filters. This requires field size of DMAC filter count
and index to be increased.
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In some places, octeontx2 code calls bitmap_weight() to check if any bit of
a given bitmap is set. It's better to use bitmap_empty() in that case
because bitmap_empty() stops traversing the bitmap as soon as it finds
first set bit, while bitmap_weight() counts all bits unconditionally.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
Data centric bridging designed to eliminate packet loss due to
queue overflow by adding enhancements to ethernet network such as
proprity flow control etc. This patch adds support for management
of Priority flow control(PFC) on Octeontx2 and CN10K interfaces.
To enable PFC for all priorities
dcb pfc set dev eth0 prio-pfc all:on/off
To enable PFC on selected priorites
dcb pfc set dev eth0 prio-pfc 0:on/off 1:on/off ..7:on/off
With the ntuple commands user can map Priority to receive queues.
On queue overflow NIX will assert backpressure such that PFC pause frames
are genarated with mapped priority.
To map priority 7 to Queue 1
ethtool -U eth0 flow-type ether dst xx:xx:xx:xx:xx:xx vlan 0xe00a
m 0x1fff queue 1
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
NPC extraction profile marks layer types
NPC_LT_LB_CTAG for CTAG and NPC_LT_LB_STAG_QINQ for
STAG after parsing input packet. Those layer types
can be used to install ntuple filters using
vlan-etype option. Below are the commands and
corresponding behavior with this patch in place.
> alias nt "ethtool -U eth0 flow-type ether"
> nt vlan 5 m 0xf000 action 0
Input packets with outer VLAN id as 5 i.e,
stag packets with VLAN id 5 and ctag packets with
VLAN id as 5 are hit.
> nt vlan-etype 0x8100 action 0
All input ctag packets with any VLAN id are hit.
> nt vlan-etype 0x88A8 action 0
All input stag packets with any VLAN id are hit.
> nt vlan-etype 0x8100 vlan 5 m 0xf000 action 0
All input ctag packets with VLAN id 5 are hit.
> nt vlan-etype 0x88A8 vlan 5 m 0xf000 action 0
All input stag packets with VLAN id 5 are hit.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fixed inconsistent license text across the netdev
drivers.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Otherthan setting action as RSS in NPC MCAM entry, RSS flowkey
algorithm index also needs to be set. Otherwise whatever algorithm
is defined at flowkey index '0' will be considered by HW and pkt
flows will be distributed as such.
Fix this by saving the flowkey index sent by admin function while
initializing RSS and then use it when framing MCAM rules.
Fixes: 81a4362016e7 ("octeontx2-pf: Add RSS multi group support")
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch ensures that mcam flows are allocated
before adding or destroying the flows.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
VLAN TCI is a 16 bit field which includes Priority(3 bits),
CFI(1 bit) and VID(12 bits). Currently ntuple filters support
installing rules to steer packets based on VID only.
This patch extends that support such that filters can
be installed for entire VLAN TCI.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Added support for setting or modifying MCAM entry count at
runtime via devlink params.
commands:
devlink dev param show
pci/0002:02:00.0:
name mcam_count type driver-specific
values:
cmode runtime value 16
devlink dev param set pci/0002:02:00.0 name mcam_count
value 64 cmode runtime
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Variables used for TC flow management like maximum number
of flows, number of flows installed etc are a copy of ntuple
flow management variables. Since both TC and NTUPLE are not
supported at the same time, it's better to unify these with
common variables.
This patch addresses this unification and also does cleanup of
other minor stuff wrt TC.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Per single mailbox request a maximum of 256 MCAM entries
can be allocated. If more than 256 are being allocated, then
the mcam indices in the final list could get jumbled. Hence
sort the indices.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add packet flow classification support for both LMAC mapped virtual
functions and loopback VFs. This patch adds supports for ntuple
offload feature.
Signed-off-by: Rakesh Babu <rsaladi2@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
DMAC filtering can be achieved by either NPC MCAM rules or
CGX/RPM MAC filters. Currently we are achieving this by NPC
MCAM rules. This patch offloads DMAC filters to CGX/RPM MAC
filters instead of NPC MCAM rules. Offloading DMAC filter to
CGX/RPM block helps in reducing traffic to NPC block and
save MCAM rules
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Current MCAM allocation scheme allocates a single lot of
MCAM entries for ntuple filters, unicast filters and VF VLAN
rules. This patch attempts to cleanup this logic by segregating
MCAM rule allocation and management for Ntuple rules and unicast,
VF VLAN rules. This segregation will result in reusing most of
the logic for supporting ntuple filters for VF devices.
Also added debug messages for MCAM entry allocation failures.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20210528202225.GA39855@embeddedor
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the ETHTOOL_GRXCLSRLALL ioctl ethtool uses
below structure to read number of rules from the driver.
struct ethtool_rxnfc {
__u32 cmd;
__u32 flow_type;
__u64 data;
struct ethtool_rx_flow_spec fs;
union {
__u32 rule_cnt;
__u32 rss_context;
};
__u32 rule_locs[0];
};
Driver must not modify rule_cnt member. But currently driver
modifies it by modifying rss_context. Hence fix it by using a
local variable.
Fixes: 81a4362016e7 ("octeontx2-pf: Add RSS multi group support")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds support for tc flower hardware offload on ingress
traffic. Since the tc-flower filter rules use the same set of MCAM
rules as the n-tuple filters, the n-tuple filters and tc flower
rules are mutually exclusive. When one of the feature is enabled
using ethtool, the other feature is disabled in the driver. By default
the driver enables n-tuple filters during initialization.
The following flow keys are supported.
-> Ethernet: dst_mac
-> L2 proto: all protocols
-> VLAN (802.1q): vlan_id/vlan_prio
-> IPv4: dst_ip/src_ip/ip_proto{tcp|udp|sctp|icmp}/ip_tos
-> IPv6: ip_proto{icmpv6}
-> L4(tcp/udp/sctp): dst_port/src_port
The following flow actions are supported.
-> drop
-> accept
-> redirect
-> vlan pop
The flow action supports multiple actions when vlan pop is specified
as the first action. The redirect action supports redirecting to the
PF/VF of same PCI device. Redirecting to other PCI NIX devices is not
supported.
Example #1: Add a tc filter rule to drop UDP traffic with dest port 80
# ethtool -K eth0 hw-tc-offload on
# tc qdisc add dev eth0 ingress
# tc filter add dev eth0 protocol ip parent ffff: flower ip_proto \
udp dst_port 80 action drop
Example #2: Add a tc filter rule to redirect ingress traffic on eth0
with vlan id 3 to eth6 (ex: eth0 vf0) after stripping the vlan hdr.
# ethtool -K eth0 hw-tc-offload on
# tc qdisc add dev eth0 ingress
# tc filter add dev eth0 parent ffff: protocol 802.1Q flower \
vlan_id 3 vlan_ethtype ipv4 action vlan pop action mirred \
ingress redirect dev eth6
Example #3: List the ingress filter rules
# tc -s filter show dev eth4 ingress
Example #4: Delete tc flower filter rule with handle 0x1
# tc filter del dev eth0 ingress protocol ip pref 49152 \
handle 1 flower
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for programming the HW MCAM match key with IP tos, IP(v6)
proto icmp/icmpv6, allowing flow offload rules to be installed using
those fields. The NPC HW extracts layer type, which will be used as a
matching criteria for different IP protocols.
The ethtool n-tuple filter logic has been updated to parse the IP tos
and l4proto for HW offloading. l4proto tcp/udp/sctp/ah/esp/icmp are
supported. See example usage below.
Ex: Redirect l4proto icmp to vf 0 queue 0
ethtool -U eth0 flow-type ip4 l4proto 1 action vf 0 queue 0
Ex: Redirect flow with ip tos 8 to vf 0 queue 0
ethtool -U eth0 flow-type ip4 tos 8 vf 0 queue 0
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix misspellings of "physical".
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20210127181359.3008316-1-helgaas@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds support to install flow rules using ipv4 proto or
ipv6 next header field to distinguish between tcp/udp/sctp/esp/ah
flows when user doesn't specify the other match creteria related to
the flow such as tcp/udp/sctp source port and destination port, ah/esp
spi value. This is achieved by matching the layer type extracted by
NPC HW into the search key. Modified the driver to use Ethertype as
match criteria when user doesn't specify source IP address and dest
IP address. The esp/ah flow rule matching using security parameter
index (spi) is not supported as of now since the field is not extracted
into MCAM search key. Modified npc_check_field function to return bool.
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Link: https://lore.kernel.org/r/20210111112537.3277-1-naveenm@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Hardware supports 8 RSS groups per interface. Currently we are using
only group '0'. This patch allows user to create new RSS groups/contexts
and use the same as destination for flow steering rules.
usage:
To steer the traffic to RQ 2,3
ethtool -X eth0 weight 0 0 1 1 context new
(It will print the allocated context id number)
New RSS context is 1
ethtool -N eth0 flow-type tcp4 dst-port 80 context 1 loc 1
To delete the context
ethtool -X eth0 context 1 delete
When an RSS context is removed, the active classification
rules using this context are also removed.
Change-log:
v4
- Fixed compiletime warning.
- Address Saeed's comments on v3.
v3
- Coverted otx2_set_rxfh() to use new function.
v2
- Removed unrelated whitespace
- Coverted otx2_get_rxfh() to use new function.
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds support for ndo_set_vf_mac, ndo_set_vf_vlan
and ndo_get_vf_config handlers. The traffic redirection
based on the VF mac address or vlan id is done by installing
MCAM rules. Reserved RX_VTAG_TYPE7 in each NIXLF for VF VLAN
which strips the VLAN tag from ingress VLAN traffic. The NIX PF
allocates two MCAM entries for VF VLAN feature, one used for
ingress VTAG strip and another entry for egress VTAG insertion.
This patch also updates the MAC address in PF installed VF VLAN
rule upon receiving nix_lf_start_rx mbox request for VF since
Administrative Function driver will assign a valid MAC addr
in nix_lf_start_rx function.
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Co-developed-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch implements egress VLAN offload by appending NIX_SEND_EXT_S
header to NIX_SEND_HDR_S. The VLAN TCI information is specified
in the NIX_SEND_EXT_S. The VLAN offload in the ingress path is
implemented by configuring the NIX_RX_VTAG_ACTION_S to strip and
capture the outer vlan fields. The NIX PF allocates one MCAM entry
for Rx VLAN offload.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add unicast MAC address filtering support using install flow
message. Total of 8 MCAM entries are allocated for adding
unicast mac filtering rules. If the MCAM allocation fails,
the unicast filtering support will not be advertised.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds support for adding and deleting ethtool ntuple
filters. The filters for ether, ipv4, ipv6, tcp, udp and sctp
are supported. The mask is also supported. The supported actions
are drop and direct to a queue. Additionally we support FLOW_EXT
field vlan_tci and FLOW_MAC_EXT.
The NIX PF will allocate total 32 MCAM entries for the use of
ethtool ntuple filters. The Administrative Function(AF) will
install/delete the MCAM rules when NIX PF sends mailbox message
to install/delete the ntuple filters.
Ethtool ntuple filters support is restricted to PFs as of now
and PF can install ntuple filters to direct the traffic to its
VFs. Hence added a separate callback for VFs to get/set RSS
configuration.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
