summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/marvell
AgeCommit message (Collapse)Author
26 hoursMerge tag 'net-next-6.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Wrap datapath globals into net_aligned_data, to avoid false sharing - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container) - Add SO_INQ and SCM_INQ support to AF_UNIX - Add SIOCINQ support to AF_VSOCK - Add TCP_MAXSEG sockopt to MPTCP - Add IPv6 force_forwarding sysctl to enable forwarding per interface - Make TCP validation of whether packet fully fits in the receive window and the rcv_buf more strict. With increased use of HW aggregation a single "packet" can be multiple 100s of kB - Add MSG_MORE flag to optimize large TCP transmissions via sockmap, improves latency up to 33% for sockmap users - Convert TCP send queue handling from tasklet to BH workque - Improve BPF iteration over TCP sockets to see each socket exactly once - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code - Support enabling kernel threads for NAPI processing on per-NAPI instance basis rather than a whole device. Fully stop the kernel NAPI thread when threaded NAPI gets disabled. Previously thread would stick around until ifdown due to tricky synchronization - Allow multicast routing to take effect on locally-generated packets - Add output interface argument for End.X in segment routing - MCTP: add support for gateway routing, improve bind() handling - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink - Add a new neighbor flag ("extern_valid"), which cedes refresh responsibilities to userspace. This is needed for EVPN multi-homing where a neighbor entry for a multi-homed host needs to be synced across all the VTEPs among which the host is multi-homed - Support NUD_PERMANENT for proxy neighbor entries - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM - Add sequence numbers to netconsole messages. Unregister netconsole's console when all net targets are removed. Code refactoring. Add a number of selftests - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol should be used for an inbound SA lookup - Support inspecting ref_tracker state via DebugFS - Don't force bonding advertisement frames tx to ~333 ms boundaries. Add broadcast_neighbor option to send ARP/ND on all bonded links - Allow providing upcall pid for the 'execute' command in openvswitch - Remove DCCP support from Netfilter's conntrack - Disallow multiple packet duplications in the queuing layer - Prevent use of deprecated iptables code on PREEMPT_RT Driver API: - Support RSS and hashing configuration over ethtool Netlink - Add dedicated ethtool callbacks for getting and setting hashing fields - Add support for power budget evaluation strategy in PSE / Power-over-Ethernet. Generate Netlink events for overcurrent etc - Support DPLL phase offset monitoring across all device inputs. Support providing clock reference and SYNC over separate DPLL inputs - Support traffic classes in devlink rate API for bandwidth management - Remove rtnl_lock dependency from UDP tunnel port configuration Device drivers: - Add a new Broadcom driver for 800G Ethernet (bnge) - Add a standalone driver for Microchip ZL3073x DPLL - Remove IBM's NETIUCV device driver - Ethernet high-speed NICs: - Broadcom (bnxt): - support zero-copy Tx of DMABUF memory - take page size into account for page pool recycling rings - Intel (100G, ice, idpf): - idpf: XDP and AF_XDP support preparations - idpf: add flow steering - add link_down_events statistic - clean up the TSPLL code - preparations for live VM migration - nVidia/Mellanox: - support zero-copy Rx/Tx interfaces (DMABUF and io_uring) - optimize context memory usage for matchers - expose serial numbers in devlink info - support PCIe congestion metrics - Meta (fbnic): - add 25G, 50G, and 100G link modes to phylink - support dumping FW logs - Marvell/Cavium: - support for CN20K generation of the Octeon chips - Amazon: - add HW clock (without timestamping, just hypervisor time access) - Ethernet virtual: - VirtIO net: - support segmentation of UDP-tunnel-encapsulated packets - Google (gve): - support packet timestamping and clock synchronization - Microsoft vNIC: - add handler for device-originated servicing events - allow dynamic MSI-X vector allocation - support Tx bandwidth clamping - Ethernet NICs consumer, and embedded: - AMD: - amd-xgbe: hardware timestamping and PTP clock support - Broadcom integrated MACs (bcmgenet, bcmasp): - use napi_complete_done() return value to support NAPI polling - add support for re-starting auto-negotiation - Broadcom switches (b53): - support BCM5325 switches - add bcm63xx EPHY power control - Synopsys (stmmac): - lots of code refactoring and cleanups - TI: - icssg-prueth: read firmware-names from device tree - icssg: PRP offload support - Microchip: - lan78xx: convert to PHYLINK for improved PHY and MAC management - ksz: add KSZ8463 switch support - Intel: - support similar queue priority scheme in multi-queue and time-sensitive networking (taprio) - support packet pre-emption in both - RealTek (r8169): - enable EEE at 5Gbps on RTL8126 - Airoha: - add PPPoE offload support - MDIO bus controller for Airoha AN7583 - Ethernet PHYs: - support for the IPQ5018 internal GE PHY - micrel KSZ9477 switch-integrated PHYs: - add MDI/MDI-X control support - add RX error counters - add cable test support - add Signal Quality Indicator (SQI) reporting - dp83tg720: improve reset handling and reduce link recovery time - support bcm54811 (and its MII-Lite interface type) - air_en8811h: support resume/suspend - support PHY counters for QCA807x and QCA808x - support WoL for QCA807x - CAN drivers: - rcar_canfd: support for Transceiver Delay Compensation - kvaser: report FW versions via devlink dev info - WiFi: - extended regulatory info support (6 GHz) - add statistics and beacon monitor for Multi-Link Operation (MLO) - support S1G aggregation, improve S1G support - add Radio Measurement action fields - support per-radio RTS threshold - some work around how FIPS affects wifi, which was wrong (RC4 is used by TKIP, not only WEP) - improvements for unsolicited probe response handling - WiFi drivers: - RealTek (rtw88): - IBSS mode for SDIO devices - RealTek (rtw89): - BT coexistence for MLO/WiFi7 - concurrent station + P2P support - support for USB devices RTL8851BU/RTL8852BU - Intel (iwlwifi): - use embedded PNVM in (to be released) FW images to fix compatibility issues - many cleanups (unused FW APIs, PCIe code, WoWLAN) - some FIPS interoperability - MediaTek (mt76): - firmware recovery improvements - more MLO work - Qualcomm/Atheros (ath12k): - fix scan on multi-radio devices - more EHT/Wi-Fi 7 features - encapsulation/decapsulation offload - Broadcom (brcm80211): - support SDIO 43751 device - Bluetooth: - hci_event: add support for handling LE BIG Sync Lost event - ISO: add socket option to report packet seqnum via CMSG - ISO: support SCM_TIMESTAMPING for ISO TS - Bluetooth drivers: - intel_pcie: support Function Level Reset - nxpuart: add support for 4M baudrate - nxpuart: implement powerup sequence, reset, FW dump, and FW loading" * tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits) dpll: zl3073x: Fix build failure selftests: bpf: fix legacy netfilter options ipv6: annotate data-races around rt->fib6_nsiblings ipv6: fix possible infinite loop in fib6_info_uses_dev() ipv6: prevent infinite loop in rt6_nlmsg_size() ipv6: add a retry logic in net6_rt_notify() vrf: Drop existing dst reference in vrf_ip6_input_dst net/sched: taprio: align entry index attr validation with mqprio net: fsl_pq_mdio: use dev_err_probe selftests: rtnetlink.sh: remove esp4_offload after test vsock: remove unnecessary null check in vsock_getname() igb: xsk: solve negative overflow of nb_pkts in zerocopy mode stmmac: xsk: fix negative overflow of budget in zerocopy mode dt-bindings: ieee802154: Convert at86rf230.txt yaml format net: dsa: microchip: Disable PTP function of KSZ8463 net: dsa: microchip: Setup fiber ports for KSZ8463 net: dsa: microchip: Write switch MAC address differently for KSZ8463 net: dsa: microchip: Use different registers for KSZ8463 net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver dt-bindings: net: dsa: microchip: Add KSZ8463 switch support ...
6 daysocteontx2-af: use unsigned int as iterator for unsigned valuesSimon Horman
The local variable i is used to iterate over unsigned values. The lower bound of the loop is set to 0. While the upper bound is cgx->lmac_count, where they lmac_count is an u8. So the theoretical upper bound is 255. As is, GCC can't see this range of values and warns that a formatted string, which includes the %d representation of i, may overflow the buffer provided. GCC 15.1.0 says: .../cgx.c: In function 'cgx_lmac_init': .../cgx.c:1737:49: warning: '%d' directive writing between 1 and 11 bytes into a region of size between 4 and 6 [-Wformat-overflow=] 1737 | sprintf(lmac->name, "cgx_fwi_%d_%d", cgx->cgx_id, i); | ^~ .../cgx.c:1737:37: note: directive argument in the range [-2147483641, 254] 1737 | sprintf(lmac->name, "cgx_fwi_%d_%d", cgx->cgx_id, i); | ^~~~~~~~~~~~~~~ .../cgx.c:1737:17: note: 'sprintf' output between 12 and 24 bytes into a destination of size 16 1737 | sprintf(lmac->name, "cgx_fwi_%d_%d", cgx->cgx_id, i); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Empirically, changing the type of i from (signed) int to unsigned int addresses this problem. I assume by allowing GCC to see the range of values described above. Also update the format specifiers for the integer values in the string in question from %d to %u. This seems appropriate as they are now both unsigned. No functional change intended. Compile tested only. Signed-off-by: Simon Horman <horms@kernel.org> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20250724-octeontx2-af-unsigned-v1-1-c745c106e06f@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
6 daysnet: Fix typosBjorn Helgaas
Fix typos in comments and error messages. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: David Arinzon <darinzon@amazon.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250723201528.2908218-1-helgaas@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
8 daysocteontx2-pf: access ->pp through netmem_desc instead of pageByungchul Park
To eliminate the use of struct page in page pool, the page pool users should use netmem descriptor and APIs instead. Make octeontx2-pf access ->pp through netmem_desc instead of page. Signed-off-by: Byungchul Park <byungchul@sk.com> Link: https://patch.msgid.link/20250721021835.63939-8-byungchul@sk.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
9 daysOcteontx2-af: Debugfs support for firmware dataHariprasad Kelam
MAC address, Link modes (supported and advertised) and eeprom data for the Netdev interface are read from the shared firmware data. This patch adds debugfs support for the same. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Link: https://patch.msgid.link/20250720163638.1560323-5-hkelam@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
9 daysOcteontx2-af: RPM: Update DMA maskHariprasad Kelam
CGX/RPM driver supports 48 bits of DMA addressing. Update the DMA mask accordingly. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250720163638.1560323-4-hkelam@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
9 daysOcteontx2-af: Disable stale DMAC filtersSubbaraya Sundeep
During driver initialization disable stale DMAC filters in CGX/RPM set by firmware. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250720163638.1560323-3-hkelam@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
9 daysOcteontx2-af: Add programmed macaddr to RVU pfvfHariprasad Kelam
Octeontx2/CN10k MAC block supports DMAC filters. DMAC filters can be installed on the interface through ethtool. When a user installs a DMAC filter, the interface's MAC address is implicitly added to the filter list. To ensure consistency, this MAC address must be kept in sync with the pfvf->mac_addr field, which is used to install MAC-based NPC rules. This patch updates the pfvf->mac_addr field with the programmed MAC address and also enables VF interfaces to install DMAC filters. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250720163638.1560323-2-hkelam@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-08eth: otx2: migrate to the *_rxfh_context opsJakub Kicinski
otx2 only supports additional indirection tables (no separate keys etc.) so the conversion to dedicated callbacks and core-allocated context is mostly removing the code which stores the extra tables in the driver. Core already stores the indirection tables for additional contexts, and doesn't call .get for them. One subtle change here is that we'll now start with the table covering all queues, not directing all traffic to queue 0. This is what core expects if the user doesn't pass the initial indir table explicitly (there's a WARN_ON() in the core trying to make sure driver authors don't forget to populate ctx to defaults). Drivers implementing .create_rxfh_context don't have to set cap_rss_ctx_supported, so remove it. Tested-by: Geetha Sowjanya <gakula@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250707184115.2285277-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-01time/timecounter: Fix the lie that struct cyclecounter is constGreg Kroah-Hartman
In both the read callback for struct cyclecounter, and in struct timecounter, struct cyclecounter is declared as a const pointer. Unfortunatly, a number of users of this pointer treat it as a non-const pointer as it is burried in a larger structure that is heavily modified by the callback function when accessed. This lie had been hidden by the fact that container_of() "casts away" a const attribute of a pointer without any compiler warning happening at all. Fix this all up by removing the const attribute in the needed places so that everyone can see that the structure really isn't const, but can, and is, modified by the users of it. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/2025070124-backyard-hurt-783a@gregkh
2025-06-29octeontx2-af: Fix error code in rvu_mbox_init()Dan Carpenter
The error code was intended to be -EINVAL here, but it was accidentally changed to returning success. Set the error code. Fixes: e53ee4acb220 ("octeontx2-af: CN20k basic mbox operations and structures") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-06-27Octeontx2-pf: ethtool: support multi advertise modeHariprasad Kelam
Current implementation considers only first advertise mode and passes the same to firmware to process. This patch extends code such that user can advertise multiple modes on the given interface. Below are high level changes: 1. Remove unnecessary speed/duplex/autoneg validation as its already verified as part of "set_link_ksettings" 2. Since scratch csr framework designed to support single mode at a time, use "shared firmware data" for multi mode support. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Link: https://patch.msgid.link/20250625092107.9746-4-hkelam@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-27Octeontx2-af: Introduce mode group indexHariprasad Kelam
Kernel and firmware communicates via scratch register which is 64 bit in size. [MODE_ID PORT AUTONEG DUPLEX SPEED CMD_ID OWNERSHIP ] 63-22 21-14 13 12 11-8 7-2 1-0 The existing MODE_ID bitmap can only support up to 42 modes. To resolve the issue, the unused port field is modified as below uint64_t reserved2:6; uint64_t mode_group_idx:2; 'mode_group_idx' categorize the mode ID range to accommodate more modes. To specify mode ID range of 0 - 41, this field will be 0. To specify mode ID range of 42 - 83, this field will be 1. mode ID will be still mentioned as 1 << (0 - 41). But the mode_group_idx decides the actual mode range Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Link: https://patch.msgid.link/20250625092107.9746-3-hkelam@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-27Octeontx-pf: Update SGMII mode mappingHariprasad Kelam
Current implementation maps ethtool link modes 10baseT/100baseT/1000baseT to single firmware mode SGMII. This create a problem for end users who want to advertise only one speed among them. This patch addresses the issue by mapping each ethtool link mode to a corresponding firmware mode also updates new modes supported by firmware. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Link: https://patch.msgid.link/20250625092107.9746-2-hkelam@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-21octeontx2-af: Fix rvu_mbox_init return pathSubbaraya Sundeep
rvu_mbox_init function makes use of error path for freeing memory which are local to the function in both success and failure conditions. This is unusual hence fix it by returning zero on success. With new cn20k code this is freeing valid memory in success case also. Fixes: e53ee4acb220 ("octeontx2-af: CN20k basic mbox operations and structures") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-06-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.16-rc3). No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18Octeontx2-pf: Fix Backpresure configurationHariprasad Kelam
NIX block can receive packets from multiple links such as MAC (RPM), LBK and CPT. ----------------- RPM --| NIX | ----------------- | | LBK Each link supports multiple channels for example RPM link supports 16 channels. In case of link oversubsribe, NIX will assert backpressure on receive channels. The previous patch considered a single channel per link, resulting in backpressure not being enabled on the remaining channels Fixes: a7ef63dbd588 ("octeontx2-af: Disable backpressure between CPT and NIX") Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250617063403.3582210-1-hkelam@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18eth: mvpp2: migrate to new RXFH callbacksJakub Kicinski
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool: add dedicated callbacks for getting and setting rxfh fields"). Reviewed-by: Joe Damato <joe@dama.to> Link: https://patch.msgid.link/20250617014848.436741-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18eth: otx2: migrate to new RXFH callbacksJakub Kicinski
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool: add dedicated callbacks for getting and setting rxfh fields"). Link: https://patch.msgid.link/20250617014555.434790-6-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-16octeontx2-pf: CN20K mbox implementation between PF-VFSai Krishna
This patch implements the CN20k MBOX communication between PF and it's VFs. CN20K silicon got extra interrupt of MBOX response for trigger interrupt. Also few of the CSR offsets got changed in CN20K against prior series of silicons. Signed-off-by: Sai Krishna <saikrishnag@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Link: https://patch.msgid.link/1749639716-13868-7-git-send-email-sbhatta@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-16octeontx2-af: CN20K mbox implementation for AF's VFSai Krishna
This patch implements the CN20k MBOX communication between AF and AF's VFs. This implementation uses separate trigger interrupts for request, response messages against using trigger message data in CN10K. Signed-off-by: Sai Krishna <saikrishnag@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Link: https://patch.msgid.link/1749639716-13868-6-git-send-email-sbhatta@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-16octeontx2-pf: CN20K mbox REQ/ACK implementation for NIC PFSai Krishna
This implementation uses separate trigger interrupts for request, response messages against using trigger message data in CN10K. This patch adds support for basic mbox implementation for CN20K from NIC PF side. Signed-off-by: Sai Krishna <saikrishnag@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Link: https://patch.msgid.link/1749639716-13868-5-git-send-email-sbhatta@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-16octeontx2-af: CN20k mbox to support AF REQ/ACK functionalitySai Krishna
This implementation uses separate trigger interrupts for request, response MBOX messages against using trigger message data in CN10K. This patch adds support for basic mbox implementation for CN20K from AF side. Signed-off-by: Sai Krishna <saikrishnag@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Link: https://patch.msgid.link/1749639716-13868-4-git-send-email-sbhatta@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-16octeontx2-af: CN20k basic mbox operations and structuresSai Krishna
This patch adds basic mbox operation APIs and structures to add support for mbox module on CN20k silicon. There are few CSR offsets, interrupts changed between CN20k and prior Octeon series of devices. Signed-off-by: Sai Krishna <saikrishnag@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Link: https://patch.msgid.link/1749639716-13868-3-git-send-email-sbhatta@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-16octeontx2: Set appropriate PF, VF masks and shifts based on siliconSubbaraya Sundeep
Number of RVU PFs on CN20K silicon have increased to 96 from maximum of 32 that were supported on earlier silicons. Every RVU PF and VF is identified by HW using a 16bit PF_FUNC value. Due to the change in Max number of PFs in CN20K, the bit encoding of this PF_FUNC has changed. This patch handles the change by using helper functions(using silicon check) to use PF,VF masks and shifts to support both new silicon CN20K, OcteonTx series. These helper functions are used in different modules. Also moved the NIX AF register offset macros to other files which will be posted in coming patches. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sai Krishna <saikrishnag@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Link: https://patch.msgid.link/1749639716-13868-2-git-send-email-sbhatta@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-12eth: remove empty RXFH handling from driversJakub Kicinski
We're migrating RXFH config to new callbacks. Remove RXFH handling from drivers where it does nothing. Reviewed-by: Ziwei Xiao <ziweixiao@google.com> Link: https://patch.msgid.link/20250611145949.2674086-6-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.16-rc2). No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-10octeontx2-pf: Avoid typecasts by simplifying otx2_atomic64_add macroSubbaraya Sundeep
Just because otx2_atomic64_add is using u64 pointer as argument all callers has to typecast __iomem void pointers which inturn causing sparse warnings. Fix those by changing otx2_atomic64_add argument to void pointer. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Link: https://patch.msgid.link/1749484421-3607-1-git-send-email-sbhatta@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-10octeontx2: Annotate mmio regions as __iomemSubbaraya Sundeep
This patch removes unnecessary typecasts by marking the mbox_regions array as __iomem since it is used to store pointers to memory-mapped I/O (MMIO) regions. Also simplified the call to readq() in PF driver by removing redundant type casts. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Link: https://patch.msgid.link/1749484309-3434-1-git-send-email-sbhatta@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-08treewide, timers: Rename from_timer() to timer_container_of()Ingo Molnar
Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
2025-05-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Merge in late fixes to prepare for the 6.16 net-next PR. No conflicts nor adjacent changes. Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-28octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callbackHariprasad Kelam
This patch addresses below issues, 1. Active traffic on the leaf node must be stopped before its send queue is reassigned to the parent. This patch resolves the issue by marking the node as 'Inner'. 2. During a system reboot, the interface receives TC_HTB_LEAF_DEL and TC_HTB_LEAF_DEL_LAST callbacks to delete its HTB queues. In the case of TC_HTB_LEAF_DEL_LAST, although the same send queue is reassigned to the parent, the current logic still attempts to update the real number of queues, leadning to below warnings New queues can't be registered after device unregistration. WARNING: CPU: 0 PID: 6475 at net/core/net-sysfs.c:1714 netdev_queue_update_kobjects+0x1e4/0x200 Fixes: 5e6808b4c68d ("octeontx2-pf: Add support for HTB offload") Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250522115842.1499666-1-hkelam@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-28octeontx2-pf: QOS: Perform cache sync on send queue teardownHariprasad Kelam
QOS is designed to create a new send queue whenever a class is created, ensuring proper shaping and scheduling. However, when multiple send queues are created and deleted in a loop, SMMU errors are observed. This patch addresses the issue by performing an data cache sync during the teardown of QOS send queues. Fixes: ab6dddd2a669 ("octeontx2-pf: qos send queues management") Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250522094742.1498295-1-hkelam@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-27octeontx2-pf: macsec: Get MACSEC capability flag from AFSubbaraya Sundeep
The presence of MACSEC block is currently figured out based on the running silicon variant. This may not be correct all the times since the MACSEC block can be fused out. Hence get the macsec info from AF via mailbox. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/1747894548-4657-1-git-send-email-sbhatta@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-27octeontx2-af: Add MACSEC capability flagSubbaraya Sundeep
MACSEC block may be fused out on some silicons hence modify get_hw_cap mailbox message to set a capability flag in its response message based on MACSEC block availability. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/1747894528-4611-1-git-send-email-sbhatta@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-26Merge tag 'ipsec-next-2025-05-23' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== 1) Remove some unnecessary strscpy_pad() size arguments. From Thorsten Blum. 2) Correct use of xso.real_dev on bonding offloads. Patchset from Cosmin Ratiu. 3) Add hardware offload configuration to XFRM_MSG_MIGRATE. From Chiachang Wang. 4) Refactor migration setup during cloning. This was done after the clone was created. Now it is done in the cloning function itself. From Chiachang Wang. 5) Validate assignment of maximal possible SEQ number. Prevent from setting to the maximum sequrnce number as this would cause for traffic drop. From Leon Romanovsky. 6) Prevent configuration of interface index when offload is used. Hardware can't handle this case.i From Leon Romanovsky. 7) Always use kfree_sensitive() for SA secret zeroization. From Zilin Guan. ipsec-next-2025-05-23 * tag 'ipsec-next-2025-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next: xfrm: use kfree_sensitive() for SA secret zeroization xfrm: prevent configuration of interface index when offload is used xfrm: validate assignment of maximal possible SEQ number xfrm: Refactor migration setup during the cloning process xfrm: Migrate offload configuration bonding: Fix multiple long standing offload races bonding: Mark active offloaded xfrm_states xfrm: Add explicit dev to .xdo_dev_state_{add,delete,free} xfrm: Remove unneeded device check from validate_xmit_xfrm xfrm: Use xdo.dev instead of xdo.real_dev net/mlx5: Avoid using xso.real_dev unnecessarily xfrm: Remove unnecessary strscpy_pad() size arguments ==================== Link: https://patch.msgid.link/20250523075611.3723340-1-steffen.klassert@secunet.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-26octeontx2-af: Send Link events one by oneSubbaraya Sundeep
Send link events one after another otherwise new message is overwriting the message which is being processed by PF. Fixes: a88e0f936ba9 ("octeontx2: Detect the mbox up or down message via register") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/1747823443-404-1-git-send-email-sbhatta@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-25octeontx2-af: NPC: Clear Unicast rule on nixlf detachHariprasad Kelam
The AF driver assigns reserved MCAM entries (for unicast, broadcast, etc.) based on the NIXLF number. When a NIXLF is detached, these entries are disabled. For example, PF NIXLF -------------------- PF0 0 SDP-VF0 1 If the user unbinds both PF0 and SDP-VF0 interfaces and then binds them in reverse order PF NIXLF --------------------- SDP-VF0 0 PF0 1 In this scenario, the PF0 unicast entry is getting corrupted because the MCAM entry contains stale data (SDP-VF0 ucast data) This patch resolves the issue by clearing the unicast MCAM entry during NIXLF detach Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.15-rc8). Conflicts: 80f2ab46c2ee ("irdma: free iwdev->rf after removing MSI-X") 4bcc063939a5 ("ice, irdma: fix an off by one in error handling code") c24a65b6a27c ("iidc/ice/irdma: Update IDC to support multiple consumers") https://lore.kernel.org/20250513130630.280ee6c5@canb.auug.org.au No extra adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-22octeontx2-af: Fix APR entry mapping based on APR_LMT_CFGGeetha sowjanya
The current implementation maps the APR table using a fixed size, which can lead to incorrect mapping when the number of PFs and VFs varies. This patch corrects the mapping by calculating the APR table size dynamically based on the values configured in the APR_LMT_CFG register, ensuring accurate representation of APR entries in debugfs. Fixes: 0daa55d033b0 ("octeontx2-af: cn10k: debugfs for dumping LMTST map table"). Signed-off-by: Geetha sowjanya <gakula@marvell.com> Link: https://patch.msgid.link/20250521060834.19780-3-gakula@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-22octeontx2-af: Set LMT_ENA bit for APR table entriesSubbaraya Sundeep
This patch enables the LMT line for a PF/VF by setting the LMT_ENA bit in the APR_LMT_MAP_ENTRY_S structure. Additionally, it simplifies the logic for calculating the LMTST table index by consistently using the maximum number of hw supported VFs (i.e., 256). Fixes: 873a1e3d207a ("octeontx2-af: cn10k: Setting up lmtst map table"). Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250521060834.19780-2-gakula@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-22octeontx2-pf: Avoid adding dcbnl_ops for LBK and SDP vfSuman Ghosh
Priority flow control is not supported for LBK and SDP vf. This patch adds support to not add dcbnl_ops for LBK and SDP vf. Fixes: 8e67558177f8 ("octeontx2-pf: PFC config support with DCBx") Signed-off-by: Suman Ghosh <sumang@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250519072658.2960851-1-sumang@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-20octeontx2-pf: Add tracepoint for NIX_PARSE_SSubbaraya Sundeep
The NIX_PARSE_S structure populated by hardware in the NIX RX CQE has parsing information for the received packet. A tracepoint to dump the all words of NIX_PARSE_S is helpful in debugging packet parser. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Link: https://patch.msgid.link/1747331048-15347-1-git-send-email-sbhatta@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.15-rc7). Conflicts: tools/testing/selftests/drivers/net/hw/ncdevmem.c 97c4e094a4b2 ("tests/ncdevmem: Fix double-free of queue array") 2f1a805f32ba ("selftests: ncdevmem: Implement devmem TCP TX") https://lore.kernel.org/20250514122900.1e77d62d@canb.auug.org.au Adjacent changes: net/core/devmem.c net/core/devmem.h 0afc44d8cdf6 ("net: devmem: fix kernel panic when netlink socket close after module unload") bd61848900bf ("net: devmem: Implement TX path") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-15net: prestera: Use to_delayed_work()Chen Ni
Use to_delayed_work() instead of open-coding it. Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Link: https://patch.msgid.link/20250514064053.2513921-1-nichen@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-15octeontx2: Add new tracepoint otx2_msg_statusSubbaraya Sundeep
Apart from netdev interface Octeontx2 PF does the following: 1. Sends its own requests to AF and receives responses from AF. 2. Receives async messages from AF. 3. Forwards VF requests to AF, sends respective responses from AF to VFs. 4. Sends async messages to VFs. This patch adds new tracepoint otx2_msg_status to display the status of PF wrt mailbox handling. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Link: https://patch.msgid.link/1747136408-30685-5-git-send-email-sbhatta@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-15octeontx2: Add pcifunc also to mailbox tracepointsSubbaraya Sundeep
This patch adds pcifunc which represents PF and VF device to the tracepoints otx2_msg_alloc, otx2_msg_send, otx2_msg_process so that it is easier to correlate which device allocated the message, which device forwarded it and which device processed that message. Also add message id in otx2_msg_send tracepoint to check which message is sent at any point of time from a device. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Link: https://patch.msgid.link/1747136408-30685-4-git-send-email-sbhatta@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-15octeontx2-af: Display names for CPT and UP messagesSubbaraya Sundeep
Mailbox UP messages and CPT messages names are not being displayed with their names in trace log files. Add those messages too in otx2_mbox_id2name. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Link: https://patch.msgid.link/1747136408-30685-3-git-send-email-sbhatta@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-15octeontx2-af: convert dev_dbg to tracepoint in mboxSubbaraya Sundeep
Use tracepoint instead of dev_dbg since the entire mailbox code uses tracepoints for debugging. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Link: https://patch.msgid.link/1747136408-30685-2-git-send-email-sbhatta@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-15octeontx2-pf: Do not reallocate all ntuple filtersSubbaraya Sundeep
If ntuple filters count is modified followed by unicast filters count using devlink then the ntuple count set by user is ignored and all the ntuple filters are being reallocated. Fix this by storing the ntuple count set by user. Without this patch, say if user tries to modify ntuple count as 8 followed by ucast filter count as 4 using devlink commands then ntuple count is being reverted to default value 16 i.e, not retaining user set value 8. Fixes: 39c469188b6d ("octeontx2-pf: Add ucast filter count configurability via devlink.") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/1747054357-5850-1-git-send-email-sbhatta@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 17:32:02 +0000