| Age | Commit message (Collapse) | Author |
|---|
|
Simple:
s/ice_aq_str/libie_aq_str
Add libie_aminq module in ice Kconfig.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The descriptor structure is the same in ice, ixgbe and i40e. Move it to
common libie header to use it across different driver.
Leave device specific adminq commands in separate folders. This lead to
a change that need to be done in filling/getting descriptor:
- previous: struct specific_desc *cmd;
cmd = &desc.params.specific_desc;
- now: struct specific_desc *cmd;
cmd = libie_aq_raw(&desc);
Do this changes across the driver to allow clean build. The casting only
have to be done in case of specific descriptors, for generic one union
can still be used.
Changes beside code moving:
- change ICE_ prefix to LIBIE_ prefix (ice_ and libie_ too)
- remove shift variables not otherwise needed (in libie_aq_flags)
- fill/get descriptor data based on desc.params.raw whenever the
descriptor isn't defined in libie
- move defines from the libie_aq_sth structure outside
- add libie_aq_raw helper and use it instead of explicit casting
Reviewed by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
GCC 7 is not as good as GCC 8+ in telling what is a compile-time
const, and thus could be used for static storage.
Fortunately keeping strings as const arrays is enough to make old
gcc happy.
Excerpt from the report:
My GCC is: gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0.
CC [M] drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.o
drivers/net/ethernet/intel/ice/devlink/health.c:35:3: error: initializer element is not constant
ice_common_port_solutions, {ice_port_number_label}},
^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/intel/ice/devlink/health.c:35:3: note: (near initialization for 'ice_health_status_lookup[0].solution')
drivers/net/ethernet/intel/ice/devlink/health.c:35:31: error: initializer element is not constant
ice_common_port_solutions, {ice_port_number_label}},
^~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/intel/ice/devlink/health.c:35:31: note: (near initialization for 'ice_health_status_lookup[0].data_label[0]')
drivers/net/ethernet/intel/ice/devlink/health.c:37:46: error: initializer element is not constant
"Change or replace the module or cable.", {ice_port_number_label}},
^~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/intel/ice/devlink/health.c:37:46: note: (near initialization for 'ice_health_status_lookup[1].data_label[0]')
drivers/net/ethernet/intel/ice/devlink/health.c:39:3: error: initializer element is not constant
ice_common_port_solutions, {ice_port_number_label}},
^~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 85d6164ec56d ("ice: add fw and port health reporters")
Reported-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Closes: https://lore.kernel.org/netdev/CY8PR11MB7134BF7A46D71E50D25FA7A989F72@CY8PR11MB7134.namprd11.prod.outlook.com
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Firmware generates events for global events or port specific events.
Driver shall subscribe for health status events from firmware on supported
FW versions >= 1.7.6.
Driver shall expose those under specific health reporter, two new
reporters are introduced:
- FW health reporter shall represent global events (problems with the
image, recovery mode);
- Port health reporter shall represent port-specific events (module
failure).
Firmware only reports problems when those are detected, it does not store
active fault list.
Driver will hold only last global and last port-specific event.
Driver will report all events via devlink health report,
so in case of multiple events of the same source they can be reviewed
using devlink autodump feature.
$ devlink health
pci/0000:b1:00.3:
reporter fw
state healthy error 0 recover 0 auto_dump true
reporter port
state error error 1 recover 0 last_dump_date 2024-03-17
last_dump_time 09:29:29 auto_dump true
$ devlink health diagnose pci/0000:b1:00.3 reporter port
Syndrome: 262
Description: Module is not present.
Possible Solution: Check that the module is inserted correctly.
Port Number: 0
Tested on Intel Corporation Ethernet Controller E810-C for SFP
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Co-developed-by: Sharon Haroni <sharon.haroni@intel.com>
Signed-off-by: Sharon Haroni <sharon.haroni@intel.com>
Co-developed-by: Nicholas Nunley <nicholas.d.nunley@intel.com>
Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com>
Co-developed-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Konrad Knitter <konrad.knitter@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add a devlink health reporter for MDD events. The 'dump' handler will
return the information captured in each call to ice_handle_mdd_event().
A device reset (CORER/PFR) will put the reporter back in healthy state.
Signed-off-by: Ben Shelton <benjamin.h.shelton@intel.com>
Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Co-developed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add Tx hang devlink health reporter, see struct ice_tx_hang_event to see
what exactly is reported. For now dump descriptors with little metadata
and skb diagnostic information.
Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
