| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
libie: commonize adminq structure
Michal Swiatkowski says:
It is a prework to allow reusing some specific Intel code (eq. fwlog).
Move common *_aq_desc structure to libie header and changing
it in ice, ixgbe, i40e and iavf.
Only generic adminq commands can be easily moved to common header, as
rest is slightly different. Format remains the same. It will be better
to correctly move it when it will be needed to commonize other part of
the code.
Move *_aq_str() to new libie module (libie_adminq) and use it across
drivers. The functions are exactly the same in each driver. Some more
adminq helpers/functions can be moved to libie_adminq when needed.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
i40e: use libie_aq_str
iavf: use libie_aq_str
ice: use libie_aq_str
libie: add adminq helper for converting err to str
iavf: use libie adminq descriptors
i40e: use libie adminq descriptors
ixgbe: use libie adminq descriptors
ice, libie: move generic adminq descriptors to lib
====================
Link: https://patch.msgid.link/20250724182826.3758850-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix typos in comments and error messages.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: David Arinzon <darinzon@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250723201528.2908218-1-helgaas@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simple:
s/ice_aq_str/libie_aq_str
Add libie_aminq module in ice Kconfig.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The descriptor structure is the same in ice, ixgbe and i40e. Move it to
common libie header to use it across different driver.
Leave device specific adminq commands in separate folders. This lead to
a change that need to be done in filling/getting descriptor:
- previous: struct specific_desc *cmd;
cmd = &desc.params.specific_desc;
- now: struct specific_desc *cmd;
cmd = libie_aq_raw(&desc);
Do this changes across the driver to allow clean build. The casting only
have to be done in case of specific descriptors, for generic one union
can still be used.
Changes beside code moving:
- change ICE_ prefix to LIBIE_ prefix (ice_ and libie_ too)
- remove shift variables not otherwise needed (in libie_aq_flags)
- fill/get descriptor data based on desc.params.raw whenever the
descriptor isn't defined in libie
- move defines from the libie_aq_sth structure outside
- add libie_aq_raw helper and use it instead of explicit casting
Reviewed by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Introduce the ICE_AQC_PORT_OPT_MAX_LANE_40G constant and update the code
to process this new option in both the devlink and the Admin Queue Command
GET PORT OPTION (opcode 0x06EA) message, similar to existing constants like
ICE_AQC_PORT_OPT_MAX_LANE_50G, ICE_AQC_PORT_OPT_MAX_LANE_100G, and so on.
This feature allows the driver to correctly report configuration options
for 2x40G on E823 and other cards in the future via devlink.
Example command:
devlink port split pci/0000:01:00.0/0 count 2
Example dmesg:
ice 0000:01:00.0: Available port split options and max port speeds (Gbps):
ice 0000:01:00.0: Status Split Quad 0 Quad 1
ice 0000:01:00.0: count L0 L1 L2 L3 L4 L5 L6 L7
ice 0000:01:00.0: 2 40 - - - 40 - - -
ice 0000:01:00.0: 2 50 - 50 - - - - -
ice 0000:01:00.0: 4 25 25 25 25 - - - -
ice 0000:01:00.0: 4 25 25 - - 25 25 - -
ice 0000:01:00.0: Active 8 10 10 10 10 10 10 10 10
ice 0000:01:00.0: 1 100 - - - - - - -
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In preparation of supporting more than a single core PCI driver
for RDMA, move ice specific structs like qset_params, qos_info
and qos_params from iidc_rdma.h to iidc_rdma_ice.h.
Previously, the ice driver was just exporting its entire PF struct
to the auxiliary driver, but since each core driver will have its own
different PF struct, implement a universal struct that all core drivers
can provide to the auxiliary driver through the probe call.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Co-developed-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Co-developed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Co-developed-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Merge in late fixes to prepare for the 6.15 net-next PR.
No conflicts, adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
919f9f497dbc ("eth: bnxt: fix out-of-range access of vnic_info array")
fe96d717d38e ("bnxt_en: Extend queue stop/start for TX rings")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GCC 7 is not as good as GCC 8+ in telling what is a compile-time
const, and thus could be used for static storage.
Fortunately keeping strings as const arrays is enough to make old
gcc happy.
Excerpt from the report:
My GCC is: gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0.
CC [M] drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.o
drivers/net/ethernet/intel/ice/devlink/health.c:35:3: error: initializer element is not constant
ice_common_port_solutions, {ice_port_number_label}},
^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/intel/ice/devlink/health.c:35:3: note: (near initialization for 'ice_health_status_lookup[0].solution')
drivers/net/ethernet/intel/ice/devlink/health.c:35:31: error: initializer element is not constant
ice_common_port_solutions, {ice_port_number_label}},
^~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/intel/ice/devlink/health.c:35:31: note: (near initialization for 'ice_health_status_lookup[0].data_label[0]')
drivers/net/ethernet/intel/ice/devlink/health.c:37:46: error: initializer element is not constant
"Change or replace the module or cable.", {ice_port_number_label}},
^~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/intel/ice/devlink/health.c:37:46: note: (near initialization for 'ice_health_status_lookup[1].data_label[0]')
drivers/net/ethernet/intel/ice/devlink/health.c:39:3: error: initializer element is not constant
ice_common_port_solutions, {ice_port_number_label}},
^~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 85d6164ec56d ("ice: add fw and port health reporters")
Reported-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Closes: https://lore.kernel.org/netdev/CY8PR11MB7134BF7A46D71E50D25FA7A989F72@CY8PR11MB7134.namprd11.prod.outlook.com
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
ice: managing MSI-X in driver
Michal Swiatkowski says:
It is another try to allow user to manage amount of MSI-X used for each
feature in ice. First was via devlink resources API, it wasn't accepted
in upstream. Also static MSI-X allocation using devlink resources isn't
really user friendly.
This try is using more dynamic way. "Dynamic" across whole kernel when
platform supports it and "dynamic" across the driver when not.
To achieve that reuse global devlink parameter pf_msix_max and
pf_msix_min. It fits how ice hardware counts MSI-X. In case of ice amount
of MSI-X reported on PCI is a whole MSI-X for the card (with MSI-X for
VFs also). Having pf_msix_max allow user to statically set how many
MSI-X he wants on PF and how many should be reserved for VFs.
pf_msix_min is used to set minimum number of MSI-X with which ice driver
should probe correctly.
Meaning of this field in case of dynamic vs static allocation:
- on system with dynamic MSI-X allocation support
* alloc pf_msix_min as static, rest will be allocated dynamically
- on system without dynamic MSI-X allocation support
* try alloc pf_msix_max as static, minimum acceptable result is
pf_msix_min
As Jesse and Piotr suggested pf_msix_max and pf_msix_min can (an
probably should) be stored in NVM. This patchset isn't implementing
that.
Dynamic (kernel or driver) way means that splitting MSI-X across the
RDMA and eth in case there is a MSI-X shortage isn't correct. Can work
when dynamic is only on driver site, but can't when dynamic is on kernel
site.
Let's remove this code and move to MSI-X allocation feature by feature.
If there is no more MSI-X for a feature, a feature is working with less
MSI-X or it is turned off.
There is a regression here. With MSI-X splitting user can run RDMA and
eth even on system with not enough MSI-X. Now only eth will work. RDMA
can be turned on by changing number of PF queues (lowering) and reprobe
RDMA driver.
Example:
72 CPU number, eth, RDMA and flow director (1 MSI-X), 1 MSI-X for OICR
on PF, and 1 more for RDMA. Card is using 1 + 72 + 1 + 72 + 1 = 147.
We set pf_msix_min = 2, pf_msix_max = 128
OICR: 1
eth: 72
flow director: 1
RDMA: 128 - 74 = 54
We can change number of queues on pf to 36 and do devlink reinit
OICR: 1
eth: 36
RDMA: 73
flow director: 1
We can also (implemented in "ice: enable_rdma devlink param") turned
RDMA off.
OICR: 1
eth: 72
RDMA: 0 (turned off)
flow director: 1
After this changes we have a static base vector for SRIOV (SIOV probably
in the feature). Last patch from this series is simplifying managing VF
MSI-X code based on static vector.
Now changing queues using ethtool is also changing MSI-X. If there is
enough MSI-X it is always one to one. When there is not enough there
will be more queues than MSI-X.
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: init flow director before RDMA
ice: simplify VF MSI-X managing
ice: enable_rdma devlink param
ice: treat dyn_allowed only as suggestion
ice, irdma: move interrupts code to irdma
ice: get rid of num_lan_msix field
ice: remove splitting MSI-X between features
ice: devlink PF MSI-X max and min parameter
ice: count combined queues using Rx/Tx count
====================
Link: https://patch.msgid.link/20250205185512.895887-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement enable_rdma devlink parameter to allow user to turn RDMA
feature on and off.
It is useful when there is no enough interrupts and user doesn't need
RDMA feature.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Use generic devlink PF MSI-X parameter to allow user to change MSI-X
range.
Add notes about this parameters into ice devlink documentation.
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add check for the return value of devm_kzalloc() to guarantee the success
of allocation.
Fixes: 42c2eb6b1f43 ("ice: Implement devlink-rate API")
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250131013832.24805-1-jiashengjiangcool@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Recovery Mode is intended to recover from a fatal failure scenario in
which the device is not accessible to the host, meaning the firmware is
non-responsive.
The purpose of the Firmware Recovery Mode is to enable software tools to
update firmware and/or device configuration so the fatal error can be
resolved.
Recovery Mode Firmware supports a limited set of admin commands required
for NVM update.
Recovery Firmware does not support hardware interrupts so a polling mode
is used.
The driver will expose only the minimum set of devlink commands required
for the recovery of the adapter.
Using an appropriate NVM image, the user can recover the adapter using
the devlink flash API.
Prior to 4.20 E810 Adapter Recovery Firmware supports only the update
and erase of the "fw.mgmt" component.
E810 Adapter Recovery Firmware doesn't support selected preservation of
cards settings or identifiers.
The following command can be used to recover the adapter:
$ devlink dev flash <pci-address> <update-image.bin> component fw.mgmt
overwrite settings overwrite identifier
Newer FW versions (4.20 or newer) supports update of "fw.undi" and
"fw.netlist" components.
$ devlink dev flash <pci-address> <update-image.bin>
Tested on Intel Corporation Ethernet Controller E810-C for SFP
FW revision 3.20 and 4.30.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Konrad Knitter <konrad.knitter@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Firmware generates events for global events or port specific events.
Driver shall subscribe for health status events from firmware on supported
FW versions >= 1.7.6.
Driver shall expose those under specific health reporter, two new
reporters are introduced:
- FW health reporter shall represent global events (problems with the
image, recovery mode);
- Port health reporter shall represent port-specific events (module
failure).
Firmware only reports problems when those are detected, it does not store
active fault list.
Driver will hold only last global and last port-specific event.
Driver will report all events via devlink health report,
so in case of multiple events of the same source they can be reviewed
using devlink autodump feature.
$ devlink health
pci/0000:b1:00.3:
reporter fw
state healthy error 0 recover 0 auto_dump true
reporter port
state error error 1 recover 0 last_dump_date 2024-03-17
last_dump_time 09:29:29 auto_dump true
$ devlink health diagnose pci/0000:b1:00.3 reporter port
Syndrome: 262
Description: Module is not present.
Possible Solution: Check that the module is inserted correctly.
Port Number: 0
Tested on Intel Corporation Ethernet Controller E810-C for SFP
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Co-developed-by: Sharon Haroni <sharon.haroni@intel.com>
Signed-off-by: Sharon Haroni <sharon.haroni@intel.com>
Co-developed-by: Nicholas Nunley <nicholas.d.nunley@intel.com>
Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com>
Co-developed-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Konrad Knitter <konrad.knitter@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Split ice_init_hw() call out from ice_init_dev(). Such move enables
pulling the former to be even earlier on call path, what would enable
moving ice_adapter init to be between the two (in subsequent commit).
Such move enables ice_adapter to know about number of PFs.
Do the same for ice_deinit_hw(), so the init and deinit calls could
be easily mirrored.
Next commit will rename unrelated goto labels to unroll prefix.
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add a devlink health reporter for MDD events. The 'dump' handler will
return the information captured in each call to ice_handle_mdd_event().
A device reset (CORER/PFR) will put the reporter back in healthy state.
Signed-off-by: Ben Shelton <benjamin.h.shelton@intel.com>
Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Co-developed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add Tx hang devlink health reporter, see struct ice_tx_hang_event to see
what exactly is reported. For now dump descriptors with little metadata
and skb diagnostic information.
Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Drop "devlink_" prefix from files that sit in devlink/.
I'm going to add more files there, and repeating "devlink" does not feel
good. This is also the scheme used in most other places, most notably the
devlink core files are named like that.
devlink.[ch] stays as is.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
There is no support for SF in legacy mode. Reflect it in the code.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Fixes: eda69d654c7e ("ice: add basic devlink subfunctions support")
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use previously implemented SF aux driver. It is probe during SF
activation and remove after deactivation.
Implement set/get hw_address and set/get state as basic devlink ops for
subfunction.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Flow for creating Tx topology is the same as for VF port representors,
but the devlink port is stored in different place (sf->devlink_port).
When creating VF devlink lock isn't taken, when creating subfunction it
is. Setting Tx topology function needs to take this lock, check if it
was taken before to not do it twice.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Implement attaching and detaching SF port representor. It is done in the
same way as the VF port representor.
SF port representor is always added or removed with devlink
lock taken.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Keep the same flow of port representor creation, but instead of general
attach function create helpers for specific representor type.
Store function pointer for add and remove representor.
Type of port representor can be also known based on VSI type, but it
is more clean to have it directly saved in port representor structure.
Add devlink lock for whole port representor creation and destruction.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Implement subfunction driver. It is probe when subfunction port is
activated.
VSI is already created. During the probe VSI is being configured.
MAC unicast and broadcast filter is added to allow traffic to pass.
Store subfunction pointer in VSI struct. The same is done for VF
pointer. Make union of subfunction and VF pointer as only one of them
can be set with one VSI.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Allocate devlink for subfunction instance.
Create header file for subfunction device. Define subfunction device
structure there as it is needed for devlink allocation.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Implement devlink port handlers responsible for ethernet type devlink
subfunctions. Create subfunction devlink port and setup all resources
needed for a subfunction netdev to operate. Configure new VSI for each
new subfunction, initialize and configure interrupts and Tx/Rx resources.
Set correct MAC filters and create new netdev.
For now, subfunction is limited to only one Tx/Rx queue pair.
Only allocate new subfunction VSI with devlink port new command.
Allocate and free subfunction MSIX interrupt vectors using new API
calls with pci_msix_alloc_irq_at and pci_msix_free_irq.
Support both automatic and manual subfunction numbers. If no subfunction
number is provided, use xa_alloc to pick a number automatically. This
will find the first free index and use that as the number. This reduces
burden on users in the simple case where a specific number is not
required. It may also be slightly faster to check that a number exists
since xarray lookup should be faster than a linear scan of the dyn_ports
xarray.
Co-developed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Use always the same pf id in devlink port number. When doing
pass-through the PF to VM bus info func number can be any value.
Fixes: 2ae0aa4758b0 ("ice: Move devlink port to PF/VF struct")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Suggested-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add support for driver-specific devlink local_forwarding param.
Supported values are "enabled", "disabled" and "prioritized".
Default configuration is set to "enabled".
Add documentation in networking/devlink/ice.rst.
In previous generations of Intel NICs the transmit scheduler was only
limited by PCIe bandwidth when scheduling/assigning hairpin-bandwidth
between VFs. Changes to E810 HW design introduced scheduler limitation,
so that available hairpin-bandwidth is bound to external port speed.
In order to address this limitation and enable NFV services such as
"service chaining" a knob to adjust the scheduler config was created.
Driver can send a configuration message to the FW over admin queue and
internal FW logic will reconfigure HW to prioritize and add more BW to
VF to VF traffic. An end result, for example, 10G port will no longer
limit hairpin-bandwidth to 10G and much higher speeds can be achieved.
Devlink local_forwarding param set to "prioritized" enables higher
hairpin-bandwitdh on related PFs. Configuration is applicable only to
8x10G and 4x25G cards.
Changing local_forwarding configuration will trigger CORER reset in
order to take effect.
Example command to change current value:
devlink dev param set pci/0000:b2:00.3 name local_forwarding \
value prioritized \
cmode runtime
Co-developed-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Pawel Kaminski <pawel.kaminski@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Changing the MAC address of the VFs is currently unsupported via devlink.
Add the function handlers to set and get the HW address for the VFs.
Signed-off-by: Karthik Sundaravel <ksundara@redhat.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In case of subfunction lock will be taken for whole port creation and
removing. Do the same in VF case.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
On module load, the ice driver checks for the lack of a specific PF
capability to determine if it should reduce the number of devlink params
to register. One situation when this test returns true is when the
driver loads in safe mode. The same check is not present on the unload
path when devlink params are unregistered. This results in the driver
triggering a WARN_ON in the kernel devlink code.
The current check and code path uses a reduction in the number of elements
reported in the list of params. This is fragile and not good for future
maintaining.
Change the parameters to be held in two lists, one always registered and
one dependent on the check.
Add a symmetrical check in the unload path so that the correct parameters
are unregistered as well.
Fixes: 109eb2917284 ("ice: Add tx_scheduling_layers devlink param")
CC: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-8-dc8593d2bbc6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refactor struct ice_vsi_cfg_params to be embedded into struct ice_vsi.
Prior to that the members of the struct were scattered around ice_vsi,
and were copy-pasted for purposes of reinit.
Now we have struct handy, and it is easier to have something sticky
in the flags field.
Suggested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Vaishnavi Tipireddy <vaishnavi.tipireddy@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
It was observed that Tx performance was inconsistent across all queues
and/or VSIs and that it was directly connected to existing 9-layer
topology of the Tx scheduler.
Introduce new private devlink param - tx_scheduling_layers. This parameter
gives user flexibility to choose the 5-layer transmit scheduler topology
which helps to smooth out the transmit performance.
Allowed parameter values are 5 and 9.
Example usage:
Show:
devlink dev param show pci/0000:4b:00.0 name tx_scheduling_layers
pci/0000:4b:00.0:
name tx_scheduling_layers type driver-specific
values:
cmode permanent value 9
Set:
devlink dev param set pci/0000:4b:00.0 name tx_scheduling_layers value 5
cmode permanent
devlink dev param set pci/0000:4b:00.0 name tx_scheduling_layers value 9
cmode permanent
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Extend devlink_param *set function pointer to take extack as a param.
Sometimes it is needed to pass information to the end user from set
function. It is more proper to use for that netlink instead of passing
message to dmesg.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Simplify devlink lock code in driver by taking it for whole init/cleanup
path. Instead of calling devlink functions that taking lock call the
lockless versions.
Suggested-by: Jiri Pirko <jiri@resnulli.us>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Keep devlink related code in a separate file. More devlink port code and
handlers will be added here for other port operations.
Remove no longer needed include of our devlink.h in ice_lib.c.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Only moving whole files, fixing Makefile and bunch of includes.
Some changes to ice_devlink file was done even in representor part (Tx
topology), so keep it as final patch to not mess up with rebasing.
After moving to devlink folder there is no need to have such long name
for these files. Rename them to simple devlink.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
