| Age | Commit message (Collapse) | Author |
|---|
|
Pass along the format information from the top to .fb_create()
so that we can avoid redundant (and somewhat expensive) lookups
in the drivers.
Done with cocci (with some manual fixups):
@@
identifier func =~ ".*create.*";
identifier dev, file, mode_cmd;
@@
struct drm_framebuffer *func(
struct drm_device *dev,
struct drm_file *file,
+ const struct drm_format_info *info,
const struct drm_mode_fb_cmd2 *mode_cmd)
{
...
(
- const struct drm_format_info *info = drm_get_format_info(...);
|
- const struct drm_format_info *info;
...
- info = drm_get_format_info(...);
)
<...
- if (!info)
- return ...;
...>
}
@@
identifier func =~ ".*create.*";
identifier dev, file, mode_cmd;
@@
struct drm_framebuffer *func(
struct drm_device *dev,
struct drm_file *file,
+ const struct drm_format_info *info,
const struct drm_mode_fb_cmd2 *mode_cmd)
{
...
}
@find@
identifier fb_create_func =~ ".*create.*";
identifier dev, file, mode_cmd;
@@
struct drm_framebuffer *fb_create_func(
struct drm_device *dev,
struct drm_file *file,
+ const struct drm_format_info *info,
const struct drm_mode_fb_cmd2 *mode_cmd);
@@
identifier find.fb_create_func;
expression dev, file, mode_cmd;
@@
fb_create_func(dev, file
+ ,info
,mode_cmd)
@@
expression dev, file, mode_cmd;
@@
drm_gem_fb_create(dev, file
+ ,info
,mode_cmd)
@@
expression dev, file, mode_cmd;
@@
drm_gem_fb_create_with_dirty(dev, file
+ ,info
,mode_cmd)
@@
expression dev, file_priv, mode_cmd;
identifier info, fb;
@@
info = drm_get_format_info(...);
...
fb = dev->mode_config.funcs->fb_create(dev, file_priv
+ ,info
,mode_cmd);
@@
identifier dev, file_priv, mode_cmd;
@@
struct drm_mode_config_funcs {
...
struct drm_framebuffer *(*fb_create)(struct drm_device *dev,
struct drm_file *file_priv,
+ const struct drm_format_info *info,
const struct drm_mode_fb_cmd2 *mode_cmd);
...
};
v2: Fix kernel docs (Laurent)
Fix commit msg (Geert)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <lumag@kernel.org>
Cc: Sean Paul <sean@poorly.run>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Biju Das <biju.das.jz@bp.renesas.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Andy Yan <andy.yan@rock-chips.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Mikko Perttunen <mperttunen@nvidia.com>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: "Maíra Canal" <mcanal@igalia.com>
Cc: Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: Gurchetan Singh <gurchetansingh@chromium.org>
Cc: Chia-I Wu <olvaffe@gmail.com>
Cc: Zack Rusin <zack.rusin@broadcom.com>
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: virtualization@lists.linux.dev
Cc: spice-devel@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-5-ville.syrjala@linux.intel.com
|
|
We stopped using the driver initialized date in commit 7fb8af6798e8
("drm: deprecate driver date") and (eventually) started returning "0"
for drm_version ioctl instead.
Finish the job, and remove the unused date member from struct
drm_driver, its initialization from drivers, along with the common
DRIVER_DATE macros.
v2: Also update drivers/accel (kernel test robot)
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Simon Ser <contact@emersion.fr>
Acked-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1f2bf2543aed270a06f6c707fd6ed1b78bf16712.1733322525.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Move the public header file drm_client_setup.h to the clients/
subdirectory and update all drivers. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241108154600.126162-3-tzimmermann@suse.de
|
|
drm_kms_helper_poll_init needs to be called after zynqmp_dpsub_kms_init.
zynqmp_dpsub_kms_init creates the connector and without it we don't
enable hotplug detection.
Fixes: eb2d64bfcc17 ("drm: xlnx: zynqmp_dpsub: Report HPD through the bridge")
Cc: stable@vger.kernel.org
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028134218.54727-1-lists@steffen.cc
|
|
Prevent userspace accesses to the DRM device from causing
use-after-frees by unplugging the device before we remove it. This
causes any further userspace accesses to result in an error without
further calls into this driver's internals.
Fixes: d76271d22694 ("drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem")
Closes: https://lore.kernel.org/dri-devel/4d8f4c9b-2efb-4774-9a37-2f257f79b2c9@linux.dev/
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-2-sean.anderson@linux.dev
|
|
Call drm_client_setup_with_fourcc() to run the kernel's default client
setup for DRM. Set fbdev_probe in struct drm_driver, so that the client
setup can start the common fbdev client.
v5:
- select DRM_CLIENT_SELECTION
v2:
- use drm_client_setup_with_fourcc()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: Michal Simek <michal.simek@amd.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-48-tzimmermann@suse.de
|
|
drm_encoder_cleanup is responsible for calling drm_bridge_detach for
each bridge attached to the encoder. zynqmp_dp_bridge_detach is in turn
responsible for unregistering the AUX bus. However, we never ended up
calling drm_encoder_cleanup in the remove or error paths, so the AUX bus
would stick around after the rest of the driver had been removed.
I don't really understand why drm_mode_config_cleanup doesn't call
drm_encoder_cleanup for us. It will call destroy (which for
simple_encoder is drm_encoder_cleanup) on encoders in the mode_config's
encoder_list.
Should drm_encoder_cleanup get called before or after
drm_atomic_helper_shutdown?
Fixes: 2dfd045c8435 ("drm: xlnx: zynqmp_dpsub: Register AUX bus at bridge attach time")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503192922.2172314-2-sean.anderson@linux.dev
|
|
Unconditionally enable the DPSUB layer in the corresponding atomic plane
update callback. Setting the new display mode may require disabling and
re-enabling the CRTC. This effectively resets DPSUB to the default state
with all layers disabled. The original implementation of the plane atomic
update enables the corresponding DPSUB layer only if the framebuffer
format has changed. This would leave the layer disabled after switching to
a different display mode with the same framebuffer format.
Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240523-dp-layer-enable-v2-1-d799020098fc@amd.com
|
|
Set layer mode of operation (live or dma-based) during layer creation.
Each DPSUB layer mode of operation is defined by corresponding DT node port
connection, so it is possible to assign it during layer object creation.
Previously it was set in layer enable functions, although it is too late
as setting layer format depends on layer mode, and should be done before
given layer enabled.
Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkainen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416-dp-live-fmt-v4-1-c7f379b7168e@amd.com
|
|
Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204090852.1650-9-tzimmermann@suse.de
|
|
Use the fbdev emulation that is optimized for DMA helpers. Avoids
possible shadow buffering and makes the code simpler.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230313155138.20584-23-tzimmermann@suse.de
|
|
Move the generic fbdev implementation into its own source and header
file. Adapt drivers. No functional changes, but some of the internal
helpers have been renamed to fit into the drm_fbdev_ naming scheme.
v3:
* rename drm_fbdev.{c,h} to drm_fbdev_generic.{c,h}
* rebase onto vmwgfx changes
* rebase onto xlnx changes
* fix include statements in amdgpu
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-22-tzimmermann@suse.de
|
|
Add a mode parameter to the zynqmp_disp_layer_enable() to set the layer
mode, to prepare for live mode support.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The better convey its purpose, rename the zynqmp_dpsub_handle_vblank()
function that belongs to the DRM layer to
zynqmp_dpsub_drm_handle_vblank().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
To complete the decoupling of the DRM device from the zynqmp_dpsub,
group all DRM-related structures in a zynqmp_dpsub_drm structure and
allocate it separately from the zynqmp_dpsub. The DRM managed allocation
of the drm_device now doesn't cover the zynqmp_dpsub anymore, so we need
to register a cleanup action to release the zynqmp_dpsub when the
drm_device is released.
The will allow usage of the DisplayPort encoder as a standalone bridge,
without registering a DRM device in this driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Continue the isolation of DRM/KMS code by moving all DRM init and
cleanup from zynqmp_dpsub.c to zynqmp_kms.c.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
There's no need to delay bridge initialization, move it to
zynqmp_dp_probe() and drop the zynqmp_dp_drm_init() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Decouple the planes handling from the display controller programming by
moving the corresponding code from zynqmp_disp.c to zynqmp_kms.c. This
prepares for using the DPSUB with a live video input, without creating
DRM planes in the DPSUB driver.
While at it, fix a typo in a comment.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Decouple the CRTC handling from the display controller programming by
moving the corresponding code from zynqmp_disp.c to zynqmp_kms.c. This
prepares for using the DPSUB with a live video input, without creating a
DRM CRTC in the DPSUB driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Start preparation for using the DPSUB as a standalone DisplayPort
encoder without a display controller by moving the DRM/KMS
initialization to a new zynqmp_kms.c file. No functional change
intended.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
