summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/xlnx
AgeCommit message (Collapse)Author
16 hoursMerge tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernelHEADmasterLinus Torvalds
Pull drm updates from Dave Airlie: "Highlights: - Intel xe enable Panthor Lake, started adding WildCat Lake - amdgpu has a bunch of reset improvments along with the usual IP updates - msm got VM_BIND support which is important for vulkan sparse memory - more drm_panic users - gpusvm common code to handle a bunch of core SVM work outside drivers. Detail summary: Changes outside drm subdirectory: - 'shrink_shmem_memory()' for better shmem/hibernate interaction - Rust support infrastructure: - make ETIMEDOUT available - add size constants up to SZ_2G - add DMA coherent allocation bindings - mtd driver for Intel GPU non-volatile storage - i2c designware quirk for Intel xe core: - atomic helpers: tune enable/disable sequences - add task info to wedge API - refactor EDID quirks - connector: move HDR sink to drm_display_info - fourcc: half-float and 32-bit float formats - mode_config: pass format info to simplify dma-buf: - heaps: Give CMA heap a stable name ci: - add device tree validation and kunit displayport: - change AUX DPCD access probe address - add quirk for DPCD probe - add panel replay definitions - backlight control helpers fbdev: - make CONFIG_FIRMWARE_EDID available on all arches fence: - fix UAF issues format-helper: - improve tests gpusvm: - introduce devmem only flag for allocation - add timeslicing support to GPU SVM ttm: - improve eviction sched: - tracing improvements - kunit improvements - memory leak fixes - reset handling improvements color mgmt: - add hardware gamma LUT handling helpers bridge: - add destroy hook - switch to reference counted drm_bridge allocations - tc358767: convert to devm_drm_bridge_alloc - improve CEC handling panel: - switch to reference counter drm_panel allocations - fwnode panel lookup - Huiling hl055fhv028c support - Raspberry Pi 7" 720x1280 support - edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK - simple: AUO P238HAN01 - st7701: Winstar wf40eswaa6mnn0 - visionox: rm69299-shift - Renesas R61307, Renesas R69328 support - DJN HX83112B hdmi: - add CEC handling - YUV420 output support xe: - WildCat Lake support - Enable PanthorLake by default - mark BMG as SRIOV capable - update firmware recommendations - Expose media OA units - aux-bux support for non-volatile memory - MTD intel-dg driver for non-volatile memory - Expose fan control and voltage regulator in sysfs - restructure migration for multi-device - Restore GuC submit UAF fix - make GEM shrinker drm managed - SRIOV VF Post-migration recovery of GGTT nodes - W/A additions/reworks - Prefetch support for svm ranges - Don't allocate managed BO for each policy change - HWMON fixes for BMG - Create LRC BO without VM - PCI ID updates - make SLPC debugfs files optional - rework eviction rejection of bound external BOs - consolidate PAT programming logic for pre/post Xe2 - init changes for flicker-free boot - Enable GuC Dynamic Inhibit Context switch i915: - drm_panic support for i915/xe - initial flip queue off by default for LNL/PNL - Wildcat Lake Display support - Support for DSC fractional link bpp - Support for simultaneous Panel Replay and Adaptive sync - Support for PTL+ double buffer LUT - initial PIPEDMC event handling - drm_panel_follower support - DPLL interface renames - allocate struct intel_display dynamically - flip queue preperation - abstract DRAM detection better - avoid GuC scheduling stalls - remove DG1 force probe requirement - fix MEI interrupt handler on RT kernels - use backlight control helpers for eDP - more shared display code refactoring amdgpu: - add userq slot to INFO ioctl - SR-IOV hibernation support - Suspend improvements - Backlight improvements - Use scaling for non-native eDP modes - cleaner shader updates for GC 9.x - Remove fence slab - SDMA fw checks for userq support - RAS updates - DMCUB updates - DP tunneling fixes - Display idle D3 support - Per queue reset improvements - initial smartmux support amdkfd: - enable KFD on loongarch - mtype fix for ext coherent system memory radeon: - CS validation additional GL extensions - drop console lock during suspend/resume - bump driver version msm: - VM BIND support - CI: infrastructure updates - UBWC single source of truth - decouple GPU and KMS support - DP: rework I/O accessors - DPU: SM8750 support - DSI: SM8750 support - GPU: X1-45 support and speedbin support for X1-85 - MDSS: SM8750 support nova: - register! macro improvements - DMA object abstraction - VBIOS parser + fwsec lookup - sysmem flush page support - falcon: generic falcon boot code and HAL - FWSEC-FRTS: fb setup and load/execute ivpu: - Add Wildcat Lake support - Add turbo flag ast: - improve hardware generations implementation imx: - IMX8qxq Display Controller support lima: - Rockchip RK3528 GPU support nouveau: - fence handling cleanup panfrost: - MT8370 support - bo labeling - 64-bit register access qaic: - add RAS support rockchip: - convert inno_hdmi to a bridge rz-du: - add RZ/V2H(P) support - MIPI-DSI DCS support sitronix: - ST7567 support sun4i: - add H616 support tidss: - add TI AM62L support - AM65x OLDI bridge support bochs: - drm panic support vkms: - YUV and R* format support - use faux device vmwgfx: - fence improvements hyperv: - move out of simple - add drm_panic support" * tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits) drm/tidss: oldi: convert to devm_drm_bridge_alloc() API drm/tidss: encoder: convert to devm_drm_bridge_alloc() drm/amdgpu: move reset support type checks into the caller drm/amdgpu/sdma7: re-emit unprocessed state on ring reset drm/amdgpu/sdma6: re-emit unprocessed state on ring reset drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset drm/amdgpu/sdma5: re-emit unprocessed state on ring reset drm/amdgpu/gfx12: re-emit unprocessed state on ring reset drm/amdgpu/gfx11: re-emit unprocessed state on ring reset drm/amdgpu/gfx10: re-emit unprocessed state on ring reset drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset drm/amdgpu: Add WARN_ON to the resource clear function drm/amd/pm: Use cached metrics data on SMUv13.0.6 drm/amd/pm: Use cached data for min/max clocks gpu: nova-core: fix bounds check in PmuLookupTableEntry::new drm/amdgpu: Replace HQD terminology with slots naming drm/amdgpu: Add user queue instance count in HW IP info drm/amd/amdgpu: Add helper functions for isp buffers drm/amd/amdgpu: Initialize swnode for ISP MFD device ...
2025-07-16drm: Pass the format info to .fb_create()Ville Syrjälä
Pass along the format information from the top to .fb_create() so that we can avoid redundant (and somewhat expensive) lookups in the drivers. Done with cocci (with some manual fixups): @@ identifier func =~ ".*create.*"; identifier dev, file, mode_cmd; @@ struct drm_framebuffer *func( struct drm_device *dev, struct drm_file *file, + const struct drm_format_info *info, const struct drm_mode_fb_cmd2 *mode_cmd) { ... ( - const struct drm_format_info *info = drm_get_format_info(...); | - const struct drm_format_info *info; ... - info = drm_get_format_info(...); ) <... - if (!info) - return ...; ...> } @@ identifier func =~ ".*create.*"; identifier dev, file, mode_cmd; @@ struct drm_framebuffer *func( struct drm_device *dev, struct drm_file *file, + const struct drm_format_info *info, const struct drm_mode_fb_cmd2 *mode_cmd) { ... } @find@ identifier fb_create_func =~ ".*create.*"; identifier dev, file, mode_cmd; @@ struct drm_framebuffer *fb_create_func( struct drm_device *dev, struct drm_file *file, + const struct drm_format_info *info, const struct drm_mode_fb_cmd2 *mode_cmd); @@ identifier find.fb_create_func; expression dev, file, mode_cmd; @@ fb_create_func(dev, file + ,info ,mode_cmd) @@ expression dev, file, mode_cmd; @@ drm_gem_fb_create(dev, file + ,info ,mode_cmd) @@ expression dev, file, mode_cmd; @@ drm_gem_fb_create_with_dirty(dev, file + ,info ,mode_cmd) @@ expression dev, file_priv, mode_cmd; identifier info, fb; @@ info = drm_get_format_info(...); ... fb = dev->mode_config.funcs->fb_create(dev, file_priv + ,info ,mode_cmd); @@ identifier dev, file_priv, mode_cmd; @@ struct drm_mode_config_funcs { ... struct drm_framebuffer *(*fb_create)(struct drm_device *dev, struct drm_file *file_priv, + const struct drm_format_info *info, const struct drm_mode_fb_cmd2 *mode_cmd); ... }; v2: Fix kernel docs (Laurent) Fix commit msg (Geert) Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Inki Dae <inki.dae@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Rob Clark <robdclark@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <lumag@kernel.org> Cc: Sean Paul <sean@poorly.run> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Agner <stefan@agner.ch> Cc: Lyude Paul <lyude@redhat.com> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: Biju Das <biju.das.jz@bp.renesas.com> Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Cc: Andy Yan <andy.yan@rock-chips.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Mikko Perttunen <mperttunen@nvidia.com> Cc: Dave Stevenson <dave.stevenson@raspberrypi.com> Cc: "Maíra Canal" <mcanal@igalia.com> Cc: Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com> Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com> Cc: Gurchetan Singh <gurchetansingh@chromium.org> Cc: Chia-I Wu <olvaffe@gmail.com> Cc: Zack Rusin <zack.rusin@broadcom.com> Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com> Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Cc: amd-gfx@lists.freedesktop.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: virtualization@lists.linux.dev Cc: spice-devel@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-5-ville.syrjala@linux.intel.com
2025-07-14drm/bridge: Pass down connector to drm bridge detect hookAndy Yan
In some application scenarios, we hope to get the corresponding connector when the bridge's detect hook is invoked. In most cases, we can get the connector by drm_atomic_get_connector_for_encoder if the encoder attached to the bridge is enabled, however there will still be some scenarios where the detect hook of the bridge is called but the corresponding encoder has not been enabled yet. For instance, this occurs when the device is hot plug in for the first time. Since the call to bridge's detect is initiated by the connector, passing down the corresponding connector directly will make things simpler. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250703125027.311109-3-andyshrk@163.com [DB: added the chunk to the cdn-dp driver] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-07-09zynqmp: don't bother with debugfs_file_{get,put}() in proxied fopsAl Viro
When debugfs file has been created by debugfs_create_file_unsafe(), we do need the file_operations methods to use debugfs_file_{get,put}() to prevent concurrent removal; for files created by debugfs_create_file() that is done in the wrappers that call underlying methods, so there's no point whatsoever duplicating that in the underlying methods themselves. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Link: https://lore.kernel.org/r/20250702211408.GA3406663@ZenIV Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-21drm: zynqmp_dp: convert to devm_drm_bridge_alloc() APILuca Ceresoli
This is the new API for allocating DRM bridges. This driver has a peculiar structure. zynqmp_dpsub.c is the actual driver, which delegates to a submodule (zynqmp_dp.c) the allocation of a sub-structure embedding the drm_bridge and its initialization, however it does not delegate the drm_bridge_add(). Hence, following carefully the code flow, it is correct to change the allocation function and .funcs assignment in the submodule, while the drm_bridge_add() is not in that submodule. Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20250509-drm-bridge-convert-to-alloc-api-v3-17-b8bc1f16d7aa@bootlin.com Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
2025-04-16gpu: drm: xlnx: zynqmp_dp: Use dev_err_probe()Zhang Enpei
Replace the open-code with dev_err_probe() to simplify the code. Signed-off-by: Zhang Enpei <zhang.enpei@zte.com.cn> Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20250402193852834atJ7eho66TlnKOIMSvpfr@zte.com.cn Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
2025-04-16drm: xlnx: zynqmp_dpsub: use snd_soc_dummy_dlcKuninori Morimoto
struct zynqmp_dp_audio :: components has codec component, but it is used as dummy DAI. OTOH, We can use common snd_soc_dummy_dlc. Let's use common dummy_dlc instead of own component. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://lore.kernel.org/r/87ecxvr25o.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
2025-03-20drm/bridge: Add encoder parameter to drm_bridge_funcs.attachMaxime Ripard
The drm_bridge structure contains an encoder pointer that is widely used by bridge drivers. This pattern is largely documented as deprecated in other KMS entities for atomic drivers. However, one of the main use of that pointer is done in attach to just call drm_bridge_attach on the next bridge to add it to the bridge list. While this dereferences the bridge->encoder pointer, it's effectively the same encoder the bridge was being attached to. We can make it more explicit by adding the encoder the bridge is attached to to the list of attach parameters. This also removes the need to dereference bridge->encoder in most drivers. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250313-bridge-connector-v6-1-511c54a604fb@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-03-12drm: xlnx: zynqmp_dpsub: fix Kconfig dependencies for ASoCArnd Bergmann
The new audio code fails to build when sounds support is in a loadable module but the GPU driver is built-in: x86_64-linux-ld: zynqmp_dp_audio.c:(.text+0x6a8): undefined reference to `devm_snd_soc_register_card' x86_64-linux-ld: drivers/gpu/drm/xlnx/zynqmp_dp_audio.o:(.rodata+0x1bc): undefined reference to `snd_soc_info_volsw' x86_64-linux-ld: drivers/gpu/drm/xlnx/zynqmp_dp_audio.o:(.rodata+0x1f0): undefined reference to `snd_soc_get_volsw' x86_64-linux-ld: drivers/gpu/drm/xlnx/zynqmp_dp_audio.o:(.rodata+0x1f4): undefined reference to `snd_soc_put_volsw' Change the Kconfig dependency to disallow the sound support in this configuration. Fixes: 3ec5c1579305 ("drm: xlnx: zynqmp_dpsub: Add DP audio support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250227132036.1136600-1-arnd@kernel.org
2025-02-19drm/bridge: Pass full state to atomic_disableMaxime Ripard
It's pretty inconvenient to access the full atomic state from drm_bridges, so let's change the atomic_disable hook prototype to pass it directly. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-4-e71598f49c8f@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-02-19drm/bridge: Pass full state to atomic_enableMaxime Ripard
It's pretty inconvenient to access the full atomic state from drm_bridges, so let's change the atomic_enable hook prototype to pass it directly. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-3-e71598f49c8f@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-02-12drm: zynqmp_dp: Use devm_platform_ioremap_resource_byname()Jinjie Ruan
platform_get_resource_byname() and devm_ioremap_resource() can be replaced by devm_platform_ioremap_resource_byname(), which can simplify the code logic a bit, No functional change here. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240828084929.2527228-1-ruanjinjie@huawei.com
2025-02-12drm: zynqmp_dp: Use scope-based mutex helpersSean Anderson
Convert most mutex_(un)lock calls to use (scoped_)guard instead. This generally reduces line count and prevents bugs like forgetting to unlock the mutex. I've left traditional calls in a few places where scoped helpers would be more verbose. This mostly happens where debugfs_file_put needs to be called regardless. I looked into defining a CLASS for debugfs_file, but it seems like more effort than it's worth since debugfs_file_get can fail. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250207162528.1651426-3-sean.anderson@linux.dev
2025-02-12drm: zynqmp_dp: Fix a deadlock in zynqmp_dp_ignore_hpd_set()Bart Van Assche
Instead of attempting the same mutex twice, lock and unlock it. This bug has been detected by the Clang thread-safety analyzer. Cc: Sean Anderson <sean.anderson@linux.dev> Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Fixes: 28edaacb821c ("drm: zynqmp_dp: Add debugfs interface for compliance testing") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Sean Anderson <sean.anderson@linux.dev> Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250207162528.1651426-2-sean.anderson@linux.dev
2025-02-11drm: xlnx: zynqmp_dpsub: Add NULL check in zynqmp_audio_initCharles Han
devm_kasprintf() calls can return null pointers on failure. But some return values were not checked in zynqmp_audio_init(). Add NULL check in zynqmp_audio_init(), avoid referencing null pointers in the subsequent code. Fixes: 3ec5c1579305 ("drm: xlnx: zynqmp_dpsub: Add DP audio support") Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Charles Han <hanchunchao@inspur.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250211102049.6468-1-hanchunchao@inspur.com
2025-02-11drm: xlnx: zynqmp: Fix max dma segment sizeTomi Valkeinen
Fix "mapping sg segment longer than device claims to support" warning by setting the max segment size. Fixes: d76271d22694 ("drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem") Reviewed-by: Sean Anderson <sean.anderson@linux.dev> Tested-by: Sean Anderson <sean.anderson@linux.dev> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250115-xilinx-formats-v2-10-160327ca652a@ideasonboard.com
2025-01-24Merge tag 'drm-misc-next-fixes-2025-01-24' of ↵Simona Vetter
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next-fixes for v6.14-rc1: - Fix a serious regression from commit e4b5ccd392b9 ("drm/v3d: Ensure job pointer is set to NULL after job completion") - dmem cgroup Kconfig fix (acked by Tejun) - virtio: uaf in dma_buf free path - xlnx: kerneldoc Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/0d4a18f4-222c-4767-9169-e6350ce8fea5@linux.intel.com
2025-01-24Merge tag 'drm-misc-fixes-2025-01-24' of ↵Simona Vetter
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next Short summary of fixes pull: bochs: - Fix double-free on driver removal client: - Improve support for tile-based modes - Fix fbdev Kconfig select rules xlnx: - zynqmp_dp: Add locking to DP-bridge enable helper Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20250124082932.GA13715@linux.fritz.box
2025-01-24drm: zynqmp_dp: Unlock on error in zynqmp_dp_bridge_atomic_enable()Dan Carpenter
We added some locking to this function, but accidentally forgot to unlock if zynqmp_dp_mode_configure() failed. Use a guard lock to fix it. Fixes: a7d5eeaa57d7 ("drm: zynqmp_dp: Add locking") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/b4042bd9-c943-4738-a2e1-8647259137c6@stanley.mountain
2025-01-16drm: xlnx: zynqmp_dpsub: Fix kernel docTomi Valkeinen
Fix two kernel doc warnings introduced by the recent DP audio patch: - Add a doc line for the new "audio" field - Remove a reference to zynqmp_dpsub.c from zynqmp.rst, as the .c file no longer has structured comments Fixes: 3ec5c1579305 ("drm: xlnx: zynqmp_dpsub: Add DP audio support") Closes: https://lore.kernel.org/all/20241220154208.720d990b@canb.auug.org.au/ Reviewed-by: Vishal Sagar <vishal.sagar@amd.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241220-xilinx-dp-audio-doc-fix-v1-1-cc488996e463@ideasonboard.com (cherry picked from commit 96b5d2e807f667320c66f41ddc1c473023a73ab2) Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-12-19drm: xlnx: zynqmp_dpsub: Add DP audio supportTomi Valkeinen
Add basic DisplayPort audio support. Support non-live audio playback from two PCMs (DMA channels), and the volume control in the audio mixer. As older dtb files may not have the audio DMA channels defined, the driver will just mark the audio support as disabled if the audio DMA is missing, and will continue with only display support. Note: Reset doesn't seem to work (ZYNQMP_DISP_AUD_SOFT_RESET). If we do a reset, audio playback won't start again even if, afaics, we do set up all the necessary registers. So, at the moment, resetting the audio block in dp_dai_hw_free() is commented out. Tested-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com> Reviewed-by: Vishal Sagar <vishal.sagar@amd.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241023-xilinx-dp-audio-v4-3-5128881457be@ideasonboard.com
2024-12-16drm: zynqmp_dp: Fix integer overflow in zynqmp_dp_rate_get()Karol Przybylski
This patch fixes a potential integer overflow in the zynqmp_dp_rate_get() The issue comes up when the expression drm_dp_bw_code_to_link_rate(dp->test.bw_code) * 10000 is evaluated using 32-bit Now the constant is a compatible 64-bit type. Resolves coverity issues: CID 1636340 and CID 1635811 Cc: stable@vger.kernel.org Fixes: 28edaacb821c ("drm: zynqmp_dp: Add debugfs interface for compliance testing") Signed-off-by: Karol Przybylski <karprzy7@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/stable/20241212095057.1015146-1-karprzy7%40gmail.com Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241215125355.938953-1-karprzy7@gmail.com
2024-12-09Merge remote-tracking branch 'drm/drm-next' into drm-misc-nextMaarten Lankhorst
The v6.13-rc2 release included a bunch of breaking changes, specifically the MODULE_IMPORT_NS commit. Backmerge in order to fix them before the next pull-request. Include the fix from Stephen Roswell. Caused by commit 25c3fd1183c0 ("drm/virtio: Add a helper to map and note the dma addrs and lengths") Interacting with commit cdd30ebb1b9f ("module: Convert symbol namespace to string literal") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Link: https://patchwork.freedesktop.org/patch/msgid/20241209121717.2abe8026@canb.auug.org.au Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
2024-12-05drm: remove driver date from struct drm_driver and all driversJani Nikula
We stopped using the driver initialized date in commit 7fb8af6798e8 ("drm: deprecate driver date") and (eventually) started returning "0" for drm_version ioctl instead. Finish the job, and remove the unused date member from struct drm_driver, its initialization from drivers, along with the common DRIVER_DATE macros. v2: Also update drivers/accel (kernel test robot) Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Simon Ser <contact@emersion.fr> Acked-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1f2bf2543aed270a06f6c707fd6ed1b78bf16712.1733322525.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-12-01Get rid of 'remove_new' relic from platform driver structLinus Torvalds
The continual trickle of small conversion patches is grating on me, and is really not helping. Just get rid of the 'remove_new' member function, which is just an alias for the plain 'remove', and had a comment to that effect: /* * .remove_new() is a relic from a prototype conversion of .remove(). * New drivers are supposed to implement .remove(). Once all drivers are * converted to not use .remove_new any more, it will be dropped. */ This was just a tree-wide 'sed' script that replaced '.remove_new' with '.remove', with some care taken to turn a subsequent tab into two tabs to make things line up. I did do some minimal manual whitespace adjustment for places that used spaces to line things up. Then I just removed the old (sic) .remove_new member function, and this is the end result. No more unnecessary conversion noise. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-11-15drm/client: Move public client header to clients/ subdirectoryThomas Zimmermann
Move the public header file drm_client_setup.h to the clients/ subdirectory and update all drivers. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241108154600.126162-3-tzimmermann@suse.de
2024-10-30drm: xlnx: zynqmp_dpsub: fix hotplug detectionSteffen Dirkwinkel
drm_kms_helper_poll_init needs to be called after zynqmp_dpsub_kms_init. zynqmp_dpsub_kms_init creates the connector and without it we don't enable hotplug detection. Fixes: eb2d64bfcc17 ("drm: xlnx: zynqmp_dpsub: Report HPD through the bridge") Cc: stable@vger.kernel.org Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241028134218.54727-1-lists@steffen.cc
2024-10-30drm: xlnx: zynqmp_disp: layer may be null while releasingSteffen Dirkwinkel
layer->info can be null if we have an error on the first layer in zynqmp_disp_create_layers Fixes: 1836fd5ed98d ("drm: xlnx: zynqmp_dpsub: Minimize usage of global flag") Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241028133941.54264-1-lists@steffen.cc
2024-10-30drm: zynqmp_dp: Add debugfs interface for compliance testingSean Anderson
Add a debugfs interface for exercising the various test modes supported by the DisplayPort controller. This allows performing compliance testing, or performing signal integrity measurements on a failing link. At the moment, we do not support sink-driven link quality testing, although such support would be fairly easy to add. Additionally, add some debugfs files for ignoring AUX errors and HPD events, as this can allow testing with equipment that cannot emulate a DPRX. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> [Tomi: fixed a few minor formatting issues] Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-9-sean.anderson@linux.dev
2024-10-30drm: zynqmp_dp: Take dp->lock in zynqmp_dp_hpd_work_funcSean Anderson
Add a non-locking version of zynqmp_dp_bridge_detect and use it in zynqmp_dp_hpd_work_func so we can take the lock explicitly. This will make it easier to check for hpd_ignore when we add debugfs support. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-8-sean.anderson@linux.dev
2024-10-30drm: zynqmp_dp: Split off several helper functionsSean Anderson
In preparation for supporting compliance testing, split off several helper functions. No functional change intended. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-7-sean.anderson@linux.dev
2024-10-30drm: zynqmp_dp: Use AUX IRQs instead of pollingSean Anderson
Instead of polling the status register for the AUX status, just enable the IRQs and signal a completion. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-6-sean.anderson@linux.dev
2024-10-30drm: zynqmp_dp: Convert to a hard IRQSean Anderson
Now that all of the sleeping work is done outside of the IRQ, we can convert it to a hard IRQ. Shared IRQs may be triggered even after calling disable_irq, so use free_irq instead which removes our callback altogether. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-5-sean.anderson@linux.dev
2024-10-30drm: zynqmp_dp: Don't retrain the link in our IRQSean Anderson
Retraining the link can take a while, and might involve waiting for DPCD reads/writes to complete. In preparation for unthreading the IRQ handler, move this into its own work function. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-4-sean.anderson@linux.dev
2024-10-30drm: zynqmp_dp: Add lockingSean Anderson
Add some locking to prevent the IRQ/workers/bridge API calls from stepping on each other's toes. This lock protects: - Non-atomic registers configuring the link. That is, everything but the IRQ registers (since these are accessed in an atomic fashion), and the DP AUX registers (since these don't affect the link). We also access AUX while holding this lock, so it would be very tricky to support. - Link configuration. This is effectively everything in zynqmp_dp which isn't read-only after probe time. So from next_bridge onward. This lock is designed to protect configuration changes so we don't have to do anything tricky. Configuration should never be in the hot path, so I'm not worried about performance. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-3-sean.anderson@linux.dev
2024-10-30drm: zynqmp_kms: Unplug DRM device before removalSean Anderson
Prevent userspace accesses to the DRM device from causing use-after-frees by unplugging the device before we remove it. This causes any further userspace accesses to result in an error without further calls into this driver's internals. Fixes: d76271d22694 ("drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem") Closes: https://lore.kernel.org/dri-devel/4d8f4c9b-2efb-4774-9a37-2f257f79b2c9@linux.dev/ Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-2-sean.anderson@linux.dev
2024-09-26drm/xlnx: Run DRM default client setupThomas Zimmermann
Call drm_client_setup_with_fourcc() to run the kernel's default client setup for DRM. Set fbdev_probe in struct drm_driver, so that the client setup can start the common fbdev client. v5: - select DRM_CLIENT_SELECTION v2: - use drm_client_setup_with_fourcc() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Cc: Michal Simek <michal.simek@amd.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-48-tzimmermann@suse.de
2024-09-03drm/bridge-connector: move to DRM_DISPLAY_HELPER moduleDmitry Baryshkov
drm_bridge_connector is a "leaf" driver, belonging to the display helper, rather than the "CRTC" drm_kms_helper module. Move the driver to the drm/display and add necessary Kconfig selection clauses. Suggested-by: Maxime Ripard <mripard@kernel.org> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-2-daebde6d9857@linaro.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-06-17drm: zynqmp_dp: Don't delay workSean Anderson
We always call scheduled_delayed_work with no delay, so just use a non-delayed work_struct instead. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240503192922.2172314-4-sean.anderson@linux.dev
2024-06-17drm: zynqmp_dp: Rearrange zynqmp_dp for better paddingSean Anderson
Sort the members of struct zynqmp_dp to reduce padding necessary for alignment. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240503192922.2172314-3-sean.anderson@linux.dev
2024-06-17drm: zynqmp_kms: Fix AUX bus not getting unregisteredSean Anderson
drm_encoder_cleanup is responsible for calling drm_bridge_detach for each bridge attached to the encoder. zynqmp_dp_bridge_detach is in turn responsible for unregistering the AUX bus. However, we never ended up calling drm_encoder_cleanup in the remove or error paths, so the AUX bus would stick around after the rest of the driver had been removed. I don't really understand why drm_mode_config_cleanup doesn't call drm_encoder_cleanup for us. It will call destroy (which for simple_encoder is drm_encoder_cleanup) on encoders in the mode_config's encoder_list. Should drm_encoder_cleanup get called before or after drm_atomic_helper_shutdown? Fixes: 2dfd045c8435 ("drm: xlnx: zynqmp_dpsub: Register AUX bus at bridge attach time") Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240503192922.2172314-2-sean.anderson@linux.dev
2024-06-17drm: xlnx: zynqmp_dpsub: Enable plane in atomic updateAnatoliy Klymenko
Unconditionally enable the DPSUB layer in the corresponding atomic plane update callback. Setting the new display mode may require disabling and re-enabling the CRTC. This effectively resets DPSUB to the default state with all layers disabled. The original implementation of the plane atomic update enables the corresponding DPSUB layer only if the framebuffer format has changed. This would leave the layer disabled after switching to a different display mode with the same framebuffer format. Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240523-dp-layer-enable-v2-1-d799020098fc@amd.com
2024-06-17drm: zynqmp_dpsub: Fix an error handling path in zynqmp_dpsub_probe()Christophe JAILLET
If zynqmp_dpsub_drm_init() fails, we must undo the previous drm_bridge_add() call. Fixes: be3f3042391d ("drm: zynqmp_dpsub: Always register bridge") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Sean Anderson <sean.anderso@linux.dev> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/974d1b062d7c61ee6db00d16fa7c69aa1218ee02.1716198025.git.christophe.jaillet@wanadoo.fr
2024-05-27Merge drm/drm-next into drm-misc-nextMaxime Ripard
Let's start the new release cycle. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-05-08drm: xlnx: zynqmp_dpsub: Fix compilation errorAnatoliy Klymenko
Fix W=1 clang 19 compilation error in zynqmp_disp_layer_drm_formats(). Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202404260946.4oZXvHD2-lkp@intel.com/ Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Fixes: b0f0469ab662 ("drm: xlnx: zynqmp_dpsub: Anounce supported input formats") Link: https://patchwork.freedesktop.org/patch/msgid/20240426-dp-live-fmt-fix-v3-2-e904b5ae51d7@amd.com (cherry picked from commit c72211751870ffa2cff5d91834059456cfa7cbd5) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2024-05-08drm: xlnx: zynqmp_dpsub: Fix few function commentsAnatoliy Klymenko
Fix arguments description for zynqmp_disp_layer_find_live_format() and zynqmp_disp_layer_set_live_format(). Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202404260616.KFGDpCDN-lkp@intel.com/ Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Fixes: 1b5151bd3a2e ("drm: xlnx: zynqmp_dpsub: Set input live format") Link: https://patchwork.freedesktop.org/patch/msgid/20240426-dp-live-fmt-fix-v3-1-e904b5ae51d7@amd.com (cherry picked from commit 87f36e03c0f1d69245ad295309418e982c88fbe7) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2024-05-02drm: zynqmp_dpsub: Always register bridgeSean Anderson
We must always register the DRM bridge, since zynqmp_dp_hpd_work_func calls drm_bridge_hpd_notify, which in turn expects hpd_mutex to be initialized. We do this before zynqmp_dpsub_drm_init since that calls drm_bridge_attach. This fixes the following lockdep warning: [ 19.217084] ------------[ cut here ]------------ [ 19.227530] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ 19.227768] WARNING: CPU: 0 PID: 140 at kernel/locking/mutex.c:582 __mutex_lock+0x4bc/0x550 [ 19.241696] Modules linked in: [ 19.244937] CPU: 0 PID: 140 Comm: kworker/0:4 Not tainted 6.6.20+ #96 [ 19.252046] Hardware name: xlnx,zynqmp (DT) [ 19.256421] Workqueue: events zynqmp_dp_hpd_work_func [ 19.261795] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 19.269104] pc : __mutex_lock+0x4bc/0x550 [ 19.273364] lr : __mutex_lock+0x4bc/0x550 [ 19.277592] sp : ffffffc085c5bbe0 [ 19.281066] x29: ffffffc085c5bbe0 x28: 0000000000000000 x27: ffffff88009417f8 [ 19.288624] x26: ffffff8800941788 x25: ffffff8800020008 x24: ffffffc082aa3000 [ 19.296227] x23: ffffffc080d90e3c x22: 0000000000000002 x21: 0000000000000000 [ 19.303744] x20: 0000000000000000 x19: ffffff88002f5210 x18: 0000000000000000 [ 19.311295] x17: 6c707369642e3030 x16: 3030613464662072 x15: 0720072007200720 [ 19.318922] x14: 0000000000000000 x13: 284e4f5f4e524157 x12: 0000000000000001 [ 19.326442] x11: 0001ffc085c5b940 x10: 0001ff88003f388b x9 : 0001ff88003f3888 [ 19.334003] x8 : 0001ff88003f3888 x7 : 0000000000000000 x6 : 0000000000000000 [ 19.341537] x5 : 0000000000000000 x4 : 0000000000001668 x3 : 0000000000000000 [ 19.349054] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffff88003f3880 [ 19.356581] Call trace: [ 19.359160] __mutex_lock+0x4bc/0x550 [ 19.363032] mutex_lock_nested+0x24/0x30 [ 19.367187] drm_bridge_hpd_notify+0x2c/0x6c [ 19.371698] zynqmp_dp_hpd_work_func+0x44/0x54 [ 19.376364] process_one_work+0x3ac/0x988 [ 19.380660] worker_thread+0x398/0x694 [ 19.384736] kthread+0x1bc/0x1c0 [ 19.388241] ret_from_fork+0x10/0x20 [ 19.392031] irq event stamp: 183 [ 19.395450] hardirqs last enabled at (183): [<ffffffc0800b9278>] finish_task_switch.isra.0+0xa8/0x2d4 [ 19.405140] hardirqs last disabled at (182): [<ffffffc081ad3754>] __schedule+0x714/0xd04 [ 19.413612] softirqs last enabled at (114): [<ffffffc080133de8>] srcu_invoke_callbacks+0x158/0x23c [ 19.423128] softirqs last disabled at (110): [<ffffffc080133de8>] srcu_invoke_callbacks+0x158/0x23c [ 19.432614] ---[ end trace 0000000000000000 ]--- Fixes: eb2d64bfcc17 ("drm: xlnx: zynqmp_dpsub: Report HPD through the bridge") Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240308204741.3631919-1-sean.anderson@linux.dev (cherry picked from commit 61ba791c4a7a09a370c45b70a81b8c7d4cf6b2ae) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2024-05-02Revert "drm: Switch DRM_DISPLAY_HELPER to depends on"Geert Uytterhoeven
This reverts commit e075e496f516bf92bc0cbaf94d64e8d4a6b58321, as helper code should always be selected by the driver that needs it, for the convenience of the final user configuring a kernel. The user who configures a kernel should not need to know which helpers are needed for the driver he is interested in. Making a driver depend on helper code means that the user needs to know which helpers to enable first, which is very user-unfriendly. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://patchwork.freedesktop.org/patch/msgid/1ba76cc4d96a8afefff5d1bc42fb1e1329c5da68.1713780345.git.geert+renesas@glider.be Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-05-02Revert "drm: Switch DRM_DISPLAY_DP_HELPER to depends on"Geert Uytterhoeven
This reverts commit 0323287de87d7e6e9c22c57d7440aa353a2298d0, as helper code should always be selected by the driver that needs it, for the convenience of the final user configuring a kernel. The user who configures a kernel should not need to know which helpers are needed for the driver he is interested in. Making a driver depend on helper code means that the user needs to know which helpers to enable first, which is very user-unfriendly. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://patchwork.freedesktop.org/patch/msgid/89ac456805746b6d0c888f10c5120b11aacd3319.1713780345.git.geert+renesas@glider.be Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-04-27drm: xlnx: zynqmp_dpsub: Fix compilation errorAnatoliy Klymenko
Fix W=1 clang 19 compilation error in zynqmp_disp_layer_drm_formats(). Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202404260946.4oZXvHD2-lkp@intel.com/ Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240426-dp-live-fmt-fix-v3-2-e904b5ae51d7@amd.com
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 18:55:16 +0000