Age | Commit message (Collapse) | Author |
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Driver Changes:
Fixes/improvements/new stuff:
- Avoid GuC scheduling stalls [guc] (Julia Filipchuk)
- Remove force_probe requirement for DG1 (Ville Syrjälä)
- Handle errors correctly to avoid losing GuC-2-Host messages [guc] (Jesus Narvaez)
- Avoid double wakeref put if GuC context deregister failed [guc] (Jesus Narvaez)
- Avoid timeline memory leak with signals and legacy platforms [ringbuf] (Janusz Krzysztofik)
- Fix MEI (discrete) interrupt handler on RT kernels [gsc] (Junxiao Chang)
Miscellaneous:
- Allow larger memory allocation [selftest] (Mikolaj Wasiak)
- Use provided dma_fence_is_chain (Tvrtko Ursulin)
- Fix build error with GCOV and AutoFDO enabled [pmu] (Tzung-Bi Shih)
- Fix build error some more (Arnd Bergmann)
- Reduce stack usage in igt_vma_pin1() (Arnd Bergmann)
- Move out engine related macros from i915_drv.h (Krzysztof Karas)
- Move GEM_QUIRK_PIN_SWIZZLED_PAGES to i915_gem.h (Krzysztof Karas)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tursulin@igalia.com>
Link: https://lore.kernel.org/r/aGTjUBeOQFw26bRT@linux
|
|
Move this macro where other GEM_* definitions live.
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/all/ca83a9d8aa86bb92de84c31fd075e92a61f78895.1750251040.git.krzysztof.karas@intel.com
|
|
Move macros related to engines out of i915_drv.h header and
place them in intel_engine.h.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/9b9ed5bbdb37470fa679c5baf961424c9cfbad11.1750251040.git.krzysztof.karas@intel.com
|
|
Allocate struct drm_info dynamically, and convert the struct
drm_i915_private and struct xe_device dram_info member into a const
pointer. Move the struct definition to intel_dram.h, and keep it opaque
to everyone not needing it. This also removes the duplication of the
struct definition.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://lore.kernel.org/r/73625095157346ea0e8614108c9b369208e5df66.1748337870.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
With SBI under display, also move sbi_lock to display->sbi.lock.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/838fa712fc8a691a3f9427e5f4ed551bd1c62c49.1748343520.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Make i915->display pointer opaque to most of core i915 driver. Lots of
places now need explicit include of intel_display_core.h, or a more
specific header.
With this dependency broken, changes in display should cause radically
less recompilation of i915.
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://lore.kernel.org/r/b381b59acb7e4f600e0282935a68aedf77768109.1747907216.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Allocate struct intel_display dynamically in
intel_display_device_probe() and free in intel_display_device_remove().
v2: Remove duplicate intel_display_device_remove() on error path (Lucas)
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/8cd526a177061cddf71db59bd0901bd1a24e77be.1747907216.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
As the first step towards making struct intel_display an opaque pointer
in i915 and xe drivers, convert the struct drm_i915_private and struct
xe_device display members into pointers.
Initially, add temporary struct intel_display __display members, and
point display at it to avoid dynamic allocation. In the future, we can
drop this, and switch to dynamic allocation.
The conversion is done simply with sed:
sed -i 's/&\([a-zA-Z0-9_>.-]*\)\(dev_priv\|i915\|xe\)->display\([^.]\)/\1\2->display\3/g' \
$(git ls-files -- drivers/gpu/drm/i915 drivers/gpu/drm/xe)
sed -i 's/\(dev_priv\|i915\|xe\)->display\./\1->display->/g' \
$(git ls-files -- drivers/gpu/drm/i915 drivers/gpu/drm/xe)
With a couple of manual tweaks on top.
v2: Initialize i915->display also in selftest mock_gem_device()
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250507152254.2398934-1-jani.nikula@intel.com
|
|
Add some extra paranoia to check correct use of the VLV IOSF SB
get/put/read/write.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/be6f029adf7148198821e5fe01dcf5d5406aa1fe.1747061743.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Observe that i915->irq_lock is no longer used to protect anything
outside of display. Make it a display thing.
This allows us to remove the ugly #define irq_lock irq.lock hack from xe
compat header.
Note that this is slightly more subtle than it first looks. For i915,
there's no functional change here. The lock is moved. However, for xe,
we'll now have *two* locks, xe->irq.lock and display->irq.lock. These
should protect different things, though. Indeed, nesting in the past
would've lead to a deadlock because they were the same lock.
With the i915 references gone, we can make a handful more files
independent of i915_drv.h.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/6d8d2ce0f34a9c7361a5e2fcf96bb32a34c57e76.1746536745.git.jani.nikula@intel.com
[Jani: Fixed a comment while applying.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
We no longer need i915_drv.h in intel_pch.c, and we no longer need
intel_pch.h universally.
With intel_pch.h being included from intel_display_core.h, it's still
included pretty much everywhere, but there's no need to include it
explicitly from i915_drv.h or xe_device_types.h.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/68ec70f6880b7af19bc93b9817959299634a555d.1744364975.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Now that intel_pch lives under display, let's begin its
conversion towards struct intel_display.
Move the pch_type to inside intel_display and convert the
callers.
While doing it, sort intel_display_core.h include list
alphabetically.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/8ffe86eb2a02153e3f866a81fb6dc8a3327a0f25.1744364975.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The only usage of the "PCH" infra is to detect which South Display
Engine we should be using. Move it under display so we can convert
all its callers towards intel_display struct later.
No functional or code change.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/041e3dee494aa15c22172360f2bdd9b15e4acb00.1744364975.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Some new dram types were added without adding the corresponding string
conversion, probably because it's not being used by recent platforms.
Add them, together with a BUILD_BUG_ON() to ensure it keeps in sync, in
preparation to make use of them in recent platforms.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250324-dram-type-v1-1-bf60ef33ac01@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Some SKUs of Xe2_HPD platforms (such as BMG) have GDDR memory type
with ECC enabled. We need to identify this scenario and add a new
case in xelpdp_get_dram_info() to handle it. In addition, the
derating value needs to be adjusted accordingly to compensate for
the limited bandwidth.
Bspec: 64602
Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes: 3adcf970dc7e ("drm/xe/bmg: Drop force_probe requirement")
Cc: stable@vger.kernel.org
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250324-tip-v2-1-38397de319f8@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
With the PCH checks based on PCH types instead of IDs, the i915->pch_id
member has become unused. Remove it.
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fac1c59800128e8f398e83d718a3a5dc235d0526.1738923308.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Introduce DG2_D subplatform for the devices that span across multiple
DG2 subplatforms but are within same segment and will be useful for
segment specific features.
v3: Rework subplatform naming (Jani)
Split subplatform check into separate case (Jani)
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211115952.1659287-3-raag.jadav@intel.com
|
|
Catching up with 6.13-rc2.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Pull drm updates from Dave Airlie:
"There's a lot of rework, the panic helper support is being added to
more drivers, v3d gets support for HW superpages, scheduler
documentation, drm client and video aperture reworks, some new
MAINTAINERS added, amdgpu has the usual lots of IP refactors, Intel
has some Pantherlake enablement and xe is getting some SRIOV bits, but
just lots of stuff everywhere.
core:
- split DSC helpers from DP helpers
- clang build fixes for drm/mm test
- drop simple pipeline support for gem vram
- document submission error signaling
- move drm_rect to drm core module from kms helper
- add default client setup to most drivers
- move to video aperture helpers instead of drm ones
tests:
- new framebuffer tests
ttm:
- remove swapped and pinned BOs from TTM lru
panic:
- fix uninit spinlock
- add ABGR2101010 support
bridge:
- add TI TDP158 support
- use standard PM OPS
dma-fence:
- use read_trylock instead of read_lock to help lockdep
scheduler:
- add errno to sched start to report different errors
- add locking to drm_sched_entity_modify_sched
- improve documentation
xe:
- add drm_line_printer
- lots of refactoring
- Enable Xe2 + PES disaggregation
- add new ARL PCI ID
- SRIOV development work
- fix exec unnecessary implicit fence
- define and parse OA sync props
- forcewake refactoring
i915:
- Enable BMG/LNL ultra joiner
- Enable 10bpx + CCS scanout on ICL+, fp16/CCS on TGL+
- use DSB for plane/color mgmt
- Arrow lake PCI IDs
- lots of i915/xe display refactoring
- enable PXP GuC autoteardown
- Pantherlake (PTL) Xe3 LPD display enablement
- Allow fastset HDR infoframe changes
- write DP source OUI for non-eDP sinks
- share PCI IDs between i915 and xe
amdgpu:
- SDMA queue reset support
- SMU 13.0.6, JPEG 4.0.3 updates
- Initial runtime repartitioning support
- rework IP structs for multiple IP instances
- Fetch EDID from _DDC if available
- SMU13 zero rpm user control
- lots of fixes/cleanups
amdkfd:
- Increase event FIFO size
- add topology cap flag for per queue reset
msm:
- DPU:
- SA8775P support
- (disabled by default) MSM8917, MSM8937, MSM8953 and MSM8996 support
- Enable large framebuffer support
- Drop MSM8998 and SDM845
- DP:
- SA8775P support
- GPU:
- a7xx preemption support
- Adreno A663 support
ast:
- warn about unsupported TX chips
ivpu:
- add coredump
- add pantherlake support
rockchip:
- 4K@60Hz display enablement
- generate pll programming tables
panthor:
- add timestamp query API
- add realtime group priority
- add fdinfo support
etnaviv:
- improve handling of DMA address limits
- improve GPU hangcheck
exynos:
- Decon Exynos7870 support
mediatek:
- add OF graph support
omap:
- locking fixes
bochs:
- convert to gem/shmem from simpledrm
v3d:
- support big/super pages
- add gemfs
vc4:
- BCM2712 support refactoring
- add YUV444 format support
udmabuf:
- folio related fixes
nouveau:
- add panic support on nv50+"
* tag 'drm-next-2024-11-21' of https://gitlab.freedesktop.org/drm/kernel: (1583 commits)
drm/xe/guc: Fix dereference before NULL check
drm/amd: Fix initialization mistake for NBIO 7.7.0
Revert "drm/amd/display: parse umc_info or vram_info based on ASIC"
drm/amd/display: Fix failure to read vram info due to static BP_RESULT
drm/amdgpu: enable GTT fallback handling for dGPUs only
drm/amd/amdgpu: limit single process inside MES
drm/fourcc: add AMD_FMT_MOD_TILE_GFX9_4K_D_X
drm/amdgpu/mes12: correct kiq unmap latency
drm/amdgpu: Support vcn and jpeg error info parsing
drm/amd : Update MES API header file for v11 & v12
drm/amd/amdkfd: add/remove kfd queues on start/stop KFD scheduling
drm/amdkfd: change kfd process kref count at creation
drm/amdgpu: Cleanup shift coding style
drm/amd/amdgpu: Increase MES log buffer to dump mes scratch data
drm/amdgpu: Implement virt req_ras_err_count
drm/amdgpu: VF Query RAS Caps from Host if supported
drm/amdgpu: Add msg handlers for SRIOV RAS Telemetry
drm/amdgpu: Update SRIOV Exchange Headers for RAS Telemetry Support
drm/amd/display: 3.2.309
drm/amd/display: Adjust VSDB parser for replay feature
...
|
|
The intel_display struct already has a place for save/restore
stuff. Move the i915's regfile there since they are only
related to display.
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241113225016.208673-3-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
All MTL and ARL SKUs share the same GSC FW, but the newer platforms are
only supported in newer blobs. In particular, ARL-S is supported
starting from 102.0.10.1878 (which is already the minimum required
version for ARL in the code), while ARL-H and ARL-U are supported from
102.1.15.1926. Therefore, the driver needs to check which specific ARL
subplatform its running on when verifying that the GSC FW is new enough
for it.
Fixes: 2955ae8186c8 ("drm/i915: ARL requires a newer GSC firmware")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028233132.149745-1-daniele.ceraolospurio@intel.com
(cherry picked from commit 3c1d5ced18db8a67251c8436cf9bdc061f972bdb)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
drm/i915 feature pull #2 for v6.13:
Features and functionality:
- Pantherlake (PTL) Xe3 LPD display enabling for xe driver (Clint, Suraj,
Dnyaneshwar, Matt, Gustavo, Radhakrishna, Chaitanya, Haridhar, Juha-Pekka, Ravi)
- Enable dbuf overlap detection on Lunarlake and later (Stanislav, Vinod)
- Allow fastset for HDR infoframe changes (Chaitanya)
- Write DP source OUI also for non-eDP sinks (Imre)
Refactoring and cleanups:
- Independent platform identification for display (Jani)
- Display tracepoint fixes and cleanups (Gustavo)
- Share PCI ID headers between i915 and xe drivers (Jani)
- Use x100 version for full version and release checks (Jani)
- Conversions to struct intel_display (Jani, Ville)
- Reuse DP DPCD and AUX macros in gvt instead of duplication (Jani)
- Use string choice helpers (R Sundar, Sai Teja)
- Remove unused underrun detection irq code (Sai Teja)
- Color management debug improvements and other cleanups (Ville)
- Refactor panel fitter code to a separate file (Ville)
- Use try_cmpxchg() instead of open-coding (Uros Bizjak)
Fixes:
- PSR and Panel Replay fixes and workarounds (Jouni)
- Fix panel power during connector detection (Imre)
- Fix connector detection and modeset races (Imre)
- Fix C20 PHY TX MISC configuration (Gustavo)
- Improve panel fitter validity checks (Ville)
- Fix eDP short HPD interrupt handling while runtime suspended (Imre)
- Propagate DP MST DSC BW overhead/slice calculation errors (Imre)
- Stop hotplug polling for eDP connectors (Imre)
- Workaround panels reporting bad link status after PSR enable (Jouni)
- Panel Replay VRR VSC SDP related workaround and refactor (Animesh, Mitul)
- Fix memory leak on eDP init error path (Shuicheng)
- Fix GVT KVMGT Kconfig dependencies (Arnd Bergmann)
- Fix irq function documentation build warning (Rodrigo)
- Add platform check to power management fuse bit read (Clint)
- Revert kstrdup_const() and kfree_const() usage for clarity (Christophe JAILLET)
- Workaround horizontal odd panning issues in display versions 20 and 30 (Nemesa)
- Fix xe drive HDCP GSC firmware check (Suraj)
Merges:
- Backmerge drm-next to get some KVM changes (Rodrigo)
- Fix a build failure originating from previous backmerge (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# drivers/gpu/drm/i915/display/intel_dp_mst.c
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87h68ni0wd.fsf@intel.com
|
|
All MTL and ARL SKUs share the same GSC FW, but the newer platforms are
only supported in newer blobs. In particular, ARL-S is supported
starting from 102.0.10.1878 (which is already the minimum required
version for ARL in the code), while ARL-H and ARL-U are supported from
102.1.15.1926. Therefore, the driver needs to check which specific ARL
subplatform its running on when verifying that the GSC FW is new enough
for it.
Fixes: 2955ae8186c8 ("drm/i915: ARL requires a newer GSC firmware")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028233132.149745-1-daniele.ceraolospurio@intel.com
|
|
The sideband latency qos request is only used for VLV PUNIT
access. Abstract it better, and also add the request for VLV only.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/92632f64c1256bfafe7ebf49c1ad0618157d9484.1730193891.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The VLV/CHV IOSF sideband is unrelated to pcode. It's just confusing to
piggyback on the same mutex. Add a dedicated lock with init and cleanup
functions.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/31ccbf33c6b6114d0bcb40a2e174f19162d4e177.1730193891.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The LPT/WPT IOSF sideband is unrelated to pcode or VLV/CHV IOSF
sideband. It's just confusing to piggyback on the same mutex. Add a
dedicated lock with init and cleanup functions.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/139933094fe51fccdbe14d4e20df69782e801905.1730193891.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Common display code requires IS_PANTHERLAKE macro.
Define the macro and set 0 as PTL is no longer support for i915.
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028193015.3241858-4-clinton.a.taylor@intel.com
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Driver Changes:
Fixes/improvements/new stuff:
- Enable PXP GuC autoteardown flow [guc] (Juston Li)
- Retry RING_HEAD reset until it get sticks [gt] (Nitin Gote)
- Add basic PMU support for gen2 [pmu] (Ville Syrjälä)
Miscellaneous:
- Prevent a possible int overflow in wq offsets [guc] (Nikita Zhandarovich)
- PMU code cleanups (Lucas De Marchi)
- Fixed "CPU" -> "GPU" typo [gt] (Zhang He)
- Gen2/3 interrupt handling cleanup (Ville Syrjälä)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Zxi-3wkIwI-Y1Qvj@linux
|
|
There aren't many users for the IS_<PLATFORM>_GT<N>() macros, and many
of them are in fact unused. Even among the users, the platform check is
often redundant. Just remove the macros.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930124948.3551980-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
This feature flag enables GuC autoteardown which allows for a grace
period before session teardown.
Also add a HAS_PXP() helper to share with the other place that wants
to check.
Signed-off-by: Juston Li <juston.li@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240906174038.1468026-1-John.C.Harrison@Intel.com
|
|
The .is_lp member of struct intel_device_info and its wrapper IS_LP()
are used to identify just four platforms, VLV/CHV/BXT/GLK. It didn't
become as important as it was perhaps originally planned. Just remove
it, and replace with exact platform identification. In a few places this
becomes slightly verbose, but in many places it improves clarity to
immediately see the exact platforms.
Additionally, this lets us remove the xe compat macro.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930124056.3541988-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
This information is used in many places and it doesn't have
anything to do with runtime_pm directly. Let's move it to
the driver, where it belongs.
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240912172539.418957-2-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Let's kill this legacy iand almost unused rq_enabled version
in favor of the real one that is checked at
intel_irqs_enabled().
The commit 'ac1723c16b66 ("drm/i915: Track IRQ state
in local device state")' shows that this was a legacy
DRM level irq_enabled information that got removed.
But the driver one already existed under a different
name.
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240912172539.418957-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
In the future, the display code shall not have any idea about struct
xe_device or struct drm_i915_private, but will need to get at the struct
drm_device via drvdata. Store the struct drm_device pointer to drvdata
instead of the driver specific pointer.
Avoid passing NULL to container_of() via to_i915()/to_xe_device(). (It
does return NULL for NULL pointers when the offset happens to be 0, but
otherwise returns garbage pointers for NULL.)
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/946805b32e38d4785880cc7857e01e6a309126a9.1724942754.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
ARL and MTL share a single GSC firmware blob. However, ARL requires a
newer version of it.
So add differentiate of the PCI ids for ARL from MTL and create ARL as
a sub-platform of MTL. That way, all the existing workarounds and such
still treat ARL as MTL exactly as before. However, now the GSC code
can check for ARL and do an extra version check on the firmware before
committing to it.
Also, the version extraction code has various ways of failing but the
return code was being ignore and so the firmware load would attempt to
continue anyway. Fix that by propagating the return code to the next
level out.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Fixes: 213c43676beb ("drm/i915/mtl: Remove the 'force_probe' requirement for Meteor Lake")
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240802031051.3816392-1-John.C.Harrison@Intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The basedie step initialization as well as its last users were removed
in commit 326e30e4624c ("drm/i915: Drop dead code for pvc"). Follow
through with removing the unused macros and struct member and debug
logging.
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240822143946.2526425-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Move the stepping related macros over to display. We can proceed to
remove the compat macros from xe.
Note: Looks like we've failed to actually initialize the display
stepping for GMD ID based platforms in the xe driver. It does get set in
display runtime info, but until now the compat macro used
xe->info.step.display which was not set for GMD ID.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ce8bb94e1a801d3c345f1810837bdd1964c3af75.1724180287.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Sync with v6.11-rc1 in general, and specifically get the new
BACKLIGHT_POWER_ constants for power states.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The last users have been removed years ago. Finish the job.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240731110744.1572240-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
UAPI Changes:
- Support replaying GPU hangs with captured context image (Tvrtko Ursulin)
Driver Changes:
Fixes/improvements/new stuff:
- Automate CCS Mode setting during engine resets [gt] (Andi Shyti)
- Revert "drm/i915: Remove extra multi-gt pm-references" (Janusz Krzysztofik)
- Fix HAS_REGION() usage in intel_gt_probe_lmem() (Ville Syrjälä)
- Disarm breadcrumbs if engines are already idle [gt] (Chris Wilson)
- Shadow default engine context image in the context (Tvrtko Ursulin)
- Support replaying GPU hangs with captured context image (Tvrtko Ursulin)
- avoid FIELD_PREP warning [guc] (Arnd Bergmann)
- Fix CCS id's calculation for CCS mode setting [gt] (Andi Shyti)
- Increase FLR timeout from 3s to 9s (Andi Shyti)
- Update workaround 14018575942 [mtl] (Angus Chen)
Future platform enablement:
- Enable w/a 16021333562 for DG2, MTL and ARL [guc] (John Harrison)
Miscellaneous:
- Pass the region ID rather than a bitmask to HAS_REGION() (Ville Syrjälä)
- Remove counter productive REGION_* wrappers (Ville Syrjälä)
- Fix typo [gem/i915_gem_ttm_move] (Deming Wang)
- Delete the live_hearbeat_fast selftest [gt] (Krzysztof Niemiec)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Zmmazub+U9ewH9ts@linux
|
|
Some display refactoring patches are needed in order to allow conflict-
less merging.
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
The name 'HAS_REGION()' suggests we are checking for a single
region, so seem more sensible to pass in the region ID rather
than a bitmask.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502121423.1002-2-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Unlike DG2, Xe2_HPD does support multiple GV points with different
maximum memory bandwidths, but uses a much simpler algorithm than igpu
platforms use.
Bspec: 64631
CC: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240430172850.1881525-12-radhakrishna.sripada@intel.com
|
|
Display code uses IS_BATTLEMAGE macro but the platform support doesn't
exist in i915. So fake IS_BATTLEMAGE macro defined to enable building
i915 code. We should make sure the macro parameter is used in the
always-false expression so that we don't run into "unused variable"
warnings from i915 builds if the IS_BATTLEMAGE() check is the only place
the i915 pointer gets used in a function.
While we're at it, also update the IS_LUNARLAKE macro to include the
parameter in the false expression for consistency.
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240430172850.1881525-3-radhakrishna.sripada@intel.com
|
|
The info is related to display, and should be placed under
i915->display.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2e2f1c9576126927ea63a54639077c01d44ad5b6.1712599670.git.jani.nikula@intel.com
|
|
The info is related to display, and should be placed under
i915->display.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/733fc96df9153c6af8979d9b23d3aa3734937b56.1712599670.git.jani.nikula@intel.com
|
|
The info is related to display, and should be placed under
i915->display.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f6ac8e4c6ec8621bacf3db58a2bf156bd636f1d1.1712599670.git.jani.nikula@intel.com
|
|
The info is related to display, and should be placed under
i915->display. Start a new irq sub-substruct.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/eb89ed70020ea78396e1fec6f1a97693f2bdb96b.1712599670.git.jani.nikula@intel.com
|
|
The info is related to display, and should be placed under
i915->display.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ea012aa72c93f3d436ccacf8f75683757d144b82.1712599670.git.jani.nikula@intel.com
|
|
The info is related to display, and should be placed under
i915->display.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4e9877d1641bce905cc9dd5eabe40df51ddbe9b5.1712599670.git.jani.nikula@intel.com
|