summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915
AgeCommit message (Collapse)Author
7 hoursMerge tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernelHEADmasterLinus Torvalds
Pull drm updates from Dave Airlie: "Highlights: - Intel xe enable Panthor Lake, started adding WildCat Lake - amdgpu has a bunch of reset improvments along with the usual IP updates - msm got VM_BIND support which is important for vulkan sparse memory - more drm_panic users - gpusvm common code to handle a bunch of core SVM work outside drivers. Detail summary: Changes outside drm subdirectory: - 'shrink_shmem_memory()' for better shmem/hibernate interaction - Rust support infrastructure: - make ETIMEDOUT available - add size constants up to SZ_2G - add DMA coherent allocation bindings - mtd driver for Intel GPU non-volatile storage - i2c designware quirk for Intel xe core: - atomic helpers: tune enable/disable sequences - add task info to wedge API - refactor EDID quirks - connector: move HDR sink to drm_display_info - fourcc: half-float and 32-bit float formats - mode_config: pass format info to simplify dma-buf: - heaps: Give CMA heap a stable name ci: - add device tree validation and kunit displayport: - change AUX DPCD access probe address - add quirk for DPCD probe - add panel replay definitions - backlight control helpers fbdev: - make CONFIG_FIRMWARE_EDID available on all arches fence: - fix UAF issues format-helper: - improve tests gpusvm: - introduce devmem only flag for allocation - add timeslicing support to GPU SVM ttm: - improve eviction sched: - tracing improvements - kunit improvements - memory leak fixes - reset handling improvements color mgmt: - add hardware gamma LUT handling helpers bridge: - add destroy hook - switch to reference counted drm_bridge allocations - tc358767: convert to devm_drm_bridge_alloc - improve CEC handling panel: - switch to reference counter drm_panel allocations - fwnode panel lookup - Huiling hl055fhv028c support - Raspberry Pi 7" 720x1280 support - edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK - simple: AUO P238HAN01 - st7701: Winstar wf40eswaa6mnn0 - visionox: rm69299-shift - Renesas R61307, Renesas R69328 support - DJN HX83112B hdmi: - add CEC handling - YUV420 output support xe: - WildCat Lake support - Enable PanthorLake by default - mark BMG as SRIOV capable - update firmware recommendations - Expose media OA units - aux-bux support for non-volatile memory - MTD intel-dg driver for non-volatile memory - Expose fan control and voltage regulator in sysfs - restructure migration for multi-device - Restore GuC submit UAF fix - make GEM shrinker drm managed - SRIOV VF Post-migration recovery of GGTT nodes - W/A additions/reworks - Prefetch support for svm ranges - Don't allocate managed BO for each policy change - HWMON fixes for BMG - Create LRC BO without VM - PCI ID updates - make SLPC debugfs files optional - rework eviction rejection of bound external BOs - consolidate PAT programming logic for pre/post Xe2 - init changes for flicker-free boot - Enable GuC Dynamic Inhibit Context switch i915: - drm_panic support for i915/xe - initial flip queue off by default for LNL/PNL - Wildcat Lake Display support - Support for DSC fractional link bpp - Support for simultaneous Panel Replay and Adaptive sync - Support for PTL+ double buffer LUT - initial PIPEDMC event handling - drm_panel_follower support - DPLL interface renames - allocate struct intel_display dynamically - flip queue preperation - abstract DRAM detection better - avoid GuC scheduling stalls - remove DG1 force probe requirement - fix MEI interrupt handler on RT kernels - use backlight control helpers for eDP - more shared display code refactoring amdgpu: - add userq slot to INFO ioctl - SR-IOV hibernation support - Suspend improvements - Backlight improvements - Use scaling for non-native eDP modes - cleaner shader updates for GC 9.x - Remove fence slab - SDMA fw checks for userq support - RAS updates - DMCUB updates - DP tunneling fixes - Display idle D3 support - Per queue reset improvements - initial smartmux support amdkfd: - enable KFD on loongarch - mtype fix for ext coherent system memory radeon: - CS validation additional GL extensions - drop console lock during suspend/resume - bump driver version msm: - VM BIND support - CI: infrastructure updates - UBWC single source of truth - decouple GPU and KMS support - DP: rework I/O accessors - DPU: SM8750 support - DSI: SM8750 support - GPU: X1-45 support and speedbin support for X1-85 - MDSS: SM8750 support nova: - register! macro improvements - DMA object abstraction - VBIOS parser + fwsec lookup - sysmem flush page support - falcon: generic falcon boot code and HAL - FWSEC-FRTS: fb setup and load/execute ivpu: - Add Wildcat Lake support - Add turbo flag ast: - improve hardware generations implementation imx: - IMX8qxq Display Controller support lima: - Rockchip RK3528 GPU support nouveau: - fence handling cleanup panfrost: - MT8370 support - bo labeling - 64-bit register access qaic: - add RAS support rockchip: - convert inno_hdmi to a bridge rz-du: - add RZ/V2H(P) support - MIPI-DSI DCS support sitronix: - ST7567 support sun4i: - add H616 support tidss: - add TI AM62L support - AM65x OLDI bridge support bochs: - drm panic support vkms: - YUV and R* format support - use faux device vmwgfx: - fence improvements hyperv: - move out of simple - add drm_panic support" * tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits) drm/tidss: oldi: convert to devm_drm_bridge_alloc() API drm/tidss: encoder: convert to devm_drm_bridge_alloc() drm/amdgpu: move reset support type checks into the caller drm/amdgpu/sdma7: re-emit unprocessed state on ring reset drm/amdgpu/sdma6: re-emit unprocessed state on ring reset drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset drm/amdgpu/sdma5: re-emit unprocessed state on ring reset drm/amdgpu/gfx12: re-emit unprocessed state on ring reset drm/amdgpu/gfx11: re-emit unprocessed state on ring reset drm/amdgpu/gfx10: re-emit unprocessed state on ring reset drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset drm/amdgpu: Add WARN_ON to the resource clear function drm/amd/pm: Use cached metrics data on SMUv13.0.6 drm/amd/pm: Use cached data for min/max clocks gpu: nova-core: fix bounds check in PmuLookupTableEntry::new drm/amdgpu: Replace HQD terminology with slots naming drm/amdgpu: Add user queue instance count in HW IP info drm/amd/amdgpu: Add helper functions for isp buffers drm/amd/amdgpu: Initialize swnode for ISP MFD device ...
18 hoursMerge tag 'net-next-6.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Wrap datapath globals into net_aligned_data, to avoid false sharing - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container) - Add SO_INQ and SCM_INQ support to AF_UNIX - Add SIOCINQ support to AF_VSOCK - Add TCP_MAXSEG sockopt to MPTCP - Add IPv6 force_forwarding sysctl to enable forwarding per interface - Make TCP validation of whether packet fully fits in the receive window and the rcv_buf more strict. With increased use of HW aggregation a single "packet" can be multiple 100s of kB - Add MSG_MORE flag to optimize large TCP transmissions via sockmap, improves latency up to 33% for sockmap users - Convert TCP send queue handling from tasklet to BH workque - Improve BPF iteration over TCP sockets to see each socket exactly once - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code - Support enabling kernel threads for NAPI processing on per-NAPI instance basis rather than a whole device. Fully stop the kernel NAPI thread when threaded NAPI gets disabled. Previously thread would stick around until ifdown due to tricky synchronization - Allow multicast routing to take effect on locally-generated packets - Add output interface argument for End.X in segment routing - MCTP: add support for gateway routing, improve bind() handling - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink - Add a new neighbor flag ("extern_valid"), which cedes refresh responsibilities to userspace. This is needed for EVPN multi-homing where a neighbor entry for a multi-homed host needs to be synced across all the VTEPs among which the host is multi-homed - Support NUD_PERMANENT for proxy neighbor entries - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM - Add sequence numbers to netconsole messages. Unregister netconsole's console when all net targets are removed. Code refactoring. Add a number of selftests - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol should be used for an inbound SA lookup - Support inspecting ref_tracker state via DebugFS - Don't force bonding advertisement frames tx to ~333 ms boundaries. Add broadcast_neighbor option to send ARP/ND on all bonded links - Allow providing upcall pid for the 'execute' command in openvswitch - Remove DCCP support from Netfilter's conntrack - Disallow multiple packet duplications in the queuing layer - Prevent use of deprecated iptables code on PREEMPT_RT Driver API: - Support RSS and hashing configuration over ethtool Netlink - Add dedicated ethtool callbacks for getting and setting hashing fields - Add support for power budget evaluation strategy in PSE / Power-over-Ethernet. Generate Netlink events for overcurrent etc - Support DPLL phase offset monitoring across all device inputs. Support providing clock reference and SYNC over separate DPLL inputs - Support traffic classes in devlink rate API for bandwidth management - Remove rtnl_lock dependency from UDP tunnel port configuration Device drivers: - Add a new Broadcom driver for 800G Ethernet (bnge) - Add a standalone driver for Microchip ZL3073x DPLL - Remove IBM's NETIUCV device driver - Ethernet high-speed NICs: - Broadcom (bnxt): - support zero-copy Tx of DMABUF memory - take page size into account for page pool recycling rings - Intel (100G, ice, idpf): - idpf: XDP and AF_XDP support preparations - idpf: add flow steering - add link_down_events statistic - clean up the TSPLL code - preparations for live VM migration - nVidia/Mellanox: - support zero-copy Rx/Tx interfaces (DMABUF and io_uring) - optimize context memory usage for matchers - expose serial numbers in devlink info - support PCIe congestion metrics - Meta (fbnic): - add 25G, 50G, and 100G link modes to phylink - support dumping FW logs - Marvell/Cavium: - support for CN20K generation of the Octeon chips - Amazon: - add HW clock (without timestamping, just hypervisor time access) - Ethernet virtual: - VirtIO net: - support segmentation of UDP-tunnel-encapsulated packets - Google (gve): - support packet timestamping and clock synchronization - Microsoft vNIC: - add handler for device-originated servicing events - allow dynamic MSI-X vector allocation - support Tx bandwidth clamping - Ethernet NICs consumer, and embedded: - AMD: - amd-xgbe: hardware timestamping and PTP clock support - Broadcom integrated MACs (bcmgenet, bcmasp): - use napi_complete_done() return value to support NAPI polling - add support for re-starting auto-negotiation - Broadcom switches (b53): - support BCM5325 switches - add bcm63xx EPHY power control - Synopsys (stmmac): - lots of code refactoring and cleanups - TI: - icssg-prueth: read firmware-names from device tree - icssg: PRP offload support - Microchip: - lan78xx: convert to PHYLINK for improved PHY and MAC management - ksz: add KSZ8463 switch support - Intel: - support similar queue priority scheme in multi-queue and time-sensitive networking (taprio) - support packet pre-emption in both - RealTek (r8169): - enable EEE at 5Gbps on RTL8126 - Airoha: - add PPPoE offload support - MDIO bus controller for Airoha AN7583 - Ethernet PHYs: - support for the IPQ5018 internal GE PHY - micrel KSZ9477 switch-integrated PHYs: - add MDI/MDI-X control support - add RX error counters - add cable test support - add Signal Quality Indicator (SQI) reporting - dp83tg720: improve reset handling and reduce link recovery time - support bcm54811 (and its MII-Lite interface type) - air_en8811h: support resume/suspend - support PHY counters for QCA807x and QCA808x - support WoL for QCA807x - CAN drivers: - rcar_canfd: support for Transceiver Delay Compensation - kvaser: report FW versions via devlink dev info - WiFi: - extended regulatory info support (6 GHz) - add statistics and beacon monitor for Multi-Link Operation (MLO) - support S1G aggregation, improve S1G support - add Radio Measurement action fields - support per-radio RTS threshold - some work around how FIPS affects wifi, which was wrong (RC4 is used by TKIP, not only WEP) - improvements for unsolicited probe response handling - WiFi drivers: - RealTek (rtw88): - IBSS mode for SDIO devices - RealTek (rtw89): - BT coexistence for MLO/WiFi7 - concurrent station + P2P support - support for USB devices RTL8851BU/RTL8852BU - Intel (iwlwifi): - use embedded PNVM in (to be released) FW images to fix compatibility issues - many cleanups (unused FW APIs, PCIe code, WoWLAN) - some FIPS interoperability - MediaTek (mt76): - firmware recovery improvements - more MLO work - Qualcomm/Atheros (ath12k): - fix scan on multi-radio devices - more EHT/Wi-Fi 7 features - encapsulation/decapsulation offload - Broadcom (brcm80211): - support SDIO 43751 device - Bluetooth: - hci_event: add support for handling LE BIG Sync Lost event - ISO: add socket option to report packet seqnum via CMSG - ISO: support SCM_TIMESTAMPING for ISO TS - Bluetooth drivers: - intel_pcie: support Function Level Reset - nxpuart: add support for 4M baudrate - nxpuart: implement powerup sequence, reset, FW dump, and FW loading" * tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits) dpll: zl3073x: Fix build failure selftests: bpf: fix legacy netfilter options ipv6: annotate data-races around rt->fib6_nsiblings ipv6: fix possible infinite loop in fib6_info_uses_dev() ipv6: prevent infinite loop in rt6_nlmsg_size() ipv6: add a retry logic in net6_rt_notify() vrf: Drop existing dst reference in vrf_ip6_input_dst net/sched: taprio: align entry index attr validation with mqprio net: fsl_pq_mdio: use dev_err_probe selftests: rtnetlink.sh: remove esp4_offload after test vsock: remove unnecessary null check in vsock_getname() igb: xsk: solve negative overflow of nb_pkts in zerocopy mode stmmac: xsk: fix negative overflow of budget in zerocopy mode dt-bindings: ieee802154: Convert at86rf230.txt yaml format net: dsa: microchip: Disable PTP function of KSZ8463 net: dsa: microchip: Setup fiber ports for KSZ8463 net: dsa: microchip: Write switch MAC address differently for KSZ8463 net: dsa: microchip: Use different registers for KSZ8463 net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver dt-bindings: net: dsa: microchip: Add KSZ8463 switch support ...
38 hoursMerge tag 'driver-core-6.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core Pull driver core updates from Danilo Krummrich: "debugfs: - Remove unneeded debugfs_file_{get,put}() instances - Remove last remnants of debugfs_real_fops() - Allow storing non-const void * in struct debugfs_inode_info::aux sysfs: - Switch back to attribute_group::bin_attrs (treewide) - Switch back to bin_attribute::read()/write() (treewide) - Constify internal references to 'struct bin_attribute' Support cache-ids for device-tree systems: - Add arch hook arch_compact_of_hwid() - Use arch_compact_of_hwid() to compact MPIDR values on arm64 Rust: - Device: - Introduce CoreInternal device context (for bus internal methods) - Provide generic drvdata accessors for bus devices - Provide Driver::unbind() callbacks - Use the infrastructure above for auxiliary, PCI and platform - Implement Device::as_bound() - Rename Device::as_ref() to Device::from_raw() (treewide) - Implement fwnode and device property abstractions - Implement example usage in the Rust platform sample driver - Devres: - Remove the inner reference count (Arc) and use pin-init instead - Replace Devres::new_foreign_owned() with devres::register() - Require T to be Send in Devres<T> - Initialize the data kept inside a Devres last - Provide an accessor for the Devres associated Device - Device ID: - Add support for ACPI device IDs and driver match tables - Split up generic device ID infrastructure - Use generic device ID infrastructure in net::phy - DMA: - Implement the dma::Device trait - Add DMA mask accessors to dma::Device - Implement dma::Device for PCI and platform devices - Use DMA masks from the DMA sample module - I/O: - Implement abstraction for resource regions (struct resource) - Implement resource-based ioremap() abstractions - Provide platform device accessors for I/O (remap) requests - Misc: - Support fallible PinInit types in Revocable - Implement Wrapper<T> for Opaque<T> - Merge pin-init blanket dependencies (for Devres) Misc: - Fix OF node leak in auxiliary_device_create() - Use util macros in device property iterators - Improve kobject sample code - Add device_link_test() for testing device link flags - Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits - Hint to prefer container_of_const() over container_of()" * tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits) rust: io: fix broken intra-doc links to `platform::Device` rust: io: fix broken intra-doc link to missing `flags` module rust: io: mem: enable IoRequest doc-tests rust: platform: add resource accessors rust: io: mem: add a generic iomem abstraction rust: io: add resource abstraction rust: samples: dma: set DMA mask rust: platform: implement the `dma::Device` trait rust: pci: implement the `dma::Device` trait rust: dma: add DMA addressing capabilities rust: dma: implement `dma::Device` trait rust: net::phy Change module_phy_driver macro to use module_device_table macro rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id rust: device_id: split out index support into a separate trait device: rust: rename Device::as_ref() to Device::from_raw() arm64: cacheinfo: Provide helper to compress MPIDR value into u32 cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id cacheinfo: Set cache 'id' based on DT data container_of: Document container_of() is not to be used in new code driver core: auxiliary bus: fix OF node leak ...
3 daysMerge tag 'vfs-6.17-rc1.mmap_prepare' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull mmap_prepare updates from Christian Brauner: "Last cycle we introduce f_op->mmap_prepare() in c84bf6dd2b83 ("mm: introduce new .mmap_prepare() file callback"). This is preferred to the existing f_op->mmap() hook as it does require a VMA to be established yet, thus allowing the mmap logic to invoke this hook far, far earlier, prior to inserting a VMA into the virtual address space, or performing any other heavy handed operations. This allows for much simpler unwinding on error, and for there to be a single attempt at merging a VMA rather than having to possibly reattempt a merge based on potentially altered VMA state. Far more importantly, it prevents inappropriate manipulation of incompletely initialised VMA state, which is something that has been the cause of bugs and complexity in the past. The intent is to gradually deprecate f_op->mmap, and in that vein this series coverts the majority of file systems to using f_op->mmap_prepare. Prerequisite steps are taken - firstly ensuring all checks for mmap capabilities use the file_has_valid_mmap_hooks() helper rather than directly checking for f_op->mmap (which is now not a valid check) and secondly updating daxdev_mapping_supported() to not require a VMA parameter to allow ext4 and xfs to be converted. Commit bb666b7c2707 ("mm: add mmap_prepare() compatibility layer for nested file systems") handles the nasty edge-case of nested file systems like overlayfs, which introduces a compatibility shim to allow f_op->mmap_prepare() to be invoked from an f_op->mmap() callback. This allows for nested filesystems to continue to function correctly with all file systems regardless of which callback is used. Once we finally convert all file systems, this shim can be removed. As a result, ecryptfs, fuse, and overlayfs remain unaltered so they can nest all other file systems. We additionally do not update resctl - as this requires an update to remap_pfn_range() (or an alternative to it) which we defer to a later series, equally we do not update cramfs which needs a mixed mapping insertion with the same issue, nor do we update procfs, hugetlbfs, syfs or kernfs all of which require VMAs for internal state and hooks. We shall return to all of these later" * tag 'vfs-6.17-rc1.mmap_prepare' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: doc: update porting, vfs documentation to describe mmap_prepare() fs: replace mmap hook with .mmap_prepare for simple mappings fs: convert most other generic_file_*mmap() users to .mmap_prepare() fs: convert simple use of generic_file_*_mmap() to .mmap_prepare() mm/filemap: introduce generic_file_*_mmap_prepare() helpers fs/xfs: transition from deprecated .mmap hook to .mmap_prepare fs/ext4: transition from deprecated .mmap hook to .mmap_prepare fs/dax: make it possible to check dev dax support without a VMA fs: consistently use can_mmap_file() helper mm/nommu: use file_has_valid_mmap_hooks() helper mm: rename call_mmap/mmap_prepare to vfs_mmap/mmap_prepare
3 daysMerge tag 'vfs-6.17-rc1.misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull misc VFS updates from Christian Brauner: "This contains the usual selections of misc updates for this cycle. Features: - Add ext4 IOCB_DONTCACHE support This refactors the address_space_operations write_begin() and write_end() callbacks to take const struct kiocb * as their first argument, allowing IOCB flags such as IOCB_DONTCACHE to propagate to the filesystem's buffered I/O path. Ext4 is updated to implement handling of the IOCB_DONTCACHE flag and advertises support via the FOP_DONTCACHE file operation flag. Additionally, the i915 driver's shmem write paths are updated to bypass the legacy write_begin/write_end interface in favor of directly calling write_iter() with a constructed synchronous kiocb. Another i915 change replaces a manual write loop with kernel_write() during GEM shmem object creation. Cleanups: - don't duplicate vfs_open() in kernel_file_open() - proc_fd_getattr(): don't bother with S_ISDIR() check - fs/ecryptfs: replace snprintf with sysfs_emit in show function - vfs: Remove unnecessary list_for_each_entry_safe() from evict_inodes() - filelock: add new locks_wake_up_waiter() helper - fs: Remove three arguments from block_write_end() - VFS: change old_dir and new_dir in struct renamedata to dentrys - netfs: Remove unused declaration netfs_queue_write_request() Fixes: - eventpoll: Fix semi-unbounded recursion - eventpoll: fix sphinx documentation build warning - fs/read_write: Fix spelling typo - fs: annotate data race between poll_schedule_timeout() and pollwake() - fs/pipe: set FMODE_NOWAIT in create_pipe_files() - docs/vfs: update references to i_mutex to i_rwsem - fs/buffer: remove comment about hard sectorsize - fs/buffer: remove the min and max limit checks in __getblk_slow() - fs/libfs: don't assume blocksize <= PAGE_SIZE in generic_check_addressable - fs_context: fix parameter name in infofc() macro - fs: Prevent file descriptor table allocations exceeding INT_MAX" * tag 'vfs-6.17-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (24 commits) netfs: Remove unused declaration netfs_queue_write_request() eventpoll: fix sphinx documentation build warning ext4: support uncached buffered I/O mm/pagemap: add write_begin_get_folio() helper function fs: change write_begin/write_end interface to take struct kiocb * drm/i915: Refactor shmem_pwrite() to use kiocb and write_iter drm/i915: Use kernel_write() in shmem object create eventpoll: Fix semi-unbounded recursion vfs: Remove unnecessary list_for_each_entry_safe() from evict_inodes() fs/libfs: don't assume blocksize <= PAGE_SIZE in generic_check_addressable fs/buffer: remove the min and max limit checks in __getblk_slow() fs: Prevent file descriptor table allocations exceeding INT_MAX fs: Remove three arguments from block_write_end() fs/ecryptfs: replace snprintf with sysfs_emit in show function fs: annotate suspected data race between poll_schedule_timeout() and pollwake() docs/vfs: update references to i_mutex to i_rwsem fs/buffer: remove comment about hard sectorsize fs_context: fix parameter name in infofc() macro VFS: change old_dir and new_dir in struct renamedata to dentrys proc_fd_getattr(): don't bother with S_ISDIR() check ...
3 daysMerge tag 'pull-mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull vfs mount updates from Al Viro: - mount hash conflicts rudiments are gone now - we do not allow multiple mounts with the same parent/mountpoint to be hashed at the same time. - 'struct mount' changes: - mnt_umounting is gone - mnt_slave_list/mnt_slave is an hlist now - overmounts are kept track of by explicit pointer in mount - a bunch of flags moved out of mnt_flags to a new field, with only namespace_sem for protection - mnt_expiry is protected by mount_lock now (instead of namespace_sem) - MNT_LOCKED is used only for mounts that need to remain attached to their parents to prevent mountpoint exposure - no more overloading it for absolute roots - all mnt_list uses are transient now - it's used only to represent temporary sets during umount_tree() - mount refcounting change: children no longer pin parents for any mounts, whether they'd passed through umount_tree() or not - 'struct mountpoint' changes: - refcount is no more; what matters is ->m_list emptiness - instead of temporary bumping the refcount, we insert a new object (pinned_mountpoint) into ->m_list - new calling conventions for lock_mount() and friends - do_move_mount()/attach_recursive_mnt() seriously cleaned up - globals in fs/pnode.c are gone - propagate_mnt(), change_mnt_propagation() and propagate_umount() cleaned up (in the last case - pretty much completely rewritten). - freeing of emptied mnt_namespace is done in namespace_unlock(). For one thing, there are subtle ordering requirements there; for another it simplifies cleanups. - assorted cleanups - restore the machinery for long-term mounts from accumulated bitrot. This is going to get a followup come next cycle, when the change of vfs_fs_parse_string() calling conventions goes into -next * tag 'pull-mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (48 commits) statmount_mnt_basic(): simplify the logics for group id invent_group_ids(): zero ->mnt_group_id always implies !IS_MNT_SHARED() get rid of CL_SHARE_TO_SLAVE take freeing of emptied mnt_namespace to namespace_unlock() copy_tree(): don't link the mounts via mnt_list change_mnt_propagation(): move ->mnt_master assignment into MS_SLAVE case mnt_slave_list/mnt_slave: turn into hlist_head/hlist_node turn do_make_slave() into transfer_propagation() do_make_slave(): choose new master sanely change_mnt_propagation(): do_make_slave() is a no-op unless IS_MNT_SHARED() change_mnt_propagation() cleanups, step 1 propagate_mnt(): fix comment and convert to kernel-doc, while we are at it propagate_mnt(): get rid of last_dest fs/pnode.c: get rid of globals propagate_one(): fold into the sole caller propagate_one(): separate the "what should be the master for this copy" part propagate_one(): separate the "do we need secondary here?" logics propagate_mnt(): handle all peer groups in the same loop propagate_one(): get rid of dest_master mount: separate the flags accessed only under namespace_sem ...
8 daysdrm/i915/display: Fix dma_fence_wait_timeout() return value handlingAakash Deep Sarkar
dma_fence_wait_timeout returns a long type but the driver is only using the lower 32 bits of the retval and discarding the upper 32 bits. This is particularly problematic if there are already signalled or stub fences on some of the hw planes. In this case the dma_fence_wait_timeout function will immediately return with timeout value MAX_SCHEDULE_TIMEOUT (0x7fffffffffffffff) since the fence is already signalled. If the driver only uses the lower 32 bits of this return value then it'll interpret it as an error code (0xFFFFFFFF or (-1)) and skip the wait on the remaining fences. This issue was first observed in the xe driver with the Android compositor where the GPU composited layer was not properly waited on when there were stub fences in other overlay planes resulting in visual artifacts. Fixes: d59cf7bb73f3c ("drm/i915/display: Use dma_fence interfaces instead of i915_sw_fence") Signed-off-by: Aakash Deep Sarkar <aakash.deep.sarkar@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Link: https://lore.kernel.org/r/20250708074540.1948068-1-aakash.deep.sarkar@intel.com (cherry picked from commit cdb16039515a5ac4d2c923f7a651cf19a803a3fe) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
10 daysdrm/i915/dp: Fix 2.7 Gbps DP_LINK_BW value on g4xVille Syrjälä
On g4x we currently use the 96MHz non-SSC refclk, which can't actually generate an exact 2.7 Gbps link rate. In practice we end up with 2.688 Gbps which seems to be close enough to actually work, but link training is currently failing due to miscalculating the DP_LINK_BW value (we calcualte it directly from port_clock which reflects the actual PLL outpout frequency). Ideas how to fix this: - nudge port_clock back up to 270000 during PLL computation/readout - track port_clock and the nominal link rate separately so they might differ a bit - switch to the 100MHz refclk, but that one should be SSC so perhaps not something we want While we ponder about a better solution apply some band aid to the immediate issue of miscalculated DP_LINK_BW value. With this I can again use 2.7 Gbps link rate on g4x. Cc: stable@vger.kernel.org Fixes: 665a7b04092c ("drm/i915: Feed the DPLL output freq back into crtc_state") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250710201718.25310-2-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> (cherry picked from commit a8b874694db5cae7baaf522756f87acd956e6e66) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
10 daysMerge tag 'drm-misc-next-2025-07-17' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for 6.17: UAPI Changes: Cross-subsystem Changes: Core Changes: - mode_config: Change fb_create prototype to pass the drm_format_info and avoid redundant lookups in drivers - sched: kunit improvements, memory leak fixes, reset handling improvements - tests: kunit EDID update Driver Changes: - amdgpu: Hibernation fixes, structure lifetime fixes - nouveau: sched improvements - sitronix: Add Sitronix ST7567 Support - bridge: - Make connector available to bridge detect hook - panel: - More refcounting changes - New panels: BOE NE14QDM Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@redhat.com> Link: https://lore.kernel.org/r/20250717-efficient-kudu-of-fantasy-ff95e0@houat
14 daysMerge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.16-rc7). Conflicts: Documentation/netlink/specs/ovpn.yaml 880d43ca9aa4 ("netlink: specs: clean up spaces in brackets") af52020fc599 ("ovpn: reject unexpected netlink attributes") drivers/net/phy/phy_device.c a44312d58e78 ("net: phy: Don't register LEDs for genphy") f0f2b992d818 ("net: phy: Don't register LEDs for genphy") https://lore.kernel.org/20250710114926.7ec3a64f@kernel.org drivers/net/wireless/intel/iwlwifi/fw/regulatory.c drivers/net/wireless/intel/iwlwifi/mld/regulatory.c 5fde0fcbd760 ("wifi: iwlwifi: mask reserved bits in chan_state_active_bitmap") ea045a0de3b9 ("wifi: iwlwifi: add support for accepting raw DSM tables by firmware") net/ipv6/mcast.c ae3264a25a46 ("ipv6: mcast: Delay put pmc->idev in mld_del_delrec()") a8594c956cc9 ("ipv6: mcast: Avoid a duplicate pointer check in mld_del_delrec()") https://lore.kernel.org/8cc52891-3653-4b03-a45e-05464fe495cf@kernel.org No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-16drm/i915: Pass along the format info from .fb_create() to ↵Ville Syrjälä
drm_helper_mode_fill_fb_struct() Plumb the format info from .fb_create() all the way to drm_helper_mode_fill_fb_struct() to avoid the redundant lookup. For the fbdev case a manual drm_get_format_info() lookup is needed. Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-14-ville.syrjala@linux.intel.com
2025-07-16drm: Allow the caller to pass in the format info to ↵Ville Syrjälä
drm_helper_mode_fill_fb_struct() Soon all drivers should have the format info already available in the places where they call drm_helper_mode_fill_fb_struct(). Allow it to be passed along into drm_helper_mode_fill_fb_struct() instead of doing yet another redundant lookup. Start by always passing in NULL and still doing the extra lookup. The actual changes to avoid the lookup will follow. Done with cocci (with some manual fixups): @@ identifier dev, fb, mode_cmd; expression get_format_info; @@ void drm_helper_mode_fill_fb_struct(struct drm_device *dev, struct drm_framebuffer *fb, + const struct drm_format_info *info, const struct drm_mode_fb_cmd2 *mode_cmd) { ... - fb->format = get_format_info; + fb->format = info ?: get_format_info; ... } @@ identifier dev, fb, mode_cmd; @@ void drm_helper_mode_fill_fb_struct(struct drm_device *dev, struct drm_framebuffer *fb, + const struct drm_format_info *info, const struct drm_mode_fb_cmd2 *mode_cmd); @@ expression dev, fb, mode_cmd; @@ drm_helper_mode_fill_fb_struct(dev, fb + ,NULL ,mode_cmd); Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Inki Dae <inki.dae@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <lumag@kernel.org> Cc: Sean Paul <sean@poorly.run> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: Lyude Paul <lyude@redhat.com> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Mikko Perttunen <mperttunen@nvidia.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com> Cc: Gurchetan Singh <gurchetansingh@chromium.org> Cc: Chia-I Wu <olvaffe@gmail.com> Cc: Zack Rusin <zack.rusin@broadcom.com> Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com> Cc: amd-gfx@lists.freedesktop.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: linux-tegra@vger.kernel.org Cc: virtualization@lists.linux.dev Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-6-ville.syrjala@linux.intel.com
2025-07-16drm: Pass the format info to .fb_create()Ville Syrjälä
Pass along the format information from the top to .fb_create() so that we can avoid redundant (and somewhat expensive) lookups in the drivers. Done with cocci (with some manual fixups): @@ identifier func =~ ".*create.*"; identifier dev, file, mode_cmd; @@ struct drm_framebuffer *func( struct drm_device *dev, struct drm_file *file, + const struct drm_format_info *info, const struct drm_mode_fb_cmd2 *mode_cmd) { ... ( - const struct drm_format_info *info = drm_get_format_info(...); | - const struct drm_format_info *info; ... - info = drm_get_format_info(...); ) <... - if (!info) - return ...; ...> } @@ identifier func =~ ".*create.*"; identifier dev, file, mode_cmd; @@ struct drm_framebuffer *func( struct drm_device *dev, struct drm_file *file, + const struct drm_format_info *info, const struct drm_mode_fb_cmd2 *mode_cmd) { ... } @find@ identifier fb_create_func =~ ".*create.*"; identifier dev, file, mode_cmd; @@ struct drm_framebuffer *fb_create_func( struct drm_device *dev, struct drm_file *file, + const struct drm_format_info *info, const struct drm_mode_fb_cmd2 *mode_cmd); @@ identifier find.fb_create_func; expression dev, file, mode_cmd; @@ fb_create_func(dev, file + ,info ,mode_cmd) @@ expression dev, file, mode_cmd; @@ drm_gem_fb_create(dev, file + ,info ,mode_cmd) @@ expression dev, file, mode_cmd; @@ drm_gem_fb_create_with_dirty(dev, file + ,info ,mode_cmd) @@ expression dev, file_priv, mode_cmd; identifier info, fb; @@ info = drm_get_format_info(...); ... fb = dev->mode_config.funcs->fb_create(dev, file_priv + ,info ,mode_cmd); @@ identifier dev, file_priv, mode_cmd; @@ struct drm_mode_config_funcs { ... struct drm_framebuffer *(*fb_create)(struct drm_device *dev, struct drm_file *file_priv, + const struct drm_format_info *info, const struct drm_mode_fb_cmd2 *mode_cmd); ... }; v2: Fix kernel docs (Laurent) Fix commit msg (Geert) Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Inki Dae <inki.dae@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Rob Clark <robdclark@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <lumag@kernel.org> Cc: Sean Paul <sean@poorly.run> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Agner <stefan@agner.ch> Cc: Lyude Paul <lyude@redhat.com> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: Biju Das <biju.das.jz@bp.renesas.com> Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Cc: Andy Yan <andy.yan@rock-chips.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Mikko Perttunen <mperttunen@nvidia.com> Cc: Dave Stevenson <dave.stevenson@raspberrypi.com> Cc: "Maíra Canal" <mcanal@igalia.com> Cc: Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com> Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com> Cc: Gurchetan Singh <gurchetansingh@chromium.org> Cc: Chia-I Wu <olvaffe@gmail.com> Cc: Zack Rusin <zack.rusin@broadcom.com> Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com> Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Cc: amd-gfx@lists.freedesktop.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: virtualization@lists.linux.dev Cc: spice-devel@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-5-ville.syrjala@linux.intel.com
2025-07-16drm: Pass pixel_format+modifier to .get_format_info()Ville Syrjälä
Decouple .get_format_info() from struct drm_mode_fb_cmd2 and just pass the pixel format+modifier combo in by hand. We may want to use .get_format_info() outside of the normal addfb paths where we won't have a struct drm_mode_fb_cmd2, and creating a temporary one just for this seems silly. v2: Fix intel_fb_get_format_info() docs (Laurent) Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <siqueira@igalia.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-2-ville.syrjala@linux.intel.com
2025-07-16drm/i915: Refactor shmem_pwrite() to use kiocb and write_iterTaotao Chen
Refactors shmem_pwrite() to replace the ->write_begin/end logic with a write_iter-based implementation using kiocb and iov_iter. While kernel_write() was considered, it caused about 50% performance regression. vfs_write() is not exported for kernel use. Therefore, file->f_op->write_iter() is called directly with a synchronously initialized kiocb to preserve performance and remove write_begin usage. Performance results use gem_pwrite on Intel CPU i7-10700 (average of 10 runs): - ./gem_pwrite --run-subtest bench -s 16384 Before: 0.205s, After: 0.214s - ./gem_pwrite --run-subtest bench -s 524288 Before: 6.1021s, After: 4.8047s Part of a series refactoring address_space_operations write_begin and write_end callbacks to use struct kiocb for passing write context and flags. Signed-off-by: Taotao Chen <chentaotao@didiglobal.com> Link: https://lore.kernel.org/20250716093559.217344-3-chentaotao@didiglobal.com Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-07-16drm/i915: Use kernel_write() in shmem object createTaotao Chen
Replace the write_begin/write_end loop in i915_gem_object_create_shmem_from_data() with call to kernel_write(). This function initializes shmem-backed GEM objects. kernel_write() simplifies the code by removing manual folio handling. Part of a series refactoring address_space_operations write_begin and write_end callbacks to use struct kiocb for passing write context and flags. Signed-off-by: Taotao Chen <chentaotao@didiglobal.com> Link: https://lore.kernel.org/20250716093559.217344-2-chentaotao@didiglobal.com Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-07-11Merge tag 'drm-intel-next-2025-07-10' of ↵Simona Vetter
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next Driver Changes: - DSI panel's version 2 mipi-sequences fix (Hans) Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/aHA-qrFQ00TaNsGr@intel.com
2025-07-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.16-rc6). No conflicts. Adjacent changes: Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml 0a12c435a1d6 ("dt-bindings: net: sun8i-emac: Add A100 EMAC compatible") b3603c0466a8 ("dt-bindings: net: sun8i-emac: Rename A523 EMAC0 to GMAC0") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-10drm/i915/bios: Apply vlv_fixup_mipi_sequences() to v2 mipi-sequences tooHans de Goede
It turns out that the fixup from vlv_fixup_mipi_sequences() is necessary for some DSI panel's with version 2 mipi-sequences too. Specifically the Acer Iconia One 8 A1-840 (not to be confused with the A1-840FHD which is different) has the following sequences: BDB block 53 (1284 bytes) - MIPI sequence block: Sequence block version v2 Panel 0 * Sequence 2 - MIPI_SEQ_INIT_OTP GPIO index 9, source 0, set 0 (0x00) Delay: 50000 us GPIO index 9, source 0, set 1 (0x01) Delay: 6000 us GPIO index 9, source 0, set 0 (0x00) Delay: 6000 us GPIO index 9, source 0, set 1 (0x01) Delay: 25000 us Send DCS: Port A, VC 0, LP, Type 39, Length 5, Data ff aa 55 a5 80 Send DCS: Port A, VC 0, LP, Type 39, Length 3, Data 6f 11 00 ... Send DCS: Port A, VC 0, LP, Type 05, Length 1, Data 29 Delay: 120000 us Sequence 4 - MIPI_SEQ_DISPLAY_OFF Send DCS: Port A, VC 0, LP, Type 05, Length 1, Data 28 Delay: 105000 us Send DCS: Port A, VC 0, LP, Type 05, Length 2, Data 10 00 Delay: 10000 us Sequence 5 - MIPI_SEQ_ASSERT_RESET Delay: 10000 us GPIO index 9, source 0, set 0 (0x00) Notice how there is no MIPI_SEQ_DEASSERT_RESET, instead the deassert is done at the beginning of MIPI_SEQ_INIT_OTP, which is exactly what the fixup from vlv_fixup_mipi_sequences() fixes up. Extend it to also apply to v2 sequences, this fixes the panel not working on the Acer Iconia One 8 A1-840. Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14605 Signed-off-by: Hans de Goede <hansg@kernel.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://lore.kernel.org/r/20250703143824.7121-1-hansg@kernel.org Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 11895f375939d60efe7ed5dddc1cffe2e79f976c) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-07-10drm/i915/bios: Apply vlv_fixup_mipi_sequences() to v2 mipi-sequences tooHans de Goede
It turns out that the fixup from vlv_fixup_mipi_sequences() is necessary for some DSI panel's with version 2 mipi-sequences too. Specifically the Acer Iconia One 8 A1-840 (not to be confused with the A1-840FHD which is different) has the following sequences: BDB block 53 (1284 bytes) - MIPI sequence block: Sequence block version v2 Panel 0 * Sequence 2 - MIPI_SEQ_INIT_OTP GPIO index 9, source 0, set 0 (0x00) Delay: 50000 us GPIO index 9, source 0, set 1 (0x01) Delay: 6000 us GPIO index 9, source 0, set 0 (0x00) Delay: 6000 us GPIO index 9, source 0, set 1 (0x01) Delay: 25000 us Send DCS: Port A, VC 0, LP, Type 39, Length 5, Data ff aa 55 a5 80 Send DCS: Port A, VC 0, LP, Type 39, Length 3, Data 6f 11 00 ... Send DCS: Port A, VC 0, LP, Type 05, Length 1, Data 29 Delay: 120000 us Sequence 4 - MIPI_SEQ_DISPLAY_OFF Send DCS: Port A, VC 0, LP, Type 05, Length 1, Data 28 Delay: 105000 us Send DCS: Port A, VC 0, LP, Type 05, Length 2, Data 10 00 Delay: 10000 us Sequence 5 - MIPI_SEQ_ASSERT_RESET Delay: 10000 us GPIO index 9, source 0, set 0 (0x00) Notice how there is no MIPI_SEQ_DEASSERT_RESET, instead the deassert is done at the beginning of MIPI_SEQ_INIT_OTP, which is exactly what the fixup from vlv_fixup_mipi_sequences() fixes up. Extend it to also apply to v2 sequences, this fixes the panel not working on the Acer Iconia One 8 A1-840. Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14605 Signed-off-by: Hans de Goede <hansg@kernel.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://lore.kernel.org/r/20250703143824.7121-1-hansg@kernel.org Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-07-08Merge tag 'drm-intel-next-2025-07-04' of ↵Simona Vetter
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next drm/i915 feature pull #2 for v6.17: Features and functionality: - Add drm_panic support for both i915 and xe drivers (Jocelyn Falempe) - Add initial flip queue implementation, disabled by default, for LNL and PTL (Ville) - Add support for Wildcat Lake (WCL) display, version 30.02 (Matt Roper, Matt Atwood, Dnyaneshwar) - Extend drm_panel and follower support to DDI eDP (Arun) Refactoring and cleanups: - Make all global state objects opaque (Jani) - Move display works to display specific unordered workqueue (Luca) - Add and use struct drm_device based pcode interface (Jani, Lucas) - Use clamp() instead of max()+min() combo (Ankit) - Simplify wait for power well disable (Jani) - Various stylistics cleanups and renames (Jani) Fixes: - Deal with loss of pipe DMC state (Ville) - Fix PTL HDCP2 stream status check (Suraj) - Add workaround for ADL-P DKL PHY DP and HDMI (Nemesa) - Fix skl_print_wm_changes() stack usage with KMSAN (Arnd Bergmann) - Fix PCON capability reads on non-branch devices (Chaitanya) - Fix which platforms have ultra joiner (Ankit) DRM core changes: - Add ttm_bo_kmap_try_from_panic() for xe drm_panic support (Jocelyn Falempe) - Add private pointer to struct drm_scanout buffer for xe/i915 drm_panic support (Jocelyn Falempe) Merges: - Backmerge drm-next for drm_panel and xe changes (Jani) Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/6d728bf6ef23681b00dfbc7da9aeae41042dee02@intel.com
2025-07-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Cross-merge networking fixes after downstream PR (net-6.16-rc5). No conflicts. No adjacent changes. Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-04Merge tag 'drm-misc-next-2025-07-03' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for 6.17: UAPI Changes: Cross-subsystem Changes: Core Changes: - bridge: More reference counting - dp: Implement backlight control helpers - fourcc: Add half-float and 32b float formats, RGB161616, BGR161616 - mipi-dsi: Drop MIPI_DSI_MODE_VSYNC_FLUSH flag - ttm: Improve eviction Driver Changes: - i915: Use backlight control helpers for eDP - tidss: Add AM65x OLDI bridge support - panels: - panel-edp: Add CMN N116BCJ-EAK support - raydium-rm67200: misc cleanups, optional reset - new panel: DJN HX83112B Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@redhat.com> Link: https://lore.kernel.org/r/20250703-chirpy-lilac-dalmatian-2c5838@houat
2025-07-04Merge tag 'drm-intel-gt-next-2025-07-02' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next Driver Changes: Fixes/improvements/new stuff: - Avoid GuC scheduling stalls [guc] (Julia Filipchuk) - Remove force_probe requirement for DG1 (Ville Syrjälä) - Handle errors correctly to avoid losing GuC-2-Host messages [guc] (Jesus Narvaez) - Avoid double wakeref put if GuC context deregister failed [guc] (Jesus Narvaez) - Avoid timeline memory leak with signals and legacy platforms [ringbuf] (Janusz Krzysztofik) - Fix MEI (discrete) interrupt handler on RT kernels [gsc] (Junxiao Chang) Miscellaneous: - Allow larger memory allocation [selftest] (Mikolaj Wasiak) - Use provided dma_fence_is_chain (Tvrtko Ursulin) - Fix build error with GCOV and AutoFDO enabled [pmu] (Tzung-Bi Shih) - Fix build error some more (Arnd Bergmann) - Reduce stack usage in igt_vma_pin1() (Arnd Bergmann) - Move out engine related macros from i915_drv.h (Krzysztof Karas) - Move GEM_QUIRK_PIN_SWIZZLED_PAGES to i915_gem.h (Krzysztof Karas) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Tvrtko Ursulin <tursulin@igalia.com> Link: https://lore.kernel.org/r/aGTjUBeOQFw26bRT@linux
2025-07-02drm/i915/power: use intel_de_wait_for_clear() instead of wait_for()Jani Nikula
Prefer the register read specific wait function over i915 wait_for_us(). The existing condition is quite complicated. Simplify by checking for requesters first, and determine timeout based on that. Refresh requesters in case of timeouts, should one have popped up during the wait. The downside is that this does not cut the wait short if requesters show up *during* the wait, but we're talking about 1 ms so shouldn't be an issue. v2: Refresh requesters only if there were none before (Imre) Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://lore.kernel.org/r/20250626192632.2330349-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-07-01drm/i915/display: drop a number of dependencies on i915_drv.hJani Nikula
With the switch to an unordered workqueue dedicated to display, we've stopped using struct drm_i915_private in a number of places, and can drop the dependencies on i915_drv.h. Cc: Luca Coelho <luciano.coelho@intel.com> Reviewed-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://lore.kernel.org/r/20250626101636.1896365-1-jani.nikula@intel.com
2025-07-01drm/i915/fb: use struct intel_display for DISPLAY_VER()Jani Nikula
Convert a leftover struct drm_i915_private use to struct intel_display. Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://lore.kernel.org/r/20250626101712.1898434-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-07-01drm/i915/gsc: mei interrupt top half should be in irq disabled contextJunxiao Chang
MEI GSC interrupt comes from i915. It has top half and bottom half. Top half is called from i915 interrupt handler. It should be in irq disabled context. With RT kernel, by default i915 IRQ handler is in threaded IRQ. MEI GSC top half might be in threaded IRQ context. generic_handle_irq_safe API could be called from either IRQ or process context, it disables local IRQ then calls MEI GSC interrupt top half. This change fixes A380/A770 GPU boot hang issue with RT kernel. Fixes: 1e3dc1d8622b ("drm/i915/gsc: add gsc as a mei auxiliary device") Tested-by: Furong Zhou <furong.zhou@intel.com> Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Junxiao Chang <junxiao.chang@intel.com> Link: https://lore.kernel.org/r/20250425151108.643649-1-junxiao.chang@intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit dccf655f69002d496a527ba441b4f008aa5bebbf) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2025-07-01drm/i915/gt: Fix timeline left held on VMA alloc errorJanusz Krzysztofik
The following error has been reported sporadically by CI when a test unbinds the i915 driver on a ring submission platform: <4> [239.330153] ------------[ cut here ]------------ <4> [239.330166] i915 0000:00:02.0: [drm] drm_WARN_ON(dev_priv->mm.shrink_count) <4> [239.330196] WARNING: CPU: 1 PID: 18570 at drivers/gpu/drm/i915/i915_gem.c:1309 i915_gem_cleanup_early+0x13e/0x150 [i915] ... <4> [239.330640] RIP: 0010:i915_gem_cleanup_early+0x13e/0x150 [i915] ... <4> [239.330942] Call Trace: <4> [239.330944] <TASK> <4> [239.330949] i915_driver_late_release+0x2b/0xa0 [i915] <4> [239.331202] i915_driver_release+0x86/0xa0 [i915] <4> [239.331482] devm_drm_dev_init_release+0x61/0x90 <4> [239.331494] devm_action_release+0x15/0x30 <4> [239.331504] release_nodes+0x3d/0x120 <4> [239.331517] devres_release_all+0x96/0xd0 <4> [239.331533] device_unbind_cleanup+0x12/0x80 <4> [239.331543] device_release_driver_internal+0x23a/0x280 <4> [239.331550] ? bus_find_device+0xa5/0xe0 <4> [239.331563] device_driver_detach+0x14/0x20 ... <4> [357.719679] ---[ end trace 0000000000000000 ]--- If the test also unloads the i915 module then that's followed with: <3> [357.787478] ============================================================================= <3> [357.788006] BUG i915_vma (Tainted: G U W N ): Objects remaining on __kmem_cache_shutdown() <3> [357.788031] ----------------------------------------------------------------------------- <3> [357.788204] Object 0xffff888109e7f480 @offset=29824 <3> [357.788670] Allocated in i915_vma_instance+0xee/0xc10 [i915] age=292729 cpu=4 pid=2244 <4> [357.788994] i915_vma_instance+0xee/0xc10 [i915] <4> [357.789290] init_status_page+0x7b/0x420 [i915] <4> [357.789532] intel_engines_init+0x1d8/0x980 [i915] <4> [357.789772] intel_gt_init+0x175/0x450 [i915] <4> [357.790014] i915_gem_init+0x113/0x340 [i915] <4> [357.790281] i915_driver_probe+0x847/0xed0 [i915] <4> [357.790504] i915_pci_probe+0xe6/0x220 [i915] ... Closer analysis of CI results history has revealed a dependency of the error on a few IGT tests, namely: - igt@api_intel_allocator@fork-simple-stress-signal, - igt@api_intel_allocator@two-level-inception-interruptible, - igt@gem_linear_blits@interruptible, - igt@prime_mmap_coherency@ioctl-errors, which invisibly trigger the issue, then exhibited with first driver unbind attempt. All of the above tests perform actions which are actively interrupted with signals. Further debugging has allowed to narrow that scope down to DRM_IOCTL_I915_GEM_EXECBUFFER2, and ring_context_alloc(), specific to ring submission, in particular. If successful then that function, or its execlists or GuC submission equivalent, is supposed to be called only once per GEM context engine, followed by raise of a flag that prevents the function from being called again. The function is expected to unwind its internal errors itself, so it may be safely called once more after it returns an error. In case of ring submission, the function first gets a reference to the engine's legacy timeline and then allocates a VMA. If the VMA allocation fails, e.g. when i915_vma_instance() called from inside is interrupted with a signal, then ring_context_alloc() fails, leaving the timeline held referenced. On next I915_GEM_EXECBUFFER2 IOCTL, another reference to the timeline is got, and only that last one is put on successful completion. As a consequence, the legacy timeline, with its underlying engine status page's VMA object, is still held and not released on driver unbind. Get the legacy timeline only after successful allocation of the context engine's VMA. v2: Add a note on other submission methods (Krzysztof Karas): Both execlists and GuC submission use lrc_alloc() which seems free from a similar issue. Fixes: 75d0a7f31eec ("drm/i915: Lift timeline into intel_context") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12061 Cc: Chris Wilson <chris.p.wilson@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Krzysztof Karas <krzysztof.karas@intel.com> Reviewed-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com> Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com> Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Reviewed-by: Nitin Gote <nitin.r.gote@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://lore.kernel.org/r/20250611104352.1014011-2-janusz.krzysztofik@linux.intel.com (cherry picked from commit cc43422b3cc79eacff4c5a8ba0d224688ca9dd4f) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2025-06-30drm/i915/gsc: mei interrupt top half should be in irq disabled contextJunxiao Chang
MEI GSC interrupt comes from i915. It has top half and bottom half. Top half is called from i915 interrupt handler. It should be in irq disabled context. With RT kernel, by default i915 IRQ handler is in threaded IRQ. MEI GSC top half might be in threaded IRQ context. generic_handle_irq_safe API could be called from either IRQ or process context, it disables local IRQ then calls MEI GSC interrupt top half. This change fixes A380/A770 GPU boot hang issue with RT kernel. Fixes: 1e3dc1d8622b ("drm/i915/gsc: add gsc as a mei auxiliary device") Tested-by: Furong Zhou <furong.zhou@intel.com> Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Junxiao Chang <junxiao.chang@intel.com> Link: https://lore.kernel.org/r/20250425151108.643649-1-junxiao.chang@intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-06-30drm/i915/backlight: Use drm_edp_backlight_enableSuraj Kandpal
Use drm dp helper to enable backlight now that it has been modified to set PANEL_LUMINANCE_CONTROL_ENABLE bit based on if capability supports it and the driver wants it. Remove the dead code. Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Link: https://lore.kernel.org/r/20250620063445.3603086-14-suraj.kandpal@intel.com
2025-06-30drm/i915/backlight: Use drm helper to set edp backlightSuraj Kandpal
Now that the drm helper sets the backlight using luminance too we can use that. Remove the obselete function. Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Link: https://lore.kernel.org/r/20250620063445.3603086-13-suraj.kandpal@intel.com
2025-06-30drm/i915/backlight: Use drm helper to initialize edp backlightSuraj Kandpal
Now that drm_edp_backlight init has been modified to take into account the setup of lumininace based brightness manipulation we can just use that. --v2 -Fix commit message [Arun] Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Link: https://lore.kernel.org/r/20250620063445.3603086-12-suraj.kandpal@intel.com
2025-06-30drm/dp: Change current_level argument type to u32Suraj Kandpal
Change the current_level argument type to u32 from u16 since it can now carry the value which it gets from DP_EDP_PANEL_TARGET_LUMINANCE_VALUE. Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Link: https://lore.kernel.org/r/20250620063445.3603086-6-suraj.kandpal@intel.com
2025-06-30drm/dp: Add argument for max luminance in drm_edp_backlight_initSuraj Kandpal
Add new argument to drm_edp_backlight_init which gives the max_luminance which will be needed to set the max values for backlight. --v2 -Use pass only max luminance instead of luminance_range_info struct [Arun] Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Link: https://lore.kernel.org/r/20250620063445.3603086-4-suraj.kandpal@intel.com
2025-06-30drm/dp: Add argument in drm_edp_backlight_initSuraj Kandpal
Add bool argument in drm_edp_backlight init to provide the drivers option to choose if they want to use luminance values to manipulate brightness. Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Link: https://lore.kernel.org/r/20250620063445.3603086-3-suraj.kandpal@intel.com
2025-06-30drm/i915/gt: Fix timeline left held on VMA alloc errorJanusz Krzysztofik
The following error has been reported sporadically by CI when a test unbinds the i915 driver on a ring submission platform: <4> [239.330153] ------------[ cut here ]------------ <4> [239.330166] i915 0000:00:02.0: [drm] drm_WARN_ON(dev_priv->mm.shrink_count) <4> [239.330196] WARNING: CPU: 1 PID: 18570 at drivers/gpu/drm/i915/i915_gem.c:1309 i915_gem_cleanup_early+0x13e/0x150 [i915] ... <4> [239.330640] RIP: 0010:i915_gem_cleanup_early+0x13e/0x150 [i915] ... <4> [239.330942] Call Trace: <4> [239.330944] <TASK> <4> [239.330949] i915_driver_late_release+0x2b/0xa0 [i915] <4> [239.331202] i915_driver_release+0x86/0xa0 [i915] <4> [239.331482] devm_drm_dev_init_release+0x61/0x90 <4> [239.331494] devm_action_release+0x15/0x30 <4> [239.331504] release_nodes+0x3d/0x120 <4> [239.331517] devres_release_all+0x96/0xd0 <4> [239.331533] device_unbind_cleanup+0x12/0x80 <4> [239.331543] device_release_driver_internal+0x23a/0x280 <4> [239.331550] ? bus_find_device+0xa5/0xe0 <4> [239.331563] device_driver_detach+0x14/0x20 ... <4> [357.719679] ---[ end trace 0000000000000000 ]--- If the test also unloads the i915 module then that's followed with: <3> [357.787478] ============================================================================= <3> [357.788006] BUG i915_vma (Tainted: G U W N ): Objects remaining on __kmem_cache_shutdown() <3> [357.788031] ----------------------------------------------------------------------------- <3> [357.788204] Object 0xffff888109e7f480 @offset=29824 <3> [357.788670] Allocated in i915_vma_instance+0xee/0xc10 [i915] age=292729 cpu=4 pid=2244 <4> [357.788994] i915_vma_instance+0xee/0xc10 [i915] <4> [357.789290] init_status_page+0x7b/0x420 [i915] <4> [357.789532] intel_engines_init+0x1d8/0x980 [i915] <4> [357.789772] intel_gt_init+0x175/0x450 [i915] <4> [357.790014] i915_gem_init+0x113/0x340 [i915] <4> [357.790281] i915_driver_probe+0x847/0xed0 [i915] <4> [357.790504] i915_pci_probe+0xe6/0x220 [i915] ... Closer analysis of CI results history has revealed a dependency of the error on a few IGT tests, namely: - igt@api_intel_allocator@fork-simple-stress-signal, - igt@api_intel_allocator@two-level-inception-interruptible, - igt@gem_linear_blits@interruptible, - igt@prime_mmap_coherency@ioctl-errors, which invisibly trigger the issue, then exhibited with first driver unbind attempt. All of the above tests perform actions which are actively interrupted with signals. Further debugging has allowed to narrow that scope down to DRM_IOCTL_I915_GEM_EXECBUFFER2, and ring_context_alloc(), specific to ring submission, in particular. If successful then that function, or its execlists or GuC submission equivalent, is supposed to be called only once per GEM context engine, followed by raise of a flag that prevents the function from being called again. The function is expected to unwind its internal errors itself, so it may be safely called once more after it returns an error. In case of ring submission, the function first gets a reference to the engine's legacy timeline and then allocates a VMA. If the VMA allocation fails, e.g. when i915_vma_instance() called from inside is interrupted with a signal, then ring_context_alloc() fails, leaving the timeline held referenced. On next I915_GEM_EXECBUFFER2 IOCTL, another reference to the timeline is got, and only that last one is put on successful completion. As a consequence, the legacy timeline, with its underlying engine status page's VMA object, is still held and not released on driver unbind. Get the legacy timeline only after successful allocation of the context engine's VMA. v2: Add a note on other submission methods (Krzysztof Karas): Both execlists and GuC submission use lrc_alloc() which seems free from a similar issue. Fixes: 75d0a7f31eec ("drm/i915: Lift timeline into intel_context") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12061 Cc: Chris Wilson <chris.p.wilson@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Krzysztof Karas <krzysztof.karas@intel.com> Reviewed-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com> Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com> Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Reviewed-by: Nitin Gote <nitin.r.gote@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://lore.kernel.org/r/20250611104352.1014011-2-janusz.krzysztofik@linux.intel.com
2025-06-30drm/i915/display: Fix macro HAS_ULTRAJOINERAnkit Nautiyal
Currently, Ultrajoiner is supported only on Xe2_HPD. Update the HAS_ULTRAJOINER macro to reflect the same. v2: Clarify the commit message to specify platform. (Jani) Bspec: 69556 Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Karthik B S <karthik.b.s@intel.com> Link: https://lore.kernel.org/r/20250611053039.377695-1-ankit.k.nautiyal@intel.com
2025-06-30drm/i915/dsi: Fix NULL pointer deref in vlv_dphy_param_init()Hans de Goede
Commit 77ba0b856225 ("drm/i915/dsi: convert vlv_dsi.[ch] to struct intel_display") added a to_intel_display(connector) call to vlv_dphy_param_init() but when vlv_dphy_param_init() gets called the connector object has not been initialized yet, so this leads to a NULL pointer deref: BUG: kernel NULL pointer dereference, address: 000000000000000c ... Hardware name: ASUSTeK COMPUTER INC. T100TA/T100TA, BIOS T100TA.314 08/13/2015 RIP: 0010:vlv_dsi_init+0x4e6/0x1600 [i915] ... Call Trace: <TASK> ? intel_step_name+0x4be8/0x5c30 [i915] intel_setup_outputs+0x2d6/0xbd0 [i915] intel_display_driver_probe_nogem+0x13f/0x220 [i915] i915_driver_probe+0x3d9/0xaf0 [i915] Use to_intel_display(&intel_dsi->base) instead to fix this. Fixes: 77ba0b856225 ("drm/i915/dsi: convert vlv_dsi.[ch] to struct intel_display") Signed-off-by: Hans de Goede <hansg@kernel.org> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://lore.kernel.org/r/20250626143317.101706-1-hansg@kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 0dc6bfb50a5d0759e726cd36a3d3b7529fd2a627) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2025-06-30drm/i915/selftests: Change mock_request() to return error pointersDan Carpenter
There was an error pointer vs NULL bug in __igt_breadcrumbs_smoketest(). The __mock_request_alloc() function implements the smoketest->request_alloc() function pointer. It was supposed to return error pointers, but it propogates the NULL return from mock_request() so in the event of a failure, it would lead to a NULL pointer dereference. To fix this, change the mock_request() function to return error pointers and update all the callers to expect that. Fixes: 52c0fdb25c7c ("drm/i915: Replace global breadcrumbs with per-context interrupt tracking") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://lore.kernel.org/r/685c1417.050a0220.696f5.5c05@mx.google.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 778fa8ad5f0f23397d045c7ebca048ce8def1c43) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2025-06-29sanitize handling of long-term internal mountsAl Viro
Original rationale for those had been the reduced cost of mntput() for the stuff that is mounted somewhere. Mount refcount increments and decrements are frequent; what's worse, they tend to concentrate on the same instances and cacheline pingpong is quite noticable. As the result, mount refcounts are per-cpu; that allows a very cheap increment. Plain decrement would be just as easy, but decrement-and-test is anything but (we need to add the components up, with exclusion against possible increment-from-zero, etc.). Fortunately, there is a very common case where we can tell that decrement won't be the final one - if the thing we are dropping is currently mounted somewhere. We have an RCU delay between the removal from mount tree and dropping the reference that used to pin it there, so we can just take rcu_read_lock() and check if the victim is mounted somewhere. If it is, we can go ahead and decrement without and further checks - the reference we are dropping is not the last one. If it isn't, we get all the fun with locking, carefully adding up components, etc., but the majority of refcount decrements end up taking the fast path. There is a major exception, though - pipes and sockets. Those live on the internal filesystems that are not going to be mounted anywhere. They are not going to be _un_mounted, of course, so having to take the slow path every time a pipe or socket gets closed is really obnoxious. Solution had been to mark them as long-lived ones - essentially faking "they are mounted somewhere" indicator. With minor modification that works even for ones that do eventually get dropped - all it takes is making sure we have an RCU delay between clearing the "mounted somewhere" indicator and dropping the reference. There are some additional twists (if you want to drop a dozen of such internal mounts, you'd be better off with clearing the indicator on all of them, doing an RCU delay once, then dropping the references), but in the basic form it had been * use kern_mount() if you want your internal mount to be a long-term one. * use kern_unmount() to undo that. Unfortunately, the things did rot a bit during the mount API reshuffling. In several cases we have lost the "fake the indicator" part; kern_unmount() on the unmount side remained (it doesn't warn if you use it on a mount without the indicator), but all benefits regaring mntput() cost had been lost. To get rid of that bitrot, let's add a new helper that would work with fs_context-based API: fc_mount_longterm(). It's a counterpart of fc_mount() that does, on success, mark its result as long-term. It must be paired with kern_unmount() or equivalents. Converted: 1) mqueue (it used to use kern_mount_data() and the umount side is still as it used to be) 2) hugetlbfs (used to use kern_mount_data(), internal mount is never unmounted in this one) 3) i915 gemfs (used to be kern_mount() + manual remount to set options, still uses kern_unmount() on umount side) 4) v3d gemfs (copied from i915) Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2025-06-27drm/i915/flipq: Add intel_flipq_dump()Ville Syrjälä
Add a function for dumping the entries of a specific flip queue. Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250624170049.27284-9-ville.syrjala@linux.intel.com
2025-06-27drm/i915/flipq: Implement Wa_18034343758Ville Syrjälä
Implement the driver side of Wa_18034343758, which is supposed to prevent the DSB and DMC from accessing registers in parallel, and thus potentially corrupting the registers due to a hardware issue (which should be fixed in PTL-B0). The w/a sequence goes as follows: DMC starts the DSB | \ DMC halts itself | DSB waits a while for DMC to have time to halt . | DSB executes normally . | DSB unhalts the DMC at the very end . / DMC resumes execution v2: PTL-B0+ firmware no longer has the w/a since the hw got fixed v3: Do the w/a on all PTL for now since we only have the A0 firmware binaries which issues the halt instructions unconditionally v4: PTL DMC binaries do in fact have the A0 vs. B0 split, so skip the w/a on PTL-B0+ Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250624170049.27284-7-ville.syrjala@linux.intel.com
2025-06-27drm/i915/flipq: Implement flip queue based commit pathVille Syrjälä
Support commits via the flip queue (as opposed to DSB or MMIO). As it's somewhat unknown if we can actually use it is currently gated behind the new use_flipq modparam, which defaults to disabled. The implementation has a bunch of limitations that would need real though to solve: - disabled when PSR is used - disabled when VRR is used - color management updates not performed via the flip queue v2: Don't use flip queue if there is no dmc v3: Use intel_flipq_supported() v3: Configure PKG_C_LATENCY appropriately Ignore INT_VECTOR if there is a real PIPEDMC interrupt (nothing in the hw appears to clear INT_VECTOR) v4: Leave added_wake_time=0 when flip queue isn't used, to avoid needleslly increasing pkg_c_latency on lnl/ptl due to Wa_22020432604. This is a bit racy though... Use IS_DISPLAY_VER() Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250624170049.27284-6-ville.syrjala@linux.intel.com
2025-06-27drm/i915/flipq: Provide the nuts and bolts code for flip queueVille Syrjälä
Provide the lower level code for PIPEDMC based flip queue. We'll use the so called semi-full flip queue mode where the PIPEDMC will start the provided DSB on a scanline a little ahead of the vblank. We need to program the triggering scanline early enough so that the DSB has enough time to complete writing all the double buffered registers before they get latched (at start of vblank). The firmware implements several queues: - 3 "plane queues" which execute a single DSB per entry - 1 "general queue" which can apparently execute 2 DSBs per entry - 1 vestigial "fast queue" that replaced the "simple flip queue" on ADL+, but this isn't supposed to be used due to issues. But we only need a single plane queue really, and we won't actually use it as a real queue because we don't allow queueing multiple commits ahead of time. So the whole thing is perhaps useless. I suppose there migth be some power saving benefits if we would get the flip scheduled by userspace early and then could keep some hardware powered off a bit longer until the DMC kicks off the flipq programming. But that is pure speculation at this time and needs to be proven. The code to hook up the flip queue into the actual atomic commit path will follow later. TODO: need to think how to do the "wait for DMC firmware load" nicely need to think about VRR and PSR etc. v2: Don't write DMC_FQ_W2_PTS_CFG_SEL on pre-lnl Don't oops at flipq init if there is no dmc v3: Adapt to PTL+ flipq changes (different queue entry layout, different trigger event, need VRR TG) Use the actual CDCLK frequency Ask the DSB code how long things are expected to take v3: Adjust the cdclk rounding (docs are 100% vague, Windows rounds like this) Initialize some undocumented magic DMC variables on PTL v4: Use PIPEDMC_FQ_STATUS for busy check (the busy bit in PIPEDMC_FQ_CTRL is apparently gone on LNL+) Based the preempt timeout on the max exec time Preempt before disabling the flip queue Order the PIPEDMC_SCANLINECMP* writes a bit more carefully Fix some typos v5: Try to deal with some clang-20 div-by-zero false positive (Nathan) Add some docs (Jani) Cc: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> epr Link: https://patchwork.freedesktop.org/patch/msgid/20250624170049.27284-5-ville.syrjala@linux.intel.com
2025-06-27drm/i915/dmc: Define flip queue related PIPEDMC registersVille Syrjälä
Add the register definitions for a bunch of flip queue related PIPEDMC registers. v2: The layout of flip queue entries changed on PTL Bump the DMC_FQ_W2_PTS_CFG_SEL bitfields sizes (Uma) Reduce the scanlines to 21 bits for now (Uma) v3: Also define some undocumented DMC variables we need on PTL v3: Drop PIPEDMC_FQ_CTRL_BUSY as it seems to no longer exist on LNL+ Fix up some typos Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250624170049.27284-4-ville.syrjala@linux.intel.com
2025-06-27drm/i915: Try to program PKG_C_LATENCY more correctlyVille Syrjälä
The current PKG_C_LATENCY stuff looks busted in several ways: - doesn't account for multiple pipes from different commits correctly - WM_LINETIME is in units of 0.125usec, PKG_C_LATENCY wants units on 1 usec - weird VRR state stuff being checked - use of pointless RMW Fix it all up. Note that it's still a bit unclear how all this works, especially how the added_wake_time ties into the flipq triggers in DMC, and how we need to sequence updates to PKG_C_LATENCY when enabling/disabling pipes/etc. We may also need to think what to about the WM1+ disabling and the related PSR chicken bits when we can use PKG_C_LATENCY for early wake... Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250624170049.27284-3-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2025-06-27drm/i915: Set PKG_C_LATENCY.added_wake_time to 0Ville Syrjälä
AFAIK PKG_C_LATENCY.added_wake_time only matters for flip queue. As long as we're not using that there's no point in adding any extra wake time. Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250624170049.27284-2-ville.syrjala@linux.intel.com
2025-06-27drm/i915/dsi: Fix NULL pointer deref in vlv_dphy_param_init()Hans de Goede
Commit 77ba0b856225 ("drm/i915/dsi: convert vlv_dsi.[ch] to struct intel_display") added a to_intel_display(connector) call to vlv_dphy_param_init() but when vlv_dphy_param_init() gets called the connector object has not been initialized yet, so this leads to a NULL pointer deref: BUG: kernel NULL pointer dereference, address: 000000000000000c ... Hardware name: ASUSTeK COMPUTER INC. T100TA/T100TA, BIOS T100TA.314 08/13/2015 RIP: 0010:vlv_dsi_init+0x4e6/0x1600 [i915] ... Call Trace: <TASK> ? intel_step_name+0x4be8/0x5c30 [i915] intel_setup_outputs+0x2d6/0xbd0 [i915] intel_display_driver_probe_nogem+0x13f/0x220 [i915] i915_driver_probe+0x3d9/0xaf0 [i915] Use to_intel_display(&intel_dsi->base) instead to fix this. Fixes: 77ba0b856225 ("drm/i915/dsi: convert vlv_dsi.[ch] to struct intel_display") Signed-off-by: Hans de Goede <hansg@kernel.org> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://lore.kernel.org/r/20250626143317.101706-1-hansg@kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-06-27drm/i915/psr: Add intel_psr2_panic_force_full_updateJocelyn Falempe
When the panic handler is called, configure the psr to send the full framebuffer to the monitor, otherwise the panic screen is only partially visible. Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://lore.kernel.org/r/20250624091501.257661-12-jfalempe@redhat.com Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 09:43:23 +0000