| Age | Commit message (Collapse) | Author |
|---|
|
Provide the lower level code for PIPEDMC based flip queue.
We'll use the so called semi-full flip queue mode where the
PIPEDMC will start the provided DSB on a scanline a little
ahead of the vblank. We need to program the triggering scanline
early enough so that the DSB has enough time to complete writing
all the double buffered registers before they get latched (at
start of vblank).
The firmware implements several queues:
- 3 "plane queues" which execute a single DSB per entry
- 1 "general queue" which can apparently execute 2 DSBs per entry
- 1 vestigial "fast queue" that replaced the "simple flip queue"
on ADL+, but this isn't supposed to be used due to issues.
But we only need a single plane queue really, and we won't actually
use it as a real queue because we don't allow queueing multiple commits
ahead of time. So the whole thing is perhaps useless. I suppose
there migth be some power saving benefits if we would get the flip
scheduled by userspace early and then could keep some hardware powered
off a bit longer until the DMC kicks off the flipq programming. But that
is pure speculation at this time and needs to be proven.
The code to hook up the flip queue into the actual atomic commit
path will follow later.
TODO: need to think how to do the "wait for DMC firmware load" nicely
need to think about VRR and PSR
etc.
v2: Don't write DMC_FQ_W2_PTS_CFG_SEL on pre-lnl
Don't oops at flipq init if there is no dmc
v3: Adapt to PTL+ flipq changes (different queue entry
layout, different trigger event, need VRR TG)
Use the actual CDCLK frequency
Ask the DSB code how long things are expected to take
v3: Adjust the cdclk rounding (docs are 100% vague, Windows
rounds like this)
Initialize some undocumented magic DMC variables on PTL
v4: Use PIPEDMC_FQ_STATUS for busy check (the busy bit in
PIPEDMC_FQ_CTRL is apparently gone on LNL+)
Based the preempt timeout on the max exec time
Preempt before disabling the flip queue
Order the PIPEDMC_SCANLINECMP* writes a bit more carefully
Fix some typos
v5: Try to deal with some clang-20 div-by-zero false positive (Nathan)
Add some docs (Jani)
Cc: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
epr
Link: https://patchwork.freedesktop.org/patch/msgid/20250624170049.27284-5-ville.syrjala@linux.intel.com
|
|
I'll need to examine the crtc state during intel_dmc_enable_pipe().
To that end pass the whole crtc into intel_dmc_{enable,disable}_pipe().
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250617170759.19552-9-ville.syrjala@linux.intel.com
|
|
Currently we have some asserts to make sure the main DMC has been
loaded. Add similar asserts for the pipe DMCs. And we might as well
just check all the mmio registers the firmware has asked us to
initialize. That also covers the hardcoded SSP/HTP registers we were
checking for the main DMC.
TODO: Maybe always configure DMC_EVT_CTL_ENABLE the way the firmware
has it set so that we wouldn't need to special case in the assert?
v2: Also assert in intel_dmc_load_program()
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250617170759.19552-8-ville.syrjala@linux.intel.com
|
|
Hook up PIPEDMC interrupts. We'll need these for:
- flip queue signalling
- GTT/ATS faults on LNL+
- unclaimed register access errors (supposedly that is what
the error interrupt indicated according to Windows code).
On LNL+ we get a new level of interrupts registers PIPEDMC_INTERRUPT*.
On earlier platforms we only have the INT_VECTOR field in the
PIPEDMC_STATUS registers, whose values are defined by the firmware.
For now we'll enable the interrupts on LNL+ only. For earlier platforms
it's not clear that there is any use for these interrupts, and some
ADL machines have exhibited spurious DE_PIPE interrupts with the
PIPEDMC interrupts unmasked/enabled. We can revisit enabling these
for earlier platforms in the future.
For some unknown reason LNL pipe B triggers the error interrupt
during the first DC state transition (subsequent transitions are
maybe OK?). No clear idea what's going on here yet, so keep the
error interrupt disabled for now.
Similar to DSB interrupt registers, the unused bits in
PIPEDMC_INTERRUPT* seem to act like randomg r/w bits (instead
of being hardwired to 0 like one would expect), and so we'll try
to avoid setting them so that we don't mistake them for real
interrupts.
v2: Only enable/unmask for LNL+
Keep the flip queue interrupt masked off for now since
we don't have a use for it yet
v3: Also keep the error interrupt masked off for now due to
LNL pipe B triggering it
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250514174257.8708-1-ville.syrjala@linux.intel.com
|
|
Add interface to control if package C exit starts at the start of the
undelayed vblank. This is needed to implement workaround for underrun on
idle PSR HW issue (Wa_16025596647).
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250414100508.1208774-11-jouni.hogander@intel.com
|
|
Add interface to block PKG C-state. This is needed to implement workaround
for underrun on idle PSR HW issue (Wa_16025596647).
Bspec: 74151
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250414100508.1208774-6-jouni.hogander@intel.com
|
|
Starting from MTL we don't have a platform agnostic way to validate
DC6 state due to dc6 counter has been removed to validate DC state.
The goal is to validate that the display HW can reach the DC6 power
state. There is no HW DC6 residency counter (and there wasn't such
a counter earlier either), so an alternative way is required. According
to the HW team the display driver has programmed everything correctly in
order to allow the DC6 power state if the DC5 power state is reached
(indicated by the HW DC5 residency counter incrementing) and DC6 is
enabled by the driver.
Driver could take a snapshot of the DC5 residency counter right
after it enables DC6 (dc5_residency_start) and increment the SW
DC6 residency counter right before it disables DC6 or when user space
reads the DC6 counter. So the driver would update the counter at these
two points in the following way:
dc6_residency_counter += dc5_current_count - dc5_start_count
v2: Update the discription. (Imre)
Read dc5 count during dc6 enable and disable then and update
dc6 residency counter. (Imre)
Remove variable from dmc structure. (Jani)
Updated the subject title.
v3: Add i915_power_domains lock to updated dc6 count in debugfs. (Imre)
Use flags to check dc6 enable/disable states. (Imre)
Move the display version check and counter read/update to
a helper. (Imre)
Resize the variable length. (Rodrigo)
Use old dc6 debugfs entry for every platform. (Rodrigo)
v4: Remove superfluous whitespace. (Jani)
Read DMC registers in intel_dmc.c (Jani)
Rename dc6_en_dis to dc6_enabled and change its type to bool. (Jani)
Rename update_dc6_count and move it to intel_dmc.c (Jani)
Rename dc6_en_dis to start_tracking. (Imre)
Have lock for dc6 state read aswelll. (Imre)
Keep the existing way print 'DC5 -> DC6 count' along with
new 'DC6 Allowed Count' print. (Imre)
Add counters in intel_dmc struct. (Imre)
Have interface to return dc6 allowed count. (Imre)
Rename dc6_count to dc6_allowed_count. (Rodrigo)
v5: Rename counters and move in to dc6_allowed structure. (Imre)
Order declaration lines in decreasing line length. (Imre)
Update start_tacking logic. (Imre)
Move get couner inside lock and DISPLAY_VER code to helper. (Imre)
v6: Change intel_dmc_get_dc6_allowed_count return type to bool. (Imre)
Update debugfs print to better allien with old print. (Imre)
Remove braces at if/else for signle line statements. (Imre)
v7: Remove in line variable declaration. (Imre)
v8: Rebase the changes.
Signed-off-by: Mohammed Thasleem <mohammed.thasleem@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250321123707.287745-1-mohammed.thasleem@intel.com
|
|
Convert dmc error state printing to new snapshot capture/print division.
v2: Rebase
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9116319e7faceeed7695ee35e56fe001ddf94e11.1726151571.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
struct intel_display will replace struct drm_i915_private as
the main thing for display code. Convert the DMC code to
use it (as much as possible at this stage).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240906143306.15937-7-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Use the regular drm printer, so we can drop the i915_error_printf()
usage.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240606140705.3072987-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
sizeof(struct intel_dmc) > 1024 bytes, allocated on all platforms as
part of struct drm_i915_private, whether they have DMC or not.
Allocate struct intel_dmc dynamically, and hide all the dmc details
behind an opaque pointer in intel_dmc.c.
Care must be taken to take into account all cases: DMC not supported on
the platform, DMC supported but not initialized, and DMC initialized but
not loaded. For the second case, we need to move the wakeref out of
struct intel_dmc.
v2:
- Rebase to kzalloc dmc after runtime pm get (Imre)
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230301122944.1298929-4-jani.nikula@intel.com
|
|
Start preparing for dynamically allocated struct intel_dmc by adding
i915_to_dmc() and dmc->i915, and using them. Take the future NULL dmc
pointer into account already now, and add separate logging for
initialization in the DMC debugfs.
v3:
- Obtain runtime pm reference first (Imre)
v2:
- Don't reduce debugfs output (Imre)
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230301122944.1298929-3-jani.nikula@intel.com
|
|
There's only one reference to the struct intel_dmc members dc_state,
target_dc_state, and allowed_dc_mask within intel_dmc.c, begging the
question why they are under struct intel_dmc to begin with.
Moreover, the only references to i915->display.dmc outside of
intel_dmc.c are to these members.
They don't belong. Move them from struct intel_dmc to struct
i915_power_domains, which seems like a more suitable place.
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230301122944.1298929-1-jani.nikula@intel.com
|
|
The ucode part in the init, fini, suspend and resume function names is
just unnecessary. Drop it.
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230207110619.1821992-1-jani.nikula@intel.com
|
|
Clarify DMC ID usage by adding enum intel_dmc_id name to the enum, and
use dmc_id as the variable name for it throughout.
Convert a switch-case to if-ladder to avoid warnings about not handling
DMC_FW_MAX enumeration constant in the switch-case.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6912ccb411bb957c68c108b774745dbc7e0cbdc2.1675339447.git.jani.nikula@intel.com
|
|
Make sure that PIPEDMCs are enabled whenever the corresponding pipe is
enabled.
This is required at least by the latest ADLP v2.18 firmware, which adds
a new handler enabled by default and running whenever the pipe is
enabled at the vertical referesh rate.
Bspec: 50344, 67620
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230102183324.862279-1-imre.deak@intel.com
|
|
Currently, i915 interacts with the Hardware and not with any DMC
ABI/API, so the API is fixed within the platform, hence no need to get
this so-tied version requirement.
v2:
- Use link to firmware guide from kernel documentation for
"References:" instead of mailing list thread. (Rodrigo)
- Provide a more elaborate justification in the commit message.
(Rodrigo)
References: https://www.kernel.org/doc/html/v6.1/driver-api/firmware/firmware-usage-guidelines.html
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221230182422.29680-2-gustavo.sousa@intel.com
|
|
Disable the DMC event handlers before loading the firmware and after
uninitializing the display, to make sure the firmware is inactive. This
matches the Bspec "Sequences for Display C5 and C6" page for GEN12+.
Add a TODO comment for doing the same on pre-GEN12 platforms.
v2:
- Add a macro for the number of event handlers.
- Disable the event handlers only on GEN12+.
- s/dev_priv/i915/ in docbook comment.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20220728081440.1676857-1-imre.deak@intel.com
|
|
The macros are now only needed within intel_dmc.c, so move them there.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220330113417.220964-2-jani.nikula@intel.com
|
|
Only intel_dmc.c should be accessing dmc details directly.
Need to add an i915_error_printf() stub for
CONFIG_DRM_I915_CAPTURE_ERROR=n.
v2: Add the stub (kernel test robot <lkp@intel.com>)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> # v1
Link: https://patchwork.freedesktop.org/patch/msgid/20220330113417.220964-1-jani.nikula@intel.com
|
|
Continue localizing DMC register and data access to intel_dmc.c.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3b7bc0fc117b030d59dd74891af104c165bf9b39.1647870374.git.jani.nikula@intel.com
|
|
Start localizing DMC register and data access to intel_dmc.c.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4b96fe56c9c01bc671992dd6fe619638b157878f.1647870374.git.jani.nikula@intel.com
|
|
Several of our i915 header files, have been including i915_reg.h. This
means that any change to i915_reg.h will trigger a full rebuild of
pretty much every file of the driver, even those that don't have any
kind of register access. Let's delete the i915_reg.h include from all
headers and add an explicit include from the .c files that truly
need the register definitions; those that need a definition of
i915_reg_t for a function definition can get it from i915_reg_defs.h
instead.
We also remove two non-register #define's (VLV_DISPLAY_BASE and
GEN12_SFC_DONE_MAX) into i915_reg_defs.h to allow us to drop the
i915_reg.h include from a couple of headers.
There's probably a lot more header dependency optimization possible, but
the changes here roughly cut the number of files compiled after 'touch
i915_reg.h' in half --- a good first step.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-7-matthew.d.roper@intel.com
|
|
So far we had support for main, PipeA and PipeB
DMC. If we find a binary from PipeA-D, lets load it.
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006204547.669464-1-anusha.srivatsa@intel.com
|
|
ADLP requires us to load both Pipe A and Pipe B.
Plug Pipe B loading support.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210621191415.29823-4-anusha.srivatsa@intel.com
|
|
This patch adds Pipe A plumbing to the already
existing parsing and loading functions which is
taken care of in the prep patches. Adding MAX_DMC_FW
to keep track for both Main and Pipe A DMC while loading
the respective blobs.
Also adding present field in dmc_info.
s/find_dmc_fw_offset/csr_set_dmc_fw_offset. While at it add
fw_info_matches_stepping() helper. CSR_PROGRAM() should now
take the starting address of the particular blob (Main or Pipe)
and not hardcode it.
v2: Add dmc_offset and start_mmioaddr fields for dmc_info struct.
v3: Add a missing corner cases of stepping-substepping combination in
fw_info_matches_stepping() helper.
v4: Add macro for start_mmioaddr for V1 package. Simplify code
in dmc_set_fw_offset (Lucas)
Cc: Souza, Jose <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210621191415.29823-3-anusha.srivatsa@intel.com
|
|
This is a prep patch for Pipe DMC plugging.
Add dmc_info struct in intel_dmc to have all common fields
shared between all DMC's in the package.
Add DMC_FW_MAIN(dmc_id 0) to refer to the blob.
v2: Remove dmc_offset and start_mmioaddr from dmc_info struct (Jose)
Cc: Souza, Jose <jose.souza@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210621191415.29823-2-anusha.srivatsa@intel.com
|
|
Move struct intel_dmc from i915_drv.h to intel_dmc.h.
v2: Add includes along with moving the struct.
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526220256.4097-4-anusha.srivatsa@intel.com
|
|
We check for dmc_payload being there at various points in the driver.
Replace it with the helper.
v2: rebased.
v3: Move intel_dmc to intel_dmc.h in another patch (Lucas)
v4: Remove headers not needed from intel_dmc.h
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526220256.4097-3-anusha.srivatsa@intel.com
|
|
Finally, rename the header and source file from csr to dmc.
v2: Add file rename in Documentation.
- Place headers in orders. (Jani)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210518213444.11420-6-anusha.srivatsa@intel.com
|
