summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/display/intel_ddi.c
AgeCommit message (Collapse)Author
2025-06-26drm/i915/display: Implement wa_16011342517Nemesa Garg
While doing voltage swing for type-c phy for DP 1.62 and HDMI write the LOADGEN_SHARING_PMD_DISABLE bit to 1. -v2: Update commit. Add bspec[Suraj] -v3: Move w/a before DKL_TX_PMD_LANE_SUS. Use DKL_TX_DPCNTL2[Ville] -v4: Use intel_encoder_is_dp and intel_encoder_is_hdmi. [Suraj] Bspec: 55359 Signed-off-by: Nemesa Garg <nemesa.garg@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://lore.kernel.org/r/20250625074911.194085-1-nemesa.garg@intel.com
2025-06-26drm/i915/panel: register drm_panel and call prepare/unprepare for eDPArun R Murthy
Allocate and register drm_panel to allow the panel_follower framework to detect the eDP panel and pass drm_connector::kdev device to drm_panel allocation for matching. Call drm_panel_prepare/unprepare in ddi_enable for eDP to allow the followers to get notified of the panel power state changes. Note: This is for eDP with DDI platforms only. v2: remove backlight setup from panel_register (Jani) v3: Updated the commit message (Jani) Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://lore.kernel.org/r/20250624-edp_panel-v3-1-e8197b6d9fde@intel.com
2025-06-09drm/i915: split out display register macros to a separate fileJani Nikula
This is a scripted split of the display related register macros from i915_reg.h to display/intel_display_regs.h. As a starting point, move all the macros that are only used in display code (or GVT). If there are users in core i915 code or soc/, or no users anywhere, keep the macros in i915_reg.h. This is done in groups of macros separated by blank lines, moving the comments along with the groups. Some manually picked macro groups are kept/moved regardless of the heuristics above. This is obviously a very crude approach. It's not perfect. But there are 4.2k lines in i915_reg.h, and its refactoring has ground to a halt. This is the big hammer that splits the file to two, and enables further cleanup. Cc: Suraj Kandpal <suraj.kandpal@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> # v2 Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20250606102256.2080073-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-05-29drm/i915/display: Add function to configure LFPS sendingJouni Högander
Add function to configre LFPS sending for Panel Replay according to link training sequence in HAS document. This assumes we are using AUX Less always if it's supported by the sink and the source. v2: - drop HAS reference - replay kerneldoc comment with a generic comment - check display version in intel_lnl_mac_transmit_lfps Bspec: 68849 Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Link: https://lore.kernel.org/r/20250526120512.1702815-11-jouni.hogander@intel.com
2025-05-29drm/i915/alpm: Move port alpm configurationJouni Högander
It is specified in Bspec where port alpm configuration is supposed to be performed. Change accordingly. v2: - drop HAS reference - ensure PORT_ALPM registers are not writen on older platform Bspec: 68849 Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Link: https://lore.kernel.org/r/20250526120512.1702815-9-jouni.hogander@intel.com
2025-05-21drm/i915/dp: Fix the enabling/disabling of audio SDP splittingImre Deak
Adjust the enabling/disabling steps of the DP audio SDP splitting according to a recent Bspec update. This moves the enabling to the audio codec enable sequence after the transcoder is enabled and disables SDP splitting explicitly during the audio disable sequence. Bspec requires waiting for a vblank event after the transcoder is enabled and before SDP splitting is enabled. There is no need for an explicit wait for this, since after the transcoder is enabled this vblank event is guaranteed to have happened via a flip done wait (see intel_atomic_commit_tail() -> drm_atomic_helper_wait_for_flip_done()). The bspec update is for LNL+ only, but the HW team clarified that this has been always the intended sequence on all platforms and bspec will be updated everywhere accordingly. The way SDP splitting was originally enabled matched the version of bspec at that time. Adding here the Fixes: line still, since this change fixes a FIFO underrun on PTL during output enabling when DSC is enabled. Bspec: 49283, 68943 Fixes: 8853750dbad8 ("drm/i915: Enable SDP split for DP2.0") Cc: Vinod Govindapillai <vinod.govindapillai@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://lore.kernel.org/r/20250520142219.1688401-1-imre.deak@intel.com
2025-05-20drm/i915/dpll: Rename intel_update_active_dpllSuraj Kandpal
Rename intel_update_active_dpll to intel_dpll_update_active in an effort to have function names which are exported to start with filenames they are exported from. Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Link: https://lore.kernel.org/r/20250515071801.2221120-15-suraj.kandpal@intel.com
2025-05-20drm/i915/dpll: Move away from using shared dpllSuraj Kandpal
Rename functions to move away from using shared dpll in the dpll framework as much as possible since dpll may not always be shared. --v2 -Use intel_dpll_global instead of global_dpll [Jani] --v3 -Just use intel_dpll [Jani] --v4 -Drop the global from comments [Jani] Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://lore.kernel.org/r/20250515071801.2221120-8-suraj.kandpal@intel.com
2025-05-20drm/i915/dpll: Rename intel_shared_dpllSuraj Kandpal
Rename intel_shared_dpll to intel_dpll to represent both shared and individual dplls. Since from MTL each PHY has it's own PLL making the shared PLL naming a little outdated. In an effort to make this framework accepting of future changes this needs to be done. --v2 -Use intel_dpll_global to make sure names start with the filename [Jani/Ville] -Explain the need of this rename [Jani] --v3 -Just keep it intel_dpll [Jani] --v4 -Fix comment [Jani] -Use just num_dpll and dplls [Jani] Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://lore.kernel.org/r/20250515071801.2221120-7-suraj.kandpal@intel.com
2025-04-24drm/i915/lobf: Disintegrate alpm_disable from psr_disableAnimesh Manna
Currently clearing of alpm registers is done through psr_disable() which is always not correct, without psr also alpm can exist. So dis-integrate alpm_disable() from psr_disable(). v1: Initial version. v2: - Remove h/w register read from alpm_disable(). [Jani] Signed-off-by: Animesh Manna <animesh.manna@intel.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Link: https://lore.kernel.org/r/20250423092334.2294483-5-animesh.manna@intel.com
2025-04-22drm/i915/display: drop lots of unnecessary #include i915_drv.hJani Nikula
With the PCH macros switched to use struct intel_display, we have a number of files that no longer need struct drm_i915_private or anything else from i915_drv.h anymore. Remove the #include, and add the missing includes that were previously implicit. v2: Drop even more of the includes Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Link: https://lore.kernel.org/r/5dc9e6a98461c344febac4c645875d8688eba906.1744880985.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-04-22drm/i915/display: pass struct intel_display to PCH macrosJani Nikula
Now that INTEL_PCH_TYPE() and HAS_PCH_*() macros are under display, and accept a struct intel_display pointer, use that instead of struct drm_i915_private pointer in display code. This is done naively by running: $ sed -i 's/\(INTEL_PCH_TYPE\|HAS_PCH_[A-Z0-9_-]*\)([^)]*)/\1(display)/g' \ $(find drivers/gpu/drm/i915/display -name "*.c") and fixing the fallout, i.e. removing unused local i915 variables and adding display variables where needed. v2: Rebase Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Link: https://lore.kernel.org/r/999f4d7b8ed11739b1c5ec8d6408fc39d5e3776b.1744880985.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-04-07drm/i915/dp_mst: Rename intel_dp_mst_encoder_active_links() to ↵Imre Deak
intel_dp_mst_active_streams() It's not clear which encoder intel_dp_mst_encoder_active_links() refers to (primary/stream), but there is also no reason to call the queried property an encoder property; remove encoder from the name. Also it's the number of MST streams being queried, vs. the number of MST links (there is one MST link carrying one or more MST streams), so rename link to stream as well. While at it pass intel_dp to the function, which is more logical and makes it easier to re-use the function later (without the need to get the digital port pointer). Also move the function earlier, next to the related ones. Suggested-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://lore.kernel.org/r/20250404150310.1156696-5-imre.deak@intel.com
2025-04-07drm/i915/dp: Rename intel_dp::link_trained to link.activeImre Deak
The intel_dp::link_trained flag indicates whether the link is active, regardless of whether the link training passed or failed. For clarity rename the flag to 'active'. While at it move the flag under intel_dp::link. Suggested-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://lore.kernel.org/r/20250404150310.1156696-2-imre.deak@intel.com
2025-03-28drm/i915/ddi: convert intel_ddi.c to struct intel_displayJani Nikula
Going forward, struct intel_display is the main display device data pointer. Convert as much as possible of intel_ddi.c to struct intel_display. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://lore.kernel.org/r/44aebcf93b2211e917b2ee725433b1f9b5e4e6f6.1742906146.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-03-25drm/i915/display: Use fixed_rr timings in modeset sequenceAnkit Nautiyal
During modeset enable sequence, program the fixed timings, and turn on the VRR Timing Generator (VRR TG) for platforms that always use VRR TG. For this intel_vrr_set_transcoder now always programs fixed timings. Later if vrr timings are required, vrr_enable() will switch to the real VRR timings. For platforms that will always use VRR TG, the VRR_CTL Enable bit is set and reset in the transcoder enable/disable path. v2: Update intel_vrr_set_transcoder_timings for fixed_rr. v3: Update intel_set_transcoder_timings_lrr for fixed_rr. (Ville) v4: Have separate functions to enable/disable VRR CTL v5: -For platforms that do not always have VRRTG on, do write bits other than enable bit and also use write the TRANS_VRR_PUSH register. (Ville) -Avoid writing trans_ctl_vrr if !vrr_possible(). v6: -Disable VRR just before intel_ddi_disable_transcoder_func(). (Ville) -Correct the sequence of configuring PUSH and VRR Enable/Disable. (Ville) v7: Reset trans_vrr_ctl to 0 unconditionally in intel_vrr_transcoder_disable(). (Ville) v8: Reset trans_vrr_ctl if flipline is not set. (Ville) Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://lore.kernel.org/r/20250324133248.4071909-9-ankit.k.nautiyal@intel.com
2025-03-07drm/i915: Program CURSOR_PROGRAM and COEFF_POLARITY for icl+ combo PHYsVille Syrjälä
Bspec asks us to clear the CURSOR_PROGRAM and COEFF_POLARITY bits in PORT_TX_DW5 on icl+ combo PHYs. Make it so. Bspec: 21257, 49291 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250303123952.5669-2-ville.syrjala@linux.intel.com Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
2025-03-05drm/i915/display: convert intel_has_pending_fb_unpin() to struct intel_displayJani Nikula
Going forward, struct intel_display is the main display device data pointer. The intel_display.[ch] files are too big to convert in one go. Convert intel_has_pending_fb_unpin() to struct intel_display. Reviewed-by: Nemesa Garg <nemesa.garg@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/d70ad8f9cbba5ee32d985b76047b56996ad4b31e.1741084010.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-03-05drm/i915/display: convert various port/phy helpers to struct intel_displayJani Nikula
Going forward, struct intel_display is the main display device data pointer. The intel_display.[ch] files are too big to convert in one go. Convert the various port/phy helpers to struct intel_display. Reviewed-by: Nemesa Garg <nemesa.garg@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/e28e53bad5014ba3ef17431557b517f1b8530963.1741084010.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-03-03drm/i915/hdcp: add hdcp sub-struct to struct intel_digital_portJani Nikula
Move hdcp_mutex, num_hdcp_streams, hdcp_auth_status, hdcp_port_data, and hdcp_mst_type1_capable members of struct intel_digital_port under an hdcp sub-struct to group hdcp related things together. Rename them mutex, num_streams, auth_status, port_data, and mst_type1_capable for clarity. Cc: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/9da4be57b068acd06dec8b93977f0a70627103d4.1740746939.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-02-28Merge drm/drm-next into drm-intel-nextJani Nikula
Sync to fix conlicts between drm-xe-next and drm-intel-next. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-02-27drm/i915/pfit: move ilk and i9xx pfit code to intel_pfit.[ch]Jani Nikula
Group panel fitter code in one place. Rename *_get_pfit_config() to *_pfit_get_config() while at it. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/d1f18b2c0d0ae07a3f38fc859b10a9de2b9c5c24.1740564009.git.jani.nikula@intel.com
2025-02-27drm/i915/ddi: convert intel_wait_ddi_buf_idle() to struct intel_displayJani Nikula
Convert the intel_ddi.[ch] interfaces to struct intel_display. Postpone further conversion to avoid conflicts. Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/2fe5c63f3a7f9861e3bd063b7355aafe32298f37.1740502116.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-02-27drm/i915/snps: convert intel_snps_phy.[ch] to struct intel_displayJani Nikula
Going forward, struct intel_display is the main display device data pointer. Convert the intel_snps_phy.[ch] to struct intel_display. Also convert the very much related intel_phy_is_snps() helper. Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/2dcc9313f5cf7777af3b6f20124526f6b9462b91.1740502116.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-02-27Merge tag 'drm-intel-next-2025-02-24' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next drm/i915 feature pull for v6.15: Features and functionality: - Enable DP 128b/132b SST DSC (Jani, Imre) - Allow DSB to perform commits when VRR is enabled (Ville) - Compute HDMI PLLs for SNPS/C10 PHYs for rates not in fixed tables (Ankit) - Allow DSB usage when PSR is enabled on LNL+ (Jouni) - Enable Panel Replay mode change without full modeset (Jouni) - Enable async flips with compressed buffers on ICL+ (Ville) - Support luminance based brightness control via DPCD for eDP (Suraj) - Enable VRR enable/disable without full modeset (Mitul, Ankit) - Add debugfs facility for force testing HDCP 1.4 (Suraj) - Add scaler tracepoints, improve plane tracepoints (Ville) - Improve DMC wakelock debugging facilities (Gustavo) - Allow GuC SLPC default strategies on MTL+ for performance (Rodrigo) - Provide more information on display faults (Ville) Refactoring and cleanups: - Continue conversions to struct intel_display (Ville, Jani, Suraj, Imre) - Joiner and Y plane reorganization (Ville) - Move HDCP debugfs to intel_hdcp.c (Jani) - Clean up and unify LSPCON interfaces (Jani) - Move code out of intel_display.c to reduce its size (Ville) - Clean up and simplify DDI port enabling/disabling (Imre) - Make LPT LP a dedicated PCH type, refactor (Jani) - Simplify DSC range BPG offset calculation (Ankit) - Scaler cleanups (Ville) - Remove unused code from GVT (David Alan Gilbert) - Improve plane debugging (Ville) - DSB and VRR refactoring (Ville) Fixes: - Check if vblank is sufficient for DSC prefill and scaler (Mitul) - Fix Mesa clear color alignment regression (Ville) - Add missing TC DP PHY lane stagger delay (Imre) - Fix DSB + VRR usage for PTL+ (Ville) - Improve robustness of display VT-d workarounds (Ville) - Fix platforms for dbuf tracker state service programming (Ravi) - Fix DMC wakelock support conditions (Gustavo) - Amend DMC wakelock register ranges (Gustavo) - Disable the Common Primary Timing Generator (CMTG) (Gustavo) - Enable C20 PHY SSC (Suraj) - Add workaround for DKL PHY DP mode write (Nemesa) - Fix build warnings on clamp() usage (Guenter Roeck, Ankit) - Fix error handling while adding a connector (Imre) - Avoid full modeset at probe on vblank delay mismatches (Ville) - Fix encoder HDMI check for HDCP line rekeying (Suraj) - Fix HDCP repeater authentication during topology change (Suraj) - Handle display PHY power state reset for power savings (Mika) - Fix typos all over the place (Nitin) - Update HDMI TMDS C20 parameters for various platforms (Dnyaneshwar) - Guarantee a minimum hblank time for 128b/132b and 8b/10b MST (Arun, Imre) - Do not hardcode LSPCON settle timeout (Giedrius Statkevičius) Xe driver changes: - Re-use display vmas when possible (Maarten) - Remove double pageflip (Maarten) - Enable DP tunneling (Imre) - Separate i915 and xe tracepoints (Ville) DRM core changes: - Increase DPCD eDP display control CAP size to 5 bytes (Suraj) - Add DPCD eDP version 1.5 definition (Suraj) - Add timeout parameter to drm_lspcon_set_mode() (Giedrius Statkevičius) Merges: - Backmerge drm-next (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87h64j7b7n.fsf@intel.com
2025-02-25drm/i915/dp_mst: Fix encoder HW state readout for UHBR MSTImre Deak
The encoder HW/SW state verification should use a SW state which stays unchanged while the encoder/output is active. The intel_dp::is_mst flag used during state computation to choose between the DP SST/MST modes can change while the output is active, if the sink gets disconnected or the MST topology is removed for another reason. A subsequent state verification using intel_dp::is_mst leads then to a mismatch if the output is disabled/re-enabled without recomputing its state. Use the encoder's active MST link count instead, which will be always non-zero for an active MST output and will be zero for SST. Fixes: 35d2e4b75649 ("drm/i915/ddi: start distinguishing 128b/132b SST and MST at state readout") Fixes: 40d489fac0e8 ("drm/i915/ddi: handle 128b/132b SST in intel_ddi_read_func_ctl()") Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250224093242.1859583-1-imre.deak@intel.com
2025-02-25Merge tag 'v6.14-rc4' into drm-nextDave Airlie
Backmerge Linux 6.14-rc4 at the request of tzimmermann so misc-next can base on rc4. Signed-off-by: Dave Airlie <airlied@redhat.com>
2025-02-19drm/i915/dp: Fix disabling the transcoder function in 128b/132b modeImre Deak
During disabling the transcoder in DP 128b/132b mode (both in case of an MST master transcoder and in case of SST) the transcoder function must be first disabled without changing any other field in the register (in particular leaving the DDI port and mode select fields unchanged) and clearing the DDI port and mode select fields separately, later during the disabling sequences. Fix the sequence accordingly. Bspec: 54128, 65448, 68849 Cc: Jani Nikula <jani.nikula@intel.com> Fixes: 79a6734cd56e ("drm/i915/ddi: disable trancoder port select for 128b/132b SST") Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250217223828.1166093-3-imre.deak@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 2ed653c7b843db0670136330480842d76cb65cd8) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-02-19drm/i915/dp: Fix disabling the transcoder function in 128b/132b modeImre Deak
During disabling the transcoder in DP 128b/132b mode (both in case of an MST master transcoder and in case of SST) the transcoder function must be first disabled without changing any other field in the register (in particular leaving the DDI port and mode select fields unchanged) and clearing the DDI port and mode select fields separately, later during the disabling sequences. Fix the sequence accordingly. Bspec: 54128, 65448, 68849 Cc: Jani Nikula <jani.nikula@intel.com> Fixes: 79a6734cd56e ("drm/i915/ddi: disable trancoder port select for 128b/132b SST") Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250217223828.1166093-3-imre.deak@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-02-17drm/i915/ddi: Fix HDMI port width programming in DDI_BUF_CTLImre Deak
Fix the port width programming in the DDI_BUF_CTL register on MTLP+, where this had an off-by-one error. Cc: <stable@vger.kernel.org> # v6.5+ Fixes: b66a8abaa48a ("drm/i915/display/mtl: Fill port width in DDI_BUF_/TRANS_DDI_FUNC_/PORT_BUF_CTL for HDMI") Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250214142001.552916-3-imre.deak@intel.com (cherry picked from commit b2ecdabe46d23db275f94cd7c46ca414a144818b) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-02-14drm/i915/ddi: Add a helper to enable a portImre Deak
Add a helper to enable a port instead of open-coding it. While at it rename intel_disable_ddi_buf() to intel_ddi_buf_disable() for consistency. v2: (Jani) - s/intel_enable_ddi_buf/intel_ddi_buf_enable - s/intel_disable_ddi_buf/intel_ddi_buf_disable Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250214142001.552916-11-imre.deak@intel.com
2025-02-14drm/i915/ddi: Unify the platform specific functions disabling a portImre Deak
The functions disabling a port for MTL+ and earlier platforms only differ by an extra step on MTL+ (to disable the D2D link) and the point at which the port's idle state is waited for. Combine the two functions accounting for the above differences, removing the duplication. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250214142001.552916-10-imre.deak@intel.com
2025-02-14drm/i915/ddi: Move platform checks within mtl_ddi_enable/disable_d2d_link()Imre Deak
The prefix of the mtl_ddi_enable_d2d() / mtl_ddi_disable_d2d_link() names show already what are the relevant platforms, so the corresponding platform check is a detail that can be hidden in the functions, do so. While at it rename mtl_ddi_disable_d2d_link() to mtl_ddi_disable_d2d() for symmetry with mtl_ddi_enable_d2d(). v2: s/mtl_ddi_disable_d2d_link/mtl_ddi_disable_d2d (Jani) Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250214142001.552916-9-imre.deak@intel.com
2025-02-14drm/i915/ddi: Simplify waiting for a port to get active/idle via DDI_BUF_CTLImre Deak
When waiting for a port to get active/idle there is no point in the complexity of specifying an exact timeout and for that the suitable wait API instead of just using the maximum timeout. The sequence in particular is not performance critical at all either and due to scheduling it's not guaranteed anyhow how long the wait will last at the given timescale. In the usual case where the wait succeeds the actual time waited does not change with the increased timeout. Simplify things accordingly, describing the bspec platform specific timeouts in code comments. v2: Clarify the rationale in the commit log. (Jani) Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250214142001.552916-8-imre.deak@intel.com
2025-02-14drm/i915/ddi: Simplify the port disabling via DDI_BUF_CTLImre Deak
A port can be disabled only via a modeset (or during HW state sanitization) when the port is enabled. Thus it's not required to check the port's enabled state before disabling it. In any case if the port happened to be disabled, the following disabling would be just a nop and waiting for the buffer's idle state should succeed. Simplify the disabling sequence accordingly. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250214142001.552916-7-imre.deak@intel.com
2025-02-14drm/i915/ddi: Simplify the port enabling via DDI_BUF_CTLImre Deak
In the past intel_digital_port::dp.prepare_link_retrain() could be called directly (vs. from a modeset) to retrain an enabled link. In that case the port had to be first disabled and then re-enabled. That changed with commit 2885d283cce5 ("drm/i915/dp: Retrain SST links via a modeset commit"), after which the only way prepare_link_retrain() can be called is from a modeset during link training when the port is still disabled. Simplify things accordingly, assuming the disabled port state. v2: Don't use drm_i915_private in intel_ddi_prepare_link_retrain(). (Jani) Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250214142001.552916-6-imre.deak@intel.com
2025-02-14drm/i915/ddi: Set missing TC DP PHY lane stagger delay in DDI_BUF_CTLImre Deak
Add the missing PHY lane stagger delay programming for ICL-ADL platforms on TypeC DP outputs. v2: (Jani) - Clarify code comment about lane stagger programming. - Robustify macro calls with parens. Bspec: 7534, 49533 Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250214142001.552916-5-imre.deak@intel.com
2025-02-14drm/i915/ddi: Make all the PORT_WIDTH macros work the same wayImre Deak
Make the PORT_WIDTH macro of the XELPDP_PORT_CTL1 register work the same way as those used for the DDI_BUF_CTL and the TRANS_DDI_FUNC_CTL registers: accept a width parameter and convert it to the given register's encoding. v2: Robustify macro calls with parens. (Jani) Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250214142001.552916-4-imre.deak@intel.com
2025-02-14drm/i915/ddi: Fix HDMI port width programming in DDI_BUF_CTLImre Deak
Fix the port width programming in the DDI_BUF_CTL register on MTLP+, where this had an off-by-one error. Cc: <stable@vger.kernel.org> # v6.5+ Fixes: b66a8abaa48a ("drm/i915/display/mtl: Fill port width in DDI_BUF_/TRANS_DDI_FUNC_/PORT_BUF_CTL for HDMI") Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250214142001.552916-3-imre.deak@intel.com
2025-02-13drm/i915/combo-phy: convert intel_combo_phy.[ch] to struct intel_displayJani Nikula
Going forward, struct intel_display is the main display device data pointer. Convert as much as possible of intel_combo_phy.[ch] to struct intel_display, along with intel_phy_is_combo() in intel_display.c. Drive-by convert some drm_dbg() to drm_dbg_kms() while at it. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/c2e0a6294a8eaa4c16632881edc4f2d23c576101.1739378096.git.jani.nikula@intel.com
2025-02-13drm/i915/display: convert intel_set_{cpu,pch}_fifo_underrun_reporting() to ↵Jani Nikula
intel_display Going forward, struct intel_display is the main display device data pointer. Convert intel_set_cpu_fifo_underrun_reporting() and intel_set_pch_fifo_underrun_reporting() to struct intel_display, along with some of the call chains from there. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3b984d0183214d05d0cdecad35184ea8d89ae050.1739378095.git.jani.nikula@intel.com
2025-02-13drm/i915/hpd: drop dev_priv parameter from intel_hpd_pin_default()Jani Nikula
The function doesn't use the parameter for anything. Drop it. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/4347a0f71a1a8c515617cf06471486d9bbb4a026.1739378095.git.jani.nikula@intel.com
2025-02-13drm/i915/display: convert assert_port_valid() to struct intel_displayJani Nikula
Going forward, struct intel_display is the main display device data pointer. Convert the assert_port_valid() helper to struct intel_display, allowing further conversions elsewhere. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/e06ef0e2cc34d42918f3208362587a17ea34e28f.1739378095.git.jani.nikula@intel.com
2025-02-12drm/i915/dpll: Use intel_display possible in shared_dpll_mgr hooksSuraj Kandpal
We use intel_display for function hooks of shared_dpll_mgr and any function that gets called when we use for_each_shared_dpll. This also contains some opportunistic display->platform.xx changes all to reductate the use of drm_i915_private. --v2 -rebase --v3 -Don't use inline to_i915 [Jani] Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250212074542.3569452-5-suraj.kandpal@intel.com
2025-02-11drm/i915: Continue intel_display_power struct intel_display conversionVille Syrjälä
Convert the remaining intel_display_power.h interfaces to take struct intel_display instead of struct drm_i915_private. intel_display_power.c still has some internal uses due to i915->runtime_pm. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250211000135.6096-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2025-02-10drm/i915: Convert intel_display_power_{get,put}*() to intel_displayVille Syrjälä
Pass intel_display to the display power stuff. These are spread all over the place so tend to hinder clean conversions of whole files. TODO: The gt part/unpark power domain shenanigans need some kind of more abstract interface... v2: Deal with cmtg Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250206185533.32306-7-ville.syrjala@linux.intel.com
2025-02-06Merge drm/drm-next into drm-misc-nextMaxime Ripard
Bring rc1 to start the new release dev. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-02-05drm/i915/lspcon: add intel_lspcon_active() and use itJani Nikula
Hide the direct lspcon->active use behind intel_lspcon_active(). Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3eabe0cb07a84c63119ea893e149de410b4356b0.1738677489.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-02-04drm/i915/lttpr: Enable Extended Wake TimeoutSuraj Kandpal
Usually retimers take around 30 to 40ms to exit all devices from sleep state. Extended wake timeout mechanism helps to give that additional time. --v2 -Grant the requested time only if greater than 1ms [Arun/Jani] -Reframe commit message [Arun] --v3 -Move the function to drm_core [Dmitry/Jani] Spec: DP v2.1 Section 3.6.12.3 Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250122053358.1545039-4-suraj.kandpal@intel.com
2025-01-24drm/i915/display: Add WA_14018221282Nemesa Garg
It was observed that the first write to DKL PHY DP Mode register was not taking effect, hence rewrite this register. v2: Rename function [Mitul] v3: Rename function [Jani] v4: Add check for display ver 13 [Matt] Co-developed-by: Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by: Nemesa Garg <nemesa.garg@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241226060632.213790-1-nemesa.garg@intel.com
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 13:47:35 +0000