summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/display/intel_cx0_phy.c
AgeCommit message (Collapse)Author
2025-06-18drm/i915/wcl: C10 phy connected to port A and BDnyaneshwar Bhadane
WCL added a c10 phy connected to port B. PTL code is currently restricting c10 to phy_a only. PTL doesn't have a PHY connected to PORT B; as such,there will never be a case where PTL uses PHY B. WCL uses PORT A and B with the C10 PHY.Reusing the condition for WCL and extending it for PORT B should not cause any issues for PTL. -v2: Reuse and extend PTL condition for WCL (Matt) Bspec: 73944 Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://lore.kernel.org/r/20250613193146.3549862-9-dnyaneshwar.bhadane@intel.com
2025-06-11drm/i915/display: drop i915_reg.h include where possibleJani Nikula
A number of files have unnecessary i915_reg.h includes. Drop them. Reviewed-by: Michał Grzelak <michal.grzelak@intel.com> Link: https://lore.kernel.org/r/7c4002322f4d8132fd2eaa1a4d688539cdd043c3.1749469962.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-05-29drm/i915/display: Add function to configure LFPS sendingJouni Högander
Add function to configre LFPS sending for Panel Replay according to link training sequence in HAS document. This assumes we are using AUX Less always if it's supported by the sink and the source. v2: - drop HAS reference - replay kerneldoc comment with a generic comment - check display version in intel_lnl_mac_transmit_lfps Bspec: 68849 Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Link: https://lore.kernel.org/r/20250526120512.1702815-11-jouni.hogander@intel.com
2025-05-29drm/i915/alpm: Move port alpm configurationJouni Högander
It is specified in Bspec where port alpm configuration is supposed to be performed. Change accordingly. v2: - drop HAS reference - ensure PORT_ALPM registers are not writen on older platform Bspec: 68849 Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Link: https://lore.kernel.org/r/20250526120512.1702815-9-jouni.hogander@intel.com
2025-05-14drm/i915/ptl: Use everywhere the correct DDI port clock select maskImre Deak
The PTL XELPDP_PORT_CLOCK_CTL register XELPDP_DDI_CLOCK_SELECT field's size is 5 bits vs. the earlier platforms where its size is 4 bits. Make sure the field is read-out/programmed everywhere correctly, according to the above. Cc: Mika Kahola <mika.kahola@intel.com> Cc: stable@vger.kernel.org # v6.13+ Tested-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://lore.kernel.org/r/20250512142600.824347-1-imre.deak@intel.com
2025-04-22drm/i915/display: drop lots of unnecessary #include i915_drv.hJani Nikula
With the PCH macros switched to use struct intel_display, we have a number of files that no longer need struct drm_i915_private or anything else from i915_drv.h anymore. Remove the #include, and add the missing includes that were previously implicit. v2: Drop even more of the includes Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Link: https://lore.kernel.org/r/5dc9e6a98461c344febac4c645875d8688eba906.1744880985.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-02-19drm/i915/display: Allow display PHYs to reset power stateMika Kahola
The dedicated display PHYs reset to a power state that blocks S0ix, increasing idle system power. After a system reset (cold boot, S3/4/5, warm reset) if a dedicated PHY is not being brought up shortly, use these steps to move the PHY to the lowest power state to save power. 1. Follow the PLL Enable Sequence, using any valid frequency such as DP 1.62 GHz. This brings lanes out of reset and enables the PLL to allow powerdown to be moved to the Disable state. 2. Follow PLL Disable Sequence. This moves powerdown to the Disable state and disables the PLL. v2: Rename WA function to more descriptive (Jani) For PTL, only port A needs this wa Add helpers to check presence of C10 phy and pll enabling (Imre) v3: Rename wa function (Imre) Check return value of C10 pll tables readout (Imre) Use PLL request to check pll enabling (Imre) v4: Move intel_cx0_pll_is_enabled() right after intel_cx0_pll_disable() (Imre) Add drm_WARN_ON() if C10 state cannot be calculated from the tables (Imre) v5: Add debug message on PLL enabling (Imre) Add check for intel_encoder_is_dig_port() (Imre) Signed-off-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250218100019.740556-3-mika.kahola@intel.com
2025-02-19drm/i915/display: Drop crtc_state from C10/C20 pll programmingMika Kahola
For PLL programming for C10 and C20 we don't need to carry crtc_state but instead use only necessary parts of the crtc_state i.e. pll_state. This change is needed to PTL wa 14023648281 where we would need to otherwise pass an artificial crtc_state with majority of the struct members initialized as NULL. v2: Use err instead of val for error handling (Imre) Unify parameter order (Imre) v3: Fix misplaced port_clock, and is_dp in intel_c20_pll_program() call (Imre) Signed-off-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250218100019.740556-2-mika.kahola@intel.com
2025-02-10drm/i915: Convert intel_display_power_{get,put}*() to intel_displayVille Syrjälä
Pass intel_display to the display power stuff. These are spread all over the place so tend to hinder clean conversions of whole files. TODO: The gt part/unpark power domain shenanigans need some kind of more abstract interface... v2: Deal with cmtg Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250206185533.32306-7-ville.syrjala@linux.intel.com
2025-02-05drm/i915/cx0: convert to struct intel_display based platform checksJani Nikula
Switch the IS_<PLATFORM>() checks to display->platform.<platform>, and drop a number of struct drm_i915_private pointers in the process. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250204134228.2934744-3-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-02-05Merge drm/drm-next into drm-intel-nextJani Nikula
Sync with v6.14-rc1. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-01-24drm/i915/cx0: Set ssc_enabled for c20 tooSuraj Kandpal
ssc_enabled does not get set for c20 phy. We makes sure we set ssc_enabled for both c10 and c20. Bspec: 74491 Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250122053022.1544881-1-suraj.kandpal@intel.com Link: https://patchwork.freedesktop.org/patch/msgid/20250122053022.1544881-1-suraj.kandpal@intel.com
2025-01-23drm/i915/cx0_phy: Use HDMI PLL algorithm for C10 PHYAnkit Nautiyal
Try HDMI PLL alogorithm for C10 PHY, if there are no pre-computed tables. Also get rid of the helpers to get rate for HDMI for C10/20 PHY, as we no longer depend only on pre-computed tables. Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250120042122.1029481-6-ankit.k.nautiyal@intel.com
2025-01-16drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm valueDnyaneshwar Bhadane
In the C20 algorithm for HDMI TMDS, certain fields have been updated in the BSpec to set values for SRAM_GENERIC_<A/B>_TX_CNTX_CFG_1, such as tx_misc and dac_ctrl_range for Xe2LPD, Xe2HPD and MTL/ARL. This patch covers fields that need to be set based on the platform type. Some ARLs SoCs cannot be directly distinguished by their GMD version Id, Specifically to set value of tx_misc, so PCI Host Bridge IDs are used for differentiation. v2: - Relocate defines and Restructure the code(Jani) v3: - Replace conditions with display.platform.<platform> (jani) - Move host bridge check to new function (Jani) v4: - Identify/Replace arrowlake_u as meteorlake_u(Jani) Bspec:74165,74491 Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241217201301.3593054-3-dnyaneshwar.bhadane@intel.com
2025-01-10Merge tag 'drm-intel-next-2025-01-07' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next Driver Changes: - Some DG2 refactor to fix DG2 bugs when operating with certain CPUs (Raag) - Use hw support for min/interim ddb allocation for async flip (Vinod) - More general code refactor to allow full display separation (Jani) - Expose dsc sink max slice count via debugfs (Swati) - Fix C10 pll programming sequence (Suraj) - Fix DG1 power gate sequence (Rodrigo) - Use preemption timeout on selftest cleanup (Janusz) - DP DSC related fixes (Ankit) - Fix HDCP compliance test (Suraj) - Clean and Optimise mtl_ddi_prepare_link_retrain (Suraj) - Adjust Added Wake Time with PKG_C_LATENCY (Animesh) - Enabling uncompressed 128b/132b UHBR SST (Jani) - Handle hdmi connector init failures, and no HDMI/DP cases (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Z31_WPbBoHkwgEA9@intel.com
2025-01-09Merge tag 'drm-xe-next-2025-01-07' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next UAPI Changes: - OA new property: 'unblock after N reports' (Ashutosh) i915 display Changes: - UHBR rates for Thunderbolt (Kahola) Driver Changes: - IRQ related fixes and improvements (Ilia) - Revert some changes that break a mesa debug tool (John) - Fix migration issues (Nirmoy) - Enable GuC's WA_DUAL_QUEUE for newer platforms (Daniele) - Move shrink test out of xe_bo (Nirmoy) - SRIOV PF: Use correct function to check LMEM provisioning (Michal) - Fix a false-positive "Missing outer runtime PM protection" warning (Rodrigo) - Make GSCCS disabling message less alarming (Daniele) - Fix DG1 power gate sequence (Rodrigo) - Xe files fixes (Lucas) - Fix a potential TP_printk UAF (Thomas) - OA Fixes (Umesh) - Fix tlb invalidation when wedging (Lucas) - Documentation fix (Lucas) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Z31579j3V3XCPFaK@intel.com
2024-12-19drm/i915/display: UHBR rates for ThunderboltMika Kahola
tbt-alt mode is missing uhbr rates 10G and 20G. This requires requires pll clock rates 312.5 MHz and 625 MHz to be added, respectively. The uhbr rates are supported only form PTL+ platforms. v2: Add drm_WARN_ON() to check if port clock is not supported by the platform (Imre) Combine forward ungate with mask parameter (Imre) Rename XE3LPDP_* to XE3D_* (Imre) Signed-off-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241217143440.572308-1-mika.kahola@intel.com
2024-12-18drm/i915/cx0_phy: Fix C10 pll programming sequenceSuraj Kandpal
According to spec VDR_CUSTOM_WIDTH register gets programmed after pll specific VDR registers and TX Lane programming registers are done. Moreover we only program into C10_VDR_CONTROL1 to update config and setup master lane once all VDR registers are written into. Bspec: 67636 Fixes: 51390cc0e00a ("drm/i915/mtl: Add Support for C10 PHY message bus and pll programming") Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241216181554.2861381-1-suraj.kandpal@intel.com
2024-12-16drm/i915/uncore: add to_intel_uncore() and use itJani Nikula
Add to_intel_uncore() function to avoid the inclusion of i915_drv.h from intel_de.h. This reveals a number of implicit dependencies on i915_drv.h that need to be added. For now, to_intel_uncore() can be an inline function, with all the includes in compat intel_uncore.h, as long as i915_drv.h isn't included. The implicit dependencies on i915_drv.h is a problem in display code, but the same is not true for xe_device.h etc. Reviewed-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/377e2b400d126776224fc49874ed9cb03ac3123c.1732104170.git.jani.nikula@intel.com
2024-12-02drm/i915/display: replace dig_port->saved_port_bits with flagsJani Nikula
dig_port->saved_port_bits is used to permanently store two DDI_BUF_CTL bits, DDI_BUF_PORT_REVERSAL and DDI_A_4_LANES. Store them separately as bools to make their use more logical and less about storing state as register bits. Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241129102503.452272-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-10-30drm/i915/display: use x100 version for full version and releaseJani Nikula
Use x100, or ver * 100 + rel, versions for full IP version checks, similar to what xe driver does: - Replace IP_VER(14, 1) inline with 1401, etc. - Convert DISPLAY_VER_FULL() to DISPLAY_VERx100() - Convert IS_DISPLAY_VER_FULL() to IS_DISPLAY_VERx100() - Convert IS_DISPLAY_VER_STEP() to IS_DISPLAY_VERx100_STEP() This makes ver.rel versions easier to use, follows the xe driver pattern, and drops the dependency on the IP_VER() macro. v2: Rebase, drop IP_VER() from xe compat headers v3: Rebase Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241029155536.753413-1-jani.nikula@intel.com
2024-10-30drm/i915/cx0: convert to struct intel_displayJani Nikula
struct intel_display will replace struct drm_i915_private as the main device pointer for display code. Switch Cx0 PHY code over to it. v2: Rebase, split out the include cleanups (Rodrigo) v3: Rebase Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241029160822.800097-1-jani.nikula@intel.com
2024-10-29drm/i915/cx0: Remove bus reset after every c10 transactionClint Taylor
C10 phy timeouts occur on xe3lpd if the c10 bus is reset every transaction. Although not required by BSPEC bus resets were added for prior platforms as a workaround. Starting with xe3_lpd this bus reset is not necessary. Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241028193015.3241858-6-clinton.a.taylor@intel.com
2024-10-29drm/i915/cx0: Extend C10 check to PTLDnyaneshwar Bhadane
When deciding the type of the phy, add PTL support to make sure the correct path is taken for selection of C10 PHY. Only port A is connected C10 PHY for Pantherlake. Bspec: 72571 Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com> Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com> Signed-off-by: Clint Taylor <Clinton.A.Taylor@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241028193015.3241858-5-clinton.a.taylor@intel.com
2024-10-29drm/i915/xe3lpd: Add check to see if edp over type c is allowedSuraj Kandpal
Read PICA register to see if edp over type C is possible and then add the appropriate tables for it. --v2 -remove bool from intel_encoder have it in runtime_info [Jani] -initialize the bool in runtime_info init [Jani] -dont abbreviate the bool [Jani] --v3 -Remove useless display version check [Jani] -change the warn on condition [Jani] -no need for a different function for edp type c check [Jani] -dont add register in i915_reg [Jani] Bspec: 68846 Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com> Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241028193015.3241858-3-clinton.a.taylor@intel.com
2024-10-29drm/i915/display: convert I915_STATE_WARN() to struct intel_displayJani Nikula
Convert I915_STATE_WARN() to struct intel_display *, and rename to INTEL_DISPLAY_STATE_WARN(). Do some minor opportunistic struct drm_i915_private to struct intel_display conversions while at it. v2: crtc_state may be NULL in intel_connector_verify_state() Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241024162510.2410128-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-10-28drm/i915/xe2lpd: Update C20 algorithm to include tx_miscGustavo Sousa
There has been an update to the BSpec in which we need to set tx_misc=0x5 field for C20 TX Context programming for HDMI TMDS for Xe2_LPD and newer. That field is mapped to the bits 7:0 of SRAM_GENERIC_<A/B>_TX_CNTX_CFG_1, which in turn translates to tx[1] of our state struct. Update the algorithm to reflect this change. v2: - Fix Bspec reference (Sai Teja) - Use struct intel_display instead of drm_i915_private. (Jani) - Use the correct bit width for C20_PHY_TX_MISC_MASK. (Jani) Bspec: 74491 Cc: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com> #v1 Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241023153352.144146-3-gustavo.sousa@intel.com
2024-10-28drm/i915/cx0: Pass crtc_state to intel_c20_compute_hdmi_tmds_pll()Gustavo Sousa
The variable crtc_state already contains everything that intel_c20_compute_hdmi_tmds_pll() needs. Simplify the function's signature by passing that struct instead of separate variables. Suggested-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241023153352.144146-2-gustavo.sousa@intel.com
2024-10-23drm/i915/xe3lpd: Add condition for EDP to powerdown P2.PGSuraj Kandpal
Add condition for P2.PG power down value. v2: change subject line to better match patch condition Bspec: 74494 Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241018200311.67324-8-matthew.s.atwood@intel.com
2024-10-23drm/i915/xe3lpd: Add C20 Phy consolidated programming tableSuraj Kandpal
From DISPLAY_VER() >= 30 C20 PHY consolidated programming table of DP and eDP been merged and now use the same rates and values. eDP over TypeC has also been introduced. Moreover it allows more granular and higher rates. Add new table to represent this change. Bspec: 68961 Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com> Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241018200311.67324-5-matthew.s.atwood@intel.com
2024-10-23drm/i915/panel: Convert panel code to intel_displayVille Syrjälä
struct intel_display will replace struct drm_i915_private as the main thing for display code. Convert the panel code to use it (as much as possible at this stage). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241016143134.26903-8-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-10-09drm/i915/mtl: Update PLL c20 phy value for DP uhbr20Dnyaneshwar Bhadane
Update mtl c20 phy DP table for uhbr20 values according to the revised specifications. Bspec: 74165 Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com> Reviewed-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240827141356.3024760-1-dnyaneshwar.bhadane@intel.com
2024-06-28drm/i915/mtl: Skip PLL state verification in TBT modeImre Deak
In TBT-alt mode the driver doesn't program the PHY's PLL, which is handled instead by Thunderbolt driver/FW components, hence the PLL's HW vs. SW state verification should be skipped. During HW readout set a flag in the PLL state if the port was at the moment in TBT-alt mode and skip the verification of PLL parameters in this case. Fixes: 45fe957ae769 ("drm/i915/display: Add compare config for MTL+ platforms") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11258 Cc: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240626170813.806470-1-imre.deak@intel.com
2024-05-30drm/i915/display: Add compare config for MTL+ platformsMika Kahola
Currently, we may bump into pll mismatch errors during the state verification stage. This happens when we try to use fastset instead of full modeset. Hence, we would need to add a check for pipe configuration to ensure that the sw and the hw configuration will match. In case of hw and sw mismatch, we would need to disable fastset and use full modeset instead. v2: Fix C10 error on PLL comparison (BAT) Use memcmp instead of fixed loops for pll config comparison (Jani) Clean up and use intel_cx0pll_dump_hw_state() to dump pll information (Jani) Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240523134649.31452-3-mika.kahola@intel.com
2024-05-30drm/i915/display: Revert "drm/i915/display: Skip C10 state verification in ↵Mika Kahola
case of fastset" This reverts commit a1d91c6e989d0e66b89aa911f2cd459d7bdebbe5. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240523134649.31452-2-mika.kahola@intel.com
2024-05-03drm/i915/xe2hpd: update pll values in sync with BspecRavi Kumar Vodapalli
DP/eDP and HDMI pll values are updated for Xe2_HPD platform v2: Removed the unsupported mtl_c20_dp_uhbr20 from xehpd_c20_dp_tables Bspec: 74165 Signed-off-by: Ravi Kumar Vodapalli <ravi.kumar.vodapalli@intel.com> Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240430172850.1881525-9-radhakrishna.sripada@intel.com
2024-05-03drm/i915/xe2hpd: Add support for eDP PLL configurationBalasubramani Vivekanandan
Tables for eDP PHY PLL configuration for different link rates added for Xe2_HPD. Previous platforms were using C10 PHY for eDP port whereas Xe2_HPD has C20 PHY. v2: Updated with a more appropriate Bspec number. Bspec: 74165 CC: Clint Taylor <Clinton.A.Taylor@intel.com> Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240430172850.1881525-8-radhakrishna.sripada@intel.com
2024-05-03drm/i915/xe2hpd: Add new C20 PHY SRAM addressBalasubramani Vivekanandan
Xe2_HPD has different offsets for C20 PHY SRAM configuration context location. Use the display version to select the right address. Note that Xe2_LPD uses the same C20 SRAM offsets used by Xe_LPDP (i.e. MTL's display). According to the BSpec, currently, only Xe2_HPD has different offsets, so make sure it is the only display using them in the driver. v2: * Redesigned how the right offsets are selected for different display IP versions. v3: Fix white space error(RK) Bspec: 67610 Cc: Clint Taylor <Clinton.A.Taylor@intel.com> Cc: Gustavo Sousa <gustavo.sousa@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240430172850.1881525-7-radhakrishna.sripada@intel.com
2024-05-03drm/i915/xe2hpd: Properly disable power in port AJosé Roberto de Souza
Xe2_HPD has a different value to power down port A. BSpec: 65450 Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240430172850.1881525-6-radhakrishna.sripada@intel.com
2024-05-03drm/i915/bmg: Lane reversal requires writes to both context lanesClint Taylor
Write both CX0 Lanes for Context Toggle for all except TC pin assignment D. v2: Update title(RK) Bspec: 64539 CC: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240430172850.1881525-2-radhakrishna.sripada@intel.com
2024-05-03drm/i915/display: Calculate crtc clock rate based on PLL parametersMika Kahola
With HDMI monitors we bumped up a case where the crtc clock rate caused a mismatch on state verification. This was due to assumption that the SW clock rate from PLL structure would match the calculated counterpart from HW. This is not necessarily always the case and therefore we would actually need to recalculate the clock rate from SW PLL parameters. Then these SW and HW crtc clock rates can be compared with each other. The patch recalculates the crtc clock rate for SW state based on SW PLL parameters and compares the crtc clock rate calculated from the parameters found from the HW. Signed-off-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240502131716.504616-1-mika.kahola@intel.com
2024-04-17drm/i915: Suck snps/cx0 PLL states into dpll_hw_stateVille Syrjälä
For some reason the snps/cx0 PLL states were added into a union alongside dpll_hw_state. Just suck them into dpll_hw_state so that we don't have so many levels of unions/etc. TODO: Get rid of 'clock' from the snps/cx0 PLL states as it is not a register values and thus doesn't belong there Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240412182703.19916-19-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-03-26drm/i915/de: register wait function renamesJani Nikula
Do some renames on the register wait functions for clarity and brevity: intel_de_wait_for_register -> intel_de_wait intel_de_wait_for_register_fw -> intel_de_wait_fw __intel_de_wait_for_register -> intel_de_wait_custom In particular, it seemed odd to have a double-underscored function be called in a number of places. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240320160123.2904609-1-jani.nikula@intel.com
2024-03-21drm/i915/cx0: pass encoder instead of i915 and port aroundJani Nikula
The encoder is a much more useful thing to pass around than the i915 and port combo. Also drive-by clean up some cases where both i915 and encoder are passed; only the latter is needed. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f9308e47a3a66bd74479480964c8a538e3f6a358.1710949619.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-03-21drm/i915/cx0: remove the unused intel_is_c10phy()Jani Nikula
The intel_is_c10phy() is now unused. Remove. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/486ad2832c567ae491726c6c0cd7144e14469a2f.1710949619.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-03-21drm/i915/display: use intel_encoder_is/to_* functionsJani Nikula
Wherever possible, replace the port/phy based functions with the encoder based functions: intel_is_c10phy() -> intel_encoder_is_c10phy() intel_phy_is_combo() -> intel_encoder_is_combo() intel_phy_is_tc() -> intel_encoder_is_tc() intel_port_to_phy() -> intel_encoder_to_phy() intel_port_to_tc() -> intel_encoder_to_tc() Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ce8d116fcdd7662fa0a0817200a8e6fda313e496.1710949619.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-03-21drm/i915/display: add intel_encoder_is_*() and _to_*() functionsJani Nikula
Add a number of encoder based functions to check if the port/phy of the encoder is of a certain type, or to convert to phy or tc_port. Initially these are just wrappers around the existing functions, but they can be improved to use VBT data or use some cached info in the future. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7b2d350ee42883f2784030c649d16f983bd407bd.1710949619.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-02-14drm/i915/display: update pll values in sync with Bspec for MTLRavi Kumar Vodapalli
DP/eDP and HDMI C20 PHY PLL values were updated for MTL platform Signed-off-by: Ravi Kumar Vodapalli <ravi.kumar.vodapalli@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240214070930.1028456-1-ravi.kumar.vodapalli@intel.com
2024-01-30drm/i915/xe2lpd: Move registers to PICALucas De Marchi
Some registers for DDI A/B moved to PICA and now follow the same format as the ones for the PORT_TC ports. The wrapper here deals with 2 issues: - Share the implementation between xe2lpd and previous platforms: there are minor layout changes, it's mostly the register location that changed - Handle offsets after TC ports v2: - Explain better the trick to use just the second range (Matt Roper) - Add missing conversions after rebase (Matt Roper) - Use macro instead of inline function, avoiding includes in the header (Jani) - Prefix old macros with underscore so they don't get used by mistake, and name the new ones using the previous names v3: Use the same logic for the recently-introduced XELPDP_PORT_MSGBUS_TIMER (Gustavo) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240126224638.4132016-3-lucas.demarchi@intel.com
2024-01-08drm/i915/display: Use helper to select C20 MPLLA/BMika Kahola
We used to select between MPLLA/B with the following state->tx[0] & C20_PHY_USE_MPLLB Since this is used a few places within C20 PLL setting, let's introduce a helper function to clean up the code a bit. Signed-off-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240105112243.224199-1-mika.kahola@intel.com
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 06:14:42 +0000