summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/display/intel_connector.c
AgeCommit message (Collapse)Author
2025-06-26drm/i915/display: move unordered works to new private workqueueLuca Coelho
Create a new unordered workqueue to be used by the display code instead of relying on the i915 one. Then move all the unordered works used in the display code to use this new queue. Since this is an unordered workqueue, by definition there can't be any order dependency with non-display works, so no extra care is needed in regard to that. This is part of the effort to isolate the display code from i915. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://lore.kernel.org/r/20250620091632.1256135-1-luciano.coelho@intel.com Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2025-06-23Merge tag 'drm-intel-next-2025-06-18' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next drm/i915 feature pull for v6.17: Features and functionality: - Add support for DSC fractional link bpp on DP MST (Imre) - Add support for simultaneous Panel Replay and Adaptive Sync (Jouni) - Add support for PTL+ double buffered LUT registers (Chaitanya, Ville) - Add PIPEDMC event handling in preparation for flip queue (Ville) Refactoring and cleanups: - Rename lots of DPLL interfaces to unify them (Suraj) - Allocate struct intel_display dynamically (Jani) - Abstract VLV IOSF sideband better (Jani) - Use str_true_false() helper (Yumeng Fang) - Refactor DSB code in preparation for flip queue (Ville) - Use drm_modeset_lock_assert_held() instead of open coding (Luca) - Remove unused arg from skl_scaler_get_filter_select() (Luca) - Split out a separate display register header (Jani) - Abstract DRAM detection better (Jani) - Convert LPT/WPT SBI sideband to struct intel_display (Jani) Fixes: - Fix DSI HS command dispatch with forced pipeline flush (Gareth Yu) - Fix BMG and LNL+ DP adaptive sync SDP programming (Ankit) - Fix error path for xe display workqueue allocation (Haoxiang Li) - Disable DP AUX access probe where not required (Imre) - Fix DKL PHY access if the port is invalid (Luca) - Fix PSR2_SU_STATUS access on ADL+ (Jouni) - Add sanity checks for porch and sync on BXT/GLK DSI (Ville) DRM core changes: - Change AUX DPCD access probe address (Imre) - Refactor EDID quirks, amd make them available to drivers (Imre) - Add quirk for DPCD access probe (Imre) - Add DPCD definitions for Panel Replay capabilities (Jouni) Merges: - Backmerges to sync with v6.15-rcs and v6.16-rc1 (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://lore.kernel.org/r/fff9f231850ed410bd81b53de43eff0b98240d31@intel.com
2025-06-11drm/i915/panel: add panel register/unregisterJani Nikula
Add panel register/unregister functions, and handle backlight register/unregister from there. This is in preparation for adding more panel specific register/unregister functionality. Cc: Lee Shawn C <shawn.c.lee@intel.com> Tested-by: Lee Shawn C <shawn.c.lee@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@gmail.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/b737d4bc8b91df630cd4db4648f3a3571989cfd8.1749199013.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-06-05drm/i915: use drm_modeset_lock_assert_held() in intel_connector_get_pipe()Luca Coelho
In the intel_connector_get_pipe() function, we check if connection_mutex is held and generate our own WARN_ON if that's the case. Instead of generating a non-standard warning for a mutex issue, we should use the standard lockdep framework. Change the function to use drm_modeset_lock_assert_held() instead. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Link: https://lore.kernel.org/r/20250520095408.1310440-1-luciano.coelho@intel.com
2025-03-21drm/i915/connector: convert intel_connector.c to struct intel_displayJani Nikula
Going forward, struct intel_display is the main display device data pointer. Convert as much as possible of intel_connector.c to struct intel_display. i915_inject_probe_failure() remains the only call that requires i915 pointer. Reviewed-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://lore.kernel.org/r/398e3210459a65f74e78f2d34584cda6eea6a99b.1742481923.git.jani.nikula@intel.com
2025-03-03drm/i915/mst: add mst sub-struct to struct intel_connectorJani Nikula
Move port and mst_port members of struct intel_connector under an mst sub-struct to group mst related things together. Rename the latter dp for clarity. Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/e2afaf4595ae8e3241aaca1c1bb4d6356b07e44a.1740746939.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-02-15drm/i915: Extract intel_connector_cancel_modeset_retry_work()Ville Syrjälä
Hide the implementation details of the modeset retry work better. v2: Include prototype and sort includes correctly (Jani) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250213150220.13580-4-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2025-02-15drm/i915: Always initialize connector->modeset_retry_workVille Syrjälä
Since we have all the necessary bits in intel_connector.c might as well always initialize the modeset_retry_work for every connector. Avoids yet another init function you have to remember to call. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250213150220.13580-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2025-02-15drm/i915: Move modeset_retry stuff into intel_connector.cVille Syrjälä
Most of the modeset retry stuff looks to be entirely generic, and so there doesn't seem to any reason to keep it in intel_dp.c. Move the generic bits into intel_connector.c. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250213150220.13580-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-09-15drm/i915: Call the DDC bus i2c adapter "ddc"Ville Syrjälä
Rename the various names we've used for the DDC bus i2c adapter ("i2c", "adapter", etc.) to just "ddc". This differentiates it from the various other i2c busses we might have (DSI panel stuff, DVO control bus, etc.). v2: Don't add a bogus drm_get_edid() call (Jani) Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230831104300.29688-1-ville.syrjala@linux.intel.com
2023-06-15Merge tag 'amd-drm-next-6.5-2023-06-09' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.5-2023-06-02: amdgpu: - SR-IOV fixes - Warning fixes - Misc code cleanups and spelling fixes - DCN 3.2 updates - Improved DC FAMS support for better power management - Improved DC SubVP support for better power management - DCN 3.1.x fixes - Max IB size query - DC GPU reset fixes - RAS updates - DCN 3.0.x fixes - S/G display fixes - CP shadow buffer support - Implement connector force callback - Z8 power improvements - PSP 13.0.10 vbflash support - Mode2 reset fixes - Store MQDs in VRAM to improve queue switch latency - VCN 3.x fixes - JPEG 3.x fixes - Enable DC_FP on LoongArch - GFXOFF fixes - GC 9.4.3 partition support - SDMA 4.4.2 partition support - VCN/JPEG 4.0.3 partition support - VCN 4.0.3 updates - NBIO 7.9 updates - GC 9.4.3 updates - Take NUMA into account when allocating memory - Handle NUMA for partitions - SMU 13.0.6 updates - GC 9.4.3 RAS updates - Stop including unused swiotlb.h - SMU 13.0.7 fixes - Fix clock output ordering on some APUs - Clean up DC FPGA code - GFX9 preemption fixes - Misc irq fixes - S0ix fixes - Add new DRM_AMDGPU_WERROR config parameter to help with CI - PCIe fix for RDNA2 - kdoc fixes - Documentation updates amdkfd: - Query TTM mem limit rather than hardcoding it - GC 9.4.3 partition support - Handle NUMA for partitions radeon: - Fix possible double free - Stop including unused swiotlb.h - Fix possible division by zero ttm: - Add query for TTM mem limit - Add NUMA awareness to pools - Export ttm_pool_fini() UAPI: - Add new ctx query flag to better handle GPU resets Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22290 - Add new interface to query and set shadow buffer for RDNA3 Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21986 - Add new INFO query for max IB size Proposed userspace: https://gitlab.freedesktop.org/bnieuwenhuizen/mesa/-/commits/ib-rejection-v3 amd-drm-next-6.5-2023-06-09: amdgpu: - S0ix fixes - Initial SMU13 Overdrive support - kdoc fixes - Misc clode cleanups - Flexible array fixes - Display OTG fixes - SMU 13.0.6 updates - Revert some broken clock counter updates - Misc display fixes - GFX9 preemption fixes - Add support for newer EEPROM bad page table format - Add missing radeon secondary id - Add support for new colorspace KMS API - CSA fix - Stable pstate fixes for APUs - make vbl interface admin only - Handle PCI accelerator class amdkfd: - Add debugger support for gdb radeon: - Fix possible UAF drm: - Add Colorspace functionality UAPI: - Add debugger interface for enabling gdb Proposed userspace: https://github.com/ROCm-Developer-Tools/ROCdbgapi/tree/wip-dbgapi - Add KMS colorspace API Discussion: https://lists.freedesktop.org/archives/dri-devel/2023-June/408128.html From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230609174817.7764-1-alexander.deucher@amd.com
2023-06-09drm/connector: Allow drivers to pass list of supported colorspacesHarry Wentland
Drivers might not support all colorspaces defined in dp_colorspaces and hdmi_colorspaces. This results in undefined behavior when userspace is setting an unsupported colorspace. Allow drivers to pass the list of supported colorspaces when creating the colorspace property. v2: - Use 0 to indicate support for all colorspaces (Jani) - Print drm_dbg_kms message when drivers pass 0 to signal that drivers should specify supported colorspaecs explicity (Jani) v3: - Move changes to create a common colorspace_names array to separate patch v6: - Avoid magic when passing 0 for supported_colorspaces; be explicit in treating it as "all DP/HDMI" Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com> Reviewed-by: Joshua Ashton <joshua@froggi.es> Reviewed-by: Simon Ser <contact@emersion.fr> Cc: Pekka Paalanen <ppaalanen@gmail.com> Cc: Sebastian Wick <sebastian.wick@redhat.com> Cc: Vitaly.Prosyak@amd.com Cc: Uma Shankar <uma.shankar@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Joshua Ashton <joshua@froggi.es> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Simon Ser <contact@emersion.fr> Cc: Melissa Wen <mwen@igalia.com> Cc: dri-devel@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-02drm/i915/display: switch the rest of the connectors to struct drm_edidJani Nikula
Convert the remaining uses of struct edid based drm_get_edid(), drm_connector_update_edid_property() and drm_add_edid_modes() calls to the struct drm_edid based drm_edid_read_ddc(), drm_edid_connector_update() and drm_edid_connector_add_modes(). Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/b1b53bb9004adaa402e061f7df2caf0eb4723a43.1685437501.git.jani.nikula@intel.com
2023-01-26drm/i915/panel: move panel fixed EDID to struct intel_panelJani Nikula
It's a bit confusing to have two cached EDIDs in struct intel_connector with slightly different purposes. Make the distinction a bit clearer by moving the EDID cached for eDP and LVDS panels at connector init time to struct intel_panel, and name it fixed_edid. That's what it is, a fixed EDID for the panels. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/328350ef918638928a8286cdbab3107c8258332d.1674643465.git.jani.nikula@intel.com
2023-01-26drm/i915/edid: convert DP, HDMI and LVDS to drm_edidJani Nikula
Convert all the connectors that use cached connector edid and detect_edid to drm_edid. Since drm_get_edid() calls drm_connector_update_edid_property() while drm_edid_read*() do not, we need to call drm_edid_connector_update() separately, in part due to the EDID caching behaviour in HDMI and DP. Especially DP depends on the details parsed from EDID. (The big behavioural change conflating EDID reading with parsing and property update was done in commit 5186421cbfe2 ("drm: Introduce epoch counter to drm_connector")) v6: Rebase on drm_edid_connector_add_modes() v5: Fix potential uninitialized var use (kernel test robot <lkp@intel.com>) v4: Call drm_edid_connector_update() after reading HDMI/DP EDID v3: Don't leak vga switcheroo EDID in LVDS init (Ville) v2: Don't leak opregion fallback EDID (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/eabb4de932841b38b34cc2818ea9fbf7c10224fd.1674643465.git.jani.nikula@intel.com
2022-12-09drm/i915: Introduce intel_panel_init_alloc()Ville Syrjälä
Introduce a place where we can initialize connector->panel after it's been allocated. We already have a intel_panel_init() so had to get creative with the name and came up with intel_panel_init_alloc(). Cc: Animesh Manna <animesh.manna@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221125173156.31689-2-ville.syrjala@linux.intel.com
2022-09-26drm/i915: Extract intel_attach_scaling_mode_property()Ville Syrjälä
Consolidate the scaling_mode property setup into a single place. The one slight complicateion here is that GMCH platforms can't do the CENTER mode except on the LVDS port. But we can deal with that by just checking the connector type. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220912111814.17466-12-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-08-31drm/i915: move and group properties under display.propertiesJani Nikula
Move display property related members under drm_i915_private display sub-struct. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/14b14f871e322419b10166c1bd8a5a956f5430c8.1661779055.git.jani.nikula@intel.com
2022-03-29drm/i915: Pass intel_connector to intel_panel_{init,fini}()Ville Syrjälä
All the other intel_panel functions take struct intel_connector, so might as well make init()/fini() take one as well. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220323182935.4701-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-03-15drm/i915: Convert fixed_mode/downclock_mode into a listVille Syrjälä
Store the fixed_mode and downclock_mode as a real list, in preparation for exposing other supported modes as well. v2: Init the list in intel_sdvo_connector_alloc() too v3: Use list_first_entry_or_null() (Jani) Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220314152737.9125-1-ville.syrjala@linux.intel.com
2021-10-01drm/i915/debugfs: pass intel_connector to intel_connector_debugfs_add()Jani Nikula
Prefer the intel_ types. No functional changes. v2: Fix build. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210830140222.12228-1-jani.nikula@intel.com
2021-08-26drm/i915/backlight: extract backlight code to a separate fileJani Nikula
In a long overdue refactoring, split out backlight code to new intel_backlight.[ch]. Simple code movement, leave renames for follow-up work. No functional changes. Cc: Lyude Paul <lyude@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/97d310848f03061473b9b2328e2c5c4dcf263cfa.1629888677.git.jani.nikula@intel.com
2021-05-07drm/connector: Add a helper to attach the colorspace propertyMaxime Ripard
The intel driver uses the same logic to attach the Colorspace property in multiple places and we'll need it in vc4 too. Let's move that common code in a helper. Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210430094451.2145002-4-maxime@cerno.tech
2020-12-02drm/i915: Split intel_attach_colorspace_property() into HDMI vs. DP variantsVille Syrjälä
With LSPCON we use the AVI infoframe to convey the colorimetry information (as opposed to DP MSA/SDP), so the property we expose should match the values we can stuff into the infoframe. Ie. we must use the HDMI variant of the property, even though we drive LSPCON in PCON mode. To that end just split intel_attach_colorspace_property() into HDMI and DP variants and let the caller worry about which one it wants to use. Cc: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-8-uma.shankar@intel.com
2020-04-17drm/i915: Add connector dbgfs for all connectorsAnshuman Gupta
Add connector debugfs attributes for each intel connector which is getting register. v2: - adding connector debugfs for each connector in intel_connector_register() to fix CI failure for legacy connectors. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200415170555.15531-4-anshuman.gupta@intel.com
2020-03-25drm/i915/connector: use MISSING_CASE instead of loggingJani Nikula
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/bb70a05a2c20307ab67b89c4682f5afc5953fcaf.1584714939.git.jani.nikula@intel.com
2020-02-04drm/i915/display: Make WARN* drm specific where drm_device ptr is availablePankaj Bharadiya
drm specific WARN* calls include device information in the backtrace, so we know what device the warnings originate from. Covert all the calls of WARN* with device specific drm_WARN* variants in functions where drm_device or drm_i915_private struct pointer is readily available. The conversion was done automatically with below coccinelle semantic patch. checkpatch errors/warnings are fixed manually. @rule1@ identifier func, T; @@ func(...) { ... struct drm_device *T = ...; <... ( -WARN( +drm_WARN(T, ...) | -WARN_ON( +drm_WARN_ON(T, ...) | -WARN_ONCE( +drm_WARN_ONCE(T, ...) | -WARN_ON_ONCE( +drm_WARN_ON_ONCE(T, ...) ) ...> } @rule2@ identifier func, T; @@ func(struct drm_device *T,...) { <... ( -WARN( +drm_WARN(T, ...) | -WARN_ON( +drm_WARN_ON(T, ...) | -WARN_ONCE( +drm_WARN_ONCE(T, ...) | -WARN_ON_ONCE( +drm_WARN_ON_ONCE(T, ...) ) ...> } @rule3@ identifier func, T; @@ func(...) { ... struct drm_i915_private *T = ...; <+... ( -WARN( +drm_WARN(&T->drm, ...) | -WARN_ON( +drm_WARN_ON(&T->drm, ...) | -WARN_ONCE( +drm_WARN_ONCE(&T->drm, ...) | -WARN_ON_ONCE( +drm_WARN_ON_ONCE(&T->drm, ...) ) ...+> } @rule4@ identifier func, T; @@ func(struct drm_i915_private *T,...) { <+... ( -WARN( +drm_WARN(&T->drm, ...) | -WARN_ON( +drm_WARN_ON(&T->drm, ...) | -WARN_ONCE( +drm_WARN_ONCE(&T->drm, ...) | -WARN_ON_ONCE( +drm_WARN_ON_ONCE(&T->drm, ...) ) ...+> } Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200128181603.27767-20-pankaj.laxminarayan.bharadiya@intel.com
2020-01-21drm/i915: Use intel_attached_encoder()Ville Syrjälä
It's easy to confuse the drm_connector->encoder (legacy state adjusted during modeset) and intel_connector->encoder (the statically (sans. MST) attached encoder of the connector). For the latter let's use intel_attached_encoder() consistently. @@ identifier F !~ "^intel_attached_encoder$"; struct intel_connector *C; expression E; @@ F(...) { <... ( C->encoder = E | - C->encoder + intel_attached_encoder(C) ) ...> } @@ identifier F !~ "^intel_attached_encoder$"; struct drm_connector *C; expression E; @@ F(...) { <... ( to_intel_connector(C)->encoder = E | - to_intel_connector(C)->encoder + intel_attached_encoder(to_intel_connector(C)) ) ...> } v2: Regenerated Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191204180549.1267-6-ville.syrjala@linux.intel.com Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
2019-10-15drm/i915/dp: Attach colorspace propertyGwan-gyeong Mun
It attaches the colorspace connector property to a DisplayPort connector. Based on colorspace change, modeset will be triggered to switch to a new colorspace. And in order to distinguish colorspace bwtween DP and HDMI connector, it adds a handling of drm_mode_create_dp_colorspace_property() to intel_attach_colorspace_property(). Based on colorspace property value create a VSC SDP packet with appropriate colorspace. This would help to enable wider color gamut like BT2020 on a sink device. v9: Addressed review comments from Ville - Add a handling of drm_mode_create_dp_colorspace_property() to intel_attach_colorspace_property(). This hunk moved from the previous commit. Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190919195311.13972-6-gwan-gyeong.mun@intel.com
2019-10-03Merge drm/drm-next into drm-misc-nextMaxime Ripard
We haven't done any backmerge for a while due to the merge window, and it starts to become an issue for komeda. Let's bring 5.4-rc1 in. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-09-20drm: Rename HDMI colorspace property creation functionGwan-gyeong Mun
As between HDMI and DP have different colorspaces, in order to distinguish colorspace of DP and HDMI, it renames drm_mode_create_colorspace_property() function to drm_mode_create_hdmi_colorspace_property() function for HDMI connector. In order to apply changed drm api, i915 driver has channged. It addresses review comments from Ville. - Split hunk into renaming and adding of code. Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190919195311.13972-4-gwan-gyeong.mun@intel.com
2019-08-07drm/i915: rename intel_drv.h to display/intel_display_types.hJani Nikula
Everything about the file is about display, and mostly about types related to display. Move under display/ as intel_display_types.h to reflect the facts. There's still plenty to clean up, but start off with moving the file where it logically belongs and naming according to contents. v2: fix the include guard name in the renamed file Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190806113933.11799-1-jani.nikula@intel.com
2019-08-02drm/i915: Add i915 to i915_inject_probe_failureMichal Wajdeczko
With i915 added to i915_inject_probe_failure we can use dedicated printk when injecting artificial load failure. Also make this function look like other i915 functions that return error code and make it more flexible to return any provided error code instead of previously assumed -ENODEV. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190802184055.31988-2-michal.wajdeczko@intel.com
2019-07-12drm/i915: Replace "_load" with "_probe" consequentlyJanusz Krzysztofik
Use the "_probe" nomenclature not only in i915_driver_probe() helper name but also in other related function / variable names for consistency. Only the userspace exposed name of a related module parameter is left untouched. Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190712112429.740-4-janusz.krzysztofik@linux.intel.com
2019-06-17drm/i915: move modesetting core code under display/Jani Nikula
Now that we have a new subdirectory for display code, continue by moving modesetting core code. display/intel_frontbuffer.h sticks out like a sore thumb, otherwise this is, again, a surprisingly clean operation. v2: - don't move intel_sideband.[ch] (Ville) - use tabs for Makefile file lists and sort them Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190613084416.6794-3-jani.nikula@intel.com
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 05:40:57 +0000