summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/Kconfig
AgeCommit message (Collapse)Author
2024-11-04Backmerge v6.12-rc6 of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next Backmerge Linus tree for some drm-fixes needed for msm and xe merges. Signed-off-by: Dave Airlie <airlied@redhat.com>
2024-10-21i915: fix DRM_I915_GVT_KVMGT dependenciesArnd Bergmann
Depending on x86 and KVM is not enough, as the kvm helper functions that get called here are controlled by CONFIG_KVM_X86, which is disabled if both KVM_INTEL and KVM_AMD are turned off. ERROR: modpost: "kvm_write_track_remove_gfn" [drivers/gpu/drm/i915/kvmgt.ko] undefined! ERROR: modpost: "kvm_page_track_register_notifier" [drivers/gpu/drm/i915/kvmgt.ko] undefined! ERROR: modpost: "kvm_page_track_unregister_notifier" [drivers/gpu/drm/i915/kvmgt.ko] undefined! ERROR: modpost: "kvm_write_track_add_gfn" [drivers/gpu/drm/i915/kvmgt.ko] undefined! Change the dependency to CONFIG_KVM_X86 instead. Fixes: ea4290d77bda ("KVM: x86: leave kvm.ko out of the build if no vendor module is requested") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://patchwork.freedesktop.org/patch/msgid/20241015152157.2955229-1-arnd@kernel.org Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 341e4023032fba6c02326bfc6babd63ef4039712) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2024-10-18drm/i915: Select DRM_CLIENT_SELECTIONThomas Zimmermann
The Kconfig token DRM_CLIENT_SELECTION will make DRM clients available to drivers. Select it from i915. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tursulin@ursulin.net> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241014085740.582287-2-tzimmermann@suse.de
2024-09-03drm/display: split DSC helpers from DP helpersDmitry Baryshkov
Currently the DRM DSC functions are selected by the DRM_DISPLAY_DP_HELPER Kconfig symbol. This is not optimal, since the DSI code (both panel and host drivers) end up selecting the seemingly irrelevant DP helpers. Split the DSC code to be guarded by the separate DRM_DISPLAY_DSC_HELPER Kconfig symbol. Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> #i915 Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240704-panel-sw43408-fix-v6-1-3ea1c94bbb9b@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-06-19Merge drm/drm-next into drm-intel-nextJani Nikula
Sync to v6.10-rc3. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-06-07drm/i915: do not select ACPI_BUTTONJani Nikula
We stopped using ACPI button in commit 05c72e77ccda ("drm/i915: Nuke the LVDS lid notifier"). Also stop force enabling the ACPI_BUTTON config. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Closes: https://lore.kernel.org/r/ZmGsJsXhHcPV48XJ@intel.com Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/060d687c3a80cd94f065e637200dd10fea7b979f.1717747542.git.jani.nikula@intel.com
2024-03-28drm: Switch DRM_DISPLAY_HDMI_HELPER to depends onMaxime Ripard
Most of our helpers have relied on being selected so far through Kconfig, but that creates issues when we have multiple layers of helpers with some depending on others. Indeed, select doesn't select a dependency's dependencies, and thus isn't super intuitive. Depends on however doesn't have that limitation, so we can just switch all the drivers that were selecting DRM_DISPLAY_HDMI_HELPER to depend on it. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-12-eafee11b84b3@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-03-28drm: Switch DRM_DISPLAY_HDCP_HELPER to depends onMaxime Ripard
Most of our helpers have relied on being selected so far through Kconfig, but that creates issues when we have multiple layers of helpers with some depending on others. Indeed, select doesn't select a dependency's dependencies, and thus isn't super intuitive. Depends on however doesn't have that limitation, so we can just switch all the drivers that were selecting DRM_DISPLAY_HDCP_HELPER to depend on it. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-11-eafee11b84b3@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-03-28drm: Switch DRM_DISPLAY_DP_HELPER to depends onMaxime Ripard
Most of our helpers have relied on being selected so far through Kconfig, but that creates issues when we have multiple layers of helpers with some depending on others. Indeed, select doesn't select a dependency's dependencies, and thus isn't super intuitive. Depends on however doesn't have that limitation, so we can just switch all the drivers that were selecting DRM_DISPLAY_DP_HELPER to depend on it. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-10-eafee11b84b3@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-03-28drm: Switch DRM_DISPLAY_HELPER to depends onMaxime Ripard
Most of our helpers have relied on being selected so far through Kconfig, but that creates issues when we have multiple layers of helpers with some depending on others. Indeed, select doesn't select a dependency's dependencies, and thus isn't super intuitive. Depends on however doesn't have that limitation, so we can just switch all the drivers that were selecting DRM_DISPLAY_HELPER to depend on it. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-8-eafee11b84b3@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-02-28Merge tag 'drm-intel-next-2024-02-27-1' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next drm/i915 feature pull #2 for v6.9: Features and functionality: - DP tunneling and bandwidth allocation support (Imre) - Add more ADL-N PCI IDs (Gustavo) - Enable fastboot also on older platforms (Ville) - Bigjoiner force enable debugfs option for testing (Stan) Refactoring and cleanups: - Remove unused structs and struct members (Jiri Slaby) - Use per-device debug logging (Ville) - State check improvements (Ville) - Hardcoded cd2x divider cleanups (Ville) - CDCLK documentation updates (Ville, Rodrigo) Fixes: - HDCP MST Type1 fixes (Suraj) - Fix MTL C20 PHY PLL values (Ravi) - More hardware access prevention during init (Imre) - Always enable decompression with tile4 on Xe2 (Juha-Pekka) - Improve LNL package C residency (Suraj) drm core changes: - DP tunneling and bandwidth allocation helpers (Imre) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87sf1devbj.fsf@intel.com
2024-02-27drm/i915/dp: Add support for DP tunnel BW allocationImre Deak
Add support to enable the DP tunnel BW allocation mode. Follow-up patches will call the required helpers added here to prepare for a modeset on a link with DP tunnels, the last change in the patchset actually enabling BWA. With BWA enabled, the driver will expose the full mode list a display supports, regardless of any BW limitation on a shared (Thunderbolt) link. Such BW limits will be checked against only during a modeset, when the driver has the full knowledge of each display's BW requirement. If the link BW changes in a way that a connector's modelist may also change, userspace will get a hotplug notification for all the connectors sharing the same link (so it can adjust the mode used for a display). The BW limitation can change at any point, asynchronously to modesets on a given connector, so a modeset can fail even though the atomic check for it passed. In such scenarios userspace will get a bad link notification and in response is supposed to retry the modeset. v2: - Fix old vs. new connector state in intel_dp_tunnel_atomic_check_state(). (Ville) - Fix propagating the error from intel_dp_tunnel_atomic_compute_stream_bw(). (Ville) - Move tunnel==NULL checks from driver to DRM core helpers. (Ville) - Simplify return flow from intel_dp_tunnel_detect(). (Ville) - s/dp_tunnel_state/inherited_dp_tunnels (Ville) - Simplify struct intel_dp_tunnel_inherited_state. (Ville) - Unconstify object pointers (vs. states) where possible. (Ville) - Init crtc_state while declaring it in check_group_state(). (Ville) - Join obj->base.id, obj->name arg lines in debug prints to reduce LOC. (Ville) - Add/rework intel_dp_tunnel_atomic_alloc_bw() to prepare for moving the BW allocation from encoder hooks up to intel_atomic_commit_tail() later in the patchset. - Disable BW alloc mode during system suspend. - Allocate the required BW for all tunnels during system resume. - Add intel_dp_tunnel_atomic_clear_stream_bw() instead of the open-coded sequence in a follow-up patch. - Add function documentation to all exported functions. - Add CONFIG_USB4 dependency to CONFIG_DRM_I915_DP_TUNNEL. v3: - Rebase on intel_dp_get_active_pipes() change in previous patch. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240226185246.1276018-4-imre.deak@intel.com
2024-02-05drm/i915: Replace dead 01.org linkZhenyu Wang
01.org is dead so replace old gvt link with current wiki page. Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Zhi Wang <zhi.wang.linux@gmail.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20230804040544.1972958-1-zhenyuw@linux.intel.com
2023-11-11drm/i915: update in-source bug filing URLsJani Nikula
The bug filing documentation has been moved from the gitlab wiki to gitlab pages at https://drm.pages.freedesktop.org/intel-docs/. Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231110114807.3455739-2-jani.nikula@intel.com
2023-07-31fbdev: Use _IOMEM_ infix for I/O-memory helpersThomas Zimmermann
Change the infix for fbdev's I/O-memory helpers from _IO_ to _IOMEM_ to distiguish them from other types of I/O, such as file operations. The helpers operate on memory ranges in the I/O address space and the naming should make this clear. Adapt all users. No functional changes. Suggested-by: Helge Deller <deller@gmx.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Helge Deller <deller@gmx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230729193157.15446-2-tzimmermann@suse.de
2023-06-01drm/i915: Implement dedicated fbdev I/O helpersThomas Zimmermann
Implement dedicated fbdev helpers for framebuffer I/O instead of using DRM's helpers. Use an fbdev generator macro for deferred I/O to create the fbdev callbacks. i915 was the only caller of the DRM helpers, so remove them from the helper module. i915's fbdev emulation is still incomplete as it doesn't implement deferred I/O and damage handling for mmaped pages. v4: * generate deferred-I/O helpers * use initializer macros for fb_ops v2: * use FB_IO_HELPERS options Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-14-tzimmermann@suse.de
2023-05-11drm/i915: taint kernel when force probing unsupported devicesJani Nikula
For development and testing purposes, the i915.force_probe module parameter and DRM_I915_FORCE_PROBE kconfig option allow probing of devices that aren't supported by the driver. The i915.force_probe module parameter is "unsafe" and setting it taints the kernel. However, using the kconfig option does not. Always taint the kernel when force probing a device that is not supported. v2: Drop "depends on EXPERT" to avoid build breakage (kernel test robot) Fixes: 7ef5ef5cdead ("drm/i915: add force_probe module parameter to replace alpha_support") Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230504103508.1818540-1-jani.nikula@intel.com (cherry picked from commit 3312bb4ad09ca6423bd4a5b15a94588a8962fb8e) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2023-03-28drm/i915: remove unused config DRM_I915_UNSTABLEJani Nikula
Essentially this is a revert of commit d9d54a530a70 ("drm/i915: Put future HW and their uAPIs under STAGING & BROKEN"). We currently have no users for this config option. The last one was removed in commit 8c26491f5853 ("drm/i915: Kill the fake lmem support"). Drop it altogether; it's easy enough to resurrect if need arises. Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230327105330.312131-2-jani.nikula@intel.com
2023-03-02Merge tag 'drm-next-2023-03-03-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "fbdev: - fix uninit var in error path shmem: - revert unGPLing an export i915: - Don't use stolen memory or BAR mappings for ring buffers with LLC - Add inverted backlight quirk for HP 14-r206nv - Fix GSI offset for MCR lookups - GVT fixes (memleak, debugfs attributes, kconfig, typos) amdgpu: - SMU 13 fixes - Enable TMZ for GC 10.3.6 - Misc display fixes - Buddy allocator fixes - GC 11 fixes - S0ix fix - INFO IOCTL queries for GC 11 - VCN harvest fixes for SR-IOV - UMC 8.10 RAS fixes - Don't restrict bpc to 8 - NBIO 7.5 fix - Allow freesync on PCon for more devices amdkfd: - SDMA fix - Illegal memory access fix" * tag 'drm-next-2023-03-03-1' of git://anongit.freedesktop.org/drm/drm: (45 commits) drm/amdgpu/vcn: fix compilation issue with legacy gcc drm/amd/display: Extend Freesync over PCon support for more devices Revert "drm/amd/display: Do not set DRR on pipe commit" drm/amd/display: fix shift-out-of-bounds in CalculateVMAndRowBytes drm/amd/display: Ext displays with dock can't recognized after resume drm/amdgpu: fix ttm_bo calltrace warning in psp_hw_fini drm/amdgpu: remove unused variable ring drm/amd/display: fix dm irq error message in gpu recover drm/amd: Fix initialization for nbio 7.5.1 drm/amd/display: Don't restrict bpc to 8 bpc drm/amdgpu: Make umc_v8_10_convert_error_address static and remove unused variable drm/radeon: Fix eDP for single-display iMac11,2 drm/shmem-helper: Revert accidental non-GPL export drm: omapdrm: Do not use helper unininitialized in omap_fbdev_init() drm/amd/pm: downgrade log level upon SMU IF version mismatch drm/amdgpu: Add ecc info query interface for umc v8_10 drm/amdgpu: Add convert_error_address function for umc v8_10 drm/amdgpu: add bad_page_threshold check in ras_eeprom_check_err drm/amdgpu: change default behavior of bad_page_threshold parameter drm/amdgpu: exclude duplicate pages from UMC RAS UE count ...
2023-02-25Merge tag 'vfio-v6.3-rc1' of https://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO updates from Alex Williamson: - Remove redundant resource check in vfio-platform (Angus Chen) - Use GFP_KERNEL_ACCOUNT for persistent userspace allocations, allowing removal of arbitrary kernel limits in favor of cgroup control (Yishai Hadas) - mdev tidy-ups, including removing the module-only build restriction for sample drivers, Kconfig changes to select mdev support, documentation movement to keep sample driver usage instructions with sample drivers rather than with API docs, remove references to out-of-tree drivers in docs (Christoph Hellwig) - Fix collateral breakages from mdev Kconfig changes (Arnd Bergmann) - Make mlx5 migration support match device support, improve source and target flows to improve pre-copy support and reduce downtime (Yishai Hadas) - Convert additional mdev sysfs case to use sysfs_emit() (Bo Liu) - Resolve copy-paste error in mdev mbochs sample driver Kconfig (Ye Xingchen) - Avoid propagating missing reset error in vfio-platform if reset requirement is relaxed by module option (Tomasz Duszynski) - Range size fixes in mlx5 variant driver for missed last byte and stricter range calculation (Yishai Hadas) - Fixes to suspended vaddr support and locked_vm accounting, excluding mdev configurations from the former due to potential to indefinitely block kernel threads, fix underflow and restore locked_vm on new mm (Steve Sistare) - Update outdated vfio documentation due to new IOMMUFD interfaces in recent kernels (Yi Liu) - Resolve deadlock between group_lock and kvm_lock, finally (Matthew Rosato) - Fix NULL pointer in group initialization error path with IOMMUFD (Yan Zhao) * tag 'vfio-v6.3-rc1' of https://github.com/awilliam/linux-vfio: (32 commits) vfio: Fix NULL pointer dereference caused by uninitialized group->iommufd docs: vfio: Update vfio.rst per latest interfaces vfio: Update the kdoc for vfio_device_ops vfio/mlx5: Fix range size calculation upon tracker creation vfio: no need to pass kvm pointer during device open vfio: fix deadlock between group lock and kvm lock vfio: revert "iommu driver notify callback" vfio/type1: revert "implement notify callback" vfio/type1: revert "block on invalid vaddr" vfio/type1: restore locked_vm vfio/type1: track locked_vm per dma vfio/type1: prevent underflow of locked_vm via exec() vfio/type1: exclude mdevs from VFIO_UPDATE_VADDR vfio: platform: ignore missing reset if disabled at module init vfio/mlx5: Improve the target side flow to reduce downtime vfio/mlx5: Improve the source side flow upon pre_copy vfio/mlx5: Check whether VF is migratable samples: fix the prompt about SAMPLE_VFIO_MDEV_MBOCHS vfio/mdev: Use sysfs_emit() to instead of sprintf() vfio-mdev: add back CONFIG_VFIO dependency ...
2023-02-23drm/i915: move a Kconfig symbol to unbreak the menu presentationRandy Dunlap
Inserting a Kconfig symbol that does not have a dependency (DRM_I915_GVT) into a list of other symbols that do have a dependency (on DRM_I915) breaks the driver menu presentation in 'make *config'. Relocate the DRM_I915_GVT symbol so that it does not cause this problem. Fixes: 8b750bf74418 ("drm/i915/gvt: move the gvt code into kvmgt.ko") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: intel-gvt-dev@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20230215044533.4847-1-rdunlap@infradead.org
2023-01-30vfio-mdev: add back CONFIG_VFIO dependencyArnd Bergmann
CONFIG_VFIO_MDEV cannot be selected when VFIO itself is disabled, otherwise we get a link failure: WARNING: unmet direct dependencies detected for VFIO_MDEV Depends on [n]: VFIO [=n] Selected by [y]: - SAMPLE_VFIO_MDEV_MTTY [=y] && SAMPLES [=y] - SAMPLE_VFIO_MDEV_MDPY [=y] && SAMPLES [=y] - SAMPLE_VFIO_MDEV_MBOCHS [=y] && SAMPLES [=y] /home/arnd/cross/arm64/gcc-13.0.1-nolibc/x86_64-linux/bin/x86_64-linux-ld: samples/vfio-mdev/mdpy.o: in function `mdpy_remove': mdpy.c:(.text+0x1e1): undefined reference to `vfio_unregister_group_dev' /home/arnd/cross/arm64/gcc-13.0.1-nolibc/x86_64-linux/bin/x86_64-linux-ld: samples/vfio-mdev/mdpy.o: in function `mdpy_probe': mdpy.c:(.text+0x149e): undefined reference to `_vfio_alloc_device' Fixes: 8bf8c5ee1f38 ("vfio-mdev: turn VFIO_MDEV into a selectable symbol") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230126211211.1762319-1-arnd@kernel.org Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-01-23vfio-mdev: turn VFIO_MDEV into a selectable symbolChristoph Hellwig
VFIO_MDEV is just a library with helpers for the drivers. Stop making it a user choice and just select it by the drivers that use the helpers. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com> Link: https://lore.kernel.org/r/20230110091009.474427-3-hch@lst.de Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-01-17Merge tag 'drm-intel-next-2023-01-12' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next drm/i915 feature pull #1 for v6.3: Features and functionality: - Meteorlake display enabling (Animesh, Luca, Stan, Jouni, Anusha) - DP MST DSC support (Stan) - Gamma/degamma readout support for the state checker (Ville) - Enable SDP split support for DP 2.0 (Vinod) - Add probe blocking support to i915.force_probe parameter (Rodrigo) - Enable Xe HP 4tile support (Jonathan) Refactoring and cleanups: - Color refactoring, especially related to DSB usage (Ville) - DSB refactoring (Ville) - DVO refactoring (Ville) - Backlight register and logging cleanups (Jani) - Avoid display direct calls to uncore (Maarten, Jani) - Add new "soc" sub-directory (Jani) - Refactor DSC platform support checks (Swati) Fixes: - Interlace modes are no longer supported starting at display version 12 (Ankit) - Use polling read for aux control (Arun) - DMC firmware no longer requires specific versions (Gustavo) - Fix PSR flickering and freeze issues (Jouni) - Fix ICL+ DSI GPIO handling (Jani) - Ratelimit errors in display engine irqs (Lucas) - Fix DP MST DSC bpp and timeslot calculations (Stan) - Fix CDCLK squash and crawl sequences (Ville, Anusha) - Fix bigjoiner checks for fused pipes (Ville) - Fix ADP+ degamma LUT size (Ville) - Fix DVO ch7xxx and sil164 suspend/resume (Ville) - Fix memory leak in VBT parsing (Xia Fukun) - Fix VBT packet port selection for dual link DSI (Mikko Kovanen) - Fix SDP infoframe product string for discrete graphics (Clint) - Fix VLV/CHV HDMI/DP audio enable (Ville) - Fix VRR delays and calculations (Ville) - No longer disable transcoder for PHY test pattern change (Khaled) - Fix dual PPS handling (Ville) - Fix timeout and wait for DDI BUF CTL active after enabling (Ankit) Merges: - Backmerge drm-next to sync up with v6.2-rc1 (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87tu0wez34.fsf@intel.com
2023-01-10drm: Only select I2C_ALGOBIT for drivers that actually need itUwe Kleine-König
While working on a drm driver that doesn't need the i2c algobit stuff I noticed that DRM selects this code even though only 8 drivers actually use it. While also only some drivers use i2c, keep the select for I2C for the next cleanup patch. Still prepare this already by also selecting I2C for the individual drivers. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221219083627.1401627-1-u.kleine-koenig@pengutronix.de
2023-01-05drm/i915: Expand force_probe to block probe of devices as well.Rodrigo Vivi
There are new cases where we want to block i915 probe, such as when experimenting or developing the new Xe driver. But also, with the new hybrid cards, users or developers might want to use i915 only on integrated and fully block the probe of the i915 for the discrete. Or vice versa. There are even older development and validation reasons, like when you use some distro where the modprobe.blacklist is not present. But in any case, let's introduce a more granular control, but without introducing yet another parameter, but using the existent force_probe one. Just by adding a ! in the begin of the id in the force_probe, like in this case where we would block the probe for Alder Lake: $ insmod i915.ko force_probe='!46a6' v2: Take care of '*' and '!*' cases as pointed out by Gustavo and Jani. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230103194701.1492984-1-rodrigo.vivi@intel.com
2022-09-03ACPI: video: Add Nvidia WMI EC brightness control detection (v3)Hans de Goede
On some new laptop designs a new Nvidia specific WMI interface is present which gives info about panel brightness control and may allow controlling the brightness through this interface when the embedded controller is used for brightness control. When this WMI interface is present and indicates that the EC is used, then this interface should be used for brightness control. Changes in v2: - Use the new shared nvidia-wmi-ec-backlight.h header for the WMI firmware API definitions - ACPI_VIDEO can now be enabled on non X86 too, adjust the Kconfig changes to match this. Changes in v3: - Use WMI_BRIGHTNESS_GUID define Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Daniel Dadap <ddadap@nvidia.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-05-11Merge tag 'drm-intel-next-2022-05-06' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next drm/i915 feature pull #2 for v5.19: Features and functionality: - Add first set of DG2 PCI IDs for "motherboard down" designs (Matt Roper) - Add initial RPL-P PCI IDs as ADL-P subplatform (Matt Atwood) Refactoring and cleanups: - Power well refactoring and cleanup (Imre) - GVT-g refactor and mdev API cleanup (Christoph, Jason, Zhi) - DPLL refactoring and cleanup (Ville) - VBT panel specific data parsing cleanup (Ville) - Use drm_mode_init() for on-stack modes (Ville) Fixes: - Fix PSR state pipe A/B confusion by clearing more state on disable (José) - Fix FIFO underruns caused by not taking DRAM channel into account (Vinod) - Fix FBC flicker on display 11+ by enabling a workaround (José) - Fix VBT seamless DRRS min refresh rate check (Ville) - Fix panel type assumption on bogus VBT data (Ville) - Fix panel data parsing for VBT that misses panel data pointers block (Ville) - Fix spurious AUX timeout/hotplug handling on LTTPR links (Imre) Merges: - Backmerge drm-next (Jani) - GVT changes (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87bkwbkkdo.fsf@intel.com
2022-04-29Merge tag 'drm-misc-next-2022-04-28' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.19: UAPI Changes: Cross-subsystem Changes: Core Changes: - Introduction of display-helper module, and rework of the DP, DSC, HDCP, HDMI and SCDC headers - doc: Improvements for tiny drivers, link to external resources - formats: helper to convert from RGB888 and RGB565 to XRGB8888 - modes: make width-mm/height-mm check mandatory in of_get_drm_panel_display_mode - ttm: Convert from kvmalloc_array to kvcalloc Driver Changes: - bridge: - analogix_dp: Fix error handling in probe - dw_hdmi: Coccinelle fixes - it6505: Fix Kconfig dependency on DRM_DP_AUX_BUS - panel: - new panel: DataImage FG040346DSSWBG04 - amdgpu: ttm_eu cleanups - mxsfb: Rework CRTC mode setting - nouveau: Make some variables static - sun4i: Drop drm_display_info.is_hdmi caching, support for the Allwinner D1 - vc4: Drop drm_display_info.is_hdmi caching - vmwgfx: Fence improvements Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Thu 28 Apr 2022 17:52:13 AEST # gpg: using EDDSA key 5C1337A45ECA9AEB89060E9EE3EF0D6F671851C5 # gpg: Can't check signature: No public key From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220428075237.yypztjha7hetphcd@houat
2022-04-25drm/display: Move HDMI helpers into display-helper moduleThomas Zimmermann
Move DRM's HMDI helpers into the display/ subdirectoy and add it to DRM's display helpers. Update all affected drivers. No functional changes. The HDMI helpers were implemented in the EDID and connector code, but are actually unrelated. With the move to the display-helper library, we can remove the dependency on drm_edid.{c,h} in some driver's HDMI source files. Several of the HDMI helpers remain in EDID code because both share parts of their implementation internally. With better refractoring of the EDID code, those HDMI helpers could be moved into the display-helper library as well. v3: * fix Kconfig dependencies (Javier) v2: * reduce HDMI helpers to avoid exporting functions (Jani) * fix include statements (Jani, Javier) * update Kconfig symbols Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-8-tzimmermann@suse.de
2022-04-25drm/display: Move HDCP helpers into display-helper moduleThomas Zimmermann
Move DRM's HDCP helper library into the display/ subdirectory and add it to DRM's display helpers. Split the header file into core and helpers. Update all affected drivers. No functional changes. v3: * fix Kconfig dependencies v2: * fix include statements (Jani, Javier) * update Kconfig symbols Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-7-tzimmermann@suse.de
2022-04-25drm/display: Introduce a DRM display-helper moduleThomas Zimmermann
Replace the DP-helper module with a display-helper module. The support for DisplayPort becomes an internal option that drivers have to select. Update all related Kconfig and Makefile rules. Besides the existing code for DisplayPort, the new module will contain helpers for other video-output standards, such as HDMI. Drivers will have to select their required video-output helpers. Linking all display-related code into a single module avoids the proliferation of small kernel modules. The module parameters drm_dp_cec_unregister_delay, dp_aux_i2c_speed_khz, and dp_aux_i2c_transfer_size are moving from the drm_dp_helper namespace to drm_display_helper. v2: * mention module parameters in commit message (Javier) * distiguish between display module and DP support in Kconfig * update Makefile rules for DP helpers * move Kconfig rules into separate file under display/ Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-4-tzimmermann@suse.de
2022-04-21drm/i915/gsc: add gsc as a mei auxiliary deviceTomas Winkler
GSC is a graphics system controller, it provides a chassis controller for graphics discrete cards. There are two MEI interfaces in GSC: HECI1 and HECI2. Both interfaces are on the BAR0 at offsets 0x00258000 and 0x00259000. GSC is a GT Engine (class 4: instance 6). HECI1 interrupt is signaled via bit 15 and HECI2 via bit 14 in the interrupt register. This patch exports GSC as auxiliary device for mei driver to bind to for HECI2 interface and prepares for HECI1 interface as it will follow up soon. CC: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220419193314.526966-2-daniele.ceraolospurio@intel.com
2022-04-21drm/i915/gvt: move the gvt code into kvmgt.koChristoph Hellwig
Instead of having an option to build the gvt code into the main i915 module, just move it into the kvmgt.ko module. This only requires a new struct with three entries that the KVMGT modules needs to register with the main i915 module, and a proper list of GVT-enabled devices instead of global device pointer. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20220411141403.86980-7-hch@lst.de Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
2022-04-12Merge drm/drm-next into drm-intel-gt-nextJoonas Lahtinen
Pull in TTM changes needed for DG2 CCS enabling from Ram. Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2022-04-06drm/i915: Require INTEL_GTT to depend on X86Casey Bowman
The intel-gtt module is not used on other, non-x86 platforms, so we will restrict it to x86 platforms only. Signed-off-by: Casey Bowman <casey.g.bowman@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220330234809.1218210-3-casey.g.bowman@intel.com
2022-03-04Merge tag 'drm-intel-gt-next-2022-03-03' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Cross-subsystem Changes: - drm-next backmerge for buddy allocator changes Driver Changes: - Skip i915_perf init for DG2 as it is not yet enabled (Ram) - Add missing workarounds for DG2 (Clint) - Add 64K page/align support for platforms like DG2 that require it (Matt A, Ram, Bob) - Add accelerated migration support for DG2 (Matt A) - Add flat CCS support for XeHP SDV (Abdiel, Ram) - Add Compute Command Streamer (CCS) engine support for XeHP SDV (Michel, Daniele, Aravind, Matt R) - Don't support parallel submission on compute / render (Matt B, Matt R) - Disable i915 build on PREEMPT_RT until RT behaviour fixed (Sebastian) - Remove RPS interrupt support for TGL+ (Jose) - Fix S/R with PM_EARLY for non-GTT mappable objects on DG2 (Matt, Lucas) - Skip stolen memory init if it is fully reserved (Jose) - Use iosys_map for GuC data structures that may be in LMEM BAR or SMEM (Lucas) - Do not complain about stale GuC reset notifications for banned contexts (John) - Move context descriptor fields to intel_lrc.h - Start adding support for small BAR (Matt A) - Clarify vma lifetime (Thomas) - Simplify subplatform detection on TGL (Jose) - Correct the param count for unset GuC SLPC param (Vinay, Umesh) - Read RP_STATE_CAP correctly on Gen12 with GuC SLPC (Vinay) - Initialize GuC submission locks and queues early (Daniele) - Fix GuC flag query helper function to not modify state (John) - Drop fake lmem support now we have real hardware available (Lucas) - Move misplaced W/A to their correct locations (Srinivasan) - Use get_reset_domain() helper (Tejas) - Move context descriptor fields to intel_lrc.h (Matt R) - Selftest improvements (Matt A) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YiBzY1dM7bKwMQ3H@jlahtine-mobl.ger.corp.intel.com
2022-03-02drm/i915: Depend on !PREEMPT_RT.Sebastian Andrzej Siewior
There are a few sections in the driver which are not compatible with PREEMPT_RT. They trigger warnings and can lead to deadlocks at runtime. Disable the i915 driver on a PREEMPT_RT enabled kernel. This way PREEMPT_RT itself can be enabled without needing to address the i915 issues first. The RT related patches are still in RT queue and will be handled later. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YgqmfKhwU5spS069@linutronix.de
2022-02-28Backmerge tag 'v5.17-rc6' into drm-nextDave Airlie
This backmerges v5.17-rc6 so I can merge some amdgpu and some tegra changes on top. Signed-off-by: Dave Airlie <airlied@redhat.com>
2022-02-14Merge tag 'gvt-fixes-2022-01-13' of https://github.com/intel/gvt-linux into ↵Tvrtko Ursulin
drm-intel-fixes gvt-fixes-2022-01-13 - Make DRM_I915_GVT depend on X86 (Siva Mullati) - Clean kernel doc in gtt.c (Randy Dunlap) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> From: Zhi Wang <zhi.wang.linux@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/1f619581-e3da-3899-09ac-f714d954a580@gmail.com
2022-01-19drm: move the buddy allocator from i915 into common drmArunpravin
Move the base i915 buddy allocator code into drm - Move i915_buddy.h to include/drm - Move i915_buddy.c to drm root folder - Rename "i915" string with "drm" string wherever applicable - Rename "I915" string with "DRM" string wherever applicable - Fix header file dependencies - Fix alignment issues - add Makefile support for drm buddy - export functions and write kerneldoc description - Remove i915 selftest config check condition as buddy selftest will be moved to drm selftest folder cleanup i915 buddy references in i915 driver module and replace with drm buddy v2: - include header file in alphabetical order(Thomas) - merged changes listed in the body section into a single patch to keep the build intact(Christian, Jani) v3: - make drm buddy a separate module(Thomas, Christian) v4: - Fix build error reported by kernel test robot <lkp@intel.com> - removed i915 buddy selftest from i915_mock_selftests.h to avoid build error - removed selftests/i915_buddy.c file as we create a new set of buddy test cases in drm/selftests folder v5: - Fix merge conflict issue v6: - replace drm_buddy_mm structure name as drm_buddy(Thomas, Christian) - replace drm_buddy_alloc() function name as drm_buddy_alloc_blocks() (Thomas) - replace drm_buddy_free() function name as drm_buddy_free_block() (Thomas) - export drm_buddy_free_block() function - fix multiple instances of KMEM_CACHE() entry v7: - fix warnings reported by kernel test robot <lkp@intel.com> - modify the license(Christian) v8: - fix warnings reported by kernel test robot <lkp@intel.com> Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220118104504.2349-1-Arunpravin.PaneerSelvam@amd.com Signed-off-by: Christian König <christian.koenig@amd.com>
2022-01-17drm/dp: Move DisplayPort helpers into separate helper moduleThomas Zimmermann
Move DisplayPort functions into a separate module to reduce the size of the KMS helpers. Select DRM_DP_HELPER for all users of the code. To avoid naming conflicts, rename drm_dp_helper.c to drm_dp.c This change can help to reduce the size of the kernel binary. Some numbers from a x86-64 test build: Before: drm_kms_helper.ko: 447480 bytes After: drm_dp_helper.ko: 216632 bytes drm_kms_helper.ko: 239424 bytes For early-boot graphics, generic DRM drivers, such as simpledrm, require DRM KMS helpers to be built into the kernel. Generic helper functions for DisplayPort take up a significant portion of DRM KMS helper library. These functions are not used by generic drivers and can be loaded as a module. v3: * fix include statement in DRM selftests v2: * move DP helper code into dp/ (Jani) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220114114535.29157-4-tzimmermann@suse.de
2022-01-13drm/i915/gvt: Make DRM_I915_GVT depend on X86Siva Mullati
GVT is not supported on non-x86 platforms, So add dependency of X86 on config parameter DRM_I915_GVT. Fixes: 0ad35fed618c ("drm/i915: gvt: Introduce the basic architecture of GVT-g") Signed-off-by: Siva Mullati <siva.mullati@intel.com> Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20220107095235.243448-1-siva.mullati@intel.com Reviewed-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
2021-11-22Merge drm/drm-next into drm-intel-nextJani Nikula
Sync up with drm-next to get v5.16-rc2. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-11-02Merge tag 'drm-next-2021-11-03' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "Summary below. i915 starts to add support for DG2 GPUs, enables DG1 and ADL-S support by default, lots of work to enable DisplayPort 2.0 across drivers. Lots of documentation updates and fixes across the board. core: - improve dma_fence, lease and resv documentation - shmem-helpers: allocate WC pages on x86, use vmf_insert_pin - sched fixes/improvements - allow empty drm leases - add dma resv iterator - add more DP 2.0 headers - DP MST helper improvements for DP2.0 dma-buf: - avoid warnings, remove fence trace macros bridge: - new helper to get rid of panels - probe improvements for it66121 - enable DSI EOTP for anx7625 fbdev: - efifb: release runtime PM on destroy ttm: - kerneldoc switch - helper to clear all DMA mappings - pool shrinker optimizaton - remove ttm_tt_destroy_common - update ttm_move_memcpy for async use panel: - add new panel-edp driver amdgpu: - Initial DP 2.0 support - Initial USB4 DP tunnelling support - Aldebaran MCE support - Modifier support for DCC image stores for GFX 10.3 - Display rework for better FP code handling - Yellow Carp/Cyan Skillfish updates - Cyan Skillfish display support - convert vega/navi to IP discovery asic enumeration - validate IP discovery table - RAS improvements - Lots of fixes i915: - DG1 PCI IDs + LMEM discovery/placement - DG1 GuC submission by default - ADL-S PCI IDs updated + enabled by default - ADL-P (XE_LPD) fixed and updates - DG2 display fixes - PXP protected object support for Gen12 integrated - expose multi-LRC submission interface for GuC - export logical engine instance to user - Disable engine bonding on Gen12+ - PSR cleanup - PSR2 selective fetch by default - DP 2.0 prep work - VESA vendor block + MSO use of it - FBC refactor - try again to fix fast-narrow vs slow-wide eDP training - use THP when IOMMU enabled - LMEM backup/restore for suspend/resume - locking simplification - GuC major reworking - async flip VT-D workaround changes - DP link training improvements - misc display refactorings bochs: - new PCI ID rcar-du: - Non-contiguious buffer import support for rcar-du - r8a779a0 support prep omapdrm: - COMPILE_TEST fixes sti: - COMPILE_TEST fixes msm: - fence ordering improvements - eDP support in DP sub-driver - dpu irq handling cleanup - CRC support for making igt happy - NO_CONNECTOR bridge support - dsi: 14nm phy support for msm8953 - mdp5: msm8x53, sdm450, sdm632 support stm: - layer alpha + zpo support v3d: - fix Vulkan CTS failure - support multiple sync objects gud: - add R8/RGB332/RGB888 pixel formats vc4: - convert to new bridge helpers vgem: - use shmem helpers virtio: - support mapping exported vram zte: - remove obsolete driver rockchip: - use bridge attach no connector for LVDS/RGB" * tag 'drm-next-2021-11-03' of git://anongit.freedesktop.org/drm/drm: (1259 commits) drm/amdgpu/gmc6: fix DMA mask from 44 to 40 bits drm/amd/display: MST support for DPIA drm/amdgpu: Fix even more out of bound writes from debugfs drm/amdgpu/discovery: add SDMA IP instance info for soc15 parts drm/amdgpu/discovery: add UVD/VCN IP instance info for soc15 parts drm/amdgpu/UAPI: rearrange header to better align related items drm/amd/display: Enable dpia in dmub only for DCN31 B0 drm/amd/display: Fix USB4 hot plug crash issue drm/amd/display: Fix deadlock when falling back to v2 from v3 drm/amd/display: Fallback to clocks which meet requested voltage on DCN31 drm/amd/display: move FPU associated DCN301 code to DML folder drm/amd/display: fix link training regression for 1 or 2 lane drm/amd/display: add two lane settings training options drm/amd/display: decouple hw_lane_settings from dpcd_lane_settings drm/amd/display: implement decide lane settings drm/amd/display: adopt DP2.0 LT SCR revision 8 drm/amd/display: FEC configuration for dpia links in MST mode drm/amd/display: FEC configuration for dpia links drm/amd/display: Add workaround flag for EDID read on certain docks drm/amd/display: Set phy_mux_sel bit in dmub scratch register ...
2021-10-27drm/i915: abstraction for iosf to compile on all archsMullati, Siva
The asm/iosf_mbi.h header is x86-only. Let's make IOSF_MBI kconfig selection conditional to x86 and provide a header with stubs for other architectures. This helps getting i915 available for other architectures in future. Signed-off-by: Mullati, Siva <siva.mullati@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211022192756.1228354-1-siva.mullati@intel.com
2021-10-15drm/i915: Clean up PXP Kconfig info.Rodrigo Vivi
During the review I focused on stop the using of the "+" to reference the newer platforms, but I forgot that we are in a process of making things more clear and differentiate graphics and display versions. So, let me to clean up this a bit. Also, we don't need any version mentioned in the config menu entry, only in the help. Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211015090916.82968-1-rodrigo.vivi@intel.com
2021-10-04drm/i915/pxp: define PXP device flag and kconfigDaniele Ceraolo Spurio
Ahead of the PXP implementation, define the relevant define flag and kconfig option. v2: flip kconfig default to N. Some machines have IFWIs that do not support PXP, so we need it to be an opt-in until we add support to query the caps from the mei device. v10: change comments from "Gen12+" to "Gen12 and newer" Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210924191452.1539378-4-alan.previn.teres.alexis@intel.com
2021-10-01KVM: x86: add config for non-kvm users of page trackingDavid Stevens
Add a config option that allows kvm to determine whether or not there are any external users of page tracking. Signed-off-by: David Stevens <stevensd@chromium.org> Message-Id: <20210922045859.2011227-2-stevensd@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-03Merge tag 'vfio-v5.14-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO updates from Alex Williamson: - Module reference fixes, structure renaming (Max Gurtovoy) - Export and use common pci_dev_trylock() (Luis Chamberlain) - Enable direct mdev device creation and probing by parent (Christoph Hellwig & Jason Gunthorpe) - Fix mdpy error path leak (Colin Ian King) - Fix mtty list entry leak (Jason Gunthorpe) - Enforce mtty device limit (Alex Williamson) - Resolve concurrent vfio-pci mmap faults (Alex Williamson) * tag 'vfio-v5.14-rc1' of git://github.com/awilliam/linux-vfio: vfio/pci: Handle concurrent vma faults vfio/mtty: Enforce available_instances vfio/mtty: Delete mdev_devices_list vfio: use the new pci_dev_trylock() helper to simplify try lock PCI: Export pci_dev_trylock() and pci_dev_unlock() vfio/mdpy: Fix memory leak of object mdev_state->vconfig vfio/iommu_type1: rename vfio_group struck to vfio_iommu_group vfio/mbochs: Convert to use vfio_register_group_dev() vfio/mdpy: Convert to use vfio_register_group_dev() vfio/mtty: Convert to use vfio_register_group_dev() vfio/mdev: Allow the mdev_parent_ops to specify the device driver to bind vfio/mdev: Remove CONFIG_VFIO_MDEV_DEVICE driver core: Export device_driver_attach() driver core: Don't return EPROBE_DEFER to userspace during sysfs bind driver core: Flow the return code from ->probe() through to sysfs bind driver core: Better distinguish probe errors in really_probe driver core: Pull required checks into driver_probe_device() vfio/platform: remove unneeded parent_module attribute vfio: centralize module refcount in subsystem layer
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 06:40:29 +0000