| Age | Commit message (Collapse) | Author |
|---|
|
KVM x86 misc changes for 6.17
- Prevert the host's DEBUGCTL.FREEZE_IN_SMM (Intel only) when running the
guest. Failure to honor FREEZE_IN_SMM can bleed host state into the guest.
- Explicitly check vmcs12.GUEST_DEBUGCTL on nested VM-Enter (Intel only) to
prevent L1 from running L2 with features that KVM doesn't support, e.g. BTF.
- Intercept SPEC_CTRL on AMD if the MSR shouldn't exist according to the
vCPU's CPUID model.
- Rework the MSR interception code so that the SVM and VMX APIs are more or
less identical.
- Recalculate all MSR intercepts from the "source" on MSR filter changes, and
drop the dedicated "shadow" bitmaps (and their awful "max" size defines).
- WARN and reject loading kvm-amd.ko instead of panicking the kernel if the
nested SVM MSRPM offsets tracker can't handle an MSR.
- Advertise support for LKGS (Load Kernel GS base), a new instruction that's
loosely related to FRED, but is supported and enumerated independently.
- Fix a user-triggerable WARN that syzkaller found by stuffing INIT_RECEIVED,
a.k.a. WFS, and then putting the vCPU into VMX Root Mode (post-VMXON). Use
the same approach KVM uses for dealing with "impossible" emulation when
running a !URG guest, and simply wait until KVM_RUN to detect that the vCPU
has architecturally impossible state.
- Add KVM_X86_DISABLE_EXITS_APERFMPERF to allow disabling interception of
APERF/MPERF reads, so that a "properly" configured VM can "virtualize"
APERF/MPERF (with many caveats).
- Reject KVM_SET_TSC_KHZ if vCPUs have been created, as changing the "default"
frequency is unsupported for VMs with a "secure" TSC, and there's no known
use case for changing the default frequency for other VM types.
|
|
Advertise support for LKGS (load into IA32_KERNEL_GS_BASE) to userspace
if the instruction is supported by the underlying CPU.
LKGS is introduced with FRED to completely eliminate the need to swapgs
explicilty. It behaves like the MOV to GS instruction except that it
loads the base address into the IA32_KERNEL_GS_BASE MSR instead of the
GS segment’s descriptor cache, which is exactly what Linux kernel does
to load a user level GS base. Thus there is no need to SWAPGS away
from the kernel GS base.
LKGS is an independent CPU feature that works correctly in a KVM guest
without requiring explicit enablement.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Link: https://lore.kernel.org/r/20250626173521.2301088-1-xin@zytor.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Synthesize the TSA CPUID feature bits for guests. Set TSA_{SQ,L1}_NO on
unaffected machines.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
Pull more kvm updates from Paolo Bonzini:
Generic:
- Clean up locking of all vCPUs for a VM by using the *_nest_lock()
family of functions, and move duplicated code to virt/kvm/. kernel/
patches acked by Peter Zijlstra
- Add MGLRU support to the access tracking perf test
ARM fixes:
- Make the irqbypass hooks resilient to changes in the GSI<->MSI
routing, avoiding behind stale vLPI mappings being left behind. The
fix is to resolve the VGIC IRQ using the host IRQ (which is stable)
and nuking the vLPI mapping upon a routing change
- Close another VGIC race where vCPU creation races with VGIC
creation, leading to in-flight vCPUs entering the kernel w/o
private IRQs allocated
- Fix a build issue triggered by the recently added workaround for
Ampere's AC04_CPU_23 erratum
- Correctly sign-extend the VA when emulating a TLBI instruction
potentially targeting a VNCR mapping
- Avoid dereferencing a NULL pointer in the VGIC debug code, which
can happen if the device doesn't have any mapping yet
s390:
- Fix interaction between some filesystems and Secure Execution
- Some cleanups and refactorings, preparing for an upcoming big
series
x86:
- Wait for target vCPU to ack KVM_REQ_UPDATE_PROTECTED_GUEST_STATE
to fix a race between AP destroy and VMRUN
- Decrypt and dump the VMSA in dump_vmcb() if debugging enabled for
the VM
- Refine and harden handling of spurious faults
- Add support for ALLOWED_SEV_FEATURES
- Add #VMGEXIT to the set of handlers special cased for
CONFIG_RETPOLINE=y
- Treat DEBUGCTL[5:2] as reserved to pave the way for virtualizing
features that utilize those bits
- Don't account temporary allocations in sev_send_update_data()
- Add support for KVM_CAP_X86_BUS_LOCK_EXIT on SVM, via Bus Lock
Threshold
- Unify virtualization of IBRS on nested VM-Exit, and cross-vCPU
IBPB, between SVM and VMX
- Advertise support to userspace for WRMSRNS and PREFETCHI
- Rescan I/O APIC routes after handling EOI that needed to be
intercepted due to the old/previous routing, but not the
new/current routing
- Add a module param to control and enumerate support for device
posted interrupts
- Fix a potential overflow with nested virt on Intel systems running
32-bit kernels
- Flush shadow VMCSes on emergency reboot
- Add support for SNP to the various SEV selftests
- Add a selftest to verify fastops instructions via forced emulation
- Refine and optimize KVM's software processing of the posted
interrupt bitmap, and share the harvesting code between KVM and the
kernel's Posted MSI handler"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (93 commits)
rtmutex_api: provide correct extern functions
KVM: arm64: vgic-debug: Avoid dereferencing NULL ITE pointer
KVM: arm64: vgic-init: Plug vCPU vs. VGIC creation race
KVM: arm64: Unmap vLPIs affected by changes to GSI routing information
KVM: arm64: Resolve vLPI by host IRQ in vgic_v4_unset_forwarding()
KVM: arm64: Protect vLPI translation with vgic_irq::irq_lock
KVM: arm64: Use lock guard in vgic_v4_set_forwarding()
KVM: arm64: Mask out non-VA bits from TLBI VA* on VNCR invalidation
arm64: sysreg: Drag linux/kconfig.h to work around vdso build issue
KVM: s390: Simplify and move pv code
KVM: s390: Refactor and split some gmap helpers
KVM: s390: Remove unneeded srcu lock
s390: Remove unneeded includes
s390/uv: Improve splitting of large folios that cannot be split while dirty
s390/uv: Always return 0 from s390_wiggle_split_folio() if successful
s390/uv: Don't return 0 from make_hva_secure() if the operation was not successful
rust: add helper for mutex_trylock
RISC-V: KVM: use kvm_trylock_all_vcpus when locking all vCPUs
KVM: arm64: use kvm_trylock_all_vcpus when locking all vCPUs
x86: KVM: SVM: use kvm_lock_all_vcpus instead of a custom implementation
...
|
|
Pull kvm updates from Paolo Bonzini:
"As far as x86 goes this pull request "only" includes TDX host support.
Quotes are appropriate because (at 6k lines and 100+ commits) it is
much bigger than the rest, which will come later this week and
consists mostly of bugfixes and selftests. s390 changes will also come
in the second batch.
ARM:
- Add large stage-2 mapping (THP) support for non-protected guests
when pKVM is enabled, clawing back some performance.
- Enable nested virtualisation support on systems that support it,
though it is disabled by default.
- Add UBSAN support to the standalone EL2 object used in nVHE/hVHE
and protected modes.
- Large rework of the way KVM tracks architecture features and links
them with the effects of control bits. While this has no functional
impact, it ensures correctness of emulation (the data is
automatically extracted from the published JSON files), and helps
dealing with the evolution of the architecture.
- Significant changes to the way pKVM tracks ownership of pages,
avoiding page table walks by storing the state in the hypervisor's
vmemmap. This in turn enables the THP support described above.
- New selftest checking the pKVM ownership transition rules
- Fixes for FEAT_MTE_ASYNC being accidentally advertised to guests
even if the host didn't have it.
- Fixes for the address translation emulation, which happened to be
rather buggy in some specific contexts.
- Fixes for the PMU emulation in NV contexts, decoupling PMCR_EL0.N
from the number of counters exposed to a guest and addressing a
number of issues in the process.
- Add a new selftest for the SVE host state being corrupted by a
guest.
- Keep HCR_EL2.xMO set at all times for systems running with the
kernel at EL2, ensuring that the window for interrupts is slightly
bigger, and avoiding a pretty bad erratum on the AmpereOne HW.
- Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers
from a pretty bad case of TLB corruption unless accesses to HCR_EL2
are heavily synchronised.
- Add a per-VM, per-ITS debugfs entry to dump the state of the ITS
tables in a human-friendly fashion.
- and the usual random cleanups.
LoongArch:
- Don't flush tlb if the host supports hardware page table walks.
- Add KVM selftests support.
RISC-V:
- Add vector registers to get-reg-list selftest
- VCPU reset related improvements
- Remove scounteren initialization from VCPU reset
- Support VCPU reset from userspace using set_mpstate() ioctl
x86:
- Initial support for TDX in KVM.
This finally makes it possible to use the TDX module to run
confidential guests on Intel processors. This is quite a large
series, including support for private page tables (managed by the
TDX module and mirrored in KVM for efficiency), forwarding some
TDVMCALLs to userspace, and handling several special VM exits from
the TDX module.
This has been in the works for literally years and it's not really
possible to describe everything here, so I'll defer to the various
merge commits up to and including commit 7bcf7246c42a ('Merge
branch 'kvm-tdx-finish-initial' into HEAD')"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (248 commits)
x86/tdx: mark tdh_vp_enter() as __flatten
Documentation: virt/kvm: remove unreferenced footnote
RISC-V: KVM: lock the correct mp_state during reset
KVM: arm64: Fix documentation for vgic_its_iter_next()
KVM: arm64: np-guest CMOs with PMD_SIZE fixmap
KVM: arm64: Stage-2 huge mappings for np-guests
KVM: arm64: Add a range to pkvm_mappings
KVM: arm64: Convert pkvm_mappings to interval tree
KVM: arm64: Add a range to __pkvm_host_test_clear_young_guest()
KVM: arm64: Add a range to __pkvm_host_wrprotect_guest()
KVM: arm64: Add a range to __pkvm_host_unshare_guest()
KVM: arm64: Add a range to __pkvm_host_share_guest()
KVM: arm64: Introduce for_each_hyp_page
KVM: arm64: Handle huge mappings for np-guest CMOs
KVM: arm64: nv: Release faulted-in VNCR page from mmu_lock critical section
KVM: arm64: nv: Handle TLBI S1E2 for VNCR invalidation with mmu_lock held
KVM: arm64: nv: Hold mmu_lock when invalidating VNCR SW-TLB before translating
RISC-V: KVM: add KVM_CAP_RISCV_MP_STATE_RESET
RISC-V: KVM: Remove scounteren initialization
KVM: RISC-V: remove unnecessary SBI reset state
...
|
|
hypervisor_cpuid_base()/for_each_possible_hypervisor_cpuid_base() to cpuid_base_hypervisor()/for_each_possible_cpuid_base_hypervisor()
In order to let all the APIs under <cpuid/api.h> have a shared "cpuid_"
namespace, rename hypervisor_cpuid_base() to cpuid_base_hypervisor().
To align with the new style, also rename:
for_each_possible_hypervisor_cpuid_base(function)
to:
for_each_possible_cpuid_base_hypervisor(function)
Adjust call-sites accordingly.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/aCZOi0Oohc7DpgTo@lx-t490
|
|
The main CPUID header <asm/cpuid.h> was originally a storefront for the
headers:
<asm/cpuid/api.h>
<asm/cpuid/leaf_0x2_api.h>
Now that the latter CPUID(0x2) header has been merged into the former,
there is no practical difference between <asm/cpuid.h> and
<asm/cpuid/api.h>.
Migrate all users to the <asm/cpuid/api.h> header, in preparation of
the removal of <asm/cpuid.h>.
Don't remove <asm/cpuid.h> just yet, in case some new code in -next
started using it.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250508150240.172915-3-darwi@linutronix.de
|
|
The latest AMD platform has introduced a new instruction called PREFETCHI.
This instruction loads a cache line from a specified memory address into
the indicated data or instruction cache level, based on locality reference
hints.
Feature bit definition:
CPUID_Fn80000021_EAX [bit 20] - Indicates support for IC prefetch.
This feature is analogous to Intel's PREFETCHITI (CPUID.(EAX=7,ECX=1):EDX),
though the CPUID bit definitions differ between AMD and Intel.
Advertise support to userspace, as no additional enabling is necessary
(PREFETCHI can't be intercepted as there's no instruction specific behavior
that needs to be virtualize).
The feature is documented in Processor Programming Reference (PPR)
for AMD Family 1Ah Model 02h, Revision C1 (Link below).
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Signed-off-by: Babu Moger <babu.moger@amd.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/ee1c08fc400bb574a2b8f2c6a0bd9def10a29d35.1744130533.git.babu.moger@amd.com
[sean: rewrite shortlog to highlight the KVM functionality]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
WRMSR_XX_BASE_NS is bit 1 so put it there, add some new bits as
comments only.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250324160617.15379-1-bp@kernel.org
[sean: skip the FSRS/FSRC placeholders to avoid confusion]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Advertise support for WRMSRNS (WRMSR non-serializing) to userspace if the
instruction is supported by the underlying CPU. From a virtualization
perspective, the only difference between WRMSRNS and WRMSR is that VM-Exits
due to WRMSRNS set EXIT_QUALIFICATION to '1'. WRMSRNS doesn't require a
new enabling control, shares the same basic exit reason, and behaves the
same as WRMSR with respect to MSR interception.
WRMSR and WRMSRNS use the same basic exit reason (see Appendix C). For
WRMSR, the exit qualification is 0, while for WRMSRNS it is 1.
Don't do anything different when emulating WRMSRNS vs. WRMSR, as KVM can't
do anything less, i.e. can't make emulation non-serializing. The
motivation for the guest to use WRMSRNS instead of WRMSR is to avoid
immediately serializing the CPU when the necessary serialization is
guaranteed by some other mechanism, i.e. WRMSRNS being fully serializing
isn't guest-visible, just less performant.
Suggested-by: Xin Li (Intel) <xin@zytor.com>
Link: https://lore.kernel.org/r/20250227010111.3222742-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
If IBRS provides same mode (kernel/user or host/guest) protection on the
host, then by definition it also provides same mode protection in the
guest. In fact, all different modes from the guest's perspective are the
same mode from the host's perspective anyway.
Propagate IbrsSameMode to the guests.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20250221163352.3818347-3-yosry.ahmed@linux.dev
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
This large commit contains the initial support for TDX in KVM. All x86
parts enable the host-side hypercalls that KVM uses to talk to the TDX
module, a software component that runs in a special CPU mode called SEAM
(Secure Arbitration Mode).
The series is in turn split into multiple sub-series, each with a separate
merge commit:
- Initialization: basic setup for using the TDX module from KVM, plus
ioctls to create TDX VMs and vCPUs.
- MMU: in TDX, private and shared halves of the address space are mapped by
different EPT roots, and the private half is managed by the TDX module.
Using the support that was added to the generic MMU code in 6.14,
add support for TDX's secure page tables to the Intel side of KVM.
Generic KVM code takes care of maintaining a mirror of the secure page
tables so that they can be queried efficiently, and ensuring that changes
are applied to both the mirror and the secure EPT.
- vCPU enter/exit: implement the callbacks that handle the entry of a TDX
vCPU (via the SEAMCALL TDH.VP.ENTER) and the corresponding save/restore
of host state.
- Userspace exits: introduce support for guest TDVMCALLs that KVM forwards to
userspace. These correspond to the usual KVM_EXIT_* "heavyweight vmexits"
but are triggered through a different mechanism, similar to VMGEXIT for
SEV-ES and SEV-SNP.
- Interrupt handling: support for virtual interrupt injection as well as
handling VM-Exits that are caused by vectored events. Exclusive to
TDX are machine-check SMIs, which the kernel already knows how to
handle through the kernel machine check handler (commit 7911f145de5f,
"x86/mce: Implement recovery for errors in TDX/SEAM non-root mode")
- Loose ends: handling of the remaining exits from the TDX module, including
EPT violation/misconfig and several TDVMCALL leaves that are handled in
the kernel (CPUID, HLT, RDMSR/WRMSR, GetTdVmCallInfo); plus returning
an error or ignoring operations that are not supported by TDX guests
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Explicitly zero/empty-initialize the unions used for PMU related CPUID
entries, instead of manually zeroing all fields (hopefully), or in the
case of 0x80000022, relying on the compiler to clobber the uninitialized
bitfields.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-ID: <20250315024102.2361628-1-seanjc@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM Xen changes for 6.15
- Don't write to the Xen hypercall page on MSR writes that are initiated by
the host (userspace or KVM) to fix a class of bugs where KVM can write to
guest memory at unexpected times, e.g. during vCPU creation if userspace has
set the Xen hypercall MSR index to collide with an MSR that KVM emulates.
- Restrict the Xen hypercall MSR indx to the unofficial synthetic range to
reduce the set of possible collisions with MSRs that are emulated by KVM
(collisions can still happen as KVM emulates Hyper-V MSRs, which also reside
in the synthetic range).
- Clean up and optimize KVM's handling of Xen MSR writes and xen_hvm_config.
- Update Xen TSC leaves during CPUID emulation instead of modifying the CPUID
entries when updating PV clocks, as there is no guarantee PV clocks will be
updated between TSC frequency changes and CPUID emulation, and guest reads
of Xen TSC should be rare, i.e. are not a hot path.
|
|
KVM x86 misc changes for 6.15:
- Fix a bug in PIC emulation that caused KVM to emit a spurious KVM_REQ_EVENT.
- Add a helper to consolidate handling of mp_state transitions, and use it to
clear pv_unhalted whenever a vCPU is made RUNNABLE.
- Defer runtime CPUID updates until KVM emulates a CPUID instruction, to
coalesce updates when multiple pieces of vCPU state are changing, e.g. as
part of a nested transition.
- Fix a variety of nested emulation bugs, and add VMX support for synthesizing
nested VM-Exit on interception (instead of injecting #UD into L2).
- Drop "support" for PV Async #PF with proctected guests without SEND_ALWAYS,
as KVM can't get the current CPL.
- Misc cleanups
|
|
For TDX, the maxpa (CPUID.0x80000008.EAX[7:0]) is fixed as native and
the max_gpa (CPUID.0x80000008.EAX[23:16]) is configurable and used
to configure the EPT level and GPAW.
Use max_gpa to determine the TDP level.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
CPUID values are provided for TDX virtual machines as part of the
KVM_TDX_INIT_VM ioctl. Unlike KVM_SET_CPUID2, TDX will need to
examine the leaves, either to validate against the CPUIDs listed
in the TDX modules configuration or to fill other controls with
matching values.
Since there is an existing function to look up a leaf/index pair
into a given list of CPUID entries, export it as kvm_find_cpuid_entry2().
Reviewed-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Remove dead/unreachable (and misguided) code in KVM's processing of
0x80000022. The case statement breaks early if PERFMON_V2 isnt supported,
i.e. kvm_cpu_cap_has(X86_FEATURE_PERFMON_V2) must be true when KVM reaches
the code code to setup EBX.
Note, early versions of the patch that became commit 94cdeebd8211 ("KVM:
x86/cpuid: Add AMD CPUID ExtPerfMonAndDbg leaf 0x80000022") didn't break
early on lack of PERFMON_V2 support, and instead enumerated the effective
number of counters KVM could emulate. All of that code was flawed, e.g.
the APM explicitly states EBX is valid only for v2.
Performance Monitoring Version 2 supported. When set,
CPUID_Fn8000_0022_EBX reports the number of available performance counters.
When the flaw of not respecting v2 support was addressed, the misguided
stuffing of the number of counters got left behind.
Link: https://lore.kernel.org/all/20220919093453.71737-4-likexu@tencent.com
Fixes: 94cdeebd8211 ("KVM: x86/cpuid: Add AMD CPUID ExtPerfMonAndDbg leaf 0x80000022")
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20250304082314.472202-2-xiaoyao.li@intel.com
[sean: elaborate on the situation a bit more, add Fixes]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Fix a goof where KVM sets CPUID.0x80000022.EAX to CPUID.0x80000022.EBX
instead of zeroing both when PERFMON_V2 isn't supported by KVM. In
practice, barring a buggy CPU (or vCPU model when running nested) only the
!enable_pmu case is affected, as KVM always supports PERFMON_V2 if it's
available in hardware, i.e. CPUID.0x80000022.EBX will be '0' if PERFMON_V2
is unsupported.
For the !enable_pmu case, the bug is relatively benign as KVM will refuse
to enable PMU capabilities, but a VMM that reflects KVM's supported CPUID
into the guest could inadvertently induce #GPs in the guest due to
advertising support for MSRs that KVM refuses to emulate.
Fixes: 94cdeebd8211 ("KVM: x86/cpuid: Add AMD CPUID ExtPerfMonAndDbg leaf 0x80000022")
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20250304082314.472202-3-xiaoyao.li@intel.com
[sean: massage shortlog and changelog, tag for stable]
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The Xen emulation in KVM modifies certain CPUID leaves to expose
TSC information to the guest.
Previously, these CPUID leaves were updated whenever guest time changed,
but this conflicts with KVM_SET_CPUID/KVM_SET_CPUID2 ioctls which reject
changes to CPUID entries on running vCPUs.
Fix this by updating the TSC information directly in the CPUID emulation
handler instead of modifying the vCPU's CPUID entries.
Signed-off-by: Fred Griffoul <fgriffo@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20250124150539.69975-1-fgriffo@amazon.co.uk
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Defer runtime CPUID updates until the next non-faulting CPUID emulation
or KVM_GET_CPUID2, which are the only paths in KVM that consume the
dynamic entries. Deferring the updates is especially beneficial to
nested VM-Enter/VM-Exit, as KVM will almost always detect multiple state
changes, not to mention the updates don't need to be realized while L2 is
active if CPUID is being intercepted by L1 (CPUID is a mandatory intercept
on Intel, but not AMD).
Deferring CPUID updates shaves several hundred cycles from nested VMX
roundtrips, as measured from L2 executing CPUID in a tight loop:
SKX 6850 => 6450
ICX 9000 => 8800
EMR 7900 => 7700
Alternatively, KVM could update only the CPUID leaves that are affected
by the state change, e.g. update XSAVE info only if XCR0 or XSS changes,
but that adds non-trivial complexity and doesn't solve the underlying
problem of nested transitions potentially changing both XCR0 and XSS, on
both nested VM-Enter and VM-Exit.
Skipping updates entirely if L2 is active and CPUID is being intercepted
by L1 could work for the common case. However, simply skipping updates if
L2 is active is *very* subtly dangerous and complex. Most KVM updates are
triggered by changes to the current vCPU state, which may be L2 state,
whereas performing updates only for L1 would requiring detecting changes
to L1 state. KVM would need to either track relevant L1 state, or defer
runtime CPUID updates until the next nested VM-Exit. The former is ugly
and complex, while the latter comes with similar dangers to deferring all
CPUID updates, and would only address the nested VM-Enter path.
To guard against using stale data, disallow querying dynamic CPUID feature
bits, i.e. features that KVM updates at runtime, via a compile-time
assertion in guest_cpu_cap_has(). Exempt MWAIT from the rule, as the
MISC_ENABLE_NO_MWAIT means that MWAIT is _conditionally_ a dynamic CPUID
feature.
Note, the rule could be enforced for MWAIT as well, e.g. by querying guest
CPUID in kvm_emulate_monitor_mwait, but there's no obvious advtantage to
doing so, and allowing MWAIT for guest_cpuid_has() opens up a different can
of worms. MONITOR/MWAIT can't be virtualized (for a reasonable definition),
and the nature of the MWAIT_NEVER_UD_FAULTS and MISC_ENABLE_NO_MWAIT quirks
means checking X86_FEATURE_MWAIT outside of kvm_emulate_monitor_mwait() is
wrong for other reasons.
Beyond the aforementioned feature bits, the only other dynamic CPUID
(sub)leaves are the XSAVE sizes, and similar to MWAIT, consuming those
CPUID entries in KVM is all but guaranteed to be a bug. The layout for an
actual XSAVE buffer depends on the format (compacted or not) and
potentially the features that are actually enabled. E.g. see the logic in
fpstate_clear_xstate_component() needed to poke into the guest's effective
XSAVE state to clear MPX state on INIT. KVM does consume
CPUID.0xD.0.{EAX,EDX} in kvm_check_cpuid() and cpuid_get_supported_xcr0(),
but not EBX, which is the only dynamic output register in the leaf.
Link: https://lore.kernel.org/r/20241211013302.1347853-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When emulating CPUID, retrieve MSR_IA32_TSX_CTRL.TSX_CTRL_CPUID_CLEAR if
and only if RTM and/or HLE feature bits need to be cleared. Getting the
MSR value is unnecessary if neither bit is set, and avoiding the lookup
saves ~80 cycles for vCPUs without RTM or HLE.
Cc: Jim Mattson <jmattson@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20241211013302.1347853-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Rework xstate_required_size() to use a for-loop and continue, to make it
more obvious that the xstate_sizes[] lookups are indeed correctly bounded,
and to make it (hopefully) easier to understand that the loop is iterating
over supported XSAVE features.
Link: https://lore.kernel.org/r/20241211013302.1347853-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The default type of a decimal constant is determined by the magnitude of
its value. If the value falls within the range of int, its type is int;
otherwise, if it falls within the range of unsigned int, its type is
unsigned int. This results in the constant 48 being of type int. In the
following min call,
g_phys_as = min(g_phys_as, 48);
This leads to a building warning/error (CONFIG_KVM_WERROR=y) caused by
the mismatch between the types of the two arguments to macro min. By
adding the suffix U to explicitly declare the type of the constant, this
issue is fixed.
Signed-off-by: Ethan Zhao <haifeng.zhao@linux.intel.com>
Link: https://lore.kernel.org/r/20250127013837.12983-1-haifeng.zhao@linux.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
SYNTHESIZED_F() generally is used together with setup_force_cpu_cap(),
i.e. when it makes sense to present the feature even if cpuid does not
have it *and* the VM is not able to see the difference. For example,
it can be used when mitigations on the host automatically protect
the guest as well.
The "SYNTHESIZED_F(SRSO_USER_KERNEL_NO)" line came in as a conflict
resolution between the CPUID overhaul from the KVM tree and support
for the feature in the x86 tree. Using it right now does not hurt,
or make a difference for that matter, because there is no
setup_force_cpu_cap(X86_FEATURE_SRSO_USER_KERNEL_NO). However, it
is a little less future proof in case such a setup_force_cpu_cap()
appears later, for a case where the kernel somehow is not vulnerable
but the guest would have to apply the mitigation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull kvm updates from Paolo Bonzini:
"Loongarch:
- Clear LLBCTL if secondary mmu mapping changes
- Add hypercall service support for usermode VMM
x86:
- Add a comment to kvm_mmu_do_page_fault() to explain why KVM
performs a direct call to kvm_tdp_page_fault() when RETPOLINE is
enabled
- Ensure that all SEV code is compiled out when disabled in Kconfig,
even if building with less brilliant compilers
- Remove a redundant TLB flush on AMD processors when guest CR4.PGE
changes
- Use str_enabled_disabled() to replace open coded strings
- Drop kvm_x86_ops.hwapic_irr_update() as KVM updates hardware's
APICv cache prior to every VM-Enter
- Overhaul KVM's CPUID feature infrastructure to track all vCPU
capabilities instead of just those where KVM needs to manage state
and/or explicitly enable the feature in hardware. Along the way,
refactor the code to make it easier to add features, and to make it
more self-documenting how KVM is handling each feature
- Rework KVM's handling of VM-Exits during event vectoring; this
plugs holes where KVM unintentionally puts the vCPU into infinite
loops in some scenarios (e.g. if emulation is triggered by the
exit), and brings parity between VMX and SVM
- Add pending request and interrupt injection information to the
kvm_exit and kvm_entry tracepoints respectively
- Fix a relatively benign flaw where KVM would end up redoing RDPKRU
when loading guest/host PKRU, due to a refactoring of the kernel
helpers that didn't account for KVM's pre-checking of the need to
do WRPKRU
- Make the completion of hypercalls go through the complete_hypercall
function pointer argument, no matter if the hypercall exits to
userspace or not.
Previously, the code assumed that KVM_HC_MAP_GPA_RANGE specifically
went to userspace, and all the others did not; the new code need
not special case KVM_HC_MAP_GPA_RANGE and in fact does not care at
all whether there was an exit to userspace or not
- As part of enabling TDX virtual machines, support support
separation of private/shared EPT into separate roots.
When TDX will be enabled, operations on private pages will need to
go through the privileged TDX Module via SEAMCALLs; as a result,
they are limited and relatively slow compared to reading a PTE.
The patches included in 6.14 allow KVM to keep a mirror of the
private EPT in host memory, and define entries in kvm_x86_ops to
operate on external page tables such as the TDX private EPT
- The recently introduced conversion of the NX-page reclamation
kthread to vhost_task moved the task under the main process. The
task is created as soon as KVM_CREATE_VM was invoked and this, of
course, broke userspace that didn't expect to see any child task of
the VM process until it started creating its own userspace threads.
In particular crosvm refuses to fork() if procfs shows any child
task, so unbreak it by creating the task lazily. This is arguably a
userspace bug, as there can be other kinds of legitimate worker
tasks and they wouldn't impede fork(); but it's not like userspace
has a way to distinguish kernel worker tasks right now. Should they
show as "Kthread: 1" in proc/.../status?
x86 - Intel:
- Fix a bug where KVM updates hardware's APICv cache of the highest
ISR bit while L2 is active, while ultimately results in a
hardware-accelerated L1 EOI effectively being lost
- Honor event priority when emulating Posted Interrupt delivery
during nested VM-Enter by queueing KVM_REQ_EVENT instead of
immediately handling the interrupt
- Rework KVM's processing of the Page-Modification Logging buffer to
reap entries in the same order they were created, i.e. to mark gfns
dirty in the same order that hardware marked the page/PTE dirty
- Misc cleanups
Generic:
- Cleanup and harden kvm_set_memory_region(); add proper lockdep
assertions when setting memory regions and add a dedicated API for
setting KVM-internal memory regions. The API can then explicitly
disallow all flags for KVM-internal memory regions
- Explicitly verify the target vCPU is online in kvm_get_vcpu() to
fix a bug where KVM would return a pointer to a vCPU prior to it
being fully online, and give kvm_for_each_vcpu() similar treatment
to fix a similar flaw
- Wait for a vCPU to come online prior to executing a vCPU ioctl, to
fix a bug where userspace could coerce KVM into handling the ioctl
on a vCPU that isn't yet onlined
- Gracefully handle xarray insertion failures; even though such
failures are impossible in practice after xa_reserve(), reserving
an entry is always followed by xa_store() which does not know (or
differentiate) whether there was an xa_reserve() before or not
RISC-V:
- Zabha, Svvptc, and Ziccrse extension support for guests. None of
them require anything in KVM except for detecting them and marking
them as supported; Zabha adds byte and halfword atomic operations,
while the others are markers for specific operation of the TLB and
of LL/SC instructions respectively
- Virtualize SBI system suspend extension for Guest/VM
- Support firmware counters which can be used by the guests to
collect statistics about traps that occur in the host
Selftests:
- Rework vcpu_get_reg() to return a value instead of using an
out-param, and update all affected arch code accordingly
- Convert the max_guest_memory_test into a more generic
mmu_stress_test. The basic gist of the "conversion" is to have the
test do mprotect() on guest memory while vCPUs are accessing said
memory, e.g. to verify KVM and mmu_notifiers are working as
intended
- Play nice with treewrite builds of unsupported architectures, e.g.
arm (32-bit), as KVM selftests' Makefile doesn't do anything to
ensure the target architecture is actually one KVM selftests
supports
- Use the kernel's $(ARCH) definition instead of the target triple
for arch specific directories, e.g. arm64 instead of aarch64,
mainly so as not to be different from the rest of the kernel
- Ensure that format strings for logging statements are checked by
the compiler even when the logging statement itself is disabled
- Attempt to whack the last LLC references/misses mole in the Intel
PMU counters test by adding a data load and doing CLFLUSH{OPT} on
the data instead of the code being executed. It seems that modern
Intel CPUs have learned new code prefetching tricks that bypass the
PMU counters
- Fix a flaw in the Intel PMU counters test where it asserts that
events are counting correctly without actually knowing what the
events count given the underlying hardware; this can happen if
Intel reuses a formerly microarchitecture-specific event encoding
as an architectural event, as was the case for Top-Down Slots"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (151 commits)
kvm: defer huge page recovery vhost task to later
KVM: x86/mmu: Return RET_PF* instead of 1 in kvm_mmu_page_fault()
KVM: Disallow all flags for KVM-internal memslots
KVM: x86: Drop double-underscores from __kvm_set_memory_region()
KVM: Add a dedicated API for setting KVM-internal memslots
KVM: Assert slots_lock is held when setting memory regions
KVM: Open code kvm_set_memory_region() into its sole caller (ioctl() API)
LoongArch: KVM: Add hypercall service support for usermode VMM
LoongArch: KVM: Clear LLBCTL if secondary mmu mapping is changed
KVM: SVM: Use str_enabled_disabled() helper in svm_hardware_setup()
KVM: VMX: read the PML log in the same order as it was written
KVM: VMX: refactor PML terminology
KVM: VMX: Fix comment of handle_vmx_instruction()
KVM: VMX: Reinstate __exit attribute for vmx_exit()
KVM: SVM: Use str_enabled_disabled() helper in sev_hardware_setup()
KVM: x86: Avoid double RDPKRU when loading host/guest PKRU
KVM: x86: Use LVT_TIMER instead of an open coded literal
RISC-V: KVM: Add new exit statstics for redirected traps
RISC-V: KVM: Update firmware counters for various events
RISC-V: KVM: Redirect instruction access fault trap to guest
...
|
|
SRSO_USER_KERNEL_NO denotes whether the CPU is affected by SRSO across
user/kernel boundaries. Advertise it to guest userspace.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20241202120416.6054-3-bp@kernel.org
|
|
Refactor the kvm_cpu_cap_init() macro magic to collect supported features
in a local variable instead of passing them to the macro as a "mask". As
pointed out by Maxim, relying on macros to "return" a value and set local
variables is surprising, as the bitwise-OR logic suggests the macros are
pure, i.e. have no side effects.
Ideally, the feature initializers would have zero side effects, e.g. would
take local variables as params, but there isn't a sane way to do so
without either sacrificing the various compile-time assertions (basically
a non-starter), or passing at least one variable, e.g. a struct, to each
macro usage (adds a lot of noise and boilerplate code).
Opportunistically force callers to emit a trailing comma by intentionally
omitting a semicolon after invoking the feature initializers. Forcing a
trailing comma isotales futures changes to a single line, i.e. doesn't
cause churn for unrelated features/lines when adding/removing/modifying a
feature.
No functional change intended.
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-58-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add one last (hopefully) CPUID feature macro, RUNTIME_F(), and use it
to track features that KVM supports, but that are only set at runtime
(in response to other state), and aren't advertised to userspace via
KVM_GET_SUPPORTED_CPUID.
Currently, RUNTIME_F() is mostly just documentation, but tracking all
KVM-supported features will allow for asserting, at build time, take),
that all features that are set, cleared, *or* checked by KVM are known to
kvm_set_cpu_caps().
No functional change intended.
Link: https://lore.kernel.org/r/20241128013424.4096668-57-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add another CPUID feature macro, VENDOR_F(), and use it to track features
that KVM supports, but that need additional vendor support and so are
conditionally enabled in vendor code.
Currently, VENDOR_F() is mostly just documentation, but tracking all
KVM-supported features will allow for asserting, at build time, take),
that all features that are set, cleared, *or* checked by KVM are known to
kvm_set_cpu_caps().
To fudge around a macro collision on 32-bit kernels, #undef DS to be able
to get at X86_FEATURE_DS.
No functional change intended.
Link: https://lore.kernel.org/r/20241128013424.4096668-56-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that each feature flag is on its own line, i.e. brevity isn't a major
concern, drop the "SF" acronym and use the (almost) full name, SCATTERED_F.
No functional change intended.
Link: https://lore.kernel.org/r/20241128013424.4096668-55-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Don't memcpy() all of boot_cpu_data.x86_capability, and instead explicitly
fill each kvm_cpu_cap_init leaf during kvm_cpu_cap_init(). While clever,
copying all kernel capabilities risks over-reporting KVM capabilities,
e.g. if KVM added support in __do_cpuid_func(), but neglected to init the
supported set of capabilities.
Note, explicitly grabbing leafs deliberately keeps Linux-defined leafs as
0! KVM should never advertise Linux-defined leafs; any relevant features
that are "real", but scattered, must be gathered in their correct hardware-
defined leaf.
Link: https://lore.kernel.org/r/20241128013424.4096668-54-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add yet another CPUID macro, this time for features that the host kernel
synthesizes into boot_cpu_data, i.e. that the kernel force sets even in
situations where the feature isn't reported by CPUID. Thanks to the
macro shenanigans of kvm_cpu_cap_init(), such features can now be handled
in the core CPUID framework, i.e. don't need to be handled out-of-band and
thus without as many guardrails.
Adding a dedicated macro also helps document what's going on, e.g. the
calls to kvm_cpu_cap_check_and_set() are very confusing unless the reader
knows exactly how kvm_cpu_cap_init() generates kvm_cpu_caps (and even
then, it's far from obvious).
Link: https://lore.kernel.org/r/20241128013424.4096668-53-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Switch all queries (except XSAVES) of guest features from guest CPUID to
guest capabilities, i.e. replace all calls to guest_cpuid_has() with calls
to guest_cpu_cap_has().
Keep guest_cpuid_has() around for XSAVES, but subsume its helper
guest_cpuid_get_register() and add a compile-time assertion to prevent
using guest_cpuid_has() for any other feature. Add yet another comment
for XSAVE to explain why KVM is allowed to query its raw guest CPUID.
Opportunistically drop the unused guest_cpuid_clear(), as there should be
no circumstance in which KVM needs to _clear_ a guest CPUID feature now
that everything is tracked via cpu_caps. E.g. KVM may need to _change_
a feature to emulate dynamic CPUID flags, but KVM should never need to
clear a feature in guest CPUID to prevent it from being used by the guest.
Delete the last remnants of the governed features framework, as the lone
holdout was vmx_adjust_secondary_exec_control()'s divergent behavior for
governed vs. ungoverned features.
Note, replacing guest_cpuid_has() checks with guest_cpu_cap_has() when
computing reserved CR4 bits is a nop when viewed as a whole, as KVM's
capabilities are already incorporated into the calculation, i.e. if a
feature is present in guest CPUID but unsupported by KVM, its CR4 bit
was already being marked as reserved, checking guest_cpu_cap_has() simply
double-stamps that it's a reserved bit.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-51-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When updating guest CPUID entries to emulate runtime behavior, e.g. when
the guest enables a CR4-based feature that is tied to a CPUID flag, also
update the vCPU's cpu_caps accordingly. This will allow replacing all
usage of guest_cpuid_has() with guest_cpu_cap_has().
Note, this relies on kvm_set_cpuid() taking a snapshot of cpu_caps before
invoking kvm_update_cpuid_runtime(), i.e. when KVM is updating CPUID
entries that *may* become the vCPU's CPUID, so that unwinding to the old
cpu_caps is possible if userspace tries to set bogus CPUID information.
Note #2, none of the features in question use guest_cpu_cap_has() at this
time, i.e. aside from settings bits in cpu_caps, this is a glorified nop.
Cc: Yang Weijiang <weijiang.yang@intel.com>
Cc: Robert Hoo <robert.hoo.linux@gmail.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-49-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When making runtime CPUID updates, change OSXSAVE and OSPKE even if their
respective base features (XSAVE, PKU) are not supported by the host. KVM
already incorporates host support in the vCPU's effective reserved CR4 bits.
I.e. OSXSAVE and OSPKE can be set if and only if the host supports them.
And conversely, since KVM's ABI is that KVM owns the dynamic OS feature
flags, clearing them when they obviously aren't supported and thus can't
be enabled is arguably a fix.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-48-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Drop an unnecessary check that kvm_find_cpuid_entry_index(), i.e.
cpuid_entry2_find(), returns the correct leaf when getting CPUID.0x7.0x0
to update X86_FEATURE_OSPKE. cpuid_entry2_find() never returns an entry
for the wrong function. And not that it matters, but cpuid_entry2_find()
will always return a precise match for CPUID.0x7.0x0 since the index is
significant.
No functional change intended.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-47-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Move the handling of X86_FEATURE_MWAIT during CPUID runtime updates to
utilize the lookup done for other CPUID.0x1 features.
No functional change intended.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-46-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Constrain all guest cpu_caps based on KVM support instead of constraining
only the few features that KVM _currently_ needs to verify are actually
supported by KVM. The intent of cpu_caps is to track what the guest is
actually capable of using, not the raw, unfiltered CPUID values that the
guest sees.
I.e. KVM should always consult it's only support when making decisions
based on guest CPUID, and the only reason KVM has historically made the
checks opt-in was due to lack of centralized tracking.
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-45-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Enumerate MWAIT in cpuid_func_emulated(), but only if the caller wants to
include "partially emulated" features, i.e. features that KVM kinda sorta
emulates, but with major caveats. This will allow initializing the guest
cpu_caps based on the set of features that KVM virtualizes and/or emulates,
without needing to handle things like MONITOR/MWAIT as one-off exceptions.
Adding one-off handling for individual features is quite painful,
especially when considering future hardening. It's very doable to verify,
at compile time, that every CPUID-based feature that KVM queries when
emulating guest behavior is actually known to KVM, e.g. to prevent KVM
bugs where KVM emulates some feature but fails to advertise support to
userspace. In other words, any features that are special cased, i.e. not
handled generically in the CPUID framework, would also need to be special
cased for any hardening efforts that build on said framework.
Link: https://lore.kernel.org/r/20241128013424.4096668-44-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Extract the meat of __do_cpuid_func_emulated() into a separate helper,
cpuid_func_emulated(), so that cpuid_func_emulated() can be used with a
single CPUID entry. This will allow marking emulated features as fully
supported in the guest cpu_caps without needing to hardcode the set of
emulated features in multiple locations.
No functional change intended.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-43-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Initialize a vCPU's capabilities based on the guest CPUID provided by
userspace instead of simply zeroing the entire array. This is the first
step toward using cpu_caps to query *all* CPUID-based guest capabilities,
i.e. will allow converting all usage of guest_cpuid_has() to
guest_cpu_cap_has().
Zeroing the array was the logical choice when using cpu_caps was opt-in,
e.g. "unsupported" was generally a safer default, and the whole point of
governed features is that KVM would need to check host and guest support,
i.e. making everything unsupported by default didn't require more code.
But requiring KVM to manually "enable" every CPUID-based feature in
cpu_caps would require an absurd amount of boilerplate code.
Follow existing CPUID/kvm_cpu_caps nomenclature where possible, e.g. for
the change() and clear() APIs. Replace check_and_set() with constrain()
to try and capture that KVM is constraining userspace's desired guest
feature set based on KVM's capabilities.
This is intended to be gigantic nop, i.e. should not have any impact on
guest or KVM functionality.
This is also an intermediate step; a future commit will also incorporate
KVM support into the vCPU's cpu_caps before converting guest_cpuid_has()
to guest_cpu_cap_has().
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-42-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Replace the internals of the governed features framework with a more
comprehensive "guest CPU capabilities" implementation, i.e. with a guest
version of kvm_cpu_caps. Keep the skeleton of governed features around
for now as vmx_adjust_sec_exec_control() relies on detecting governed
features to do the right thing for XSAVES, and switching all guest feature
queries to guest_cpu_cap_has() requires subtle and non-trivial changes,
i.e. is best done as a standalone change.
Tracking *all* guest capabilities that KVM cares will allow excising the
poorly named "governed features" framework, and effectively optimizes all
KVM queries of guest capabilities, i.e. doesn't require making a
subjective decision as to whether or not a feature is worth "governing",
and doesn't require adding the code to do so.
The cost of tracking all features is currently 92 bytes per vCPU on 64-bit
kernels: 100 bytes for cpu_caps versus 8 bytes for governed_features.
That cost is well worth paying even if the only benefit was eliminating
the "governed features" terminology. And practically speaking, the real
cost is zero unless those 92 bytes pushes the size of vcpu_vmx or vcpu_svm
into a new order-N allocation, and if that happens there are better ways
to reduce the footprint of kvm_vcpu_arch, e.g. making the PMU and/or MTRR
state separate allocations.
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-41-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
As the first step toward replacing KVM's so-called "governed features"
framework with a more comprehensive, less poorly named implementation,
replace the "kvm_governed_feature" function prefix with "guest_cpu_cap"
and rename guest_can_use() to guest_cpu_cap_has().
The "guest_cpu_cap" naming scheme mirrors that of "kvm_cpu_cap", and
provides a more clear distinction between guest capabilities, which are
KVM controlled (heh, or one might say "governed"), and guest CPUID, which
with few exceptions is fully userspace controlled.
Opportunistically rewrite the comment about XSS passthrough for SEV-ES
guests to avoid referencing so many functions, as such comments are prone
to becoming stale (case in point...).
No functional change intended.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-40-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Unconditionally advertise "support" for the HYPERVISOR feature in CPUID,
as the flag simply communicates to the guest that's it's running under a
hypervisor.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-39-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Unconditionally advertise TSC_DEADLINE_TIMER via KVM_GET_SUPPORTED_CPUID,
as KVM always emulates deadline mode, *if* the VM has an in-kernel local
APIC. The odds of a VMM emulating the local APIC in userspace, not
emulating the TSC deadline timer, _and_ reflecting
KVM_GET_SUPPORTED_CPUID back into KVM_SET_CPUID2, i.e. the risk of
over-advertising and breaking any setups, is extremely low.
KVM has _unconditionally_ advertised X2APIC via CPUID since commit
0d1de2d901f4 ("KVM: Always report x2apic as supported feature"), and it
is completely impossible for userspace to emulate X2APIC as KVM doesn't
support forwarding the MSR accesses to userspace. I.e. KVM has relied on
userspace VMMs to not misreport local APIC capabilities for nearly 13
years.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-38-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Convert all use of cpuid_entry2_find() to kvm_find_cpuid_entry{,index}()
now that cpuid_entry2_find() operates on the vCPU state, i.e. now that
there is no need to use cpuid_entry2_find() directly in order to pass in
non-vCPU state.
To help prevent unwanted usage of cpuid_entry2_find(), #undef
KVM_CPUID_INDEX_NOT_SIGNIFICANT, i.e. force KVM to use
kvm_find_cpuid_entry().
No functional change intended.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-37-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Move kvm_find_cpuid_entry{,_index}() "up" in cpuid.c so that they are
colocated with cpuid_entry2_find(), e.g. to make it easier to see the
effective guts of the helpers without having to bounce around cpuid.c.
No functional change intended.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-36-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that KVM sets vcpu->arch.cpuid_{entries,nent} before processing the
incoming CPUID entries during KVM_SET_CPUID{,2}, drop the @entries and
@nent params from cpuid_entry2_find() and unconditionally operate on the
vCPU state.
No functional change intended.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-35-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that KVM only searches for KVM's PV CPUID base when userspace sets
guest CPUID, drop the cache and simply do the search every time.
Practically speaking, this is a nop except for situations where userspace
sets CPUID _after_ running the vCPU, which is anything but a hot path,
e.g. QEMU does so only when hotplugging a vCPU. And on the flip side,
caching guest CPUID information, especially information that is used to
query/modify _other_ CPUID state, is inherently dangerous as it's all too
easy to use stale information, i.e. KVM should only cache CPUID state when
the performance and/or programming benefits justify it.
Link: https://lore.kernel.org/r/20241128013424.4096668-34-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
