| Age | Commit message (Collapse) | Author |
|---|
|
Move some of the logic of hv_irq_compose_irq_message() into
hv_map_msi_interrupt(). Make hv_map_msi_interrupt() a globally-available
helper function, which will be used to map PCI interrupts when running
in the root partition.
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1752261532-7225-3-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1752261532-7225-3-git-send-email-nunodasneves@linux.microsoft.com>
|
|
When running nested, these hypercalls must be sent to the L0 hypervisor
or VMBus will fail.
Remove hv_do_nested_hypercall() and hv_do_fast_nested_hypercall8()
altogether and open-code these cases, since there are only 2 and all
they do is add the nested bit.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1752261532-7225-2-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1752261532-7225-2-git-send-email-nunodasneves@linux.microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Support for Virtual Trust Level (VTL) on arm64 (Roman Kisel)
- Fixes for Hyper-V UIO driver (Long Li)
- Fixes for Hyper-V PCI driver (Michael Kelley)
- Select CONFIG_SYSFB for Hyper-V guests (Michael Kelley)
- Documentation updates for Hyper-V VMBus (Michael Kelley)
- Enhance logging for hv_kvp_daemon (Shradha Gupta)
* tag 'hyperv-next-signed-20250602' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (23 commits)
Drivers: hv: Always select CONFIG_SYSFB for Hyper-V guests
Drivers: hv: vmbus: Add comments about races with "channels" sysfs dir
Documentation: hyperv: Update VMBus doc with new features and info
PCI: hv: Remove unnecessary flex array in struct pci_packet
Drivers: hv: Remove hv_alloc/free_* helpers
Drivers: hv: Use kzalloc for panic page allocation
uio_hv_generic: Align ring size to system page
uio_hv_generic: Use correct size for interrupt and monitor pages
Drivers: hv: Allocate interrupt and monitor pages aligned to system page boundary
arch/x86: Provide the CPU number in the wakeup AP callback
x86/hyperv: Fix APIC ID and VP index confusion in hv_snp_boot_ap()
PCI: hv: Get vPCI MSI IRQ domain from DeviceTree
ACPI: irq: Introduce acpi_get_gsi_dispatcher()
Drivers: hv: vmbus: Introduce hv_get_vmbus_root_device()
Drivers: hv: vmbus: Get the IRQ number from DeviceTree
dt-bindings: microsoft,vmbus: Add interrupt and DMA coherence properties
arm64, x86: hyperv: Report the VTL the system boots in
arm64: hyperv: Initialize the Virtual Trust Level field
Drivers: hv: Provide arch-neutral implementation of get_vtl()
Drivers: hv: Enable VTL mode for arm64
...
|
|
When starting APs, confidential guests and paravisor guests
need to know the CPU number, and the pattern of using the linear
search has emerged in several places. With N processors that leads
to the O(N^2) time complexity.
Provide the CPU number in the AP wake up callback so that one can
get the CPU number in constant time.
Suggested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20250507182227.7421-3-romank@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250507182227.7421-3-romank@linux.microsoft.com>
|
|
To start an application processor in SNP-isolated guest, a hypercall
is used that takes a virtual processor index. The hv_snp_boot_ap()
function uses that START_VP hypercall but passes as VP index to it
what it receives as a wakeup_secondary_cpu_64 callback: the APIC ID.
As those two aren't generally interchangeable, that may lead to hung
APs if the VP index and the APIC ID don't match up.
Update the parameter names to avoid confusion as to what the parameter
is. Use the APIC ID to the VP index conversion to provide the correct
input to the hypercall.
Cc: stable@vger.kernel.org
Fixes: 44676bb9d566 ("x86/hyperv: Add smp support for SEV-SNP guest")
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20250507182227.7421-2-romank@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250507182227.7421-2-romank@linux.microsoft.com>
|
|
__rdmsr() is the lowest level MSR write API, with native_rdmsr()
and native_rdmsrq() serving as higher-level wrappers around it.
#define native_rdmsr(msr, val1, val2) \
do { \
u64 __val = __rdmsr((msr)); \
(void)((val1) = (u32)__val); \
(void)((val2) = (u32)(__val >> 32)); \
} while (0)
static __always_inline u64 native_rdmsrq(u32 msr)
{
return __rdmsr(msr);
}
However, __rdmsr() continues to be utilized in various locations.
MSR APIs are designed for different scenarios, such as native or
pvops, with or without trace, and safe or non-safe. Unfortunately,
the current MSR API names do not adequately reflect these factors,
making it challenging to select the most appropriate API for
various situations.
To pave the way for improving MSR API names, convert __rdmsr()
uses to native_rdmsrq() to ensure consistent usage. Later, these
APIs can be renamed to better reflect their implications, such as
native or pvops, with or without trace, and safe or non-safe.
No functional change intended.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-10-xin@zytor.com
|
|
For historic reasons there are some TSC-related functions in the
<asm/msr.h> header, even though there's an <asm/tsc.h> header.
To facilitate the relocation of rdtsc{,_ordered}() from <asm/msr.h>
to <asm/tsc.h> and to eventually eliminate the inclusion of
<asm/msr.h> in <asm/tsc.h>, add an explicit <asm/msr.h> dependency
to the source files that reference definitions from <asm/msr.h>.
[ mingo: Clarified the changelog. ]
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250501054241.1245648-1-xin@zytor.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Add support for running as the root partition in Hyper-V (Microsoft
Hypervisor) by exposing /dev/mshv (Nuno and various people)
- Add support for CPU offlining in Hyper-V (Hamza Mahfooz)
- Misc fixes and cleanups (Roman Kisel, Tianyu Lan, Wei Liu, Michael
Kelley, Thorsten Blum)
* tag 'hyperv-next-signed-20250324' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (24 commits)
x86/hyperv: fix an indentation issue in mshyperv.h
x86/hyperv: Add comments about hv_vpset and var size hypercall input args
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs
hyperv: Add definitions for root partition driver to hv headers
x86: hyperv: Add mshv_handler() irq handler and setup function
Drivers: hv: Introduce per-cpu event ring tail
Drivers: hv: Export some functions for use by root partition module
acpi: numa: Export node_to_pxm()
hyperv: Introduce hv_recommend_using_aeoi()
arm64/hyperv: Add some missing functions to arm64
x86/mshyperv: Add support for extended Hyper-V features
hyperv: Log hypercall status codes as strings
x86/hyperv: Fix check of return value from snp_set_vmsa()
x86/hyperv: Add VTL mode callback for restarting the system
x86/hyperv: Add VTL mode emergency restart callback
hyperv: Remove unused union and structs
hyperv: Add CONFIG_MSHV_ROOT to gate root partition support
hyperv: Change hv_root_partition into a function
hyperv: Convert hypercall statuses to linux error codes
drivers/hv: add CPU offlining support
...
|
|
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503220640.hjiacW2C-lkp@intel.com/
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Use named operands in inline asm to make it easier to change the
constraint order.
Do this in preparation of changing the ASM_CALL_CONSTRAINT primitive.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: linux-kernel@vger.kernel.org
|
|
These helpers are not specific to x86_64 and will be needed by common code.
Remove some unnecessary #includes.
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Link: https://lore.kernel.org/r/1738955002-20821-3-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1738955002-20821-3-git-send-email-nunodasneves@linux.microsoft.com>
|
|
Move hv_current_partition_id and hv_get_partition_id() to hv_common.c,
and call hv_get_partition_id() on arm64 in hyperv_init(). These aren't
specific to x86_64 and will be needed by common code.
Set hv_current_partition_id to HV_PARTITION_ID_SELF by default.
Rename struct hv_get_partition_id to hv_output_get_partition_id, to
make it distinct from the function hv_get_partition_id(), and match
the original Hyper-V struct name.
Remove the BUG()s. Failing to get the id need not crash the machine.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1738955002-20821-2-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1738955002-20821-2-git-send-email-nunodasneves@linux.microsoft.com>
|
|
Switch to using hvhdk.h everywhere in the kernel. This header
includes all the new Hyper-V headers in include/hyperv, which form a
superset of the definitions found in hyperv-tlfs.h.
This makes it easier to add new Hyper-V interfaces without being
restricted to those in the TLFS doc (reflected in hyperv-tlfs.h).
To be more consistent with the original Hyper-V code, the names of
some definitions are changed slightly. Update those where needed.
Update comments in mshyperv.h files to point to include/hyperv for
adding new definitions.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Link: https://lore.kernel.org/r/1732577084-2122-5-git-send-email-nunodasneves@linux.microsoft.com
Link: https://lore.kernel.org/r/20250108222138.1623703-3-romank@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Remove includes of linux/hyperv.h, mshyperv.h, and hyperv-tlfs.h where
they are not used.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Link: https://lore.kernel.org/r/1732577084-2122-3-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1732577084-2122-3-git-send-email-nunodasneves@linux.microsoft.com>
|
|
commit 9636be85cc5b ("x86/hyperv: Fix hyperv_pcpu_input_arg handling when
CPUs go online/offline") introduces a new cpuhp state for hyperv
initialization.
cpuhp_setup_state() returns the state number if state is
CPUHP_AP_ONLINE_DYN or CPUHP_BP_PREPARE_DYN and 0 for all other states.
For the hyperv case, since a new cpuhp state was introduced it would
return 0. However, in hv_machine_shutdown(), the cpuhp_remove_state() call
is conditioned upon "hyperv_init_cpuhp > 0". This will never be true and
so hv_cpu_die() won't be called on all CPUs. This means the VP assist page
won't be reset. When the kexec kernel tries to setup the VP assist page
again, the hypervisor corrupts the memory region of the old VP assist page
causing a panic in case the kexec kernel is using that memory elsewhere.
This was originally fixed in commit dfe94d4086e4 ("x86/hyperv: Fix kexec
panic/hang issues").
Get rid of hyperv_init_cpuhp entirely since we are no longer using a
dynamic cpuhp state and use CPUHP_AP_HYPERV_ONLINE directly with
cpuhp_remove_state().
Cc: stable@vger.kernel.org
Fixes: 9636be85cc5b ("x86/hyperv: Fix hyperv_pcpu_input_arg handling when CPUs go online/offline")
Signed-off-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20240828112158.3538342-1-anirudh@anirudhrb.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240828112158.3538342-1-anirudh@anirudhrb.com>
|
|
The HV_REGISTER_ are used as arguments to hv_set/get_register(), which
delegate to arch-specific mechanisms for getting/setting synthetic
Hyper-V MSRs.
On arm64, HV_REGISTER_ defines are synthetic VP registers accessed via
the get/set vp registers hypercalls. The naming matches the TLFS
document, although these register names are not specific to arm64.
However, on x86 the prefix HV_REGISTER_ indicates Hyper-V MSRs accessed
via rdmsrl()/wrmsrl(). This is not consistent with the TLFS doc, where
HV_REGISTER_ is *only* used for used for VP register names used by
the get/set register hypercalls.
To fix this inconsistency and prevent future confusion, change the
arch-generic aliases used by callers of hv_set/get_register() to have
the prefix HV_MSR_ instead of HV_REGISTER_.
Use the prefix HV_X64_MSR_ for the x86-only Hyper-V MSRs. On x86, the
generic HV_MSR_'s point to the corresponding HV_X64_MSR_.
Move the arm64 HV_REGISTER_* defines to the asm-generic hyperv-tlfs.h,
since these are not specific to arm64. On arm64, the generic HV_MSR_'s
point to the corresponding HV_REGISTER_.
While at it, rename hv_get/set_registers() and related functions to
hv_get/set_msr(), hv_get/set_nested_msr(), etc. These are only used for
Hyper-V MSRs and this naming makes that clear.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1708440933-27125-1-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1708440933-27125-1-git-send-email-nunodasneves@linux.microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Thomas Gleixner:
- Limit the hardcoded topology quirk for Hygon CPUs to those which have
a model ID less than 4.
The newer models have the topology CPUID leaf 0xB correctly
implemented and are not affected.
- Make SMT control more robust against enumeration failures
SMT control was added to allow controlling SMT at boottime or
runtime. The primary purpose was to provide a simple mechanism to
disable SMT in the light of speculation attack vectors.
It turned out that the code is sensible to enumeration failures and
worked only by chance for XEN/PV. XEN/PV has no real APIC enumeration
which means the primary thread mask is not set up correctly. By
chance a XEN/PV boot ends up with smp_num_siblings == 2, which makes
the hotplug control stay at its default value "enabled". So the mask
is never evaluated.
The ongoing rework of the topology evaluation caused XEN/PV to end up
with smp_num_siblings == 1, which sets the SMT control to "not
supported" and the empty primary thread mask causes the hotplug core
to deny the bringup of the APS.
Make the decision logic more robust and take 'not supported' and 'not
implemented' into account for the decision whether a CPU should be
booted or not.
- Fake primary thread mask for XEN/PV
Pretend that all XEN/PV vCPUs are primary threads, which makes the
usage of the primary thread mask valid on XEN/PV. That is consistent
with because all of the topology information on XEN/PV is fake or
even non-existent.
- Encapsulate topology information in cpuinfo_x86
Move the randomly scattered topology data into a separate data
structure for readability and as a preparatory step for the topology
evaluation overhaul.
- Consolidate APIC ID data type to u32
It's fixed width hardware data and not randomly u16, int, unsigned
long or whatever developers decided to use.
- Cure the abuse of cpuinfo for persisting logical IDs.
Per CPU cpuinfo is used to persist the logical package and die IDs.
That's really not the right place simply because cpuinfo is subject
to be reinitialized when a CPU goes through an offline/online cycle.
Use separate per CPU data for the persisting to enable the further
topology management rework. It will be removed once the new topology
management is in place.
- Provide a debug interface for inspecting topology information
Useful in general and extremly helpful for validating the topology
management rework in terms of correctness or "bug" compatibility.
* tag 'x86-core-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/apic, x86/hyperv: Use u32 in hv_snp_boot_ap() too
x86/cpu: Provide debug interface
x86/cpu/topology: Cure the abuse of cpuinfo for persisting logical ids
x86/apic: Use u32 for wakeup_secondary_cpu[_64]()
x86/apic: Use u32 for [gs]et_apic_id()
x86/apic: Use u32 for phys_pkg_id()
x86/apic: Use u32 for cpu_present_to_apicid()
x86/apic: Use u32 for check_apicid_used()
x86/apic: Use u32 for APIC IDs in global data
x86/apic: Use BAD_APICID consistently
x86/cpu: Move cpu_l[l2]c_id into topology info
x86/cpu: Move logical package and die IDs into topology info
x86/cpu: Remove pointless evaluation of x86_coreid_bits
x86/cpu: Move cu_id into topology info
x86/cpu: Move cpu_core_id into topology info
hwmon: (fam15h_power) Use topology_core_id()
scsi: lpfc: Use topology_core_id()
x86/cpu: Move cpu_die_id into topology info
x86/cpu: Move phys_proc_id into topology info
x86/cpu: Encapsulate topology information in cpuinfo_x86
...
|
|
The data type for APIC IDs was standardized to 'u32' in the
following recent commit:
db4a4086a223 ("x86/apic: Use u32 for wakeup_secondary_cpu[_64]()")
Which changed the function arguments type signature of the
apic->wakeup_secondary_cpu() APIC driver function.
Propagate this to hv_snp_boot_ap() as well, which also addresses a
'assignment from incompatible pointer type' build warning that triggers
under the -Werror=incompatible-pointer-types GCC warning.
Fixes: db4a4086a223 ("x86/apic: Use u32 for wakeup_secondary_cpu[_64]()")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230814085113.233274223@linutronix.de
|
|
There has been cases reported where HYPERV_VTL_MODE is enabled by mistake,
on a non Hyper-V platforms. This causes the hv_vtl_early_init function to
be called in an non Hyper-V/VTL platforms which results the memory
corruption.
Remove the early_initcall for hv_vtl_early_init and call it at the end of
hyperv_init to make sure it is never called in a non Hyper-V platform by
mistake.
Reported-by: Mathias Krause <minipli@grsecurity.net>
Closes: https://lore.kernel.org/lkml/40467722-f4ab-19a5-4989-308225b1f9f0@grsecurity.net/
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Acked-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/1695358720-27681-1-git-send-email-ssengar@linux.microsoft.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Support for SEV-SNP guests on Hyper-V (Tianyu Lan)
- Support for TDX guests on Hyper-V (Dexuan Cui)
- Use SBRM API in Hyper-V balloon driver (Mitchell Levy)
- Avoid dereferencing ACPI root object handle in VMBus driver (Maciej
Szmigiero)
- A few misecllaneous fixes (Jiapeng Chong, Nathan Chancellor, Saurabh
Sengar)
* tag 'hyperv-next-signed-20230902' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (24 commits)
x86/hyperv: Remove duplicate include
x86/hyperv: Move the code in ivm.c around to avoid unnecessary ifdef's
x86/hyperv: Remove hv_isolation_type_en_snp
x86/hyperv: Use TDX GHCI to access some MSRs in a TDX VM with the paravisor
Drivers: hv: vmbus: Bring the post_msg_page back for TDX VMs with the paravisor
x86/hyperv: Introduce a global variable hyperv_paravisor_present
Drivers: hv: vmbus: Support >64 VPs for a fully enlightened TDX/SNP VM
x86/hyperv: Fix serial console interrupts for fully enlightened TDX guests
Drivers: hv: vmbus: Support fully enlightened TDX guests
x86/hyperv: Support hypercalls for fully enlightened TDX guests
x86/hyperv: Add hv_isolation_type_tdx() to detect TDX guests
x86/hyperv: Fix undefined reference to isolation_type_en_snp without CONFIG_HYPERV
x86/hyperv: Add missing 'inline' to hv_snp_boot_ap() stub
hv: hyperv.h: Replace one-element array with flexible-array member
Drivers: hv: vmbus: Don't dereference ACPI root object handle
x86/hyperv: Add hyperv-specific handling for VMMCALL under SEV-ES
x86/hyperv: Add smp support for SEV-SNP guest
clocksource: hyper-v: Mark hyperv tsc page unencrypted in sev-snp enlightened guest
x86/hyperv: Use vmmcall to implement Hyper-V hypercall in sev-snp enlightened guest
drivers: hv: Mark percpu hvcall input arg page unencrypted in SEV-SNP enlightened guest
...
|
|
In ms_hyperv_init_platform(), do not distinguish between a SNP VM with
the paravisor and a SNP VM without the paravisor.
Replace hv_isolation_type_en_snp() with
!ms_hyperv.paravisor_present && hv_isolation_type_snp().
The hv_isolation_type_en_snp() in drivers/hv/hv.c and
drivers/hv/hv_common.c can be changed to hv_isolation_type_snp() since
we know !ms_hyperv.paravisor_present is true there.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-10-decui@microsoft.com
|
|
When the paravisor is present, a SNP VM must use GHCB to access some
special MSRs, including HV_X64_MSR_GUEST_OS_ID and some SynIC MSRs.
Similarly, when the paravisor is present, a TDX VM must use TDX GHCI
to access the same MSRs.
Implement hv_tdx_msr_write() and hv_tdx_msr_read(), and use the helper
functions hv_ivm_msr_read() and hv_ivm_msr_write() to access the MSRs
in a unified way for SNP/TDX VMs with the paravisor.
Do not export hv_tdx_msr_write() and hv_tdx_msr_read(), because we never
really used hv_ghcb_msr_write() and hv_ghcb_msr_read() in any module.
Update arch/x86/include/asm/mshyperv.h so that the kernel can still build
if CONFIG_AMD_MEM_ENCRYPT or CONFIG_INTEL_TDX_GUEST is not set, or
neither is set.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-9-decui@microsoft.com
|
|
The new variable hyperv_paravisor_present is set only when the VM
is a SNP/TDX VM with the paravisor running: see ms_hyperv_init_platform().
We introduce hyperv_paravisor_present because we can not use
ms_hyperv.paravisor_present in arch/x86/include/asm/mshyperv.h:
struct ms_hyperv_info is defined in include/asm-generic/mshyperv.h, which
is included at the end of arch/x86/include/asm/mshyperv.h, but at the
beginning of arch/x86/include/asm/mshyperv.h, we would already need to use
struct ms_hyperv_info in hv_do_hypercall().
We use hyperv_paravisor_present only in include/asm-generic/mshyperv.h,
and use ms_hyperv.paravisor_present elsewhere. In the future, we'll
introduce a hypercall function structure for different VM types, and
at boot time, the right function pointers would be written into the
structure so that runtime testing of TDX vs. SNP vs. normal will be
avoided and hyperv_paravisor_present will no longer be needed.
Call hv_vtom_init() when it's a VBS VM or when ms_hyperv.paravisor_present
is true, i.e. the VM is a SNP VM or TDX VM with the paravisor.
Enhance hv_vtom_init() for a TDX VM with the paravisor.
In hv_common_cpu_init(), don't decrypt the hyperv_pcpu_input_arg
for a TDX VM with the paravisor, just like we don't decrypt the page
for a SNP VM with the paravisor.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-7-decui@microsoft.com
|
|
A fully enlightened TDX guest on Hyper-V (i.e. without the paravisor) only
uses the GHCI call rather than hv_hypercall_pg. Do not initialize
hypercall_pg for such a guest.
In hv_common_cpu_init(), the hyperv_pcpu_input_arg page needs to be
decrypted in such a guest.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-3-decui@microsoft.com
|
|
No logic change to SNP/VBS guests.
hv_isolation_type_tdx() will be used to instruct a TDX guest on Hyper-V to
do some TDX-specific operations, e.g. for a fully enlightened TDX guest
(i.e. without the paravisor), hv_do_hypercall() should use
__tdx_hypercall() and such a guest on Hyper-V should handle the Hyper-V
Event/Message/Monitor pages specially.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-2-decui@microsoft.com
|
|
When building without CONFIG_AMD_MEM_ENCRYPT, there are several
repeated instances of -Wunused-function due to missing 'inline' on
the stub of hy_snp_boot_ap():
In file included from drivers/hv/hv_common.c:29:
./arch/x86/include/asm/mshyperv.h:272:12: error: 'hv_snp_boot_ap' defined but not used [-Werror=unused-function]
272 | static int hv_snp_boot_ap(int cpu, unsigned long start_ip) { return 0; }
| ^~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Add 'inline' to fix the warnings.
Fixes: 44676bb9d566 ("x86/hyperv: Add smp support for SEV-SNP guest")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230822-hv_snp_boot_ap-missing-inline-v1-1-e712dcb2da0f@kernel.org
|
|
In the AMD SEV-SNP guest, AP needs to be started up via sev es
save area and Hyper-V requires to call HVCALL_START_VP hypercall
to pass the gpa of sev es save area with AP's vp index and VTL(Virtual
trust level) parameters. Override wakeup_secondary_cpu_64 callback
with hv_snp_boot_ap.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230818102919.1318039-8-ltykernel@gmail.com
|
|
enlightened guest
In sev-snp enlightened guest, Hyper-V hypercall needs
to use vmmcall to trigger vmexit and notify hypervisor
to handle hypercall request.
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230818102919.1318039-6-ltykernel@gmail.com
|
|
Introduce static key isolation_type_en_snp for enlightened
sev-snp guest check.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230818102919.1318039-2-ltykernel@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Fix a bug in a python script for Hyper-V (Ani Sinha)
- Workaround a bug in Hyper-V when IBT is enabled (Michael Kelley)
- Fix an issue parsing MP table when Linux runs in VTL2 (Saurabh
Sengar)
- Several cleanup patches (Nischala Yelchuri, Kameron Carr, YueHaibing,
ZhiHu)
* tag 'hyperv-fixes-signed-20230804' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: Remove unused extern declaration vmbus_ontimer()
x86/hyperv: add noop functions to x86_init mpparse functions
vmbus_testing: fix wrong python syntax for integer value comparison
x86/hyperv: fix a warning in mshyperv.h
x86/hyperv: Disable IBT when hypercall page lacks ENDBR instruction
x86/hyperv: Improve code for referencing hyperv_pcpu_input_arg
Drivers: hv: Change hv_free_hyperv_page() to take void * argument
|
|
The following checkpatch warning is removed:
WARNING: Use #include <linux/io.h> instead of <asm/io.h>
Signed-off-by: ZhiHu <huzhi001@208suo.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
With the intent to provide local_clock_noinstr(), a variant of
local_clock() that's safe to be called from noinstr code (with the
assumption that any such code will already be non-preemptible),
prepare for things by making the Hyper-V TSC and MSR sched_clock
implementations noinstr.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Co-developed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com> # Hyper-V
Link: https://lore.kernel.org/r/20230519102715.843039089@infradead.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Mark arch_cpu_idle_dead() __noreturn, make all architectures &
drivers that did this inconsistently follow this new, common
convention, and fix all the fallout that objtool can now detect
statically
- Fix/improve the ORC unwinder becoming unreliable due to
UNWIND_HINT_EMPTY ambiguity, split it into UNWIND_HINT_END_OF_STACK
and UNWIND_HINT_UNDEFINED to resolve it
- Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code
- Generate ORC data for __pfx code
- Add more __noreturn annotations to various kernel startup/shutdown
and panic functions
- Misc improvements & fixes
* tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
x86/hyperv: Mark hv_ghcb_terminate() as noreturn
scsi: message: fusion: Mark mpt_halt_firmware() __noreturn
x86/cpu: Mark {hlt,resume}_play_dead() __noreturn
btrfs: Mark btrfs_assertfail() __noreturn
objtool: Include weak functions in global_noreturns check
cpu: Mark nmi_panic_self_stop() __noreturn
cpu: Mark panic_smp_self_stop() __noreturn
arm64/cpu: Mark cpu_park_loop() and friends __noreturn
x86/head: Mark *_start_kernel() __noreturn
init: Mark start_kernel() __noreturn
init: Mark [arch_call_]rest_init() __noreturn
objtool: Generate ORC data for __pfx code
x86/linkage: Fix padding for typed functions
objtool: Separate prefix code from stack validation code
objtool: Remove superfluous dead_end_function() check
objtool: Add symbol iteration helpers
objtool: Add WARN_INSN()
scripts/objdump-func: Support multiple functions
context_tracking: Fix KCSAN noinstr violation
objtool: Add stackleak instrumentation to uaccess safe list
...
|
|
Virtual Trust Levels (VTL) helps enable Hyper-V Virtual Secure Mode (VSM)
feature. VSM is a set of hypervisor capabilities and enlightenments
offered to host and guest partitions which enable the creation and
management of new security boundaries within operating system software.
VSM achieves and maintains isolation through VTLs.
Add early initialization for Virtual Trust Levels (VTL). This includes
initializing the x86 platform for VTL and enabling boot support for
secondary CPUs to start in targeted VTL context. For now, only enable
the code for targeted VTL level as 2.
When starting an AP at a VTL other than VTL0, the AP must start directly
in 64-bit mode, bypassing the usual 16-bit -> 32-bit -> 64-bit mode
transition sequence that occurs after waking up an AP with SIPI whose
vector points to the 16-bit AP startup trampoline code.
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Stanislav Kinsburskii <stanislav.kinsburskii@gmail.com>
Link: https://lore.kernel.org/r/1681192532-15460-6-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Move hv_get_nmi_reason to .h file so it can be used in other
modules as well.
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1681192532-15460-4-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Annotate the function prototype and definition as noreturn to prevent
objtool warnings like:
vmlinux.o: warning: objtool: hyperv_init+0x55c: unreachable instruction
Also, as per Josh's suggestion, add it to the global_noreturns list.
As a comparison, an objdump output without the annotation:
[...]
1b63: mov $0x1,%esi
1b68: xor %edi,%edi
1b6a: callq ffffffff8102f680 <hv_ghcb_terminate>
1b6f: jmpq ffffffff82f217ec <hyperv_init+0x9c> # unreachable
1b74: cmpq $0xffffffffffffffff,-0x702a24(%rip)
[...]
Now, after adding the __noreturn to the function prototype:
[...]
17df: callq ffffffff8102f6d0 <hv_ghcb_negotiate_protocol>
17e4: test %al,%al
17e6: je ffffffff82f21bb9 <hyperv_init+0x469>
[...] <many insns>
1bb9: mov $0x1,%esi
1bbe: xor %edi,%edi
1bc0: callq ffffffff8102f680 <hv_ghcb_terminate>
1bc5: nopw %cs:0x0(%rax,%rax,1) # end of function
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/32453a703dfcf0d007b473c9acbf70718222b74b.1681342859.git.jpoimboe@kernel.org
|
|
Hyper-V guests on AMD SEV-SNP hardware have the option of using the
"virtual Top Of Memory" (vTOM) feature specified by the SEV-SNP
architecture. With vTOM, shared vs. private memory accesses are
controlled by splitting the guest physical address space into two
halves.
vTOM is the dividing line where the uppermost bit of the physical
address space is set; e.g., with 47 bits of guest physical address
space, vTOM is 0x400000000000 (bit 46 is set). Guest physical memory is
accessible at two parallel physical addresses -- one below vTOM and one
above vTOM. Accesses below vTOM are private (encrypted) while accesses
above vTOM are shared (decrypted). In this sense, vTOM is like the
GPA.SHARED bit in Intel TDX.
Support for Hyper-V guests using vTOM was added to the Linux kernel in
two patch sets[1][2]. This support treats the vTOM bit as part of
the physical address. For accessing shared (decrypted) memory, these
patch sets create a second kernel virtual mapping that maps to physical
addresses above vTOM.
A better approach is to treat the vTOM bit as a protection flag, not
as part of the physical address. This new approach is like the approach
for the GPA.SHARED bit in Intel TDX. Rather than creating a second kernel
virtual mapping, the existing mapping is updated using recently added
coco mechanisms.
When memory is changed between private and shared using
set_memory_decrypted() and set_memory_encrypted(), the PTEs for the
existing kernel mapping are changed to add or remove the vTOM bit in the
guest physical address, just as with TDX. The hypercalls to change the
memory status on the host side are made using the existing callback
mechanism. Everything just works, with a minor tweak to map the IO-APIC
to use private accesses.
To accomplish the switch in approach, the following must be done:
* Update Hyper-V initialization to set the cc_mask based on vTOM
and do other coco initialization.
* Update physical_mask so the vTOM bit is no longer treated as part
of the physical address
* Remove CC_VENDOR_HYPERV and merge the associated vTOM functionality
under CC_VENDOR_AMD. Update cc_mkenc() and cc_mkdec() to set/clear
the vTOM bit as a protection flag.
* Code already exists to make hypercalls to inform Hyper-V about pages
changing between shared and private. Update this code to run as a
callback from __set_memory_enc_pgtable().
* Remove the Hyper-V special case from __set_memory_enc_dec()
* Remove the Hyper-V specific call to swiotlb_update_mem_attributes()
since mem_encrypt_init() will now do it.
* Add a Hyper-V specific implementation of the is_private_mmio()
callback that returns true for the IO-APIC and vTPM MMIO addresses
[1] https://lore.kernel.org/all/20211025122116.264793-1-ltykernel@gmail.com/
[2] https://lore.kernel.org/all/20211213071407.314309-1-ltykernel@gmail.com/
[ bp: Touchups. ]
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/1679838727-87310-7-git-send-email-mikelley@microsoft.com
|
|
hv_get_nested_reg only translates SINT0, resulting in the wrong sint
being registered by nested vmbus.
Fix the issue with new utility function hv_is_sint_reg.
While at it, improve clarity of hv_set_non_nested_register and hv_is_synic_reg.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Jinank Jain <jinankjain@linux.microsoft.com>
Link: https://lore.kernel.org/r/1675980172-6851-1-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
According to TLFS, in order to communicate to L0 hypervisor there needs
to be an additional bit set in the control register. This communication
is required to perform privileged instructions which can only be
performed by L0 hypervisor. An example of that could be setting up the
VMBus infrastructure.
Signed-off-by: Jinank Jain <jinankjain@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/24f9d46d5259a688113e6e5e69e21002647f4949.1672639707.git.jinankjain@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Child partitions are free to allocate SynIC message and event page but in
case of root partition it must use the pages allocated by Microsoft
Hypervisor (MSHV). Base address for these pages can be found using
synthetic MSRs exposed by MSHV. There is a slight difference in those MSRs
for nested vs non-nested root partition.
Signed-off-by: Jinank Jain <jinankjain@linux.microsoft.com>
Reviewed-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/cb951fb1ad6814996fc54f4a255c5841a20a151f.1672639707.git.jinankjain@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
clocksource/hyperv_timer.h is included into the VDSO build. It includes
asm/mshyperv.h which in turn includes the world and some more. This worked
so far by chance, but any subtle change in the include chain results in a
build breakage because VDSO builds are building user space libraries.
Include asm/hyperv-tlfs.h instead which contains everything what the VDSO
build needs except the hv_get_raw_timer() define. Move this define into a
separate header file, which contains the prerequisites (msr.h) and is
included by clocksource/hyperv_timer.h.
Fixup drivers/hv/vmbus_drv.c which relies on the indirect include of
asm/mshyperv.h.
With that the VDSO build only pulls in the minimum requirements.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/87fsemtut0.ffs@tglx
|
|
Hyper-V Isolation VM current code uses sev_es_ghcb_hv_call()
to read/write MSR via GHCB page and depends on the sev code.
This may cause regression when sev code changes interface
design.
The latest SEV-ES code requires to negotiate GHCB version before
reading/writing MSR via GHCB page and sev_es_ghcb_hv_call() doesn't
work for Hyper-V Isolation VM. Add Hyper-V ghcb related implementation
to decouple SEV and Hyper-V code. Negotiate GHCB version in the
hyperv_init() and use the version to communicate with Hyper-V
in the ghcb hv call function.
Fixes: 2ea29c5abbc2 ("x86/sev: Save the negotiated GHCB version")
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220614014553.1915929-1-ltykernel@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- More patches for Hyper-V isolation VM support (Tianyu Lan)
- Bug fixes and clean-up patches from various people
* tag 'hyperv-next-signed-20220114' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
scsi: storvsc: Fix storvsc_queuecommand() memory leak
x86/hyperv: Properly deal with empty cpumasks in hyperv_flush_tlb_multi()
Drivers: hv: vmbus: Initialize request offers message for Isolation VM
scsi: storvsc: Fix unsigned comparison to zero
swiotlb: Add CONFIG_HAS_IOMEM check around swiotlb_mem_remap()
x86/hyperv: Fix definition of hv_ghcb_pg variable
Drivers: hv: Fix definition of hypercall input & output arg variables
net: netvsc: Add Isolation VM support for netvsc driver
scsi: storvsc: Add Isolation VM support for storvsc driver
hyper-v: Enable swiotlb bounce buffer for Isolation VM
x86/hyper-v: Add hyperv Isolation VM check in the cc_platform_has()
swiotlb: Add swiotlb bounce buffer remap function for HV IVM
|
|
Encapsulate arch dependencies in Hyper-V vPCI through a set of
arch-dependent interfaces. Adding these arch specific interfaces will
allow for an implementation for other architectures, such as arm64.
There are no functional changes expected from this patch.
Link: https://lore.kernel.org/r/1641411156-31705-2-git-send-email-sunilmut@linux.microsoft.com
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
|
|
The percpu variable hv_ghcb_pg is incorrectly defined. The __percpu
qualifier should be associated with the union hv_ghcb * (i.e.,
a pointer), not with the target of the pointer. This distinction
makes no difference to gcc and the generated code, but sparse
correctly complains. Fix the definition in the interest of
general correctness in addition to making sparse happy.
No functional change.
Fixes: 0cc4f6d9f0b9 ("x86/hyperv: Initialize GHCB page in Isolation VM")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1640662315-22260-2-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Hyperv provides GHCB protocol to write Synthetic Interrupt
Controller MSR registers in Isolation VM with AMD SEV SNP
and these registers are emulated by hypervisor directly.
Hyperv requires to write SINTx MSR registers twice. First
writes MSR via GHCB page to communicate with hypervisor
and then writes wrmsr instruction to talk with paravisor
which runs in VMPL0. Guest OS ID MSR also needs to be set
via GHCB page.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20211025122116.264793-7-ltykernel@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Add new hvcall guest address host visibility support to mark
memory visible to host. Call it inside set_memory_decrypted
/encrypted(). Add HYPERVISOR feature check in the
hv_is_isolation_supported() to optimize in non-virtualization
environment.
Acked-by: Dave Hansen <dave.hansen@intel.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20211025122116.264793-4-ltykernel@gmail.com
[ wei: fix conflicts with tip ]
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Hyperv exposes GHCB page via SEV ES GHCB MSR for SNP guest
to communicate with hypervisor. Map GHCB page for all
cpus to read/write MSR register and submit hvcall request
via ghcb page.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20211025122116.264793-2-ltykernel@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
The code to allocate and initialize the hv_vp_index array is
architecture neutral. Similarly, the code to allocate and
populate the hypercall input and output arg pages is architecture
neutral. Move both sets of code out from arch/x86 and into
utility functions in drivers/hv/hv_common.c that can be shared
by Hyper-V initialization on ARM64.
No functional changes. However, the allocation of the hypercall
input and output arg pages is done differently so that the
size is always the Hyper-V page size, even if not the same as
the guest page size (such as with ARM64's 64K page size).
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1626287687-2045-2-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
There is not a consistent pattern for checking Hyper-V hypercall status.
Existing code uses a number of variants. The variants work, but a consistent
pattern would improve the readability of the code, and be more conformant
to what the Hyper-V TLFS says about hypercall status.
Implemented new helper functions hv_result(), hv_result_success(), and
hv_repcomp(). Changed the places where hv_do_hypercall() and related variants
are used to use the helper functions.
Signed-off-by: Joseph Salisbury <joseph.salisbury@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1618620183-9967-2-git-send-email-joseph.salisbury@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
