summaryrefslogtreecommitdiff
path: root/arch/x86/include/asm/mmu_context.h
AgeCommit message (Collapse)Author
2025-05-06x86/mm: Fix false positive warning in switch_mm_irqs_off()Peter Zijlstra
Multiple testers reported the following new warning: WARNING: CPU: 0 PID: 0 at arch/x86/mm/tlb.c:795 Which corresponds to: if (IS_ENABLED(CONFIG_DEBUG_VM) && WARN_ON_ONCE(prev != &init_mm && !cpumask_test_cpu(cpu, mm_cpumask(next)))) cpumask_set_cpu(cpu, mm_cpumask(next)); So the problem is that unuse_temporary_mm() explicitly clears that bit; and it has to, because otherwise the flush_tlb_mm_range() in __text_poke() will try sending IPIs, which are not at all needed. See also: https://lore.kernel.org/all/20241113095550.GBZzR3pg-RhJKPDazS@fat_crate.local/ Notably, the whole {,un}use_temporary_mm() thing requires preemption to be disabled across it with the express purpose of keeping all TLB nonsense CPU local, such that invalidations can also stay local etc. However, as a side-effect, we violate this above WARN(), which sorta makes sense for the normal case, but very much doesn't make sense here. Change unuse_temporary_mm() to mark the mm_struct such that a further exception (beyond init_mm) can be grafted, to keep the warning for all the other cases. Reported-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Reported-by: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rik van Riel <riel@surriel.com> Link: https://lore.kernel.org/r/20250430081154.GH4439@noisy.programming.kicks-ass.net
2025-04-12x86/mm: Opt-in to IRQs-off activate_mm()Andy Lutomirski
We gain nothing by having the core code enable IRQs right before calling activate_mm() only for us to turn them right back off again in switch_mm(). This will save a few cycles, so execve() should be blazingly fast with this patch applied! Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Rik van Riel <riel@surriel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/r/20250402094540.3586683-8-mingo@kernel.org
2025-04-12x86/mm: Remove 'mm' argument from unuse_temporary_mm() againPeter Zijlstra
Now that unuse_temporary_mm() lives in tlb.c it can access cpu_tlbstate.loaded_mm. [ mingo: Merged it on top of x86/alternatives ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Rik van Riel <riel@surriel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/r/20250402094540.3586683-5-mingo@kernel.org
2025-04-12x86/mm: Make use_/unuse_temporary_mm() non-staticAndy Lutomirski
This prepares them for use outside of the alternative machinery. The code is unchanged. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Rik van Riel <riel@surriel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/r/20250402094540.3586683-4-mingo@kernel.org
2025-03-19x86/mm: Add global ASID process exit helpersRik van Riel
A global ASID is allocated for the lifetime of a process. Free the global ASID at process exit time. [ bp: Massage, create helpers, hide details inside them. ] Signed-off-by: Rik van Riel <riel@surriel.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20250226030129.530345-10-riel@surriel.com
2025-03-19x86/mm: Add global ASID allocation helper functionsRik van Riel
Add functions to manage global ASID space. Multithreaded processes that are simultaneously active on 4 or more CPUs can get a global ASID, resulting in the same PCID being used for that process on every CPU. This in turn will allow the kernel to use hardware-assisted TLB flushing through AMD INVLPGB or Intel RAR for these processes. [ bp: - Extend use_global_asid() comment - s/X86_BROADCAST_TLB_FLUSH/BROADCAST_TLB_FLUSH/g - other touchups ] Signed-off-by: Rik van Riel <riel@surriel.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20250226030129.530345-8-riel@surriel.com
2024-12-06x86/mm/tlb: Only trim the mm_cpumask once a secondRik van Riel
Setting and clearing CPU bits in the mm_cpumask is only ever done by the CPU itself, from the context switch code or the TLB flush code. Synchronization is handled by switch_mm_irqs_off() blocking interrupts. Sending TLB flush IPIs to CPUs that are in the mm_cpumask, but no longer running the program causes a regression in the will-it-scale tlbflush2 test. This test is contrived, but a large regression here might cause a small regression in some real world workload. Instead of always sending IPIs to CPUs that are in the mm_cpumask, but no longer running the program, send these IPIs only once a second. The rest of the time we can skip over CPUs where the loaded_mm is different from the target mm. Reported-by: kernel test roboto <oliver.sang@intel.com> Signed-off-by: Rik van Riel <riel@surriel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20241204210316.612ee573@fangorn Closes: https://lore.kernel.org/oe-lkp/202411282207.6bd28eae-lkp@intel.com/
2024-09-21Merge tag 'mm-stable-2024-09-20-02-31' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: "Along with the usual shower of singleton patches, notable patch series in this pull request are: - "Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds consistency to the APIs and behaviour of these two core allocation functions. This also simplifies/enables Rustification. - "Some cleanups for shmem" from Baolin Wang. No functional changes - mode code reuse, better function naming, logic simplifications. - "mm: some small page fault cleanups" from Josef Bacik. No functional changes - code cleanups only. - "Various memory tiering fixes" from Zi Yan. A small fix and a little cleanup. - "mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and simplifications and .text shrinkage. - "Kernel stack usage histogram" from Pasha Tatashin and Shakeel Butt. This is a feature, it adds new feilds to /proc/vmstat such as $ grep kstack /proc/vmstat kstack_1k 3 kstack_2k 188 kstack_4k 11391 kstack_8k 243 kstack_16k 0 which tells us that 11391 processes used 4k of stack while none at all used 16k. Useful for some system tuning things, but partivularly useful for "the dynamic kernel stack project". - "kmemleak: support for percpu memory leak detect" from Pavel Tikhomirov. Teaches kmemleak to detect leaksage of percpu memory. - "mm: memcg: page counters optimizations" from Roman Gushchin. "3 independent small optimizations of page counters". - "mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from David Hildenbrand. Improves PTE/PMD splitlock detection, makes powerpc/8xx work correctly by design rather than by accident. - "mm: remove arch_make_page_accessible()" from David Hildenbrand. Some folio conversions which make arch_make_page_accessible() unneeded. - "mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David Finkel. Cleans up and fixes our handling of the resetting of the cgroup/process peak-memory-use detector. - "Make core VMA operations internal and testable" from Lorenzo Stoakes. Rationalizaion and encapsulation of the VMA manipulation APIs. With a view to better enable testing of the VMA functions, even from a userspace-only harness. - "mm: zswap: fixes for global shrinker" from Takero Funaki. Fix issues in the zswap global shrinker, resulting in improved performance. - "mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill in some missing info in /proc/zoneinfo. - "mm: replace follow_page() by folio_walk" from David Hildenbrand. Code cleanups and rationalizations (conversion to folio_walk()) resulting in the removal of follow_page(). - "improving dynamic zswap shrinker protection scheme" from Nhat Pham. Some tuning to improve zswap's dynamic shrinker. Significant reductions in swapin and improvements in performance are shown. - "mm: Fix several issues with unaccepted memory" from Kirill Shutemov. Improvements to the new unaccepted memory feature, - "mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on DAX PUDs. This was missing, although nobody seems to have notied yet. - "Introduce a store type enum for the Maple tree" from Sidhartha Kumar. Cleanups and modest performance improvements for the maple tree library code. - "memcg: further decouple v1 code from v2" from Shakeel Butt. Move more cgroup v1 remnants away from the v2 memcg code. - "memcg: initiate deprecation of v1 features" from Shakeel Butt. Adds various warnings telling users that memcg v1 features are deprecated. - "mm: swap: mTHP swap allocator base on swap cluster order" from Chris Li. Greatly improves the success rate of the mTHP swap allocation. - "mm: introduce numa_memblks" from Mike Rapoport. Moves various disparate per-arch implementations of numa_memblk code into generic code. - "mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly improves the performance of munmap() of swap-filled ptes. - "support large folio swap-out and swap-in for shmem" from Baolin Wang. With this series we no longer split shmem large folios into simgle-page folios when swapping out shmem. - "mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice performance improvements and code reductions for gigantic folios. - "support shmem mTHP collapse" from Baolin Wang. Adds support for khugepaged's collapsing of shmem mTHP folios. - "mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect() performance regression due to the addition of mseal(). - "Increase the number of bits available in page_type" from Matthew Wilcox. Increases the number of bits available in page_type! - "Simplify the page flags a little" from Matthew Wilcox. Many legacy page flags are now folio flags, so the page-based flags and their accessors/mutators can be removed. - "mm: store zero pages to be swapped out in a bitmap" from Usama Arif. An optimization which permits us to avoid writing/reading zero-filled zswap pages to backing store. - "Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race window which occurs when a MAP_FIXED operqtion is occurring during an unrelated vma tree walk. - "mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of the vma_merge() functionality, making ot cleaner, more testable and better tested. - "misc fixups for DAMON {self,kunit} tests" from SeongJae Park. Minor fixups of DAMON selftests and kunit tests. - "mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang. Code cleanups and folio conversions. - "Shmem mTHP controls and stats improvements" from Ryan Roberts. Cleanups for shmem controls and stats. - "mm: count the number of anonymous THPs per size" from Barry Song. Expose additional anon THP stats to userspace for improved tuning. - "mm: finish isolate/putback_lru_page()" from Kefeng Wang: more folio conversions and removal of now-unused page-based APIs. - "replace per-quota region priorities histogram buffer with per-context one" from SeongJae Park. DAMON histogram rationalization. - "Docs/damon: update GitHub repo URLs and maintainer-profile" from SeongJae Park. DAMON documentation updates. - "mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and improve related doc and warn" from Jason Wang: fixes usage of page allocator __GFP_NOFAIL and GFP_ATOMIC flags. - "mm: split underused THPs" from Yu Zhao. Improve THP=always policy. This was overprovisioning THPs in sparsely accessed memory areas. - "zram: introduce custom comp backends API" frm Sergey Senozhatsky. Add support for zram run-time compression algorithm tuning. - "mm: Care about shadow stack guard gap when getting an unmapped area" from Mark Brown. Fix up the various arch_get_unmapped_area() implementations to better respect guard areas. - "Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability of mem_cgroup_iter() and various code cleanups. - "mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge pfnmap support. - "resource: Fix region_intersects() vs add_memory_driver_managed()" from Huang Ying. Fix a bug in region_intersects() for systems with CXL memory. - "mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches a couple more code paths to correctly recover from the encountering of poisoned memry. - "mm: enable large folios swap-in support" from Barry Song. Support the swapin of mTHP memory into appropriately-sized folios, rather than into single-page folios" * tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (416 commits) zram: free secondary algorithms names uprobes: turn xol_area->pages[2] into xol_area->page uprobes: introduce the global struct vm_special_mapping xol_mapping Revert "uprobes: use vm_special_mapping close() functionality" mm: support large folios swap-in for sync io devices mm: add nr argument in mem_cgroup_swapin_uncharge_swap() helper to support large folios mm: fix swap_read_folio_zeromap() for large folios with partial zeromap mm/debug_vm_pgtable: Use pxdp_get() for accessing page table entries set_memory: add __must_check to generic stubs mm/vma: return the exact errno in vms_gather_munmap_vmas() memcg: cleanup with !CONFIG_MEMCG_V1 mm/show_mem.c: report alloc tags in human readable units mm: support poison recovery from copy_present_page() mm: support poison recovery from do_cow_fault() resource, kunit: add test case for region_intersects() resource: make alloc_free_mem_region() works for iomem_resource mm: z3fold: deprecate CONFIG_Z3FOLD vfio/pci: implement huge_fault support mm/arm64: support large pfn mappings mm/x86: support large pfn mappings ...
2024-09-01mm: remove arch_unmap()Michael Ellerman
Now that powerpc no longer uses arch_unmap() to handle VDSO unmapping, there are no meaningful implementions left. Drop support for it entirely, and update comments which refer to it. Link: https://lkml.kernel.org/r/20240812082605.743814-3-mpe@ellerman.id.au Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Jeff Xu <jeffxu@google.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Pedro Falcato <pedro.falcato@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-02x86/mm: Fix LAM inconsistency during context switchYosry Ahmed
LAM can only be enabled when a process is single-threaded. But _kernel_ threads can temporarily use a single-threaded process's mm. That means that a context-switching kernel thread can race and observe the mm's LAM metadata (mm->context.lam_cr3_mask) change. The context switch code does two logical things with that metadata: populate CR3 and populate 'cpu_tlbstate.lam'. If it hits this race, 'cpu_tlbstate.lam' and CR3 can end up out of sync. This de-synchronization is currently harmless. But it is confusing and might lead to warnings or real bugs. Update set_tlbstate_lam_mode() to take in the LAM mask and untag mask instead of an mm_struct pointer, and while we are at it, rename it to cpu_tlbstate_update_lam(). This should also make it clearer that we are updating cpu_tlbstate. In switch_mm_irqs_off(), read the LAM mask once and use it for both the cpu_tlbstate update and the CR3 update. Signed-off-by: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Link: https://lore.kernel.org/all/20240702132139.3332013-3-yosryahmed%40google.com
2023-09-19x86/shstk: Handle vfork clone failure correctlyRick Edgecombe
Shadow stacks are allocated automatically and freed on exit, depending on the clone flags. The two cases where new shadow stacks are not allocated are !CLONE_VM (fork()) and CLONE_VFORK (vfork()). For !CLONE_VM, although a new stack is not allocated, it can be freed normally because it will happen in the child's copy of the VM. However, for CLONE_VFORK the parent and the child are actually using the same shadow stack. So the kernel doesn't need to allocate *or* free a shadow stack for a CLONE_VFORK child. CLONE_VFORK children already need special tracking to avoid returning to userspace until the child exits or execs. Shadow stack uses this same tracking to avoid freeing CLONE_VFORK shadow stacks. However, the tracking is not setup until the clone has succeeded (internally). Which means, if a CLONE_VFORK fails, the existing logic will not know it is a CLONE_VFORK and proceed to unmap the parents shadow stack. This error handling cleanup logic runs via exit_thread() in the bad_fork_cleanup_thread label in copy_process(). The issue was seen in the glibc test "posix/tst-spawn3-pidfd" while running with shadow stack using currently out-of-tree glibc patches. Fix it by not unmapping the vfork shadow stack in the error case as well. Since clone is implemented in core code, it is not ideal to pass the clone flags along the error path in order to have shadow stack code have symmetric logic in the freeing half of the thread shadow stack handling. Instead use the existing state for thread shadow stacks to track whether the thread is managing its own shadow stack. For CLONE_VFORK, simply set shstk->base and shstk->size to 0, and have it mean the thread is not managing a shadow stack and so should skip cleanup work. Implement this by breaking up the CLONE_VFORK and !CLONE_VM cases in shstk_alloc_thread_stack() to separate conditionals since, the logic is now different between them. In the case of CLONE_VFORK && !CLONE_VM, the existing behavior is to not clean up the shadow stack in the child (which should go away quickly with either be exit or exec), so maintain that behavior by handling the CLONE_VFORK case first in the allocation path. This new logioc cleanly handles the case of normal, successful CLONE_VFORK's skipping cleaning up their shadow stack's on exit as well. So remove the existing, vfork shadow stack freeing logic. This is in deactivate_mm() where vfork_done is used to tell if it is a vfork child that can skip cleaning up the thread shadow stack. Fixes: b2926a36b97a ("x86/shstk: Handle thread shadow stack") Reported-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Tested-by: H.J. Lu <hjl.tools@gmail.com> Link: https://lore.kernel.org/all/20230908203655.543765-2-rick.p.edgecombe%40intel.com
2023-08-02x86/shstk: Handle thread shadow stackRick Edgecombe
When a process is duplicated, but the child shares the address space with the parent, there is potential for the threads sharing a single stack to cause conflicts for each other. In the normal non-CET case this is handled in two ways. With regular CLONE_VM a new stack is provided by userspace such that the parent and child have different stacks. For vfork, the parent is suspended until the child exits. So as long as the child doesn't return from the vfork()/CLONE_VFORK calling function and sticks to a limited set of operations, the parent and child can share the same stack. For shadow stack, these scenarios present similar sharing problems. For the CLONE_VM case, the child and the parent must have separate shadow stacks. Instead of changing clone to take a shadow stack, have the kernel just allocate one and switch to it. Use stack_size passed from clone3() syscall for thread shadow stack size. A compat-mode thread shadow stack size is further reduced to 1/4. This allows more threads to run in a 32-bit address space. The clone() does not pass stack_size, which was added to clone3(). In that case, use RLIMIT_STACK size and cap to 4 GB. For shadow stack enabled vfork(), the parent and child can share the same shadow stack, like they can share a normal stack. Since the parent is suspended until the child terminates, the child will not interfere with the parent while executing as long as it doesn't return from the vfork() and overwrite up the shadow stack. The child can safely overwrite down the shadow stack, as the parent can just overwrite this later. So CET does not add any additional limitations for vfork(). Free the shadow stack on thread exit by doing it in mm_release(). Skip this when exiting a vfork() child since the stack is shared in the parent. During this operation, the shadow stack pointer of the new thread needs to be updated to point to the newly allocated shadow stack. Since the ability to do this is confined to the FPU subsystem, change fpu_clone() to take the new shadow stack pointer, and update it internally inside the FPU subsystem. This part was suggested by Thomas Gleixner. Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-30-rick.p.edgecombe%40intel.com
2023-04-28Merge tag 'x86_mm_for_6.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 LAM (Linear Address Masking) support from Dave Hansen: "Add support for the new Linear Address Masking CPU feature. This is similar to ARM's Top Byte Ignore and allows userspace to store metadata in some bits of pointers without masking it out before use" * tag 'x86_mm_for_6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/iommu/sva: Do not allow to set FORCE_TAGGED_SVA bit from outside x86/mm/iommu/sva: Fix error code for LAM enabling failure due to SVA selftests/x86/lam: Add test cases for LAM vs thread creation selftests/x86/lam: Add ARCH_FORCE_TAGGED_SVA test cases for linear-address masking selftests/x86/lam: Add inherit test cases for linear-address masking selftests/x86/lam: Add io_uring test cases for linear-address masking selftests/x86/lam: Add mmap and SYSCALL test cases for linear-address masking selftests/x86/lam: Add malloc and tag-bits test cases for linear-address masking x86/mm/iommu/sva: Make LAM and SVA mutually exclusive iommu/sva: Replace pasid_valid() helper with mm_valid_pasid() mm: Expose untagging mask in /proc/$PID/status x86/mm: Provide arch_prctl() interface for LAM x86/mm: Reduce untagged_addr() overhead for systems without LAM x86/uaccess: Provide untagged_addr() and remove tags before address check mm: Introduce untagged_addr_remote() x86/mm: Handle LAM on context switch x86: CPUID and CR3/CR4 flags for Linear Address Masking x86: Allow atomic MM_CONTEXT flags setting x86/mm: Rework address range check in get_user() and put_user()
2023-03-16x86/mm/iommu/sva: Make LAM and SVA mutually exclusiveKirill A. Shutemov
IOMMU and SVA-capable devices know nothing about LAM and only expect canonical addresses. An attempt to pass down tagged pointer will lead to address translation failure. By default do not allow to enable both LAM and use SVA in the same process. The new ARCH_FORCE_TAGGED_SVA arch_prctl() overrides the limitation. By using the arch_prctl() userspace takes responsibility to never pass tagged address to the device. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/all/20230312112612.31869-12-kirill.shutemov%40linux.intel.com
2023-03-16mm: Expose untagging mask in /proc/$PID/statusKirill A. Shutemov
Add a line in /proc/$PID/status to report untag_mask. It can be used to find out LAM status of the process from the outside. It is useful for debuggers. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Alexander Potapenko <glider@google.com> Link: https://lore.kernel.org/all/20230312112612.31869-10-kirill.shutemov%40linux.intel.com
2023-03-16x86/uaccess: Provide untagged_addr() and remove tags before address checkKirill A. Shutemov
untagged_addr() is a helper used by the core-mm to strip tag bits and get the address to the canonical shape based on rules of the current thread. It only handles userspace addresses. The untagging mask is stored in per-CPU variable and set on context switching to the task. The tags must not be included into check whether it's okay to access the userspace address. Strip tags in access_ok(). Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Alexander Potapenko <glider@google.com> Link: https://lore.kernel.org/all/20230312112612.31869-7-kirill.shutemov%40linux.intel.com
2023-03-16x86/mm: Handle LAM on context switchKirill A. Shutemov
Linear Address Masking mode for userspace pointers encoded in CR3 bits. The mode is selected per-process and stored in mm_context_t. switch_mm_irqs_off() now respects selected LAM mode and constructs CR3 accordingly. The active LAM mode gets recorded in the tlb_state. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Alexander Potapenko <glider@google.com> Link: https://lore.kernel.org/all/20230312112612.31869-5-kirill.shutemov%40linux.intel.com
2023-03-16x86: Allow atomic MM_CONTEXT flags settingKirill A. Shutemov
So far there's no need in atomic setting of MM context flags in mm_context_t::flags. The flags set early in exec and never change after that. LAM enabling requires atomic flag setting. The upcoming flag MM_CONTEXT_FORCE_TAGGED_SVA can be set much later in the process lifetime where multiple threads exist. Convert the field to unsigned long and do MM_CONTEXT_* accesses with __set_bit() and test_bit(). No functional changes. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Alexander Potapenko <glider@google.com> Link: https://lore.kernel.org/all/20230312112612.31869-3-kirill.shutemov%40linux.intel.com
2023-03-06x86/paravirt: Merge activate_mm() and dup_mmap() callbacksJuergen Gross
The two paravirt callbacks .mmu.activate_mm() and .mmu.dup_mmap() are sharing the same implementations in all cases: for Xen PV guests they are pinning the PGD of the new mm_struct, and for all other cases they are a NOP. In the end, both callbacks are meant to register an address space with the underlying hypervisor, so there needs to be only a single callback for that purpose. So merge them to a common callback .mmu.enter_mmap() (in contrast to the corresponding already existing .mmu.exit_mmap()). As the first parameter of the old callbacks isn't used, drop it from the replacement one. [ bp: Remove last occurrence of paravirt_activate_mm() in asm/mmu_context.h ] Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu> Link: https://lore.kernel.org/r/20230207075902.7539-1-jgross@suse.com
2023-01-12x86/gsseg: Move load_gs_index() to its own new header fileH. Peter Anvin (Intel)
GS is a special segment on x86_64, move load_gs_index() to its own new header file to simplify header inclusion. No change in functionality. Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com> Signed-off-by: Xin Li <xin3.li@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20230112072032.35626-5-xin3.li@intel.com
2022-04-14x86/32: Remove lazy GS macrosBrian Gerst
GS is always a user segment now. Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20220325153953.162643-4-brgerst@gmail.com
2020-12-15Merge tag 'asm-generic-mmu-context-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic mmu-context cleanup from Arnd Bergmann: "This is a cleanup series from Nicholas Piggin, preparing for later changes. The asm/mmu_context.h header are generalized and common code moved to asm-gneneric/mmu_context.h. This saves a bit of code and makes it easier to change in the future" * tag 'asm-generic-mmu-context-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (25 commits) h8300: Fix generic mmu_context build m68k: mmu_context: Fix Sun-3 build xtensa: use asm-generic/mmu_context.h for no-op implementations x86: use asm-generic/mmu_context.h for no-op implementations um: use asm-generic/mmu_context.h for no-op implementations sparc: use asm-generic/mmu_context.h for no-op implementations sh: use asm-generic/mmu_context.h for no-op implementations s390: use asm-generic/mmu_context.h for no-op implementations riscv: use asm-generic/mmu_context.h for no-op implementations powerpc: use asm-generic/mmu_context.h for no-op implementations parisc: use asm-generic/mmu_context.h for no-op implementations openrisc: use asm-generic/mmu_context.h for no-op implementations nios2: use asm-generic/mmu_context.h for no-op implementations nds32: use asm-generic/mmu_context.h for no-op implementations mips: use asm-generic/mmu_context.h for no-op implementations microblaze: use asm-generic/mmu_context.h for no-op implementations m68k: use asm-generic/mmu_context.h for no-op implementations ia64: use asm-generic/mmu_context.h for no-op implementations hexagon: use asm-generic/mmu_context.h for no-op implementations csky: use asm-generic/mmu_context.h for no-op implementations ...
2020-10-27x86: use asm-generic/mmu_context.h for no-op implementationsNicholas Piggin
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-26x86/mm: Convert mmu context ia32_compat into a proper flags fieldGabriel Krisman Bertazi
The ia32_compat attribute is a weird thing. It mirrors TIF_IA32 and TIF_X32 and is used only in two very unrelated places: (1) to decide if the vsyscall page is accessible (2) for uprobes to find whether the patched instruction is 32 or 64 bit. In preparation to remove the TIF flags, a new mechanism is required for ia32_compat, but given its odd semantics, adding a real flags field which configures these specific behaviours is the best option. So, set_personality_x64() can ask for the vsyscall page, which is not available in x32/ia32 and set_personality_ia32() can configure the uprobe code as needed. uprobe cannot rely on other methods like user_64bit_mode() to decide how to patch, so it needs some specific flag like this. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski<luto@kernel.org> Link: https://lore.kernel.org/r/20201004032536.1229030-10-krisman@collabora.com
2020-08-07mm: remove unneeded includes of <asm/pgalloc.h>Mike Rapoport
Patch series "mm: cleanup usage of <asm/pgalloc.h>" Most architectures have very similar versions of pXd_alloc_one() and pXd_free_one() for intermediate levels of page table. These patches add generic versions of these functions in <asm-generic/pgalloc.h> and enable use of the generic functions where appropriate. In addition, functions declared and defined in <asm/pgalloc.h> headers are used mostly by core mm and early mm initialization in arch and there is no actual reason to have the <asm/pgalloc.h> included all over the place. The first patch in this series removes unneeded includes of <asm/pgalloc.h> In the end it didn't work out as neatly as I hoped and moving pXd_alloc_track() definitions to <asm-generic/pgalloc.h> would require unnecessary changes to arches that have custom page table allocations, so I've decided to move lib/ioremap.c to mm/ and make pgalloc-track.h local to mm/. This patch (of 8): In most cases <asm/pgalloc.h> header is required only for allocations of page table memory. Most of the .c files that include that header do not use symbols declared in <asm/pgalloc.h> and do not require that header. As for the other header files that used to include <asm/pgalloc.h>, it is possible to move that include into the .c file that actually uses symbols from <asm/pgalloc.h> and drop the include from the header file. The process was somewhat automated using sed -i -E '/[<"]asm\/pgalloc\.h/d' \ $(grep -L -w -f /tmp/xx \ $(git grep -E -l '[<"]asm/pgalloc\.h')) where /tmp/xx contains all the symbols defined in arch/*/include/asm/pgalloc.h. [rppt@linux.ibm.com: fix powerpc warning] Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Pekka Enberg <penberg@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Joerg Roedel <joro@8bytes.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Cc: Stafford Horne <shorne@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Joerg Roedel <jroedel@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Link: http://lkml.kernel.org/r/20200627143453.31835-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200627143453.31835-2-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-24x86/alternatives: Move temporary_mm helpers into CThomas Gleixner
The only user of these inlines is the text poke code and this must not be exposed to the world. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200421092559.139069561@linutronix.de
2020-04-24x86/cr4: Sanitize CR4.PCE updateThomas Gleixner
load_mm_cr4_irqsoff() is really a strange name for a function which has only one purpose: Update the CR4.PCE bit depending on the perf state. Rename it to update_cr4_pce_mm(), move it into the tlb code and provide a function which can be invoked by the perf smp function calls. Another step to remove exposure of cpu_tlbstate. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200421092559.049499158@linutronix.de
2020-04-24x86/tlb: Uninline __get_current_cr3_fast()Thomas Gleixner
cpu_tlbstate is exported because various TLB-related functions need access to it, but cpu_tlbstate is sensitive information which should only be accessed by well-contained kernel functions and not be directly exposed to modules. In preparation for unexporting cpu_tlbstate move __get_current_cr3_fast() into the x86 TLB management code. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lkml.kernel.org/r/20200421092558.848064318@linutronix.de
2020-04-02mm/vma: make vma_is_foreign() available for general useAnshuman Khandual
Idea of a foreign VMA with respect to the present context is very generic. But currently there are two identical definitions for this in powerpc and x86 platforms. Lets consolidate those redundant definitions while making vma_is_foreign() available for general use later. This should not cause any functional change. Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Link: http://lkml.kernel.org/r/1582782965-3274-3-git-send-email-anshuman.khandual@arm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-30Merge tag 'mpx-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/daveh/x86-mpx Pull x86 MPX removal from Dave Hansen: "MPX requires recompiling applications, which requires compiler support. Unfortunately, GCC 9.1 is expected to be be released without support for MPX. This means that there was only a relatively small window where folks could have ever used MPX. It failed to gain wide adoption in the industry, and Linux was the only mainstream OS to ever support it widely. Support for the feature may also disappear on future processors. This set completes the process that we started during the 5.4 merge window when the MPX prctl()s were removed. XSAVE support is left in place, which allows MPX-using KVM guests to continue to function" * tag 'mpx-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/daveh/x86-mpx: x86/mpx: remove MPX from arch/x86 mm: remove arch_bprm_mm_init() hook x86/mpx: remove bounds exception code x86/mpx: remove build infrastructure x86/alternatives: add missing insn.h include
2020-01-23x86/mpx: remove MPX from arch/x86Dave Hansen
From: Dave Hansen <dave.hansen@linux.intel.com> MPX is being removed from the kernel due to a lack of support in the toolchain going forward (gcc). This removes all the remaining (dead at this point) MPX handling code remaining in the tree. The only remaining code is the XSAVE support for MPX state which is currently needd for KVM to handle VMs which might use MPX. Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: x86@kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
2020-01-23mm: remove arch_bprm_mm_init() hookDave Hansen
From: Dave Hansen <dave.hansen@linux.intel.com> MPX is being removed from the kernel due to a lack of support in the toolchain going forward (gcc). arch_bprm_mm_init() is used at execve() time. The only non-stub implementation is on x86 for MPX. Remove the hook entirely from all architectures and generic code. Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: x86@kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-arch@vger.kernel.org Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
2019-12-10mm, x86/mm: Untangle address space layout definitions from basic pgtable ↵Ingo Molnar
type definitions - Untangle the somewhat incestous way of how VMALLOC_START is used all across the kernel, but is, on x86, defined deep inside one of the lowest level page table headers. It doesn't help that vmalloc.h only includes a single asm header: #include <asm/page.h> /* pgprot_t */ So there was no existing cross-arch way to decouple address layout definitions from page.h details. I used this: #ifndef VMALLOC_START # include <asm/vmalloc.h> #endif This way every architecture that wants to simplify page.h can do so. - Also on x86 we had a couple of LDT related inline functions that used the late-stage address space layout positions - but these could be uninlined without real trouble - the end result is cleaner this way as well. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Rik van Riel <riel@redhat.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-27perf/x86: Implement immediate enforcement of /sys/devices/cpu/rdpmc value of 0Anthony Steinhauser
When you successfully write 0 to /sys/devices/cpu/rdpmc, the RDPMC instruction should be disabled unconditionally and immediately (after you close the SYSFS file) by the documentation. Instead, in the current implementation the PMU must be reloaded which happens only eventually some time in the future. Only after that the RDPMC instruction becomes disabled (on ring 3) on the respective core. This change makes the treatment of the 0 value as blocking and as unconditional as the current treatment of the 2 value, only the CR4.PCE bit is naturally set to false instead of true. Signed-off-by: Anthony Steinhauser <asteinhauser@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: acme@kernel.org Link: https://lkml.kernel.org/r/20191125054838.137615-1-asteinhauser@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-24x86/mm: Avoid redundant interrupt disable in load_mm_cr4()Jan Kiszka
load_mm_cr4() is always called with interrupts disabled from: - switch_mm_irqs_off() - refresh_pce(), which is a on_each_cpu() callback Thus, disabling interrupts in cr4_set/clear_bits() is redundant. Implement cr4_set/clear_bits_irqsoff() helpers, rename load_mm_cr4() to load_mm_cr4_irqsoff() and use the new helpers. The new helpers do not need a lockdep assert as __cr4_set() has one already. The renaming in combination with the checks in __cr4_set() ensure that any changes in the boundary conditions at the call sites will be detected. [ tglx: Massaged change log ] Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/0fbbcb64-5f26-4ffb-1bb9-4f5f48426893@siemens.com
2019-05-09x86/mpx, mm/core: Fix recursive munmap() corruptionDave Hansen
This is a bit of a mess, to put it mildly. But, it's a bug that only seems to have showed up in 4.20 but wasn't noticed until now, because nobody uses MPX. MPX has the arch_unmap() hook inside of munmap() because MPX uses bounds tables that protect other areas of memory. When memory is unmapped, there is also a need to unmap the MPX bounds tables. Barring this, unused bounds tables can eat 80% of the address space. But, the recursive do_munmap() that gets called vi arch_unmap() wreaks havoc with __do_munmap()'s state. It can result in freeing populated page tables, accessing bogus VMA state, double-freed VMAs and more. See the "long story" further below for the gory details. To fix this, call arch_unmap() before __do_unmap() has a chance to do anything meaningful. Also, remove the 'vma' argument and force the MPX code to do its own, independent VMA lookup. == UML / unicore32 impact == Remove unused 'vma' argument to arch_unmap(). No functional change. I compile tested this on UML but not unicore32. == powerpc impact == powerpc uses arch_unmap() well to watch for munmap() on the VDSO and zeroes out 'current->mm->context.vdso_base'. Moving arch_unmap() makes this happen earlier in __do_munmap(). But, 'vdso_base' seems to only be used in perf and in the signal delivery that happens near the return to userspace. I can not find any likely impact to powerpc, other than the zeroing happening a little earlier. powerpc does not use the 'vma' argument and is unaffected by its removal. I compile-tested a 64-bit powerpc defconfig. == x86 impact == For the common success case this is functionally identical to what was there before. For the munmap() failure case, it's possible that some MPX tables will be zapped for memory that continues to be in use. But, this is an extraordinarily unlikely scenario and the harm would be that MPX provides no protection since the bounds table got reset (zeroed). I can't imagine anyone doing this: ptr = mmap(); // use ptr ret = munmap(ptr); if (ret) // oh, there was an error, I'll // keep using ptr. Because if you're doing munmap(), you are *done* with the memory. There's probably no good data in there _anyway_. This passes the original reproducer from Richard Biener as well as the existing mpx selftests/. The long story: munmap() has a couple of pieces: 1. Find the affected VMA(s) 2. Split the start/end one(s) if neceesary 3. Pull the VMAs out of the rbtree 4. Actually zap the memory via unmap_region(), including freeing page tables (or queueing them to be freed). 5. Fix up some of the accounting (like fput()) and actually free the VMA itself. This specific ordering was actually introduced by: dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap") during the 4.20 merge window. The previous __do_munmap() code was actually safe because the only thing after arch_unmap() was remove_vma_list(). arch_unmap() could not see 'vma' in the rbtree because it was detached, so it is not even capable of doing operations unsafe for remove_vma_list()'s use of 'vma'. Richard Biener reported a test that shows this in dmesg: [1216548.787498] BUG: Bad rss-counter state mm:0000000017ce560b idx:1 val:551 [1216548.787500] BUG: non-zero pgtables_bytes on freeing mm: 24576 What triggered this was the recursive do_munmap() called via arch_unmap(). It was freeing page tables that has not been properly zapped. But, the problem was bigger than this. For one, arch_unmap() can free VMAs. But, the calling __do_munmap() has variables that *point* to VMAs and obviously can't handle them just getting freed while the pointer is still in use. I tried a couple of things here. First, I tried to fix the page table freeing problem in isolation, but I then found the VMA issue. I also tried having the MPX code return a flag if it modified the rbtree which would force __do_munmap() to re-walk to restart. That spiralled out of control in complexity pretty fast. Just moving arch_unmap() and accepting that the bonkers failure case might eat some bounds tables seems like the simplest viable fix. This was also reported in the following kernel bugzilla entry: https://bugzilla.kernel.org/show_bug.cgi?id=203123 There are some reports that this commit triggered this bug: dd2283f2605 ("mm: mmap: zap pages with read mmap_sem in munmap") While that commit certainly made the issues easier to hit, I believe the fundamental issue has been with us as long as MPX itself, thus the Fixes: tag below is for one of the original MPX commits. [ mingo: Minor edits to the changelog and the patch. ] Reported-by: Richard Biener <rguenther@suse.de> Reported-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Yang Shi <yang.shi@linux.alibaba.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: linux-arch@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-um@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Cc: stable@vger.kernel.org Fixes: dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap") Link: http://lkml.kernel.org/r/20190419194747.5E1AD6DC@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-30x86/mm: Save debug registers when loading a temporary mmNadav Amit
Prevent user watchpoints from mistakenly firing while the temporary mm is being used. As the addresses of the temporary mm might overlap those of the user-process, this is necessary to prevent wrong signals or worse things from happening. Signed-off-by: Nadav Amit <namit@vmware.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <akpm@linux-foundation.org> Cc: <ard.biesheuvel@linaro.org> Cc: <deneen.t.dock@intel.com> Cc: <kernel-hardening@lists.openwall.com> Cc: <kristen@linux.intel.com> Cc: <linux_dti@icloud.com> Cc: <will.deacon@arm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190426001143.4983-5-namit@vmware.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-30x86/mm: Introduce temporary mm structsAndy Lutomirski
Using a dedicated page-table for temporary PTEs prevents other cores from using - even speculatively - these PTEs, thereby providing two benefits: (1) Security hardening: an attacker that gains kernel memory writing abilities cannot easily overwrite sensitive data. (2) Avoiding TLB shootdowns: the PTEs do not need to be flushed in remote page-tables. To do so a temporary mm_struct can be used. Mappings which are private for this mm can be set in the userspace part of the address-space. During the whole time in which the temporary mm is loaded, interrupts must be disabled. The first use-case for temporary mm struct, which will follow, is for poking the kernel text. [ Commit message was written by Nadav Amit ] Tested-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Nadav Amit <namit@vmware.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: <akpm@linux-foundation.org> Cc: <ard.biesheuvel@linaro.org> Cc: <deneen.t.dock@intel.com> Cc: <kernel-hardening@lists.openwall.com> Cc: <kristen@linux.intel.com> Cc: <linux_dti@icloud.com> Cc: <will.deacon@arm.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190426001143.4983-4-namit@vmware.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-01-15x86/pkeys: Properly copy pkey state at fork()Dave Hansen
Memory protection key behavior should be the same in a child as it was in the parent before a fork. But, there is a bug that resets the state in the child at fork instead of preserving it. The creation of new mm's is a bit convoluted. At fork(), the code does: 1. memcpy() the parent mm to initialize child 2. mm_init() to initalize some select stuff stuff 3. dup_mmap() to create true copies that memcpy() did not do right For pkeys two bits of state need to be preserved across a fork: 'execute_only_pkey' and 'pkey_allocation_map'. Those are preserved by the memcpy(), but mm_init() invokes init_new_context() which overwrites 'execute_only_pkey' and 'pkey_allocation_map' with "new" values. The author of the code erroneously believed that init_new_context is *only* called at execve()-time. But, alas, init_new_context() is used at execve() and fork(). The result is that, after a fork(), the child's pkey state ends up looking like it does after an execve(), which is totally wrong. pkeys that are already allocated can be allocated again, for instance. To fix this, add code called by dup_mmap() to copy the pkey state from parent to child explicitly. Also add a comment above init_new_context() to make it more clear to the next poor sod what this code is used for. Fixes: e8c24d3a23a ("x86/pkeys: Allocation/free syscalls") Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: bp@alien8.de Cc: hpa@zytor.com Cc: peterz@infradead.org Cc: mpe@ellerman.id.au Cc: will.deacon@arm.com Cc: luto@kernel.org Cc: jroedel@suse.de Cc: stable@vger.kernel.org Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Will Deacon <will.deacon@arm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Joerg Roedel <jroedel@suse.de> Link: https://lkml.kernel.org/r/20190102215655.7A69518C@viggo.jf.intel.com
2018-09-03x86/paravirt: Move the Xen-only pv_mmu_ops under the PARAVIRT_XXL umbrellaJuergen Gross
Most of the paravirt ops defined in pv_mmu_ops are for Xen PV guests only. Define them only if CONFIG_PARAVIRT_XXL is set. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: xen-devel@lists.xenproject.org Cc: virtualization@lists.linux-foundation.org Cc: akataria@vmware.com Cc: rusty@rustcorp.com.au Cc: boris.ostrovsky@oracle.com Cc: hpa@zytor.com Link: https://lkml.kernel.org/r/20180828074026.820-15-jgross@suse.com
2018-07-20x86/ldt: Enable LDT user-mapping for PAEJoerg Roedel
This adds the needed special case for PAE to get the LDT mapped into the user page-table when PTI is enabled. The big difference to the other paging modes is that on PAE there is no full top-level PGD entry available for the LDT, but only a PMD entry. Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Pavel Machek <pavel@ucw.cz> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: linux-mm@kvack.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Waiman Long <llong@redhat.com> Cc: "David H . Gutteridge" <dhgutteridge@sympatico.ca> Cc: joro@8bytes.org Link: https://lkml.kernel.org/r/1531906876-13451-37-git-send-email-joro@8bytes.org
2018-06-07Merge tag 'powerpc-4.18-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - Support for split PMD page table lock on 64-bit Book3S (Power8/9). - Add support for HAVE_RELIABLE_STACKTRACE, so we properly support live patching again. - Add support for patching barrier_nospec in copy_from_user() and syscall entry. - A couple of fixes for our data breakpoints on Book3S. - A series from Nick optimising TLB/mm handling with the Radix MMU. - Numerous small cleanups to squash sparse/gcc warnings from Mathieu Malaterre. - Several series optimising various parts of the 32-bit code from Christophe Leroy. - Removal of support for two old machines, "SBC834xE" and "C2K" ("GEFanuc,C2K"), which is why the diffstat has so many deletions. And many other small improvements & fixes. There's a few out-of-area changes. Some minor ftrace changes OK'ed by Steve, and a fix to our powernv cpuidle driver. Then there's a series touching mm, x86 and fs/proc/task_mmu.c, which cleans up some details around pkey support. It was ack'ed/reviewed by Ingo & Dave and has been in next for several weeks. Thanks to: Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Al Viro, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Balbir Singh, Cédric Le Goater, Christophe Leroy, Christophe Lombard, Colin Ian King, Dave Hansen, Fabio Estevam, Finn Thain, Frederic Barrat, Gautham R. Shenoy, Haren Myneni, Hari Bathini, Ingo Molnar, Jonathan Neuschäfer, Josh Poimboeuf, Kamalesh Babulal, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Greer, Mathieu Malaterre, Matthew Wilcox, Michael Neuling, Michal Suchanek, Naveen N. Rao, Nicholas Piggin, Nicolai Stange, Olof Johansson, Paul Gortmaker, Paul Mackerras, Peter Rosin, Pridhiviraj Paidipeddi, Ram Pai, Rashmica Gupta, Ravi Bangoria, Russell Currey, Sam Bobroff, Samuel Mendoza-Jonas, Segher Boessenkool, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stewart Smith, Thiago Jung Bauermann, Torsten Duwe, Vaibhav Jain, Wei Yongjun, Wolfram Sang, Yisheng Xie, YueHaibing" * tag 'powerpc-4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (251 commits) powerpc/64s/radix: Fix missing ptesync in flush_cache_vmap cpuidle: powernv: Fix promotion from snooze if next state disabled powerpc: fix build failure by disabling attribute-alias warning in pci_32 ocxl: Fix missing unlock on error in afu_ioctl_enable_p9_wait() powerpc-opal: fix spelling mistake "Uniterrupted" -> "Uninterrupted" powerpc: fix spelling mistake: "Usupported" -> "Unsupported" powerpc/pkeys: Detach execute_only key on !PROT_EXEC powerpc/powernv: copy/paste - Mask SO bit in CR powerpc: Remove core support for Marvell mv64x60 hostbridges powerpc/boot: Remove core support for Marvell mv64x60 hostbridges powerpc/boot: Remove support for Marvell mv64x60 i2c controller powerpc/boot: Remove support for Marvell MPSC serial controller powerpc/embedded6xx: Remove C2K board support powerpc/lib: optimise PPC32 memcmp powerpc/lib: optimise 32 bits __clear_user() powerpc/time: inline arch_vtime_task_switch() powerpc/Makefile: set -mcpu=860 flag for the 8xx powerpc: Implement csum_ipv6_magic in assembly powerpc/32: Optimise __csum_partial() powerpc/lib: Adjust .balign inside string functions for PPC32 ...
2018-05-14x86/pkeys: Do not special case protection key 0Dave Hansen
mm_pkey_is_allocated() treats pkey 0 as unallocated. That is inconsistent with the manpages, and also inconsistent with mm->context.pkey_allocation_map. Stop special casing it and only disallow values that are actually bad (< 0). The end-user visible effect of this is that you can now use mprotect_pkey() to set pkey=0. This is a bit nicer than what Ram proposed[1] because it is simpler and removes special-casing for pkey 0. On the other hand, it does allow applications to pkey_free() pkey-0, but that's just a silly thing to do, so we are not going to protect against it. The scenario that could happen is similar to what happens if you free any other pkey that is in use: it might get reallocated later and used to protect some other data. The most likely scenario is that pkey-0 comes back from pkey_alloc(), an access-disable or write-disable bit is set in PKRU for it, and the next stack access will SIGSEGV. It's not horribly different from if you mprotect()'d your stack or heap to be unreadable or unwritable, which is generally very foolish, but also not explicitly prevented by the kernel. 1. http://lkml.kernel.org/r/1522112702-27853-1-git-send-email-linuxram@us.ibm.com Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org>p Cc: Dave Hansen <dave.hansen@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Ellermen <mpe@ellerman.id.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Cc: stable@vger.kernel.org Fixes: 58ab9a088dda ("x86/pkeys: Check against max pkey to avoid overflows") Link: http://lkml.kernel.org/r/20180509171358.47FD785E@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-09x86/pkeys: Move vma_pkey() into asm/pkeys.hMichael Ellerman
Move the last remaining pkey helper, vma_pkey() into asm/pkeys.h Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Dave Hansen <dave.hansen@intel.com>
2018-05-09mm/pkeys, powerpc, x86: Provide an empty vma_pkey() in linux/pkeys.hMichael Ellerman
Consolidate the pkey handling by providing a common empty definition of vma_pkey() in pkeys.h when CONFIG_ARCH_HAS_PKEYS=n. This also removes another entanglement of pkeys.h and asm/mmu_context.h. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Ram Pai <linuxram@us.ibm.com> Reviewed-by: Dave Hansen <dave.hansen@intel.com>
2018-03-27perf/x86: Update rdpmc_always_available static key to the modern APIDavidlohr Bueso
No changes in refcount semantics -- use DEFINE_STATIC_KEY_FALSE() for initialization and replace: static_key_slow_inc|dec() => static_branch_inc|dec() static_key_false() => static_branch_unlikely() Added a '_key' suffix to rdpmc_always_available, for better self-documentation. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Link: http://lkml.kernel.org/r/20180326210929.5244-5-dave@stgolabs.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-20x86/LDT: Avoid warning in 32-bit builds with older gccJan Beulich
BUG() doesn't always imply "no return", and hence should be followed by a return statement even if that's obviously (to a human) unreachable. Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/5A8AF2AA02000078001A91E9@prv-mh.provo.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-23x86/pti: Put the LDT in its own PGD if PTI is onAndy Lutomirski
With PTI enabled, the LDT must be mapped in the usermode tables somewhere. The LDT is per process, i.e. per mm. An earlier approach mapped the LDT on context switch into a fixmap area, but that's a big overhead and exhausted the fixmap space when NR_CPUS got big. Take advantage of the fact that there is an address space hole which provides a completely unused pgd. Use this pgd to manage per-mm LDT mappings. This has a down side: the LDT isn't (currently) randomized, and an attack that can write the LDT is instant root due to call gates (thanks, AMD, for leaving call gates in AMD64 but designing them wrong so they're only useful for exploits). This can be mitigated by making the LDT read-only or randomizing the mapping, either of which is strightforward on top of this patch. This will significantly slow down LDT users, but that shouldn't matter for important workloads -- the LDT is only used by DOSEMU(2), Wine, and very old libc implementations. [ tglx: Cleaned it up. ] Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@chromium.org> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-22x86/mm: Move the CR3 construction functions to tlbflush.hDave Hansen
For flushing the TLB, the ASID which has been programmed into the hardware must be known. That differs from what is in 'cpu_tlbstate'. Add functions to transform the 'cpu_tlbstate' values into to the one programmed into the hardware (CR3). It's not easy to include mmu_context.h into tlbflush.h, so just move the CR3 building over to tlbflush.h. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Cc: linux-mm@kvack.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-22x86/ldt: Prevent LDT inheritance on execThomas Gleixner
The LDT is inherited across fork() or exec(), but that makes no sense at all because exec() is supposed to start the process clean. The reason why this happens is that init_new_context_ldt() is called from init_new_context() which obviously needs to be called for both fork() and exec(). It would be surprising if anything relies on that behaviour, so it seems to be safe to remove that misfeature. Split the context initialization into two parts. Clear the LDT pointer and initialize the mutex from the general context init and move the LDT duplication to arch_dup_mmap() which is only called on fork(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: dan.j.williams@intel.com Cc: hughd@google.com Cc: keescook@google.com Cc: kirill.shutemov@linux.intel.com Cc: linux-mm@kvack.org Signed-off-by: Ingo Molnar <mingo@kernel.org>