| Age | Commit message (Collapse) | Author |
|---|
|
Resolve overlapping context conflict between this upstream fix:
d8010d4ba43e ("x86/bugs: Add a Transient Scheduler Attacks mitigation")
And this pending commit in tip:x86/cpu:
65f55a301766 ("x86/CPU/AMD: Add CPUID faulting support")
Conflicts:
arch/x86/kernel/cpu/amd.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Add CPUID faulting support on AMD using the same user interface.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/20250528213105.1149-1-bp@kernel.org
|
|
Add the required features detection glue to bugs.c et all in order to
support the TSA mitigation.
Co-developed-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
|
|
Pull more kvm updates from Paolo Bonzini:
Generic:
- Clean up locking of all vCPUs for a VM by using the *_nest_lock()
family of functions, and move duplicated code to virt/kvm/. kernel/
patches acked by Peter Zijlstra
- Add MGLRU support to the access tracking perf test
ARM fixes:
- Make the irqbypass hooks resilient to changes in the GSI<->MSI
routing, avoiding behind stale vLPI mappings being left behind. The
fix is to resolve the VGIC IRQ using the host IRQ (which is stable)
and nuking the vLPI mapping upon a routing change
- Close another VGIC race where vCPU creation races with VGIC
creation, leading to in-flight vCPUs entering the kernel w/o
private IRQs allocated
- Fix a build issue triggered by the recently added workaround for
Ampere's AC04_CPU_23 erratum
- Correctly sign-extend the VA when emulating a TLBI instruction
potentially targeting a VNCR mapping
- Avoid dereferencing a NULL pointer in the VGIC debug code, which
can happen if the device doesn't have any mapping yet
s390:
- Fix interaction between some filesystems and Secure Execution
- Some cleanups and refactorings, preparing for an upcoming big
series
x86:
- Wait for target vCPU to ack KVM_REQ_UPDATE_PROTECTED_GUEST_STATE
to fix a race between AP destroy and VMRUN
- Decrypt and dump the VMSA in dump_vmcb() if debugging enabled for
the VM
- Refine and harden handling of spurious faults
- Add support for ALLOWED_SEV_FEATURES
- Add #VMGEXIT to the set of handlers special cased for
CONFIG_RETPOLINE=y
- Treat DEBUGCTL[5:2] as reserved to pave the way for virtualizing
features that utilize those bits
- Don't account temporary allocations in sev_send_update_data()
- Add support for KVM_CAP_X86_BUS_LOCK_EXIT on SVM, via Bus Lock
Threshold
- Unify virtualization of IBRS on nested VM-Exit, and cross-vCPU
IBPB, between SVM and VMX
- Advertise support to userspace for WRMSRNS and PREFETCHI
- Rescan I/O APIC routes after handling EOI that needed to be
intercepted due to the old/previous routing, but not the
new/current routing
- Add a module param to control and enumerate support for device
posted interrupts
- Fix a potential overflow with nested virt on Intel systems running
32-bit kernels
- Flush shadow VMCSes on emergency reboot
- Add support for SNP to the various SEV selftests
- Add a selftest to verify fastops instructions via forced emulation
- Refine and optimize KVM's software processing of the posted
interrupt bitmap, and share the harvesting code between KVM and the
kernel's Posted MSI handler"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (93 commits)
rtmutex_api: provide correct extern functions
KVM: arm64: vgic-debug: Avoid dereferencing NULL ITE pointer
KVM: arm64: vgic-init: Plug vCPU vs. VGIC creation race
KVM: arm64: Unmap vLPIs affected by changes to GSI routing information
KVM: arm64: Resolve vLPI by host IRQ in vgic_v4_unset_forwarding()
KVM: arm64: Protect vLPI translation with vgic_irq::irq_lock
KVM: arm64: Use lock guard in vgic_v4_set_forwarding()
KVM: arm64: Mask out non-VA bits from TLBI VA* on VNCR invalidation
arm64: sysreg: Drag linux/kconfig.h to work around vdso build issue
KVM: s390: Simplify and move pv code
KVM: s390: Refactor and split some gmap helpers
KVM: s390: Remove unneeded srcu lock
s390: Remove unneeded includes
s390/uv: Improve splitting of large folios that cannot be split while dirty
s390/uv: Always return 0 from s390_wiggle_split_folio() if successful
s390/uv: Don't return 0 from make_hva_secure() if the operation was not successful
rust: add helper for mutex_trylock
RISC-V: KVM: use kvm_trylock_all_vcpus when locking all vCPUs
KVM: arm64: use kvm_trylock_all_vcpus when locking all vCPUs
x86: KVM: SVM: use kvm_lock_all_vcpus instead of a custom implementation
...
|
|
KVM SVM changes for 6.16:
- Wait for target vCPU to acknowledge KVM_REQ_UPDATE_PROTECTED_GUEST_STATE to
fix a race between AP destroy and VMRUN.
- Decrypt and dump the VMSA in dump_vmcb() if debugging enabled for the VM.
- Add support for ALLOWED_SEV_FEATURES.
- Add #VMGEXIT to the set of handlers special cased for CONFIG_RETPOLINE=y.
- Treat DEBUGCTL[5:2] as reserved to pave the way for virtualizing features
that utilize those bits.
- Don't account temporary allocations in sev_send_update_data().
- Add support for KVM_CAP_X86_BUS_LOCK_EXIT on SVM, via Bus Lock Threshold.
|
|
KVM x86 misc changes for 6.16:
- Unify virtualization of IBRS on nested VM-Exit, and cross-vCPU IBPB, between
SVM and VMX.
- Advertise support to userspace for WRMSRNS and PREFETCHI.
- Rescan I/O APIC routes after handling EOI that needed to be intercepted due
to the old/previous routing, but not the new/current routing.
- Add a module param to control and enumerate support for device posted
interrupts.
- Misc cleanups.
|
|
Pick up build fixes from upstream to make this tree more testable.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix SEV-SNP kdump bugs
- Update the email address of Alexey Makhalov in MAINTAINERS
- Add the CPU feature flag for the Zen6 microarchitecture
- Fix typo in system message
* tag 'x86-urgent-2025-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Remove duplicated word in warning message
x86/CPU/AMD: Add X86_FEATURE_ZEN6
x86/sev: Make sure pages are not skipped during kdump
x86/sev: Do not touch VMSA pages during SNP guest memory kdump
MAINTAINERS: Update Alexey Makhalov's email address
x86/sev: Fix operator precedence in GHCB_MSR_VMPL_REQ_LEVEL macro
|
|
Misbehaving guests can cause bus locks to degrade the performance of
the system. The Bus Lock Threshold feature can be used to address this
issue by providing capability to the hypervisor to limit guest's
ability to generate bus lock, thereby preventing system slowdown due
to performance penalities.
When the Bus Lock Threshold feature is enabled, the processor checks
the bus lock threshold count before executing the buslock and decides
whether to trigger bus lock exit or not.
The value of the bus lock threshold count '0' generates bus lock
exits, and if the value is greater than '0', the bus lock is executed
successfully and the bus lock threshold count is decremented.
Presence of the Bus Lock threshold feature is indicated via CPUID
function 0x8000000A_EDX[29].
Signed-off-by: Manali Shukla <manali.shukla@amd.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250502050346.14274-3-manali.shukla@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a synthetic feature flag for Zen6.
[ bp: Move the feature flag to a free slot and avoid future merge
conflicts from incoming stuff. ]
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250513204857.3376577-1-yazen.ghannam@amd.com
|
|
Conflicts:
Documentation/admin-guide/hw-vuln/index.rst
arch/x86/include/asm/cpufeatures.h
arch/x86/kernel/alternative.c
arch/x86/kernel/cpu/bugs.c
arch/x86/kernel/cpu/common.c
drivers/base/cpu.c
include/linux/cpu.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Prepare to resolve conflicts with an upstream series of fixes that conflict
with pending x86 changes:
6f5bf947bab0 Merge tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Ice Lake generation CPUs are not affected by guest/host isolation part of
ITS. If a user is only concerned about KVM guests, they can now choose a
new cmdline option "vmexit" that will not deploy the ITS mitigation when
CPU is not affected by guest/host isolation. This saves the performance
overhead of ITS mitigation on Ice Lake gen CPUs.
When "vmexit" option selected, if the CPU is affected by ITS guest/host
isolation, the default ITS mitigation is deployed.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
|
|
Due to ITS, indirect branches in the lower half of a cacheline may be
vulnerable to branch target injection attack.
Introduce ITS-safe thunks to patch indirect branches in the lower half of
cacheline with the thunk. Also thunk any eBPF generated indirect branches
in emit_indirect_jump().
Below category of indirect branches are not mitigated:
- Indirect branches in the .init section are not mitigated because they are
discarded after boot.
- Indirect branches that are explicitly marked retpoline-safe.
Note that retpoline also mitigates the indirect branches against ITS. This
is because the retpoline sequence fills an RSB entry before RET, and it
does not suffer from RSB-underflow part of the ITS.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
|
|
ITS bug in some pre-Alderlake Intel CPUs may allow indirect branches in the
first half of a cache line get predicted to a target of a branch located in
the second half of the cache line.
Set X86_BUG_ITS on affected CPUs. Mitigation to follow in later commits.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
|
|
Add CPU feature detection for "Allowed SEV Features" to allow the
Hypervisor to enforce that SEV-ES and SEV-SNP guest VMs cannot
enable features (via SEV_FEATURES) that the Hypervisor does not
support or wish to be enabled.
Signed-off-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Link: https://lore.kernel.org/r/20250310201603.1217954-2-kim.phillips@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The latest AMD platform has introduced a new instruction called PREFETCHI.
This instruction loads a cache line from a specified memory address into
the indicated data or instruction cache level, based on locality reference
hints.
Feature bit definition:
CPUID_Fn80000021_EAX [bit 20] - Indicates support for IC prefetch.
This feature is analogous to Intel's PREFETCHITI (CPUID.(EAX=7,ECX=1):EDX),
though the CPUID bit definitions differ between AMD and Intel.
Advertise support to userspace, as no additional enabling is necessary
(PREFETCHI can't be intercepted as there's no instruction specific behavior
that needs to be virtualize).
The feature is documented in Processor Programming Reference (PPR)
for AMD Family 1Ah Model 02h, Revision C1 (Link below).
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Signed-off-by: Babu Moger <babu.moger@amd.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/ee1c08fc400bb574a2b8f2c6a0bd9def10a29d35.1744130533.git.babu.moger@amd.com
[sean: rewrite shortlog to highlight the KVM functionality]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Per the APM [1]:
Some processors, identified by CPUID Fn8000_0008_EBX[IbrsSameMode]
(bit 19) = 1, provide additional speculation limits. For these
processors, when IBRS is set, indirect branch predictions are not
influenced by any prior indirect branches, regardless of mode (CPL
and guest/host) and regardless of whether the prior indirect branches
occurred before or after the setting of IBRS. This is referred to as
Same Mode IBRS.
Define this feature bit, which will be used by KVM to determine if an
IBPB is required on nested VM-exits in SVM.
[1] AMD64 Architecture Programmer's Manual Pub. 40332, Rev 4.08 - April
2024, Volume 2, 3.2.9 Speculation Control MSRs
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20250221163352.3818347-2-yosry.ahmed@linux.dev
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Old microcode is bad for users and for kernel developers.
For users, it exposes them to known fixed security and/or functional
issues. These obviously rarely result in instant dumpster fires in
every environment. But it is as important to keep your microcode up
to date as it is to keep your kernel up to date.
Old microcode also makes kernels harder to debug. A developer looking
at an oops need to consider kernel bugs, known CPU issues and unknown
CPU issues as possible causes. If they know the microcode is up to
date, they can mostly eliminate known CPU issues as the cause.
Make it easier to tell if CPU microcode is out of date. Add a list
of released microcode. If the loaded microcode is older than the
release, tell users in a place that folks can find it:
/sys/devices/system/cpu/vulnerabilities/old_microcode
Tell kernel kernel developers about it with the existing taint
flag:
TAINT_CPU_OUT_OF_SPEC
== Discussion ==
When a user reports a potential kernel issue, it is very common
to ask them to reproduce the issue on mainline. Running mainline,
they will (independently from the distro) acquire a more up-to-date
microcode version list. If their microcode is old, they will
get a warning about the taint and kernel developers can take that
into consideration when debugging.
Just like any other entry in "vulnerabilities/", users are free to
make their own assessment of their exposure.
== Microcode Revision Discussion ==
The microcode versions in the table were generated from the Intel
microcode git repo:
8ac9378a8487 ("microcode-20241112 Release")
which as of this writing lags behind the latest microcode-20250211.
It can be argued that the versions that the kernel picks to call "old"
should be a revision or two old. Which specific version is picked is
less important to me than picking *a* version and enforcing it.
This repository contains only microcode versions that Intel has deemed
to be OS-loadable. It is quite possible that the BIOS has loaded a
newer microcode than the latest in this repo. If this happens, the
system is considered to have new microcode, not old.
Specifically, the sysfs file and taint flag answer the question:
Is the CPU running on the latest OS-loadable microcode,
or something even later that the BIOS loaded?
In other words, Intel never publishes an authoritative list of CPUs
and latest microcode revisions. Until it does, this is the best that
Linux can do.
Also note that the "intel-ucode-defs.h" file is simple, ugly and
has lots of magic numbers. That's on purpose and should allow a
single file to be shared across lots of stable kernel regardless of if
they have the new "VFM" infrastructure or not. It was generated with
a dumb script.
== FAQ ==
Q: Does this tell me if my system is secure or insecure?
A: No. It only tells you if your microcode was old when the
system booted.
Q: Should the kernel warn if the microcode list itself is too old?
A: No. New kernels will get new microcode lists, both mainline
and stable. The only way to have an old list is to be running
an old kernel in which case you have bigger problems.
Q: Is this for security or functional issues?
A: Both.
Q: If a given microcode update only has functional problems but
no security issues, will it be considered old?
A: Yes. All microcode image versions within a microcode release
are treated identically. Intel appears to make security
updates without disclosing them in the release notes. Thus,
all updates are considered to be security-relevant.
Q: Who runs old microcode?
A: Anybody with an old distro. This happens all the time inside
of Intel where there are lots of weird systems in labs that
might not be getting regular distro updates and might also
be running rather exotic microcode images.
Q: If I update my microcode after booting will it stop saying
"Vulnerable"?
A: No. Just like all the other vulnerabilies, you need to
reboot before the kernel will reassess your vulnerability.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "Ahmed S. Darwish" <darwi@linutronix.de>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/all/20250421195659.CF426C07%40davehans-spike.ostc.intel.com
(cherry picked from commit 9127865b15eb0a1bd05ad7efe29489c44394bdc1)
|
|
Intel Advanced Performance Extensions (APX) introduce a new set of
general-purpose registers, managed as an extended state component via the
xstate management facility.
Before enabling this new xstate, define a feature flag to clarify the
dependency in xsave_cpuid_features[]. APX is enumerated under CPUID level
7 with EDX=1. Since this CPUID leaf is not yet allocated, place the flag
in a scattered feature word.
While this feature is intended only for userspace, exposing it via
/proc/cpuinfo is unnecessary. Instead, the existing arch_prctl(2)
mechanism with the ARCH_GET_XCOMP_SUPP option can be used to query the
feature availability.
Finally, clarify that APX depends on XSAVE.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250416021720.12305-2-chang.seok.bae@intel.com
|
|
Shorten X86_FEATURE_AMD_HETEROGENEOUS_CORES to X86_FEATURE_AMD_HTR_CORES
to make the last column aligned consistently in the whole file.
No functional changes.
Suggested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250415175410.2944032-4-xin@zytor.com
|
|
Shorten X86_FEATURE_CLEAR_BHB_LOOP_ON_VMEXIT to
X86_FEATURE_CLEAR_BHB_VMEXIT to make the last column aligned
consistently in the whole file.
There's no need to explain in the name what the mitigation does.
No functional changes.
Suggested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250415175410.2944032-3-xin@zytor.com
|
|
It is a special file with special formatting so remove one whitespace
damage and format newer defines like the rest.
No functional changes.
[ Xin: Do the same to tools/arch/x86/include/asm/cpufeatures.h. ]
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250415175410.2944032-2-xin@zytor.com
|
|
Whack this thing because:
- the "unknown" handling is done only for this vuln and not for the
others
- it doesn't do anything besides reporting things differently. It
doesn't apply any mitigations - it is simply causing unnecessary
complications to the code which don't bring anything besides
maintenance overhead to what is already a very nasty spaghetti pile
- all the currently unaffected CPUs can also be in "unknown" status so
there's no need for special handling here
so get rid of it.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: David Kaplan <david.kaplan@amd.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Link: https://lore.kernel.org/r/20250414150951.5345-1-bp@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
"Another set of improvements to the kernel's CRC (cyclic redundancy
check) code:
- Rework the CRC64 library functions to be directly optimized, like
what I did last cycle for the CRC32 and CRC-T10DIF library
functions
- Rewrite the x86 PCLMULQDQ-optimized CRC code, and add VPCLMULQDQ
support and acceleration for crc64_be and crc64_nvme
- Rewrite the riscv Zbc-optimized CRC code, and add acceleration for
crc_t10dif, crc64_be, and crc64_nvme
- Remove crc_t10dif and crc64_rocksoft from the crypto API, since
they are no longer needed there
- Rename crc64_rocksoft to crc64_nvme, as the old name was incorrect
- Add kunit test cases for crc64_nvme and crc7
- Eliminate redundant functions for calculating the Castagnoli CRC32,
settling on just crc32c()
- Remove unnecessary prompts from some of the CRC kconfig options
- Further optimize the x86 crc32c code"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (36 commits)
x86/crc: drop the avx10_256 functions and rename avx10_512 to avx512
lib/crc: remove unnecessary prompt for CONFIG_CRC64
lib/crc: remove unnecessary prompt for CONFIG_LIBCRC32C
lib/crc: remove unnecessary prompt for CONFIG_CRC8
lib/crc: remove unnecessary prompt for CONFIG_CRC7
lib/crc: remove unnecessary prompt for CONFIG_CRC4
lib/crc7: unexport crc7_be_syndrome_table
lib/crc_kunit.c: update comment in crc_benchmark()
lib/crc_kunit.c: add test and benchmark for crc7_be()
x86/crc32: optimize tail handling for crc32c short inputs
riscv/crc64: add Zbc optimized CRC64 functions
riscv/crc-t10dif: add Zbc optimized CRC-T10DIF function
riscv/crc32: reimplement the CRC32 functions using new template
riscv/crc: add "template" for Zbc optimized CRC functions
x86/crc: add ANNOTATE_NOENDBR to suppress objtool warnings
x86/crc32: improve crc32c_arch() code generation with clang
x86/crc64: implement crc64_be and crc64_nvme using new template
x86/crc-t10dif: implement crc_t10dif using new template
x86/crc32: implement crc32_le using new template
x86/crc: add "template" for [V]PCLMULQDQ based CRC functions
...
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Nested virtualization support for VGICv3, giving the nested
hypervisor control of the VGIC hardware when running an L2 VM
- Removal of 'late' nested virtualization feature register masking,
making the supported feature set directly visible to userspace
- Support for emulating FEAT_PMUv3 on Apple silicon, taking advantage
of an IMPLEMENTATION DEFINED trap that covers all PMUv3 registers
- Paravirtual interface for discovering the set of CPU
implementations where a VM may run, addressing a longstanding issue
of guest CPU errata awareness in big-little systems and
cross-implementation VM migration
- Userspace control of the registers responsible for identifying a
particular CPU implementation (MIDR_EL1, REVIDR_EL1, AIDR_EL1),
allowing VMs to be migrated cross-implementation
- pKVM updates, including support for tracking stage-2 page table
allocations in the protected hypervisor in the 'SecPageTable' stat
- Fixes to vPMU, ensuring that userspace updates to the vPMU after
KVM_RUN are reflected into the backing perf events
LoongArch:
- Remove unnecessary header include path
- Assume constant PGD during VM context switch
- Add perf events support for guest VM
RISC-V:
- Disable the kernel perf counter during configure
- KVM selftests improvements for PMU
- Fix warning at the time of KVM module removal
x86:
- Add support for aging of SPTEs without holding mmu_lock.
Not taking mmu_lock allows multiple aging actions to run in
parallel, and more importantly avoids stalling vCPUs. This includes
an implementation of per-rmap-entry locking; aging the gfn is done
with only a per-rmap single-bin spinlock taken, whereas locking an
rmap for write requires taking both the per-rmap spinlock and the
mmu_lock.
Note that this decreases slightly the accuracy of accessed-page
information, because changes to the SPTE outside aging might not
use atomic operations even if they could race against a clear of
the Accessed bit.
This is deliberate because KVM and mm/ tolerate false
positives/negatives for accessed information, and testing has shown
that reducing the latency of aging is far more beneficial to
overall system performance than providing "perfect" young/old
information.
- Defer runtime CPUID updates until KVM emulates a CPUID instruction,
to coalesce updates when multiple pieces of vCPU state are
changing, e.g. as part of a nested transition
- Fix a variety of nested emulation bugs, and add VMX support for
synthesizing nested VM-Exit on interception (instead of injecting
#UD into L2)
- Drop "support" for async page faults for protected guests that do
not set SEND_ALWAYS (i.e. that only want async page faults at CPL3)
- Bring a bit of sanity to x86's VM teardown code, which has
accumulated a lot of cruft over the years. Particularly, destroy
vCPUs before the MMU, despite the latter being a VM-wide operation
- Add common secure TSC infrastructure for use within SNP and in the
future TDX
- Block KVM_CAP_SYNC_REGS if guest state is protected. It does not
make sense to use the capability if the relevant registers are not
available for reading or writing
- Don't take kvm->lock when iterating over vCPUs in the suspend
notifier to fix a largely theoretical deadlock
- Use the vCPU's actual Xen PV clock information when starting the
Xen timer, as the cached state in arch.hv_clock can be stale/bogus
- Fix a bug where KVM could bleed PVCLOCK_GUEST_STOPPED across
different PV clocks; restrict PVCLOCK_GUEST_STOPPED to kvmclock, as
KVM's suspend notifier only accounts for kvmclock, and there's no
evidence that the flag is actually supported by Xen guests
- Clean up the per-vCPU "cache" of its reference pvclock, and instead
only track the vCPU's TSC scaling (multipler+shift) metadata (which
is moderately expensive to compute, and rarely changes for modern
setups)
- Don't write to the Xen hypercall page on MSR writes that are
initiated by the host (userspace or KVM) to fix a class of bugs
where KVM can write to guest memory at unexpected times, e.g.
during vCPU creation if userspace has set the Xen hypercall MSR
index to collide with an MSR that KVM emulates
- Restrict the Xen hypercall MSR index to the unofficial synthetic
range to reduce the set of possible collisions with MSRs that are
emulated by KVM (collisions can still happen as KVM emulates
Hyper-V MSRs, which also reside in the synthetic range)
- Clean up and optimize KVM's handling of Xen MSR writes and
xen_hvm_config
- Update Xen TSC leaves during CPUID emulation instead of modifying
the CPUID entries when updating PV clocks; there is no guarantee PV
clocks will be updated between TSC frequency changes and CPUID
emulation, and guest reads of the TSC leaves should be rare, i.e.
are not a hot path
x86 (Intel):
- Fix a bug where KVM unnecessarily reads XFD_ERR from hardware and
thus modifies the vCPU's XFD_ERR on a #NM due to CR0.TS=1
- Pass XFD_ERR as the payload when injecting #NM, as a preparatory
step for upcoming FRED virtualization support
- Decouple the EPT entry RWX protection bit macros from the EPT
Violation bits, both as a general cleanup and in anticipation of
adding support for emulating Mode-Based Execution Control (MBEC)
- Reject KVM_RUN if userspace manages to gain control and stuff
invalid guest state while KVM is in the middle of emulating nested
VM-Enter
- Add a macro to handle KVM's sanity checks on entry/exit VMCS
control pairs in anticipation of adding sanity checks for secondary
exit controls (the primary field is out of bits)
x86 (AMD):
- Ensure the PSP driver is initialized when both the PSP and KVM
modules are built-in (the initcall framework doesn't handle
dependencies)
- Use long-term pins when registering encrypted memory regions, so
that the pages are migrated out of MIGRATE_CMA/ZONE_MOVABLE and
don't lead to excessive fragmentation
- Add macros and helpers for setting GHCB return/error codes
- Add support for Idle HLT interception, which elides interception if
the vCPU has a pending, unmasked virtual IRQ when HLT is executed
- Fix a bug in INVPCID emulation where KVM fails to check for a
non-canonical address
- Don't attempt VMRUN for SEV-ES+ guests if the vCPU's VMSA is
invalid, e.g. because the vCPU was "destroyed" via SNP's AP
Creation hypercall
- Reject SNP AP Creation if the requested SEV features for the vCPU
don't match the VM's configured set of features
Selftests:
- Fix again the Intel PMU counters test; add a data load and do
CLFLUSH{OPT} on the data instead of executing code. The theory is
that modern Intel CPUs have learned new code prefetching tricks
that bypass the PMU counters
- Fix a flaw in the Intel PMU counters test where it asserts that an
event is counting correctly without actually knowing what the event
counts on the underlying hardware
- Fix a variety of flaws, bugs, and false failures/passes
dirty_log_test, and improve its coverage by collecting all dirty
entries on each iteration
- Fix a few minor bugs related to handling of stats FDs
- Add infrastructure to make vCPU and VM stats FDs available to tests
by default (open the FDs during VM/vCPU creation)
- Relax an assertion on the number of HLT exits in the xAPIC IPI test
when running on a CPU that supports AMD's Idle HLT (which elides
interception of HLT if a virtual IRQ is pending and unmasked)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (216 commits)
RISC-V: KVM: Optimize comments in kvm_riscv_vcpu_isa_disable_allowed
RISC-V: KVM: Teardown riscv specific bits after kvm_exit
LoongArch: KVM: Register perf callbacks for guest
LoongArch: KVM: Implement arch-specific functions for guest perf
LoongArch: KVM: Add stub for kvm_arch_vcpu_preempted_in_kernel()
LoongArch: KVM: Remove PGD saving during VM context switch
LoongArch: KVM: Remove unnecessary header include path
KVM: arm64: Tear down vGIC on failed vCPU creation
KVM: arm64: PMU: Reload when resetting
KVM: arm64: PMU: Reload when user modifies registers
KVM: arm64: PMU: Fix SET_ONE_REG for vPMC regs
KVM: arm64: PMU: Assume PMU presence in pmu-emul.c
KVM: arm64: PMU: Set raw values from user to PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
KVM: arm64: Create each pKVM hyp vcpu after its corresponding host vcpu
KVM: arm64: Factor out pKVM hyp vcpu creation to separate function
KVM: arm64: Initialize HCRX_EL2 traps in pKVM
KVM: arm64: Factor out setting HCRX_EL2 traps into separate function
KVM: x86: block KVM_CAP_SYNC_REGS if guest state is protected
KVM: x86: Add infrastructure for secure TSC
KVM: x86: Push down setting vcpu.arch.user_set_tsc
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 speculation mitigation updates from Borislav Petkov:
- Some preparatory work to convert the mitigations machinery to
mitigating attack vectors instead of single vulnerabilities
- Untangle and remove a now unneeded X86_FEATURE_USE_IBPB flag
- Add support for a Zen5-specific SRSO mitigation
- Cleanups and minor improvements
* tag 'x86_bugs_for_v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Make spectre user default depend on MITIGATION_SPECTRE_V2
x86/bugs: Use the cpu_smt_possible() helper instead of open-coded code
x86/bugs: Add AUTO mitigations for mds/taa/mmio/rfds
x86/bugs: Relocate mds/taa/mmio/rfds defines
x86/bugs: Add X86_BUG_SPECTRE_V2_USER
x86/bugs: Remove X86_FEATURE_USE_IBPB
KVM: nVMX: Always use IBPB to properly virtualize IBRS
x86/bugs: Use a static branch to guard IBPB on vCPU switch
x86/bugs: Remove the X86_FEATURE_USE_IBPB check in ib_prctl_set()
x86/mm: Remove X86_FEATURE_USE_IBPB checks in cond_mitigation()
x86/bugs: Move the X86_FEATURE_USE_IBPB check into callers
x86/bugs: KVM: Add support for SRSO_MSR_FIX
|
|
config
Introduce an AWK script to auto-generate the <asm/cpufeaturemasks.h> header
with required and disabled feature masks based on <asm/cpufeatures.h>
and the current build config.
Thus for any CPU feature with a build config, e.g., X86_FRED, simply add:
config X86_DISABLED_FEATURE_FRED
def_bool y
depends on !X86_FRED
to arch/x86/Kconfig.cpufeatures, instead of adding a conditional CPU
feature disable flag, e.g., DISABLE_FRED.
Lastly, the generated required and disabled feature masks will be added to
their corresponding feature masks for this particular compile-time
configuration.
[ Xin: build integration improvements ]
[ mingo: Improved changelog and comments ]
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250305184725.3341760-3-xin@zytor.com
|
|
In addition, the CPU advertises the maximum number of pages that can be
shot down with one INVLPGB instruction in CPUID. Save that information
for later use.
[ bp: use cpu_has(), typos, massage. ]
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226030129.530345-3-riel@surriel.com
|
|
All CPU vulnerabilities with command line options map to a single X86_BUG bit
except for Spectre V2 where both the spectre_v2 and spectre_v2_user command
line options are related to the same bug.
The spectre_v2 command line options mostly relate to user->kernel and
guest->host mitigations, while the spectre_v2_user command line options relate
to user->user or guest->guest protections.
Define a new X86_BUG bit for spectre_v2_user so each *_select_mitigation()
function in bugs.c is related to a unique X86_BUG bit.
No functional changes.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250108202515.385902-2-david.kaplan@amd.com
|
|
X86_FEATURE_USE_IBPB was introduced in:
2961298efe1e ("x86/cpufeatures: Clean up Spectre v2 related CPUID flags")
to have separate flags for when the CPU supports IBPB (i.e. X86_FEATURE_IBPB)
and when an IBPB is actually used to mitigate Spectre v2.
Ever since then, the uses of IBPB expanded. The name became confusing
because it does not control all IBPB executions in the kernel.
Furthermore, because its name is generic and it's buried within
indirect_branch_prediction_barrier(), it's easy to use it not knowing
that it is specific to Spectre v2.
X86_FEATURE_USE_IBPB is no longer needed because all the IBPB executions
it used to control are now controlled through other means (e.g.
switch_mm_*_ibpb static branches).
Remove the unused feature bit.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20250227012712.3193063-7-yosry.ahmed@linux.dev
|
|
Add support for
CPUID Fn8000_0021_EAX[31] (SRSO_MSR_FIX). If this bit is 1, it
indicates that software may use MSR BP_CFG[BpSpecReduce] to mitigate
SRSO.
Enable BpSpecReduce to mitigate SRSO across guest/host boundaries.
Switch back to enabling the bit when virtualization is enabled and to
clear the bit when virtualization is disabled because using a MSR slot
would clear the bit when the guest is exited and any training the guest
has done, would potentially influence the host kernel when execution
enters the kernel and hasn't VMRUN the guest yet.
More detail on the public thread in Link below.
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241202120416.6054-1-bp@kernel.org
|
|
The Idle HLT Intercept feature allows for the HLT instruction
execution by a vCPU to be intercepted by the hypervisor only if there
are no pending events (V_INTR and V_NMI) for the vCPU. When the vCPU
is expected to service the pending events (V_INTR and V_NMI), the Idle
HLT intercept won’t trigger. The feature allows the hypervisor to
determine if the vCPU is idle and reduces wasteful VMEXITs.
In addition to the aforementioned use case, the Idle HLT intercept
feature is also used for enlightened guests who aim to securely manage
events without the hypervisor’s awareness. If a HLT occurs while
a virtual event is pending and the hypervisor is unaware of this
pending event (as could be the case with enlightened guests), the
absence of the Idle HLT intercept feature could result in a vCPU being
suspended indefinitely.
Presence of Idle HLT intercept feature for guests is indicated via CPUID
function 0x8000000A_EDX[30].
Signed-off-by: Manali Shukla <Manali.Shukla@amd.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250128124812.7324-2-manali.shukla@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Lift zmm_exclusion_list in aesni-intel_glue.c into the x86 CPU setup
code, and add a new x86 CPU feature flag X86_FEATURE_PREFER_YMM that is
set when the CPU is on this list.
This allows other code in arch/x86/, such as the CRC library code, to
apply the same exclusion list when deciding whether to execute 256-bit
or 512-bit optimized functions.
Note that full AVX512 support including ZMM registers is still exposed
to userspace and is still supported for in-kernel use. This flag just
indicates whether in-kernel code should prefer to use YMM registers.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250210174540.161705-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
"Miscellaneous x86 cleanups and typo fixes, and also the removal of
the 'disablelapic' boot parameter"
* tag 'x86-cleanups-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioapic: Remove a stray tab in the IO-APIC type string
x86/cpufeatures: Remove "AMD" from the comments to the AMD-specific leaf
Documentation/kernel-parameters: Fix a typo in kvm.enable_virt_at_load text
x86/cpu: Fix typo in x86_match_cpu()'s doc
x86/apic: Remove "disablelapic" cmdline option
Documentation: Merge x86-specific boot options doc into kernel-parameters.txt
x86/ioremap: Remove unused size parameter in remapping functions
x86/ioremap: Simplify setup_data mapping variants
x86/boot/compressed: Remove unused header includes from kaslr.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Borislav Petkov:
- Remove the less generic CPU matching infra around struct x86_cpu_desc
and use the generic struct x86_cpu_id thing
- Remove magic naked numbers for CPUID functions and use proper defines
of the prefix CPUID_LEAF_*. Consolidate some of the crazy use around
the tree
- Smaller cleanups and improvements
* tag 'x86_cpu_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Make all all CPUID leaf names consistent
x86/fpu: Remove unnecessary CPUID level check
x86/fpu: Move CPUID leaf definitions to common code
x86/tsc: Remove CPUID "frequency" leaf magic numbers.
x86/tsc: Move away from TSC leaf magic numbers
x86/cpu: Move TSC CPUID leaf definition
x86/cpu: Refresh DCA leaf reading code
x86/cpu: Remove unnecessary MwAIT leaf checks
x86/cpu: Use MWAIT leaf definition
x86/cpu: Move MWAIT leaf definition to common header
x86/cpu: Remove 'x86_cpu_desc' infrastructure
x86/cpu: Move AMD erratum 1386 table over to 'x86_cpu_id'
x86/cpu: Replace PEBS use of 'x86_cpu_desc' use with 'x86_cpu_id'
x86/cpu: Expose only stepping min/max interface
x86/cpu: Introduce new microcode matching helper
x86/cpufeature: Document cpu_feature_enabled() as the default to use
x86/paravirt: Remove the WBINVD callback
x86/cpufeatures: Free up unused feature bits
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- A segmented Reverse Map table (RMP) is a across-nodes distributed
table of sorts which contains per-node descriptors of each node-local
4K page, denoting its ownership (hypervisor, guest, etc) in the realm
of confidential computing. Add support for such a table in order to
improve referential locality when accessing or modifying RMP table
entries
- Add support for reading the TSC in SNP guests by removing any
interference or influence the hypervisor might have, with the goal of
making a confidential guest even more independent from the hypervisor
* tag 'x86_sev_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Add the Secure TSC feature for SNP guests
x86/tsc: Init the TSC for Secure TSC guests
x86/sev: Mark the TSC in a secure TSC guest as reliable
x86/sev: Prevent RDTSC/RDTSCP interception for Secure TSC enabled guests
x86/sev: Prevent GUEST_TSC_FREQ MSR interception for Secure TSC enabled guests
x86/sev: Change TSC MSR behavior for Secure TSC enabled guests
x86/sev: Add Secure TSC support for SNP guests
x86/sev: Relocate SNP guest messaging routines to common code
x86/sev: Carve out and export SNP guest messaging init routines
virt: sev-guest: Replace GFP_KERNEL_ACCOUNT with GFP_KERNEL
virt: sev-guest: Remove is_vmpck_empty() helper
x86/sev/docs: Document the SNP Reverse Map Table (RMP)
x86/sev: Add full support for a segmented RMP table
x86/sev: Treat the contiguous RMP table as a single RMP segment
x86/sev: Map only the RMP table entries instead of the full RMP range
x86/sev: Move the SNP probe routine out of the way
x86/sev: Require the RMPREAD instruction after Zen4
x86/sev: Add support for the RMPREAD instruction
x86/sev: Prepare for using the RMPREAD instruction to access the RMP
|
|
0x8000001f.EAX is an AMD-specific leaf so there's no need to have "AMD"
in almost every feature's comment. Zap it and make the text more
readable this way.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241122210707.12742-1-bp@kernel.org
|
|
If the machine has:
CPUID Fn8000_0021_EAX[30] (SRSO_USER_KERNEL_NO) -- If this bit is 1,
it indicates the CPU is not subject to the SRSO vulnerability across
user/kernel boundaries.
have it fall back to IBPB on VMEXIT only, in the case it is going to run
VMs:
Speculative Return Stack Overflow: Mitigation: IBPB on VMEXIT only
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20241202120416.6054-2-bp@kernel.org
|
|
On SNP-enabled system, VMRUN marks AVIC Backing Page as in-use while
the guest is running for both secure and non-secure guest. Any hypervisor
write to the in-use vCPU's AVIC backing page (e.g. to inject an interrupt)
will generate unexpected #PF in the host.
Currently, attempt to run AVIC guest would result in the following error:
BUG: unable to handle page fault for address: ff3a442e549cc270
#PF: supervisor write access in kernel mode
#PF: error_code(0x80000003) - RMP violation
PGD b6ee01067 P4D b6ee02067 PUD 10096d063 PMD 11c540063 PTE 80000001149cc163
SEV-SNP: PFN 0x1149cc unassigned, dumping non-zero entries in 2M PFN region: [0x114800 - 0x114a00]
...
Newer AMD system is enhanced to allow hypervisor to modify the backing page
for non-secure guest on SNP-enabled system. This enhancement is available
when the CPUID Fn8000_001F_EAX bit 30 is set (HvInUseWrAllowed).
This table describes AVIC support matrix w.r.t. SNP enablement:
| Non-SNP system | SNP system
-----------------------------------------------------
Non-SNP guest | AVIC Activate | AVIC Activate iff
| | HvInuseWrAllowed=1
-----------------------------------------------------
SNP guest | N/A | Secure AVIC
Therefore, check and disable AVIC in kvm_amd driver when the feature is not
available on SNP-enabled system.
See the AMD64 Architecture Programmer’s Manual (APM) Volume 2 for detail.
(https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/
programmer-references/40332.pdf)
Fixes: 216d106c7ff7 ("x86/sev: Add SEV-SNP host initialization support")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20241104075845.7583-1-suravee.suthikulpanit@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
A segmented RMP table allows for improved locality of reference between
the memory protected by the RMP and the RMP entries themselves.
Add support to detect and initialize a segmented RMP table with multiple
segments as configured by the system BIOS. While the RMPREAD instruction
will be used to read an RMP entry in a segmented RMP, initialization and
debugging capabilities will require the mapping of the segments.
The RMP_CFG MSR indicates if segmented RMP support is enabled and, if
enabled, the amount of memory that an RMP segment covers. When segmented
RMP support is enabled, the RMP_BASE MSR points to the start of the RMP
bookkeeping area, which is 16K in size. The RMP Segment Table (RST) is
located immediately after the bookkeeping area and is 4K in size. The RST
contains up to 512 8-byte entries that identify the location of the RMP
segment and amount of memory mapped by the segment (which must be less
than or equal to the configured segment size). The physical address that
is covered by a segment is based on the segment size and the index of the
segment in the RST. The RMP entry for a physical address is based on the
offset within the segment.
For example, if the segment size is 64GB (0x1000000000 or 1 << 36), then
physical address 0x9000800000 is RST entry 9 (0x9000800000 >> 36) and
RST entry 9 covers physical memory 0x9000000000 to 0x9FFFFFFFFF.
The RMP entry index within the RMP segment is the physical address
AND-ed with the segment mask, 64GB - 1 (0xFFFFFFFFF), and then
right-shifted 12 bits or PHYS_PFN(0x9000800000 & 0xFFFFFFFFF), which
is 0x800.
CPUID 0x80000025_EBX[9:0] describes the number of RMP segments that can
be cached by the hardware. Additionally, if CPUID 0x80000025_EBX[10] is
set, then the number of actual RMP segments defined cannot exceed the
number of RMP segments that can be cached and can be used as a maximum
RST index.
[ bp: Unify printk hex format specifiers. ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikunj A Dadhania <nikunj@amd.com>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Link: https://lore.kernel.org/r/02afd0ffd097a19cb6e5fb1bb76eb110496c5b11.1734101742.git.thomas.lendacky@amd.com
|
|
The RMPREAD instruction returns an architecture defined format of an
RMP table entry. This is the preferred method for examining RMP entries.
The instruction is advertised in CPUID 0x8000001f_EAX[21]. Use this
instruction when available.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikunj A Dadhania <nikunj@amd.com>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Reviewed-by: Ashish Kalra <ashish.kalra@amd.com>
Link: https://lore.kernel.org/r/72c734ac8b324bbc0c839b2c093a11af4a8881fa.1733172653.git.thomas.lendacky@amd.com
|
|
Linux defined feature bits X86_FEATURE_P3 and X86_FEATURE_P4 are not
used anywhere. Commit f31d731e4467 ("x86: use X86_FEATURE_NOPL in
alternatives") got rid of the last usage in 2008. Remove the related
mappings and code.
Just like all X86_FEATURE bits, the raw bit numbers can be exposed to
userspace via MODULE_DEVICE_TABLE(). There is a very small theoretical
chance of userspace getting confused if these bits got reassigned and
changed logical meaning. But these bits were never used for a device
table, so it's highly unlikely this will ever happen in practice.
[ dhansen: clarify userspace visibility of these bits ]
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/20241107233000.2742619-1-sohil.mehta%40intel.com
|
|
Pull kvm updates from Paolo Bonzini:
"The biggest change here is eliminating the awful idea that KVM had of
essentially guessing which pfns are refcounted pages.
The reason to do so was that KVM needs to map both non-refcounted
pages (for example BARs of VFIO devices) and VM_PFNMAP/VM_MIXMEDMAP
VMAs that contain refcounted pages.
However, the result was security issues in the past, and more recently
the inability to map VM_IO and VM_PFNMAP memory that _is_ backed by
struct page but is not refcounted. In particular this broke virtio-gpu
blob resources (which directly map host graphics buffers into the
guest as "vram" for the virtio-gpu device) with the amdgpu driver,
because amdgpu allocates non-compound higher order pages and the tail
pages could not be mapped into KVM.
This requires adjusting all uses of struct page in the
per-architecture code, to always work on the pfn whenever possible.
The large series that did this, from David Stevens and Sean
Christopherson, also cleaned up substantially the set of functions
that provided arch code with the pfn for a host virtual addresses.
The previous maze of twisty little passages, all different, is
replaced by five functions (__gfn_to_page, __kvm_faultin_pfn, the
non-__ versions of these two, and kvm_prefetch_pages) saving almost
200 lines of code.
ARM:
- Support for stage-1 permission indirection (FEAT_S1PIE) and
permission overlays (FEAT_S1POE), including nested virt + the
emulated page table walker
- Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This
call was introduced in PSCIv1.3 as a mechanism to request
hibernation, similar to the S4 state in ACPI
- Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As
part of it, introduce trivial initialization of the host's MPAM
context so KVM can use the corresponding traps
- PMU support under nested virtualization, honoring the guest
hypervisor's trap configuration and event filtering when running a
nested guest
- Fixes to vgic ITS serialization where stale device/interrupt table
entries are not zeroed when the mapping is invalidated by the VM
- Avoid emulated MMIO completion if userspace has requested
synchronous external abort injection
- Various fixes and cleanups affecting pKVM, vCPU initialization, and
selftests
LoongArch:
- Add iocsr and mmio bus simulation in kernel.
- Add in-kernel interrupt controller emulation.
- Add support for virtualization extensions to the eiointc irqchip.
PPC:
- Drop lingering and utterly obsolete references to PPC970 KVM, which
was removed 10 years ago.
- Fix incorrect documentation references to non-existing ioctls
RISC-V:
- Accelerate KVM RISC-V when running as a guest
- Perf support to collect KVM guest statistics from host side
s390:
- New selftests: more ucontrol selftests and CPU model sanity checks
- Support for the gen17 CPU model
- List registers supported by KVM_GET/SET_ONE_REG in the
documentation
x86:
- Cleanup KVM's handling of Accessed and Dirty bits to dedup code,
improve documentation, harden against unexpected changes.
Even if the hardware A/D tracking is disabled, it is possible to
use the hardware-defined A/D bits to track if a PFN is Accessed
and/or Dirty, and that removes a lot of special cases.
- Elide TLB flushes when aging secondary PTEs, as has been done in
x86's primary MMU for over 10 years.
- Recover huge pages in-place in the TDP MMU when dirty page logging
is toggled off, instead of zapping them and waiting until the page
is re-accessed to create a huge mapping. This reduces vCPU jitter.
- Batch TLB flushes when dirty page logging is toggled off. This
reduces the time it takes to disable dirty logging by ~3x.
- Remove the shrinker that was (poorly) attempting to reclaim shadow
page tables in low-memory situations.
- Clean up and optimize KVM's handling of writes to
MSR_IA32_APICBASE.
- Advertise CPUIDs for new instructions in Clearwater Forest
- Quirk KVM's misguided behavior of initialized certain feature MSRs
to their maximum supported feature set, which can result in KVM
creating invalid vCPU state. E.g. initializing PERF_CAPABILITIES to
a non-zero value results in the vCPU having invalid state if
userspace hides PDCM from the guest, which in turn can lead to
save/restore failures.
- Fix KVM's handling of non-canonical checks for vCPUs that support
LA57 to better follow the "architecture", in quotes because the
actual behavior is poorly documented. E.g. most MSR writes and
descriptor table loads ignore CR4.LA57 and operate purely on
whether the CPU supports LA57.
- Bypass the register cache when querying CPL from kvm_sched_out(),
as filling the cache from IRQ context is generally unsafe; harden
the cache accessors to try to prevent similar issues from occuring
in the future. The issue that triggered this change was already
fixed in 6.12, but was still kinda latent.
- Advertise AMD_IBPB_RET to userspace, and fix a related bug where
KVM over-advertises SPEC_CTRL when trying to support cross-vendor
VMs.
- Minor cleanups
- Switch hugepage recovery thread to use vhost_task.
These kthreads can consume significant amounts of CPU time on
behalf of a VM or in response to how the VM behaves (for example
how it accesses its memory); therefore KVM tried to place the
thread in the VM's cgroups and charge the CPU time consumed by that
work to the VM's container.
However the kthreads did not process SIGSTOP/SIGCONT, and therefore
cgroups which had KVM instances inside could not complete freezing.
Fix this by replacing the kthread with a PF_USER_WORKER thread, via
the vhost_task abstraction. Another 100+ lines removed, with
generally better behavior too like having these threads properly
parented in the process tree.
- Revert a workaround for an old CPU erratum (Nehalem/Westmere) that
didn't really work; there was really nothing to work around anyway:
the broken patch was meant to fix nested virtualization, but the
PERF_GLOBAL_CTRL MSR is virtualized and therefore unaffected by the
erratum.
- Fix 6.12 regression where CONFIG_KVM will be built as a module even
if asked to be builtin, as long as neither KVM_INTEL nor KVM_AMD is
'y'.
x86 selftests:
- x86 selftests can now use AVX.
Documentation:
- Use rST internal links
- Reorganize the introduction to the API document
Generic:
- Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock
instead of RCU, so that running a vCPU on a different task doesn't
encounter long due to having to wait for all CPUs become quiescent.
In general both reads and writes are rare, but userspace that
supports confidential computing is introducing the use of "helper"
vCPUs that may jump from one host processor to another. Those will
be very happy to trigger a synchronize_rcu(), and the effect on
performance is quite the disaster"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (298 commits)
KVM: x86: Break CONFIG_KVM_X86's direct dependency on KVM_INTEL || KVM_AMD
KVM: x86: add back X86_LOCAL_APIC dependency
Revert "KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of setup_vmcs_config()"
KVM: x86: switch hugepage recovery thread to vhost_task
KVM: x86: expose MSR_PLATFORM_INFO as a feature MSR
x86: KVM: Advertise CPUIDs for new instructions in Clearwater Forest
Documentation: KVM: fix malformed table
irqchip/loongson-eiointc: Add virt extension support
LoongArch: KVM: Add irqfd support
LoongArch: KVM: Add PCHPIC user mode read and write functions
LoongArch: KVM: Add PCHPIC read and write functions
LoongArch: KVM: Add PCHPIC device support
LoongArch: KVM: Add EIOINTC user mode read and write functions
LoongArch: KVM: Add EIOINTC read and write functions
LoongArch: KVM: Add EIOINTC device support
LoongArch: KVM: Add IPI user mode read and write function
LoongArch: KVM: Add IPI read and write function
LoongArch: KVM: Add IPI device support
LoongArch: KVM: Add iocsr and mmio bus simulation in kernel
KVM: arm64: Pass on SVE mapping failures
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Borislav Petkov:
- Add a feature flag which denotes AMD CPUs supporting workload
classification with the purpose of using such hints when making
scheduling decisions
- Determine the boost enumerator for each AMD core based on its type:
efficiency or performance, in the cppc driver
- Add the type of a CPU to the topology CPU descriptor with the goal of
supporting and making decisions based on the type of the respective
core
- Add a feature flag to denote AMD cores which have heterogeneous
topology and enable SD_ASYM_PACKING for those
- Check microcode revisions before disabling PCID on Intel
- Cleanups and fixlets
* tag 'x86_cpu_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Remove redundant CONFIG_NUMA guard around numa_add_cpu()
x86/cpu: Fix FAM5_QUARK_X1000 to use X86_MATCH_VFM()
x86/cpu: Fix formatting of cpuid_bits[] in scattered.c
x86/cpufeatures: Add X86_FEATURE_AMD_WORKLOAD_CLASS feature bit
x86/amd: Use heterogeneous core topology for identifying boost numerator
x86/cpu: Add CPU type to struct cpuinfo_topology
x86/cpu: Enable SD_ASYM_PACKING for PKG domain on AMD
x86/cpufeatures: Add X86_FEATURE_AMD_HETEROGENEOUS_CORES
x86/cpufeatures: Rename X86_FEATURE_FAST_CPPC to have AMD prefix
x86/mm: Don't disable PCID when INVLPG has been fixed by microcode
|
|
Latest Intel platform Clearwater Forest has introduced new instructions
enumerated by CPUIDs of SHA512, SM3, SM4 and AVX-VNNI-INT16. Advertise
these CPUIDs to userspace so that guests can query them directly.
SHA512, SM3 and SM4 are on an expected-dense CPUID leaf and some other
bits on this leaf have kernel usages. Considering they have not truly
kernel usages, hide them in /proc/cpuinfo.
These new instructions only operate in xmm, ymm registers and have no new
VMX controls, so there is no additional host enabling required for guests
to use these instructions, i.e. advertising these CPUIDs to userspace is
safe.
Tested-by: Jiaan Lu <jiaan.lu@intel.com>
Tested-by: Xuelian Guo <xuelian.guo@intel.com>
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Message-ID: <20241105054825.870939-1-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a new feature bit that indicates support for workload-based heuristic
feedback to OS for scheduling decisions.
When the bit set, threads are classified during runtime into enumerated
classes. The classes represent thread performance/power characteristics
that may benefit from special scheduling behaviors.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20241028020251.8085-4-mario.limonciello@amd.com
|
|
CPUID leaf 0x80000026 advertises core types with different efficiency
rankings.
Bit 30 indicates the heterogeneous core topology feature, if the bit
set, it means not all instances at the current hierarchical level have
the same core topology.
This is described in the AMD64 Architecture Programmers Manual Volume
2 and 3, doc ID #25493 and #25494.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241025171459.1093-3-mario.limonciello@amd.com
|
|
This feature is an AMD unique feature of some processors, so put
AMD into the name.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241025171459.1093-2-mario.limonciello@amd.com
|
|
Set this flag if the CPU has an IBPB implementation that does not
invalidate return target predictions. Zen generations < 4 do not flush
the RSB when executing an IBPB and this bug flag denotes that.
[ bp: Massage. ]
Signed-off-by: Johannes Wikner <kwikner@ethz.ch>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
|
