summaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/embedded6xx
AgeCommit message (Collapse)Author
2025-05-16powerpc: Switch to irq_find_mapping()Jiri Slaby (SUSE)
irq_linear_revmap() is deprecated, so remove all its uses and supersede them by an identical call to irq_find_mapping(). [ tglx: Fix up subject prefix ] Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu> # for 8xx Link: https://lore.kernel.org/all/20250319092951.37667-42-jirislaby@kernel.org
2025-05-16powerpc: Switch to irq_domain_create_*()Jiri Slaby (SUSE)
irq_domain_add_*() interfaces are going away as being obsolete now. Switch to the preferred irq_domain_create_*() ones. Those differ in the node parameter: They take more generic struct fwnode_handle instead of struct device_node. Therefore, of_fwnode_handle() is added around the original parameter. Note some of the users can likely use dev->fwnode directly instead of indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not guaranteed to be set for all, so this has to be investigated on case to case basis (by people who can actually test with the HW). [ tglx: Fix up subject prefix ] Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> # For 8xx Link: https://lore.kernel.org/all/20250319092951.37667-33-jirislaby@kernel.org
2025-04-04irqdomain: Rename irq_set_default_host() to irq_set_default_domain()Jiri Slaby (SUSE)
Naming interrupt domains host is confusing at best and the irqdomain code uses both domain and host inconsistently. Therefore rename irq_set_default_host() to irq_set_default_domain(). Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250319092951.37667-3-jirislaby@kernel.org
2024-10-29powerpc/machdep: Drop include of seq_file.hMichael Ellerman
Drop the include of seq_file.h in machdep.h, replace it with a forward declaration of struct seq_file, which is all that's required. Add direct includes of seq_file.h to some files that were getting seq_file.h via machdep.h. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://patch.msgid.link/20241009051826.132805-1-mpe@ellerman.id.au
2024-03-07powerpc/embedded6xx: Fix no previous prototype for avr_uart_send() etc.Michael Ellerman
Move the prototypes into mpc10x.h which is included by all the relevant C files, fixes: arch/powerpc/platforms/embedded6xx/ls_uart.c:59:6: error: no previous prototype for 'avr_uart_configure' arch/powerpc/platforms/embedded6xx/ls_uart.c:82:6: error: no previous prototype for 'avr_uart_send' Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240305123410.3306253-1-mpe@ellerman.id.au
2023-08-02powerpc: Explicitly include correct DT includesRob Herring
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> [mpe: Fixup maple/setup.c which needs platform_device] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230724210247.778034-1-robh@kernel.org
2023-06-09powerpc/embedded6xx: select MPC10X_BRIDGE only if PCI is setRandy Dunlap
When CONFIG_SMP is not set, CONFIG_BROKEN_ON_SMP is set, and CONFIG_PCI is not set, there can be a kconfig warning: WARNING: unmet direct dependencies detected for PPC_INDIRECT_PCI Depends on [n]: PCI [=n] Selected by [y]: - MPC10X_BRIDGE [=y] To fix that, make the selects of MPC10X_BRIDGE be conditional on PCI and use "imply" instead of "select". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Suggested-by: Michael Ellerman <mpe@ellerman.id.au> # use "imply" Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230521225103.19197-1-rdunlap@infradead.org
2023-04-20powerpc: drop HPC II (MPC7448) evaluation platform support.Paul Gortmaker
This was an interesting platform - it was the 1st instance of a respin of earlier 130nm 74xx CPUs on 90nm and systems using MPC7448 were positioned as a rack server platform solution. Given that, the evaluation platform (at least the one I had) was shipped in a horizontal 1/2 height Antec desktop case with retro styling and colours, despite the fact the docs explicitly stated that the HPC II is not a desktop machine (noting it had no gfx or legacy PC I/O support). Historic trivia aside, this was the 1st introduction of the e600 procfam as an evolution from the earlier G4. However even with the claim to being "1st e600" it seems the 2005+ era was turning its attention to multicore support and from my memory this poor guy was quickly overshadowed by the dual core MPC8641D. All that aside, we are once again looking at 15+ year old evaluation platforms that were not widely distributed, so 2023 removal makes sense. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230225201318.3682-2-paul.gortmaker@windriver.com
2023-04-04powerpc: Use of_address_to_resource()Rob Herring
Replace open coded reading of "reg" or of_get_address()/ of_translate_address() calls with a single call to of_address_to_resource(). Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230329220337.141295-1-robh@kernel.org
2023-04-04powerpc/usbgecko: Use of_iomap()Rob Herring
Replace of_get_property()+of_translate_address()+ioremap() with a call to of_iomap() which does all those steps. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230327223109.820381-1-robh@kernel.org
2023-03-30powerpc/wii: fix resource printk format warningsRandy Dunlap
Use "%pa" format specifier for resource_size_t to avoid compiler printk format warnings. ../arch/powerpc/platforms/embedded6xx/flipper-pic.c: In function 'flipper_pic_init': ../include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=] ../arch/powerpc/platforms/embedded6xx/flipper-pic.c:148:9: note: in expansion of macro 'pr_info' 148 | pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base); | ^~~~~~~ ../arch/powerpc/platforms/embedded6xx/hlwd-pic.c: In function 'hlwd_pic_init': ../include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=] ../arch/powerpc/platforms/embedded6xx/hlwd-pic.c:174:9: note: in expansion of macro 'pr_info' 174 | pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base); | ^~~~~~~ ../arch/powerpc/platforms/embedded6xx/wii.c: In function 'wii_ioremap_hw_regs': ../include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=] ../arch/powerpc/platforms/embedded6xx/wii.c:77:17: note: in expansion of macro 'pr_info' 77 | pr_info("%s at 0x%08x mapped to 0x%p\n", name, | ^~~~~~~ Fixes: 028ee972f032 ("powerpc: gamecube/wii: flipper interrupt controller support") Fixes: 9c21025c7845 ("powerpc: wii: hollywood interrupt controller support") Fixes: 5a7ee3198dfa ("powerpc: wii: platform support") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230223070116.660-3-rdunlap@infradead.org
2023-03-16powerpc: Make generic_calibrate_decr() the defaultChristophe Leroy
ppc_md.calibrate_decr() is a mandatory item. Its nullity is never checked so it must be non null on all platforms. Most platforms define generic_calibrate_decr() as their ppc_md.calibrate_decr(). Have time_init() call generic_calibrate_decr() when ppc_md.calibrate_decr() is NULL, and remove default assignment from all machines. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/6cb9865d916231c38401ba34ad1a98c249fae135.1676711562.git.christophe.leroy@csgroup.eu
2023-03-16powerpc/gamecube|wii : Use machine_device_initcall()Christophe Leroy
Instead of checking machine type in the function, use machine_device_initcall(). Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/6cb9865d916231c38401ba34ad1a98c249fae135.1676711562.git.christophe.leroy@csgroup.eu
2023-03-15powerpc/platforms: Use 'compatible' property for simple casesChristophe Leroy
Use the new 'compatible' property for simple cases. checkpatch complains about the new compatible being undocumented but in reality nothing is new so just ignore it for the time being. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/6cb9865d916231c38401ba34ad1a98c249fae135.1676711562.git.christophe.leroy@csgroup.eu
2022-09-05powerpc/embedded6xx/ls_uart: Add missing of_node_put()Liang He
In ls_uarts_init(), add an of_node_put() to keep refcount balance. Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220620065904.4071787-1-windhl@126.com
2022-09-05powerpc/embedded6xx: Add missing of_node_put()sLiang He
Add missing of_node_put()s in various paths. Signed-off-by: Liang He <windhl@126.com> [mpe: Rewrite change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220618041042.4058066-1-windhl@126.com
2022-09-01powerpc/32: Remove wii_memory_fixups()Christophe Leroy
wii_memory_fixups() is not called anymore, remove it. Also remove left-overs in mmu_decl.h which were forgotten by commit 160985f3025b ("powerpc/wii: remove wii_mmu_mapin_mem2()") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/5f2091f86528b59ef92ef1daed5d3dd8c0d7bebd.1661938317.git.christophe.leroy@csgroup.eu
2022-05-08powerpc: Add missing headersChristophe Leroy
Don't inherit headers "by chances" from asm/prom.h, asm/mpc52xx.h, asm/pci.h etc... Include the needed headers, and remove asm/prom.h when it was needed exclusively for pulling necessary headers. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/be8bdc934d152a7d8ee8d1a840d5596e2f7d85e0.1646767214.git.christophe.leroy@csgroup.eu
2022-05-08powerpc: Remove asm/prom.h from all files that don't need itChristophe Leroy
Several files include asm/prom.h for no reason. Clean it up. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Drop change to prom_parse.c as reported by lkp@intel.com] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/7c9b8fda63dcf63e1b28f43e7ebdb95182cbc286.1646767214.git.christophe.leroy@csgroup.eu
2021-12-23powerpc/embedded6xx: Add __init attribute to eligible functionsNick Child
Some functions defined in 'arch/powerpc/platforms/embedded6xx' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by: Nick Child <nick.child@ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211216220035.605465-17-nick.child@ibm.com
2021-12-02powerpc: Rename PPC_NATIVE to PPC_HASH_MMU_NATIVENicholas Piggin
PPC_NATIVE now only controls the native HPT code, so rename it to be more descriptive. Restrict it to Book3S only. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211201144153.2456614-3-npiggin@gmail.com
2021-11-25powerpc/6xx: add missing of_node_putJulia Lawall
for_each_compatible_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression e; local idexpression n; @@ @@ local idexpression n; expression e; @@ for_each_compatible_node(n,...) { ... ( of_node_put(n); | e = n | + of_node_put(n); ? break; ) ... } ... when != n // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1448051604-25256-2-git-send-email-Julia.Lawall@lip6.fr
2021-08-26powerpc: Refactor verification of MSR_RIChristophe Leroy
40x and BOOKE don't have MSR_RI therefore all tests involving MSR_RI may be problematic on those plateforms. Create helpers to check or set MSR_RI in regs, and use them in common code. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/c2fb93708196734f4176dda334aaa3055f213b89.1629707037.git.christophe.leroy@csgroup.eu
2021-08-10powerpc: Bulk conversion to generic_handle_domain_irq()Marc Zyngier
Wherever possible, replace constructs that match either generic_handle_irq(irq_find_mapping()) or generic_handle_irq(irq_linear_revmap()) to a single call to generic_handle_domain_irq(). Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210802162630.2219813-13-maz@kernel.org
2021-07-02Merge tag 'powerpc-5.14-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - A big series refactoring parts of our KVM code, and converting some to C. - Support for ARCH_HAS_SET_MEMORY, and ARCH_HAS_STRICT_MODULE_RWX on some CPUs. - Support for the Microwatt soft-core. - Optimisations to our interrupt return path on 64-bit. - Support for userspace access to the NX GZIP accelerator on PowerVM on Power10. - Enable KUAP and KUEP by default on 32-bit Book3S CPUs. - Other smaller features, fixes & cleanups. Thanks to: Andy Shevchenko, Aneesh Kumar K.V, Arnd Bergmann, Athira Rajeev, Baokun Li, Benjamin Herrenschmidt, Bharata B Rao, Christophe Leroy, Daniel Axtens, Daniel Henrique Barboza, Finn Thain, Geoff Levand, Haren Myneni, Jason Wang, Jiapeng Chong, Joel Stanley, Jordan Niethe, Kajol Jain, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Paul Mackerras, Russell Currey, Sathvika Vasireddy, Shaokun Zhang, Stephen Rothwell, Sudeep Holla, Suraj Jitindar Singh, Tom Rix, Vaibhav Jain, YueHaibing, Zhang Jianhua, and Zhen Lei. * tag 'powerpc-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (218 commits) powerpc: Only build restart_table.c for 64s powerpc/64s: move ret_from_fork etc above __end_soft_masked powerpc/64s/interrupt: clean up interrupt return labels powerpc/64/interrupt: add missing kprobe annotations on interrupt exit symbols powerpc/64: enable MSR[EE] in irq replay pt_regs powerpc/64s/interrupt: preserve regs->softe for NMI interrupts powerpc/64s: add a table of implicit soft-masked addresses powerpc/64e: remove implicit soft-masking and interrupt exit restart logic powerpc/64e: fix CONFIG_RELOCATABLE build warnings powerpc/64s: fix hash page fault interrupt handler powerpc/4xx: Fix setup_kuep() on SMP powerpc/32s: Fix setup_{kuap/kuep}() on SMP powerpc/interrupt: Use names in check_return_regs_valid() powerpc/interrupt: Also use exit_must_hard_disable() on PPC32 powerpc/sysfs: Replace sizeof(arr)/sizeof(arr[0]) with ARRAY_SIZE powerpc/ptrace: Refactor regs_set_return_{msr/ip} powerpc/ptrace: Move set_return_regs_changed() before regs_set_return_{msr/ip} powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi() powerpc/pseries/vas: Include irqdomain.h powerpc: mark local variables around longjmp as volatile ...
2021-06-25powerpc/64s: avoid reloading (H)SRR registers if they are still validNicholas Piggin
When an interrupt is taken, the SRR registers are set to return to where it left off. Unless they are modified in the meantime, or the return address or MSR are modified, there is no need to reload these registers when returning from interrupt. Introduce per-CPU flags that track the validity of SRR and HSRR registers. These are cleared when returning from interrupt, when using the registers for something else (e.g., OPAL calls), when adjusting the return address or MSR of a context, and when context switching (which changes the return address and MSR). This improves the performance of interrupt returns. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Fold in fixup patch from Nick] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210617155116.2167984-5-npiggin@gmail.com
2021-06-10powerpc: Add missing linux/{of.h,irqdomain.h} include directivesMarc Zyngier
A bunch of PPC files are missing the inclusion of linux/of.h and linux/irqdomain.h, relying on transitive inclusion from another file. As we are about to break this dependency, make sure these dependencies are explicit. Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-03-29powerpc/embedded6xx: Remove CONFIG_MV64X60Christophe Leroy
Commit 92c8c16f3457 ("powerpc/embedded6xx: Remove C2K board support") moved the last selector of CONFIG_MV64X60. As it is not a user selectable config, it can be removed. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/19e57d16692dcd1ca67ba880d7273a57fab416aa.1616085654.git.christophe.leroy@csgroup.eu
2021-02-09powerpc/embedded6xx/mve5100: Move PHB discoveryOliver O'Halloran
Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201103043523.916109-16-oohall@gmail.com
2021-02-09powerpc/embedded6xx/mpc7448: Move PHB discoveryOliver O'Halloran
Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201103043523.916109-15-oohall@gmail.com
2021-02-09powerpc/embedded6xx/linkstation: Move PHB discoveryOliver O'Halloran
Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201103043523.916109-14-oohall@gmail.com
2021-02-09powerpc/embedded6xx/holly: Move PHB discoveryOliver O'Halloran
Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201103043523.916109-13-oohall@gmail.com
2020-09-02powerpc: Drop _nmask_and_or_msr()Christophe Leroy
_nmask_and_or_msr() is only used at two places to set MSR_IP. The SYNC is unnecessary as the users are not PowerPC 601. Can be easily writen in C. Do it, and drop _nmask_and_or_msr() Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/c2d2b8dfb8dd677026b26dffc8d31070c38a6b89.1597388079.git.christophe.leroy@csgroup.eu
2020-05-20powerpc/wii: Fix declaration made after definitionNathan Chancellor
A 0day randconfig uncovered an error with clang, trimmed for brevity: arch/powerpc/platforms/embedded6xx/wii.c:195:7: error: attribute declaration must precede definition [-Werror,-Wignored-attributes] if (!machine_is(wii)) ^ The macro machine_is declares mach_##name but define_machine actually defines mach_##name, hence the warning. To fix this, move define_machine after the is_machine usage. Fixes: 5a7ee3198dfa ("powerpc: wii: platform support") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://github.com/ClangBuiltLinux/linux/issues/989 Link: https://lore.kernel.org/r/20200413190644.16757-1-natechancellor@gmail.com
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-20powerpc/embedded6xx: Remove unused functions holly_power_off and holly_haltMathieu Malaterre
Silence the following warnings triggered using W=1: arch/powerpc/platforms/embedded6xx/holly.c:236:6: error: no previous prototype for 'holly_power_off' arch/powerpc/platforms/embedded6xx/holly.c:243:6: error: no previous prototype for 'holly_halt' Signed-off-by: Mathieu Malaterre <malat@debian.org> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-04-20powerpc/embedded6xx: Make some functions staticMathieu Malaterre
In commit cb9e4d10c448 ("[POWERPC] Add support for 750CL Holly board") new functions were added. Since most of these functions can be made static, make it so. Both holly_power_off and holly_halt functions were not changed since they are unused, making them static would have triggered the following warning (treated as error): arch/powerpc/platforms/embedded6xx/holly.c:244:13: error: 'holly_halt' defined but not used Silence the following warnings triggered using W=1: arch/powerpc/platforms/embedded6xx/holly.c:47:5: error: no previous prototype for 'holly_exclude_device' arch/powerpc/platforms/embedded6xx/holly.c:190:6: error: no previous prototype for 'holly_show_cpuinfo' arch/powerpc/platforms/embedded6xx/holly.c:196:17: error: no previous prototype for 'holly_restart' Signed-off-by: Mathieu Malaterre <malat@debian.org> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-23powerpc/wii: remove wii_mmu_mapin_mem2()Christophe Leroy
wii_mmu_mapin_mem2() is not used anymore, remove it. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-23powerpc/wii: properly disable use of BATs when requested.Christophe Leroy
'nobats' kernel parameter or some options like CONFIG_DEBUG_PAGEALLOC deny the use of BATS for mapping memory. This patch makes sure that the specific wii RAM mapping function takes it into account as well. Fixes: de32400dd26e ("wii: use both mem1 and mem2 as ram") Cc: stable@vger.kernel.org Reviewed-by: Jonathan Neuschafer <j.neuschaefer@gmx.net> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-29Merge tag 'kconfig-v4.21-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig file consolidation from Masahiro Yamada: "Consolidation of bus (PCI, PCMCIA, EISA, RapidIO) config entries by Christoph Hellwig. Currently, every architecture that wants to provide common peripheral busses needs to add some boilerplate code and include the right Kconfig files. This series instead just selects the presence (when needed) and then handles everything in the bus-specific Kconfig file under drivers/" * tag 'kconfig-v4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: pcmcia: remove per-arch PCMCIA config entry eisa: consolidate EISA Kconfig entry in drivers/eisa rapidio: consolidate RAPIDIO config entry in drivers/rapidio pcmcia: allow PCMCIA support independent of the architecture PCI: consolidate the PCI_SYSCALL symbol PCI: consolidate the PCI_DOMAINS and PCI_DOMAINS_GENERIC config options PCI: consolidate PCI config entry in drivers/pci MIPS: remove the HT_PCI config option
2018-11-26powerpc/kconfig: remove CONFIG_6xxChristophe Leroy
CONFIG_6xx is not used anymore. Remove it. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-23PCI: consolidate PCI config entry in drivers/pciChristoph Hellwig
There is no good reason to duplicate the PCI menu in every architecture. Instead provide a selectable HAVE_PCI symbol that indicates availability of PCI support, and a FORCE_PCI symbol to for PCI on and the handle the rest in drivers/pci. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Paul Burton <paul.burton@mips.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-10-03powerpc: Convert to using %pOFn instead of device_node.nameRob Herring
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-02powerpc: wii: Remove outdated comment about memory fixupsJonathan Neuschäfer
The workaround has been removed. What stays is just code to find the memory hole so the BATs can be configured properly in the function below. Fixes: 57deb8fea01f ("powerpc/wii: Don't rely on the reserved memory hack") Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-04powerpc/embedded6xx: Remove C2K board supportMark Greer
The C2K platform appears to be orphaned so remove code supporting it. CC: Remi Machet <rmachet@nvidia.com> Signed-off-by: Mark Greer <mgreer@animalcreek.com> Acked-by: Remi Machet <remi@machet.us> Signed-off-by: Mark Greer <mgreer@animalcreek.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-25powerpc/wii: Make hlwd_pic_init function staticMathieu Malaterre
The function hlwd_pic_init can be made static, so do it. Fix the following warning treated as error (W=1): ../arch/powerpc/platforms/embedded6xx/hlwd-pic.c:158:20: error: no previous prototype for ‘hlwd_pic_init’ [-Werror=missing-prototypes] Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-15powerpc/embedded6xx/hlwd-pic: Prevent interrupts from being handled by StarletJonathan Neuschäfer
The interrupt controller inside the Wii's Hollywood chip is connected to two masters, the "Broadway" PowerPC and the "Starlet" ARM926, each with their own interrupt status and mask registers. When booting the Wii with mini[1], interrupts from the SD card controller (IRQ 7) are handled by the ARM, because mini provides SD access over IPC. Linux however can't currently use or disable this IPC service, so both sides try to handle IRQ 7 without coordination. Let's instead make sure that all interrupts that are unmasked on the PPC side are masked on the ARM side; this will also make sure that Linux can properly talk to the SD card controller (and potentially other devices). If access to a device through IPC is desired in the future, interrupts from that device should not be handled by Linux directly. [1]: https://github.com/lewurm/mini Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-15powerpc/embedded6xx/flipper-pic: Don't match all IRQ domainsJonathan Neuschäfer
On the Wii, there is a secondary IRQ controller (hlwd-pic), so flipper-pic's match operation should not be hardcoded to return 1. In fact, the default matching logic is sufficient, and we can completely omit flipper_pic_match. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-01powerpc/wii: Don't rely on the reserved memory hackJonathan Neuschäfer
Because the two memory blocks (usually called MEM1 and MEM2) are not merged anymore, __request_region in kernel/resource.c will correctly allow reserving regions in the physical address space between MEM1 and MEM2, where many important peripherals are (GPIO, MMC, USB, ...). A previous change to __ioremap_caller in arch/powerpc/mm/pgtable_32.c ensures that multiple memblocks are properly considered in ioremap; this makes it unnecessary to set __allow_ioremap_reserved. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 07:18:00 +0000