| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"As usual, many cleanups. The below blurbiage describes 42 patchsets.
21 of those are partially or fully cleanup work. "cleans up",
"cleanup", "maintainability", "rationalizes", etc.
I never knew the MM code was so dirty.
"mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes)
addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly
mapped VMAs were not eligible for merging with existing adjacent
VMAs.
"mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park)
adds a new kernel module which simplifies the setup and usage of
DAMON in production environments.
"stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig)
is a cleanup to the writeback code which removes a couple of
pointers from struct writeback_control.
"drivers/base/node.c: optimization and cleanups" (Donet Tom)
contains largely uncorrelated cleanups to the NUMA node setup and
management code.
"mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman)
does some maintenance work on the userfaultfd code.
"Readahead tweaks for larger folios" (Ryan Roberts)
implements some tuneups for pagecache readahead when it is reading
into order>0 folios.
"selftests/mm: Tweaks to the cow test" (Mark Brown)
provides some cleanups and consistency improvements to the
selftests code.
"Optimize mremap() for large folios" (Dev Jain)
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
"Remove zero_user()" (Matthew Wilcox)
expunges zero_user() in favor of the more modern memzero_page().
"mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand)
addresses some warts which David noticed in the huge page code.
These were not known to be causing any issues at this time.
"mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park)
provides some cleanup and consolidation work in DAMON.
"use vm_flags_t consistently" (Lorenzo Stoakes)
uses vm_flags_t in places where we were inappropriately using other
types.
"mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy)
increases the reliability of large page allocation in the memfd
code.
"mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple)
removes several now-unneeded PFN_* flags.
"mm/damon: decouple sysfs from core" (SeongJae Park)
implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
"madvise cleanup" (Lorenzo Stoakes)
does quite a lot of cleanup/maintenance work in the madvise() code.
"madvise anon_name cleanups" (Vlastimil Babka)
provides additional cleanups on top or Lorenzo's effort.
"Implement numa node notifier" (Oscar Salvador)
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory
on/offline notifier.
"Make MIGRATE_ISOLATE a standalone bit" (Zi Yan)
cleans up the pageblock isolation code and fixes a potential issue
which doesn't seem to cause any problems in practice.
"selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park)
adds additional drgn- and python-based DAMON selftests which are
more comprehensive than the existing selftest suite.
"Misc rework on hugetlb faulting path" (Oscar Salvador)
fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
"cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport)
rationalizes and cleans up the highmem-specific code in the CMA
allocator.
"mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand)
provides cleanups and future-preparedness to the migration code.
"mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park)
adds some tracepoints to some DAMON auto-tuning code.
"mm/damon: fix misc bugs in DAMON modules" (SeongJae Park)
does that.
"mm/damon: misc cleanups" (SeongJae Park)
also does what it claims.
"mm: folio_pte_batch() improvements" (David Hildenbrand)
cleans up the large folio PTE batching code.
"mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park)
facilitates dynamic alteration of DAMON's inter-node allocation
policy.
"Remove unmap_and_put_page()" (Vishal Moola)
provides a couple of page->folio conversions.
"mm: per-node proactive reclaim" (Davidlohr Bueso)
implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
"mm/damon: remove damon_callback" (SeongJae Park)
replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
"mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes)
implements a number of mremap cleanups (of course) in preparation
for adding new mremap() functionality: newly permit the remapping
of multiple VMAs when the user is specifying MREMAP_FIXED. It still
excludes some specialized situations where this cannot be performed
reliably.
"drop hugetlb_free_pgd_range()" (Anthony Yznaga)
switches some sparc hugetlb code over to the generic version and
removes the thus-unneeded hugetlb_free_pgd_range().
"mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park)
augments the present userspace-requested update of DAMON sysfs
monitoring files. Automatic update is now provided, along with a
tunable to control the update interval.
"Some randome fixes and cleanups to swapfile" (Kemeng Shi)
does what is claims.
"mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand)
provides (and uses) a means by which debug-style functions can grab
a copy of a pageframe and inspect it locklessly without tripping
over the races inherent in operating on the live pageframe
directly.
"use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan)
addresses the large contention issues which can be triggered by
reads from that procfs file. Latencies are reduced by more than
half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
"__folio_split() clean up" (Zi Yan)
cleans up __folio_split()!
"Optimize mprotect() for large folios" (Dev Jain)
provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
"selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian)
does some cleanup work in the selftests code.
"tools/testing: expand mremap testing" (Lorenzo Stoakes)
extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
"selftests/damon/sysfs.py: test all parameters" (SeongJae Park)
extends the DAMON sysfs interface selftest so that it tests all
possible user-requested parameters. Rather than the present minimal
subset"
* tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits)
MAINTAINERS: add missing headers to mempory policy & migration section
MAINTAINERS: add missing file to cgroup section
MAINTAINERS: add MM MISC section, add missing files to MISC and CORE
MAINTAINERS: add missing zsmalloc file
MAINTAINERS: add missing files to page alloc section
MAINTAINERS: add missing shrinker files
MAINTAINERS: move memremap.[ch] to hotplug section
MAINTAINERS: add missing mm_slot.h file THP section
MAINTAINERS: add missing interval_tree.c to memory mapping section
MAINTAINERS: add missing percpu-internal.h file to per-cpu section
mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info()
selftests/damon: introduce _common.sh to host shared function
selftests/damon/sysfs.py: test runtime reduction of DAMON parameters
selftests/damon/sysfs.py: test non-default parameters runtime commit
selftests/damon/sysfs.py: generalize DAMON context commit assertion
selftests/damon/sysfs.py: generalize monitoring attributes commit assertion
selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion
selftests/damon/sysfs.py: test DAMOS filters commitment
selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion
selftests/damon/sysfs.py: test DAMOS destinations commitment
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- CONFIG_HZ changes to move the base_slice from 10ms to 1ms
- Patchset to move some of the mutex handling to lock guard
- Expose secvars relevant to the key management mode
- Misc cleanups and fixes
Thanks to Ankit Chauhan, Christophe Leroy, Donet Tom, Gautam Menghani,
Haren Myneni, Johan Korsnes, Madadi Vineeth Reddy, Paul Mackerras,
Shrikanth Hegde, Srish Srinivasan, Thomas Fourier, Thomas Huth, Thomas
Weißschuh, Souradeep, Amit Machhiwal, R Nageswara Sastry, Venkat Rao
Bagalkote, Andrew Donnellan, Greg Kroah-Hartman, Mimi Zohar, Mukesh
Kumar Chaurasiya, Nayna Jain, Ritesh Harjani (IBM), Sourabh Jain, Srikar
Dronamraju, Stefan Berger, Tyrel Datwyler, and Kowshik Jois.
* tag 'powerpc-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (23 commits)
arch/powerpc: Remove .interp section in vmlinux
powerpc: Drop GPL boilerplate text with obsolete FSF address
powerpc: Don't use %pK through printk
arch: powerpc: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX
misc: ocxl: Replace scnprintf() with sysfs_emit() in sysfs show functions
integrity/platform_certs: Allow loading of keys in the static key management mode
powerpc/secvar: Expose secvars relevant to the key management mode
powerpc/pseries: Correct secvar format representation for static key management
(powerpc/512) Fix possible `dma_unmap_single()` on uninitialized pointer
powerpc: floppy: Add missing checks after DMA map
book3s64/radix : Optimize vmemmap start alignment
book3s64/radix : Handle error conditions properly in radix_vmemmap_populate
powerpc/pseries/dlpar: Search DRC index from ibm,drc-indexes for IO add
KVM: PPC: Book3S HV: Add H_VIRT mapping for tracing exits
powerpc: sysdev: use lock guard for mutex
powerpc: powernv: ocxl: use lock guard for mutex
powerpc: book3s: vas: use lock guard for mutex
powerpc: fadump: use lock guard for mutex
powerpc: rtas: use lock guard for mutex
powerpc: eeh: use lock guard for mutex
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
sysfs:
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
Support cache-ids for device-tree systems:
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
Rust:
- Device:
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres:
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID:
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA:
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O:
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc:
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
Misc:
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()"
* tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits)
rust: io: fix broken intra-doc links to `platform::Device`
rust: io: fix broken intra-doc link to missing `flags` module
rust: io: mem: enable IoRequest doc-tests
rust: platform: add resource accessors
rust: io: mem: add a generic iomem abstraction
rust: io: add resource abstraction
rust: samples: dma: set DMA mask
rust: platform: implement the `dma::Device` trait
rust: pci: implement the `dma::Device` trait
rust: dma: add DMA addressing capabilities
rust: dma: implement `dma::Device` trait
rust: net::phy Change module_phy_driver macro to use module_device_table macro
rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id
rust: device_id: split out index support into a separate trait
device: rust: rename Device::as_ref() to Device::from_raw()
arm64: cacheinfo: Provide helper to compress MPIDR value into u32
cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id
cacheinfo: Set cache 'id' based on DT data
container_of: Document container_of() is not to be used in new code
driver core: auxiliary bus: fix OF node leak
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of TTY and Serial driver updates for 6.17-rc1.
Included in here is the following types of changes:
- another cleanup round from Jiri for the 8250 serial driver and some
other tty drivers, things are slowly getting better with our apis
thanks to this work. This touched many tty drivers all over the
tree.
- qcom_geni_serial driver update for new platforms and devices
- 8250 quirk handling fixups
- dt serial binding updates for different boards/platforms
- other minor cleanups and fixes
All of these have been in linux-next with no reported issues"
* tag 'tty-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
dt-bindings: serial: snps-dw-apb-uart: Allow use of a power-domain
serial: 8250: fix panic due to PSLVERR
dt-bindings: serial: samsung: add samsung,exynos2200-uart compatible
vt: defkeymap: Map keycodes above 127 to K_HOLE
vt: keyboard: Don't process Unicode characters in K_OFF mode
serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms
serial: qcom-geni: Enable PM runtime for serial driver
serial: qcom-geni: move clock-rate logic to separate function
serial: qcom-geni: move resource control logic to separate functions
serial: qcom-geni: move resource initialization to separate function
soc: qcom: geni-se: Enable QUPs on SA8255p Qualcomm platforms
dt-bindings: qcom: geni-se: describe SA8255p
dt-bindings: serial: describe SA8255p
serial: 8250_dw: Fix typo "notifer"
dt-bindings: serial: 8250: spacemit: set clocks property as required
dt-bindings: serial: renesas: Document RZ/V2N SCIF
serial: 8250_ce4100: Fix CONFIG_SERIAL_8250=n build
tty: omit need_resched() before cond_resched()
serial: 8250_ni: Reorder local variables
serial: 8250_ni: Fix build warning
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull simple_recursive_removal() update from Al Viro:
"Removing subtrees of kernel filesystems is done in quite a few places;
unfortunately, it's easy to get wrong. A number of open-coded attempts
are out there, with varying amount of bogosities.
simple_recursive_removal() had been introduced for doing that with all
precautions needed; it does an equivalent of rm -rf, with sufficient
locking, eviction of anything mounted on top of the subtree, etc.
This series converts a bunch of open-coded instances to using that"
* tag 'pull-simple_recursive_removal' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
functionfs, gadgetfs: use simple_recursive_removal()
kill binderfs_remove_file()
fuse_ctl: use simple_recursive_removal()
pstore: switch to locked_recursive_removal()
binfmt_misc: switch to locked_recursive_removal()
spufs: switch to locked_recursive_removal()
add locked_recursive_removal()
better lockdep annotations for simple_recursive_removal()
simple_recursive_removal(): saner interaction with fsnotify
|
|
Let's move the removal of the page from the balloon list into the single
caller, to remove the dependency on the PG_isolated flag and clarify
locking requirements.
Note that for now, balloon_page_delete() was used on two paths:
(1) Removing a page from the balloon for deflation through
balloon_page_list_dequeue()
(2) Removing an isolated page from the balloon for migration in the
per-driver migration handlers. Isolated pages were already removed from
the balloon list during isolation.
So instead of relying on the flag, we can just distinguish both cases
directly and handle it accordingly in the caller.
We'll shuffle the operations a bit such that they logically make more
sense (e.g., remove from the list before clearing flags).
In balloon migration functions we can now move the balloon_page_finalize()
out of the balloon lock and perform the finalization just before dropping
the balloon reference.
Document that the page lock is currently required when modifying the
movability aspects of a page; hopefully we can soon decouple this from the
page lock.
Link: https://lkml.kernel.org/r/20250704102524.326966-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pé rez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gregory Price <gourry@gourry.net>
Cc: Harry Yoo <harry.yoo@oracle.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The register_one_node() function was a simple wrapper around
__register_one_node(). To simplify the code, register_one_node() has been
removed, and __register_one_node() has been renamed to
register_one_node().
Link: https://lkml.kernel.org/r/8262cd0f44eeb048a1fcd3ac8382760d7f7dea60.1748452242.git.donettom@linux.ibm.com
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The PLPKS enabled PowerVM LPAR sysfs exposes all of the secure boot
secvars irrespective of the key management mode.
The PowerVM LPAR supports static and dynamic key management for secure
boot. The key management option can be updated in the management
console. The secvars PK, trustedcadb, and moduledb can be consumed both
in the static and dynamic key management modes for the loading of signed
third-party kernel modules. However, other secvars i.e. KEK, grubdb,
grubdbx, sbat, db and dbx, which are used to verify the grub and kernel
images, are consumed only in the dynamic key management mode.
Expose only PK, trustedcadb, and moduledb in the static key management
mode.
Co-developed-by: Souradeep <soura@imap.linux.ibm.com>
Signed-off-by: Souradeep <soura@imap.linux.ibm.com>
Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com>
Tested-by: R Nageswara Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250610211907.101384-3-ssrish@linux.ibm.com
|
|
On a PLPKS enabled PowerVM LPAR, the secvar format property for static
key management is misrepresented as "ibm,plpks-sb-unknown", creating
reason for confusion.
Static key management mode uses fixed, built-in keys. Dynamic key
management mode allows keys to be updated in production to handle
security updates without firmware rebuilds.
Define a function named plpks_get_sb_keymgmt_mode() to retrieve the
key management mode based on the existence of the SB_VERSION property
in the firmware.
Set the secvar format property to either "ibm,plpks-sb-v<version>" or
"ibm,plpks-sb-v0" based on the key management mode, and return the
length of the secvar format property.
Co-developed-by: Souradeep <soura@imap.linux.ibm.com>
Signed-off-by: Souradeep <soura@imap.linux.ibm.com>
Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com>
Tested-by: R Nageswara Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250610211907.101384-2-ssrish@linux.ibm.com
|
|
If the device configuration fails (if `dma_dev->device_config()`),
`sg_dma_address(&sg)` is not initialized and the jump to `err_dma_prep`
leads to calling `dma_unmap_single()` on `sg_dma_address(&sg)`.
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250610142918.169540-2-fourier.thomas@gmail.com
|
|
... and fix an old deadlock on spufs_mkdir() failures to populate
subdirectory - spufs_rmdir() had always been taking lock on the
victim, so doing it while the victim is locked is a bad idea.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
We need the driver-core fixes that are in 6.16-rc3 into here as well
to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
IO hotplug add event is handled in the user space with drmgr tool.
After the device is enabled, the user space uses /sys/kernel/dlpar
interface with “dt add index <drc_index>” to update the device tree.
The kernel interface (dlpar_hp_dt_add()) finds the parent node for
the specified ‘drc_index’ from ibm,drc-info property. The recent FW
provides this property from 2017 onwards. But KVM guest code in
some releases is still using the older SLOF firmware which has
ibm,drc-indexes property instead of ibm,drc-info.
If the ibm,drc-info is not available, this patch adds changes to
search ‘drc_index’ from the indexes array in ibm,drc-indexes
property to support old FW.
Fixes: 02b98ff44a57 ("powerpc/pseries/dlpar: Add device tree nodes for DLPAR IO add")
Reported-by: Kowshik Jois <kowsjois@linux.ibm.com>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250531235002.239213-1-haren@linux.ibm.com
|
|
use guard(mutex) for scope based resource management of mutex.
This would make the code simpler and easier to maintain.
More details on lock guards can be found at
https://lore.kernel.org/all/20230612093537.614161713@infradead.org/T/#u
Reviewed-by: Srikar Dronamraju <srikar@linux.ibm.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250505075333.184463-6-sshegde@linux.ibm.com
|
|
use lock guards for scope based resource management of mutex.
This would make the code simpler and easier to maintain.
More details on lock guards can be found at
https://lore.kernel.org/all/20230612093537.614161713@infradead.org/T/#u
This shows the use of both guard and scoped_guard
Reviewed-by: Srikar Dronamraju <srikar@linux.ibm.com>
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250505075333.184463-5-sshegde@linux.ibm.com
|
|
All these includes must have been cut & pasted. The code does not use
any tty or vt functionality at all.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: linuxppc-dev@lists.ozlabs.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250611100319.186924-6-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The normal bin_attrs field can now handle const pointers.
This makes the _new variant unnecessary.
Switch all users back.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20250530-sysfs-const-bin_attr-final-v3-4-724bfcf05b99@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The bin_attribute argument of bin_attribute::read() is now const.
This makes the _new() callbacks unnecessary. Switch all users back.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20250530-sysfs-const-bin_attr-final-v3-3-724bfcf05b99@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The user space calls mmap() to map VAS window paste address
and the kernel returns the complete mapped page for each
window. So return -EINVAL if non-zero is passed for offset
parameter to mmap().
See Documentation/arch/powerpc/vas-api.rst for mmap()
restrictions.
Co-developed-by: Jonathan Greental <yonatan02greental@gmail.com>
Signed-off-by: Jonathan Greental <yonatan02greental@gmail.com>
Reported-by: Jonathan Greental <yonatan02greental@gmail.com>
Fixes: dda44eb29c23 ("powerpc/vas: Add VAS user space API")
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250610021227.361980-2-maddy@linux.ibm.com
|
|
memtrace mmap issue has an out of bounds issue. This patch fixes the by
checking that the requested mapping region size should stay within the
allocated region size.
Reported-by: Jonathan Greental <yonatan02greental@gmail.com>
Fixes: 08a022ad3dfa ("powerpc/powernv/memtrace: Allow mmaping trace buffers")
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250610021227.361980-1-maddy@linux.ibm.com
|
|
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq cleanups from Thomas Gleixner:
"A set of cleanups for the generic interrupt subsystem:
- Consolidate on one set of functions for the interrupt domain code
to get rid of pointlessly duplicated code with only marginal
different semantics.
- Update the documentation accordingly and consolidate the coding
style of the irqdomain header"
* tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
irqdomain: Consolidate coding style
irqdomain: Fix kernel-doc and add it to Documentation
Documentation: irqdomain: Update it
Documentation: irq-domain.rst: Simple improvements
Documentation: irq/concepts: Minor improvements
Documentation: irq/concepts: Add commas and reflow
irqdomain: Improve kernel-docs of functions
irqdomain: Make struct irq_domain_info variables const
irqdomain: Use irq_domain_instantiate()'s return value as initializers
irqdomain: Drop irq_linear_revmap()
pinctrl: keembay: Switch to irq_find_mapping()
irqchip/armada-370-xp: Switch to irq_find_mapping()
gpu: ipu-v3: Switch to irq_find_mapping()
gpio: idt3243x: Switch to irq_find_mapping()
sh: Switch to irq_find_mapping()
powerpc: Switch to irq_find_mapping()
irqdomain: Drop irq_domain_add_*() functions
powerpc: Switch irq_domain_add_nomap() to use fwnode
thermal: Switch to irq_domain_create_linear()
soc: Switch to irq_domain_create_*()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- Support for dynamic preemption
- Migrate powerpc boards GPIO driver to new setter API
- Added new PMU for KVM host-wide measurement
- Enhancement to htmdump driver to support more functions
- Added character device for couple RTAS supported APIs
- Minor fixes and cleanup
Thanks to Amit Machhiwal, Athira Rajeev, Bagas Sanjaya, Bartosz
Golaszewski, Christophe Leroy, Eddie James, Gaurav Batra, Gautam
Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Jiri Slaby
(SUSE), Linus Walleij, Michal Suchanek, Naveen N Rao (AMD), Nilay
Shroff, Ricardo B. Marlière, Ritesh Harjani (IBM), Sathvika Vasireddy,
Shrikanth Hegde, Stephen Rothwell, Sourabh Jain, Thorsten Blum, Vaibhav
Jain, Venkat Rao Bagalkote, and Viktor Malik.
* tag 'powerpc-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (52 commits)
MAINTAINERS: powerpc: Remove myself as a reviewer
powerpc/iommu: Use str_disabled_enabled() helper
powerpc/powermac: Use str_enabled_disabled() and str_on_off() helpers
powerpc/mm/fault: Use str_write_read() helper function
powerpc: Replace strcpy() with strscpy() in proc_ppc64_init()
powerpc/pseries/iommu: Fix kmemleak in TCE table userspace view
powerpc/kernel: Fix ppc_save_regs inclusion in build
powerpc: Transliterate author name and remove FIXME
powerpc/pseries/htmdump: Include header file to get is_kvm_guest() definition
KVM: PPC: Book3S HV: Fix IRQ map warnings with XICS on pSeries KVM Guest
powerpc/8xx: Reduce alignment constraint for kernel memory
powerpc/boot: Fix build with gcc 15
powerpc/pseries/htmdump: Add documentation for H_HTM debugfs interface
powerpc/pseries/htmdump: Add htm capabilities support to htmdump module
powerpc/pseries/htmdump: Add htm flags support to htmdump module
powerpc/pseries/htmdump: Add htm setup support to htmdump module
powerpc/pseries/htmdump: Add htm info support to htmdump module
powerpc/pseries/htmdump: Add htm status support to htmdump module
powerpc/pseries/htmdump: Add htm start support to htmdump module
powerpc/pseries/htmdump: Add htm configure support to htmdump module
...
|
|
irq_linear_revmap() is deprecated, so remove all its uses and supersede
them by an identical call to irq_find_mapping().
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu> # for 8xx
Link: https://lore.kernel.org/all/20250319092951.37667-42-jirislaby@kernel.org
|
|
All irq_domain_add_*() functions are going away. PowerPC is the only
user of irq_domain_add_nomap() and there is no irq_domain_create_nomap()
complement.
Therefore, to align with the rest of the kernel, rename
irq_domain_add_nomap() to irq_domain_create_nomap() and accept a
fwnode_handle instead of a device_node.
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-40-jirislaby@kernel.org
|
|
irq_domain_add_*() interfaces are going away as being obsolete now.
Switch to the preferred irq_domain_create_*() ones. Those differ in the
node parameter: They take more generic struct fwnode_handle instead of
struct device_node. Therefore, of_fwnode_handle() is added around the
original parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> # For 8xx
Link: https://lore.kernel.org/all/20250319092951.37667-33-jirislaby@kernel.org
|
|
of_node_to_fwnode() is irqdomain's reimplementation of the "officially"
defined of_fwnode_handle(). The former is in the process of being
removed, so use the latter instead.
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-9-jirislaby@kernel.org
|
|
Remove hard-coded strings by using the str_enabled_disabled() and
str_on_off() helper functions.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250117114625.64903-2-thorsten.blum@linux.dev
|
|
When a device is opened by a userspace driver, via VFIO interface, DMA
window is created. This DMA window has TCE Table and a corresponding
data for userview of TCE table.
When the userspace driver closes the device, all the above infrastructure
is free'ed and the device control given back to kernel. Both DMA window
and TCE table is getting free'ed. But due to a code bug, userview of the
TCE table is not getting free'ed. This is resulting in a memory leak.
Befow is the information from KMEMLEAK
unreferenced object 0xc008000022af0000 (size 16777216):
comm "senlib_unit_tes", pid 9346, jiffies 4294983174
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 0):
kmemleak_vmalloc+0xc8/0x1a0
__vmalloc_node_range+0x284/0x340
vzalloc+0x58/0x70
spapr_tce_create_table+0x4b0/0x8d0
tce_iommu_create_table+0xcc/0x170 [vfio_iommu_spapr_tce]
tce_iommu_create_window+0x144/0x2f0 [vfio_iommu_spapr_tce]
tce_iommu_ioctl.part.0+0x59c/0xc90 [vfio_iommu_spapr_tce]
vfio_fops_unl_ioctl+0x88/0x280 [vfio]
sys_ioctl+0xf4/0x160
system_call_exception+0x164/0x310
system_call_vectored_common+0xe8/0x278
unreferenced object 0xc008000023b00000 (size 4194304):
comm "senlib_unit_tes", pid 9351, jiffies 4294984116
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 0):
kmemleak_vmalloc+0xc8/0x1a0
__vmalloc_node_range+0x284/0x340
vzalloc+0x58/0x70
spapr_tce_create_table+0x4b0/0x8d0
tce_iommu_create_table+0xcc/0x170 [vfio_iommu_spapr_tce]
tce_iommu_create_window+0x144/0x2f0 [vfio_iommu_spapr_tce]
tce_iommu_create_default_window+0x88/0x120 [vfio_iommu_spapr_tce]
tce_iommu_ioctl.part.0+0x57c/0xc90 [vfio_iommu_spapr_tce]
vfio_fops_unl_ioctl+0x88/0x280 [vfio]
sys_ioctl+0xf4/0x160
system_call_exception+0x164/0x310
system_call_vectored_common+0xe8/0x278
Fixes: f431a8cde7f1 ("powerpc/iommu: Reimplement the iommu_table_group_ops for pSeries")
Signed-off-by: Gaurav Batra <gbatra@linux.ibm.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250512224653.35697-1-gbatra@linux.ibm.com
|
|
htmdump_init calls is_kvm_guest() to check for guest environment.
is_kvm_guest() is defined in kvm_guest.h header file. Without including
the header file, build hits error failing to find the function.
arch/powerpc/platforms/pseries/htmdump.c: In function 'htmdump_init':
arch/powerpc/platforms/pseries/htmdump.c:469:6: error: implicit declaration of function 'is_kvm_guest';
did you mean '__key_get'? [-Werror=implicit-function-declaration]
if (is_kvm_guest()) {
^~~~~~~~~~~~
__key_get
This is observed in configs where CONFIG_KVM_GUEST is disabled.
Include header file explicitly to avoid the build error
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505061324.elUl4njU-lkp@intel.com/
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250506135232.69014-1-atrajeev@linux.ibm.com
|
|
Support dumping HTM capabilities information from Hardware
Trace Macro (HTM) function via debugfs interface. Under
debugfs folder "/sys/kernel/debug/powerpc/htmdump", add
file "htmcaps".
The interface allows only read of this file which will present the
content of HTM buffer from the hcall.
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250420180844.53128-9-atrajeev@linux.ibm.com
|
|
Under debugfs folder, "/sys/kernel/debug/powerpc/htmdump", add file
"htmflags". Currently supported flag value is to enable/disable
HTM buffer wrap. wrap is used along with "configure" to prevent
HTM buffer from wrapping. Writing 1 will set noWrap while
configuring HTM
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250420180844.53128-8-atrajeev@linux.ibm.com
|
|
Add htm setup support to htmdump module. To use the
HTM (Hardware Trace Macro), HTM buffer has to be allocated.
Support setup of HTM buffers via debugfs interface. Under
debugfs folder, "/sys/kernel/debug/powerpc/htmdump", add file
"htmsetup". The interface allows setup of HTM buffer by writing
size of HTM buffer in power of 2 to the "htmsetup" file
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250420180844.53128-7-atrajeev@linux.ibm.com
|
|
Support dumping system processor configuration from Hardware
Trace Macro (HTM) function via debugfs interface. Under
debugfs folder "/sys/kernel/debug/powerpc/htmdump", add
file "htminfo".
The interface allows only read of this file which will present the
content of HTM buffer from the hcall. The 16th offset of HTM
buffer has value for the number of entries for array of processors.
Use this information to copy data to the debugfs file
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250420180844.53128-6-atrajeev@linux.ibm.com
|
|
Support dumping status of Hardware Trace Macro (HTM) function
via debugfs interface. Under debugfs folder
"/sys/kernel/debug/powerpc/htmdump", add file "htmstatus".
The interface allows only read of this file which will present the
content of HTM status buffer from the hcall. The 16th offset of HTM
status buffer has value for the number of HTM entries in the status
buffer. Each nest htm status entry is 0x6 bytes, where as core HTM
status entry is 0x8 bytes. Calculate the number of bytes to read
based on this detail.
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250420180844.53128-5-atrajeev@linux.ibm.com
|
|
Support starting of Hardware Trace Macro (HTM) function
via debugfs interface. Under debugfs folder
"/sys/kernel/debug/powerpc/htmdump", add file "htmstart".
The interface allows starting of htm via this file by
writing value "1". Also allows stopping of htm tracing by
writing value "0" to this file. Any other value returns
-EINVAL.
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250420180844.53128-4-atrajeev@linux.ibm.com
|
|
Support configuring of Hardware Trace Macro (HTM) function
via debugfs interface. Under debugfs folder
"/sys/kernel/debug/powerpc/htmdump", add file "htmconfigure".
The interface allows configuring of htm via this file
by writing value "1". Allow deconfiguring of htm via this file
by writing value "0". Any other value returns -EINVAL.
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250420180844.53128-3-atrajeev@linux.ibm.com
|
|
H_HTM (Hardware Trace Macro) hypervisor call is an HCALL to export data
from Hardware Trace Macro (HTM) function. The debugfs interface to
export the HTM function data in an lpar currently supports only dumping
of HTM data in an lpar. To add support for setup, configuration and
control of HTM function via debugfs interface, update the hcall wrapper
function. Rename and update htm_get_dump_hardware to htm_hcall_wrapper()
so that it can be used for other HTM operations as well. Additionally
include parameter "htm_op". Update htmdump module to check the return
code of hcall in a separate function so that it can be reused for other
option too. Add check to disable the interface in guest environment.
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250420180844.53128-2-atrajeev@linux.ibm.com
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu> # powerpc 8xx
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250502-gpiochip-set-rv-powerpc-v2-5-488e43e325bf@linaro.org
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250502-gpiochip-set-rv-powerpc-v2-4-488e43e325bf@linaro.org
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250502-gpiochip-set-rv-powerpc-v2-3-488e43e325bf@linaro.org
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250502-gpiochip-set-rv-powerpc-v2-2-488e43e325bf@linaro.org
|
|
When a system is being suspended to RAM, the PCI devices are also
suspended and the PPC code ends up calling pseries_msi_compose_msg() and
this triggers the BUG_ON() in __pci_read_msi_msg() because the device at
this point is in reduced power state. In reduced power state, the memory
mapped registers of the PCI device are not accessible.
To replicate the bug:
1. Make sure deep sleep is selected
# cat /sys/power/mem_sleep
s2idle [deep]
2. Make sure console is not suspended (so that dmesg logs are visible)
echo N > /sys/module/printk/parameters/console_suspend
3. Suspend the system
echo mem > /sys/power/state
To fix this behaviour, read the cached msi message of the device when the
device is not in PCI_D0 power state instead of touching the hardware.
Fixes: a5f3d2c17b07 ("powerpc/pseries/pci: Add MSI domains")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Gautam Menghani <gautam@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250305090237.294633-1-gautam@linux.ibm.com
|
|
The RTAS call ibm,physical-attestation is used to retrieve
information about the trusted boot state of the firmware and
hypervisor on the system, and also Trusted Platform Modules (TPM)
data if the system is TCG 2.0 compliant.
This RTAS interface expects the caller to define different command
structs such as RetrieveTPMLog, RetrievePlatformCertificat and etc,
in a work area with a maximum size of 4K bytes and the response
buffer will be returned in the same work area.
The current implementation of this RTAS function is in the user
space but allocation of the work area is restricted with the system
lockdown. So this patch implements this RTAS function in the kernel
and expose to the user space with open/ioctl/read interfaces.
PAPR (2.13+ 21.3 ibm,physical-attestation) defines RTAS function:
- Pass the command struct to obtain the response buffer for the
specific command.
- This RTAS function is sequence RTAS call and has to issue RTAS
call multiple times to get the complete response buffer (max 64K).
The hypervisor expects the first RTAS call with the sequence 1 and
the subsequent calls with the sequence number returned from the
previous calls.
Expose these interfaces to user space with a
/dev/papr-physical-attestation character device using the following
programming model:
int devfd = open("/dev/papr-physical-attestation");
int fd = ioctl(devfd, PAPR_PHY_ATTEST_IOC_HANDLE,
struct papr_phy_attest_io_block);
- The user space defines the command struct and requests the
response for any command.
- Obtain the complete response buffer and returned the buffer as
blob to the command specific FD.
size = read(fd, buf, len);
- Can retrieve the response buffer once or multiple times until the
end of BLOB buffer.
Implemented this new kernel ABI support in librtas library for
system lockdown
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-8-haren@linux.ibm.com
|
|
ibm,platform-dump RTAS call in combination with writable mapping
/dev/mem is issued to collect platform dump from the hypervisor
and may need multiple calls to get the complete dump. The current
implementation uses rtas_platform_dump() API provided by librtas
library to issue these RTAS calls. But /dev/mem access by the
user space is prohibited under system lockdown.
The solution should be to restrict access to RTAS function in user
space and provide kernel interfaces to collect dump. This patch
adds papr-platform-dump character driver and expose standard
interfaces such as open / ioctl/ read to user space in ways that
are compatible with lockdown.
PAPR (7.3.3.4.1 ibm,platform-dump) provides a method to obtain
the complete dump:
- Each dump will be identified by ID called dump tag.
- A sequence of RTAS calls have to be issued until retrieve the
complete dump. The hypervisor expects the first RTAS call with
the sequence 0 and the subsequent calls with the sequence
number returned from the previous calls.
- The hypervisor returns "dump complete" status once the complete
dump is retrieved. But expects one more RTAS call from the
partition with the NULL buffer to invalidate dump which means
the dump will be removed in the hypervisor.
- Sequence of calls are allowed with different dump IDs at the
same time but not with the same dump ID.
Expose these interfaces to user space with a /dev/papr-platform-dump
character device using the following programming model:
int devfd = open("/dev/papr-platform-dump", O_RDONLY);
int fd = ioctl(devfd,PAPR_PLATFORM_DUMP_IOC_CREATE_HANDLE, &dump_id)
- Restrict user space to access with the same dump ID.
Typically we do not expect user space requests the dump
again for the same dump ID.
char *buf = malloc(size);
length = read(fd, buf, size);
- size should be minimum 1K based on PAPR and <= 4K based
on RTAS work area size. It will be restrict to RTAS work
area size. Using 4K work area based on the current
implementation in librtas library
- Each read call issue RTAS call to get the data based on
the size requirement and returns bytes returned from the
hypervisor
- If the previous call returns dump complete status, the
next read returns 0 like EOF.
ret = ioctl(PAPR_PLATFORM_DUMP_IOC_INVALIDATE, &dump_id)
- RTAS call with NULL buffer to invalidates the dump.
The read API should use the file descriptor obtained from ioctl
based on dump ID so that gets dump contents for the corresponding
dump ID. Implemented support in librtas (rtas_platform_dump()) for
this new ABI to support system lockdown.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-7-haren@linux.ibm.com
|
|
The RTAS call ibm,get-dynamic-sensor-state is used to get the
sensor state identified by the location code and the sensor
token. The librtas library provides an API
rtas_get_dynamic_sensor() which uses /dev/mem access for work
area allocation but is restricted under system lockdown.
This patch provides an interface with new ioctl
PAPR_DYNAMIC_SENSOR_IOC_GET to the papr-indices character
driver which executes this HCALL and copies the sensor state
in the user specified ioctl buffer.
Refer PAPR 7.3.19 ibm,get-dynamic-sensor-state for more
information on this RTAS call.
- User input parameters to the RTAS call: location code string
and the sensor token
Expose these interfaces to user space with a /dev/papr-indices
character device using the following programming model:
int fd = open("/dev/papr-indices", O_RDWR);
int ret = ioctl(fd, PAPR_DYNAMIC_SENSOR_IOC_GET,
struct papr_indices_io_block)
- The user space specifies input parameters in
papr_indices_io_block struct
- Returned state for the specified sensor is copied to
papr_indices_io_block.dynamic_param.state
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-6-haren@linux.ibm.com
|
|
The RTAS call ibm,set-dynamic-indicator is used to set the new
indicator state identified by a location code. The current
implementation uses rtas_set_dynamic_indicator() API provided by
librtas library which allocates RMO buffer and issue this RTAS
call in the user space. But /dev/mem access by the user space
is prohibited under system lockdown.
This patch provides an interface with new ioctl
PAPR_DYNAMIC_INDICATOR_IOC_SET to the papr-indices character
driver and expose this interface to the user space that is
compatible with lockdown.
Refer PAPR 7.3.18 ibm,set-dynamic-indicator for more
information on this RTAS call.
- User input parameters to the RTAS call: location code
string, indicator token and new state
Expose these interfaces to user space with a /dev/papr-indices
character device using the following programming model:
int fd = open("/dev/papr-indices", O_RDWR);
int ret = ioctl(fd, PAPR_DYNAMIC_INDICATOR_IOC_SET,
struct papr_indices_io_block)
- The user space passes input parameters in papr_indices_io_block
struct
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-5-haren@linux.ibm.com
|
|
The RTAS call ibm,get-indices is used to obtain indices and
location codes for a specified indicator or sensor token. The
current implementation uses rtas_get_indices() API provided by
librtas library which allocates RMO buffer and issue this RTAS
call in the user space. But writable mapping /dev/mem access by
the user space is prohibited under system lockdown.
To overcome the restricted access in the user space, the kernel
provide interfaces to collect indices data from the hypervisor.
This patch adds papr-indices character driver and expose standard
interfaces such as open / ioctl/ read to user space in ways that
are compatible with lockdown.
PAPR (2.13 7.3.17 ibm,get-indices RTAS Call) describes the
following steps to retrieve all indices data:
- User input parameters to the RTAS call: sensor or indicator,
and indice type
- ibm,get-indices is sequence RTAS call which means has to issue
multiple times to get the entire list of indicators or sensors
of a particular type. The hypervisor expects the first RTAS call
with the sequence 1 and the subsequent calls with the sequence
number returned from the previous calls.
- The OS may not interleave calls to ibm,get-indices for different
indicator or sensor types. Means other RTAS calls with different
type should not be issued while the previous type sequence is in
progress. So collect the entire list of indices and copied to
buffer BLOB during ioctl() and expose this buffer to the user
space with the file descriptor.
- The hypervisor fills the work area with a specific format but
does not return the number of bytes written to the buffer.
Instead of parsing the data for each call to determine the data
length, copy the work area size (RTAS_GET_INDICES_BUF_SIZE) to
the buffer. Return work-area size of data to the user space for
each read() call.
Expose these interfaces to user space with a /dev/papr-indices
character device using the following programming model:
int devfd = open("/dev/papr-indices", O_RDONLY);
int fd = ioctl(devfd, PAPR_INDICES_IOC_GET,
struct papr_indices_io_block)
- Collect all indices data for the specified token to the buffer
char *buf = malloc(RTAS_GET_INDICES_BUF_SIZE);
length = read(fd, buf, RTAS_GET_INDICES_BUF_SIZE)
- RTAS_GET_INDICES_BUF_SIZE of data is returned to the user
space.
- The user space retrieves the indices and their location codes
from the buffer
- Should issue multiple read() calls until reaches the end of
BLOB buffer.
The read() should use the file descriptor obtained from ioctl to
get the data that is exposed to file descriptor. Implemented
support in librtas (rtas_get_indices()) for this new ABI for
system lockdown.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-4-haren@linux.ibm.com
|
|
The RTAS call can be normal where retrieves the data form the
hypervisor once or sequence based RTAS call which has to
issue multiple times until the complete data is obtained. For
some of these sequence RTAS calls, the OS should not interleave
calls with different input until the sequence is completed.
The data is collected for each call and copy to the buffer
for the entire sequence during ioctl() handle and then expose
this buffer to the user space with read() handle.
One such sequence RTAS call is ibm,get-vpd and its support is
already included in the current code. To add the similar support
for other sequence based calls, move the common functions in to
separate file and update papr_rtas_sequence struct with the
following callbacks so that RTAS call specific code will be
defined and executed to complete the sequence.
struct papr_rtas_sequence {
int error;
void params;
void (*begin) (struct papr_rtas_sequence *);
void (*end) (struct papr_rtas_sequence *);
const char * (*work) (struct papr_rtas_sequence *, size_t *);
};
params: Input parameters used to pass for RTAS call.
Begin: RTAS call specific function to initialize data
including work area allocation.
End: RTAS call specific function to free up resources
(free work area) after the sequence is completed.
Work: The actual RTAS call specific function which collects
the data from the hypervisor.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-2-haren@linux.ibm.com
|
|
Remove hard-coded strings by using the str_write_read() helper function.
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250219111445.2875-2-thorsten.blum@linux.dev
|
