| Age | Commit message (Collapse) | Author |
|---|
|
When starting up, the GARDENA smart Gateway's power LED should be
flashing green. It is unclear why this has not been done earlier.
The LED frequency cannot be configured in the devicetree. Luckily, the
default is 1 Hz, which is what we want.
Signed-off-by: Ezra Buehler <ezra.buehler@husqvarnagroup.com>
Link: https://lore.kernel.org/r/20250612074737.311346-1-ezra@easyb.ch
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Bindings expect the LED node names to follow certain pattern, see
dtbs_check warnings:
at91sam9g15ek.dtb: leds: 'pb18', 'pd21' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alexander Dahl <ada@thorsis.com>
Link: https://lore.kernel.org/r/20240701164952.577277-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
The AT91SAM9G25-based GARDENA smart Gateway uses USART3 (ttyS1) to
communicate (over PPP, at 115200 baud) with the radio module.
We have been experiencing packet loss and seeing errors on the ppp0
interface. Enabling DMA for the serial interface resolves the issues.
Co-developed-by: Michael Zimmermann <michael.zimmermann@grandcentrix.net>
Signed-off-by: Michael Zimmermann <michael.zimmermann@grandcentrix.net>
Signed-off-by: Ezra Buehler <ezra.buehler@husqvarnagroup.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20240102161839.702625-3-ezra.buehler@husqvarna.com
[claudiu.beznea: s/Co-Developed-by/Co-developed-by to make checkpatch.pl
happy, s/at91/microchip in commit title]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.
There's no change to dtbs_install as the flat structure is maintained on
install.
The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
company (e.g. gemini, nspire)
The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
