i3c: mipi-i3c-hci: Use physical device pointer with DMA API

DMA transfer faults on Intel hardware when the IOMMU is enabled and
driver initialization will fail when attempting to do the first transfer:

	DMAR: DRHD: handling fault status reg 2
	DMAR: [DMA Read NO_PASID] Request device [00:11.0] fault addr 0x676e3000 [fault reason 0x71] SM: Present bit in first-level paging entry is clear
 	i3c mipi-i3c-hci.0: ring 0: Transfer Aborted
	mipi-i3c-hci mipi-i3c-hci.0: probe with driver mipi-i3c-hci failed with error -62

Reason for this is that the IOMMU setup is done for the physical devices
only and not for the virtual I3C Controller device object.

Therefore use the pointer to a physical device object with the DMA API.

Due to a data corruption observation when the device DMA is IOMMU
mapped, a properly sized receive bounce buffer is required if transfer
length is not a multiple of DWORDs.

Reported-by:
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250822105630.2820009-4-jarkko.nikula@linux.intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

0 files changed, 0 insertions, 0 deletions