summaryrefslogtreecommitdiff
path: root/drivers/platform/x86/intel_rar_register.c
blob: 73f8e6d726694ad918ba89fa6da7e5507885a2a7 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
/*
 *  rar_register.c - An Intel Restricted Access Region register driver
 *
 *  Copyright(c) 2009 Intel Corporation. All rights reserved.
 *
 *  This program is free software; you can redistribute it and/or
 *  modify it under the terms of the GNU General Public License as
 *  published by the Free Software Foundation; either version 2 of the
 *  License, or (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 *  General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; if not, write to the Free Software
 *  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
 *  02111-1307, USA.
 *
 * -------------------------------------------------------------------
 *  20091204 Mark Allyn <mark.a.allyn@intel.com>
 *	     Ossama Othman <ossama.othman@intel.com>
 *	Cleanup per feedback from Alan Cox and Arjan Van De Ven
 *
 *  20090806 Ossama Othman <ossama.othman@intel.com>
 *      Return zero high address if upper 22 bits is zero.
 *      Cleaned up checkpatch errors.
 *      Clarified that driver is dealing with bus addresses.
 *
 *  20090702 Ossama Othman <ossama.othman@intel.com>
 *      Removed unnecessary include directives
 *      Cleaned up spinlocks.
 *      Cleaned up logging.
 *      Improved invalid parameter checks.
 *      Fixed and simplified RAR address retrieval and RAR locking
 *      code.
 *
 *  20090626 Mark Allyn <mark.a.allyn@intel.com>
 *      Initial publish
 */

#include <linux/module.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/rar_register.h>

/* === Lincroft Message Bus Interface === */
#define LNC_MCR_OFFSET		0xD0	/* Message Control Register */
#define LNC_MDR_OFFSET		0xD4	/* Message Data Register */

/* Message Opcodes */
#define LNC_MESSAGE_READ_OPCODE	0xD0
#define LNC_MESSAGE_WRITE_OPCODE 0xE0

/* Message Write Byte Enables */
#define LNC_MESSAGE_BYTE_WRITE_ENABLES	0xF

/* B-unit Port */
#define LNC_BUNIT_PORT	0x3

/* === Lincroft B-Unit Registers - Programmed by IA32 firmware === */
#define LNC_BRAR0L	0x10
#define LNC_BRAR0H	0x11
#define LNC_BRAR1L	0x12
#define LNC_BRAR1H	0x13
/* Reserved for SeP */
#define LNC_BRAR2L	0x14
#define LNC_BRAR2H	0x15

/* Moorestown supports three restricted access regions. */
#define MRST_NUM_RAR 3

/* RAR Bus Address Range */
struct rar_addr {
	dma_addr_t low;
	dma_addr_t high;
};

/*
 *	We create one of these for each RAR
 */
struct client {
	int (*callback)(unsigned long data);
	unsigned long driver_priv;
	bool busy;
};

static DEFINE_MUTEX(rar_mutex);
static DEFINE_MUTEX(lnc_reg_mutex);

/*
 *	One per RAR device (currently only one device)
 */
struct rar_device {
	struct rar_addr rar_addr[MRST_NUM_RAR];
	struct pci_dev *rar_dev;
	bool registered;
	bool allocated;
	struct client client[MRST_NUM_RAR];
};

/* Current platforms have only one rar_device for 3 rar regions */
static struct rar_device my_rar_device;

/*
 *	Abstract out multiple device support. Current platforms only
 *	have a single RAR device.
 */

/**
 *	alloc_rar_device	-	return a new RAR structure
 *
 *	Return a new (but not yet ready) RAR device object
 */
static struct rar_device *alloc_rar_device(void)
{
	if (my_rar_device.allocated)
		return NULL;
	my_rar_device.allocated = 1;
	return &my_rar_device;
}

/**
 *	free_rar_device		-	free a RAR object
 *	@rar: the RAR device being freed
 *
 *	Release a RAR object and any attached resources
 */
static void free_rar_device(struct rar_device *rar)
{
	pci_dev_put(rar->rar_dev);
	rar->allocated = 0;
}

/**
 *	_rar_to_device		-	return the device handling this RAR
 *	@rar: RAR number
 *	@off: returned offset
 *
 *	Internal helper for looking up RAR devices. This and alloc are the
 *	two functions that need touching to go to multiple RAR devices.
 */
static struct rar_device *_rar_to_device(int rar, int *off)
{
	if (rar >= 0 && rar <= 3) {
		*off = rar;
		return &my_rar_device;
	}
	return NULL;
}

/**
 *	rar_to_device		-	return the device handling this RAR
 *	@rar: RAR number
 *	@off: returned offset
 *
 *	Return the device this RAR maps to if one is present, otherwise
 *	returns NULL. Reports the offset relative to the base of this
 *	RAR device in off.
 */
static struct rar_device *rar_to_device(int rar, int *off)
{
	struct rar_device *rar_dev = _rar_to_device(rar, off);
	if (rar_dev == NULL || !rar_dev->registered)
		return NULL;
	return rar_dev;
}

/**
 *	rar_to_client		-	return the client handling this RAR
 *	@rar: RAR number
 *
 *	Return the client this RAR maps to if a mapping is known, otherwise
 *	returns NULL.
 */
static struct client *rar_to_client(int rar)
{
	int idx;
	struct rar_device *r = _rar_to_device(rar, &idx);
	if (r != NULL)
		return &r->client[idx];
	return NULL;
}

/**
 *	rar_read_addr		-	retrieve a RAR mapping
 *	@pdev: PCI device for the RAR
 *	@offset: offset for message
 *	@addr: returned address
 *
 *	Reads the address of a given RAR register. Returns 0 on success
 *	or an error code on failure.
 */
static int rar_read_addr(struct pci_dev *pdev, int offset, dma_addr_t *addr)
{
	/*
	 * ======== The Lincroft Message Bus Interface ========
	 * Lincroft registers may be obtained via PCI from
	 * the host bridge using the Lincroft Message Bus
	 * Interface.  That message bus interface is generally
	 * comprised of two registers: a control register (MCR, 0xDO)
	 * and a data register (MDR, 0xD4).
	 *
	 * The MCR (message control register) format is the following:
	 *   1.  [31:24]: Opcode
	 *   2.  [23:16]: Port
	 *   3.  [15:8]: Register Offset
	 *   4.  [7:4]: Byte Enables (use 0xF to set all of these bits
	 *              to 1)
	 *   5.  [3:0]: reserved
	 *
	 *  Read (0xD0) and write (0xE0) opcodes are written to the
	 *  control register when reading and writing to Lincroft
	 *  registers, respectively.
	 *
	 *  We're interested in registers found in the Lincroft
	 *  B-unit.  The B-unit port is 0x3.
	 *
	 *  The six B-unit RAR register offsets we use are listed
	 *  earlier in this file.
	 *
	 *  Lastly writing to the MCR register requires the "Byte
	 *  enables" bits to be set to 1.  This may be achieved by
	 *  writing 0xF at bit 4.
	 *
	 * The MDR (message data register) format is the following:
	 *   1. [31:0]: Read/Write Data
	 *
	 *  Data being read from this register is only available after
	 *  writing the appropriate control message to the MCR
	 *  register.
	 *
	 *  Data being written to this register must be written before
	 *  writing the appropriate control message to the MCR
	 *  register.
	*/

	int result;
	u32 addr32;

	/* Construct control message */
	u32 const message =
		 (LNC_MESSAGE_READ_OPCODE << 24)
		 | (LNC_BUNIT_PORT << 16)
		 | (offset << 8)
		 | (LNC_MESSAGE_BYTE_WRITE_ENABLES << 4);

	dev_dbg(&pdev->dev, "Offset for 'get' LNC MSG is %x\n", offset);

	/*
	* We synchronize access to the Lincroft MCR and MDR registers
	* until BOTH the command is issued through the MCR register
	* and the corresponding data is read from the MDR register.
	* Otherwise a race condition would exist between accesses to
	* both registers.
	*/

	mutex_lock(&lnc_reg_mutex);

	/* Send the control message */
	result = pci_write_config_dword(pdev, LNC_MCR_OFFSET, message);
	if (!result) {
		/* Read back the address as a 32bit value */
		result = pci_read_config_dword(pdev, LNC_MDR_OFFSET, &addr32);
		*addr = (dma_addr_t)addr32;
	}
	mutex_unlock(&lnc_reg_mutex);
	return result;
}

/**
 *	rar_set_addr		-	Set a RAR mapping
 *	@pdev: PCI device for the RAR
 *	@offset: offset for message
 *	@addr: address to set
 *
 *	Sets the address of a given RAR register. Returns 0 on success
 *	or an error code on failure.
 */
static int rar_set_addr(struct pci_dev *pdev,
	int offset,
	dma_addr_t addr)
{
	/*
	* Data being written to this register must be written before
	* writing the appropriate control message to the MCR
	* register.
	* See rar_get_addrs() for a description of the
	* message bus interface being used here.
	*/

	int result;

	/* Construct control message */
	u32 const message = (LNC_MESSAGE_WRITE_OPCODE << 24)
		| (LNC_BUNIT_PORT << 16)
		| (offset << 8)
		| (LNC_MESSAGE_BYTE_WRITE_ENABLES << 4);

	/*
	* We synchronize access to the Lincroft MCR and MDR registers
	* until BOTH the command is issued through the MCR register
	* and the corresponding data is read from the MDR register.
	* Otherwise a race condition would exist between accesses to
	* both registers.
	*/

	mutex_lock(&lnc_reg_mutex);

	/* Send the control message */
	result = pci_write_config_dword(pdev, LNC_MDR_OFFSET, addr);
	if (!result)
		/* And address */
		result = pci_write_config_dword(pdev, LNC_MCR_OFFSET, message);

	mutex_unlock(&lnc_reg_mutex);
	return result;
}

/*
 *	rar_init_params		-	Initialize RAR parameters
 *	@rar: RAR device to initialise
 *
 *	Initialize RAR parameters, such as bus addresses, etc. Returns 0
 *	on success, or an error code on failure.
 */
static int init_rar_params(struct rar_device *rar)
{
	struct pci_dev *pdev = rar->rar_dev;
	unsigned int i;
	int result = 0;
	int offset = 0x10;	/* RAR 0 to 2 in order low/high/low/high/... */

	/* Retrieve RAR start and end bus addresses.
	* Access the RAR registers through the Lincroft Message Bus
	* Interface on PCI device: 00:00.0 Host bridge.
	*/

	for (i = 0; i < MRST_NUM_RAR; ++i) {
		struct rar_addr *addr = &rar->rar_addr[i];

		result = rar_read_addr(pdev, offset++, &addr->low);
		if (result != 0)
			return result;

		result = rar_read_addr(pdev, offset++, &addr->high);
		if (result != 0)
			return result;


		/*
		* Only the upper 22 bits of the RAR addresses are
		* stored in their corresponding RAR registers so we
		* must set the lower 10 bits accordingly.

		* The low address has its lower 10 bits cleared, and
		* the high address has all its lower 10 bits set,
		* e.g.:
		* low = 0x2ffffc00
		*/

		addr->low &= (dma_addr_t)0xfffffc00u;

		/*
		* Set bits 9:0 on uppser address if bits 31:10 are non
		* zero; otherwize clear all bits
		*/

		if ((addr->high & 0xfffffc00u) == 0)
			addr->high = 0;
		else
			addr->high |= 0x3ffu;
	}
	/* Done accessing the device. */

	if (result == 0) {
		for (i = 0; i != MRST_NUM_RAR; ++i) {
			/*
			* "BRAR" refers to the RAR registers in the
			* Lincroft B-unit.
			*/
			dev_info(&pdev->dev, "BRAR[%u] bus address range = "
			  "[%lx, %lx]\n", i,
			  (unsigned long)rar->rar_addr[i].low,
			  (unsigned long)rar->rar_addr[i].high);
		}
	}
	return result;
}

/**
 *	rar_get_address		-	get the bus address in a RAR
 *	@start: return value of start address of block
 *	@end: return value of end address of block
 *
 *	The rar_get_address function is used by other device drivers
 *	to obtain RAR address information on a RAR. It takes three
 *	parameters:
 *
 *	The function returns a 0 upon success or an error if there is no RAR
 *	facility on this system.
 */
int rar_get_address(int rar_index, dma_addr_t *start, dma_addr_t *end)
{
	int idx;
	struct rar_device *rar = rar_to_device(rar_index, &idx);

	if (rar == NULL) {
		WARN_ON(1);
		return -ENODEV;
	}

	*start = rar->rar_addr[idx].low;
	*end = rar->rar_addr[idx].high;
	return 0;
}
EXPORT_SYMBOL(rar_get_address);

/**
 *	rar_lock	-	lock a RAR register
 *	@rar_index: RAR to lock (0-2)
 *
 *	The rar_lock function is ued by other device drivers to lock an RAR.
 *	once a RAR is locked, it stays locked until the next system reboot.
 *
 *	The function returns a 0 upon success or an error if there is no RAR
 *	facility on this system, or the locking fails
 */
int rar_lock(int rar_index)
{
	struct rar_device *rar;
	int result;
	int idx;
	dma_addr_t low, high;

	rar = rar_to_device(rar_index, &idx);

	if (rar == NULL) {
		WARN_ON(1);
		return -EINVAL;
	}

	low = rar->rar_addr[idx].low & 0xfffffc00u;
	high = rar->rar_addr[idx].high & 0xfffffc00u;

	/*
	* Only allow I/O from the graphics and Langwell;
	* not from the x86 processor
	*/

	if (rar_index == RAR_TYPE_VIDEO) {
		low |= 0x00000009;
		high |= 0x00000015;
	} else if (rar_index == RAR_TYPE_AUDIO) {
		/* Only allow I/O from Langwell; nothing from x86 */
		low |= 0x00000008;
		high |= 0x00000018;
	} else
		/* Read-only from all agents */
		high |= 0x00000018;

	/*
	* Now program the register using the Lincroft message
	* bus interface.
	*/
	result = rar_set_addr(rar->rar_dev,
				2 * idx, low);

	if (result == 0)
		result = rar_set_addr(rar->rar_dev,
				2 * idx + 1, high);

	return result;
}
EXPORT_SYMBOL(rar_lock);

/**
 *	register_rar		-	register a RAR handler
 *	@num: RAR we wish to register for
 *	@callback: function to call when RAR support is available
 *	@data: data to pass to this function
 *
 *	The register_rar function is to used by other device drivers
 *	to ensure that this driver is ready. As we cannot be sure of
 *	the compile/execute order of drivers in ther kernel, it is
 *	best to give this driver a callback function to call when
 *	it is ready to give out addresses. The callback function
 *	would have those steps that continue the initialization of
 *	a driver that do require a valid RAR address. One of those
 *	steps would be to call rar_get_address()
 *
 *	This function return 0 on success or an error code on failure.
 */
int register_rar(int num, int (*callback)(unsigned long data),
							unsigned long data)
{
	/* For now we hardcode a single RAR device */
	struct rar_device *rar;
	struct client *c;
	int idx;
	int retval = 0;

	mutex_lock(&rar_mutex);

	/* Do we have a client mapping for this RAR number ? */
	c = rar_to_client(num);
	if (c == NULL) {
		retval = -ERANGE;
		goto done;
	}
	/* Is it claimed ? */
	if (c->busy) {
		retval = -EBUSY;
		goto done;
	}
	c->busy = 1;

	/* See if we have a handler for this RAR yet, if we do then fire it */
	rar = rar_to_device(num, &idx);

	if (rar) {
		/*
		* if the driver already registered, then we can simply
		* call the callback right now
		*/
		(*callback)(data);
		goto done;
	}

	/* Arrange to be called back when the hardware is found */
	c->callback = callback;
	c->driver_priv = data;
done:
	mutex_unlock(&rar_mutex);
	return retval;
}
EXPORT_SYMBOL(register_rar);

/**
 *	unregister_rar	-	release a RAR allocation
 *	@num: RAR number
 *
 *	Releases a RAR allocation, or pending allocation. If a callback is
 *	pending then this function will either complete before the unregister
 *	returns or not at all.
 */

void unregister_rar(int num)
{
	struct client *c;

	mutex_lock(&rar_mutex);
	c = rar_to_client(num);
	if (c == NULL || !c->busy)
		WARN_ON(1);
	else
		c->busy = 0;
	mutex_unlock(&rar_mutex);
}
EXPORT_SYMBOL(unregister_rar);

/**
 *	rar_callback		-	Process callbacks
 *	@rar: new RAR device
 *
 *	Process the callbacks for a newly found RAR device.
 */

static void rar_callback(struct rar_device *rar)
{
	struct client *c = &rar->client[0];
	int i;

	mutex_lock(&rar_mutex);

	rar->registered = 1;	/* Ensure no more callbacks queue */

	for (i = 0; i < MRST_NUM_RAR; i++) {
		if (c->callback && c->busy) {
			c->callback(c->driver_priv);
			c->callback = NULL;
		}
		c++;
	}
	mutex_unlock(&rar_mutex);
}

/**
 *	rar_probe		-	PCI probe callback
 *	@dev: PCI device
 *	@id: matching entry in the match table
 *
 *	A RAR device has been discovered. Initialise it and if successful
 *	process any pending callbacks that can now be completed.
 */
static int rar_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
	int error;
	struct rar_device *rar;

	dev_dbg(&dev->dev, "PCI probe starting\n");

	rar = alloc_rar_device();
	if (rar == NULL)
		return -EBUSY;

	/* Enable the device */
	error = pci_enable_device(dev);
	if (error) {
		dev_err(&dev->dev,
			"Error enabling RAR register PCI device\n");
		goto end_function;
	}

	/* Fill in the rar_device structure */
	rar->rar_dev = pci_dev_get(dev);
	pci_set_drvdata(dev, rar);

	/*
	 * Initialize the RAR parameters, which have to be retrieved
	 * via the message bus interface.
	 */
	error = init_rar_params(rar);
	if (error) {
		pci_disable_device(dev);
		dev_err(&dev->dev, "Error retrieving RAR addresses\n");
		goto end_function;
	}
	/* now call anyone who has registered (using callbacks) */
	rar_callback(rar);
	return 0;
end_function:
	free_rar_device(rar);
	return error;
}

const struct pci_device_id rar_pci_id_tbl[] = {
	{ PCI_VDEVICE(INTEL, 0x4110) },
	{ 0 }
};

MODULE_DEVICE_TABLE(pci, rar_pci_id_tbl);

const struct pci_device_id *my_id_table = rar_pci_id_tbl;

/* field for registering driver to PCI device */
static struct pci_driver rar_pci_driver = {
	.name = "rar_register_driver",
	.id_table = rar_pci_id_tbl,
	.probe = rar_probe,
	/* Cannot be unplugged - no remove */
};

static int __init rar_init_handler(void)
{
	return pci_register_driver(&rar_pci_driver);
}

static void __exit rar_exit_handler(void)
{
	pci_unregister_driver(&rar_pci_driver);
}

module_init(rar_init_handler);
module_exit(rar_exit_handler);

MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Intel Restricted Access Region Register Driver");