path: root/drivers/acpi/dispatcher/dsfield.c

/******************************************************************************
 *
 * Module Name: dsfield - Dispatcher field routines
 *
 *****************************************************************************/

/*
 * Copyright (C) 2000 - 2005, R. Byron Moore
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 *    substantially similar to the "NO WARRANTY" disclaimer below
 *    ("Disclaimer") and any redistribution must be conditioned upon
 *    including a substantially similar Disclaimer requirement for further
 *    binary redistribution.
 * 3. Neither the names of the above-listed copyright holders nor the names
 *    of any contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 *
 * NO WARRANTY
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGES.
 */


#include <acpi/acpi.h>
#include <acpi/amlcode.h>
#include <acpi/acdispat.h>
#include <acpi/acinterp.h>
#include <acpi/acnamesp.h>
#include <acpi/acparser.h>


#define _COMPONENT          ACPI_DISPATCHER
	 ACPI_MODULE_NAME    ("dsfield")

/* Local prototypes */

static acpi_status
acpi_ds_get_field_names (
	struct acpi_create_field_info   *info,
	struct acpi_walk_state          *walk_state,
	union acpi_parse_object         *arg);


/*******************************************************************************
 *
 * FUNCTION:    acpi_ds_create_buffer_field
 *
 * PARAMETERS:  Op                  - Current parse op (create_xXField)
 *              walk_state          - Current state
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Execute the create_field operators:
 *              create_bit_field_op,
 *              create_byte_field_op,
 *              create_word_field_op,
 *              create_dword_field_op,
 *              create_qword_field_op,
 *              create_field_op     (all of which define a field in a buffer)
 *
 ******************************************************************************/

acpi_status
acpi_ds_create_buffer_field (
	union acpi_parse_object         *op,
	struct acpi_walk_state          *walk_state)
{
	union acpi_parse_object         *arg;
	struct acpi_namespace_node      *node;
	acpi_status                     status;
	union acpi_operand_object       *obj_desc;
	union acpi_operand_object       *second_desc = NULL;
	u32                             flags;


	ACPI_FUNCTION_TRACE ("ds_create_buffer_field");


	/* Get the name_string argument */

	if (op->common.aml_opcode == AML_CREATE_FIELD_OP) {
		arg = acpi_ps_get_arg (op, 3);
	}
	else {
		/* Create Bit/Byte/Word/Dword field */

		arg = acpi_ps_get_arg (op, 2);
	}

	if (!arg) {
		return_ACPI_STATUS (AE_AML_NO_OPERAND);
	}

	if (walk_state->deferred_node) {
		node = walk_state->deferred_node;
		status = AE_OK;
	}
	else {
		/*
		 * During the load phase, we want to enter the name of the field into
		 * the namespace.  During the execute phase (when we evaluate the size
		 * operand), we want to lookup the name
		 */
		if (walk_state->parse_flags & ACPI_PARSE_EXECUTE) {
			flags = ACPI_NS_NO_UPSEARCH | ACPI_NS_DONT_OPEN_SCOPE;
		}
		else {
			flags = ACPI_NS_NO_UPSEARCH | ACPI_NS_DONT_OPEN_SCOPE |
					ACPI_NS_ERROR_IF_FOUND;
		}

		/*
		 * Enter the name_string into the namespace
		 */
		status = acpi_ns_lookup (walk_state->scope_info, arg->common.value.string,
				 ACPI_TYPE_ANY, ACPI_IMODE_LOAD_PASS1,
				 flags, walk_state, &(node));
		if (ACPI_FAILURE (status)) {
			ACPI_REPORT_NSERROR (arg->common.value.string, status);
			return_ACPI_STATUS (status);
		}
	}

	/* We could put the returned object (Node) on the object stack for later,
	 * but for now, we will put it in the "op" object that the parser uses,
	 * so we can get it again at the end of this scope
	 */
	op->common.node = node;

	/*
	 * If there is no object attached to the node, this node was just created
	 * and we need to create the field object.  Otherwise, this was a lookup
	 * of an existing node and we don't want to create the field object again.
	 */
	obj_desc = acpi_ns_get_attached_object (node);
	if (obj_desc) {
		return_ACPI_STATUS (AE_OK);
	}

	/*
	 * The Field definition is not fully parsed at this time.
	 * (We must save the address of the AML for the buffer and index operands)
	 */

	/* Create the buffer field object */

	obj_desc = acpi_ut_create_internal_object (ACPI_TYPE_BUFFER_FIELD);
	if (!obj_desc) {
		status = AE_NO_MEMORY;
		goto cleanup;
	}

	/*
	 * Remember location in AML stream of the field unit
	 * opcode and operands -- since the buffer and index
	 * operands must be evaluated.
	 */
	second_desc                 = obj_desc->common.next_object;
	second_desc->extra.aml_start = op->named.data;
	second_desc->extra.aml_length = op->named.length;
	obj_desc->buffer_field.node = node;

	/* Attach constructed field descriptors to parent node */

	status = acpi_ns_attach_object (node, obj_desc, ACPI_TYPE_BUFFER_FIELD);
	if (ACPI_FAILURE (status)) {
		goto cleanup;
	}


cleanup:

	/* Remove local reference to the object */

	acpi_ut_remove_reference (obj_desc);
	return_ACPI_STATUS (status);
}


/*******************************************************************************
 *
 * FUNCTION:    acpi_ds_get_field_names
 *
 * PARAMETERS:  Info            - create_field info structure
 *  `           walk_state      - Current method state
 *              Arg             - First parser arg for the field name list
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Process all named fields in a field declaration.  Names are
 *              entered into the namespace.
 *
 ******************************************************************************/

static acpi_status
acpi_ds_get_field_names (
	struct acpi_create_field_info   *info,
	struct acpi_walk_state          *walk_state,
	union acpi_parse_object         *arg)
{
	acpi_status                     status;
	acpi_integer                    position;


	ACPI_FUNCTION_TRACE_PTR ("ds_get_field_names", info);


	/* First field starts at bit zero */

	info->field_bit_position = 0;

	/* Process all elements in the field list (of parse nodes) */

	while (arg) {
		/*
		 * Three types of field elements are handled:
		 * 1) Offset - specifies a bit offset
		 * 2) access_as - changes the access mode
		 * 3) Name - Enters a new named field into the namespace
		 */
		switch (arg->common.aml_opcode) {
		case AML_INT_RESERVEDFIELD_OP:

			position = (acpi_integer) info->field_bit_position
					 + (acpi_integer) arg->common.value.size;

			if (position > ACPI_UINT32_MAX) {
				ACPI_REPORT_ERROR ((
					"Bit offset within field too large (> 0xFFFFFFFF)\n"));
				return_ACPI_STATUS (AE_SUPPORT);
			}

			info->field_bit_position = (u32) position;
			break;


		case AML_INT_ACCESSFIELD_OP:

			/*
			 * Get a new access_type and access_attribute -- to be used for all
			 * field units that follow, until field end or another access_as
			 * keyword.
			 *
			 * In field_flags, preserve the flag bits other than the
			 * ACCESS_TYPE bits
			 */
			info->field_flags = (u8)
				((info->field_flags & ~(AML_FIELD_ACCESS_TYPE_MASK)) |
				((u8) ((u32) arg->common.value.integer >> 8)));

			info->attribute = (u8) (arg->common.value.integer);
			break;


		case AML_INT_NAMEDFIELD_OP:

			/* Lookup the name */

			status = acpi_ns_lookup (walk_state->scope_info,
					  (char *) &arg->named.name,
					  info->field_type, ACPI_IMODE_EXECUTE,
					  ACPI_NS_DONT_OPEN_SCOPE,
					  walk_state, &info->field_node);
			if (ACPI_FAILURE (status)) {
				ACPI_REPORT_NSERROR ((char *) &arg->named.name, status);
				if (status != AE_ALREADY_EXISTS) {
					return_ACPI_STATUS (status);
				}

				/* Already exists, ignore error */
			}
			else {
				arg->common.node = info->field_node;
				info->field_bit_length = arg->common.value.size;

				/* Create and initialize an object for the new Field Node */

				status = acpi_ex_prep_field_value (info);
				if (ACPI_FAILURE (status)) {
					return_ACPI_STATUS (status);
				}
			}

			/* Keep track of bit position for the next field */

			position = (acpi_integer) info->field_bit_position
					 + (acpi_integer) arg->common.value.size;

			if (position > ACPI_UINT32_MAX) {
				ACPI_REPORT_ERROR ((
					"Field [%4.4s] bit offset too large (> 0xFFFFFFFF)\n",
					(char *) &info->field_node->name));
				return_ACPI_STATUS (AE_SUPPORT);
			}

			info->field_bit_position += info->field_bit_length;
			break;


		default:

			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
				"Invalid opcode in field list: %X\n",
				arg->common.aml_opcode));
			return_ACPI_STATUS (AE_AML_BAD_OPCODE);
		}

		arg = arg->common.next;
	}

	return_ACPI_STATUS (AE_OK);
}


/*******************************************************************************
 *
 * FUNCTION:    acpi_ds_create_field
 *
 * PARAMETERS:  Op              - Op containing the Field definition and args
 *              region_node     - Object for the containing Operation Region
 *  `           walk_state      - Current method state
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Create a new field in the specified operation region
 *
 ******************************************************************************/

acpi_status
acpi_ds_create_field (
	union acpi_parse_object         *op,
	struct acpi_namespace_node      *region_node,
	struct acpi_walk_state          *walk_state)
{
	acpi_status                     status;
	union acpi_parse_object         *arg;
	struct acpi_create_field_info   info;


	ACPI_FUNCTION_TRACE_PTR ("ds_create_field", op);


	/* First arg is the name of the parent op_region (must already exist) */

	arg = op->common.value.arg;
	if (!region_node) {
		status = acpi_ns_lookup (walk_state->scope_info, arg->common.value.name,
				  ACPI_TYPE_REGION, ACPI_IMODE_EXECUTE,
				  ACPI_NS_SEARCH_PARENT, walk_state, &region_node);
		if (ACPI_FAILURE (status)) {
			ACPI_REPORT_NSERROR (arg->common.value.name, status);
			return_ACPI_STATUS (status);
		}
	}

	/* Second arg is the field flags */

	arg = arg->common.next;
	info.field_flags = (u8) arg->common.value.integer;
	info.attribute = 0;

	/* Each remaining arg is a Named Field */

	info.field_type = ACPI_TYPE_LOCAL_REGION_FIELD;
	info.region_node = region_node;

	status = acpi_ds_get_field_names (&info, walk_state, arg->common.next);

	return_ACPI_STATUS (status);
}


/*******************************************************************************
 *
 * FUNCTION:    acpi_ds_init_field_objects
 *
 * PARAMETERS:  Op              - Op containing the Field definition and args
 *  `           walk_state      - Current method state
 *
 * RETURN:      Status
 *
 * DESCRIPTION: For each "Field Unit" name in the argument list that is
 *              part of the field declaration, enter the name into the
 *              namespace.
 *
 ******************************************************************************/

acpi_status
acpi_ds_init_field_objects (
	union acpi_parse_object         *op,
	struct acpi_walk_state          *walk_state)
{
	acpi_status                     status;
	union acpi_parse_object         *arg = NULL;
	struct acpi_namespace_node      *node;
	u8                              type = 0;


	ACPI_FUNCTION_TRACE_PTR ("ds_init_field_objects", op);


	switch (walk_state->opcode) {
	case AML_FIELD_OP:
		arg = acpi_ps_get_arg (op, 2);
		type = ACPI_TYPE_LOCAL_REGION_FIELD;
		break;

	case AML_BANK_FIELD_OP:
		arg = acpi_ps_get_arg (op, 4);
		type = ACPI_TYPE_LOCAL_BANK_FIELD;
		break;

	case AML_INDEX_FIELD_OP:
		arg = acpi_ps_get_arg (op, 3);
		type = ACPI_TYPE_LOCAL_INDEX_FIELD;
		break;

	default:
		return_ACPI_STATUS (AE_BAD_PARAMETER);
	}

	/*
	 * Walk the list of entries in the field_list
	 */
	while (arg) {
		/* Ignore OFFSET and ACCESSAS terms here */

		if (arg->common.aml_opcode == AML_INT_NAMEDFIELD_OP) {
			status = acpi_ns_lookup (walk_state->scope_info,
					  (char *) &arg->named.name,
					  type, ACPI_IMODE_LOAD_PASS1,
					  ACPI_NS_NO_UPSEARCH | ACPI_NS_DONT_OPEN_SCOPE |
					  ACPI_NS_ERROR_IF_FOUND,
					  walk_state, &node);
			if (ACPI_FAILURE (status)) {
				ACPI_REPORT_NSERROR ((char *) &arg->named.name, status);
				if (status != AE_ALREADY_EXISTS) {
					return_ACPI_STATUS (status);
				}

				/* Name already exists, just ignore this error */

				status = AE_OK;
			}

			arg->common.node = node;
		}

		/* Move to next field in the list */

		arg = arg->common.next;
	}

	return_ACPI_STATUS (AE_OK);
}


/*******************************************************************************
 *
 * FUNCTION:    acpi_ds_create_bank_field
 *
 * PARAMETERS:  Op              - Op containing the Field definition and args
 *              region_node     - Object for the containing Operation Region
 *  `           walk_state      - Current method state
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Create a new bank field in the specified operation region
 *
 ******************************************************************************/

acpi_status
acpi_ds_create_bank_field (
	union acpi_parse_object         *op,
	struct acpi_namespace_node      *region_node,
	struct acpi_walk_state          *walk_state)
{
	acpi_status                     status;
	union acpi_parse_object         *arg;
	struct acpi_create_field_info   info;


	ACPI_FUNCTION_TRACE_PTR ("ds_create_bank_field", op);


	/* First arg is the name of the parent op_region (must already exist) */

	arg = op->common.value.arg;
	if (!region_node) {
		status = acpi_ns_lookup (walk_state->scope_info, arg->common.value.name,
				  ACPI_TYPE_REGION, ACPI_IMODE_EXECUTE,
				  ACPI_NS_SEARCH_PARENT, walk_state, &region_node);
		if (ACPI_FAILURE (status)) {
			ACPI_REPORT_NSERROR (arg->common.value.name, status);
			return_ACPI_STATUS (status);
		}
	}

	/* Second arg is the Bank Register (Field) (must already exist) */

	arg = arg->common.next;
	status = acpi_ns_lookup (walk_state->scope_info, arg->common.value.string,
			  ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE,
			  ACPI_NS_SEARCH_PARENT, walk_state, &info.register_node);
	if (ACPI_FAILURE (status)) {
		ACPI_REPORT_NSERROR (arg->common.value.string, status);
		return_ACPI_STATUS (status);
	}

	/* Third arg is the bank_value */

	arg = arg->common.next;
	info.bank_value = (u32) arg->common.value.integer;

	/* Fourth arg is the field flags */

	arg = arg->common.next;
	info.field_flags = (u8) arg->common.value.integer;

	/* Each remaining arg is a Named Field */

	info.field_type = ACPI_TYPE_LOCAL_BANK_FIELD;
	info.region_node = region_node;

	status = acpi_ds_get_field_names (&info, walk_state, arg->common.next);

	return_ACPI_STATUS (status);
}


/*******************************************************************************
 *
 * FUNCTION:    acpi_ds_create_index_field
 *
 * PARAMETERS:  Op              - Op containing the Field definition and args
 *              region_node     - Object for the containing Operation Region
 *  `           walk_state      - Current method state
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Create a new index field in the specified operation region
 *
 ******************************************************************************/

acpi_status
acpi_ds_create_index_field (
	union acpi_parse_object         *op,
	struct acpi_namespace_node      *region_node,
	struct acpi_walk_state          *walk_state)
{
	acpi_status                     status;
	union acpi_parse_object         *arg;
	struct acpi_create_field_info   info;


	ACPI_FUNCTION_TRACE_PTR ("ds_create_index_field", op);


	/* First arg is the name of the Index register (must already exist) */

	arg = op->common.value.arg;
	status = acpi_ns_lookup (walk_state->scope_info, arg->common.value.string,
			  ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE,
			  ACPI_NS_SEARCH_PARENT, walk_state, &info.register_node);
	if (ACPI_FAILURE (status)) {
		ACPI_REPORT_NSERROR (arg->common.value.string, status);
		return_ACPI_STATUS (status);
	}

	/* Second arg is the data register (must already exist) */

	arg = arg->common.next;
	status = acpi_ns_lookup (walk_state->scope_info, arg->common.value.string,
			  ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE,
			  ACPI_NS_SEARCH_PARENT, walk_state, &info.data_register_node);
	if (ACPI_FAILURE (status)) {
		ACPI_REPORT_NSERROR (arg->common.value.string, status);
		return_ACPI_STATUS (status);
	}

	/* Next arg is the field flags */

	arg = arg->common.next;
	info.field_flags = (u8) arg->common.value.integer;

	/* Each remaining arg is a Named Field */

	info.field_type = ACPI_TYPE_LOCAL_INDEX_FIELD;
	info.region_node = region_node;

	status = acpi_ds_get_field_names (&info, walk_state, arg->common.next);

	return_ACPI_STATUS (status);
}