summaryrefslogtreecommitdiff
path: root/net/bluetooth/l2cap_sock.c
AgeCommit message (Collapse)Author
2012-01-03Bluetooth: Keep chan->state and sk->sk_state in syncGustavo F. Padovan
Those vars need to be in sync, otherwise l2cap_core.c can get the wrong state. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-19Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-next
2011-12-18Bluetooth: Add ProFUSION's copyrightGustavo F. Padovan
Add ProFUSION's copyright to some files I've been touching recently. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: invert locking order in connect pathGustavo F. Padovan
This move some checking code that was in l2cap_sock_connect() to l2cap_chan_connect(). Thus we can invert the lock calls, i.e., call lock_sock() before hci_dev_lock() to avoid a deadlock scenario. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-16Bluetooth: Use chan instead of l2cap_pi macroGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-06Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-next
2011-11-22Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux Conflicts: drivers/net/wireless/iwlegacy/iwl-debugfs.c drivers/net/wireless/iwlegacy/iwl-rx.c drivers/net/wireless/iwlegacy/iwl-scan.c drivers/net/wireless/iwlegacy/iwl-tx.c include/net/bluetooth/bluetooth.h
2011-11-10Bluetooth: Allow L2CAP to increase the security levelGustavo F. Padovan
Some incomming connections needs to increase the security level by requesting encryption for example (HID keyboard case). This change allows the userspace to change it through setsockopt with defer_setup enabled. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-09Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-next Conflicts: net/bluetooth/l2cap_sock.c net/bluetooth/mgmt.c
2011-11-07Bluetooth: Add channel policy to getsockopt/setsockoptMat Martineau
Each channel has a policy to require BR/EDR (the default), prefer BR/EDR, or prefer AMP. Check for valid policy value and L2CAP mode. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-07Bluetooth: Initialize tx_win_max for fixed channelAndrei Emeltchenko
tx_win_max is initialized during L2CAP configuration phase. For fixed channels (e.g. A2MP) we want to have it initialized when channel is created. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-07Bluetooth: set skbuffer priority based on L2CAP socket priorityLuiz Augusto von Dentz
This uses SO_PRIORITY to set the skbuffer priority field Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-31net: Add export.h for EXPORT_SYMBOL/THIS_MODULE to non-modulesPaul Gortmaker
These files are non modular, but need to export symbols using the macros now living in export.h -- call out the include so that things won't break when we remove the implicit presence of module.h from everywhere. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-18bluetooth: Properly clone LSM attributes to newly created child connectionsPaul Moore
The Bluetooth stack has internal connection handlers for all of the various Bluetooth protocols, and unfortunately, they are currently lacking the LSM hooks found in the core network stack's connection handlers. I say unfortunately, because this can cause problems for users who have have an LSM enabled and are using certain Bluetooth devices. See one problem report below: * http://bugzilla.redhat.com/show_bug.cgi?id=741703 In order to keep things simple at this point in time, this patch fixes the problem by cloning the parent socket's LSM attributes to the newly created child socket. If we decide we need a more elaborate LSM marking mechanism for Bluetooth (I somewhat doubt this) we can always revisit this decision in the future. Reported-by: James M. Cape <jcape@ignore-your.tv> Signed-off-by: Paul Moore <pmoore@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-13Bluetooth: EWS: extended window size option supportAndrei Emeltchenko
Adds support for extended window size (EWS) config option. We enable EWS feature in L2CAP Info RSP when hs enabled. EWS option is included in L2CAP Config Req if tx_win (which is set via socket) bigger then standard default value (63) && hs enabled && remote side supports EWS feature. Using EWS selects extended control field in L2CAP. Code partly based on Qualcomm and Atheros patches sent upstream a year ago. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-11Bluetooth: convert role_switch variable to flag in l2cap chanAndrei Emeltchenko
role_switch variable inside l2cap_chan is a logical one and can be easily converted to flag Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-11Bluetooth: convert force_active variable to flag in l2cap chanAndrei Emeltchenko
force_active variable inside l2cap_chan is a logical one and can be easily converted to flag Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-11Bluetooth: convert force_reliable variable to flag in l2cap chanAndrei Emeltchenko
force_reliable variable inside l2cap_chan is a logical one and can be easily converted to flag Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-11Bluetooth: convert flushable variable to flag in l2cap chanAndrei Emeltchenko
flushable variable inside l2cap_chan is a logical one and can be easily converted to flag. Added flags in l2cap_chan structure. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-08-11Bluetooth: Fixed wrong L2CAP Sock timer valueChen Ganir
L2CAP connection timeout needs to be assigned as miliseconds and not as jiffies. Signed-off-by: Chen Ganir <chen.ganir@ti.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-08-11Bluetooth: l2cap: Fix lost wakeups waiting to accept socketPeter Hurley
Fix race conditions which can cause lost wakeups (or misssed signals) while waiting to accept an l2cap socket connection. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-07-08Bluetooth: Add support for returning the encryption key sizeVinicius Costa Gomes
This will be useful when userspace wants to restrict some kinds of operations based on the length of the key size used to encrypt the link. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-07-07Bluetooth: Use event-driven approach for handling ERTM receive bufferMat Martineau
This change moves most L2CAP ERTM receive buffer handling out of the L2CAP core and in to the socket code. It's up to the higher layer (the socket code, in this case) to tell the core when its buffer is full or has space available. The recv op should always accept incoming ERTM data or else the connection will go down. Within the socket layer, an skb that does not fit in the socket receive buffer will be temporarily stored. When the socket is read from, that skb will be placed in the receive buffer if possible. Once adequate buffer space becomes available, the L2CAP core is informed and the ERTM local busy state is cleared. Receive buffer management for non-ERTM modes is unchanged. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-16Bluetooth: use bit operation on conf_stateGustavo F. Padovan
Instead of making the bit operations manually, we now use set_bit, test_bit, etc. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Add support for resuming socket when SMP is finishedVinicius Costa Gomes
This adds support for resuming the user space traffic when SMP negotiation is complete. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Add state tracking to struct l2cap_chanGustavo F. Padovan
Now socket state is tracked by struct sock and channel state is tracked by chan->state. At this point both says the same, but this is going to change when we add AMP Support for example. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: add close() callback to l2cap_chan_opsGustavo F. Padovan
close() calls l2cap_sock_kill() on l2cap_sock.c Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: add recv() callback to l2cap_chan_opsGustavo F. Padovan
This abstracts the call to sock_queue_recv_skb() into l2cap_chan_ops->recv(). Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Add l2cap_chan_ops abstractionGustavo F. Padovan
Add an abstraction layer between L2CAP core and its users (only l2cap_sock.c now). The first function implemented is new_connection() that replaces calls to l2cap_sock_alloc() in l2cap_core.c Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Merge l2cap_chan_create() in the l2cap_sock_alloc()Gustavo F. Padovan
As a first step to remove l2cap_sock_alloc() and l2cap_sock_init() from l2cap_core.c Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-09Merge master.kernel.org:/pub/scm/linux/kernel/git/padovan/bluetooth-2.6Gustavo F. Padovan
Conflicts: net/bluetooth/rfcomm/sock.c
2011-06-09Bluetooth: l2cap and rfcomm: fix 1 byte infoleak to userspace.Filip Palian
Structures "l2cap_conninfo" and "rfcomm_conninfo" have one padding byte each. This byte in "cinfo" is copied to userspace uninitialized. Signed-off-by: Filip Palian <filip.palian@pjwstk.edu.pl> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Add BT_POWER L2CAP socket option.Jaikumar Ganesh
Add BT_POWER socket option used to control the power characteristics of the underlying ACL link. When the remote end has put the link in sniff mode and the host stack wants to send data we need need to explicitly exit sniff mode to work well with certain devices (For example, A2DP on Plantronics Voyager 855). However, this causes problems with HID devices. Hence, moving into active mode when sending data, irrespective of who set the sniff mode has been made as a socket option. By default, we will move into active mode. HID devices can set the L2CAP socket option to prevent this from happening. Currently, this has been implemented for L2CAP sockets. This has been tested with incoming and outgoing L2CAP sockets for HID and A2DP. Based on discussions on linux-bluetooth and patches submitted by Andrei Emeltchenko. Signed-off-by: Jaikumar Ganesh <jaikumar@google.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Rename __l2cap_chan_close() to l2cap_chan_close()Gustavo F. Padovan
To make it consistent with the rest of the API. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Remove export of l2cap_chan_clear_timer()Gustavo F. Padovan
The call to l2cap_chan_clear_timer() is not really needed in l2cap_sock.c. This patch also adds a call to l2cap_chan_clear_timer() to the only place in __l2cap_sock_close() that wasn't calling it. It's safe call it there because l2cap_chan_clear_timer() check first for timer_peding(). Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: create channel timer to replace sk_timerGustavo F. Padovan
The new timer does not belong to struct sock, tought it still touch some sock things, but this will be sorted out soon. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Add chan->chan_type struct memberGustavo F. Padovan
chan_type says if our chan is raw(direclty access to HCI), connection less or connection oriented. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Create l2cap_chan_send()Gustavo F. Padovan
This move all the sending logic to l2cap_core.c, but we still have a socket dependence there, struct msghdr. It will be removed in some of the further commits. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Create __l2cap_chan_close()Gustavo F. Padovan
This is actually __l2cap_sock_close() renamed to __l2cap_chan_close(). At a first look it may not make sense, but with the further cleanups that will come it will. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-05-16Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-agn-tx.c net/mac80211/sta_info.h
2011-05-05Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/libertas/if_cs.c drivers/net/wireless/rtlwifi/pci.c net/bluetooth/l2cap_sock.c
2011-05-05Bluetooth: Remove l2cap_sk_listGustavo F. Padovan
A new list was added to replace the socket based one. This new list doesn't depent on sock and then fits better inside l2cap_core.c code. It also rename l2cap_chan_alloc() to l2cap_chan_create() and l2cap_chan_free() to l2cap_chan_destroy) Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-05-05Bluetooth: Handle psm == 0 case inside l2cap_add_psm()Gustavo F. Padovan
When the user doesn't specify a psm we have the choose one for the channel. Now we do this inside l2cap_add_psm(). Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-05-05Bluetooth: Add l2cap_add_psm() and l2cap_add_scid()Gustavo F. Padovan
The intention is to get rid of the l2cap_sk_list usage inside l2cap_core.c. l2cap_sk_list will soon be replaced by a list that does not depend on socket usage. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Don't export l2cap_sock_opsGustavo F. Padovan
l2cap_sk_ops can be static, it's not used outside l2cap_sock.c Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Fix memory leak with L2CAP channelsGustavo F. Padovan
A new l2cap_chan_free() is added to free the channels. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Move conn to struct l2cap_chanGustavo F. Padovan
There is no need to the socket deal directly with the channel, most of the time it cares about the channel only. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Move more vars to struct l2cap_chanGustavo F. Padovan
In this commit, psm, scid and dcid. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Move more channel info to struct l2cap_chanGustavo F. Padovan
In this commit, omtu, imtu, flush_to, mode and sport. It also remove the pi var from l2cap_sock_sendmsg(). Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-27Bluetooth: Move more vars to struct l2cap_chanGustavo F. Padovan
In this commit all ERTM and Streaming Mode specific vars. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-28 13:16:33 +0000