summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2011-03-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (26 commits) mmc: SDHI should depend on SUPERH || ARCH_SHMOBILE mmc: tmio_mmc: Move some defines into a shared header mmc: tmio: support aggressive clock gating mmc: tmio: fix power-mode interpretation mmc: tmio: remove work-around for unmasked SDIO interrupts sh: fix SDHI IO address-range ARM: mach-shmobile: fix SDHI IO address-range mmc: tmio: only access registers above 0xff, if available mfd: remove now redundant sh_mobile_sdhi.h header sh: convert boards to use linux/mmc/sh_mobile_sdhi.h ARM: mach-shmobile: convert boards to use linux/mmc/sh_mobile_sdhi.h mmc: tmio: convert the SDHI MMC driver from MFD to a platform driver sh: ecovec: use the CONFIG_MMC_TMIO symbols instead of MFD mmc: tmio: split core functionality, DMA and MFD glue mmc: tmio: use PIO for short transfers mmc: tmio-mmc: Improve DMA stability on sh-mobile mmc: fix mmc_app_send_scr() for dma transfer mmc: sdhci-esdhc: enable esdhc on imx53 mmc: sdhci-esdhc: use writel/readl as general APIs mmc: sdhci: add the abort CMDTYPE bits definition ...
2011-03-29Merge branch 'frv' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-frv * 'frv' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-frv: FRV: Use generic show_interrupts() FRV: Convert genirq namespace frv: Select GENERIC_HARDIRQS_NO_DEPRECATED frv: Convert cpu irq_chip to new functions frv: Convert mb93493 irq_chip to new functions frv: Convert mb93093 irq_chip to new function frv: Convert mb93091 irq_chip to new functions frv: Fix typo from __do_IRQ overhaul frv: Remove stale irq_chip.end FRV: Do some cleanups FRV: Missing node arg in alloc_thread_info_node() macro NOMMU: implement access_remote_vm NOMMU: support SMP dynamic percpu_alloc NOMMU: percpu should use is_vmalloc_addr().
2011-03-29Merge branch 'irq-final-for-linus-v2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-final-for-linus-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (111 commits) gpio: ab8500: Mark broken genirq: Remove move_*irq leftovers genirq: Remove compat code drivers: Final irq namespace conversion mn10300: Use generic show_interrupts() mn10300: Cleanup irq_desc access mn10300: Convert genirq namespace frv: Use generic show_interrupts() frv: Convert genirq namespace frv: Select GENERIC_HARDIRQS_NO_DEPRECATED frv: Convert cpu irq_chip to new functions frv: Convert mb93493 irq_chip to new functions frv: Convert mb93093 irq_chip to new function frv: Convert mb93091 irq_chip to new functions frv: Fix typo from __do_IRQ overhaul frv: Remove stale irq_chip.end m68k: Convert irq function namespace xen: Use new irq_move functions xen: Cleanup genirq namespace unicore32: Use generic show_interrupts() ...
2011-03-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (30 commits) xfrm: Restrict extended sequence numbers to esp xfrm: Check for esn buffer len in xfrm_new_ae xfrm: Assign esn pointers when cloning a state xfrm: Move the test on replay window size into the replay check functions netdev: bfin_mac: document TE setting in RMII modes drivers net: Fix declaration ordering in inline functions. cxgb3: Apply interrupt coalescing settings to all queues net: Always allocate at least 16 skb frags regardless of page size ipv4: Don't ip_rt_put() an error pointer in RAW sockets. net: fix ethtool->set_flags not intended -EINVAL return value mlx4_en: Fix loss of promiscuity tg3: Fix inline keyword usage tg3: use <linux/io.h> and <linux/uaccess.h> instead <asm/io.h> and <asm/uaccess.h> net: use CHECKSUM_NONE instead of magic number Net / jme: Do not use legacy PCI power management myri10ge: small rx_done refactoring bridge: notify applications if address of bridge device changes ipv4: Fix IP timestamp option (IPOPT_TS_PRESPEC) handling in ip_options_echo() can: c_can: Fix tx_bytes accounting can: c_can_platform: fix irq check in probe ...
2011-03-29genirq: Remove move_*irq leftoversThomas Gleixner
All users converted to new interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29genirq: Remove compat codeThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-28xfrm: Assign esn pointers when cloning a stateSteffen Klassert
When we clone a xfrm state we have to assign the replay_esn and the preplay_esn pointers to the state if we use the new replay detection method. To this end, we add a xfrm_replay_clone() function that allocates memory for the replay detection and takes over the necessary values from the original state. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-28net: Always allocate at least 16 skb frags regardless of page sizeAnton Blanchard
When analysing performance of the cxgb3 on a ppc64 box I noticed that we weren't doing much GRO merging. It turns out we are limited by the number of SKB frags: #define MAX_SKB_FRAGS (65536/PAGE_SIZE + 2) With a 4kB page size we have 18 frags, but with a 64kB page size we only have 3 frags. I ran a single stream TCP bandwidth test to compare the performance of Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-28Merge branches 'irq-cleanup-for-linus' and 'irq-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: vlynq: Convert irq functions * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq; Fix cleanup fallout genirq: Fix typo and remove unused variable genirq: Fix new kernel-doc warnings genirq: Add setter for AFFINITY_SET in irq_data state genirq: Provide setter inline for IRQD_IRQ_INPROGRESS genirq: Remove handle_IRQ_event arm: Ns9xxx: Remove private irq flow handler powerpc: cell: Use the core flow handler genirq: Provide edge_eoi flow handler genirq: Move INPROGRESS, MASKED and DISABLED state flags to irq_data genirq: Split irq_set_affinity() so it can be called with lock held. genirq: Add chip flag for restricting cpu_on/offline calls genirq: Add chip hooks for taking CPUs on/off line. genirq: Add irq disabled flag to irq_data state genirq: Reserve the irq when calling irq_set_chip()
2011-03-28Merge branch 'for-linus-unmerged' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable * 'for-linus-unmerged' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (45 commits) Btrfs: fix __btrfs_map_block on 32 bit machines btrfs: fix possible deadlock by clearing __GFP_FS flag btrfs: check link counter overflow in link(2) btrfs: don't mess with i_nlink of unlocked inode in rename() Btrfs: check return value of btrfs_alloc_path() Btrfs: fix OOPS of empty filesystem after balance Btrfs: fix memory leak of empty filesystem after balance Btrfs: fix return value of setflags ioctl Btrfs: fix uncheck memory allocations btrfs: make inode ref log recovery faster Btrfs: add btrfs_trim_fs() to handle FITRIM Btrfs: adjust btrfs_discard_extent() return errors and trimmed bytes Btrfs: make btrfs_map_block() return entire free extent for each device of RAID0/1/10/DUP Btrfs: make update_reserved_bytes() public btrfs: return EXDEV when linking from different subvolumes Btrfs: Per file/directory controls for COW and compression Btrfs: add datacow flag in inode flag btrfs: use GFP_NOFS instead of GFP_KERNEL Btrfs: check return value of read_tree_block() btrfs: properly access unaligned checksum buffer ... Fix up trivial conflicts in fs/btrfs/volumes.c due to plug removal in the block layer.
2011-03-28Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (81 commits) xo15-ebook: Remove device.wakeup_count ips: use interruptible waits in ips-monitor acer-wmi: does not poll device status when WMI event is available acer-wmi: does not set persistence state by rfkill_init_sw_state platform-drivers: x86: fix common misspellings acer-wmi: use pr_<level> for messages asus-wmi: potential NULL dereference in show_call() asus-wmi: signedness bug in read_brightness() platform-driver-x86: samsung-laptop: make dmi_check_cb to return 1 instead of 0 platform-driver-x86: fix wrong merge for compal-laptop.c msi-laptop: use pr_<level> for messages Platform: add Samsung Laptop platform driver acer-wmi: Fix WMI ID acer-wmi: deactive mail led when power off msi-laptop: send out touchpad on/off key acer-wmi: set the touchpad toggle key code to KEY_TOUCHPAD_TOGGLE platform-driver-x86: intel_mid_thermal: fix unterminated platform_device_id table sony-laptop: potential null dereference sony-laptop: handle allocation failures sony-laptop: return negative on failure in sony_nc_add() ...
2011-03-28Merge branch 'for-torvalds' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson * 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: mach-ux500: configure board for the TPS61052 regulator v2 mach-ux500: provide ab8500 init vector mach-ux500: board support for AB8500 GPIO driver gpio: driver for 42 AB8500 GPIO pins
2011-03-28genirq: Fix new kernel-doc warningsRandy Dunlap
Fix new irq-related kernel-doc warnings in 2.6.38: Warning(kernel/irq/manage.c:149): No description found for parameter 'mask' Warning(kernel/irq/manage.c:149): Excess function parameter 'cpumask' description in 'irq_set_affinity' Warning(include/linux/irq.h:161): No description found for parameter 'state_use_accessors' Warning(include/linux/irq.h:161): Excess struct/union/enum/typedef member 'state_use_accessor' description in 'irq_data' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> LKML-Reference: <20110318093356.b939558d.randy.dunlap@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-28genirq: Add setter for AFFINITY_SET in irq_data stateThomas Gleixner
Some archs want to prevent the default affinity being set on their chips in the reqeust_irq() path. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-28genirq: Provide setter inline for IRQD_IRQ_INPROGRESSThomas Gleixner
Special function for demultiplexing handlers which can be disabled via disable_irq(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-28genirq: Remove handle_IRQ_eventThomas Gleixner
Last user gone. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-28genirq: Provide edge_eoi flow handlerThomas Gleixner
This is a replacment for the cell flow handler which is in the way of cleanups. Must be selected to avoid general bloat. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-28genirq: Move INPROGRESS, MASKED and DISABLED state flags to irq_dataThomas Gleixner
We really need these flags for some of the interrupt chips. Move it from internal state to irq_data and provide proper accessors. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: David Daney <ddaney@caviumnetworks.com>
2011-03-28Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFS: Ensure that rpc_release_resources_task() can be called twice. NFS: Don't leak RPC clients in NFSv4 secinfo negotiation NFS: Fix a hang in the writeback path
2011-03-28NOMMU: support SMP dynamic percpu_allocGraf Yang
The percpu code requires more functions to be implemented in the mm core which nommu currently does not provide. So add inline implementations since these are largely meaningless on nommu systems. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Greg Ungerer <gerg@uclinux.org>
2011-03-28sony-laptop: ignore hard switch rfkill events (SPIC)Mattia Dongili
There is not much use for these events in userspace and handling the events themselves seems to get in the way of the actual activation of the rf devices. The SNC device doesn't expose them already. https://bugzilla.kernel.org/show_bug.cgi?id=15303 Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28eeepc-wmi: add camera keysCorentin Chary
These keys are supposed to be handled by any software using the camera (like webKam or cheese...). They can also be used to actually move the camera when possible. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28Btrfs: add datacow flag in inode flagliubo
For datacow control, the corresponding inode flags are needed. This is for btrfs use. v1->v2: Change FS_COW_FL to another bit due to conflict with the upstream e2fsprogs Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-03-28Btrfs: add initial tracepoint support for btrfsliubo
Tracepoints can provide insight into why btrfs hits bugs and be greatly helpful for debugging, e.g dd-7822 [000] 2121.641088: btrfs_inode_request: root = 5(FS_TREE), gen = 4, ino = 256, blocks = 8, disk_i_size = 0, last_trans = 8, logged_trans = 0 dd-7822 [000] 2121.641100: btrfs_inode_new: root = 5(FS_TREE), gen = 8, ino = 257, blocks = 0, disk_i_size = 0, last_trans = 0, logged_trans = 0 btrfs-transacti-7804 [001] 2146.935420: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29368320 (orig_level = 0), cow_buf = 29388800 (cow_level = 0) btrfs-transacti-7804 [001] 2146.935473: btrfs_cow_block: root = 1(ROOT_TREE), refs = 2, orig_buf = 29364224 (orig_level = 0), cow_buf = 29392896 (cow_level = 0) btrfs-transacti-7804 [001] 2146.972221: btrfs_transaction_commit: root = 1(ROOT_TREE), gen = 8 flush-btrfs-2-7821 [001] 2155.824210: btrfs_chunk_alloc: root = 3(CHUNK_TREE), offset = 1103101952, size = 1073741824, num_stripes = 1, sub_stripes = 0, type = DATA flush-btrfs-2-7821 [001] 2155.824241: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29388800 (orig_level = 0), cow_buf = 29396992 (cow_level = 0) flush-btrfs-2-7821 [001] 2155.824255: btrfs_cow_block: root = 4(DEV_TREE), refs = 2, orig_buf = 29372416 (orig_level = 0), cow_buf = 29401088 (cow_level = 0) flush-btrfs-2-7821 [000] 2155.824329: btrfs_cow_block: root = 3(CHUNK_TREE), refs = 2, orig_buf = 20971520 (orig_level = 0), cow_buf = 20975616 (cow_level = 0) btrfs-endio-wri-7800 [001] 2155.898019: btrfs_cow_block: root = 5(FS_TREE), refs = 2, orig_buf = 29384704 (orig_level = 0), cow_buf = 29405184 (cow_level = 0) btrfs-endio-wri-7800 [001] 2155.898043: btrfs_cow_block: root = 7(CSUM_TREE), refs = 2, orig_buf = 29376512 (orig_level = 0), cow_buf = 29409280 (cow_level = 0) Here is what I have added: 1) ordere_extent: btrfs_ordered_extent_add btrfs_ordered_extent_remove btrfs_ordered_extent_start btrfs_ordered_extent_put These provide critical information to understand how ordered_extents are updated. 2) extent_map: btrfs_get_extent extent_map is used in both read and write cases, and it is useful for tracking how btrfs specific IO is running. 3) writepage: __extent_writepage btrfs_writepage_end_io_hook Pages are cirtical resourses and produce a lot of corner cases during writeback, so it is valuable to know how page is written to disk. 4) inode: btrfs_inode_new btrfs_inode_request btrfs_inode_evict These can show where and when a inode is created, when a inode is evicted. 5) sync: btrfs_sync_file btrfs_sync_fs These show sync arguments. 6) transaction: btrfs_transaction_commit In transaction based filesystem, it will be useful to know the generation and who does commit. 7) back reference and cow: btrfs_delayed_tree_ref btrfs_delayed_data_ref btrfs_delayed_ref_head btrfs_cow_block Btrfs natively supports back references, these tracepoints are helpful on understanding btrfs's COW mechanism. 8) chunk: btrfs_chunk_alloc btrfs_chunk_free Chunk is a link between physical offset and logical offset, and stands for space infomation in btrfs, and these are helpful on tracing space things. 9) reserved_extent: btrfs_reserved_extent_alloc btrfs_reserved_extent_free These can show how btrfs uses its space. Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-03-28gpio: driver for 42 AB8500 GPIO pinsBibek Basu
To get rid of port expanders, the free GPIOs of ab8500 can be used. There are 42 GPIO pins. Out of which 16 are interrupt capable.This patch implements 16 virtual IRQ mapped to 16 interrupt capable AB8500 GPIOs. Signed-off-by: Bibek Basu <bibek.basu@stericsson.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> [Renamed header file as per MFD structure] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-27net: fix ethtool->set_flags not intended -EINVAL return valueStanislaw Gruszka
After commit d5dbda23804156ae6f35025ade5307a49d1db6d7 "ethtool: Add support for vlan accleration.", drivers that have NETIF_F_HW_VLAN_TX, and/or NETIF_F_HW_VLAN_RX feature, but do not allow enable/disable vlan acceleration via ethtool set_flags, always return -EINVAL from that function. Fix by returning -EINVAL only if requested features do not match current settings and can not be changed by driver. Change any driver that define ethtool->set_flags to use ethtool_invalid_flags() to avoid similar problems in the future (also on drivers that do not have the problem). Tested with modified (to reproduce this bug) myri10ge driver. Cc: stable@kernel.org # 2.6.37+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-27can: make struct proto constOliver Hartkopp
can_ioctl is the only reason for struct proto to be non-const. script/check-patch.pl suggests struct proto be const. Setting the reference to the common can_ioctl() in all CAN protocols directly removes the need to make the struct proto writable in af_can.c Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: regulator: Add MODULE_DEVICE_TABLE to max8997 and max8998 regulator: fix tps6524x section mismatch regulator: Remove more wm831x-specific IRQ operations regulator: add ab8500 enable and raise time delays regulator: provide consumer interface for fall/rise time regulator: add set_voltage_time_sel infrastructure regulator: initialization for ab8500 regulators regulator: add support for USB voltage regulator regulator: switch the ab3100 to use enable_time() Regulator: add suspend-finish API for regulator core. regulator: fix typo in Kconfig regulator: Convert WM831x regulators to genirq regulator: If we fail when setting up a supply say which supply
2011-03-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: Fix yet another race in disconnection ALSA: asihpi - Update verbose debug print macros ALSA: asihpi - Improve non-busmaster adapter operation ALSA: asihpi - Support single-rate no-SRC cards ALSA: HDA: New AD1984A model for Dell Precision R5500 ALSA: vmalloc buffers should use normal mmap ALSA: hda - Fix SPDIF out regression on ALC889 ALSA: usb-audio - Support for Boss JS-8 Jam Station ALSA: usb-audio: add Cakewalk UM-1G support sound/oss/opl3: validate voice and channel indexes sound/oss: remove offset from load_patch callbacks
2011-03-27Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Clean up max8997 IRQ namespace mfd: Fold irq_set_chip/irq_set_handler mfd: Cleanup irq namespace mfd: twl6030: Cleanup interrupt handling mfd: twl4030: Cleanup interrupt handling mfd: mx8925: Remove irq_desc leftovers mfd: htc-i2cpld: Cleanup interrupt handling mfd: htc-egpio: Cleanup interrupt handling mfd: ezx-pcap: Remvove open coded irq handling mfd: 88pm860x: Remove unused irq_desc leftovers mfd: asic3: Cleanup irq handling mfd: Select MFD_CORE if TPS6105X driver is configured mfd: Add MODULE_DEVICE_TABLE to rdc321x-southbridge mfd: Add MAX8997/8966 IRQ control mfd: Constify i2c_device_id tables mfd: OLPC: Clean up names to match what OLPC actually uses mfd: Add mfd_clone_cell(), convert cs5535-mfd/olpc-xo1 to it
2011-03-27Merge branch 'for-2.6.39/drivers' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-2.6.39/drivers' of git://git.kernel.dk/linux-2.6-block: (122 commits) cciss: fix lost command issue drbd: need include for bitops functions declarations Revert "cciss: Add missing allocation in scsi_cmd_stack_setup and corresponding deallocation" cciss: fix missed command status value CMD_UNABORTABLE cciss: remove unnecessary casts cciss: Mask off error bits of c->busaddr in cmd_special_free when calling pci_free_consistent cciss: Inform controller we are using 32-bit tags. cciss: hoist tag masking out of loop cciss: Add missing allocation in scsi_cmd_stack_setup and corresponding deallocation cciss: export resettable host attribute drbd: drop code present under #ifdef which is relevant to 2.6.28 and below drbd: Fixed handling of read errors on a 'VerifyS' node drbd: Fixed handling of read errors on a 'VerifyT' node drbd: Implemented real timeout checking for request processing time drbd: Remove unused function atodb_endio() drbd: improve log message if received sector offset exceeds local capacity drbd: kill dead code drbd: don't BUG_ON, if bio_add_page of a single page to an empty bio fails drbd: Removed left over, now wrong comments drbd: serialize admin requests for new verify run with pending bitmap io ...
2011-03-27Merge branch 'for-linus-1' of git://git.infradead.org/mtd-2.6Linus Torvalds
* 'for-linus-1' of git://git.infradead.org/mtd-2.6: (49 commits) mtd: mtdswap: fix compilation warning mtdswap: kill strict error handling option mtd: nand: enable software BCH ECC in nand simulator mtd: nand: add software BCH ECC support mtd: fix printf format warnings, mostly lack of %zd for size_t, in mtdswap mtd: sm_rtl: check kmalloc return value mtd: cfi: add support for AMIC flashes (e.g. A29L160AT) lib: add shared BCH ECC library mtd: mxc_nand: fix OOB corruption when page size > 2KiB mtd: DaVinci: Removed header file that is not required mtd: pxa3xx_nand: clean the keep configure code mtd: pxa3xx_nand: mtd scan id process could be defined by driver itself mtd: pxa3xx_nand: unify prepare command mtd: pxa3xx_nand: discard wait_for_event,write_cmd,__readid function mtd: pxa3xx_nand: rework irq logic mtd: pxa3xx_nand: make scan procedure more clear mtd: speedtest: fix integer overflow mtd: mxc_nand: fix read past buffer end mtd: omap3: nand: report corrected ecc errors jffs2: remove a trailing white space in commentaries ...
2011-03-27rose: Add length checks to CALL_REQUEST parsingBen Hutchings
Define some constant offsets for CALL_REQUEST based on the description at <http://www.techfest.com/networking/wan/x25plp.htm> and the definition of ROSE as using 10-digit (5-byte) addresses. Use them consistently. Validate all implicit and explicit facilities lengths. Validate the address length byte rather than either trusting or assuming its value. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-27dst: Clone child entry in skb_dst_popSteffen Klassert
We clone the child entry in skb_dst_pop before we call skb_dst_drop(). Otherwise we might kill the child right before we return it to the caller. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-27NFS: Fix a hang in the writeback pathTrond Myklebust
Now that the inode scalability patches have been merged, it is no longer safe to call igrab() under the inode->i_lock. Now that we no longer call nfs_clear_request() until the nfs_page is being freed, we know that we are always holding a reference to the nfs_open_context, which again holds a reference to the path, and so the inode cannot be freed until the last nfs_page has been removed from the radix tree and freed. We can therefore skip the igrab()/iput() altogether. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-27genirq: Split irq_set_affinity() so it can be called with lock held.David Daney
The .irq_cpu_online() and .irq_cpu_offline() functions may need to adjust affinity, but they are called with the descriptor lock held. Create __irq_set_affinity_locked() which is called with the lock held. Make irq_set_affinity() just a wrapper that acquires the lock. [ tglx: Changed the argument to irq_data, added a !desc check and moved the !irq_set_affinity check where it belongs ] Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Cc: ralf@linux-mips.org LKML-Reference: <1301081931-11240-4-git-send-email-ddaney@caviumnetworks.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-27genirq: Add chip flag for restricting cpu_on/offline callsThomas Gleixner
Add a flag which indicates that the on/offline callback should only be called on enabled interrupts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-27genirq: Add chip hooks for taking CPUs on/off line.David Daney
[ tglx: Removed the enabled argument as this is now available in irq_data ] Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Cc: ralf@linux-mips.org LKML-Reference: <1301081931-11240-3-git-send-email-ddaney@caviumnetworks.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-27genirq: Add irq disabled flag to irq_data stateThomas Gleixner
Some irq_chip implementation require to know the disabled state of the interrupt in certain callbacks. Add a state flag and accessor to irq_data. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-27mfd: Add MAX8997/8966 IRQ controlMyungJoo Ham
This patch enables IRQ handling for MAX8997/8966 chips. Please note that Fuel-Gauge-related IRQs are not implemented in this initial release. The fuel gauge module in MAX8997 is identical to MAX17042, which is already in Linux kernel. In order to use the already-existing MAX17042 driver for fuel gauge module in MAX8997, the main interrupt handler of MAX8997 should relay related interrupts to MAX17042 driver. However, in order to do this, we need to modify MAX17042 driver as well because MAX17042 driver does not have any interrupt handlers for now. We are not going to implement this in this initial release as it is not crucial in basic operations of MAX8997. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-27mfd: Add mfd_clone_cell(), convert cs5535-mfd/olpc-xo1 to itAndres Salomon
Replace mfd_shared_platform_driver_register with mfd_clone_cell. The former was called by an mfd client, and registered both a platform driver and device. The latter is called by an mfd driver, and registers only a platform device. The downside of this is that mfd drivers need to be modified whenever new clients are added that share a cell; the upside is that it fits Linux's driver model better. It's also simpler. This also converts cs5535-mfd/olpc-xo1 from the old API. cs5535-mfd now creates the olpc-xo1-{acpi,pms} devices, while olpc-xo1 binds to them via platform drivers. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-26mmc: tmio_mmc: Move some defines into a shared headerSimon Horman
Also add TMIO_BBS. This allows these defines to also be used by zboot. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-26regulator: provide consumer interface for fall/rise timeLinus Walleij
This exposes the functionality for rise/fall fime when setting voltage to the consumers. Cc: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-26regulator: add set_voltage_time_sel infrastructureLinus Walleij
This makes it possible to set the stabilization time for voltage regulators in the same manner as enable_time(). The interface only supports regulators that implements fixed selectors. Cc: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-26regulator: initialization for ab8500 regulatorsBengt Jonsson
The regulators on the AB8500 have a lot of custom hardware control settings pertaining to 8 external signals, settings which are board-specific and need be provided from the platform at startup. Initialization added for regulators Vana, VextSupply1, VextSupply2, VextSupply3, Vaux1, Vaux2, Vaux3, VTVout, Vintcore12, Vaudio, Vdmic, Vamic1, Vamic2, VrefDDR. Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Reviewed-by: Rickard Andersson <rickard.andersson@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-26regulator: add support for USB voltage regulatorBengt Jonsson
Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-26Regulator: add suspend-finish API for regulator core.MyungJoo Ham
The regulator core had suspend-prepare that turns off the regulators when entering a system-wide suspend. However, it did not have suspend-finish that pairs with suspend-prepare and the regulator core has assumed that the regulator devices and their drivers support autonomous recover at resume. This patch adds regulator_suspend_finish that pairs with the previously-existed regulator_suspend_prepare. The function regulator_suspend_finish turns on the regulators that have always_on set or positive use_count so that we can reset the regulator states appropriately at resume. In regulator_suspend_finish, if has_full_constraints, it disables unnecessary regulators. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Updates v3 comments corrected (Thanks to Igor) v2 disable unnecessary regulators (Thanks to Mark) Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-25Merge branch 'syscore' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'syscore' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: Introduce ARCH_NO_SYSDEV_OPS config option (v2) cpufreq: Use syscore_ops for boot CPU suspend/resume (v2) KVM: Use syscore_ops instead of sysdev class and sysdev PCI / Intel IOMMU: Use syscore_ops instead of sysdev class and sysdev timekeeping: Use syscore_ops instead of sysdev class and sysdev x86: Use syscore_ops instead of sysdev classes and sysdevs
2011-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (55 commits) [SCSI] tcm_loop: Add multi-fabric Linux/SCSI LLD fabric module [SCSI] qla4xxx: Use polling mode for disable interrupt mailbox completion [SCSI] Revert "[SCSI] Retrieve the Caching mode page" [SCSI] bnx2fc: IO completion not processed due to missed wakeup [SCSI] qla4xxx: Update driver version to 5.02.00-k6 [SCSI] qla4xxx: masking required bits of add_fw_options during initialization [SCSI] qla4xxx: added new function qla4xxx_relogin_all_devices [SCSI] qla4xxx: add support for ql4xsess_recovery_tmo cmd line param [SCSI] qla4xxx: Add support for ql4xmaxqdepth command line parameter [SCSI] qla4xxx: cleanup function qla4xxx_process_ddb_changed [SCSI] qla4xxx: Prevent other port reinitialization during remove_adapter [SCSI] qla4xxx: remove unused ddb flag DF_NO_RELOGIN [SCSI] qla4xxx: cleanup DDB relogin logic during initialization [SCSI] qla4xxx: Do not retry ISP82XX initialization if H/W state is failed [SCSI] qla4xxx: Do not send mbox command if FW is in failed state [SCSI] qla4xxx: cleanup qla4xxx_initialize_ddb_list() [SCSI] ses: add subenclosure support [SCSI] bnx2fc: Bump version to 1.0.1 [SCSI] bnx2fc: Remove unnecessary module state checks [SCSI] bnx2fc: Fix MTU issue by using static MTU ...
2011-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (56 commits) route: Take the right src and dst addresses in ip_route_newports ipv4: Fix nexthop caching wrt. scoping. ipv4: Invalidate nexthop cache nh_saddr more correctly. net: fix pch_gbe section mismatch warning ipv4: fix fib metrics mlx4_en: Removing HW info from ethtool -i report. net_sched: fix THROTTLED/RUNNING race drivers/net/a2065.c: Convert release_resource to release_region/release_mem_region drivers/net/ariadne.c: Convert release_resource to release_region/release_mem_region bonding: fix rx_handler locking myri10ge: fix rmmod crash mlx4_en: updated driver version to 1.5.4.1 mlx4_en: Using blue flame support mlx4_core: reserve UARs for userspace consumers mlx4_core: maintain available field in bitmap allocator mlx4: Add blue flame support for kernel consumers mlx4_en: Enabling new steering mlx4: Add support for promiscuous mode in the new steering model. mlx4: generalization of multicast steering. mlx4_en: Reporting HW revision in ethtool -i ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-27 19:21:40 +0000