summaryrefslogtreecommitdiff
path: root/drivers/usb/serial/ti_usb_3410_5052.c
AgeCommit message (Collapse)Author
2012-01-13module_param: make bool parameters really bool (drivers & misc)Rusty Russell
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-11-15USB: serial: remove unnecessary reinitialisations of urb fieldsJohan Hovold
Remove unnecessary reinitialisations of completion and context fields of urbs. Compile-only tested. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: serial: remove unnecessary reinitialisations of urb->devJohan Hovold
Remove unnecessary reinitialisations of urb->dev before each submission, which were based on the (no longer valid) assumption that serial->dev will be set to NULL on close. Compile-only tested. Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Peter Berger <pberger@brimson.com> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Support Department <support@connecttech.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-14USB: TI 3410/5052 USB Serial Driver: Fix mem leak when firmware is too big.Jesper Juhl
If the size of the firmware exceeds TI_FIRMWARE_BUF_SIZE we'll leak 'fw_p' by failing to call release_firmware(). This patch fixes the leak. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-24Merge 2.6.38-rc6 into tty-nextGreg Kroah-Hartman
This was to resolve a merge issue with drivers/char/Makefile and drivers/tty/serial/68328serial.c Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17tty: remove filp from the USB tty ioctlsAlan Cox
We don't use it so we can trim it from here as we try and stamp the file object dependencies out of the serial code. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17tiocmset: kill the file pointer argumentAlan Cox
Doing tiocmget was such fun we should do tiocmset as well for the same reasons Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17tiocmget: kill off the passing of the struct fileAlan Cox
We don't actually need this and it causes problems for internal use of this functionality. Currently there is a single use of the FILE * pointer. That is the serial core which uses it to check tty_hung_up_p. However if that is true then IO_ERROR is also already set so the check may be removed. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03USB: ti_usb: fix module removalIonut Nicu
If usb_deregister() is called after usb_serial_deregister() when the device is plugged in, the following Oops occurs: [ 95.337377] BUG: unable to handle kernel NULL pointer dereference at 00000010 [ 95.338236] IP: [<c0776b2d>] klist_put+0x12/0x62 [ 95.338356] *pdpt = 000000003001a001 *pde = 0000000000000000 [ 95.338356] Oops: 0000 [#1] SMP [ 95.340499] last sysfs file: /sys/devices/pci0000:00/0000:00:1d.2/usb8/idVendor [ 95.340499] Modules linked in: ti_usb_3410_5052(-) usbserial cpufreq_ondemand acpi_cpufreq mperf iptable_nat nf_nat iptable_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables ipv6 uinput arc4 ecb iwlagn iwlcore mac80211 cfg80211 microcode pcspkr acer_wmi joydev wmi sky2 [last unloaded: scsi_wait_scan] [ 95.341908] [ 95.341908] Pid: 1532, comm: modprobe Not tainted 2.6.37-rc7+ #6 Eiger /Aspire 5930 [ 95.341908] EIP: 0060:[<c0776b2d>] EFLAGS: 00010246 CPU: 0 [ 95.341908] EIP is at klist_put+0x12/0x62 [ 95.341908] EAX: 00000000 EBX: eedc0c84 ECX: c09c21b4 EDX: 00000001 [ 95.341908] ESI: 00000000 EDI: efaa0c1c EBP: f214fe2c ESP: f214fe1c [ 95.341908] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 95.341908] Process modprobe (pid: 1532, ti=f214e000 task=efaaf080 task.ti=f214e000) [ 95.341908] Stack: [ 95.341908] f214fe24 eedc0c84 efaaf080 efaa0c1c f214fe34 c0776ba8 f214fe5c c0776c76 [ 95.341908] c09c21b4 c09c21b4 eedc0c84 efaaf080 00000000 c0634398 eafe2d1c f7b515f0 [ 95.341908] f214fe6c c0631b5c eafe2d50 eafe2d1c f214fe7c c0631ba2 eafe2d1c eafe2c00 [ 95.341908] Call Trace: [ 95.341908] [<c0776ba8>] ? klist_del+0xd/0xf [ 95.341908] [<c0776c76>] ? klist_remove+0x48/0x74 [ 95.341908] [<c0634398>] ? devres_release_all+0x49/0x51 [ 95.341908] [<c0631b5c>] ? __device_release_driver+0x7b/0xa4 [ 95.341908] [<c0631ba2>] ? device_release_driver+0x1d/0x28 [ 95.341908] [<c06317c4>] ? bus_remove_device+0x92/0xa1 [ 95.341908] [<c062f3d8>] ? device_del+0xf9/0x13e [ 95.341908] [<f7b06146>] ? usb_serial_disconnect+0xd9/0x116 [usbserial] [ 95.341908] [<c0681e3f>] ? usb_disable_interface+0x32/0x40 [ 95.341908] [<c0683972>] ? usb_unbind_interface+0x48/0xfd [ 95.341908] [<c0631b43>] ? __device_release_driver+0x62/0xa4 [ 95.341908] [<c06320b9>] ? driver_detach+0x62/0x81 [ 95.341908] [<c0631a41>] ? bus_remove_driver+0x8f/0xae [ 95.341908] [<c063214c>] ? driver_unregister+0x50/0x57 [ 95.341908] [<c0682f95>] ? usb_deregister+0x77/0x84 [ 95.341908] [<f7b505b6>] ? ti_exit+0x26/0x28 [ti_usb_3410_5052] [ 95.341908] [<c046a307>] ? sys_delete_module+0x181/0x1de [ 95.341908] [<c04e2727>] ? path_put+0x1a/0x1d [ 95.341908] [<c047f4c5>] ? audit_syscall_entry+0x116/0x138 [ 95.341908] [<c04094df>] ? sysenter_do_call+0x12/0x28 [ 95.341908] Code: 00 83 7d f0 00 74 09 85 f6 74 05 89 f0 ff 55 f0 8b 43 04 5a 5b 5e 5f 5d c3 55 89 e5 57 56 53 89 c3 83 ec 04 8b 30 83 e6 fe 89 f0 <8b> 7e 10 88 55 f0 e8 47 26 01 00 8a 55 f0 84 d2 74 17 f6 03 01 [ 95.341908] EIP: [<c0776b2d>] klist_put+0x12/0x62 SS:ESP 0068:f214fe1c [ 95.341908] CR2: 0000000000000010 [ 95.342357] ---[ end trace 8124d00ad871ad18 ]--- Signed-off-by: Ionut Nicu <ionut.nicu@mindbit.ro> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22tty: Convert the USB drivers to the new icount interfaceAlan Cox
Simple pasting job using the new ops function. Also fix a couple of devices directly returning the internal struct (which happens at this point to match for the fields that matter but isn't correct or futureproof) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: ti_usb: use kfifo to implement write bufferingJohan Hovold
Kill custom fifo implementation. Compile-only tested. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: ti_usb: fix printk format warningRandy Dunlap
Fix printk format warning in usbserial/ti_usb: drivers/usb/serial/ti_usb_3410_5052.c:1738: warning: format '%d' expects type 'int', but argument 5 has type 'size_t' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: ti_usb_3410_5052: adding multitech dialup fax/modem devicesAlex Manoussakis
The following patch adds support for Multitech Systems' MT9234MU and MT9234ZBA usb dialup fax modems. It is based on a patch and firmware provided to me by Multitech Systems' support, after I reported to them that my MT9234MU modem was not working with recent linux kernels. Signed-off-by: Alex Manoussakis <alex@juniper.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: tty: Prune uses of tty_request_room in the USB layerAlan Cox
We have lots of callers that do not need to do this in the first place. Remove the calls as they both cost CPU and for big buffers can mess up the multi-page allocation avoidance. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19tty: USB does not need the filp argument in the driversAlan Cox
And indeed none of them use it. Clean this up as it will make moving to a standard open method rather easier. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-20tty: fix chars_in_buffersAlan Cox
This function does not have an error return and returning an error is instead interpreted as having a lot of pending bytes. Reported by Jeff Harris who provided a list of some of the remaining offenders. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-12USB: fix uninitialised variable in ti_do_downloadOliver Neukum
Signed-off-by: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-12USB: ti_usb_3410_5052: fix duplicate device ids.Greg Kroah-Hartman
commit 1a1fab513734b3a4fca1bee8229e5ff7e1cb873c accidentally added the device id to both tables in the driver, which causes problems as this is only a single port device, not a multiple port device. Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15USB: usb-serial: replace shutdown with disconnect, releaseAlan Stern
This patch (as1254) splits up the shutdown method of usb_serial_driver into a disconnect and a release method. The problem is that the usb-serial core was calling shutdown during disconnect handling, but drivers didn't expect it to be called until after all the open file references had been closed. The result was an oops when the close method tried to use memory that had been deallocated by shutdown. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-11tty: Bring the usb tty port structure into more useAlan Cox
This allows us to clean stuff up, but is probably also going to cause some app breakage with buggy apps as we now implement proper POSIX behaviour for USB ports matching all the other ports. This does also mean other apps that break on USB will now work properly. Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-23USB: removal of tty->low_latency hack dating back to the old serial codeOliver Neukum
This removes tty->low_latency from all USB serial drivers that push data into the tty layer at hard interrupt context. It's no longer needed and actually harmful. Signed-off-by: Oliver Neukum <oliver@neukum.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-14tty: Fix leak in ti-usbAlan Cox
If the ti-usb adapter returns an zero data length frame (which happens) then we leak a kref. Found by Christoph Mair <christoph.mair@gmail.com> who proposed a patch. The patch here is different as Christoph's patch didn't work for the case where tty = NULL and data arrived but Christoph did all the hard work chasing it down. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-09USB: two more usb ids for ti_usb_3410_5052Oliver Neukum
This patch adds device IDs and balances the counts to make the hot ID additioning mechanism work. Signed-off-by: Oliver Neukum <oneukum@suse.de> Cc: stable <stable@kernel.org> Cc: Chris Adams <cmadams@hiwaay.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-27USB: new id for ti_usb_3410_5052 driverOliver Neukum
This adds a new device id Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-12ti_usb_3410_5052: add Multi-Tech firmwareChris Adams
Add the Multi-Tech cellular modem firmware to the TI USB serial driver. This firmware was extracted from: ftp://ftp.multitech.com/wireless/wireless_linux.zip Firmware licence: "all firmware components are redistributable in binary form" per support@multitech.com Copyright (C) 2005 Multi-Tech Systems, Inc. Signed-off-by: Chris Adams <cmadams@hiwaay.net> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-12ti_usb_3410_5052: add Multi-Tech modem supportChris Adams
Add Multi-Tech cellular modem support to the ti_usb_3410_5052 driver. Signed-off-by: Chris Adams <cmadams@hiwaay.net> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-12ti_usb_3410_5052: support alternate firmwareChris Adams
The TI USB serial driver supports specifying alternate vendor and product IDs (since the chips can and are used in devices under other vendor/product IDs). However, the alternate IDs were not loaded in the combined product table. This patch also adds support for loading alternate firmware for alternate vendor/product IDs. Signed-off-by: Chris Adams <cmadams@hiwaay.net> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-17USB: set correct configuration in probe of ti_usb_3410_5052Oliver Neukum
This driver transfers firmware. It may just as well set the correct configuration. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: remove info() macro from usb/serial driversGreg Kroah-Hartman
USB should not be having it's own printk macros, so remove info() and use the system-wide standard of dev_info() wherever possible. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: ti_usb_3410_5052: removed duplicated includeHuang Weiyi
Removed duplicated #include <linux/firmware.h> in drivers/usb/serial/ti_usb_3410_5052.c. Signed-off-by: Huang Weiyi <hwy@cn.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-13tty: usb-serial krefsAlan Cox
Use kref in the USB serial drivers so that we don't free tty structures from under the URB receive handlers as has historically been the case if you were unlucky. This also gives us a framework for general tty drivers to use tty_port objects and refcount. Contains two err->dev_err changes merged together to fix clashes in the -next tree. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-23usb serial: ti_usb_3410_5052 obviously broken by firmware changesChris Adams
While making some other changes to ti_usb_3410_5052, I noticed that the changes made to move the firmware loading to a separate function are broken (in ti_download_firmware(), status is set to -ENOMEM and never changed). This means the driver will never initialize the device properly. It looks like status was supposed to get the result of ti_do_download(). Signed-off-by: Chris Adams <cmadams@hiwaay.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-22tty-usb-ti-usb: Coding styleAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22usb_serial: API all changeAlan Cox
USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-10ti_usb_3410_5052: use request_firmware()David Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-24USB: remove unnecessary type casting of urb->contextMing Lei
urb->context code cleanup Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: serial: remove unneeded number endpoints settingsGreg Kroah-Hartman
The usb-serial core no longer checks these fields so remove them from all of the individual drivers. They will be removed from the usb-serial core in a patch later in the series. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: ti_usb_3410_5052: Extend locking to msr and shadow mcrAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-18drivers: Remove unnecessary inclusions of asm/semaphore.hMatthew Wilcox
None of these files use any of the functionality promised by asm/semaphore.h. It's possible that they rely on it dragging in some unrelated header file, but I can't build all these files, so we'll have fix any build failures as they come up. Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-04-02USB: serial: ti_usb_3410_5052: Correct TUSB3410 endpoint requirements.Robert Spanton
The changes introduced in commit 063a2da8f01806906f7d7b1a1424b9afddebc443 changed the semantics of the num_interrupt_in, num_interrupt_out, num_bulk_in and num_bulk_out entries of the usb_serial_driver struct to be the number of endpoints the device has when probed. This patch changes the ti_1port_device usb_serial_driver struct to reflect this change. The single port devices only have 1 bulk_out endpoint in their initial configuration, and so this patch changes the number of other types to NUM_DONT_CARE. The same change probably needs doing to the ti_2port_device struct, but I don't have a two port device at hand. Signed-off-by: Robert Spanton <rspanton@zepler.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: last abuses of intfdata in close for usb-serial driversOliver Neukum
these drivers abused intfdata in close() as flags for binding. That races with reprobing of those devices. This patch fixes that by using the flag and the locks introduced with the patch against mos7720. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: ti_usb: termios cleanupsAlan Cox
Remove internal NULL passing in termios code Remove all the if checks it causes Encode the baud rate back properly Clear CMSPAR as it is not supported Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: TI 3410/5052 USB Serial: convert td_open_close_lock to mutexMatthias Kaehlcke
TI 3410/5052 USB Serial: convert semaphore td_open_close_lock to the mutex API. Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-14signedness: module_param_array nump argumentAl Viro
... should be unsigned int Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12USB: serial: ti_usb_3410_5052: clean up urb->status usageGreg Kroah-Hartman
This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Cc: <linux-usb-devel@lists.sourceforge.net> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Peter Berger <pberger@brimson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-25USB: ti serial driver sleeps with spinlock heldOliver Neukum
you are submitting an URB with GFP_KERNEL holding a spinlock. In this case the spinlock can be dropped earlier. Signed-off-by: Oliver Neukum <oneukum@suse.de> Cc: Al Borchers <alborchers@steinerpoint.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB serial: add driver pointer to all usb-serial driversJohannes Hölzl
Every usb serial driver should have a pointer to the corresponding usb driver. So the usb serial core can add a new id not only to the usb serial driver, but also to the usb driver. Also the usb drivers of ark3116, mos7720 and mos7840 missed the flag no_dynamic_id=1. This is added now. Signed-off-by: Johannes Hölzl <johannes.hoelzl@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-13[PATCH] getting rid of all casts of k[cmz]alloc() callsRobert P. J. Day
Run this: #!/bin/sh for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do echo "De-casting $f..." perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f done And then go through and reinstate those cases where code is casting pointers to non-pointers. And then drop a few hunks which conflicted with outstanding work. Cc: Russell King <rmk@arm.linux.org.uk>, Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Greg KH <greg@kroah.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Karsten Keil <kkeil@suse.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Ian Kent <raven@themaw.net> Cc: Steven French <sfrench@us.ibm.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08[PATCH] tty: switch to ktermiosAlan Cox
This is the grungy swap all the occurrences in the right places patch that goes with the updates. At this point we have the same functionality as before (except that sgttyb() returns speeds not zero) and are ready to begin turning new stuff on providing nobody reports lots of bugs If you are a tty driver author converting an out of tree driver the only impact should be termios->ktermios name changes for the speed/property setting functions from your upper layers. If you are implementing your own TCGETS function before then your driver was broken already and its about to get a whole lot more painful for you so please fix it 8) Also fill in c_ispeed/ospeed on init for most devices, although the current code will do this for you anyway but I'd like eventually to lose that extra paranoia [akpm@osdl.org: bluetooth fix] [mp3@de.ibm.com: sclp fix] [mp3@de.ibm.com: warning fix for tty3270] [hugh@veritas.com: fix tty_ioctl powerpc build] [jdike@addtoit.com: uml: fix ->set_termios declaration] Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Martin Peschke <mp3@de.ibm.com> Acked-by: Peter Oberparleiter <oberpar@de.ibm.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-26 06:49:09 +0000