summaryrefslogtreecommitdiff
path: root/drivers/net/sis190.c
AgeCommit message (Collapse)Author
2005-10-28[PATCH] sis190.c: fix multicast MAC filterAurelien Jarno
Here is a patch that changes the way the MAC filter is computed for the multicast addresses. The computation is taken from the SiS GPL driver. This patch is necessary to get IPv6 working. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] sis190: basic sis191 supportFrancois Romieu
The sis191 is the gigabit brother of the sis190. SiS's driver suggests that the register set is backward compatible: this should hopefully give a basic driver. The device should allow the usual features from a modern ethernet adapter (802.1q, SG, Jumbo frames, TSO, checksum offload). So far the relevant register layout is not documented. SiS's driver does not provide these features either (at least not for Linux). Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] sis190: RGMII Tx internal delay fiddlingFrancois Romieu
Don't ask. The patch is based on SiS's GPLed driver. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] sis190: make 10Mbps the default when handling the StationControl ↵Francois Romieu
register This patch does three things: - widen the access to the StationControl register (note the SIS_W16 versus SIS_W32 change); - default to 10Mbps half duplex when the LPA can not be evaluated (reg31->ctl is identical for both). It can be argued that it makes sense as the lowest common denominator when everything else failed. Btw it works better than the current code. :o) - remove some enums: they do not document anymore. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] sis190: recent chipsets from SiS include a RGMIIFrancois Romieu
Extracted from SiS's GPLed driver. From the few pdf available at SiS's, it seems that the 965 and the 966 south bridge include this interface whereas the 965L (and anything below) does not. It is expected to be a sis191 related feature and should not hurt the existing sis190 driver. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] sis190: unmask the link change eventsFrancois Romieu
link changes reporting does not work when the driver masks its irq event Signed-off-by: Arnaud Patard <apatard@mandriva.com> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-26[PATCH] sis190: complete the mii probe before registering the netdeviceFrancois Romieu
The userspace must not be able to issue ethtool command and manage the mii before it is completely initialized. Avoid some pesky "eth%d" messages. Signed-off-by: Arnaud Patard <apatard@mandriva.com> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-30[PATCH] sis190: compare the lpa to the local advertisementFrancois Romieu
The station control register must depend on both the advertisement and the lpa The link partner ability has better be intersected with the current advertised value before it is feed to the station control register. Sight-catched-by: Lars Vahlenberg <lars.vahlenberg@gmail.com> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-30[PATCH] sis190: PHY identifier for the K8S-MX motherboard.Francois Romieu
Added PHY identifier for the Asus K8S-MX motherboard Note: the same ID appears in the sis900 driver. Signed-off-by: Lars Vahlenberg <lars.vahlenberg@gmail.com> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-30[PATCH] sis190: new PHY detection code.Francois Romieu
New PHY detection code. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-30[PATCH] sis190: dummy read is required by the status registerFrancois Romieu
Add a dummy read before accessing the status register SiS driver suggests it. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-30[PATCH] sis190: allow a non-hardcoded ID for the PHY.Francois Romieu
Allow a non-hardcoded ID for the PHY This is the first step before the driver probes for the PHY address. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-30[PATCH] sis190: add endian annotations.Francois Romieu
Add endian annotations. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-30[PATCH] sis190: extract bits definition from SiS driver.Francois Romieu
extract bits definition from SiS driver - fix the Rx stats; - minor pieces of documentation. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-30[PATCH] sis190: the size of the Rx buffer is constrainedFrancois Romieu
Add a restriction to the size of the Rx buffer SiS driver forces the size of any Rx buffer to be a multiple of 64 bit. I would not be surprized that it goes along with some alignment issues which have been experienced before. So far it does not make much of a difference (both drivers use 1536 bytes buffer). Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-30[PATCH] sis190: initialisation of MAC address.Francois Romieu
Extract some mac addr code from SiS's driver. Some magic may hide beyond the isa bridge. The Rx mac control register is now set without condition. Note: good or bad, this part of the code is quite close to sis900.c. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-30[PATCH] sis190: remove hardcoded constants.Francois Romieu
Replace hardcoded constants by enumerated values in sis190_read_eeprom The names of the enumerated values have been extracted from SiS'official driver (v1.00.00 published on 2005/07/11). Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-30[PATCH] sis190: merge some register related information from SiS driver.Francois Romieu
Merge some register related information from SiS driver. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-30[PATCH] sis190: ethtool/mii support.Francois Romieu
ethtool/mii support Bug: disabling autonegotiation and setting the link parameters at the same time does not provide the expected result. More investigation is needed. Note: past the initial probe/open time, the link is managed from user-space or accessed through sis190_phy_task, i.e. in a usermode context. Whence the very limited locking needs. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-30[PATCH] sis190: netconsole support.Francois Romieu
netconsole support. This stuff should be factored out of every driver. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-30[PATCH] sis190: resurrectionFrancois Romieu
Raise the sis190 driver from the dead The driver handles the integrated network device found on SiS 965L chipset. It follows the classical (non-napi) interrupt-driven model and provides minimal ethtool support. The code comes from a heavy cleanup/rewrite of the original code which was removed from the kernel on 14/04/2004. Since the r8169 driver does not work too bad and there will probably be (at least) a few months of improvements/testing/fixing, I made the code as close as possible to the r8169 one. Pascal Chapperon <pascal.chapperon@wanadoo.fr> deserves some special credit for testing and bug-catching. Many thanks to Lars Vahlenberg as well. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>