summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)Author
2010-08-03Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (291 commits) ARM: AMBA: Add pclk support to AMBA bus infrastructure ARM: 6278/2: fix regression in RealView after the introduction of pclk ARM: 6277/1: mach-shmobile: Allow users to select HZ, default to 128 ARM: 6276/1: mach-shmobile: remove duplicate NR_IRQS_LEGACY ARM: 6246/1: mmci: support larger MMCIDATALENGTH register ARM: 6245/1: mmci: enable hardware flow control on Ux500 variants ARM: 6244/1: mmci: add variant data and default MCICLOCK support ARM: 6243/1: mmci: pass power_mode to the translate_vdd callback ARM: 6274/1: add global control registers definition header file for nuc900 mx2_camera: fix type of dma buffer virtual address pointer mx2_camera: Add soc_camera support for i.MX25/i.MX27 arm/imx/gpio: add spinlock protection ARM: Add support for the LPC32XX arch ARM: LPC32XX: Arch config menu supoport and makefiles ARM: LPC32XX: Phytec 3250 platform support ARM: LPC32XX: Misc support functions ARM: LPC32XX: Serial support code ARM: LPC32XX: System suspend support ARM: LPC32XX: GPIO, timer, and IRQ drivers ARM: LPC32XX: Clock driver ...
2010-07-31Merge branch 'devel-stable' into develRussell King
Conflicts: arch/arm/kernel/entry-armv.S arch/arm/kernel/setup.c arch/arm/mm/init.c
2010-07-31Merge branch 'misc' into develRussell King
Conflicts: arch/arm/mm/init.c
2010-07-30ARM: Fix Versatile/Realview/VExpress MMC card detection senseRussell King
The MMC card detection sense has become really confused with negations at various levels, leading to some platforms not detecting inserted cards. Fix this by converting everything to positive logic throughout, thereby getting rid of these negations. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-29Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into ↵Russell King
devel-stable
2010-07-29ARM: 6246/1: mmci: support larger MMCIDATALENGTH registerRabin Vincent
The Ux500 variant has a 24-bit MMCIDATALENGTH register, as opposed to the 16-bit one on the ARM version. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-29ARM: 6245/1: mmci: enable hardware flow control on Ux500 variantsRabin Vincent
Although both the U300 and Ux500 use ST variants, the HWFCEN bits are at different positions, so use the variant_data to store the information. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-29ARM: 6244/1: mmci: add variant data and default MCICLOCK supportRabin Vincent
Add a variant_data structure to handle the differences between the various variants of this peripheral. Add a first quirk for a default MCICLOCK value, required on the Ux500 variant where the enable bit needs to be always set, since it controls access to some registers. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-29ARM: 6243/1: mmci: pass power_mode to the translate_vdd callbackRabin Vincent
Platforms may have some external power control which need to be controlled from board specific code. Rename the translate_vdd() callback to vdd_handler() and pass it the power mode. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6239/1: mmci: let core poll for card detectionRabin Vincent
Use the MMC core's ability to poll for card detection. This also has the advantage of doing the gpio_get_value from a workqueue instead of timer, allowing the gpio to be on a sleeping gpiochip. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6238/1: mmci: fix multi block transfersRabin Vincent
Fix the data transfer size to allow multi block transfers to work. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6237/1: mmci: use sg_miter API to fix multi-page sg handlingRabin Vincent
The mmci driver's SG list iteration logic assumes that each SG entry spans only one page, and only maps and flushes one page of the sg. This is not a valid assumption. Fix it by converting the driver to the sg_miter API, which correctly handles sgs which span multiple pages. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26mxcmmc: convert to pm_ops and enable/disable clockEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: s.hauer@pengutronix.de Cc: linux-mmc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26Merge branch 'imx/for-2.6.36' of git://git.pengutronix.de/git/ukl/linux-2.6 ↵Uwe Kleine-König
into HEAD There are some more conflicts than detected by git, namely support for the newly added cpuimx machines needed to be converted to dynamic device registration. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Conflicts: arch/arm/mach-imx/Makefile arch/arm/mach-imx/devices.c arch/arm/mach-imx/devices.h arch/arm/mach-imx/eukrea_mbimx27-baseboard.c arch/arm/mach-mx2/Kconfig arch/arm/mach-mx25/Makefile arch/arm/mach-mx25/devices.c arch/arm/plat-mxc/include/mach/mx25.h arch/arm/plat-mxc/include/mach/mxc_nand.h
2010-07-26mxcmmc: add card detect through DAT3 possibilityEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-20sdhci-s3c: add missing remove functionMarek Szyprowski
System will crash sooner or later once the memory with the code of the s3c-sdhci.ko module is reused for something else. I really have no idea how the lack of remove function went unnoticed into the mainline code. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-09mmc: msm: fix compile error on MSM7x30Daniel Walker
MSM7x30 isn't supported in this driver yet. If ones tried to compile it in with MSM7x30 configure you get, linux-2.6/drivers/mmc/host/msm_sdcc.c: In function 'msmsdcc_fifo_addr': linux-2.6/drivers/mmc/host/msm_sdcc.c:165: error: 'MSM_SDC1_PHYS' undeclared (first use in this function) linux-2.6/drivers/mmc/host/msm_sdcc.c:165: error: (Each undeclared identifier is reported only once linux-2.6/drivers/mmc/host/msm_sdcc.c:165: error: for each function it appears in.) linux-2.6/drivers/mmc/host/msm_sdcc.c:167: error: 'MSM_SDC2_PHYS' undeclared (first use in this function) linux-2.6/drivers/mmc/host/msm_sdcc.c:169: error: 'MSM_SDC3_PHYS' undeclared (first use in this function) linux-2.6/drivers/mmc/host/msm_sdcc.c:171: error: 'MSM_SDC4_PHYS' undeclared (first use in this function) So we add a Kconfig check to prevent this. Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-06-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (23 commits) sh: Make intc messages consistent via pr_fmt. sh: make sure static declaration on ms7724se sh: make sure static declaration on mach-migor sh: make sure static declaration on mach-ecovec24 sh: make sure static declaration on mach-ap325rxa clocksource: sh_cmt: compute mult and shift before registration clocksource: sh_tmu: compute mult and shift before registration sh: PIO disabling for x3proto and urquell. sh: mach-sdk7786: conditionally disable PIO support. sh: support for platforms without PIO. usb: r8a66597-hcd pio to mmio accessor conversion. usb: gadget: r8a66597-udc pio to mmio accessor conversion. usb: gadget: m66592-udc pio to mmio accessor conversion. sh: add romImage MMCIF boot for sh7724 and Ecovec V2 sh: add boot code to MMCIF driver header sh: prepare MMCIF driver header file sh: allow romImage data between head.S and the zero page sh: Add support MMCIF for ecovec sh: remove duplicated #include input: serio: disable i8042 for non-cayman sh platforms. ...
2010-06-04omap: remove BUG_ON for disabled interruptsCory Maccarrone
Remove a BUG_ON for when interrupts are disabled during an MMC request. During boot, interrupts can be disabled when a request is made, causing this bug to be triggered. In reality, there's no reason this should halt the kernel, as the driver has proved reliable in spite of disabled interrupts, and additionally, there's nothing in this code that would require interrupts to be enabled. The only setup I've managed to make it trigger on is on the HTC Herald during bootup when the driver is built into the kernel (mostly because that's all I have). I believe it's related to the fact that on bootup I get many timeout errors on "CMD5" while initializing the card. Each CMD5 timeout triggers that bug (I changed it to a WARN_ON to get it to boot in) due to the fact that part of the timeout code involves sending the request again. With interrupts turned off, that BUG would be triggered. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-31sh: prepare MMCIF driver header fileMagnus Damm
Update the MMCIF driver to include register information and register access functions in the header file. The MMCIF boot code builds on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-27drivers/mmc/host: use ERR_CASTJulia Lawall
Use ERR_CAST(x) rather than ERR_PTR(PTR_ERR(x)). The former makes more clear what is the purpose of the operation, which otherwise looks like a no-op. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; T x; identifier f; @@ T f (...) { <+... - ERR_PTR(PTR_ERR(x)) + x ...+> } @@ expression x; @@ - ERR_PTR(PTR_ERR(x)) + ERR_CAST(x) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27sdhci-spear: ST SPEAr based SDHCI controller glueViresh KUMAR
Add a glue layer to support the sdhci driver on the ST SPEAr platform. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Cc: <shiraz.hashim@st.com> Cc: Linus Walleij <linus.ml.walleij@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27sdio: add new function for RAW (Read after Write) operationGrazvydas Ignotas
SDIO specification allows RAW (Read after Write) operation using IO_RW_DIRECT command (CMD52) by setting the RAW bit. This operation is similar to ordinary read/write commands, except that both write and read are performed using single command/response pair. The Linux SDIO layer already supports this internaly, only external function is missing for drivers to make use, which is added by this patch. This type of command is required to implement proper power save mode support in wl1251 wifi driver. Android has similar patch for G1 in it's tree for the same reason: http://android.git.kernel.org/?p=kernel/common.git;a=commitdiff;h=74a47786f6ecbe6c1cf9fb15efe6a968451deb52 Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Kalle Valo <kalle.valo@iki.fi> Cc: Dmitry Shmidt <dimitrysh@google.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27mmc: remove the "state" argument to mmc_suspend_host()Matt Fleming
Even though many mmc host drivers pass a pm_message_t argument to mmc_suspend_host() that argument isn't used the by MMC core. As host drivers are converted to dev_pm_ops they'll have to construct pm_message_t's (as they won't be passed by the PM subsystem any more) just to appease the mmc suspend interface. We might as well just delete the unused paramter. Signed-off-by: Matt Fleming <matt@console-pimps.org> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Acked-by: Michal Miroslaw <mirq-linux@rere.qmqm.pl>ZZ Acked-by: Sascha Sommer <saschasommer@freenet.de> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27mmc: OMAP HS-MMC: convert to dev_pm_opsKevin Hilman
Convert PM operations to use dev_pm_ops. This will facilitate the runtime PM coversion which will add to dev_pm_ops hooks. Note that dev_pm_ops version of the suspend hook no longer takes a 'state' argument. However, the MMC core function mmc_suspend_host() still takes a 'state' argument, but it is unused, so a dummy state variable was created to pass to the MMC core. In the future, the MMC core should be converted to drop this state argument and the rest of the MMC drivers could be easily converted to dev_pm_ops as well. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Matt Fleming <matt@console-pimps.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Denis Karpov <ext-denis.2.karpov@nokia.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27omap_hsmmc: improve interrupt synchronisationAdrian Hunter
The following changes were needed: - do not use in_interrupt() because it will not work with threaded interrupts In addition, the following improvements were made: - ensure DMA is unmapped only after the final DMA interrupt - ensure a request is completed only after the final DMA interrupt - disable controller interrupts when a request is not in progress - remove the spin-lock protecting the start of a new request from an unexpected interrupt because the locking was complicated and a 'req_in_progress' flag suffices (since the spin-lock only defers the unexpected interrupts anyway) - instead use the spin-lock to protect the MMC interrupt handler from the DMA interrupt handler - remove the semaphore preventing DMA from being started while the previous DMA is still in progress - the other changes make that impossible, so it is now a BUG_ON condition - ensure the controller interrupt status is clear before exiting the interrrupt handler In general, these changes make the code safer but do not fix any specific bugs so backporting is not necessary. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Tested-by: Venkatraman S <svenkatr@ti.com> Acked-by: Madhusudhan Chikkature <madhu.cr@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27sdhci: enable multiblock transfers in sdhci-s3cMaurus Cuelenaere
Wifi over SDIO doesn't work correctly without multiblock, so enable this. This patch depends on the following patches: Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Cc: Thomas Abraham <thomas.ab@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27mmc: s3c6410: enable ADMA feature in 6410 sdhci controllerThomas Abraham
Enable the ADMA feature in the 6410 SDHCI controller driver. Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27mmc: s3c6410: add new quirk in sdhci driver and update ADMA descriptor buildThomas Abraham
The s3c6410 sdhci controller does not support the 'End' attribute and NOP attribute in the same 8-Byte ADMA descriptor. This patch adds a new quirk to identify sdhci host contollers with such behaviour. In addition to this, for controllers using the new quirk, the last entry in the ADMA descritor table is marked with the 'End' attribute (instead of using a NOP descriptor with 'End' attribute). Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27sdhci: build fix: rename SDHCI I/O accessor functionsMatt Fleming
Unfortunately some architectures #define their read{b,w,l} and write{b,w,l} I/O accessors which makes the SDHCI I/O accessor functions of the same names subject to preprocessing. This leads to the following compiler error, In file included from drivers/mmc/host/sdhci.c:26: drivers/mmc/host/sdhci.h:318:35: error: macro "writel" passed 3 arguments, but takes just 2 Rename the SDHCI I/O functions so that CONFIG_MMC_SDHCI_IO_ACCESSORS can be enabled for architectures that implement their read{b,w,l} and write{b,w,l} functions with macros. Signed-off-by: Matt Fleming <matt@console-pimps.org> Cc: Zhangfei Gao <zgao6@marvell.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Ben Dooks <ben-linux@fluff.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27mmc: SDHCI_INT_DATA_MASK typo errorZhangfei Gao
Signed-off-by: Zhangfei Gao <zgao6@marvell.com> Reviewed-by: Matt Fleming <matt@console-pimps.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27mmc: atmel-mci: Add support for SDIO interruptsAnders Grahn
Atmel-mci support for SDIO interrupts. This adds the enable_sdio_irq() function and the configuration of sdio irq mask per slot. With this irq mask information, we keep the idea of multiple slot per sd/mmc host (not only A and B). MMC_CAP_SDIO_IRQ is added according to slot configuration. A new little function is added to run mmc_signal_sdio_irq() during interrupt handling routine. Signed-off-by: Anders Grahn <anders.grahn@hd-wireless.se> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27mmc: add support MMCIF for SuperHYusuke Goda
MMCIF is the MMC Host Interface in SuperH. Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27mmc: atmel-mci: enable SD high speed supportNicolas Ferre
Enable high speed support for atmel-mci driver. This support is dependent of the revision of the IP and, of course, the capacity of the SD card used. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: Maciej Sosnowski <maciej.sosnowski@intel.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27mmc: sd: clean up redundant memsetMark Asselstine
The clearing of mrq via a memset at the top of the for loop in mmc_wait_for_app_cmd() is not required as mrq is not used and there is another clearing of mrq just below. We remove the first memset since if the initial tests in the for loop fail the memset is not required. Signed-off-by: Mark Asselstine <asselsm@gmail.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27davinci: mmc: updates to suspend/resume implementationChaithrika U S
Improve the suspend and resume callbacks in DaVinci MMC host controller driver. Modify the reset status of the contorller and clock during suspend and resume. Also migrate the power management callbacks from platform driver to dev_pm_ops structure. Tested on DA850/OMAP-L138 EVM. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Chaithrika U S <chaithrika@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Cc: Vipin Bhandari <vipin.bhandari@ti.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27davinci: mmc: add a function to control reset state of the controllerChaithrika U S
Add a helper function which will aid in changing the reset status of the controller. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Cc: Vipin Bhandari <vipin.bhandari@ti.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27sdhci-pltfm: do not print errors in case of an extended iomem sizeAnton Vorontsov
Some hosts have an extended SDHCI iomem size, so the driver should only print errors if the iomem size is less than 0x100. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Richard Röjfors <richard.rojfors@pelagicore.com> Cc: David Vrabel <david.vrabel@csr.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Ben Dooks <ben@simtec.co.uk> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27sdhci-pltfm: implement platform data passingAnton Vorontsov
This includes platform ops, quirks and (de)initialization callbacks. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Richard Röjfors <richard.rojfors@pelagicore.com> Cc: David Vrabel <david.vrabel@csr.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Ben Dooks <ben@simtec.co.uk> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27sdhci: implement CAP_CLOCK_BASE_BROKEN quirkAnton Vorontsov
Some hosts (e.g. as found in CNS3xxx SOCs) report wrong value in CLOCK_BASE capability field, and currently there is no way to force the SDHCI core to use the platform-provided base clock value. This patch implements CAP_CLOCK_BASE_BROKEN quirk. When enabled, the SDHCI core will always use base clock frequency provided by the platform. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Richard Röjfors <richard.rojfors@pelagicore.com> Cc: David Vrabel <david.vrabel@csr.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Ben Dooks <ben@simtec.co.uk> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27mmc-omap: add support for 16-bit and 32-bit registersMarek Belisko
The omap850 and omap730 use 16-bit registers instead of 32-bit, requiring a modification of the register addresses in the mmc-omap driver. To resolve this, a bit shift is performed on base register addresses, either by 1 or 2 bits depending on the CPU in use. This yields the correct registers for each CPU. Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com> Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: Ben Dooks <ben@fluff.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27davinci: mmc: pass number of SG segments as platform dataSudhakar Rajashekhara
On some platforms like DM355, the number of EDMA parameter slots available for EDMA_SLOT_ANY usage are few. In such cases, if MMC/SD uses 16 slots for each instance of MMC controller, then the number of slots available for other modules will be very few. By passing the number of EDMA slots to be used in MMC driver from platform data, EDMA slots available for other purposes can be controlled. Most of the platforms will not use this platform data variable. But on DM355, as the number of EDMA resources available is limited, the number of scatter- gather segments used inside the MMC driver can be 8 (passed as platform data) instead of 16. On DM355, when the number of scatter-gather segments was reduced to 8, I saw a performance difference of about 0.25-0.4 Mbytes/sec during write. Read performance variations were negligible. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (103 commits) ARM: 6141/1: Add audio support part in arch/arm/mach-w90x900 ARM: 5939/1: ARM: Add option CMDLINE_FORCE to force usage of the in-kernel cmdline ARM: 6140/1: silence a bogus sparse warning in unwind.c ARM: mach-at91: duplicated include ARM: arch/arm/nwfpe/fpsr.h: Checkpatch cleanup ARM: arch/arm/mach-shark/pci.c: Checkpatch cleanup ARM: arch/arm/nwfpe/ChangeLog: Checkpatch cleanup ARM: arch/arm/mach-sa1100/leds.c: Checkpatch cleanup ARM: arch/arm/mach-h720x/common.h: Checkpatch cleanup ARM: arch/arm/mach-footbridge/ebsa285-pci.c: Checkpatch cleanup ARM: arch/arm/mach-clps711x/Makefile.boot: Checkpatch cleanup ARM: arch/arm/boot/bootp/bootp.lds: Checkpatch cleanup ARM: SPEAR6xx: remove duplicated #include ARM: s3c6400_defconfig: Add NAND driver ARM: s3c6400_defconfig: enable sound as modules ARM: s3c6400_defconfig: enable power management ARM: s5pv210_defconfig: Update s5pv210_defconfig to v2.6.34 ARM: s5pc110_defconfig: Update s5pc110_defconfig to v2.6.34 ARM: s5p6442_defconfig: Update s5p6442_defconfig to v2.6.34 ARM: s5p6440_defconfig: Update s5p6440_defconfig to v2.6.34 ...
2010-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (25 commits) sh: fix up sh7785lcr_32bit_defconfig. arch/sh/lib/strlen.S: Checkpatch cleanup sh: fix up sh7786 dmaengine build. sh: guard cookie consistency across termination in the DMA driver sh: prevent the DMA driver from unloading, while in use sh: fix Oops in the serial SCI driver sh: allow platforms to specify SD-card supported voltages mmc: let MFD's provide supported Vdd card voltages to tmio_mmc sh: disable SD-card write-protection detection on kfr2r09 mfd: pass platform flags down to the tmio_mmc driver tmio: add a platform flag to disable card write-protection detection sh: Add SDHI DMA support to migor sh: Add SDHI DMA support to kfr2r09 sh: Add SDHI DMA support to ms7724se sh: Add SDHI DMA support to ecovec mmc: add DMA support to tmio_mmc driver, when used on SuperH sh: prepare the SDHI MFD driver to pass DMA configuration to tmio_mmc.c mmc: prepare tmio_mmc for passing of DMA configuration from the MFD cell sh: add DMA slave definitions to sh7724 sh: add DMA slaves for two SDHI controllers to sh7722 ...
2010-05-22mmc: let MFD's provide supported Vdd card voltages to tmio_mmcGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-22tmio: add a platform flag to disable card write-protection detectionGuennadi Liakhovetski
Write-protection status is not always available, e.g., micro-SD cards do not have a write-protection switch at all. This patch adds a flag to let platforms force tmio_mmc to consider the card writable. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-22mmc: add DMA support to tmio_mmc driver, when used on SuperHGuennadi Liakhovetski
SDHI controllers on SuperH, served by the tmio_mmc driver, can use slave DMA for data transfer. This patch adds support for the dmaengine API to the tmio_mmc driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-22Merge remote branch 'origin' into secretlab/next-devicetreeGrant Likely
Merging in current state of Linus' tree to deal with merge conflicts and build failures in vio.c after merge. Conflicts: drivers/i2c/busses/i2c-cpm.c drivers/i2c/busses/i2c-mpc.c drivers/net/gianfar.c Also fixed up one line in arch/powerpc/kernel/vio.c to use the correct node pointer. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-22of: Remove duplicate fields from of_platform_driverGrant Likely
.name, .match_table and .owner are duplicated in both of_platform_driver and device_driver. This patch is a removes the extra copies from struct of_platform_driver and converts all users to the device_driver members. This patch is a pretty mechanical change. The usage model doesn't change and if any drivers have been missed, or if anything has been fixed up incorrectly, then it will fail with a compile time error, and the fixup will be trivial. This patch looks big and scary because it touches so many files, but it should be pretty safe. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sean MacLennan <smaclennan@pikatech.com>
2010-05-21Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: DMAENGINE: extend the control command to include an arg async_tx: trim dma_async_tx_descriptor in 'no channel switch' case DMAENGINE: DMA40 fix for allocation of logical channel 0 DMAENGINE: DMA40 support paused channel status dmaengine: mpc512x: Use resource_size DMA ENGINE: Do not reset 'private' of channel ioat: Remove duplicated devm_kzalloc() calls for ioatdma_device ioat3: disable cacheline-unaligned transfers for raid operations ioat2,3: convert to producer/consumer locking ioat: convert to circ_buf DMAENGINE: Support for ST-Ericssons DMA40 block v3 async_tx: use of kzalloc/kfree requires the include of slab.h dmaengine: provide helper for setting txstate DMAENGINE: generic channel status v2 DMAENGINE: generic slave control v2 dma: timb-dma: Update comment and fix compiler warning dma: Add timb-dma DMAENGINE: COH 901 318 fix bytesleft DMAENGINE: COH 901 318 rename confusing vars