summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-02-06tipc: Fix node lock reclamation issues in broadcast link receptionAllan Stephens
Fixes a pair of problems in broadcast link message reception code relating to the reclamation of the node lock after consuming an in-sequence message. 1) Now retests to see if the sending node is still up after reclaiming the node lock, and bails out if it is non-operational. 2) Now manipulates the node's deferred message queue only after reclaiming the node lock, rather than using queue head pointer information that was cached previously. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06tipc: Add missing broadcast link lock when sending NACKAllan Stephens
Ensures that any attempt to send a NACK message over TIPC's broadcast link has exclusive access to the link's main data structures, to prevent interference with a simultaneous attempt to send other broadcast link traffic (such as application-generated multicast messages). Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06tipc: Fix problem with broadcast link synchronization between nodesAllan Stephens
Corrects a problem in which a link endpoint that activates as the result of receiving a RESET/STATE sequence of link protocol messages fails to properly record the broadcast link status information about the node to which it is now communicating with. (The problem does not occur with the more common RESET/ACTIVATE sequence of messages.) The fix ensures that the broadcast link status info is updated after the RESET message resets the link endpoint, rather than before, thereby preventing new information from being overwritten by the reset operation. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06tipc: Ensure broadcast link re-acquires node after link failureAllan Stephens
Fix a bug that can prevent TIPC from sending broadcast messages to a node if contact with the node is lost and then regained. The problem occurs if the broadcast link first clears the flag indicating the node is part of the link's distribution set (when it loses contact with the node), and later fails to restore the flag (when contact is regained); restoration fails if contact with the node is regained by implicit unicast link activation triggered by the arrival of a data message, rather than explicitly by the arrival of a link activation message. The broadcast link now uses separate fields to track whether a node is theoretically capable of receiving broadcast messages versus whether it is actually part of the link's distribution set. The former member is updated by the receipt of link protocol messages, which can occur at any time; the latter member is updated only when contact with the node is gained or lost. This change also permits the simplification of several conditional expressions since the broadcast link's "supported" field can now only be set if there are working links to the associated node. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06tipc: Prevent broadcast link stalling in dual LAN environmentsAllan Stephens
Ensure that sequence number information about incoming broadcast link messages is initialized only by the activation of the first link to a given cluster node. Previously, a race condition allowed reset and/or activation messages for a second link to re-initialize this sequence number information with obsolete values. This could trigger TIPC to request the retransmission of previously acknowledged broadcast link messages from that node, resulting in broadcast link processing becoming stalled if the node had already released one or more of those messages and was unable to perform the required retransmission. Thanks to Laser <gotolaser@gmail.com> for identifying this problem and assisting in the development of this fix. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06tipc: Prevent transmission of outdated link protocol messagesAllan Stephens
Ensures that a link endpoint discards any previously deferred link protocol message whenever it attempts to send a new one. Previously, it was possible for a link protocol message that was unsent due to congestion to be transmitted after newer protocol messages had been sent. The stale link protocol message might then cause the receiving link endpoint to malfunction because of its outdated conent. Thanks to Osamu Kaminuma [okaminum@avaya.com] for diagnosing the problem and contributing a prototype patch. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06tipc: improve the link deferred queue insertion algorithmAllan Stephens
Re-code the algorithm for inserting an out-of-sequence message into a unicast or broadcast link's deferred message queue. It remains functionally equivalent but should be easier to understand/maintain. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-06Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next
2012-02-06net: Make qdisc_skb_cb upper size bound explicit.David S. Miller
Just like skb->cb[], so that qdisc_skb_cb can be encapsulated inside of other data structures. This is intended to be used by IPoIB so that it can remember addressing information stored at hard_header_ops->create() time that it can fetch when the packet gets to the transmit routine. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-06Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/rtlwifi/rtl8192se/sw.c
2012-02-06netdev: ethernet dev_alloc_skb to netdev_alloc_skbPradeep A Dalvi
Replaced deprecating dev_alloc_skb with netdev_alloc_skb in drivers/net/ethernet - Removed extra skb->dev = dev after netdev_alloc_skb Signed-off-by: Pradeep A Dalvi <netdev@pradeepdalvi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-06netdev: ethernet dev_alloc_skb to netdev_alloc_skbPradeep A Dalvi
Replaced deprecating dev_alloc_skb with netdev_alloc_skb in drivers/net/ethernet - Removed extra skb->dev = dev after netdev_alloc_skb Signed-off-by: Pradeep A Dalvi <netdev@pradeepdalvi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-06netdev: ethernet dev_alloc_skb to netdev_alloc_skbPradeep A Dalvi
Replaced deprecating dev_alloc_skb with netdev_alloc_skb in drivers/net/ethernet - Removed extra skb->dev = dev after netdev_alloc_skb Signed-off-by: Pradeep A Dalvi <netdev@pradeepdalvi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-05cnic: Add FCoE parity error recoveryMichael Chan
When bnx2x returns error on FCoE SPQ messages, generate an error completion to bnx2fc immediately to speed up error recovery. This will eliminate length timeouts and spped up the reset of the device. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-05bnx2: Add missing memory barrier in bnx2_start_xmit()Vlad Zolotarov
Sync DMA descriptor before hitting the TX mailbox for weak memory model CPUs. There has been discussions several years ago about this. Some believe that writel() should guarantee ordering. Others want explicit barriers if necessary. Today writel() does not have the ordering guarantee and many other drivers use explicit barriers. Signed-off-by: Vlad Zolotarov <vlad@scalemp.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-05bnx2: Add support for ethtool --show-channels|--set-channelsMichael Chan
Allow the user to override the default number of RSS/TSS rings. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-05bonding: Fix misspelling of "since"Jesper Juhl
Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-05caif: caifdev is never used in net/caif/caif_dev.c::transmit() - remove it.Jesper Juhl
Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-05decnet: remove unused variable from dn_output()Jesper Juhl
The variable 'neigh' is assigned to, but otherwise completely unused. So let's remove it. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-05net/hyperv: Remove the unnecessary memset in rndis_filter_send()Haiyang Zhang
The memory has been allocated by kzalloc, so it's unnecessary to memset again. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-05net/hyperv: Correct the assignment in netvsc_recv_callback()Haiyang Zhang
The first assignment to variable "net" is wrong, but overridden by the latter assignments. So the bug isn't manifested. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-05net/hyperv: Convert camel cased variables in rndis_filter.c to lower casesHaiyang Zhang
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04Merge branch 'master' of git://gitorious.org/linux-can/linux-can-nextDavid S. Miller
Conflicts: drivers/net/can/usb/ems_usb.c Minor dev_warn --> netdev_warn conversion conflicts.
2012-02-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2012-02-04mlx4: Fix typo in cmd.cMasanari Iida
Correct spelling "reseting" to "resetting" in drivers/net/ethernet/mellanox/mlx4/cmd.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04netprio_cgroup: Fix obo in get_prioidxNeil Horman
It was recently pointed out to me that the get_prioidx function sets a bit in the prioidx map prior to checking to see if the index being set is out of bounds. This patch corrects that, avoiding the possiblity of us writing beyond the end of the array Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: Stanislaw Gruszka <sgruszka@redhat.com> CC: Stanislaw Gruszka <sgruszka@redhat.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04tms380tr: Fix cascading if/else tab abuseJoe Perches
Cascading "if/else if"'s are ugly. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-02-04be2net: Use new implementation of get mac list commandPadmanabh Ratnakar
VFs use get mac list command to get their mac address. The format of this command has changed. Update driver to use the new format. Signed-off-by: Mammatha Edhala <mammatha.edhala@emulex.com> Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04be2net: Fix link status query commandPadmanabh Ratnakar
Version number in query link status command is getting overwritten in be_wrb_cmd_hdr_prepare() routine. Move the initialization to fix this issue. Also initialize the domain field. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04caif-hsi: Add RX flip buffersjur.brandeland@stericsson.com
Implement RX flip buffer in the cfhsi_rx_done function, piggy-backed frames is also supported. This gives a significant performance gain for CAIF over HSI. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04caif: Add drop count for caif_net device.sjur.brandeland@stericsson.com
Count dropped packets in CAIF Netdevice. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04caif: Kill debugfs vars for caif socketsjur.brandeland@stericsson.com
Kill off the debug-fs exposed varaibles from caif_socket. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04enic: Update enic maintainersNeel Patel
Signed-off-by: Neel Patel <neepatel@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Nishank Trivedi <nistrive@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04enic: Check firmware capability before issuing firmware commandsNeel Patel
Check if firmware supports a particular command by first checking capability using devcmd CMD_CAPABILITY. Signed-off-by: Neel Patel <neepatel@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Nishank Trivedi <nistrive@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04enic: Enable support for multiple hardware receive queuesNeel Patel
This patch enables support for multiple receive queues. If multiple receive queues are used ingress traffic is hashed into one of the receive queues based on IP or TCP or both headers. The max number of supported receive queues per vnic is 8. Signed-off-by: Neel Patel <neepatel@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Nishank Trivedi <nistrive@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04qlge: Bumped driver version to 1.00.00.30.Jitendra Kalsaria
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04qlge: Fix memory leak in the process of refillJitendra Kalsaria
Driver was leaking memory when page allocation failures occurs. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04qlge: Removing needless print's which are notJitendra Kalsaria
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04qlge: Fixed invalid reference to ip headerJitendra Kalsaria
we have copied skb into addr(page), skb->data doesn't contain ip header information. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04qlge: Updating Schultz LICENSE.qlge file.Sritej Velaga
Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04qlcnic: Fix API unlockManish chopra
Log dump status. Remove unmatched qlcnic_api_unlock call. Update version to 5.0.26. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04qlcnic: Fix firmware abort code check.Sritej Velaga
Check bits 8-28 of peg_halt status register for firmware abort code. Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04qlcnic: report valid speed and duplex status when link is downSony Chacko
Report valid link statistics when link is down. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04qlcnic: Stop pause ctrl frames on fw hang.Sritej Velaga
When firmware hang is detected, fw should stop sending pause control frames. Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04netxen: report valid speed and duplex status when link is downSony Chacko
o Update version to 4.0.78 Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04netxen: Fix a panic during driver unload in device_remove_fileRajesh Borundia
o Pass adapter->pdev->dev instead of netdev->dev Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04netxen_nic: Error logging on firmware hangSritej Velaga
Log states of essential registers on firmware hang detection. Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04netxen_nic: Fix phy link statusSritej Velaga
Pass the adapter phy link status to the caller. Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04netxen_nic: fw dump supportManish chopra
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-26 09:06:09 +0000