summaryrefslogtreecommitdiff
path: root/net/sched/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'net/sched/Kconfig')
-rw-r--r--net/sched/Kconfig508
1 files changed, 508 insertions, 0 deletions
diff --git a/net/sched/Kconfig b/net/sched/Kconfig
new file mode 100644
index 00000000000..3d1d902dd1a
--- /dev/null
+++ b/net/sched/Kconfig
@@ -0,0 +1,508 @@
+#
+# Traffic control configuration.
+#
+choice
+ prompt "Packet scheduler clock source"
+ depends on NET_SCHED
+ default NET_SCH_CLK_JIFFIES
+ help
+ Packet schedulers need a monotonic clock that increments at a static
+ rate. The kernel provides several suitable interfaces, each with
+ different properties:
+
+ - high resolution (us or better)
+ - fast to read (minimal locking, no i/o access)
+ - synchronized on all processors
+ - handles cpu clock frequency changes
+
+ but nothing provides all of the above.
+
+config NET_SCH_CLK_JIFFIES
+ bool "Timer interrupt"
+ help
+ Say Y here if you want to use the timer interrupt (jiffies) as clock
+ source. This clock source is fast, synchronized on all processors and
+ handles cpu clock frequency changes, but its resolution is too low
+ for accurate shaping except at very low speed.
+
+config NET_SCH_CLK_GETTIMEOFDAY
+ bool "gettimeofday"
+ help
+ Say Y here if you want to use gettimeofday as clock source. This clock
+ source has high resolution, is synchronized on all processors and
+ handles cpu clock frequency changes, but it is slow.
+
+ Choose this if you need a high resolution clock source but can't use
+ the CPU's cycle counter.
+
+config NET_SCH_CLK_CPU
+ bool "CPU cycle counter"
+ depends on X86_TSC || X86_64 || ALPHA || SPARC64 || PPC64 || IA64
+ help
+ Say Y here if you want to use the CPU's cycle counter as clock source.
+ This is a cheap and high resolution clock source, but on some
+ architectures it is not synchronized on all processors and doesn't
+ handle cpu clock frequency changes.
+
+ The useable cycle counters are:
+
+ x86/x86_64 - Timestamp Counter
+ alpha - Cycle Counter
+ sparc64 - %ticks register
+ ppc64 - Time base
+ ia64 - Interval Time Counter
+
+ Choose this if your CPU's cycle counter is working properly.
+
+endchoice
+
+config NET_SCH_CBQ
+ tristate "CBQ packet scheduler"
+ depends on NET_SCHED
+ ---help---
+ Say Y here if you want to use the Class-Based Queueing (CBQ) packet
+ scheduling algorithm for some of your network devices. This
+ algorithm classifies the waiting packets into a tree-like hierarchy
+ of classes; the leaves of this tree are in turn scheduled by
+ separate algorithms (called "disciplines" in this context).
+
+ See the top of <file:net/sched/sch_cbq.c> for references about the
+ CBQ algorithm.
+
+ CBQ is a commonly used scheduler, so if you're unsure, you should
+ say Y here. Then say Y to all the queueing algorithms below that you
+ want to use as CBQ disciplines. Then say Y to "Packet classifier
+ API" and say Y to all the classifiers you want to use; a classifier
+ is a routine that allows you to sort your outgoing traffic into
+ classes based on a certain criterion.
+
+ To compile this code as a module, choose M here: the
+ module will be called sch_cbq.
+
+config NET_SCH_HTB
+ tristate "HTB packet scheduler"
+ depends on NET_SCHED
+ ---help---
+ Say Y here if you want to use the Hierarchical Token Buckets (HTB)
+ packet scheduling algorithm for some of your network devices. See
+ <http://luxik.cdi.cz/~devik/qos/htb/> for complete manual and
+ in-depth articles.
+
+ HTB is very similar to the CBQ regarding its goals however is has
+ different properties and different algorithm.
+
+ To compile this code as a module, choose M here: the
+ module will be called sch_htb.
+
+config NET_SCH_HFSC
+ tristate "HFSC packet scheduler"
+ depends on NET_SCHED
+ ---help---
+ Say Y here if you want to use the Hierarchical Fair Service Curve
+ (HFSC) packet scheduling algorithm for some of your network devices.
+
+ To compile this code as a module, choose M here: the
+ module will be called sch_hfsc.
+
+#tristate ' H-PFQ packet scheduler' CONFIG_NET_SCH_HPFQ
+config NET_SCH_ATM
+ tristate "ATM pseudo-scheduler"
+ depends on NET_SCHED && ATM
+ ---help---
+ Say Y here if you want to use the ATM pseudo-scheduler. This
+ provides a framework for invoking classifiers (aka "filters"), which
+ in turn select classes of this queuing discipline. Each class maps
+ the flow(s) it is handling to a given virtual circuit (see the top of
+ <file:net/sched/sch_atm.c>).
+
+ To compile this code as a module, choose M here: the
+ module will be called sch_atm.
+
+config NET_SCH_PRIO
+ tristate "The simplest PRIO pseudoscheduler"
+ depends on NET_SCHED
+ help
+ Say Y here if you want to use an n-band priority queue packet
+ "scheduler" for some of your network devices or as a leaf discipline
+ for the CBQ scheduling algorithm. If unsure, say Y.
+
+ To compile this code as a module, choose M here: the
+ module will be called sch_prio.
+
+config NET_SCH_RED
+ tristate "RED queue"
+ depends on NET_SCHED
+ help
+ Say Y here if you want to use the Random Early Detection (RED)
+ packet scheduling algorithm for some of your network devices (see
+ the top of <file:net/sched/sch_red.c> for details and references
+ about the algorithm).
+
+ To compile this code as a module, choose M here: the
+ module will be called sch_red.
+
+config NET_SCH_SFQ
+ tristate "SFQ queue"
+ depends on NET_SCHED
+ ---help---
+ Say Y here if you want to use the Stochastic Fairness Queueing (SFQ)
+ packet scheduling algorithm for some of your network devices or as a
+ leaf discipline for the CBQ scheduling algorithm (see the top of
+ <file:net/sched/sch_sfq.c> for details and references about the SFQ
+ algorithm).
+
+ To compile this code as a module, choose M here: the
+ module will be called sch_sfq.
+
+config NET_SCH_TEQL
+ tristate "TEQL queue"
+ depends on NET_SCHED
+ ---help---
+ Say Y here if you want to use the True Link Equalizer (TLE) packet
+ scheduling algorithm for some of your network devices or as a leaf
+ discipline for the CBQ scheduling algorithm. This queueing
+ discipline allows the combination of several physical devices into
+ one virtual device. (see the top of <file:net/sched/sch_teql.c> for
+ details).
+
+ To compile this code as a module, choose M here: the
+ module will be called sch_teql.
+
+config NET_SCH_TBF
+ tristate "TBF queue"
+ depends on NET_SCHED
+ help
+ Say Y here if you want to use the Simple Token Bucket Filter (TBF)
+ packet scheduling algorithm for some of your network devices or as a
+ leaf discipline for the CBQ scheduling algorithm (see the top of
+ <file:net/sched/sch_tbf.c> for a description of the TBF algorithm).
+
+ To compile this code as a module, choose M here: the
+ module will be called sch_tbf.
+
+config NET_SCH_GRED
+ tristate "GRED queue"
+ depends on NET_SCHED
+ help
+ Say Y here if you want to use the Generic Random Early Detection
+ (RED) packet scheduling algorithm for some of your network devices
+ (see the top of <file:net/sched/sch_red.c> for details and
+ references about the algorithm).
+
+ To compile this code as a module, choose M here: the
+ module will be called sch_gred.
+
+config NET_SCH_DSMARK
+ tristate "Diffserv field marker"
+ depends on NET_SCHED
+ help
+ Say Y if you want to schedule packets according to the
+ Differentiated Services architecture proposed in RFC 2475.
+ Technical information on this method, with pointers to associated
+ RFCs, is available at <http://www.gta.ufrj.br/diffserv/>.
+
+ To compile this code as a module, choose M here: the
+ module will be called sch_dsmark.
+
+config NET_SCH_NETEM
+ tristate "Network emulator"
+ depends on NET_SCHED
+ help
+ Say Y if you want to emulate network delay, loss, and packet
+ re-ordering. This is often useful to simulate networks when
+ testing applications or protocols.
+
+ To compile this driver as a module, choose M here: the module
+ will be called sch_netem.
+
+ If unsure, say N.
+
+config NET_SCH_INGRESS
+ tristate "Ingress Qdisc"
+ depends on NET_SCHED
+ help
+ If you say Y here, you will be able to police incoming bandwidth
+ and drop packets when this bandwidth exceeds your desired rate.
+ If unsure, say Y.
+
+ To compile this code as a module, choose M here: the
+ module will be called sch_ingress.
+
+config NET_QOS
+ bool "QoS support"
+ depends on NET_SCHED
+ ---help---
+ Say Y here if you want to include Quality Of Service scheduling
+ features, which means that you will be able to request certain
+ rate-of-flow limits for your network devices.
+
+ This Quality of Service (QoS) support will enable you to use
+ Differentiated Services (diffserv) and Resource Reservation Protocol
+ (RSVP) on your Linux router if you also say Y to "Packet classifier
+ API" and to some classifiers below. Documentation and software is at
+ <http://diffserv.sourceforge.net/>.
+
+ Note that the answer to this question won't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about QoS support.
+
+config NET_ESTIMATOR
+ bool "Rate estimator"
+ depends on NET_QOS
+ help
+ In order for Quality of Service scheduling to work, the current
+ rate-of-flow for a network device has to be estimated; if you say Y
+ here, the kernel will do just that.
+
+config NET_CLS
+ bool "Packet classifier API"
+ depends on NET_SCHED
+ ---help---
+ The CBQ scheduling algorithm requires that network packets which are
+ scheduled to be sent out over a network device be classified
+ according to some criterion. If you say Y here, you will get a
+ choice of several different packet classifiers with the following
+ questions.
+
+ This will enable you to use Differentiated Services (diffserv) and
+ Resource Reservation Protocol (RSVP) on your Linux router.
+ Documentation and software is at
+ <http://diffserv.sourceforge.net/>.
+
+config NET_CLS_BASIC
+ tristate "Basic classifier"
+ depends on NET_CLS
+ ---help---
+ Say Y here if you want to be able to classify packets using
+ only extended matches and actions.
+
+ To compile this code as a module, choose M here: the
+ module will be called cls_basic.
+
+config NET_CLS_TCINDEX
+ tristate "TC index classifier"
+ depends on NET_CLS
+ help
+ If you say Y here, you will be able to classify outgoing packets
+ according to the tc_index field of the skb. You will want this
+ feature if you want to implement Differentiated Services using
+ sch_dsmark. If unsure, say Y.
+
+ To compile this code as a module, choose M here: the
+ module will be called cls_tcindex.
+
+config NET_CLS_ROUTE4
+ tristate "Routing table based classifier"
+ depends on NET_CLS
+ select NET_CLS_ROUTE
+ help
+ If you say Y here, you will be able to classify outgoing packets
+ according to the route table entry they matched. If unsure, say Y.
+
+ To compile this code as a module, choose M here: the
+ module will be called cls_route.
+
+config NET_CLS_ROUTE
+ bool
+ default n
+
+config NET_CLS_FW
+ tristate "Firewall based classifier"
+ depends on NET_CLS
+ help
+ If you say Y here, you will be able to classify outgoing packets
+ according to firewall criteria you specified.
+
+ To compile this code as a module, choose M here: the
+ module will be called cls_fw.
+
+config NET_CLS_U32
+ tristate "U32 classifier"
+ depends on NET_CLS
+ help
+ If you say Y here, you will be able to classify outgoing packets
+ according to their destination address. If unsure, say Y.
+
+ To compile this code as a module, choose M here: the
+ module will be called cls_u32.
+
+config CLS_U32_PERF
+ bool "U32 classifier performance counters"
+ depends on NET_CLS_U32
+ help
+ gathers stats that could be used to tune u32 classifier performance.
+ Requires a new iproute2
+ You MUST NOT turn this on if you dont have an update iproute2.
+
+config NET_CLS_IND
+ bool "classify input device (slows things u32/fw) "
+ depends on NET_CLS_U32 || NET_CLS_FW
+ help
+ This option will be killed eventually when a
+ metadata action appears because it slows things a little
+ Available only for u32 and fw classifiers.
+ Requires a new iproute2
+ You MUST NOT turn this on if you dont have an update iproute2.
+
+config CLS_U32_MARK
+ bool "Use nfmark as a key in U32 classifier"
+ depends on NET_CLS_U32 && NETFILTER
+ help
+ This allows you to match mark in a u32 filter.
+ Example:
+ tc filter add dev eth0 protocol ip parent 1:0 prio 5 u32 \
+ match mark 0x0090 0xffff \
+ match ip dst 4.4.4.4 \
+ flowid 1:90
+ You must use a new iproute2 to use this feature.
+
+config NET_CLS_RSVP
+ tristate "Special RSVP classifier"
+ depends on NET_CLS && NET_QOS
+ ---help---
+ The Resource Reservation Protocol (RSVP) permits end systems to
+ request a minimum and maximum data flow rate for a connection; this
+ is important for real time data such as streaming sound or video.
+
+ Say Y here if you want to be able to classify outgoing packets based
+ on their RSVP requests.
+
+ To compile this code as a module, choose M here: the
+ module will be called cls_rsvp.
+
+config NET_CLS_RSVP6
+ tristate "Special RSVP classifier for IPv6"
+ depends on NET_CLS && NET_QOS
+ ---help---
+ The Resource Reservation Protocol (RSVP) permits end systems to
+ request a minimum and maximum data flow rate for a connection; this
+ is important for real time data such as streaming sound or video.
+
+ Say Y here if you want to be able to classify outgoing packets based
+ on their RSVP requests and you are using the new Internet Protocol
+ IPv6 as opposed to the older and more common IPv4.
+
+ To compile this code as a module, choose M here: the
+ module will be called cls_rsvp6.
+
+config NET_EMATCH
+ bool "Extended Matches"
+ depends on NET_CLS
+ ---help---
+ Say Y here if you want to use extended matches on top of classifiers
+ and select the extended matches below.
+
+ Extended matches are small classification helpers not worth writing
+ a separate classifier.
+
+ You must have a recent version of the iproute2 tools in order to use
+ extended matches.
+
+config NET_EMATCH_STACK
+ int "Stack size"
+ depends on NET_EMATCH
+ default "32"
+ ---help---
+ Size of the local stack variable used while evaluating the tree of
+ ematches. Limits the depth of the tree, i.e. the number of
+ encapsulated precedences. Every level requires 4 bytes of addtional
+ stack space.
+
+config NET_EMATCH_CMP
+ tristate "Simple packet data comparison"
+ depends on NET_EMATCH
+ ---help---
+ Say Y here if you want to be able to classify packets based on
+ simple packet data comparisons for 8, 16, and 32bit values.
+
+ To compile this code as a module, choose M here: the
+ module will be called em_cmp.
+
+config NET_EMATCH_NBYTE
+ tristate "Multi byte comparison"
+ depends on NET_EMATCH
+ ---help---
+ Say Y here if you want to be able to classify packets based on
+ multiple byte comparisons mainly useful for IPv6 address comparisons.
+
+ To compile this code as a module, choose M here: the
+ module will be called em_nbyte.
+
+config NET_EMATCH_U32
+ tristate "U32 hashing key"
+ depends on NET_EMATCH
+ ---help---
+ Say Y here if you want to be able to classify packets using
+ the famous u32 key in combination with logic relations.
+
+ To compile this code as a module, choose M here: the
+ module will be called em_u32.
+
+config NET_EMATCH_META
+ tristate "Metadata"
+ depends on NET_EMATCH
+ ---help---
+ Say Y here if you want to be ablt to classify packets based on
+ metadata such as load average, netfilter attributes, socket
+ attributes and routing decisions.
+
+ To compile this code as a module, choose M here: the
+ module will be called em_meta.
+
+config NET_CLS_ACT
+ bool "Packet ACTION"
+ depends on EXPERIMENTAL && NET_CLS && NET_QOS
+ ---help---
+ This option requires you have a new iproute2. It enables
+ tc extensions which can be used with tc classifiers.
+ You MUST NOT turn this on if you dont have an update iproute2.
+
+config NET_ACT_POLICE
+ tristate "Policing Actions"
+ depends on NET_CLS_ACT
+ ---help---
+ If you are using a newer iproute2 select this one, otherwise use one
+ below to select a policer.
+ You MUST NOT turn this on if you dont have an update iproute2.
+
+config NET_ACT_GACT
+ tristate "generic Actions"
+ depends on NET_CLS_ACT
+ ---help---
+ You must have new iproute2 to use this feature.
+ This adds simple filtering actions like drop, accept etc.
+
+config GACT_PROB
+ bool "generic Actions probability"
+ depends on NET_ACT_GACT
+ ---help---
+ Allows generic actions to be randomly or deterministically used.
+
+config NET_ACT_MIRRED
+ tristate "Packet In/Egress redirecton/mirror Actions"
+ depends on NET_CLS_ACT
+ ---help---
+ requires new iproute2
+ This allows packets to be mirrored or redirected to netdevices
+
+config NET_ACT_IPT
+ tristate "iptables Actions"
+ depends on NET_CLS_ACT && NETFILTER && IP_NF_IPTABLES
+ ---help---
+ requires new iproute2
+ This allows iptables targets to be used by tc filters
+
+config NET_ACT_PEDIT
+ tristate "Generic Packet Editor Actions"
+ depends on NET_CLS_ACT
+ ---help---
+ requires new iproute2
+ This allows for packets to be generically edited
+
+config NET_CLS_POLICE
+ bool "Traffic policing (needed for in/egress)"
+ depends on NET_CLS && NET_QOS && NET_CLS_ACT!=y
+ help
+ Say Y to support traffic policing (bandwidth limits). Needed for
+ ingress and egress rate limiting.
+