diff options
Diffstat (limited to 'drivers/usb/atm/speedtch.c')
| -rw-r--r-- | drivers/usb/atm/speedtch.c | 82 |
1 files changed, 66 insertions, 16 deletions
diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c index 0e981672f14..8c1c560cf05 100644 --- a/drivers/usb/atm/speedtch.c +++ b/drivers/usb/atm/speedtch.c @@ -35,6 +35,8 @@ #include <linux/slab.h> #include <linux/stat.h> #include <linux/timer.h> +#include <linux/types.h> +#include <linux/usb_ch9.h> #include <linux/workqueue.h> #include "usbatm.h" @@ -66,24 +68,33 @@ static const char speedtch_driver_name[] = "speedtch"; #define RESUBMIT_DELAY 1000 /* milliseconds */ -#define DEFAULT_ALTSETTING 1 +#define DEFAULT_BULK_ALTSETTING 1 +#define DEFAULT_ISOC_ALTSETTING 2 #define DEFAULT_DL_512_FIRST 0 +#define DEFAULT_ENABLE_ISOC 0 #define DEFAULT_SW_BUFFERING 0 -static int altsetting = DEFAULT_ALTSETTING; +static unsigned int altsetting = 0; /* zero means: use the default */ static int dl_512_first = DEFAULT_DL_512_FIRST; +static int enable_isoc = DEFAULT_ENABLE_ISOC; static int sw_buffering = DEFAULT_SW_BUFFERING; -module_param(altsetting, int, S_IRUGO | S_IWUSR); +module_param(altsetting, uint, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(altsetting, - "Alternative setting for data interface (default: " - __MODULE_STRING(DEFAULT_ALTSETTING) ")"); + "Alternative setting for data interface (bulk_default: " + __MODULE_STRING(DEFAULT_BULK_ALTSETTING) "; isoc_default: " + __MODULE_STRING(DEFAULT_ISOC_ALTSETTING) ")"); module_param(dl_512_first, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(dl_512_first, "Read 512 bytes before sending firmware (default: " __MODULE_STRING(DEFAULT_DL_512_FIRST) ")"); +module_param(enable_isoc, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(enable_isoc, + "Use isochronous transfers if available (default: " + __MODULE_STRING(DEFAULT_ENABLE_ISOC) ")"); + module_param(sw_buffering, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(sw_buffering, "Enable software buffering (default: " @@ -91,7 +102,8 @@ MODULE_PARM_DESC(sw_buffering, #define INTERFACE_DATA 1 #define ENDPOINT_INT 0x81 -#define ENDPOINT_DATA 0x07 +#define ENDPOINT_BULK_DATA 0x07 +#define ENDPOINT_ISOC_DATA 0x07 #define ENDPOINT_FIRMWARE 0x05 #define hex2int(c) ( (c >= '0') && (c <= '9') ? (c - '0') : ((c & 0xf) + 9) ) @@ -687,11 +699,12 @@ static int speedtch_bind(struct usbatm_data *usbatm, const struct usb_device_id *id) { struct usb_device *usb_dev = interface_to_usbdev(intf); - struct usb_interface *cur_intf; + struct usb_interface *cur_intf, *data_intf; struct speedtch_instance_data *instance; int ifnum = intf->altsetting->desc.bInterfaceNumber; int num_interfaces = usb_dev->actconfig->desc.bNumInterfaces; int i, ret; + int use_isoc; usb_dbg(usbatm, "%s entered\n", __func__); @@ -702,6 +715,11 @@ static int speedtch_bind(struct usbatm_data *usbatm, return -ENODEV; } + if (!(data_intf = usb_ifnum_to_if(usb_dev, INTERFACE_DATA))) { + usb_err(usbatm, "%s: data interface not found!\n", __func__); + return -ENODEV; + } + /* claim all interfaces */ for (i=0; i < num_interfaces; i++) { @@ -728,8 +746,9 @@ static int speedtch_bind(struct usbatm_data *usbatm, instance->usbatm = usbatm; - /* altsetting may change at any moment, so take a snapshot */ + /* altsetting and enable_isoc may change at any moment, so take a snapshot */ instance->altsetting = altsetting; + use_isoc = enable_isoc; if (instance->altsetting) if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, instance->altsetting)) < 0) { @@ -737,14 +756,44 @@ static int speedtch_bind(struct usbatm_data *usbatm, instance->altsetting = 0; /* fall back to default */ } - if (!instance->altsetting) { - if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, DEFAULT_ALTSETTING)) < 0) { - usb_err(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, DEFAULT_ALTSETTING, ret); - goto fail_free; + if (!instance->altsetting && use_isoc) + if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, DEFAULT_ISOC_ALTSETTING)) < 0) { + usb_dbg(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, DEFAULT_ISOC_ALTSETTING, ret); + use_isoc = 0; /* fall back to bulk */ } - instance->altsetting = DEFAULT_ALTSETTING; + + if (use_isoc) { + const struct usb_host_interface *desc = data_intf->cur_altsetting; + const __u8 target_address = USB_DIR_IN | usbatm->driver->isoc_in; + int i; + + use_isoc = 0; /* fall back to bulk if endpoint not found */ + + for (i=0; i<desc->desc.bNumEndpoints; i++) { + const struct usb_endpoint_descriptor *endpoint_desc = &desc->endpoint[i].desc; + + if ((endpoint_desc->bEndpointAddress == target_address)) { + use_isoc = (endpoint_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_ISOC; + break; + } + } + + if (!use_isoc) + usb_info(usbatm, "isochronous transfer not supported - using bulk\n"); } + if (!use_isoc && !instance->altsetting) + if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, DEFAULT_BULK_ALTSETTING)) < 0) { + usb_err(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, DEFAULT_BULK_ALTSETTING, ret); + goto fail_free; + } + + if (!instance->altsetting) + instance->altsetting = use_isoc ? DEFAULT_ISOC_ALTSETTING : DEFAULT_BULK_ALTSETTING; + + usbatm->flags |= (use_isoc ? UDSL_USE_ISOC : 0); + INIT_WORK(&instance->status_checker, (void *)speedtch_check_status, instance); instance->status_checker.timer.function = speedtch_status_poll; @@ -771,7 +820,7 @@ static int speedtch_bind(struct usbatm_data *usbatm, 0x12, 0xc0, 0x07, 0x00, instance->scratch_buffer + OFFSET_7, SIZE_7, 500); - usbatm->flags = (ret == SIZE_7 ? UDSL_SKIP_HEAVY_INIT : 0); + usbatm->flags |= (ret == SIZE_7 ? UDSL_SKIP_HEAVY_INIT : 0); usb_dbg(usbatm, "%s: firmware %s loaded\n", __func__, usbatm->flags & UDSL_SKIP_HEAVY_INIT ? "already" : "not"); @@ -817,8 +866,9 @@ static struct usbatm_driver speedtch_usbatm_driver = { .unbind = speedtch_unbind, .atm_start = speedtch_atm_start, .atm_stop = speedtch_atm_stop, - .in = ENDPOINT_DATA, - .out = ENDPOINT_DATA + .bulk_in = ENDPOINT_BULK_DATA, + .bulk_out = ENDPOINT_BULK_DATA, + .isoc_in = ENDPOINT_ISOC_DATA }; static int speedtch_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) |