diff options
Diffstat (limited to 'drivers/staging/brcm80211/include/sbchipc.h')
-rw-r--r-- | drivers/staging/brcm80211/include/sbchipc.h | 1588 |
1 files changed, 0 insertions, 1588 deletions
diff --git a/drivers/staging/brcm80211/include/sbchipc.h b/drivers/staging/brcm80211/include/sbchipc.h deleted file mode 100644 index 8c01c638ab8..00000000000 --- a/drivers/staging/brcm80211/include/sbchipc.h +++ /dev/null @@ -1,1588 +0,0 @@ -/* - * Copyright (c) 2010 Broadcom Corporation - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY - * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION - * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef _SBCHIPC_H -#define _SBCHIPC_H - -#ifndef _LANGUAGE_ASSEMBLY - -/* cpp contortions to concatenate w/arg prescan */ -#ifndef PAD -#define _PADLINE(line) pad ## line -#define _XSTR(line) _PADLINE(line) -#define PAD _XSTR(__LINE__) -#endif /* PAD */ - -typedef volatile struct { - u32 chipid; /* 0x0 */ - u32 capabilities; - u32 corecontrol; /* corerev >= 1 */ - u32 bist; - - /* OTP */ - u32 otpstatus; /* 0x10, corerev >= 10 */ - u32 otpcontrol; - u32 otpprog; - u32 otplayout; /* corerev >= 23 */ - - /* Interrupt control */ - u32 intstatus; /* 0x20 */ - u32 intmask; - - /* Chip specific regs */ - u32 chipcontrol; /* 0x28, rev >= 11 */ - u32 chipstatus; /* 0x2c, rev >= 11 */ - - /* Jtag Master */ - u32 jtagcmd; /* 0x30, rev >= 10 */ - u32 jtagir; - u32 jtagdr; - u32 jtagctrl; - - /* serial flash interface registers */ - u32 flashcontrol; /* 0x40 */ - u32 flashaddress; - u32 flashdata; - u32 PAD[1]; - - /* Silicon backplane configuration broadcast control */ - u32 broadcastaddress; /* 0x50 */ - u32 broadcastdata; - - /* gpio - cleared only by power-on-reset */ - u32 gpiopullup; /* 0x58, corerev >= 20 */ - u32 gpiopulldown; /* 0x5c, corerev >= 20 */ - u32 gpioin; /* 0x60 */ - u32 gpioout; /* 0x64 */ - u32 gpioouten; /* 0x68 */ - u32 gpiocontrol; /* 0x6C */ - u32 gpiointpolarity; /* 0x70 */ - u32 gpiointmask; /* 0x74 */ - - /* GPIO events corerev >= 11 */ - u32 gpioevent; - u32 gpioeventintmask; - - /* Watchdog timer */ - u32 watchdog; /* 0x80 */ - - /* GPIO events corerev >= 11 */ - u32 gpioeventintpolarity; - - /* GPIO based LED powersave registers corerev >= 16 */ - u32 gpiotimerval; /* 0x88 */ - u32 gpiotimeroutmask; - - /* clock control */ - u32 clockcontrol_n; /* 0x90 */ - u32 clockcontrol_sb; /* aka m0 */ - u32 clockcontrol_pci; /* aka m1 */ - u32 clockcontrol_m2; /* mii/uart/mipsref */ - u32 clockcontrol_m3; /* cpu */ - u32 clkdiv; /* corerev >= 3 */ - u32 gpiodebugsel; /* corerev >= 28 */ - u32 capabilities_ext; /* 0xac */ - - /* pll delay registers (corerev >= 4) */ - u32 pll_on_delay; /* 0xb0 */ - u32 fref_sel_delay; - u32 slow_clk_ctl; /* 5 < corerev < 10 */ - u32 PAD; - - /* Instaclock registers (corerev >= 10) */ - u32 system_clk_ctl; /* 0xc0 */ - u32 clkstatestretch; - u32 PAD[2]; - - /* Indirect backplane access (corerev >= 22) */ - u32 bp_addrlow; /* 0xd0 */ - u32 bp_addrhigh; - u32 bp_data; - u32 PAD; - u32 bp_indaccess; - u32 PAD[3]; - - /* More clock dividers (corerev >= 32) */ - u32 clkdiv2; - u32 PAD[2]; - - /* In AI chips, pointer to erom */ - u32 eromptr; /* 0xfc */ - - /* ExtBus control registers (corerev >= 3) */ - u32 pcmcia_config; /* 0x100 */ - u32 pcmcia_memwait; - u32 pcmcia_attrwait; - u32 pcmcia_iowait; - u32 ide_config; - u32 ide_memwait; - u32 ide_attrwait; - u32 ide_iowait; - u32 prog_config; - u32 prog_waitcount; - u32 flash_config; - u32 flash_waitcount; - u32 SECI_config; /* 0x130 SECI configuration */ - u32 PAD[3]; - - /* Enhanced Coexistence Interface (ECI) registers (corerev >= 21) */ - u32 eci_output; /* 0x140 */ - u32 eci_control; - u32 eci_inputlo; - u32 eci_inputmi; - u32 eci_inputhi; - u32 eci_inputintpolaritylo; - u32 eci_inputintpolaritymi; - u32 eci_inputintpolarityhi; - u32 eci_intmasklo; - u32 eci_intmaskmi; - u32 eci_intmaskhi; - u32 eci_eventlo; - u32 eci_eventmi; - u32 eci_eventhi; - u32 eci_eventmasklo; - u32 eci_eventmaskmi; - u32 eci_eventmaskhi; - u32 PAD[3]; - - /* SROM interface (corerev >= 32) */ - u32 sromcontrol; /* 0x190 */ - u32 sromaddress; - u32 sromdata; - u32 PAD[17]; - - /* Clock control and hardware workarounds (corerev >= 20) */ - u32 clk_ctl_st; /* 0x1e0 */ - u32 hw_war; - u32 PAD[70]; - - /* UARTs */ - u8 uart0data; /* 0x300 */ - u8 uart0imr; - u8 uart0fcr; - u8 uart0lcr; - u8 uart0mcr; - u8 uart0lsr; - u8 uart0msr; - u8 uart0scratch; - u8 PAD[248]; /* corerev >= 1 */ - - u8 uart1data; /* 0x400 */ - u8 uart1imr; - u8 uart1fcr; - u8 uart1lcr; - u8 uart1mcr; - u8 uart1lsr; - u8 uart1msr; - u8 uart1scratch; - u32 PAD[126]; - - /* PMU registers (corerev >= 20) */ - u32 pmucontrol; /* 0x600 */ - u32 pmucapabilities; - u32 pmustatus; - u32 res_state; - u32 res_pending; - u32 pmutimer; - u32 min_res_mask; - u32 max_res_mask; - u32 res_table_sel; - u32 res_dep_mask; - u32 res_updn_timer; - u32 res_timer; - u32 clkstretch; - u32 pmuwatchdog; - u32 gpiosel; /* 0x638, rev >= 1 */ - u32 gpioenable; /* 0x63c, rev >= 1 */ - u32 res_req_timer_sel; - u32 res_req_timer; - u32 res_req_mask; - u32 PAD; - u32 chipcontrol_addr; /* 0x650 */ - u32 chipcontrol_data; /* 0x654 */ - u32 regcontrol_addr; - u32 regcontrol_data; - u32 pllcontrol_addr; - u32 pllcontrol_data; - u32 pmustrapopt; /* 0x668, corerev >= 28 */ - u32 pmu_xtalfreq; /* 0x66C, pmurev >= 10 */ - u32 PAD[100]; - u16 sromotp[768]; -} chipcregs_t; - -#endif /* _LANGUAGE_ASSEMBLY */ - -#if defined(__BIG_ENDIAN) && defined(BCMHND74K) -/* Selective swapped defines for those registers we need in - * big-endian code. - */ -#define CC_CHIPID 4 -#define CC_CAPABILITIES 0 -#define CC_CHIPST 0x28 -#define CC_EROMPTR 0xf8 - -#else /* !__BIG_ENDIAN || !BCMHND74K */ - -#define CC_CHIPID 0 -#define CC_CAPABILITIES 4 -#define CC_CHIPST 0x2c -#define CC_EROMPTR 0xfc - -#endif /* __BIG_ENDIAN && BCMHND74K */ - -#define CC_OTPST 0x10 -#define CC_JTAGCMD 0x30 -#define CC_JTAGIR 0x34 -#define CC_JTAGDR 0x38 -#define CC_JTAGCTRL 0x3c -#define CC_GPIOPU 0x58 -#define CC_GPIOPD 0x5c -#define CC_GPIOIN 0x60 -#define CC_GPIOOUT 0x64 -#define CC_GPIOOUTEN 0x68 -#define CC_GPIOCTRL 0x6c -#define CC_GPIOPOL 0x70 -#define CC_GPIOINTM 0x74 -#define CC_WATCHDOG 0x80 -#define CC_CLKC_N 0x90 -#define CC_CLKC_M0 0x94 -#define CC_CLKC_M1 0x98 -#define CC_CLKC_M2 0x9c -#define CC_CLKC_M3 0xa0 -#define CC_CLKDIV 0xa4 -#define CC_SYS_CLK_CTL 0xc0 -#define CC_CLK_CTL_ST SI_CLK_CTL_ST -#define PMU_CTL 0x600 -#define PMU_CAP 0x604 -#define PMU_ST 0x608 -#define PMU_RES_STATE 0x60c -#define PMU_TIMER 0x614 -#define PMU_MIN_RES_MASK 0x618 -#define PMU_MAX_RES_MASK 0x61c -#define CC_CHIPCTL_ADDR 0x650 -#define CC_CHIPCTL_DATA 0x654 -#define PMU_REG_CONTROL_ADDR 0x658 -#define PMU_REG_CONTROL_DATA 0x65C -#define PMU_PLL_CONTROL_ADDR 0x660 -#define PMU_PLL_CONTROL_DATA 0x664 -#define CC_SROM_OTP 0x800 /* SROM/OTP address space */ - -/* chipid */ -#define CID_ID_MASK 0x0000ffff /* Chip Id mask */ -#define CID_REV_MASK 0x000f0000 /* Chip Revision mask */ -#define CID_REV_SHIFT 16 /* Chip Revision shift */ -#define CID_PKG_MASK 0x00f00000 /* Package Option mask */ -#define CID_PKG_SHIFT 20 /* Package Option shift */ -#define CID_CC_MASK 0x0f000000 /* CoreCount (corerev >= 4) */ -#define CID_CC_SHIFT 24 -#define CID_TYPE_MASK 0xf0000000 /* Chip Type */ -#define CID_TYPE_SHIFT 28 - -/* capabilities */ -#define CC_CAP_UARTS_MASK 0x00000003 /* Number of UARTs */ -#define CC_CAP_MIPSEB 0x00000004 /* MIPS is in big-endian mode */ -#define CC_CAP_UCLKSEL 0x00000018 /* UARTs clock select */ -#define CC_CAP_UINTCLK 0x00000008 /* UARTs are driven by internal divided clock */ -#define CC_CAP_UARTGPIO 0x00000020 /* UARTs own GPIOs 15:12 */ -#define CC_CAP_EXTBUS_MASK 0x000000c0 /* External bus mask */ -#define CC_CAP_EXTBUS_NONE 0x00000000 /* No ExtBus present */ -#define CC_CAP_EXTBUS_FULL 0x00000040 /* ExtBus: PCMCIA, IDE & Prog */ -#define CC_CAP_EXTBUS_PROG 0x00000080 /* ExtBus: ProgIf only */ -#define CC_CAP_FLASH_MASK 0x00000700 /* Type of flash */ -#define CC_CAP_PLL_MASK 0x00038000 /* Type of PLL */ -#define CC_CAP_PWR_CTL 0x00040000 /* Power control */ -#define CC_CAP_OTPSIZE 0x00380000 /* OTP Size (0 = none) */ -#define CC_CAP_OTPSIZE_SHIFT 19 /* OTP Size shift */ -#define CC_CAP_OTPSIZE_BASE 5 /* OTP Size base */ -#define CC_CAP_JTAGP 0x00400000 /* JTAG Master Present */ -#define CC_CAP_ROM 0x00800000 /* Internal boot rom active */ -#define CC_CAP_BKPLN64 0x08000000 /* 64-bit backplane */ -#define CC_CAP_PMU 0x10000000 /* PMU Present, rev >= 20 */ -#define CC_CAP_SROM 0x40000000 /* Srom Present, rev >= 32 */ -#define CC_CAP_NFLASH 0x80000000 /* Nand flash present, rev >= 35 */ - -#define CC_CAP2_SECI 0x00000001 /* SECI Present, rev >= 36 */ -#define CC_CAP2_GSIO 0x00000002 /* GSIO (spi/i2c) present, rev >= 37 */ - -/* PLL type */ -#define PLL_NONE 0x00000000 -#define PLL_TYPE1 0x00010000 /* 48MHz base, 3 dividers */ -#define PLL_TYPE2 0x00020000 /* 48MHz, 4 dividers */ -#define PLL_TYPE3 0x00030000 /* 25MHz, 2 dividers */ -#define PLL_TYPE4 0x00008000 /* 48MHz, 4 dividers */ -#define PLL_TYPE5 0x00018000 /* 25MHz, 4 dividers */ -#define PLL_TYPE6 0x00028000 /* 100/200 or 120/240 only */ -#define PLL_TYPE7 0x00038000 /* 25MHz, 4 dividers */ - -/* ILP clock */ -#define ILP_CLOCK 32000 - -/* ALP clock on pre-PMU chips */ -#define ALP_CLOCK 20000000 - -/* HT clock */ -#define HT_CLOCK 80000000 - -/* corecontrol */ -#define CC_UARTCLKO 0x00000001 /* Drive UART with internal clock */ -#define CC_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ -#define CC_UARTCLKEN 0x00000008 /* enable UART Clock (corerev > = 21 */ - -/* chipcontrol */ -#define CHIPCTRL_4321A0_DEFAULT 0x3a4 -#define CHIPCTRL_4321A1_DEFAULT 0x0a4 -#define CHIPCTRL_4321_PLL_DOWN 0x800000 /* serdes PLL down override */ - -/* Fields in the otpstatus register in rev >= 21 */ -#define OTPS_OL_MASK 0x000000ff -#define OTPS_OL_MFG 0x00000001 /* manuf row is locked */ -#define OTPS_OL_OR1 0x00000002 /* otp redundancy row 1 is locked */ -#define OTPS_OL_OR2 0x00000004 /* otp redundancy row 2 is locked */ -#define OTPS_OL_GU 0x00000008 /* general use region is locked */ -#define OTPS_GUP_MASK 0x00000f00 -#define OTPS_GUP_SHIFT 8 -#define OTPS_GUP_HW 0x00000100 /* h/w subregion is programmed */ -#define OTPS_GUP_SW 0x00000200 /* s/w subregion is programmed */ -#define OTPS_GUP_CI 0x00000400 /* chipid/pkgopt subregion is programmed */ -#define OTPS_GUP_FUSE 0x00000800 /* fuse subregion is programmed */ -#define OTPS_READY 0x00001000 -#define OTPS_RV(x) (1 << (16 + (x))) /* redundancy entry valid */ -#define OTPS_RV_MASK 0x0fff0000 - -/* Fields in the otpcontrol register in rev >= 21 */ -#define OTPC_PROGSEL 0x00000001 -#define OTPC_PCOUNT_MASK 0x0000000e -#define OTPC_PCOUNT_SHIFT 1 -#define OTPC_VSEL_MASK 0x000000f0 -#define OTPC_VSEL_SHIFT 4 -#define OTPC_TMM_MASK 0x00000700 -#define OTPC_TMM_SHIFT 8 -#define OTPC_ODM 0x00000800 -#define OTPC_PROGEN 0x80000000 - -/* Fields in otpprog in rev >= 21 and HND OTP */ -#define OTPP_COL_MASK 0x000000ff -#define OTPP_COL_SHIFT 0 -#define OTPP_ROW_MASK 0x0000ff00 -#define OTPP_ROW_SHIFT 8 -#define OTPP_OC_MASK 0x0f000000 -#define OTPP_OC_SHIFT 24 -#define OTPP_READERR 0x10000000 -#define OTPP_VALUE_MASK 0x20000000 -#define OTPP_VALUE_SHIFT 29 -#define OTPP_START_BUSY 0x80000000 -#define OTPP_READ 0x40000000 /* HND OTP */ - -/* otplayout reg corerev >= 36 */ -#define OTP_CISFORMAT_NEW 0x80000000 - -/* Opcodes for OTPP_OC field */ -#define OTPPOC_READ 0 -#define OTPPOC_BIT_PROG 1 -#define OTPPOC_VERIFY 3 -#define OTPPOC_INIT 4 -#define OTPPOC_SET 5 -#define OTPPOC_RESET 6 -#define OTPPOC_OCST 7 -#define OTPPOC_ROW_LOCK 8 -#define OTPPOC_PRESCN_TEST 9 - -/* Jtagm characteristics that appeared at a given corerev */ -#define JTAGM_CREV_OLD 10 /* Old command set, 16bit max IR */ -#define JTAGM_CREV_IRP 22 /* Able to do pause-ir */ -#define JTAGM_CREV_RTI 28 /* Able to do return-to-idle */ - -/* jtagcmd */ -#define JCMD_START 0x80000000 -#define JCMD_BUSY 0x80000000 -#define JCMD_STATE_MASK 0x60000000 -#define JCMD_STATE_TLR 0x00000000 /* Test-logic-reset */ -#define JCMD_STATE_PIR 0x20000000 /* Pause IR */ -#define JCMD_STATE_PDR 0x40000000 /* Pause DR */ -#define JCMD_STATE_RTI 0x60000000 /* Run-test-idle */ -#define JCMD0_ACC_MASK 0x0000f000 -#define JCMD0_ACC_IRDR 0x00000000 -#define JCMD0_ACC_DR 0x00001000 -#define JCMD0_ACC_IR 0x00002000 -#define JCMD0_ACC_RESET 0x00003000 -#define JCMD0_ACC_IRPDR 0x00004000 -#define JCMD0_ACC_PDR 0x00005000 -#define JCMD0_IRW_MASK 0x00000f00 -#define JCMD_ACC_MASK 0x000f0000 /* Changes for corerev 11 */ -#define JCMD_ACC_IRDR 0x00000000 -#define JCMD_ACC_DR 0x00010000 -#define JCMD_ACC_IR 0x00020000 -#define JCMD_ACC_RESET 0x00030000 -#define JCMD_ACC_IRPDR 0x00040000 -#define JCMD_ACC_PDR 0x00050000 -#define JCMD_ACC_PIR 0x00060000 -#define JCMD_ACC_IRDR_I 0x00070000 /* rev 28: return to run-test-idle */ -#define JCMD_ACC_DR_I 0x00080000 /* rev 28: return to run-test-idle */ -#define JCMD_IRW_MASK 0x00001f00 -#define JCMD_IRW_SHIFT 8 -#define JCMD_DRW_MASK 0x0000003f - -/* jtagctrl */ -#define JCTRL_FORCE_CLK 4 /* Force clock */ -#define JCTRL_EXT_EN 2 /* Enable external targets */ -#define JCTRL_EN 1 /* Enable Jtag master */ - -/* Fields in clkdiv */ -#define CLKD_SFLASH 0x0f000000 -#define CLKD_SFLASH_SHIFT 24 -#define CLKD_OTP 0x000f0000 -#define CLKD_OTP_SHIFT 16 -#define CLKD_JTAG 0x00000f00 -#define CLKD_JTAG_SHIFT 8 -#define CLKD_UART 0x000000ff - -#define CLKD2_SROM 0x00000003 - -/* intstatus/intmask */ -#define CI_GPIO 0x00000001 /* gpio intr */ -#define CI_EI 0x00000002 /* extif intr (corerev >= 3) */ -#define CI_TEMP 0x00000004 /* temp. ctrl intr (corerev >= 15) */ -#define CI_SIRQ 0x00000008 /* serial IRQ intr (corerev >= 15) */ -#define CI_PMU 0x00000020 /* pmu intr (corerev >= 21) */ -#define CI_UART 0x00000040 /* uart intr (corerev >= 21) */ -#define CI_WDRESET 0x80000000 /* watchdog reset occurred */ - -/* slow_clk_ctl */ -#define SCC_SS_MASK 0x00000007 /* slow clock source mask */ -#define SCC_SS_LPO 0x00000000 /* source of slow clock is LPO */ -#define SCC_SS_XTAL 0x00000001 /* source of slow clock is crystal */ -#define SCC_SS_PCI 0x00000002 /* source of slow clock is PCI */ -#define SCC_LF 0x00000200 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */ -#define SCC_LP 0x00000400 /* LPOPowerDown, 1: LPO is disabled, - * 0: LPO is enabled - */ -#define SCC_FS 0x00000800 /* ForceSlowClk, 1: sb/cores running on slow clock, - * 0: power logic control - */ -#define SCC_IP 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors - * PLL clock disable requests from core - */ -#define SCC_XC 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't - * disable crystal when appropriate - */ -#define SCC_XP 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */ -#define SCC_CD_MASK 0xffff0000 /* ClockDivider (SlowClk = 1/(4+divisor)) */ -#define SCC_CD_SHIFT 16 - -/* system_clk_ctl */ -#define SYCC_IE 0x00000001 /* ILPen: Enable Idle Low Power */ -#define SYCC_AE 0x00000002 /* ALPen: Enable Active Low Power */ -#define SYCC_FP 0x00000004 /* ForcePLLOn */ -#define SYCC_AR 0x00000008 /* Force ALP (or HT if ALPen is not set */ -#define SYCC_HR 0x00000010 /* Force HT */ -#define SYCC_CD_MASK 0xffff0000 /* ClkDiv (ILP = 1/(4 * (divisor + 1)) */ -#define SYCC_CD_SHIFT 16 - -/* Indirect backplane access */ -#define BPIA_BYTEEN 0x0000000f -#define BPIA_SZ1 0x00000001 -#define BPIA_SZ2 0x00000003 -#define BPIA_SZ4 0x00000007 -#define BPIA_SZ8 0x0000000f -#define BPIA_WRITE 0x00000100 -#define BPIA_START 0x00000200 -#define BPIA_BUSY 0x00000200 -#define BPIA_ERROR 0x00000400 - -/* pcmcia/prog/flash_config */ -#define CF_EN 0x00000001 /* enable */ -#define CF_EM_MASK 0x0000000e /* mode */ -#define CF_EM_SHIFT 1 -#define CF_EM_FLASH 0 /* flash/asynchronous mode */ -#define CF_EM_SYNC 2 /* synchronous mode */ -#define CF_EM_PCMCIA 4 /* pcmcia mode */ -#define CF_DS 0x00000010 /* destsize: 0=8bit, 1=16bit */ -#define CF_BS 0x00000020 /* byteswap */ -#define CF_CD_MASK 0x000000c0 /* clock divider */ -#define CF_CD_SHIFT 6 -#define CF_CD_DIV2 0x00000000 /* backplane/2 */ -#define CF_CD_DIV3 0x00000040 /* backplane/3 */ -#define CF_CD_DIV4 0x00000080 /* backplane/4 */ -#define CF_CE 0x00000100 /* clock enable */ -#define CF_SB 0x00000200 /* size/bytestrobe (synch only) */ - -/* pcmcia_memwait */ -#define PM_W0_MASK 0x0000003f /* waitcount0 */ -#define PM_W1_MASK 0x00001f00 /* waitcount1 */ -#define PM_W1_SHIFT 8 -#define PM_W2_MASK 0x001f0000 /* waitcount2 */ -#define PM_W2_SHIFT 16 -#define PM_W3_MASK 0x1f000000 /* waitcount3 */ -#define PM_W3_SHIFT 24 - -/* pcmcia_attrwait */ -#define PA_W0_MASK 0x0000003f /* waitcount0 */ -#define PA_W1_MASK 0x00001f00 /* waitcount1 */ -#define PA_W1_SHIFT 8 -#define PA_W2_MASK 0x001f0000 /* waitcount2 */ -#define PA_W2_SHIFT 16 -#define PA_W3_MASK 0x1f000000 /* waitcount3 */ -#define PA_W3_SHIFT 24 - -/* pcmcia_iowait */ -#define PI_W0_MASK 0x0000003f /* waitcount0 */ -#define PI_W1_MASK 0x00001f00 /* waitcount1 */ -#define PI_W1_SHIFT 8 -#define PI_W2_MASK 0x001f0000 /* waitcount2 */ -#define PI_W2_SHIFT 16 -#define PI_W3_MASK 0x1f000000 /* waitcount3 */ -#define PI_W3_SHIFT 24 - -/* prog_waitcount */ -#define PW_W0_MASK 0x0000001f /* waitcount0 */ -#define PW_W1_MASK 0x00001f00 /* waitcount1 */ -#define PW_W1_SHIFT 8 -#define PW_W2_MASK 0x001f0000 /* waitcount2 */ -#define PW_W2_SHIFT 16 -#define PW_W3_MASK 0x1f000000 /* waitcount3 */ -#define PW_W3_SHIFT 24 - -#define PW_W0 0x0000000c -#define PW_W1 0x00000a00 -#define PW_W2 0x00020000 -#define PW_W3 0x01000000 - -/* flash_waitcount */ -#define FW_W0_MASK 0x0000003f /* waitcount0 */ -#define FW_W1_MASK 0x00001f00 /* waitcount1 */ -#define FW_W1_SHIFT 8 -#define FW_W2_MASK 0x001f0000 /* waitcount2 */ -#define FW_W2_SHIFT 16 -#define FW_W3_MASK 0x1f000000 /* waitcount3 */ -#define FW_W3_SHIFT 24 - -/* When Srom support present, fields in sromcontrol */ -#define SRC_START 0x80000000 -#define SRC_BUSY 0x80000000 -#define SRC_OPCODE 0x60000000 -#define SRC_OP_READ 0x00000000 -#define SRC_OP_WRITE 0x20000000 -#define SRC_OP_WRDIS 0x40000000 -#define SRC_OP_WREN 0x60000000 -#define SRC_OTPSEL 0x00000010 -#define SRC_LOCK 0x00000008 -#define SRC_SIZE_MASK 0x00000006 -#define SRC_SIZE_1K 0x00000000 -#define SRC_SIZE_4K 0x00000002 -#define SRC_SIZE_16K 0x00000004 -#define SRC_SIZE_SHIFT 1 -#define SRC_PRESENT 0x00000001 - -/* Fields in pmucontrol */ -#define PCTL_ILP_DIV_MASK 0xffff0000 -#define PCTL_ILP_DIV_SHIFT 16 -#define PCTL_PLL_PLLCTL_UPD 0x00000400 /* rev 2 */ -#define PCTL_NOILP_ON_WAIT 0x00000200 /* rev 1 */ -#define PCTL_HT_REQ_EN 0x00000100 -#define PCTL_ALP_REQ_EN 0x00000080 -#define PCTL_XTALFREQ_MASK 0x0000007c -#define PCTL_XTALFREQ_SHIFT 2 -#define PCTL_ILP_DIV_EN 0x00000002 -#define PCTL_LPO_SEL 0x00000001 - -/* Fields in clkstretch */ -#define CSTRETCH_HT 0xffff0000 -#define CSTRETCH_ALP 0x0000ffff - -/* gpiotimerval */ -#define GPIO_ONTIME_SHIFT 16 - -/* clockcontrol_n */ -#define CN_N1_MASK 0x3f /* n1 control */ -#define CN_N2_MASK 0x3f00 /* n2 control */ -#define CN_N2_SHIFT 8 -#define CN_PLLC_MASK 0xf0000 /* pll control */ -#define CN_PLLC_SHIFT 16 - -/* clockcontrol_sb/pci/uart */ -#define CC_M1_MASK 0x3f /* m1 control */ -#define CC_M2_MASK 0x3f00 /* m2 control */ -#define CC_M2_SHIFT 8 -#define CC_M3_MASK 0x3f0000 /* m3 control */ -#define CC_M3_SHIFT 16 -#define CC_MC_MASK 0x1f000000 /* mux control */ -#define CC_MC_SHIFT 24 - -/* N3M Clock control magic field values */ -#define CC_F6_2 0x02 /* A factor of 2 in */ -#define CC_F6_3 0x03 /* 6-bit fields like */ -#define CC_F6_4 0x05 /* N1, M1 or M3 */ -#define CC_F6_5 0x09 -#define CC_F6_6 0x11 -#define CC_F6_7 0x21 - -#define CC_F5_BIAS 5 /* 5-bit fields get this added */ - -#define CC_MC_BYPASS 0x08 -#define CC_MC_M1 0x04 -#define CC_MC_M1M2 0x02 -#define CC_MC_M1M2M3 0x01 -#define CC_MC_M1M3 0x11 - -/* Type 2 Clock control magic field values */ -#define CC_T2_BIAS 2 /* n1, n2, m1 & m3 bias */ -#define CC_T2M2_BIAS 3 /* m2 bias */ - -#define CC_T2MC_M1BYP 1 -#define CC_T2MC_M2BYP 2 -#define CC_T2MC_M3BYP 4 - -/* Type 6 Clock control magic field values */ -#define CC_T6_MMASK 1 /* bits of interest in m */ -#define CC_T6_M0 120000000 /* sb clock for m = 0 */ -#define CC_T6_M1 100000000 /* sb clock for m = 1 */ -#define SB2MIPS_T6(sb) (2 * (sb)) - -/* Common clock base */ -#define CC_CLOCK_BASE1 24000000 /* Half the clock freq */ -#define CC_CLOCK_BASE2 12500000 /* Alternate crystal on some PLLs */ - -/* Clock control values for 200MHz in 5350 */ -#define CLKC_5350_N 0x0311 -#define CLKC_5350_M 0x04020009 - -/* Flash types in the chipcommon capabilities register */ -#define FLASH_NONE 0x000 /* No flash */ -#define SFLASH_ST 0x100 /* ST serial flash */ -#define SFLASH_AT 0x200 /* Atmel serial flash */ -#define PFLASH 0x700 /* Parallel flash */ - -/* Bits in the ExtBus config registers */ -#define CC_CFG_EN 0x0001 /* Enable */ -#define CC_CFG_EM_MASK 0x000e /* Extif Mode */ -#define CC_CFG_EM_ASYNC 0x0000 /* Async/Parallel flash */ -#define CC_CFG_EM_SYNC 0x0002 /* Synchronous */ -#define CC_CFG_EM_PCMCIA 0x0004 /* PCMCIA */ -#define CC_CFG_EM_IDE 0x0006 /* IDE */ -#define CC_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ -#define CC_CFG_CD_MASK 0x00e0 /* Sync: Clock divisor, rev >= 20 */ -#define CC_CFG_CE 0x0100 /* Sync: Clock enable, rev >= 20 */ -#define CC_CFG_SB 0x0200 /* Sync: Size/Bytestrobe, rev >= 20 */ -#define CC_CFG_IS 0x0400 /* Extif Sync Clk Select, rev >= 20 */ - -/* ExtBus address space */ -#define CC_EB_BASE 0x1a000000 /* Chipc ExtBus base address */ -#define CC_EB_PCMCIA_MEM 0x1a000000 /* PCMCIA 0 memory base address */ -#define CC_EB_PCMCIA_IO 0x1a200000 /* PCMCIA 0 I/O base address */ -#define CC_EB_PCMCIA_CFG 0x1a400000 /* PCMCIA 0 config base address */ -#define CC_EB_IDE 0x1a800000 /* IDE memory base */ -#define CC_EB_PCMCIA1_MEM 0x1a800000 /* PCMCIA 1 memory base address */ -#define CC_EB_PCMCIA1_IO 0x1aa00000 /* PCMCIA 1 I/O base address */ -#define CC_EB_PCMCIA1_CFG 0x1ac00000 /* PCMCIA 1 config base address */ -#define CC_EB_PROGIF 0x1b000000 /* ProgIF Async/Sync base address */ - -/* Start/busy bit in flashcontrol */ -#define SFLASH_OPCODE 0x000000ff -#define SFLASH_ACTION 0x00000700 -#define SFLASH_CS_ACTIVE 0x00001000 /* Chip Select Active, rev >= 20 */ -#define SFLASH_START 0x80000000 -#define SFLASH_BUSY SFLASH_START - -/* flashcontrol action codes */ -#define SFLASH_ACT_OPONLY 0x0000 /* Issue opcode only */ -#define SFLASH_ACT_OP1D 0x0100 /* opcode + 1 data byte */ -#define SFLASH_ACT_OP3A 0x0200 /* opcode + 3 addr bytes */ -#define SFLASH_ACT_OP3A1D 0x0300 /* opcode + 3 addr & 1 data bytes */ -#define SFLASH_ACT_OP3A4D 0x0400 /* opcode + 3 addr & 4 data bytes */ -#define SFLASH_ACT_OP3A4X4D 0x0500 /* opcode + 3 addr, 4 don't care & 4 data bytes */ -#define SFLASH_ACT_OP3A1X4D 0x0700 /* opcode + 3 addr, 1 don't care & 4 data bytes */ - -/* flashcontrol action+opcodes for ST flashes */ -#define SFLASH_ST_WREN 0x0006 /* Write Enable */ -#define SFLASH_ST_WRDIS 0x0004 /* Write Disable */ -#define SFLASH_ST_RDSR 0x0105 /* Read Status Register */ -#define SFLASH_ST_WRSR 0x0101 /* Write Status Register */ -#define SFLASH_ST_READ 0x0303 /* Read Data Bytes */ -#define SFLASH_ST_PP 0x0302 /* Page Program */ -#define SFLASH_ST_SE 0x02d8 /* Sector Erase */ -#define SFLASH_ST_BE 0x00c7 /* Bulk Erase */ -#define SFLASH_ST_DP 0x00b9 /* Deep Power-down */ -#define SFLASH_ST_RES 0x03ab /* Read Electronic Signature */ -#define SFLASH_ST_CSA 0x1000 /* Keep chip select asserted */ -#define SFLASH_ST_SSE 0x0220 /* Sub-sector Erase */ - -/* Status register bits for ST flashes */ -#define SFLASH_ST_WIP 0x01 /* Write In Progress */ -#define SFLASH_ST_WEL 0x02 /* Write Enable Latch */ -#define SFLASH_ST_BP_MASK 0x1c /* Block Protect */ -#define SFLASH_ST_BP_SHIFT 2 -#define SFLASH_ST_SRWD 0x80 /* Status Register Write Disable */ - -/* flashcontrol action+opcodes for Atmel flashes */ -#define SFLASH_AT_READ 0x07e8 -#define SFLASH_AT_PAGE_READ 0x07d2 -#define SFLASH_AT_BUF1_READ -#define SFLASH_AT_BUF2_READ -#define SFLASH_AT_STATUS 0x01d7 -#define SFLASH_AT_BUF1_WRITE 0x0384 -#define SFLASH_AT_BUF2_WRITE 0x0387 -#define SFLASH_AT_BUF1_ERASE_PROGRAM 0x0283 -#define SFLASH_AT_BUF2_ERASE_PROGRAM 0x0286 -#define SFLASH_AT_BUF1_PROGRAM 0x0288 -#define SFLASH_AT_BUF2_PROGRAM 0x0289 -#define SFLASH_AT_PAGE_ERASE 0x0281 -#define SFLASH_AT_BLOCK_ERASE 0x0250 -#define SFLASH_AT_BUF1_WRITE_ERASE_PROGRAM 0x0382 -#define SFLASH_AT_BUF2_WRITE_ERASE_PROGRAM 0x0385 -#define SFLASH_AT_BUF1_LOAD 0x0253 -#define SFLASH_AT_BUF2_LOAD 0x0255 -#define SFLASH_AT_BUF1_COMPARE 0x0260 -#define SFLASH_AT_BUF2_COMPARE 0x0261 -#define SFLASH_AT_BUF1_REPROGRAM 0x0258 -#define SFLASH_AT_BUF2_REPROGRAM 0x0259 - -/* Status register bits for Atmel flashes */ -#define SFLASH_AT_READY 0x80 -#define SFLASH_AT_MISMATCH 0x40 -#define SFLASH_AT_ID_MASK 0x38 -#define SFLASH_AT_ID_SHIFT 3 - -/* - * These are the UART port assignments, expressed as offsets from the base - * register. These assignments should hold for any serial port based on - * a 8250, 16450, or 16550(A). - */ - -#define UART_RX 0 /* In: Receive buffer (DLAB=0) */ -#define UART_TX 0 /* Out: Transmit buffer (DLAB=0) */ -#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */ -#define UART_IER 1 /* In/Out: Interrupt Enable Register (DLAB=0) */ -#define UART_DLM 1 /* Out: Divisor Latch High (DLAB=1) */ -#define UART_IIR 2 /* In: Interrupt Identity Register */ -#define UART_FCR 2 /* Out: FIFO Control Register */ -#define UART_LCR 3 /* Out: Line Control Register */ -#define UART_MCR 4 /* Out: Modem Control Register */ -#define UART_LSR 5 /* In: Line Status Register */ -#define UART_MSR 6 /* In: Modem Status Register */ -#define UART_SCR 7 /* I/O: Scratch Register */ -#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ -#define UART_LCR_WLEN8 0x03 /* Word length: 8 bits */ -#define UART_MCR_OUT2 0x08 /* MCR GPIO out 2 */ -#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ -#define UART_LSR_RX_FIFO 0x80 /* Receive FIFO error */ -#define UART_LSR_TDHR 0x40 /* Data-hold-register empty */ -#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ -#define UART_LSR_BREAK 0x10 /* Break interrupt */ -#define UART_LSR_FRAMING 0x08 /* Framing error */ -#define UART_LSR_PARITY 0x04 /* Parity error */ -#define UART_LSR_OVERRUN 0x02 /* Overrun error */ -#define UART_LSR_RXRDY 0x01 /* Receiver ready */ -#define UART_FCR_FIFO_ENABLE 1 /* FIFO control register bit controlling FIFO enable/disable */ - -/* Interrupt Identity Register (IIR) bits */ -#define UART_IIR_FIFO_MASK 0xc0 /* IIR FIFO disable/enabled mask */ -#define UART_IIR_INT_MASK 0xf /* IIR interrupt ID source */ -#define UART_IIR_MDM_CHG 0x0 /* Modem status changed */ -#define UART_IIR_NOINT 0x1 /* No interrupt pending */ -#define UART_IIR_THRE 0x2 /* THR empty */ -#define UART_IIR_RCVD_DATA 0x4 /* Received data available */ -#define UART_IIR_RCVR_STATUS 0x6 /* Receiver status */ -#define UART_IIR_CHAR_TIME 0xc /* Character time */ - -/* Interrupt Enable Register (IER) bits */ -#define UART_IER_EDSSI 8 /* enable modem status interrupt */ -#define UART_IER_ELSI 4 /* enable receiver line status interrupt */ -#define UART_IER_ETBEI 2 /* enable transmitter holding register empty interrupt */ -#define UART_IER_ERBFI 1 /* enable data available interrupt */ - -/* pmustatus */ -#define PST_EXTLPOAVAIL 0x0100 -#define PST_WDRESET 0x0080 -#define PST_INTPEND 0x0040 -#define PST_SBCLKST 0x0030 -#define PST_SBCLKST_ILP 0x0010 -#define PST_SBCLKST_ALP 0x0020 -#define PST_SBCLKST_HT 0x0030 -#define PST_ALPAVAIL 0x0008 -#define PST_HTAVAIL 0x0004 -#define PST_RESINIT 0x0003 - -/* pmucapabilities */ -#define PCAP_REV_MASK 0x000000ff -#define PCAP_RC_MASK 0x00001f00 -#define PCAP_RC_SHIFT 8 -#define PCAP_TC_MASK 0x0001e000 -#define PCAP_TC_SHIFT 13 -#define PCAP_PC_MASK 0x001e0000 -#define PCAP_PC_SHIFT 17 -#define PCAP_VC_MASK 0x01e00000 -#define PCAP_VC_SHIFT 21 -#define PCAP_CC_MASK 0x1e000000 -#define PCAP_CC_SHIFT 25 -#define PCAP5_PC_MASK 0x003e0000 /* PMU corerev >= 5 */ -#define PCAP5_PC_SHIFT 17 -#define PCAP5_VC_MASK 0x07c00000 -#define PCAP5_VC_SHIFT 22 -#define PCAP5_CC_MASK 0xf8000000 -#define PCAP5_CC_SHIFT 27 - -/* PMU Resource Request Timer registers */ -/* This is based on PmuRev0 */ -#define PRRT_TIME_MASK 0x03ff -#define PRRT_INTEN 0x0400 -#define PRRT_REQ_ACTIVE 0x0800 -#define PRRT_ALP_REQ 0x1000 -#define PRRT_HT_REQ 0x2000 - -/* PMU resource bit position */ -#define PMURES_BIT(bit) (1 << (bit)) - -/* PMU resource number limit */ -#define PMURES_MAX_RESNUM 30 - -/* PMU chip control0 register */ -#define PMU_CHIPCTL0 0 - -/* PMU chip control1 register */ -#define PMU_CHIPCTL1 1 -#define PMU_CC1_RXC_DLL_BYPASS 0x00010000 - -#define PMU_CC1_IF_TYPE_MASK 0x00000030 -#define PMU_CC1_IF_TYPE_RMII 0x00000000 -#define PMU_CC1_IF_TYPE_MII 0x00000010 -#define PMU_CC1_IF_TYPE_RGMII 0x00000020 - -#define PMU_CC1_SW_TYPE_MASK 0x000000c0 -#define PMU_CC1_SW_TYPE_EPHY 0x00000000 -#define PMU_CC1_SW_TYPE_EPHYMII 0x00000040 -#define PMU_CC1_SW_TYPE_EPHYRMII 0x00000080 -#define PMU_CC1_SW_TYPE_RGMII 0x000000c0 - -/* PMU corerev and chip specific PLL controls. - * PMU<rev>_PLL<num>_XX where <rev> is PMU corerev and <num> is an arbitrary number - * to differentiate different PLLs controlled by the same PMU rev. - */ -/* pllcontrol registers */ -/* PDIV, div_phy, div_arm, div_adc, dith_sel, ioff, kpd_scale, lsb_sel, mash_sel, lf_c & lf_r */ -#define PMU0_PLL0_PLLCTL0 0 -#define PMU0_PLL0_PC0_PDIV_MASK 1 -#define PMU0_PLL0_PC0_PDIV_FREQ 25000 -#define PMU0_PLL0_PC0_DIV_ARM_MASK 0x00000038 -#define PMU0_PLL0_PC0_DIV_ARM_SHIFT 3 -#define PMU0_PLL0_PC0_DIV_ARM_BASE 8 - -/* PC0_DIV_ARM for PLLOUT_ARM */ -#define PMU0_PLL0_PC0_DIV_ARM_110MHZ 0 -#define PMU0_PLL0_PC0_DIV_ARM_97_7MHZ 1 -#define PMU0_PLL0_PC0_DIV_ARM_88MHZ 2 -#define PMU0_PLL0_PC0_DIV_ARM_80MHZ 3 /* Default */ -#define PMU0_PLL0_PC0_DIV_ARM_73_3MHZ 4 -#define PMU0_PLL0_PC0_DIV_ARM_67_7MHZ 5 -#define PMU0_PLL0_PC0_DIV_ARM_62_9MHZ 6 -#define PMU0_PLL0_PC0_DIV_ARM_58_6MHZ 7 - -/* Wildcard base, stop_mod, en_lf_tp, en_cal & lf_r2 */ -#define PMU0_PLL0_PLLCTL1 1 -#define PMU0_PLL0_PC1_WILD_INT_MASK 0xf0000000 -#define PMU0_PLL0_PC1_WILD_INT_SHIFT 28 -#define PMU0_PLL0_PC1_WILD_FRAC_MASK 0x0fffff00 -#define PMU0_PLL0_PC1_WILD_FRAC_SHIFT 8 -#define PMU0_PLL0_PC1_STOP_MOD 0x00000040 - -/* Wildcard base, vco_calvar, vco_swc, vco_var_selref, vso_ical & vco_sel_avdd */ -#define PMU0_PLL0_PLLCTL2 2 -#define PMU0_PLL0_PC2_WILD_INT_MASK 0xf -#define PMU0_PLL0_PC2_WILD_INT_SHIFT 4 - -/* pllcontrol registers */ -/* ndiv_pwrdn, pwrdn_ch<x>, refcomp_pwrdn, dly_ch<x>, p1div, p2div, _bypass_sdmod */ -#define PMU1_PLL0_PLLCTL0 0 -#define PMU1_PLL0_PC0_P1DIV_MASK 0x00f00000 -#define PMU1_PLL0_PC0_P1DIV_SHIFT 20 -#define PMU1_PLL0_PC0_P2DIV_MASK 0x0f000000 -#define PMU1_PLL0_PC0_P2DIV_SHIFT 24 - -/* m<x>div */ -#define PMU1_PLL0_PLLCTL1 1 -#define PMU1_PLL0_PC1_M1DIV_MASK 0x000000ff -#define PMU1_PLL0_PC1_M1DIV_SHIFT 0 -#define PMU1_PLL0_PC1_M2DIV_MASK 0x0000ff00 -#define PMU1_PLL0_PC1_M2DIV_SHIFT 8 -#define PMU1_PLL0_PC1_M3DIV_MASK 0x00ff0000 -#define PMU1_PLL0_PC1_M3DIV_SHIFT 16 -#define PMU1_PLL0_PC1_M4DIV_MASK 0xff000000 -#define PMU1_PLL0_PC1_M4DIV_SHIFT 24 - -#define DOT11MAC_880MHZ_CLK_DIVISOR_SHIFT 8 -#define DOT11MAC_880MHZ_CLK_DIVISOR_MASK (0xFF << DOT11MAC_880MHZ_CLK_DIVISOR_SHIFT) -#define DOT11MAC_880MHZ_CLK_DIVISOR_VAL (0xE << DOT11MAC_880MHZ_CLK_DIVISOR_SHIFT) - -/* m<x>div, ndiv_dither_mfb, ndiv_mode, ndiv_int */ -#define PMU1_PLL0_PLLCTL2 2 -#define PMU1_PLL0_PC2_M5DIV_MASK 0x000000ff -#define PMU1_PLL0_PC2_M5DIV_SHIFT 0 -#define PMU1_PLL0_PC2_M6DIV_MASK 0x0000ff00 -#define PMU1_PLL0_PC2_M6DIV_SHIFT 8 -#define PMU1_PLL0_PC2_NDIV_MODE_MASK 0x000e0000 -#define PMU1_PLL0_PC2_NDIV_MODE_SHIFT 17 -#define PMU1_PLL0_PC2_NDIV_MODE_MASH 1 -#define PMU1_PLL0_PC2_NDIV_MODE_MFB 2 /* recommended for 4319 */ -#define PMU1_PLL0_PC2_NDIV_INT_MASK 0x1ff00000 -#define PMU1_PLL0_PC2_NDIV_INT_SHIFT 20 - -/* ndiv_frac */ -#define PMU1_PLL0_PLLCTL3 3 -#define PMU1_PLL0_PC3_NDIV_FRAC_MASK 0x00ffffff -#define PMU1_PLL0_PC3_NDIV_FRAC_SHIFT 0 - -/* pll_ctrl */ -#define PMU1_PLL0_PLLCTL4 4 - -/* pll_ctrl, vco_rng, clkdrive_ch<x> */ -#define PMU1_PLL0_PLLCTL5 5 -#define PMU1_PLL0_PC5_CLK_DRV_MASK 0xffffff00 -#define PMU1_PLL0_PC5_CLK_DRV_SHIFT 8 - -/* PMU rev 2 control words */ -#define PMU2_PHY_PLL_PLLCTL 4 -#define PMU2_SI_PLL_PLLCTL 10 - -/* PMU rev 2 */ -/* pllcontrol registers */ -/* ndiv_pwrdn, pwrdn_ch<x>, refcomp_pwrdn, dly_ch<x>, p1div, p2div, _bypass_sdmod */ -#define PMU2_PLL_PLLCTL0 0 -#define PMU2_PLL_PC0_P1DIV_MASK 0x00f00000 -#define PMU2_PLL_PC0_P1DIV_SHIFT 20 -#define PMU2_PLL_PC0_P2DIV_MASK 0x0f000000 -#define PMU2_PLL_PC0_P2DIV_SHIFT 24 - -/* m<x>div */ -#define PMU2_PLL_PLLCTL1 1 -#define PMU2_PLL_PC1_M1DIV_MASK 0x000000ff -#define PMU2_PLL_PC1_M1DIV_SHIFT 0 -#define PMU2_PLL_PC1_M2DIV_MASK 0x0000ff00 -#define PMU2_PLL_PC1_M2DIV_SHIFT 8 -#define PMU2_PLL_PC1_M3DIV_MASK 0x00ff0000 -#define PMU2_PLL_PC1_M3DIV_SHIFT 16 -#define PMU2_PLL_PC1_M4DIV_MASK 0xff000000 -#define PMU2_PLL_PC1_M4DIV_SHIFT 24 - -/* m<x>div, ndiv_dither_mfb, ndiv_mode, ndiv_int */ -#define PMU2_PLL_PLLCTL2 2 -#define PMU2_PLL_PC2_M5DIV_MASK 0x000000ff -#define PMU2_PLL_PC2_M5DIV_SHIFT 0 -#define PMU2_PLL_PC2_M6DIV_MASK 0x0000ff00 -#define PMU2_PLL_PC2_M6DIV_SHIFT 8 -#define PMU2_PLL_PC2_NDIV_MODE_MASK 0x000e0000 -#define PMU2_PLL_PC2_NDIV_MODE_SHIFT 17 -#define PMU2_PLL_PC2_NDIV_INT_MASK 0x1ff00000 -#define PMU2_PLL_PC2_NDIV_INT_SHIFT 20 - -/* ndiv_frac */ -#define PMU2_PLL_PLLCTL3 3 -#define PMU2_PLL_PC3_NDIV_FRAC_MASK 0x00ffffff -#define PMU2_PLL_PC3_NDIV_FRAC_SHIFT 0 - -/* pll_ctrl */ -#define PMU2_PLL_PLLCTL4 4 - -/* pll_ctrl, vco_rng, clkdrive_ch<x> */ -#define PMU2_PLL_PLLCTL5 5 -#define PMU2_PLL_PC5_CLKDRIVE_CH1_MASK 0x00000f00 -#define PMU2_PLL_PC5_CLKDRIVE_CH1_SHIFT 8 -#define PMU2_PLL_PC5_CLKDRIVE_CH2_MASK 0x0000f000 -#define PMU2_PLL_PC5_CLKDRIVE_CH2_SHIFT 12 -#define PMU2_PLL_PC5_CLKDRIVE_CH3_MASK 0x000f0000 -#define PMU2_PLL_PC5_CLKDRIVE_CH3_SHIFT 16 -#define PMU2_PLL_PC5_CLKDRIVE_CH4_MASK 0x00f00000 -#define PMU2_PLL_PC5_CLKDRIVE_CH4_SHIFT 20 -#define PMU2_PLL_PC5_CLKDRIVE_CH5_MASK 0x0f000000 -#define PMU2_PLL_PC5_CLKDRIVE_CH5_SHIFT 24 -#define PMU2_PLL_PC5_CLKDRIVE_CH6_MASK 0xf0000000 -#define PMU2_PLL_PC5_CLKDRIVE_CH6_SHIFT 28 - -/* PMU rev 5 (& 6) */ -#define PMU5_PLL_P1P2_OFF 0 -#define PMU5_PLL_P1_MASK 0x0f000000 -#define PMU5_PLL_P1_SHIFT 24 -#define PMU5_PLL_P2_MASK 0x00f00000 -#define PMU5_PLL_P2_SHIFT 20 -#define PMU5_PLL_M14_OFF 1 -#define PMU5_PLL_MDIV_MASK 0x000000ff -#define PMU5_PLL_MDIV_WIDTH 8 -#define PMU5_PLL_NM5_OFF 2 -#define PMU5_PLL_NDIV_MASK 0xfff00000 -#define PMU5_PLL_NDIV_SHIFT 20 -#define PMU5_PLL_NDIV_MODE_MASK 0x000e0000 -#define PMU5_PLL_NDIV_MODE_SHIFT 17 -#define PMU5_PLL_FMAB_OFF 3 -#define PMU5_PLL_MRAT_MASK 0xf0000000 -#define PMU5_PLL_MRAT_SHIFT 28 -#define PMU5_PLL_ABRAT_MASK 0x08000000 -#define PMU5_PLL_ABRAT_SHIFT 27 -#define PMU5_PLL_FDIV_MASK 0x07ffffff -#define PMU5_PLL_PLLCTL_OFF 4 -#define PMU5_PLL_PCHI_OFF 5 -#define PMU5_PLL_PCHI_MASK 0x0000003f - -/* pmu XtalFreqRatio */ -#define PMU_XTALFREQ_REG_ILPCTR_MASK 0x00001FFF -#define PMU_XTALFREQ_REG_MEASURE_MASK 0x80000000 -#define PMU_XTALFREQ_REG_MEASURE_SHIFT 31 - -/* Divider allocation in 4716/47162/5356/5357 */ -#define PMU5_MAINPLL_CPU 1 -#define PMU5_MAINPLL_MEM 2 -#define PMU5_MAINPLL_SI 3 - -#define PMU7_PLL_PLLCTL7 7 -#define PMU7_PLL_PLLCTL8 8 -#define PMU7_PLL_PLLCTL11 11 - -/* PLL usage in 4716/47162 */ -#define PMU4716_MAINPLL_PLL0 12 - -/* PLL usage in 5356/5357 */ -#define PMU5356_MAINPLL_PLL0 0 -#define PMU5357_MAINPLL_PLL0 0 - -/* 4716/47162 resources */ -#define RES4716_PROC_PLL_ON 0x00000040 -#define RES4716_PROC_HT_AVAIL 0x00000080 - -/* 4716/4717/4718 Chip specific ChipControl register bits */ -#define CCTRL471X_I2S_PINS_ENABLE 0x0080 /* I2S pins off by default, shared with pflash */ - -/* 5354 resources */ -#define RES5354_EXT_SWITCHER_PWM 0 /* 0x00001 */ -#define RES5354_BB_SWITCHER_PWM 1 /* 0x00002 */ -#define RES5354_BB_SWITCHER_BURST 2 /* 0x00004 */ -#define RES5354_BB_EXT_SWITCHER_BURST 3 /* 0x00008 */ -#define RES5354_ILP_REQUEST 4 /* 0x00010 */ -#define RES5354_RADIO_SWITCHER_PWM 5 /* 0x00020 */ -#define RES5354_RADIO_SWITCHER_BURST 6 /* 0x00040 */ -#define RES5354_ROM_SWITCH 7 /* 0x00080 */ -#define RES5354_PA_REF_LDO 8 /* 0x00100 */ -#define RES5354_RADIO_LDO 9 /* 0x00200 */ -#define RES5354_AFE_LDO 10 /* 0x00400 */ -#define RES5354_PLL_LDO 11 /* 0x00800 */ -#define RES5354_BG_FILTBYP 12 /* 0x01000 */ -#define RES5354_TX_FILTBYP 13 /* 0x02000 */ -#define RES5354_RX_FILTBYP 14 /* 0x04000 */ -#define RES5354_XTAL_PU 15 /* 0x08000 */ -#define RES5354_XTAL_EN 16 /* 0x10000 */ -#define RES5354_BB_PLL_FILTBYP 17 /* 0x20000 */ -#define RES5354_RF_PLL_FILTBYP 18 /* 0x40000 */ -#define RES5354_BB_PLL_PU 19 /* 0x80000 */ - -/* 5357 Chip specific ChipControl register bits */ -#define CCTRL5357_EXTPA (1<<14) /* extPA in ChipControl 1, bit 14 */ -#define CCTRL5357_ANT_MUX_2o3 (1<<15) /* 2o3 in ChipControl 1, bit 15 */ - -/* 4328 resources */ -#define RES4328_EXT_SWITCHER_PWM 0 /* 0x00001 */ -#define RES4328_BB_SWITCHER_PWM 1 /* 0x00002 */ -#define RES4328_BB_SWITCHER_BURST 2 /* 0x00004 */ -#define RES4328_BB_EXT_SWITCHER_BURST 3 /* 0x00008 */ -#define RES4328_ILP_REQUEST 4 /* 0x00010 */ -#define RES4328_RADIO_SWITCHER_PWM 5 /* 0x00020 */ -#define RES4328_RADIO_SWITCHER_BURST 6 /* 0x00040 */ -#define RES4328_ROM_SWITCH 7 /* 0x00080 */ -#define RES4328_PA_REF_LDO 8 /* 0x00100 */ -#define RES4328_RADIO_LDO 9 /* 0x00200 */ -#define RES4328_AFE_LDO 10 /* 0x00400 */ -#define RES4328_PLL_LDO 11 /* 0x00800 */ -#define RES4328_BG_FILTBYP 12 /* 0x01000 */ -#define RES4328_TX_FILTBYP 13 /* 0x02000 */ -#define RES4328_RX_FILTBYP 14 /* 0x04000 */ -#define RES4328_XTAL_PU 15 /* 0x08000 */ -#define RES4328_XTAL_EN 16 /* 0x10000 */ -#define RES4328_BB_PLL_FILTBYP 17 /* 0x20000 */ -#define RES4328_RF_PLL_FILTBYP 18 /* 0x40000 */ -#define RES4328_BB_PLL_PU 19 /* 0x80000 */ - -/* 4325 A0/A1 resources */ -#define RES4325_BUCK_BOOST_BURST 0 /* 0x00000001 */ -#define RES4325_CBUCK_BURST 1 /* 0x00000002 */ -#define RES4325_CBUCK_PWM 2 /* 0x00000004 */ -#define RES4325_CLDO_CBUCK_BURST 3 /* 0x00000008 */ -#define RES4325_CLDO_CBUCK_PWM 4 /* 0x00000010 */ -#define RES4325_BUCK_BOOST_PWM 5 /* 0x00000020 */ -#define RES4325_ILP_REQUEST 6 /* 0x00000040 */ -#define RES4325_ABUCK_BURST 7 /* 0x00000080 */ -#define RES4325_ABUCK_PWM 8 /* 0x00000100 */ -#define RES4325_LNLDO1_PU 9 /* 0x00000200 */ -#define RES4325_OTP_PU 10 /* 0x00000400 */ -#define RES4325_LNLDO3_PU 11 /* 0x00000800 */ -#define RES4325_LNLDO4_PU 12 /* 0x00001000 */ -#define RES4325_XTAL_PU 13 /* 0x00002000 */ -#define RES4325_ALP_AVAIL 14 /* 0x00004000 */ -#define RES4325_RX_PWRSW_PU 15 /* 0x00008000 */ -#define RES4325_TX_PWRSW_PU 16 /* 0x00010000 */ -#define RES4325_RFPLL_PWRSW_PU 17 /* 0x00020000 */ -#define RES4325_LOGEN_PWRSW_PU 18 /* 0x00040000 */ -#define RES4325_AFE_PWRSW_PU 19 /* 0x00080000 */ -#define RES4325_BBPLL_PWRSW_PU 20 /* 0x00100000 */ -#define RES4325_HT_AVAIL 21 /* 0x00200000 */ - -/* 4325 B0/C0 resources */ -#define RES4325B0_CBUCK_LPOM 1 /* 0x00000002 */ -#define RES4325B0_CBUCK_BURST 2 /* 0x00000004 */ -#define RES4325B0_CBUCK_PWM 3 /* 0x00000008 */ -#define RES4325B0_CLDO_PU 4 /* 0x00000010 */ - -/* 4325 C1 resources */ -#define RES4325C1_LNLDO2_PU 12 /* 0x00001000 */ - -/* 4325 chip-specific ChipStatus register bits */ -#define CST4325_SPROM_OTP_SEL_MASK 0x00000003 -#define CST4325_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */ -#define CST4325_SPROM_SEL 1 /* OTP is powered up, SPROM is present */ -#define CST4325_OTP_SEL 2 /* OTP is powered up, no SPROM */ -#define CST4325_OTP_PWRDN 3 /* OTP is powered down, SPROM is present */ -#define CST4325_SDIO_USB_MODE_MASK 0x00000004 -#define CST4325_SDIO_USB_MODE_SHIFT 2 -#define CST4325_RCAL_VALID_MASK 0x00000008 -#define CST4325_RCAL_VALID_SHIFT 3 -#define CST4325_RCAL_VALUE_MASK 0x000001f0 -#define CST4325_RCAL_VALUE_SHIFT 4 -#define CST4325_PMUTOP_2B_MASK 0x00000200 /* 1 for 2b, 0 for to 2a */ -#define CST4325_PMUTOP_2B_SHIFT 9 - -#define RES4329_RESERVED0 0 /* 0x00000001 */ -#define RES4329_CBUCK_LPOM 1 /* 0x00000002 */ -#define RES4329_CBUCK_BURST 2 /* 0x00000004 */ -#define RES4329_CBUCK_PWM 3 /* 0x00000008 */ -#define RES4329_CLDO_PU 4 /* 0x00000010 */ -#define RES4329_PALDO_PU 5 /* 0x00000020 */ -#define RES4329_ILP_REQUEST 6 /* 0x00000040 */ -#define RES4329_RESERVED7 7 /* 0x00000080 */ -#define RES4329_RESERVED8 8 /* 0x00000100 */ -#define RES4329_LNLDO1_PU 9 /* 0x00000200 */ -#define RES4329_OTP_PU 10 /* 0x00000400 */ -#define RES4329_RESERVED11 11 /* 0x00000800 */ -#define RES4329_LNLDO2_PU 12 /* 0x00001000 */ -#define RES4329_XTAL_PU 13 /* 0x00002000 */ -#define RES4329_ALP_AVAIL 14 /* 0x00004000 */ -#define RES4329_RX_PWRSW_PU 15 /* 0x00008000 */ -#define RES4329_TX_PWRSW_PU 16 /* 0x00010000 */ -#define RES4329_RFPLL_PWRSW_PU 17 /* 0x00020000 */ -#define RES4329_LOGEN_PWRSW_PU 18 /* 0x00040000 */ -#define RES4329_AFE_PWRSW_PU 19 /* 0x00080000 */ -#define RES4329_BBPLL_PWRSW_PU 20 /* 0x00100000 */ -#define RES4329_HT_AVAIL 21 /* 0x00200000 */ - -#define CST4329_SPROM_OTP_SEL_MASK 0x00000003 -#define CST4329_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */ -#define CST4329_SPROM_SEL 1 /* OTP is powered up, SPROM is present */ -#define CST4329_OTP_SEL 2 /* OTP is powered up, no SPROM */ -#define CST4329_OTP_PWRDN 3 /* OTP is powered down, SPROM is present */ -#define CST4329_SPI_SDIO_MODE_MASK 0x00000004 -#define CST4329_SPI_SDIO_MODE_SHIFT 2 - -/* 4312 chip-specific ChipStatus register bits */ -#define CST4312_SPROM_OTP_SEL_MASK 0x00000003 -#define CST4312_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */ -#define CST4312_SPROM_SEL 1 /* OTP is powered up, SPROM is present */ -#define CST4312_OTP_SEL 2 /* OTP is powered up, no SPROM */ -#define CST4312_OTP_BAD 3 /* OTP is broken, SPROM is present */ - -/* 4312 resources (all PMU chips with little memory constraint) */ -#define RES4312_SWITCHER_BURST 0 /* 0x00000001 */ -#define RES4312_SWITCHER_PWM 1 /* 0x00000002 */ -#define RES4312_PA_REF_LDO 2 /* 0x00000004 */ -#define RES4312_CORE_LDO_BURST 3 /* 0x00000008 */ -#define RES4312_CORE_LDO_PWM 4 /* 0x00000010 */ -#define RES4312_RADIO_LDO 5 /* 0x00000020 */ -#define RES4312_ILP_REQUEST 6 /* 0x00000040 */ -#define RES4312_BG_FILTBYP 7 /* 0x00000080 */ -#define RES4312_TX_FILTBYP 8 /* 0x00000100 */ -#define RES4312_RX_FILTBYP 9 /* 0x00000200 */ -#define RES4312_XTAL_PU 10 /* 0x00000400 */ -#define RES4312_ALP_AVAIL 11 /* 0x00000800 */ -#define RES4312_BB_PLL_FILTBYP 12 /* 0x00001000 */ -#define RES4312_RF_PLL_FILTBYP 13 /* 0x00002000 */ -#define RES4312_HT_AVAIL 14 /* 0x00004000 */ - -/* 4322 resources */ -#define RES4322_RF_LDO 0 -#define RES4322_ILP_REQUEST 1 -#define RES4322_XTAL_PU 2 -#define RES4322_ALP_AVAIL 3 -#define RES4322_SI_PLL_ON 4 -#define RES4322_HT_SI_AVAIL 5 -#define RES4322_PHY_PLL_ON 6 -#define RES4322_HT_PHY_AVAIL 7 -#define RES4322_OTP_PU 8 - -/* 4322 chip-specific ChipStatus register bits */ -#define CST4322_XTAL_FREQ_20_40MHZ 0x00000020 -#define CST4322_SPROM_OTP_SEL_MASK 0x000000c0 -#define CST4322_SPROM_OTP_SEL_SHIFT 6 -#define CST4322_NO_SPROM_OTP 0 /* no OTP, no SPROM */ -#define CST4322_SPROM_PRESENT 1 /* SPROM is present */ -#define CST4322_OTP_PRESENT 2 /* OTP is present */ -#define CST4322_PCI_OR_USB 0x00000100 -#define CST4322_BOOT_MASK 0x00000600 -#define CST4322_BOOT_SHIFT 9 -#define CST4322_BOOT_FROM_SRAM 0 /* boot from SRAM, ARM in reset */ -#define CST4322_BOOT_FROM_ROM 1 /* boot from ROM */ -#define CST4322_BOOT_FROM_FLASH 2 /* boot from FLASH */ -#define CST4322_BOOT_FROM_INVALID 3 -#define CST4322_ILP_DIV_EN 0x00000800 -#define CST4322_FLASH_TYPE_MASK 0x00001000 -#define CST4322_FLASH_TYPE_SHIFT 12 -#define CST4322_FLASH_TYPE_SHIFT_ST 0 /* ST serial FLASH */ -#define CST4322_FLASH_TYPE_SHIFT_ATMEL 1 /* ATMEL flash */ -#define CST4322_ARM_TAP_SEL 0x00002000 -#define CST4322_RES_INIT_MODE_MASK 0x0000c000 -#define CST4322_RES_INIT_MODE_SHIFT 14 -#define CST4322_RES_INIT_MODE_ILPAVAIL 0 /* resinitmode: ILP available */ -#define CST4322_RES_INIT_MODE_ILPREQ 1 /* resinitmode: ILP request */ -#define CST4322_RES_INIT_MODE_ALPAVAIL 2 /* resinitmode: ALP available */ -#define CST4322_RES_INIT_MODE_HTAVAIL 3 /* resinitmode: HT available */ -#define CST4322_PCIPLLCLK_GATING 0x00010000 -#define CST4322_CLK_SWITCH_PCI_TO_ALP 0x00020000 -#define CST4322_PCI_CARDBUS_MODE 0x00040000 - -/* 43224 chip-specific ChipControl register bits */ -#define CCTRL43224_GPIO_TOGGLE 0x8000 -#define CCTRL_43224A0_12MA_LED_DRIVE 0x00F000F0 /* 12 mA drive strength */ -#define CCTRL_43224B0_12MA_LED_DRIVE 0xF0 /* 12 mA drive strength for later 43224s */ - -/* 43236 resources */ -#define RES43236_REGULATOR 0 -#define RES43236_ILP_REQUEST 1 -#define RES43236_XTAL_PU 2 -#define RES43236_ALP_AVAIL 3 -#define RES43236_SI_PLL_ON 4 -#define RES43236_HT_SI_AVAIL 5 - -/* 43236 chip-specific ChipControl register bits */ -#define CCTRL43236_BT_COEXIST (1<<0) /* 0 disable */ -#define CCTRL43236_SECI (1<<1) /* 0 SECI is disabled (JATG functional) */ -#define CCTRL43236_EXT_LNA (1<<2) /* 0 disable */ -#define CCTRL43236_ANT_MUX_2o3 (1<<3) /* 2o3 mux, chipcontrol bit 3 */ -#define CCTRL43236_GSIO (1<<4) /* 0 disable */ - -/* 43236 Chip specific ChipStatus register bits */ -#define CST43236_SFLASH_MASK 0x00000040 -#define CST43236_OTP_MASK 0x00000080 -#define CST43236_HSIC_MASK 0x00000100 /* USB/HSIC */ -#define CST43236_BP_CLK 0x00000200 /* 120/96Mbps */ -#define CST43236_BOOT_MASK 0x00001800 -#define CST43236_BOOT_SHIFT 11 -#define CST43236_BOOT_FROM_SRAM 0 /* boot from SRAM, ARM in reset */ -#define CST43236_BOOT_FROM_ROM 1 /* boot from ROM */ -#define CST43236_BOOT_FROM_FLASH 2 /* boot from FLASH */ -#define CST43236_BOOT_FROM_INVALID 3 - -/* 4331 resources */ -#define RES4331_REGULATOR 0 -#define RES4331_ILP_REQUEST 1 -#define RES4331_XTAL_PU 2 -#define RES4331_ALP_AVAIL 3 -#define RES4331_SI_PLL_ON 4 -#define RES4331_HT_SI_AVAIL 5 - -/* 4331 chip-specific ChipControl register bits */ -#define CCTRL4331_BT_COEXIST (1<<0) /* 0 disable */ -#define CCTRL4331_SECI (1<<1) /* 0 SECI is disabled (JATG functional) */ -#define CCTRL4331_EXT_LNA (1<<2) /* 0 disable */ -#define CCTRL4331_SPROM_GPIO13_15 (1<<3) /* sprom/gpio13-15 mux */ -#define CCTRL4331_EXTPA_EN (1<<4) /* 0 ext pa disable, 1 ext pa enabled */ -#define CCTRL4331_GPIOCLK_ON_SPROMCS (1<<5) /* set drive out GPIO_CLK on sprom_cs pin */ -#define CCTRL4331_PCIE_MDIO_ON_SPROMCS (1<<6) /* use sprom_cs pin as PCIE mdio interface */ -#define CCTRL4331_EXTPA_ON_GPIO2_5 (1<<7) /* aband extpa will be at gpio2/5 and sprom_dout */ -#define CCTRL4331_OVR_PIPEAUXCLKEN (1<<8) /* override core control on pipe_AuxClkEnable */ -#define CCTRL4331_OVR_PIPEAUXPWRDOWN (1<<9) /* override core control on pipe_AuxPowerDown */ -#define CCTRL4331_PCIE_AUXCLKEN (1<<10) /* pcie_auxclkenable */ -#define CCTRL4331_PCIE_PIPE_PLLDOWN (1<<11) /* pcie_pipe_pllpowerdown */ -#define CCTRL4331_BT_SHD0_ON_GPIO4 (1<<16) /* enable bt_shd0 at gpio4 */ -#define CCTRL4331_BT_SHD1_ON_GPIO5 (1<<17) /* enable bt_shd1 at gpio5 */ - -/* 4331 Chip specific ChipStatus register bits */ -#define CST4331_XTAL_FREQ 0x00000001 /* crystal frequency 20/40Mhz */ -#define CST4331_SPROM_PRESENT 0x00000002 -#define CST4331_OTP_PRESENT 0x00000004 -#define CST4331_LDO_RF 0x00000008 -#define CST4331_LDO_PAR 0x00000010 - -/* 4315 resources */ -#define RES4315_CBUCK_LPOM 1 /* 0x00000002 */ -#define RES4315_CBUCK_BURST 2 /* 0x00000004 */ -#define RES4315_CBUCK_PWM 3 /* 0x00000008 */ -#define RES4315_CLDO_PU 4 /* 0x00000010 */ -#define RES4315_PALDO_PU 5 /* 0x00000020 */ -#define RES4315_ILP_REQUEST 6 /* 0x00000040 */ -#define RES4315_LNLDO1_PU 9 /* 0x00000200 */ -#define RES4315_OTP_PU 10 /* 0x00000400 */ -#define RES4315_LNLDO2_PU 12 /* 0x00001000 */ -#define RES4315_XTAL_PU 13 /* 0x00002000 */ -#define RES4315_ALP_AVAIL 14 /* 0x00004000 */ -#define RES4315_RX_PWRSW_PU 15 /* 0x00008000 */ -#define RES4315_TX_PWRSW_PU 16 /* 0x00010000 */ -#define RES4315_RFPLL_PWRSW_PU 17 /* 0x00020000 */ -#define RES4315_LOGEN_PWRSW_PU 18 /* 0x00040000 */ -#define RES4315_AFE_PWRSW_PU 19 /* 0x00080000 */ -#define RES4315_BBPLL_PWRSW_PU 20 /* 0x00100000 */ -#define RES4315_HT_AVAIL 21 /* 0x00200000 */ - -/* 4315 chip-specific ChipStatus register bits */ -#define CST4315_SPROM_OTP_SEL_MASK 0x00000003 /* gpio [7:6], SDIO CIS selection */ -#define CST4315_DEFCIS_SEL 0x00000000 /* use default CIS, OTP is powered up */ -#define CST4315_SPROM_SEL 0x00000001 /* use SPROM, OTP is powered up */ -#define CST4315_OTP_SEL 0x00000002 /* use OTP, OTP is powered up */ -#define CST4315_OTP_PWRDN 0x00000003 /* use SPROM, OTP is powered down */ -#define CST4315_SDIO_MODE 0x00000004 /* gpio [8], sdio/usb mode */ -#define CST4315_RCAL_VALID 0x00000008 -#define CST4315_RCAL_VALUE_MASK 0x000001f0 -#define CST4315_RCAL_VALUE_SHIFT 4 -#define CST4315_PALDO_EXTPNP 0x00000200 /* PALDO is configured with external PNP */ -#define CST4315_CBUCK_MODE_MASK 0x00000c00 -#define CST4315_CBUCK_MODE_BURST 0x00000400 -#define CST4315_CBUCK_MODE_LPBURST 0x00000c00 - -/* 4319 resources */ -#define RES4319_CBUCK_LPOM 1 /* 0x00000002 */ -#define RES4319_CBUCK_BURST 2 /* 0x00000004 */ -#define RES4319_CBUCK_PWM 3 /* 0x00000008 */ -#define RES4319_CLDO_PU 4 /* 0x00000010 */ -#define RES4319_PALDO_PU 5 /* 0x00000020 */ -#define RES4319_ILP_REQUEST 6 /* 0x00000040 */ -#define RES4319_LNLDO1_PU 9 /* 0x00000200 */ -#define RES4319_OTP_PU 10 /* 0x00000400 */ -#define RES4319_LNLDO2_PU 12 /* 0x00001000 */ -#define RES4319_XTAL_PU 13 /* 0x00002000 */ -#define RES4319_ALP_AVAIL 14 /* 0x00004000 */ -#define RES4319_RX_PWRSW_PU 15 /* 0x00008000 */ -#define RES4319_TX_PWRSW_PU 16 /* 0x00010000 */ -#define RES4319_RFPLL_PWRSW_PU 17 /* 0x00020000 */ -#define RES4319_LOGEN_PWRSW_PU 18 /* 0x00040000 */ -#define RES4319_AFE_PWRSW_PU 19 /* 0x00080000 */ -#define RES4319_BBPLL_PWRSW_PU 20 /* 0x00100000 */ -#define RES4319_HT_AVAIL 21 /* 0x00200000 */ - -/* 4319 chip-specific ChipStatus register bits */ -#define CST4319_SPI_CPULESSUSB 0x00000001 -#define CST4319_SPI_CLK_POL 0x00000002 -#define CST4319_SPI_CLK_PH 0x00000008 -#define CST4319_SPROM_OTP_SEL_MASK 0x000000c0 /* gpio [7:6], SDIO CIS selection */ -#define CST4319_SPROM_OTP_SEL_SHIFT 6 -#define CST4319_DEFCIS_SEL 0x00000000 /* use default CIS, OTP is powered up */ -#define CST4319_SPROM_SEL 0x00000040 /* use SPROM, OTP is powered up */ -#define CST4319_OTP_SEL 0x00000080 /* use OTP, OTP is powered up */ -#define CST4319_OTP_PWRDN 0x000000c0 /* use SPROM, OTP is powered down */ -#define CST4319_SDIO_USB_MODE 0x00000100 /* gpio [8], sdio/usb mode */ -#define CST4319_REMAP_SEL_MASK 0x00000600 -#define CST4319_ILPDIV_EN 0x00000800 -#define CST4319_XTAL_PD_POL 0x00001000 -#define CST4319_LPO_SEL 0x00002000 -#define CST4319_RES_INIT_MODE 0x0000c000 -#define CST4319_PALDO_EXTPNP 0x00010000 /* PALDO is configured with external PNP */ -#define CST4319_CBUCK_MODE_MASK 0x00060000 -#define CST4319_CBUCK_MODE_BURST 0x00020000 -#define CST4319_CBUCK_MODE_LPBURST 0x00060000 -#define CST4319_RCAL_VALID 0x01000000 -#define CST4319_RCAL_VALUE_MASK 0x3e000000 -#define CST4319_RCAL_VALUE_SHIFT 25 - -#define PMU1_PLL0_CHIPCTL0 0 -#define PMU1_PLL0_CHIPCTL1 1 -#define PMU1_PLL0_CHIPCTL2 2 -#define CCTL_4319USB_XTAL_SEL_MASK 0x00180000 -#define CCTL_4319USB_XTAL_SEL_SHIFT 19 -#define CCTL_4319USB_48MHZ_PLL_SEL 1 -#define CCTL_4319USB_24MHZ_PLL_SEL 2 - -/* PMU resources for 4336 */ -#define RES4336_CBUCK_LPOM 0 -#define RES4336_CBUCK_BURST 1 -#define RES4336_CBUCK_LP_PWM 2 -#define RES4336_CBUCK_PWM 3 -#define RES4336_CLDO_PU 4 -#define RES4336_DIS_INT_RESET_PD 5 -#define RES4336_ILP_REQUEST 6 -#define RES4336_LNLDO_PU 7 -#define RES4336_LDO3P3_PU 8 -#define RES4336_OTP_PU 9 -#define RES4336_XTAL_PU 10 -#define RES4336_ALP_AVAIL 11 -#define RES4336_RADIO_PU 12 -#define RES4336_BG_PU 13 -#define RES4336_VREG1p4_PU_PU 14 -#define RES4336_AFE_PWRSW_PU 15 -#define RES4336_RX_PWRSW_PU 16 -#define RES4336_TX_PWRSW_PU 17 -#define RES4336_BB_PWRSW_PU 18 -#define RES4336_SYNTH_PWRSW_PU 19 -#define RES4336_MISC_PWRSW_PU 20 -#define RES4336_LOGEN_PWRSW_PU 21 -#define RES4336_BBPLL_PWRSW_PU 22 -#define RES4336_MACPHY_CLKAVAIL 23 -#define RES4336_HT_AVAIL 24 -#define RES4336_RSVD 25 - -/* 4336 chip-specific ChipStatus register bits */ -#define CST4336_SPI_MODE_MASK 0x00000001 -#define CST4336_SPROM_PRESENT 0x00000002 -#define CST4336_OTP_PRESENT 0x00000004 -#define CST4336_ARMREMAP_0 0x00000008 -#define CST4336_ILPDIV_EN_MASK 0x00000010 -#define CST4336_ILPDIV_EN_SHIFT 4 -#define CST4336_XTAL_PD_POL_MASK 0x00000020 -#define CST4336_XTAL_PD_POL_SHIFT 5 -#define CST4336_LPO_SEL_MASK 0x00000040 -#define CST4336_LPO_SEL_SHIFT 6 -#define CST4336_RES_INIT_MODE_MASK 0x00000180 -#define CST4336_RES_INIT_MODE_SHIFT 7 -#define CST4336_CBUCK_MODE_MASK 0x00000600 -#define CST4336_CBUCK_MODE_SHIFT 9 - -/* 4330 resources */ -#define RES4330_CBUCK_LPOM 0 -#define RES4330_CBUCK_BURST 1 -#define RES4330_CBUCK_LP_PWM 2 -#define RES4330_CBUCK_PWM 3 -#define RES4330_CLDO_PU 4 -#define RES4330_DIS_INT_RESET_PD 5 -#define RES4330_ILP_REQUEST 6 -#define RES4330_LNLDO_PU 7 -#define RES4330_LDO3P3_PU 8 -#define RES4330_OTP_PU 9 -#define RES4330_XTAL_PU 10 -#define RES4330_ALP_AVAIL 11 -#define RES4330_RADIO_PU 12 -#define RES4330_BG_PU 13 -#define RES4330_VREG1p4_PU_PU 14 -#define RES4330_AFE_PWRSW_PU 15 -#define RES4330_RX_PWRSW_PU 16 -#define RES4330_TX_PWRSW_PU 17 -#define RES4330_BB_PWRSW_PU 18 -#define RES4330_SYNTH_PWRSW_PU 19 -#define RES4330_MISC_PWRSW_PU 20 -#define RES4330_LOGEN_PWRSW_PU 21 -#define RES4330_BBPLL_PWRSW_PU 22 -#define RES4330_MACPHY_CLKAVAIL 23 -#define RES4330_HT_AVAIL 24 -#define RES4330_5gRX_PWRSW_PU 25 -#define RES4330_5gTX_PWRSW_PU 26 -#define RES4330_5g_LOGEN_PWRSW_PU 27 - -/* 4330 chip-specific ChipStatus register bits */ -#define CST4330_CHIPMODE_SDIOD(cs) (((cs) & 0x7) < 6) /* SDIO || gSPI */ -#define CST4330_CHIPMODE_USB20D(cs) (((cs) & 0x7) >= 6) /* USB || USBDA */ -#define CST4330_CHIPMODE_SDIO(cs) (((cs) & 0x4) == 0) /* SDIO */ -#define CST4330_CHIPMODE_GSPI(cs) (((cs) & 0x6) == 4) /* gSPI */ -#define CST4330_CHIPMODE_USB(cs) (((cs) & 0x7) == 6) /* USB packet-oriented */ -#define CST4330_CHIPMODE_USBDA(cs) (((cs) & 0x7) == 7) /* USB Direct Access */ -#define CST4330_OTP_PRESENT 0x00000010 -#define CST4330_LPO_AUTODET_EN 0x00000020 -#define CST4330_ARMREMAP_0 0x00000040 -#define CST4330_SPROM_PRESENT 0x00000080 /* takes priority over OTP if both set */ -#define CST4330_ILPDIV_EN 0x00000100 -#define CST4330_LPO_SEL 0x00000200 -#define CST4330_RES_INIT_MODE_SHIFT 10 -#define CST4330_RES_INIT_MODE_MASK 0x00000c00 -#define CST4330_CBUCK_MODE_SHIFT 12 -#define CST4330_CBUCK_MODE_MASK 0x00003000 -#define CST4330_CBUCK_POWER_OK 0x00004000 -#define CST4330_BB_PLL_LOCKED 0x00008000 -#define SOCDEVRAM_4330_BP_ADDR 0x1E000000 -#define SOCDEVRAM_4330_ARM_ADDR 0x00800000 - -/* 4313 resources */ -#define RES4313_BB_PU_RSRC 0 -#define RES4313_ILP_REQ_RSRC 1 -#define RES4313_XTAL_PU_RSRC 2 -#define RES4313_ALP_AVAIL_RSRC 3 -#define RES4313_RADIO_PU_RSRC 4 -#define RES4313_BG_PU_RSRC 5 -#define RES4313_VREG1P4_PU_RSRC 6 -#define RES4313_AFE_PWRSW_RSRC 7 -#define RES4313_RX_PWRSW_RSRC 8 -#define RES4313_TX_PWRSW_RSRC 9 -#define RES4313_BB_PWRSW_RSRC 10 -#define RES4313_SYNTH_PWRSW_RSRC 11 -#define RES4313_MISC_PWRSW_RSRC 12 -#define RES4313_BB_PLL_PWRSW_RSRC 13 -#define RES4313_HT_AVAIL_RSRC 14 -#define RES4313_MACPHY_CLK_AVAIL_RSRC 15 - -/* 4313 chip-specific ChipStatus register bits */ -#define CST4313_SPROM_PRESENT 1 -#define CST4313_OTP_PRESENT 2 -#define CST4313_SPROM_OTP_SEL_MASK 0x00000002 -#define CST4313_SPROM_OTP_SEL_SHIFT 0 - -/* 4313 Chip specific ChipControl register bits */ -#define CCTRL_4313_12MA_LED_DRIVE 0x00000007 /* 12 mA drive strengh for later 4313 */ - -/* 43228 resources */ -#define RES43228_NOT_USED 0 -#define RES43228_ILP_REQUEST 1 -#define RES43228_XTAL_PU 2 -#define RES43228_ALP_AVAIL 3 -#define RES43228_PLL_EN 4 -#define RES43228_HT_PHY_AVAIL 5 - -/* 43228 chipstatus reg bits */ -#define CST43228_ILP_DIV_EN 0x1 -#define CST43228_OTP_PRESENT 0x2 -#define CST43228_SERDES_REFCLK_PADSEL 0x4 -#define CST43228_SDIO_MODE 0x8 - -#define CST43228_SDIO_OTP_PRESENT 0x10 -#define CST43228_SDIO_RESET 0x20 - -/* -* Maximum delay for the PMU state transition in us. -* This is an upper bound intended for spinwaits etc. -*/ -#define PMU_MAX_TRANSITION_DLY 15000 - -/* PMU resource up transition time in ILP cycles */ -#define PMURES_UP_TRANSITION 2 - -/* -* Register eci_inputlo bitfield values. -* - BT packet type information bits [7:0] -*/ -/* [3:0] - Task (link) type */ -#define BT_ACL 0x00 -#define BT_SCO 0x01 -#define BT_eSCO 0x02 -#define BT_A2DP 0x03 -#define BT_SNIFF 0x04 -#define BT_PAGE_SCAN 0x05 -#define BT_INQUIRY_SCAN 0x06 -#define BT_PAGE 0x07 -#define BT_INQUIRY 0x08 -#define BT_MSS 0x09 -#define BT_PARK 0x0a -#define BT_RSSISCAN 0x0b -#define BT_MD_ACL 0x0c -#define BT_MD_eSCO 0x0d -#define BT_SCAN_WITH_SCO_LINK 0x0e -#define BT_SCAN_WITHOUT_SCO_LINK 0x0f -/* [7:4] = packet duration code */ -/* [8] - Master / Slave */ -#define BT_MASTER 0 -#define BT_SLAVE 1 -/* [11:9] - multi-level priority */ -#define BT_LOWEST_PRIO 0x0 -#define BT_HIGHEST_PRIO 0x3 - -/* WLAN - number of antenna */ -#define WLAN_NUM_ANT1 TXANT_0 -#define WLAN_NUM_ANT2 TXANT_1 - -#endif /* _SBCHIPC_H */ |