diff options
Diffstat (limited to 'drivers/staging/brcm80211/include/bcmutils.h')
-rw-r--r-- | drivers/staging/brcm80211/include/bcmutils.h | 500 |
1 files changed, 0 insertions, 500 deletions
diff --git a/drivers/staging/brcm80211/include/bcmutils.h b/drivers/staging/brcm80211/include/bcmutils.h deleted file mode 100644 index 17683f2f785..00000000000 --- a/drivers/staging/brcm80211/include/bcmutils.h +++ /dev/null @@ -1,500 +0,0 @@ -/* - * Copyright (c) 2010 Broadcom Corporation - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY - * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION - * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef _bcmutils_h_ -#define _bcmutils_h_ - -/* Buffer structure for collecting string-formatted data -* using bcm_bprintf() API. -* Use bcm_binit() to initialize before use -*/ - - struct bcmstrbuf { - char *buf; /* pointer to current position in origbuf */ - unsigned int size; /* current (residual) size in bytes */ - char *origbuf; /* unmodified pointer to orignal buffer */ - unsigned int origsize; /* unmodified orignal buffer size in bytes */ - }; - -/* ** driver-only section ** */ - -#define GPIO_PIN_NOTDEFINED 0x20 /* Pin not defined */ - -/* - * Spin at most 'us' microseconds while 'exp' is true. - * Caller should explicitly test 'exp' when this completes - * and take appropriate error action if 'exp' is still true. - */ -#define SPINWAIT(exp, us) { \ - uint countdown = (us) + 9; \ - while ((exp) && (countdown >= 10)) {\ - udelay(10); \ - countdown -= 10; \ - } \ -} - -/* osl multi-precedence packet queue */ -#ifndef PKTQ_LEN_DEFAULT -#define PKTQ_LEN_DEFAULT 128 /* Max 128 packets */ -#endif -#ifndef PKTQ_MAX_PREC -#define PKTQ_MAX_PREC 16 /* Maximum precedence levels */ -#endif - - struct pktq_prec { - struct sk_buff *head; /* first packet to dequeue */ - struct sk_buff *tail; /* last packet to dequeue */ - u16 len; /* number of queued packets */ - u16 max; /* maximum number of queued packets */ - }; - -/* multi-priority pkt queue */ - struct pktq { - u16 num_prec; /* number of precedences in use */ - u16 hi_prec; /* rapid dequeue hint (>= highest non-empty prec) */ - u16 max; /* total max packets */ - u16 len; /* total number of packets */ - /* q array must be last since # of elements can be either PKTQ_MAX_PREC or 1 */ - struct pktq_prec q[PKTQ_MAX_PREC]; - }; - -#define PKTQ_PREC_ITER(pq, prec) for (prec = (pq)->num_prec - 1; prec >= 0; prec--) - -/* fn(pkt, arg). return true if pkt belongs to if */ -typedef bool(*ifpkt_cb_t) (struct sk_buff *, void *); - -/* operations on a specific precedence in packet queue */ - -#define pktq_psetmax(pq, prec, _max) ((pq)->q[prec].max = (_max)) -#define pktq_plen(pq, prec) ((pq)->q[prec].len) -#define pktq_pavail(pq, prec) ((pq)->q[prec].max - (pq)->q[prec].len) -#define pktq_pfull(pq, prec) ((pq)->q[prec].len >= (pq)->q[prec].max) -#define pktq_pempty(pq, prec) ((pq)->q[prec].len == 0) - -#define pktq_ppeek(pq, prec) ((pq)->q[prec].head) -#define pktq_ppeek_tail(pq, prec) ((pq)->q[prec].tail) - -extern struct sk_buff *bcm_pktq_penq(struct pktq *pq, int prec, - struct sk_buff *p); -extern struct sk_buff *bcm_pktq_penq_head(struct pktq *pq, int prec, - struct sk_buff *p); -extern struct sk_buff *bcm_pktq_pdeq(struct pktq *pq, int prec); -extern struct sk_buff *bcm_pktq_pdeq_tail(struct pktq *pq, int prec); - -/* packet primitives */ -extern struct sk_buff *bcm_pkt_buf_get_skb(uint len); -extern void bcm_pkt_buf_free_skb(struct sk_buff *skb); - -/* Empty the queue at particular precedence level */ -extern void bcm_pktq_pflush(struct pktq *pq, int prec, - bool dir, ifpkt_cb_t fn, void *arg); - -/* operations on a set of precedences in packet queue */ - -extern int bcm_pktq_mlen(struct pktq *pq, uint prec_bmp); -extern struct sk_buff *bcm_pktq_mdeq(struct pktq *pq, uint prec_bmp, - int *prec_out); - -/* operations on packet queue as a whole */ - -#define pktq_len(pq) ((int)(pq)->len) -#define pktq_max(pq) ((int)(pq)->max) -#define pktq_avail(pq) ((int)((pq)->max - (pq)->len)) -#define pktq_full(pq) ((pq)->len >= (pq)->max) -#define pktq_empty(pq) ((pq)->len == 0) - -/* operations for single precedence queues */ -#define pktenq(pq, p) bcm_pktq_penq(((struct pktq *)pq), 0, (p)) -#define pktenq_head(pq, p) bcm_pktq_penq_head(((struct pktq *)pq), 0, (p)) -#define pktdeq(pq) bcm_pktq_pdeq(((struct pktq *)pq), 0) -#define pktdeq_tail(pq) bcm_pktq_pdeq_tail(((struct pktq *)pq), 0) -#define pktqinit(pq, len) bcm_pktq_init(((struct pktq *)pq), 1, len) - -extern void bcm_pktq_init(struct pktq *pq, int num_prec, int max_len); -/* prec_out may be NULL if caller is not interested in return value */ -extern struct sk_buff *bcm_pktq_peek_tail(struct pktq *pq, int *prec_out); -extern void bcm_pktq_flush(struct pktq *pq, bool dir, - ifpkt_cb_t fn, void *arg); - -/* externs */ -/* packet */ -extern uint bcm_pktfrombuf(struct sk_buff *p, - uint offset, int len, unsigned char *buf); -extern uint bcm_pkttotlen(struct sk_buff *p); - -/* ethernet address */ -extern int bcm_ether_atoe(char *p, u8 *ea); - -/* ip address */ - struct ipv4_addr; - extern char *bcm_ip_ntoa(struct ipv4_addr *ia, char *buf); - -#ifdef BCMDBG -extern void bcm_prpkt(const char *msg, struct sk_buff *p0); -#else -#define bcm_prpkt(a, b) -#endif /* BCMDBG */ - -#define bcm_perf_enable() -#define bcmlog(fmt, a1, a2) -#define bcmdumplog(buf, size) (*buf = '\0') -#define bcmdumplogent(buf, idx) -1 - -#define bcmtslog(tstamp, fmt, a1, a2) -#define bcmprinttslogs() -#define bcmprinttstamp(us) - -/* Support for sharing code across in-driver iovar implementations. - * The intent is that a driver use this structure to map iovar names - * to its (private) iovar identifiers, and the lookup function to - * find the entry. Macros are provided to map ids and get/set actions - * into a single number space for a switch statement. - */ - -/* iovar structure */ - typedef struct bcm_iovar { - const char *name; /* name for lookup and display */ - u16 varid; /* id for switch */ - u16 flags; /* driver-specific flag bits */ - u16 type; /* base type of argument */ - u16 minlen; /* min length for buffer vars */ - } bcm_iovar_t; - -/* varid definitions are per-driver, may use these get/set bits */ - -/* IOVar action bits for id mapping */ -#define IOV_GET 0 /* Get an iovar */ -#define IOV_SET 1 /* Set an iovar */ - -/* Varid to actionid mapping */ -#define IOV_GVAL(id) ((id)*2) -#define IOV_SVAL(id) (((id)*2)+IOV_SET) -#define IOV_ISSET(actionid) ((actionid & IOV_SET) == IOV_SET) -#define IOV_ID(actionid) (actionid >> 1) - -/* flags are per-driver based on driver attributes */ - - extern const bcm_iovar_t *bcm_iovar_lookup(const bcm_iovar_t *table, - const char *name); - extern int bcm_iovar_lencheck(const bcm_iovar_t *table, void *arg, - int len, bool set); - -/* Base type definitions */ -#define IOVT_VOID 0 /* no value (implictly set only) */ -#define IOVT_BOOL 1 /* any value ok (zero/nonzero) */ -#define IOVT_INT8 2 /* integer values are range-checked */ -#define IOVT_UINT8 3 /* unsigned int 8 bits */ -#define IOVT_INT16 4 /* int 16 bits */ -#define IOVT_UINT16 5 /* unsigned int 16 bits */ -#define IOVT_INT32 6 /* int 32 bits */ -#define IOVT_UINT32 7 /* unsigned int 32 bits */ -#define IOVT_BUFFER 8 /* buffer is size-checked as per minlen */ -#define BCM_IOVT_VALID(type) (((unsigned int)(type)) <= IOVT_BUFFER) - -/* Initializer for IOV type strings */ -#define BCM_IOV_TYPE_INIT { \ - "void", \ - "bool", \ - "s8", \ - "u8", \ - "s16", \ - "u16", \ - "s32", \ - "u32", \ - "buffer", \ - "" } - -#define BCM_IOVT_IS_INT(type) (\ - (type == IOVT_BOOL) || \ - (type == IOVT_INT8) || \ - (type == IOVT_UINT8) || \ - (type == IOVT_INT16) || \ - (type == IOVT_UINT16) || \ - (type == IOVT_INT32) || \ - (type == IOVT_UINT32)) - -/* ** driver/apps-shared section ** */ - -#define BCME_STRLEN 64 /* Max string length for BCM errors */ - -#ifndef ABS -#define ABS(a) (((a) < 0) ? -(a) : (a)) -#endif /* ABS */ - -#define CEIL(x, y) (((x) + ((y)-1)) / (y)) -#define ISPOWEROF2(x) ((((x)-1)&(x)) == 0) - -/* map physical to virtual I/O */ -#if !defined(CONFIG_MMC_MSM7X00A) -#define REG_MAP(pa, size) ioremap_nocache((unsigned long)(pa), \ - (unsigned long)(size)) -#else -#define REG_MAP(pa, size) (void *)(0) -#endif - -/* register access macros */ -#if defined(BCMSDIO) -#ifdef BRCM_FULLMAC -#include <bcmsdh.h> -#endif -#define OSL_WRITE_REG(r, v) \ - (bcmsdh_reg_write(NULL, (unsigned long)(r), sizeof(*(r)), (v))) -#define OSL_READ_REG(r) \ - (bcmsdh_reg_read(NULL, (unsigned long)(r), sizeof(*(r)))) -#endif - -#if defined(BCMSDIO) -#define SELECT_BUS_WRITE(mmap_op, bus_op) bus_op -#define SELECT_BUS_READ(mmap_op, bus_op) bus_op -#else -#define SELECT_BUS_WRITE(mmap_op, bus_op) mmap_op -#define SELECT_BUS_READ(mmap_op, bus_op) mmap_op -#endif - -/* the largest reasonable packet buffer driver uses for ethernet MTU in bytes */ -#define PKTBUFSZ 2048 - -#define OSL_SYSUPTIME() ((u32)jiffies * (1000 / HZ)) -#ifdef BRCM_FULLMAC -#include <linux/kernel.h> /* for vsn/printf's */ -#include <linux/string.h> /* for mem*, str* */ -#endif -/* bcopy's: Linux kernel doesn't provide these (anymore) */ -#define bcopy(src, dst, len) memcpy((dst), (src), (len)) - -/* register access macros */ -#ifndef __BIG_ENDIAN -#ifndef __mips__ -#define R_REG(r) (\ - SELECT_BUS_READ(sizeof(*(r)) == sizeof(u8) ? \ - readb((volatile u8*)(r)) : \ - sizeof(*(r)) == sizeof(u16) ? readw((volatile u16*)(r)) : \ - readl((volatile u32*)(r)), OSL_READ_REG(r)) \ -) -#else /* __mips__ */ -#define R_REG(r) (\ - SELECT_BUS_READ( \ - ({ \ - __typeof(*(r)) __osl_v; \ - __asm__ __volatile__("sync"); \ - switch (sizeof(*(r))) { \ - case sizeof(u8): \ - __osl_v = readb((volatile u8*)(r)); \ - break; \ - case sizeof(u16): \ - __osl_v = readw((volatile u16*)(r)); \ - break; \ - case sizeof(u32): \ - __osl_v = \ - readl((volatile u32*)(r)); \ - break; \ - } \ - __asm__ __volatile__("sync"); \ - __osl_v; \ - }), \ - ({ \ - __typeof(*(r)) __osl_v; \ - __asm__ __volatile__("sync"); \ - __osl_v = OSL_READ_REG(r); \ - __asm__ __volatile__("sync"); \ - __osl_v; \ - })) \ -) -#endif /* __mips__ */ - -#define W_REG(r, v) do { \ - SELECT_BUS_WRITE( \ - switch (sizeof(*(r))) { \ - case sizeof(u8): \ - writeb((u8)(v), (volatile u8*)(r)); break; \ - case sizeof(u16): \ - writew((u16)(v), (volatile u16*)(r)); break; \ - case sizeof(u32): \ - writel((u32)(v), (volatile u32*)(r)); break; \ - }, \ - (OSL_WRITE_REG(r, v))); \ - } while (0) -#else /* __BIG_ENDIAN */ -#define R_REG(r) (\ - SELECT_BUS_READ( \ - ({ \ - __typeof(*(r)) __osl_v; \ - switch (sizeof(*(r))) { \ - case sizeof(u8): \ - __osl_v = \ - readb((volatile u8*)((r)^3)); \ - break; \ - case sizeof(u16): \ - __osl_v = \ - readw((volatile u16*)((r)^2)); \ - break; \ - case sizeof(u32): \ - __osl_v = readl((volatile u32*)(r)); \ - break; \ - } \ - __osl_v; \ - }), \ - OSL_READ_REG(r)) \ -) -#define W_REG(r, v) do { \ - SELECT_BUS_WRITE( \ - switch (sizeof(*(r))) { \ - case sizeof(u8): \ - writeb((u8)(v), \ - (volatile u8*)((r)^3)); break; \ - case sizeof(u16): \ - writew((u16)(v), \ - (volatile u16*)((r)^2)); break; \ - case sizeof(u32): \ - writel((u32)(v), \ - (volatile u32*)(r)); break; \ - }, \ - (OSL_WRITE_REG(r, v))); \ - } while (0) -#endif /* __BIG_ENDIAN */ - -#define AND_REG(r, v) W_REG((r), R_REG(r) & (v)) -#define OR_REG(r, v) W_REG((r), R_REG(r) | (v)) - -#define SET_REG(r, mask, val) \ - W_REG((r), ((R_REG(r) & ~(mask)) | (val))) - -#ifndef setbit -#ifndef NBBY /* the BSD family defines NBBY */ -#define NBBY 8 /* 8 bits per byte */ -#endif /* #ifndef NBBY */ -#define setbit(a, i) (((u8 *)a)[(i)/NBBY] |= 1<<((i)%NBBY)) -#define clrbit(a, i) (((u8 *)a)[(i)/NBBY] &= ~(1<<((i)%NBBY))) -#define isset(a, i) (((const u8 *)a)[(i)/NBBY] & (1<<((i)%NBBY))) -#define isclr(a, i) ((((const u8 *)a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0) -#endif /* setbit */ - -#define NBITS(type) (sizeof(type) * 8) -#define NBITVAL(nbits) (1 << (nbits)) -#define MAXBITVAL(nbits) ((1 << (nbits)) - 1) -#define NBITMASK(nbits) MAXBITVAL(nbits) -#define MAXNBVAL(nbyte) MAXBITVAL((nbyte) * 8) - -/* basic mux operation - can be optimized on several architectures */ -#define MUX(pred, true, false) ((pred) ? (true) : (false)) - -/* modulo inc/dec - assumes x E [0, bound - 1] */ -#define MODDEC(x, bound) MUX((x) == 0, (bound) - 1, (x) - 1) -#define MODINC(x, bound) MUX((x) == (bound) - 1, 0, (x) + 1) - -/* modulo inc/dec, bound = 2^k */ -#define MODDEC_POW2(x, bound) (((x) - 1) & ((bound) - 1)) -#define MODINC_POW2(x, bound) (((x) + 1) & ((bound) - 1)) - -/* modulo add/sub - assumes x, y E [0, bound - 1] */ -#define MODADD(x, y, bound) \ - MUX((x) + (y) >= (bound), (x) + (y) - (bound), (x) + (y)) -#define MODSUB(x, y, bound) \ - MUX(((int)(x)) - ((int)(y)) < 0, (x) - (y) + (bound), (x) - (y)) - -/* module add/sub, bound = 2^k */ -#define MODADD_POW2(x, y, bound) (((x) + (y)) & ((bound) - 1)) -#define MODSUB_POW2(x, y, bound) (((x) - (y)) & ((bound) - 1)) - -/* crc defines */ -#define CRC8_INIT_VALUE 0xff /* Initial CRC8 checksum value */ -#define CRC8_GOOD_VALUE 0x9f /* Good final CRC8 checksum value */ -#define CRC16_INIT_VALUE 0xffff /* Initial CRC16 checksum value */ -#define CRC16_GOOD_VALUE 0xf0b8 /* Good final CRC16 checksum value */ - -/* bcm_format_flags() bit description structure */ - typedef struct bcm_bit_desc { - u32 bit; - const char *name; - } bcm_bit_desc_t; - -/* tag_ID/length/value_buffer tuple */ - typedef struct bcm_tlv { - u8 id; - u8 len; - u8 data[1]; - } bcm_tlv_t; - -/* Check that bcm_tlv_t fits into the given buflen */ -#define bcm_valid_tlv(elt, buflen) ((buflen) >= 2 && (int)(buflen) >= (int)(2 + (elt)->len)) - -#define ETHER_ADDR_STR_LEN 18 /* 18-bytes of Ethernet address buffer length */ - -/* crypto utility function */ -/* 128-bit xor: *dst = *src1 xor *src2. dst1, src1 and src2 may have any alignment */ - static inline void - xor_128bit_block(const u8 *src1, const u8 *src2, u8 *dst) { - if ( -#ifdef __i386__ - 1 || -#endif - (((unsigned long) src1 | (unsigned long) src2 | (unsigned long) dst) & - 3) == 0) { - /* ARM CM3 rel time: 1229 (727 if alignment check could be omitted) */ - /* x86 supports unaligned. This version runs 6x-9x faster on x86. */ - ((u32 *) dst)[0] = - ((const u32 *)src1)[0] ^ ((const u32 *) - src2)[0]; - ((u32 *) dst)[1] = - ((const u32 *)src1)[1] ^ ((const u32 *) - src2)[1]; - ((u32 *) dst)[2] = - ((const u32 *)src1)[2] ^ ((const u32 *) - src2)[2]; - ((u32 *) dst)[3] = - ((const u32 *)src1)[3] ^ ((const u32 *) - src2)[3]; - } else { - /* ARM CM3 rel time: 4668 (4191 if alignment check could be omitted) */ - int k; - for (k = 0; k < 16; k++) - dst[k] = src1[k] ^ src2[k]; - } - } - -/* externs */ -/* crc */ -extern u8 bcm_crc8(u8 *p, uint nbytes, u8 crc); -/* format/print */ -#if defined(BCMDBG) - extern int bcm_format_flags(const bcm_bit_desc_t *bd, u32 flags, - char *buf, int len); - extern int bcm_format_hex(char *str, const void *bytes, int len); -#endif - extern char *bcm_chipname(uint chipid, char *buf, uint len); - - extern bcm_tlv_t *bcm_parse_tlvs(void *buf, int buflen, - uint key); - -/* multi-bool data type: set of bools, mbool is true if any is set */ - typedef u32 mbool; -#define mboolset(mb, bit) ((mb) |= (bit)) /* set one bool */ -#define mboolclr(mb, bit) ((mb) &= ~(bit)) /* clear one bool */ -#define mboolisset(mb, bit) (((mb) & (bit)) != 0) /* true if one bool is set */ -#define mboolmaskset(mb, mask, val) ((mb) = (((mb) & ~(mask)) | (val))) - -/* power conversion */ - extern u16 bcm_qdbm_to_mw(u8 qdbm); - extern u8 bcm_mw_to_qdbm(u16 mw); - - extern void bcm_binit(struct bcmstrbuf *b, char *buf, uint size); - extern int bcm_bprintf(struct bcmstrbuf *b, const char *fmt, ...); - - extern uint bcm_mkiovar(char *name, char *data, uint datalen, char *buf, - uint len); - extern uint bcm_bitcount(u8 *bitmap, uint bytelength); - -#endif /* _bcmutils_h_ */ |