diff options
Diffstat (limited to 'drivers/net/cxgb4vf')
| -rw-r--r-- | drivers/net/cxgb4vf/Makefile | 7 | ||||
| -rw-r--r-- | drivers/net/cxgb4vf/adapter.h | 540 | ||||
| -rw-r--r-- | drivers/net/cxgb4vf/cxgb4vf_main.c | 2888 | ||||
| -rw-r--r-- | drivers/net/cxgb4vf/sge.c | 2454 | ||||
| -rw-r--r-- | drivers/net/cxgb4vf/t4vf_common.h | 273 | ||||
| -rw-r--r-- | drivers/net/cxgb4vf/t4vf_defs.h | 121 | ||||
| -rw-r--r-- | drivers/net/cxgb4vf/t4vf_hw.c | 1333 |
7 files changed, 7616 insertions, 0 deletions
diff --git a/drivers/net/cxgb4vf/Makefile b/drivers/net/cxgb4vf/Makefile new file mode 100644 index 00000000000..d72ee26cb4c --- /dev/null +++ b/drivers/net/cxgb4vf/Makefile @@ -0,0 +1,7 @@ +# +# Chelsio T4 SR-IOV Virtual Function Driver +# + +obj-$(CONFIG_CHELSIO_T4VF) += cxgb4vf.o + +cxgb4vf-objs := cxgb4vf_main.o t4vf_hw.o sge.o diff --git a/drivers/net/cxgb4vf/adapter.h b/drivers/net/cxgb4vf/adapter.h new file mode 100644 index 00000000000..8ea01962e04 --- /dev/null +++ b/drivers/net/cxgb4vf/adapter.h @@ -0,0 +1,540 @@ +/* + * This file is part of the Chelsio T4 PCI-E SR-IOV Virtual Function Ethernet + * driver for Linux. + * + * Copyright (c) 2009-2010 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +/* + * This file should not be included directly. Include t4vf_common.h instead. + */ + +#ifndef __CXGB4VF_ADAPTER_H__ +#define __CXGB4VF_ADAPTER_H__ + +#include <linux/pci.h> +#include <linux/spinlock.h> +#include <linux/skbuff.h> +#include <linux/if_ether.h> +#include <linux/netdevice.h> + +#include "../cxgb4/t4_hw.h" + +/* + * Constants of the implementation. + */ +enum { + MAX_NPORTS = 1, /* max # of "ports" */ + MAX_PORT_QSETS = 8, /* max # of Queue Sets / "port" */ + MAX_ETH_QSETS = MAX_NPORTS*MAX_PORT_QSETS, + + /* + * MSI-X interrupt index usage. + */ + MSIX_FW = 0, /* MSI-X index for firmware Q */ + MSIX_NIQFLINT = 1, /* MSI-X index base for Ingress Qs */ + MSIX_EXTRAS = 1, + MSIX_ENTRIES = MAX_ETH_QSETS + MSIX_EXTRAS, + + /* + * The maximum number of Ingress and Egress Queues is determined by + * the maximum number of "Queue Sets" which we support plus any + * ancillary queues. Each "Queue Set" requires one Ingress Queue + * for RX Packet Ingress Event notifications and two Egress Queues for + * a Free List and an Ethernet TX list. + */ + INGQ_EXTRAS = 2, /* firmware event queue and */ + /* forwarded interrupts */ + MAX_INGQ = MAX_ETH_QSETS+INGQ_EXTRAS, + MAX_EGRQ = MAX_ETH_QSETS*2, +}; + +/* + * Forward structure definition references. + */ +struct adapter; +struct sge_eth_rxq; +struct sge_rspq; + +/* + * Per-"port" information. This is really per-Virtual Interface information + * but the use of the "port" nomanclature makes it easier to go back and forth + * between the PF and VF drivers ... + */ +struct port_info { + struct adapter *adapter; /* our adapter */ + struct vlan_group *vlan_grp; /* out VLAN group */ + u16 viid; /* virtual interface ID */ + s16 xact_addr_filt; /* index of our MAC address filter */ + u16 rss_size; /* size of VI's RSS table slice */ + u8 pidx; /* index into adapter port[] */ + u8 port_id; /* physical port ID */ + u8 rx_offload; /* CSO, etc. */ + u8 nqsets; /* # of "Queue Sets" */ + u8 first_qset; /* index of first "Queue Set" */ + struct link_config link_cfg; /* physical port configuration */ +}; + +/* port_info.rx_offload flags */ +enum { + RX_CSO = 1 << 0, +}; + +/* + * Scatter Gather Engine resources for the "adapter". Our ingress and egress + * queues are organized into "Queue Sets" with one ingress and one egress + * queue per Queue Set. These Queue Sets are aportionable between the "ports" + * (Virtual Interfaces). One extra ingress queue is used to receive + * asynchronous messages from the firmware. Note that the "Queue IDs" that we + * use here are really "Relative Queue IDs" which are returned as part of the + * firmware command to allocate queues. These queue IDs are relative to the + * absolute Queue ID base of the section of the Queue ID space allocated to + * the PF/VF. + */ + +/* + * SGE free-list queue state. + */ +struct rx_sw_desc; +struct sge_fl { + unsigned int avail; /* # of available RX buffers */ + unsigned int pend_cred; /* new buffers since last FL DB ring */ + unsigned int cidx; /* consumer index */ + unsigned int pidx; /* producer index */ + unsigned long alloc_failed; /* # of buffer allocation failures */ + unsigned long large_alloc_failed; + unsigned long starving; /* # of times FL was found starving */ + + /* + * Write-once/infrequently fields. + * ------------------------------- + */ + + unsigned int cntxt_id; /* SGE relative QID for the free list */ + unsigned int abs_id; /* SGE absolute QID for the free list */ + unsigned int size; /* capacity of free list */ + struct rx_sw_desc *sdesc; /* address of SW RX descriptor ring */ + __be64 *desc; /* address of HW RX descriptor ring */ + dma_addr_t addr; /* PCI bus address of hardware ring */ +}; + +/* + * An ingress packet gather list. + */ +struct pkt_gl { + skb_frag_t frags[MAX_SKB_FRAGS]; + void *va; /* virtual address of first byte */ + unsigned int nfrags; /* # of fragments */ + unsigned int tot_len; /* total length of fragments */ +}; + +typedef int (*rspq_handler_t)(struct sge_rspq *, const __be64 *, + const struct pkt_gl *); + +/* + * State for an SGE Response Queue. + */ +struct sge_rspq { + struct napi_struct napi; /* NAPI scheduling control */ + const __be64 *cur_desc; /* current descriptor in queue */ + unsigned int cidx; /* consumer index */ + u8 gen; /* current generation bit */ + u8 next_intr_params; /* holdoff params for next interrupt */ + int offset; /* offset into current FL buffer */ + + unsigned int unhandled_irqs; /* bogus interrupts */ + + /* + * Write-once/infrequently fields. + * ------------------------------- + */ + + u8 intr_params; /* interrupt holdoff parameters */ + u8 pktcnt_idx; /* interrupt packet threshold */ + u8 idx; /* queue index within its group */ + u16 cntxt_id; /* SGE rel QID for the response Q */ + u16 abs_id; /* SGE abs QID for the response Q */ + __be64 *desc; /* address of hardware response ring */ + dma_addr_t phys_addr; /* PCI bus address of ring */ + unsigned int iqe_len; /* entry size */ + unsigned int size; /* capcity of response Q */ + struct adapter *adapter; /* our adapter */ + struct net_device *netdev; /* associated net device */ + rspq_handler_t handler; /* the handler for this response Q */ +}; + +/* + * Ethernet queue statistics + */ +struct sge_eth_stats { + unsigned long pkts; /* # of ethernet packets */ + unsigned long lro_pkts; /* # of LRO super packets */ + unsigned long lro_merged; /* # of wire packets merged by LRO */ + unsigned long rx_cso; /* # of Rx checksum offloads */ + unsigned long vlan_ex; /* # of Rx VLAN extractions */ + unsigned long rx_drops; /* # of packets dropped due to no mem */ +}; + +/* + * State for an Ethernet Receive Queue. + */ +struct sge_eth_rxq { + struct sge_rspq rspq; /* Response Queue */ + struct sge_fl fl; /* Free List */ + struct sge_eth_stats stats; /* receive statistics */ +}; + +/* + * SGE Transmit Queue state. This contains all of the resources associated + * with the hardware status of a TX Queue which is a circular ring of hardware + * TX Descriptors. For convenience, it also contains a pointer to a parallel + * "Software Descriptor" array but we don't know anything about it here other + * than its type name. + */ +struct tx_desc { + /* + * Egress Queues are measured in units of SGE_EQ_IDXSIZE by the + * hardware: Sizes, Producer and Consumer indices, etc. + */ + __be64 flit[SGE_EQ_IDXSIZE/sizeof(__be64)]; +}; +struct tx_sw_desc; +struct sge_txq { + unsigned int in_use; /* # of in-use TX descriptors */ + unsigned int size; /* # of descriptors */ + unsigned int cidx; /* SW consumer index */ + unsigned int pidx; /* producer index */ + unsigned long stops; /* # of times queue has been stopped */ + unsigned long restarts; /* # of queue restarts */ + + /* + * Write-once/infrequently fields. + * ------------------------------- + */ + + unsigned int cntxt_id; /* SGE relative QID for the TX Q */ + unsigned int abs_id; /* SGE absolute QID for the TX Q */ + struct tx_desc *desc; /* address of HW TX descriptor ring */ + struct tx_sw_desc *sdesc; /* address of SW TX descriptor ring */ + struct sge_qstat *stat; /* queue status entry */ + dma_addr_t phys_addr; /* PCI bus address of hardware ring */ +}; + +/* + * State for an Ethernet Transmit Queue. + */ +struct sge_eth_txq { + struct sge_txq q; /* SGE TX Queue */ + struct netdev_queue *txq; /* associated netdev TX queue */ + unsigned long tso; /* # of TSO requests */ + unsigned long tx_cso; /* # of TX checksum offloads */ + unsigned long vlan_ins; /* # of TX VLAN insertions */ + unsigned long mapping_err; /* # of I/O MMU packet mapping errors */ +}; + +/* + * The complete set of Scatter/Gather Engine resources. + */ +struct sge { + /* + * Our "Queue Sets" ... + */ + struct sge_eth_txq ethtxq[MAX_ETH_QSETS]; + struct sge_eth_rxq ethrxq[MAX_ETH_QSETS]; + + /* + * Extra ingress queues for asynchronous firmware events and + * forwarded interrupts (when in MSI mode). + */ + struct sge_rspq fw_evtq ____cacheline_aligned_in_smp; + + struct sge_rspq intrq ____cacheline_aligned_in_smp; + spinlock_t intrq_lock; + + /* + * State for managing "starving Free Lists" -- Free Lists which have + * fallen below a certain threshold of buffers available to the + * hardware and attempts to refill them up to that threshold have + * failed. We have a regular "slow tick" timer process which will + * make periodic attempts to refill these starving Free Lists ... + */ + DECLARE_BITMAP(starving_fl, MAX_EGRQ); + struct timer_list rx_timer; + + /* + * State for cleaning up completed TX descriptors. + */ + struct timer_list tx_timer; + + /* + * Write-once/infrequently fields. + * ------------------------------- + */ + + u16 max_ethqsets; /* # of available Ethernet queue sets */ + u16 ethqsets; /* # of active Ethernet queue sets */ + u16 ethtxq_rover; /* Tx queue to clean up next */ + u16 timer_val[SGE_NTIMERS]; /* interrupt holdoff timer array */ + u8 counter_val[SGE_NCOUNTERS]; /* interrupt RX threshold array */ + + /* + * Reverse maps from Absolute Queue IDs to associated queue pointers. + * The absolute Queue IDs are in a compact range which start at a + * [potentially large] Base Queue ID. We perform the reverse map by + * first converting the Absolute Queue ID into a Relative Queue ID by + * subtracting off the Base Queue ID and then use a Relative Queue ID + * indexed table to get the pointer to the corresponding software + * queue structure. + */ + unsigned int egr_base; + unsigned int ingr_base; + void *egr_map[MAX_EGRQ]; + struct sge_rspq *ingr_map[MAX_INGQ]; +}; + +/* + * Utility macros to convert Absolute- to Relative-Queue indices and Egress- + * and Ingress-Queues. The EQ_MAP() and IQ_MAP() macros which provide + * pointers to Ingress- and Egress-Queues can be used as both L- and R-values + */ +#define EQ_IDX(s, abs_id) ((unsigned int)((abs_id) - (s)->egr_base)) +#define IQ_IDX(s, abs_id) ((unsigned int)((abs_id) - (s)->ingr_base)) + +#define EQ_MAP(s, abs_id) ((s)->egr_map[EQ_IDX(s, abs_id)]) +#define IQ_MAP(s, abs_id) ((s)->ingr_map[IQ_IDX(s, abs_id)]) + +/* + * Macro to iterate across Queue Sets ("rxq" is a historic misnomer). + */ +#define for_each_ethrxq(sge, iter) \ + for (iter = 0; iter < (sge)->ethqsets; iter++) + +/* + * Per-"adapter" (Virtual Function) information. + */ +struct adapter { + /* PCI resources */ + void __iomem *regs; + struct pci_dev *pdev; + struct device *pdev_dev; + + /* "adapter" resources */ + unsigned long registered_device_map; + unsigned long open_device_map; + unsigned long flags; + struct adapter_params params; + + /* queue and interrupt resources */ + struct { + unsigned short vec; + char desc[22]; + } msix_info[MSIX_ENTRIES]; + struct sge sge; + + /* Linux network device resources */ + struct net_device *port[MAX_NPORTS]; + const char *name; + unsigned int msg_enable; + + /* debugfs resources */ + struct dentry *debugfs_root; + + /* various locks */ + spinlock_t stats_lock; +}; + +enum { /* adapter flags */ + FULL_INIT_DONE = (1UL << 0), + USING_MSI = (1UL << 1), + USING_MSIX = (1UL << 2), + QUEUES_BOUND = (1UL << 3), +}; + +/* + * The following register read/write routine definitions are required by + * the common code. + */ + +/** + * t4_read_reg - read a HW register + * @adapter: the adapter + * @reg_addr: the register address + * + * Returns the 32-bit value of the given HW register. + */ +static inline u32 t4_read_reg(struct adapter *adapter, u32 reg_addr) +{ + return readl(adapter->regs + reg_addr); +} + +/** + * t4_write_reg - write a HW register + * @adapter: the adapter + * @reg_addr: the register address + * @val: the value to write + * + * Write a 32-bit value into the given HW register. + */ +static inline void t4_write_reg(struct adapter *adapter, u32 reg_addr, u32 val) +{ + writel(val, adapter->regs + reg_addr); +} + +#ifndef readq +static inline u64 readq(const volatile void __iomem *addr) +{ + return readl(addr) + ((u64)readl(addr + 4) << 32); +} + +static inline void writeq(u64 val, volatile void __iomem *addr) +{ + writel(val, addr); + writel(val >> 32, addr + 4); +} +#endif + +/** + * t4_read_reg64 - read a 64-bit HW register + * @adapter: the adapter + * @reg_addr: the register address + * + * Returns the 64-bit value of the given HW register. + */ +static inline u64 t4_read_reg64(struct adapter *adapter, u32 reg_addr) +{ + return readq(adapter->regs + reg_addr); +} + +/** + * t4_write_reg64 - write a 64-bit HW register + * @adapter: the adapter + * @reg_addr: the register address + * @val: the value to write + * + * Write a 64-bit value into the given HW register. + */ +static inline void t4_write_reg64(struct adapter *adapter, u32 reg_addr, + u64 val) +{ + writeq(val, adapter->regs + reg_addr); +} + +/** + * port_name - return the string name of a port + * @adapter: the adapter + * @pidx: the port index + * + * Return the string name of the selected port. + */ +static inline const char *port_name(struct adapter *adapter, int pidx) +{ + return adapter->port[pidx]->name; +} + +/** + * t4_os_set_hw_addr - store a port's MAC address in SW + * @adapter: the adapter + * @pidx: the port index + * @hw_addr: the Ethernet address + * + * Store the Ethernet address of the given port in SW. Called by the common + * code when it retrieves a port's Ethernet address from EEPROM. + */ +static inline void t4_os_set_hw_addr(struct adapter *adapter, int pidx, + u8 hw_addr[]) +{ + memcpy(adapter->port[pidx]->dev_addr, hw_addr, ETH_ALEN); + memcpy(adapter->port[pidx]->perm_addr, hw_addr, ETH_ALEN); +} + +/** + * netdev2pinfo - return the port_info structure associated with a net_device + * @dev: the netdev + * + * Return the struct port_info associated with a net_device + */ +static inline struct port_info *netdev2pinfo(const struct net_device *dev) +{ + return netdev_priv(dev); +} + +/** + * adap2pinfo - return the port_info of a port + * @adap: the adapter + * @pidx: the port index + * + * Return the port_info structure for the adapter. + */ +static inline struct port_info *adap2pinfo(struct adapter *adapter, int pidx) +{ + return netdev_priv(adapter->port[pidx]); +} + +/** + * netdev2adap - return the adapter structure associated with a net_device + * @dev: the netdev + * + * Return the struct adapter associated with a net_device + */ +static inline struct adapter *netdev2adap(const struct net_device *dev) +{ + return netdev2pinfo(dev)->adapter; +} + +/* + * OS "Callback" function declarations. These are functions that the OS code + * is "contracted" to provide for the common code. + */ +void t4vf_os_link_changed(struct adapter *, int, int); + +/* + * SGE function prototype declarations. + */ +int t4vf_sge_alloc_rxq(struct adapter *, struct sge_rspq *, bool, + struct net_device *, int, + struct sge_fl *, rspq_handler_t); +int t4vf_sge_alloc_eth_txq(struct adapter *, struct sge_eth_txq *, + struct net_device *, struct netdev_queue *, + unsigned int); +void t4vf_free_sge_resources(struct adapter *); + +int t4vf_eth_xmit(struct sk_buff *, struct net_device *); +int t4vf_ethrx_handler(struct sge_rspq *, const __be64 *, + const struct pkt_gl *); + +irq_handler_t t4vf_intr_handler(struct adapter *); +irqreturn_t t4vf_sge_intr_msix(int, void *); + +int t4vf_sge_init(struct adapter *); +void t4vf_sge_start(struct adapter *); +void t4vf_sge_stop(struct adapter *); + +#endif /* __CXGB4VF_ADAPTER_H__ */ diff --git a/drivers/net/cxgb4vf/cxgb4vf_main.c b/drivers/net/cxgb4vf/cxgb4vf_main.c new file mode 100644 index 00000000000..a16563219ac --- /dev/null +++ b/drivers/net/cxgb4vf/cxgb4vf_main.c @@ -0,0 +1,2888 @@ +/* + * This file is part of the Chelsio T4 PCI-E SR-IOV Virtual Function Ethernet + * driver for Linux. + * + * Copyright (c) 2009-2010 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include <linux/version.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/debugfs.h> +#include <linux/ethtool.h> + +#include "t4vf_common.h" +#include "t4vf_defs.h" + +#include "../cxgb4/t4_regs.h" +#include "../cxgb4/t4_msg.h" + +/* + * Generic information about the driver. + */ +#define DRV_VERSION "1.0.0" +#define DRV_DESC "Chelsio T4 Virtual Function (VF) Network Driver" + +/* + * Module Parameters. + * ================== + */ + +/* + * Default ethtool "message level" for adapters. + */ +#define DFLT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | \ + NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP |\ + NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR) + +static int dflt_msg_enable = DFLT_MSG_ENABLE; + +module_param(dflt_msg_enable, int, 0644); +MODULE_PARM_DESC(dflt_msg_enable, + "default adapter ethtool message level bitmap"); + +/* + * The driver uses the best interrupt scheme available on a platform in the + * order MSI-X then MSI. This parameter determines which of these schemes the + * driver may consider as follows: + * + * msi = 2: choose from among MSI-X and MSI + * msi = 1: only consider MSI interrupts + * + * Note that unlike the Physical Function driver, this Virtual Function driver + * does _not_ support legacy INTx interrupts (this limitation is mandated by + * the PCI-E SR-IOV standard). + */ +#define MSI_MSIX 2 +#define MSI_MSI 1 +#define MSI_DEFAULT MSI_MSIX + +static int msi = MSI_DEFAULT; + +module_param(msi, int, 0644); +MODULE_PARM_DESC(msi, "whether to use MSI-X or MSI"); + +/* + * Fundamental constants. + * ====================== + */ + +enum { + MAX_TXQ_ENTRIES = 16384, + MAX_RSPQ_ENTRIES = 16384, + MAX_RX_BUFFERS = 16384, + + MIN_TXQ_ENTRIES = 32, + MIN_RSPQ_ENTRIES = 128, + MIN_FL_ENTRIES = 16, + + /* + * For purposes of manipulating the Free List size we need to + * recognize that Free Lists are actually Egress Queues (the host + * produces free buffers which the hardware consumes), Egress Queues + * indices are all in units of Egress Context Units bytes, and free + * list entries are 64-bit PCI DMA addresses. And since the state of + * the Producer Index == the Consumer Index implies an EMPTY list, we + * always have at least one Egress Unit's worth of Free List entries + * unused. See sge.c for more details ... + */ + EQ_UNIT = SGE_EQ_IDXSIZE, + FL_PER_EQ_UNIT = EQ_UNIT / sizeof(__be64), + MIN_FL_RESID = FL_PER_EQ_UNIT, +}; + +/* + * Global driver state. + * ==================== + */ + +static struct dentry *cxgb4vf_debugfs_root; + +/* + * OS "Callback" functions. + * ======================== + */ + +/* + * The link status has changed on the indicated "port" (Virtual Interface). + */ +void t4vf_os_link_changed(struct adapter *adapter, int pidx, int link_ok) +{ + struct net_device *dev = adapter->port[pidx]; + + /* + * If the port is disabled or the current recorded "link up" + * status matches the new status, just return. + */ + if (!netif_running(dev) || link_ok == netif_carrier_ok(dev)) + return; + + /* + * Tell the OS that the link status has changed and print a short + * informative message on the console about the event. + */ + if (link_ok) { + const char *s; + const char *fc; + const struct port_info *pi = netdev_priv(dev); + + netif_carrier_on(dev); + + switch (pi->link_cfg.speed) { + case SPEED_10000: + s = "10Gbps"; + break; + + case SPEED_1000: + s = "1000Mbps"; + break; + + case SPEED_100: + s = "100Mbps"; + break; + + default: + s = "unknown"; + break; + } + + switch (pi->link_cfg.fc) { + case PAUSE_RX: + fc = "RX"; + break; + + case PAUSE_TX: + fc = "TX"; + break; + + case PAUSE_RX|PAUSE_TX: + fc = "RX/TX"; + break; + + default: + fc = "no"; + break; + } + + printk(KERN_INFO "%s: link up, %s, full-duplex, %s PAUSE\n", + dev->name, s, fc); + } else { + netif_carrier_off(dev); + printk(KERN_INFO "%s: link down\n", dev->name); + } +} + +/* + * Net device operations. + * ====================== + */ + +/* + * Record our new VLAN Group and enable/disable hardware VLAN Tag extraction + * based on whether the specified VLAN Group pointer is NULL or not. + */ +static void cxgb4vf_vlan_rx_register(struct net_device *dev, + struct vlan_group *grp) +{ + struct port_info *pi = netdev_priv(dev); + + pi->vlan_grp = grp; + t4vf_set_rxmode(pi->adapter, pi->viid, -1, -1, -1, -1, grp != NULL, 0); +} + +/* + * Perform the MAC and PHY actions needed to enable a "port" (Virtual + * Interface). + */ +static int link_start(struct net_device *dev) +{ + int ret; + struct port_info *pi = netdev_priv(dev); + + /* + * We do not set address filters and promiscuity here, the stack does + * that step explicitly. + */ + ret = t4vf_set_rxmode(pi->adapter, pi->viid, dev->mtu, -1, -1, -1, -1, + true); + if (ret == 0) { + ret = t4vf_change_mac(pi->adapter, pi->viid, + pi->xact_addr_filt, dev->dev_addr, true); + if (ret >= 0) { + pi->xact_addr_filt = ret; + ret = 0; + } + } + + /* + * We don't need to actually "start the link" itself since the + * firmware will do that for us when the first Virtual Interface + * is enabled on a port. + */ + if (ret == 0) + ret = t4vf_enable_vi(pi->adapter, pi->viid, true, true); + return ret; +} + +/* + * Name the MSI-X interrupts. + */ +static void name_msix_vecs(struct adapter *adapter) +{ + int namelen = sizeof(adapter->msix_info[0].desc) - 1; + int pidx; + + /* + * Firmware events. + */ + snprintf(adapter->msix_info[MSIX_FW].desc, namelen, + "%s-FWeventq", adapter->name); + adapter->msix_info[MSIX_FW].desc[namelen] = 0; + + /* + * Ethernet queues. + */ + for_each_port(adapter, pidx) { + struct net_device *dev = adapter->port[pidx]; + const struct port_info *pi = netdev_priv(dev); + int qs, msi; + + for (qs = 0, msi = MSIX_NIQFLINT; + qs < pi->nqsets; + qs++, msi++) { + snprintf(adapter->msix_info[msi].desc, namelen, + "%s-%d", dev->name, qs); + adapter->msix_info[msi].desc[namelen] = 0; + } + } +} + +/* + * Request all of our MSI-X resources. + */ +static int request_msix_queue_irqs(struct adapter *adapter) +{ + struct sge *s = &adapter->sge; + int rxq, msi, err; + + /* + * Firmware events. + */ + err = request_irq(adapter->msix_info[MSIX_FW].vec, t4vf_sge_intr_msix, + 0, adapter->msix_info[MSIX_FW].desc, &s->fw_evtq); + if (err) + return err; + + /* + * Ethernet queues. + */ + msi = MSIX_NIQFLINT; + for_each_ethrxq(s, rxq) { + err = request_irq(adapter->msix_info[msi].vec, + t4vf_sge_intr_msix, 0, + adapter->msix_info[msi].desc, + &s->ethrxq[rxq].rspq); + if (err) + goto err_free_irqs; + msi++; + } + return 0; + +err_free_irqs: + while (--rxq >= 0) + free_irq(adapter->msix_info[--msi].vec, &s->ethrxq[rxq].rspq); + free_irq(adapter->msix_info[MSIX_FW].vec, &s->fw_evtq); + return err; +} + +/* + * Free our MSI-X resources. + */ +static void free_msix_queue_irqs(struct adapter *adapter) +{ + struct sge *s = &adapter->sge; + int rxq, msi; + + free_irq(adapter->msix_info[MSIX_FW].vec, &s->fw_evtq); + msi = MSIX_NIQFLINT; + for_each_ethrxq(s, rxq) + free_irq(adapter->msix_info[msi++].vec, + &s->ethrxq[rxq].rspq); +} + +/* + * Turn on NAPI and start up interrupts on a response queue. + */ +static void qenable(struct sge_rspq *rspq) +{ + napi_enable(&rspq->napi); + + /* + * 0-increment the Going To Sleep register to start the timer and + * enable interrupts. + */ + t4_write_reg(rspq->adapter, T4VF_SGE_BASE_ADDR + SGE_VF_GTS, + CIDXINC(0) | + SEINTARM(rspq->intr_params) | + INGRESSQID(rspq->cntxt_id)); +} + +/* + * Enable NAPI scheduling and interrupt generation for all Receive Queues. + */ +static void enable_rx(struct adapter *adapter) +{ + int rxq; + struct sge *s = &adapter->sge; + + for_each_ethrxq(s, rxq) + qenable(&s->ethrxq[rxq].rspq); + qenable(&s->fw_evtq); + + /* + * The interrupt queue doesn't use NAPI so we do the 0-increment of + * its Going To Sleep register here to get it started. + */ + if (adapter->flags & USING_MSI) + t4_write_reg(adapter, T4VF_SGE_BASE_ADDR + SGE_VF_GTS, + CIDXINC(0) | + SEINTARM(s->intrq.intr_params) | + INGRESSQID(s->intrq.cntxt_id)); + +} + +/* + * Wait until all NAPI handlers are descheduled. + */ +static void quiesce_rx(struct adapter *adapter) +{ + struct sge *s = &adapter->sge; + int rxq; + + for_each_ethrxq(s, rxq) + napi_disable(&s->ethrxq[rxq].rspq.napi); + napi_disable(&s->fw_evtq.napi); +} + +/* + * Response queue handler for the firmware event queue. + */ +static int fwevtq_handler(struct sge_rspq *rspq, const __be64 *rsp, + const struct pkt_gl *gl) +{ + /* + * Extract response opcode and get pointer to CPL message body. + */ + struct adapter *adapter = rspq->adapter; + u8 opcode = ((const struct rss_header *)rsp)->opcode; + void *cpl = (void *)(rsp + 1); + + switch (opcode) { + case CPL_FW6_MSG: { + /* + * We've received an asynchronous message from the firmware. + */ + const struct cpl_fw6_msg *fw_msg = cpl; + if (fw_msg->type == FW6_TYPE_CMD_RPL) + t4vf_handle_fw_rpl(adapter, fw_msg->data); + break; + } + + case CPL_SGE_EGR_UPDATE: { + /* + * We've received an Egress Queue Status Update message. We + * get these, if the SGE is configured to send these when the + * firmware passes certain points in processing our TX + * Ethernet Queue or if we make an explicit request for one. + * We use these updates to determine when we may need to + * restart a TX Ethernet Queue which was stopped for lack of + * free TX Queue Descriptors ... + */ + const struct cpl_sge_egr_update *p = (void *)cpl; + unsigned int qid = EGR_QID(be32_to_cpu(p->opcode_qid)); + struct sge *s = &adapter->sge; + struct sge_txq *tq; + struct sge_eth_txq *txq; + unsigned int eq_idx; + + /* + * Perform sanity checking on the Queue ID to make sure it + * really refers to one of our TX Ethernet Egress Queues which + * is active and matches the queue's ID. None of these error + * conditions should ever happen so we may want to either make + * them fatal and/or conditionalized under DEBUG. + */ + eq_idx = EQ_IDX(s, qid); + if (unlikely(eq_idx >= MAX_EGRQ)) { + dev_err(adapter->pdev_dev, + "Egress Update QID %d out of range\n", qid); + break; + } + tq = s->egr_map[eq_idx]; + if (unlikely(tq == NULL)) { + dev_err(adapter->pdev_dev, + "Egress Update QID %d TXQ=NULL\n", qid); + break; + } + txq = container_of(tq, struct sge_eth_txq, q); + if (unlikely(tq->abs_id != qid)) { + dev_err(adapter->pdev_dev, + "Egress Update QID %d refers to TXQ %d\n", + qid, tq->abs_id); + break; + } + + /* + * Restart a stopped TX Queue which has less than half of its + * TX ring in use ... + */ + txq->q.restarts++; + netif_tx_wake_queue(txq->txq); + break; + } + + default: + dev_err(adapter->pdev_dev, + "unexpected CPL %#x on FW event queue\n", opcode); + } + + return 0; +} + +/* + * Allocate SGE TX/RX response queues. Determine how many sets of SGE queues + * to use and initializes them. We support multiple "Queue Sets" per port if + * we have MSI-X, otherwise just one queue set per port. + */ +static int setup_sge_queues(struct adapter *adapter) +{ + struct sge *s = &adapter->sge; + int err, pidx, msix; + + /* + * Clear "Queue Set" Free List Starving and TX Queue Mapping Error + * state. + */ + bitmap_zero(s->starving_fl, MAX_EGRQ); + + /* + * If we're using MSI interrupt mode we need to set up a "forwarded + * interrupt" queue which we'll set up with our MSI vector. The rest + * of the ingress queues will be set up to forward their interrupts to + * this queue ... This must be first since t4vf_sge_alloc_rxq() uses + * the intrq's queue ID as the interrupt forwarding queue for the + * subsequent calls ... + */ + if (adapter->flags & USING_MSI) { + err = t4vf_sge_alloc_rxq(adapter, &s->intrq, false, + adapter->port[0], 0, NULL, NULL); + if (err) + goto err_free_queues; + } + + /* + * Allocate our ingress queue for asynchronous firmware messages. + */ + err = t4vf_sge_alloc_rxq(adapter, &s->fw_evtq, true, adapter->port[0], + MSIX_FW, NULL, fwevtq_handler); + if (err) + goto err_free_queues; + + /* + * Allocate each "port"'s initial Queue Sets. These can be changed + * later on ... up to the point where any interface on the adapter is + * brought up at which point lots of things get nailed down + * permanently ... + */ + msix = MSIX_NIQFLINT; + for_each_port(adapter, pidx) { + struct net_device *dev = adapter->port[pidx]; + struct port_info *pi = netdev_priv(dev); + struct sge_eth_rxq *rxq = &s->ethrxq[pi->first_qset]; + struct sge_eth_txq *txq = &s->ethtxq[pi->first_qset]; + int qs; + + for (qs = 0; qs < pi->nqsets; qs++, rxq++, txq++) { + err = t4vf_sge_alloc_rxq(adapter, &rxq->rspq, false, + dev, msix++, + &rxq->fl, t4vf_ethrx_handler); + if (err) + goto err_free_queues; + + err = t4vf_sge_alloc_eth_txq(adapter, txq, dev, + netdev_get_tx_queue(dev, qs), + s->fw_evtq.cntxt_id); + if (err) + goto err_free_queues; + + rxq->rspq.idx = qs; + memset(&rxq->stats, 0, sizeof(rxq->stats)); + } + } + + /* + * Create the reverse mappings for the queues. + */ + s->egr_base = s->ethtxq[0].q.abs_id - s->ethtxq[0].q.cntxt_id; + s->ingr_base = s->ethrxq[0].rspq.abs_id - s->ethrxq[0].rspq.cntxt_id; + IQ_MAP(s, s->fw_evtq.abs_id) = &s->fw_evtq; + for_each_port(adapter, pidx) { + struct net_device *dev = adapter->port[pidx]; + struct port_info *pi = netdev_priv(dev); + struct sge_eth_rxq *rxq = &s->ethrxq[pi->first_qset]; + struct sge_eth_txq *txq = &s->ethtxq[pi->first_qset]; + int qs; + + for (qs = 0; qs < pi->nqsets; qs++, rxq++, txq++) { + IQ_MAP(s, rxq->rspq.abs_id) = &rxq->rspq; + EQ_MAP(s, txq->q.abs_id) = &txq->q; + + /* + * The FW_IQ_CMD doesn't return the Absolute Queue IDs + * for Free Lists but since all of the Egress Queues + * (including Free Lists) have Relative Queue IDs + * which are computed as Absolute - Base Queue ID, we + * can synthesize the Absolute Queue IDs for the Free + * Lists. This is useful for debugging purposes when + * we want to dump Queue Contexts via the PF Driver. + */ + rxq->fl.abs_id = rxq->fl.cntxt_id + s->egr_base; + EQ_MAP(s, rxq->fl.abs_id) = &rxq->fl; + } + } + return 0; + +err_free_queues: + t4vf_free_sge_resources(adapter); + return err; +} + +/* + * Set up Receive Side Scaling (RSS) to distribute packets to multiple receive + * queues. We configure the RSS CPU lookup table to distribute to the number + * of HW receive queues, and the response queue lookup table to narrow that + * down to the response queues actually configured for each "port" (Virtual + * Interface). We always configure the RSS mapping for all ports since the + * mapping table has plenty of entries. + */ +static int setup_rss(struct adapter *adapter) +{ + int pidx; + + for_each_port(adapter, pidx) { + struct port_info *pi = adap2pinfo(adapter, pidx); + struct sge_eth_rxq *rxq = &adapter->sge.ethrxq[pi->first_qset]; + u16 rss[MAX_PORT_QSETS]; + int qs, err; + + for (qs = 0; qs < pi->nqsets; qs++) + rss[qs] = rxq[qs].rspq.abs_id; + + err = t4vf_config_rss_range(adapter, pi->viid, + 0, pi->rss_size, rss, pi->nqsets); + if (err) + return err; + + /* + * Perform Global RSS Mode-specific initialization. + */ + switch (adapter->params.rss.mode) { + case FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL: + /* + * If Tunnel All Lookup isn't specified in the global + * RSS Configuration, then we need to specify a + * default Ingress Queue for any ingress packets which + * aren't hashed. We'll use our first ingress queue + * ... + */ + if (!adapter->params.rss.u.basicvirtual.tnlalllookup) { + union rss_vi_config config; + err = t4vf_read_rss_vi_config(adapter, + pi->viid, + &config); + if (err) + return err; + config.basicvirtual.defaultq = + rxq[0].rspq.abs_id; + err = t4vf_write_rss_vi_config(adapter, + pi->viid, + &config); + if (err) + return err; + } + break; + } + } + + return 0; +} + +/* + * Bring the adapter up. Called whenever we go from no "ports" open to having + * one open. This function performs the actions necessary to make an adapter + * operational, such as completing the initialization of HW modules, and + * enabling interrupts. Must be called with the rtnl lock held. (Note that + * this is called "cxgb_up" in the PF Driver.) + */ +static int adapter_up(struct adapter *adapter) +{ + int err; + + /* + * If this is the first time we've been called, perform basic + * adapter setup. Once we've done this, many of our adapter + * parameters can no longer be changed ... + */ + if ((adapter->flags & FULL_INIT_DONE) == 0) { + err = setup_sge_queues(adapter); + if (err) + return err; + err = setup_rss(adapter); + if (err) { + t4vf_free_sge_resources(adapter); + return err; + } + + if (adapter->flags & USING_MSIX) + name_msix_vecs(adapter); + adapter->flags |= FULL_INIT_DONE; + } + + /* + * Acquire our interrupt resources. We only support MSI-X and MSI. + */ + BUG_ON((adapter->flags & (USING_MSIX|USING_MSI)) == 0); + if (adapter->flags & USING_MSIX) + err = request_msix_queue_irqs(adapter); + else + err = request_irq(adapter->pdev->irq, + t4vf_intr_handler(adapter), 0, + adapter->name, adapter); + if (err) { + dev_err(adapter->pdev_dev, "request_irq failed, err %d\n", + err); + return err; + } + + /* + * Enable NAPI ingress processing and return success. + */ + enable_rx(adapter); + t4vf_sge_start(adapter); + return 0; +} + +/* + * Bring the adapter down. Called whenever the last "port" (Virtual + * Interface) closed. (Note that this routine is called "cxgb_down" in the PF + * Driver.) + */ +static void adapter_down(struct adapter *adapter) +{ + /* + * Free interrupt resources. + */ + if (adapter->flags & USING_MSIX) + free_msix_queue_irqs(adapter); + else + free_irq(adapter->pdev->irq, adapter); + + /* + * Wait for NAPI handlers to finish. + */ + quiesce_rx(adapter); +} + +/* + * Start up a net device. + */ +static int cxgb4vf_open(struct net_device *dev) +{ + int err; + struct port_info *pi = netdev_priv(dev); + struct adapter *adapter = pi->adapter; + + /* + * If this is the first interface that we're opening on the "adapter", + * bring the "adapter" up now. + */ + if (adapter->open_device_map == 0) { + err = adapter_up(adapter); + if (err) + return err; + } + + /* + * Note that this interface is up and start everything up ... + */ + dev->real_num_tx_queues = pi->nqsets; + set_bit(pi->port_id, &adapter->open_device_map); + link_start(dev); + netif_tx_start_all_queues(dev); + return 0; +} + +/* + * Shut down a net device. This routine is called "cxgb_close" in the PF + * Driver ... + */ +static int cxgb4vf_stop(struct net_device *dev) +{ + int ret; + struct port_info *pi = netdev_priv(dev); + struct adapter *adapter = pi->adapter; + + netif_tx_stop_all_queues(dev); + netif_carrier_off(dev); + ret = t4vf_enable_vi(adapter, pi->viid, false, false); + pi->link_cfg.link_ok = 0; + + clear_bit(pi->port_id, &adapter->open_device_map); + if (adapter->open_device_map == 0) + adapter_down(adapter); + return 0; +} + +/* + * Translate our basic statistics into the standard "ifconfig" statistics. + */ +static struct net_device_stats *cxgb4vf_get_stats(struct net_device *dev) +{ + struct t4vf_port_stats stats; + struct port_info *pi = netdev2pinfo(dev); + struct adapter *adapter = pi->adapter; + struct net_device_stats *ns = &dev->stats; + int err; + + spin_lock(&adapter->stats_lock); + err = t4vf_get_port_stats(adapter, pi->pidx, &stats); + spin_unlock(&adapter->stats_lock); + + memset(ns, 0, sizeof(*ns)); + if (err) + return ns; + + ns->tx_bytes = (stats.tx_bcast_bytes + stats.tx_mcast_bytes + + stats.tx_ucast_bytes + stats.tx_offload_bytes); + ns->tx_packets = (stats.tx_bcast_frames + stats.tx_mcast_frames + + stats.tx_ucast_frames + stats.tx_offload_frames); + ns->rx_bytes = (stats.rx_bcast_bytes + stats.rx_mcast_bytes + + stats.rx_ucast_bytes); + ns->rx_packets = (stats.rx_bcast_frames + stats.rx_mcast_frames + + stats.rx_ucast_frames); + ns->multicast = stats.rx_mcast_frames; + ns->tx_errors = stats.tx_drop_frames; + ns->rx_errors = stats.rx_err_frames; + + return ns; +} + +/* + * Collect up to maxaddrs worth of a netdevice's unicast addresses into an + * array of addrss pointers and return the number collected. + */ +static inline int collect_netdev_uc_list_addrs(const struct net_device *dev, + const u8 **addr, + unsigned int maxaddrs) +{ + unsigned int naddr = 0; + const struct netdev_hw_addr *ha; + + for_each_dev_addr(dev, ha) { + addr[naddr++] = ha->addr; + if (naddr >= maxaddrs) + break; + } + return naddr; +} + +/* + * Collect up to maxaddrs worth of a netdevice's multicast addresses into an + * array of addrss pointers and return the number collected. + */ +static inline int collect_netdev_mc_list_addrs(const struct net_device *dev, + const u8 **addr, + unsigned int maxaddrs) +{ + unsigned int naddr = 0; + const struct netdev_hw_addr *ha; + + netdev_for_each_mc_addr(ha, dev) { + addr[naddr++] = ha->addr; + if (naddr >= maxaddrs) + break; + } + return naddr; +} + +/* + * Configure the exact and hash address filters to handle a port's multicast + * and secondary unicast MAC addresses. + */ +static int set_addr_filters(const struct net_device *dev, bool sleep) +{ + u64 mhash = 0; + u64 uhash = 0; + bool free = true; + u16 filt_idx[7]; + const u8 *addr[7]; + int ret, naddr = 0; + const struct port_info *pi = netdev_priv(dev); + + /* first do the secondary unicast addresses */ + naddr = collect_netdev_uc_list_addrs(dev, addr, ARRAY_SIZE(addr)); + if (naddr > 0) { + ret = t4vf_alloc_mac_filt(pi->adapter, pi->viid, free, + naddr, addr, filt_idx, &uhash, sleep); + if (ret < 0) + return ret; + + free = false; + } + + /* next set up the multicast addresses */ + naddr = collect_netdev_mc_list_addrs(dev, addr, ARRAY_SIZE(addr)); + if (naddr > 0) { + ret = t4vf_alloc_mac_filt(pi->adapter, pi->viid, free, + naddr, addr, filt_idx, &mhash, sleep); + if (ret < 0) + return ret; + } + + return t4vf_set_addr_hash(pi->adapter, pi->viid, uhash != 0, + uhash | mhash, sleep); +} + +/* + * Set RX properties of a port, such as promiscruity, address filters, and MTU. + * If @mtu is -1 it is left unchanged. + */ +static int set_rxmode(struct net_device *dev, int mtu, bool sleep_ok) +{ + int ret; + struct port_info *pi = netdev_priv(dev); + + ret = set_addr_filters(dev, sleep_ok); + if (ret == 0) + ret = t4vf_set_rxmode(pi->adapter, pi->viid, -1, + (dev->flags & IFF_PROMISC) != 0, + (dev->flags & IFF_ALLMULTI) != 0, + 1, -1, sleep_ok); + return ret; +} + +/* + * Set the current receive modes on the device. + */ +static void cxgb4vf_set_rxmode(struct net_device *dev) +{ + /* unfortunately we can't return errors to the stack */ + set_rxmode(dev, -1, false); +} + +/* + * Find the entry in the interrupt holdoff timer value array which comes + * closest to the specified interrupt holdoff value. + */ +static int closest_timer(const struct sge *s, int us) +{ + int i, timer_idx = 0, min_delta = INT_MAX; + + for (i = 0; i < ARRAY_SIZE(s->timer_val); i++) { + int delta = us - s->timer_val[i]; + if (delta < 0) + delta = -delta; + if (delta < min_delta) { + min_delta = delta; + timer_idx = i; + } + } + return timer_idx; +} + +static int closest_thres(const struct sge *s, int thres) +{ + int i, delta, pktcnt_idx = 0, min_delta = INT_MAX; + + for (i = 0; i < ARRAY_SIZE(s->counter_val); i++) { + delta = thres - s->counter_val[i]; + if (delta < 0) + delta = -delta; + if (delta < min_delta) { + min_delta = delta; + pktcnt_idx = i; + } + } + return pktcnt_idx; +} + +/* + * Return a queue's interrupt hold-off time in us. 0 means no timer. + */ +static unsigned int qtimer_val(const struct adapter *adapter, + const struct sge_rspq *rspq) +{ + unsigned int timer_idx = QINTR_TIMER_IDX_GET(rspq->intr_params); + + return timer_idx < SGE_NTIMERS + ? adapter->sge.timer_val[timer_idx] + : 0; +} + +/** + * set_rxq_intr_params - set a queue's interrupt holdoff parameters + * @adapter: the adapter + * @rspq: the RX response queue + * @us: the hold-off time in us, or 0 to disable timer + * @cnt: the hold-off packet count, or 0 to disable counter + * + * Sets an RX response queue's interrupt hold-off time and packet count. + * At least one of the two needs to be enabled for the queue to generate + * interrupts. + */ +static int set_rxq_intr_params(struct adapter *adapter, struct sge_rspq *rspq, + unsigned int us, unsigned int cnt) +{ + unsigned int timer_idx; + + /* + * If both the interrupt holdoff timer and count are specified as + * zero, default to a holdoff count of 1 ... + */ + if ((us | cnt) == 0) + cnt = 1; + + /* + * If an interrupt holdoff count has been specified, then find the + * closest configured holdoff count and use that. If the response + * queue has already been created, then update its queue context + * parameters ... + */ + if (cnt) { + int err; + u32 v, pktcnt_idx; + + pktcnt_idx = closest_thres(&adapter->sge, cnt); + if (rspq->desc && rspq->pktcnt_idx != pktcnt_idx) { + v = FW_PARAMS_MNEM(FW_PARAMS_MNEM_DMAQ) | + FW_PARAMS_PARAM_X( + FW_PARAMS_PARAM_DMAQ_IQ_INTCNTTHRESH) | + FW_PARAMS_PARAM_YZ(rspq->cntxt_id); + err = t4vf_set_params(adapter, 1, &v, &pktcnt_idx); + if (err) + return err; + } + rspq->pktcnt_idx = pktcnt_idx; + } + + /* + * Compute the closest holdoff timer index from the supplied holdoff + * timer value. + */ + timer_idx = (us == 0 + ? SGE_TIMER_RSTRT_CNTR + : closest_timer(&adapter->sge, us)); + + /* + * Update the response queue's interrupt coalescing parameters and + * return success. + */ + rspq->intr_params = (QINTR_TIMER_IDX(timer_idx) | + (cnt > 0 ? QINTR_CNT_EN : 0)); + return 0; +} + +/* + * Return a version number to identify the type of adapter. The scheme is: + * - bits 0..9: chip version + * - bits 10..15: chip revision + */ +static inline unsigned int mk_adap_vers(const struct adapter *adapter) +{ + /* + * Chip version 4, revision 0x3f (cxgb4vf). + */ + return 4 | (0x3f << 10); +} + +/* + * Execute the specified ioctl command. + */ +static int cxgb4vf_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + int ret = 0; + + switch (cmd) { + /* + * The VF Driver doesn't have access to any of the other + * common Ethernet device ioctl()'s (like reading/writing + * PHY registers, etc. + */ + + default: + ret = -EOPNOTSUPP; + break; + } + return ret; +} + +/* + * Change the device's MTU. + */ +static int cxgb4vf_change_mtu(struct net_device *dev, int new_mtu) +{ + int ret; + struct port_info *pi = netdev_priv(dev); + + /* accommodate SACK */ + if (new_mtu < 81) + return -EINVAL; + + ret = t4vf_set_rxmode(pi->adapter, pi->viid, new_mtu, + -1, -1, -1, -1, true); + if (!ret) + dev->mtu = new_mtu; + return ret; +} + +/* + * Change the devices MAC address. + */ +static int cxgb4vf_set_mac_addr(struct net_device *dev, void *_addr) +{ + int ret; + struct sockaddr *addr = _addr; + struct port_info *pi = netdev_priv(dev); + + if (!is_valid_ether_addr(addr->sa_data)) + return -EINVAL; + + ret = t4vf_change_mac(pi->adapter, pi->viid, pi->xact_addr_filt, + addr->sa_data, true); + if (ret < 0) + return ret; + + memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); + pi->xact_addr_filt = ret; + return 0; +} + +/* + * Return a TX Queue on which to send the specified skb. + */ +static u16 cxgb4vf_select_queue(struct net_device *dev, struct sk_buff *skb) +{ + /* + * XXX For now just use the default hash but we probably want to + * XXX look at other possibilities ... + */ + return skb_tx_hash(dev, skb); +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* + * Poll all of our receive queues. This is called outside of normal interrupt + * context. + */ +static void cxgb4vf_poll_controller(struct net_device *dev) +{ + struct port_info *pi = netdev_priv(dev); + struct adapter *adapter = pi->adapter; + + if (adapter->flags & USING_MSIX) { + struct sge_eth_rxq *rxq; + int nqsets; + + rxq = &adapter->sge.ethrxq[pi->first_qset]; + for (nqsets = pi->nqsets; nqsets; nqsets--) { + t4vf_sge_intr_msix(0, &rxq->rspq); + rxq++; + } + } else + t4vf_intr_handler(adapter)(0, adapter); +} +#endif + +/* + * Ethtool operations. + * =================== + * + * Note that we don't support any ethtool operations which change the physical + * state of the port to which we're linked. + */ + +/* + * Return current port link settings. + */ +static int cxgb4vf_get_settings(struct net_device *dev, + struct ethtool_cmd *cmd) +{ + const struct port_info *pi = netdev_priv(dev); + + cmd->supported = pi->link_cfg.supported; + cmd->advertising = pi->link_cfg.advertising; + cmd->speed = netif_carrier_ok(dev) ? pi->link_cfg.speed : -1; + cmd->duplex = DUPLEX_FULL; + + cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE; + cmd->phy_address = pi->port_id; + cmd->transceiver = XCVR_EXTERNAL; + cmd->autoneg = pi->link_cfg.autoneg; + cmd->maxtxpkt = 0; + cmd->maxrxpkt = 0; + return 0; +} + +/* + * Return our driver information. + */ +static void cxgb4vf_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *drvinfo) +{ + struct adapter *adapter = netdev2adap(dev); + + strcpy(drvinfo->driver, KBUILD_MODNAME); + strcpy(drvinfo->version, DRV_VERSION); + strcpy(drvinfo->bus_info, pci_name(to_pci_dev(dev->dev.parent))); + snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version), + "%u.%u.%u.%u, TP %u.%u.%u.%u", + FW_HDR_FW_VER_MAJOR_GET(adapter->params.dev.fwrev), + FW_HDR_FW_VER_MINOR_GET(adapter->params.dev.fwrev), + FW_HDR_FW_VER_MICRO_GET(adapter->params.dev.fwrev), + FW_HDR_FW_VER_BUILD_GET(adapter->params.dev.fwrev), + FW_HDR_FW_VER_MAJOR_GET(adapter->params.dev.tprev), + FW_HDR_FW_VER_MINOR_GET(adapter->params.dev.tprev), + FW_HDR_FW_VER_MICRO_GET(adapter->params.dev.tprev), + FW_HDR_FW_VER_BUILD_GET(adapter->params.dev.tprev)); +} + +/* + * Return current adapter message level. + */ +static u32 cxgb4vf_get_msglevel(struct net_device *dev) +{ + return netdev2adap(dev)->msg_enable; +} + +/* + * Set current adapter message level. + */ +static void cxgb4vf_set_msglevel(struct net_device *dev, u32 msglevel) +{ + netdev2adap(dev)->msg_enable = msglevel; +} + +/* + * Return the device's current Queue Set ring size parameters along with the + * allowed maximum values. Since ethtool doesn't understand the concept of + * multi-queue devices, we just return the current values associated with the + * first Queue Set. + */ +static void cxgb4vf_get_ringparam(struct net_device *dev, + struct ethtool_ringparam *rp) +{ + const struct port_info *pi = netdev_priv(dev); + const struct sge *s = &pi->adapter->sge; + + rp->rx_max_pending = MAX_RX_BUFFERS; + rp->rx_mini_max_pending = MAX_RSPQ_ENTRIES; + rp->rx_jumbo_max_pending = 0; + rp->tx_max_pending = MAX_TXQ_ENTRIES; + + rp->rx_pending = s->ethrxq[pi->first_qset].fl.size - MIN_FL_RESID; + rp->rx_mini_pending = s->ethrxq[pi->first_qset].rspq.size; + rp->rx_jumbo_pending = 0; + rp->tx_pending = s->ethtxq[pi->first_qset].q.size; +} + +/* + * Set the Queue Set ring size parameters for the device. Again, since + * ethtool doesn't allow for the concept of multiple queues per device, we'll + * apply these new values across all of the Queue Sets associated with the + * device -- after vetting them of course! + */ +static int cxgb4vf_set_ringparam(struct net_device *dev, + struct ethtool_ringparam *rp) +{ + const struct port_info *pi = netdev_priv(dev); + struct adapter *adapter = pi->adapter; + struct sge *s = &adapter->sge; + int qs; + + if (rp->rx_pending > MAX_RX_BUFFERS || + rp->rx_jumbo_pending || + rp->tx_pending > MAX_TXQ_ENTRIES || + rp->rx_mini_pending > MAX_RSPQ_ENTRIES || + rp->rx_mini_pending < MIN_RSPQ_ENTRIES || + rp->rx_pending < MIN_FL_ENTRIES || + rp->tx_pending < MIN_TXQ_ENTRIES) + return -EINVAL; + + if (adapter->flags & FULL_INIT_DONE) + return -EBUSY; + + for (qs = pi->first_qset; qs < pi->first_qset + pi->nqsets; qs++) { + s->ethrxq[qs].fl.size = rp->rx_pending + MIN_FL_RESID; + s->ethrxq[qs].rspq.size = rp->rx_mini_pending; + s->ethtxq[qs].q.size = rp->tx_pending; + } + return 0; +} + +/* + * Return the interrupt holdoff timer and count for the first Queue Set on the + * device. Our extension ioctl() (the cxgbtool interface) allows the + * interrupt holdoff timer to be read on all of the device's Queue Sets. + */ +static int cxgb4vf_get_coalesce(struct net_device *dev, + struct ethtool_coalesce *coalesce) +{ + const struct port_info *pi = netdev_priv(dev); + const struct adapter *adapter = pi->adapter; + const struct sge_rspq *rspq = &adapter->sge.ethrxq[pi->first_qset].rspq; + + coalesce->rx_coalesce_usecs = qtimer_val(adapter, rspq); + coalesce->rx_max_coalesced_frames = + ((rspq->intr_params & QINTR_CNT_EN) + ? adapter->sge.counter_val[rspq->pktcnt_idx] + : 0); + return 0; +} + +/* + * Set the RX interrupt holdoff timer and count for the first Queue Set on the + * interface. Our extension ioctl() (the cxgbtool interface) allows us to set + * the interrupt holdoff timer on any of the device's Queue Sets. + */ +static int cxgb4vf_set_coalesce(struct net_device *dev, + struct ethtool_coalesce *coalesce) +{ + const struct port_info *pi = netdev_priv(dev); + struct adapter *adapter = pi->adapter; + + return set_rxq_intr_params(adapter, + &adapter->sge.ethrxq[pi->first_qset].rspq, + coalesce->rx_coalesce_usecs, + coalesce->rx_max_coalesced_frames); +} + +/* + * Report current port link pause parameter settings. + */ +static void cxgb4vf_get_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *pauseparam) +{ + struct port_info *pi = netdev_priv(dev); + + pauseparam->autoneg = (pi->link_cfg.requested_fc & PAUSE_AUTONEG) != 0; + pauseparam->rx_pause = (pi->link_cfg.fc & PAUSE_RX) != 0; + pauseparam->tx_pause = (pi->link_cfg.fc & PAUSE_TX) != 0; +} + +/* + * Return whether RX Checksum Offloading is currently enabled for the device. + */ +static u32 cxgb4vf_get_rx_csum(struct net_device *dev) +{ + struct port_info *pi = netdev_priv(dev); + + return (pi->rx_offload & RX_CSO) != 0; +} + +/* + * Turn RX Checksum Offloading on or off for the device. + */ +static int cxgb4vf_set_rx_csum(struct net_device *dev, u32 csum) +{ + struct port_info *pi = netdev_priv(dev); + + if (csum) + pi->rx_offload |= RX_CSO; + else + pi->rx_offload &= ~RX_CSO; + return 0; +} + +/* + * Identify the port by blinking the port's LED. + */ +static int cxgb4vf_phys_id(struct net_device *dev, u32 id) +{ + struct port_info *pi = netdev_priv(dev); + + return t4vf_identify_port(pi->adapter, pi->viid, 5); +} + +/* + * Port stats maintained per queue of the port. + */ +struct queue_port_stats { + u64 tso; + u64 tx_csum; + u64 rx_csum; + u64 vlan_ex; + u64 vlan_ins; +}; + +/* + * Strings for the ETH_SS_STATS statistics set ("ethtool -S"). Note that + * these need to match the order of statistics returned by + * t4vf_get_port_stats(). + */ +static const char stats_strings[][ETH_GSTRING_LEN] = { + /* + * These must match the layout of the t4vf_port_stats structure. + */ + "TxBroadcastBytes ", + "TxBroadcastFrames ", + "TxMulticastBytes ", + "TxMulticastFrames ", + "TxUnicastBytes ", + "TxUnicastFrames ", + "TxDroppedFrames ", + "TxOffloadBytes ", + "TxOffloadFrames ", + "RxBroadcastBytes ", + "RxBroadcastFrames ", + "RxMulticastBytes ", + "RxMulticastFrames ", + "RxUnicastBytes ", + "RxUnicastFrames ", + "RxErrorFrames ", + + /* + * These are accumulated per-queue statistics and must match the + * order of the fields in the queue_port_stats structure. + */ + "TSO ", + "TxCsumOffload ", + "RxCsumGood ", + "VLANextractions ", + "VLANinsertions ", +}; + +/* + * Return the number of statistics in the specified statistics set. + */ +static int cxgb4vf_get_sset_count(struct net_device *dev, int sset) +{ + switch (sset) { + case ETH_SS_STATS: + return ARRAY_SIZE(stats_strings); + default: + return -EOPNOTSUPP; + } + /*NOTREACHED*/ +} + +/* + * Return the strings for the specified statistics set. + */ +static void cxgb4vf_get_strings(struct net_device *dev, + u32 sset, + u8 *data) +{ + switch (sset) { + case ETH_SS_STATS: + memcpy(data, stats_strings, sizeof(stats_strings)); + break; + } +} + +/* + * Small utility routine to accumulate queue statistics across the queues of + * a "port". + */ +static void collect_sge_port_stats(const struct adapter *adapter, + const struct port_info *pi, + struct queue_port_stats *stats) +{ + const struct sge_eth_txq *txq = &adapter->sge.ethtxq[pi->first_qset]; + const struct sge_eth_rxq *rxq = &adapter->sge.ethrxq[pi->first_qset]; + int qs; + + memset(stats, 0, sizeof(*stats)); + for (qs = 0; qs < pi->nqsets; qs++, rxq++, txq++) { + stats->tso += txq->tso; + stats->tx_csum += txq->tx_cso; + stats->rx_csum += rxq->stats.rx_cso; + stats->vlan_ex += rxq->stats.vlan_ex; + stats->vlan_ins += txq->vlan_ins; + } +} + +/* + * Return the ETH_SS_STATS statistics set. + */ +static void cxgb4vf_get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *stats, + u64 *data) +{ + struct port_info *pi = netdev2pinfo(dev); + struct adapter *adapter = pi->adapter; + int err = t4vf_get_port_stats(adapter, pi->pidx, + (struct t4vf_port_stats *)data); + if (err) + memset(data, 0, sizeof(struct t4vf_port_stats)); + + data += sizeof(struct t4vf_port_stats) / sizeof(u64); + collect_sge_port_stats(adapter, pi, (struct queue_port_stats *)data); +} + +/* + * Return the size of our register map. + */ +static int cxgb4vf_get_regs_len(struct net_device *dev) +{ + return T4VF_REGMAP_SIZE; +} + +/* + * Dump a block of registers, start to end inclusive, into a buffer. + */ +static void reg_block_dump(struct adapter *adapter, void *regbuf, + unsigned int start, unsigned int end) +{ + u32 *bp = regbuf + start - T4VF_REGMAP_START; + + for ( ; start <= end; start += sizeof(u32)) { + /* + * Avoid reading the Mailbox Control register since that + * can trigger a Mailbox Ownership Arbitration cycle and + * interfere with communication with the firmware. + */ + if (start == T4VF_CIM_BASE_ADDR + CIM_VF_EXT_MAILBOX_CTRL) + *bp++ = 0xffff; + else + *bp++ = t4_read_reg(adapter, start); + } +} + +/* + * Copy our entire register map into the provided buffer. + */ +static void cxgb4vf_get_regs(struct net_device *dev, + struct ethtool_regs *regs, + void *regbuf) +{ + struct adapter *adapter = netdev2adap(dev); + + regs->version = mk_adap_vers(adapter); + + /* + * Fill in register buffer with our register map. + */ + memset(regbuf, 0, T4VF_REGMAP_SIZE); + + reg_block_dump(adapter, regbuf, + T4VF_SGE_BASE_ADDR + T4VF_MOD_MAP_SGE_FIRST, + T4VF_SGE_BASE_ADDR + T4VF_MOD_MAP_SGE_LAST); + reg_block_dump(adapter, regbuf, + T4VF_MPS_BASE_ADDR + T4VF_MOD_MAP_MPS_FIRST, + T4VF_MPS_BASE_ADDR + T4VF_MOD_MAP_MPS_LAST); + reg_block_dump(adapter, regbuf, + T4VF_PL_BASE_ADDR + T4VF_MOD_MAP_PL_FIRST, + T4VF_PL_BASE_ADDR + T4VF_MOD_MAP_PL_LAST); + reg_block_dump(adapter, regbuf, + T4VF_CIM_BASE_ADDR + T4VF_MOD_MAP_CIM_FIRST, + T4VF_CIM_BASE_ADDR + T4VF_MOD_MAP_CIM_LAST); + + reg_block_dump(adapter, regbuf, + T4VF_MBDATA_BASE_ADDR + T4VF_MBDATA_FIRST, + T4VF_MBDATA_BASE_ADDR + T4VF_MBDATA_LAST); +} + +/* + * Report current Wake On LAN settings. + */ +static void cxgb4vf_get_wol(struct net_device *dev, + struct ethtool_wolinfo *wol) +{ + wol->supported = 0; + wol->wolopts = 0; + memset(&wol->sopass, 0, sizeof(wol->sopass)); +} + +/* + * Set TCP Segmentation Offloading feature capabilities. + */ +static int cxgb4vf_set_tso(struct net_device *dev, u32 tso) +{ + if (tso) + dev->features |= NETIF_F_TSO | NETIF_F_TSO6; + else + dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6); + return 0; +} + +static struct ethtool_ops cxgb4vf_ethtool_ops = { + .get_settings = cxgb4vf_get_settings, + .get_drvinfo = cxgb4vf_get_drvinfo, + .get_msglevel = cxgb4vf_get_msglevel, + .set_msglevel = cxgb4vf_set_msglevel, + .get_ringparam = cxgb4vf_get_ringparam, + .set_ringparam = cxgb4vf_set_ringparam, + .get_coalesce = cxgb4vf_get_coalesce, + .set_coalesce = cxgb4vf_set_coalesce, + .get_pauseparam = cxgb4vf_get_pauseparam, + .get_rx_csum = cxgb4vf_get_rx_csum, + .set_rx_csum = cxgb4vf_set_rx_csum, + .set_tx_csum = ethtool_op_set_tx_ipv6_csum, + .set_sg = ethtool_op_set_sg, + .get_link = ethtool_op_get_link, + .get_strings = cxgb4vf_get_strings, + .phys_id = cxgb4vf_phys_id, + .get_sset_count = cxgb4vf_get_sset_count, + .get_ethtool_stats = cxgb4vf_get_ethtool_stats, + .get_regs_len = cxgb4vf_get_regs_len, + .get_regs = cxgb4vf_get_regs, + .get_wol = cxgb4vf_get_wol, + .set_tso = cxgb4vf_set_tso, +}; + +/* + * /sys/kernel/debug/cxgb4vf support code and data. + * ================================================ + */ + +/* + * Show SGE Queue Set information. We display QPL Queues Sets per line. + */ +#define QPL 4 + +static int sge_qinfo_show(struct seq_file *seq, void *v) +{ + struct adapter *adapter = seq->private; + int eth_entries = DIV_ROUND_UP(adapter->sge.ethqsets, QPL); + int qs, r = (uintptr_t)v - 1; + + if (r) + seq_putc(seq, '\n'); + + #define S3(fmt_spec, s, v) \ + do {\ + seq_printf(seq, "%-12s", s); \ + for (qs = 0; qs < n; ++qs) \ + seq_printf(seq, " %16" fmt_spec, v); \ + seq_putc(seq, '\n'); \ + } while (0) + #define S(s, v) S3("s", s, v) + #define T(s, v) S3("u", s, txq[qs].v) + #define R(s, v) S3("u", s, rxq[qs].v) + + if (r < eth_entries) { + const struct sge_eth_rxq *rxq = &adapter->sge.ethrxq[r * QPL]; + const struct sge_eth_txq *txq = &adapter->sge.ethtxq[r * QPL]; + int n = min(QPL, adapter->sge.ethqsets - QPL * r); + + S("QType:", "Ethernet"); + S("Interface:", + (rxq[qs].rspq.netdev + ? rxq[qs].rspq.netdev->name + : "N/A")); + S3("d", "Port:", + (rxq[qs].rspq.netdev + ? ((struct port_info *) + netdev_priv(rxq[qs].rspq.netdev))->port_id + : -1)); + T("TxQ ID:", q.abs_id); + T("TxQ size:", q.size); + T("TxQ inuse:", q.in_use); + T("TxQ PIdx:", q.pidx); + T("TxQ CIdx:", q.cidx); + R("RspQ ID:", rspq.abs_id); + R("RspQ size:", rspq.size); + R("RspQE size:", rspq.iqe_len); + S3("u", "Intr delay:", qtimer_val(adapter, &rxq[qs].rspq)); + S3("u", "Intr pktcnt:", + adapter->sge.counter_val[rxq[qs].rspq.pktcnt_idx]); + R("RspQ CIdx:", rspq.cidx); + R("RspQ Gen:", rspq.gen); + R("FL ID:", fl.abs_id); + R("FL size:", fl.size - MIN_FL_RESID); + R("FL avail:", fl.avail); + R("FL PIdx:", fl.pidx); + R("FL CIdx:", fl.cidx); + return 0; + } + + r -= eth_entries; + if (r == 0) { + const struct sge_rspq *evtq = &adapter->sge.fw_evtq; + + seq_printf(seq, "%-12s %16s\n", "QType:", "FW event queue"); + seq_printf(seq, "%-12s %16u\n", "RspQ ID:", evtq->abs_id); + seq_printf(seq, "%-12s %16u\n", "Intr delay:", + qtimer_val(adapter, evtq)); + seq_printf(seq, "%-12s %16u\n", "Intr pktcnt:", + adapter->sge.counter_val[evtq->pktcnt_idx]); + seq_printf(seq, "%-12s %16u\n", "RspQ Cidx:", evtq->cidx); + seq_printf(seq, "%-12s %16u\n", "RspQ Gen:", evtq->gen); + } else if (r == 1) { + const struct sge_rspq *intrq = &adapter->sge.intrq; + + seq_printf(seq, "%-12s %16s\n", "QType:", "Interrupt Queue"); + seq_printf(seq, "%-12s %16u\n", "RspQ ID:", intrq->abs_id); + seq_printf(seq, "%-12s %16u\n", "Intr delay:", + qtimer_val(adapter, intrq)); + seq_printf(seq, "%-12s %16u\n", "Intr pktcnt:", + adapter->sge.counter_val[intrq->pktcnt_idx]); + seq_printf(seq, "%-12s %16u\n", "RspQ Cidx:", intrq->cidx); + seq_printf(seq, "%-12s %16u\n", "RspQ Gen:", intrq->gen); + } + + #undef R + #undef T + #undef S + #undef S3 + + return 0; +} + +/* + * Return the number of "entries" in our "file". We group the multi-Queue + * sections with QPL Queue Sets per "entry". The sections of the output are: + * + * Ethernet RX/TX Queue Sets + * Firmware Event Queue + * Forwarded Interrupt Queue (if in MSI mode) + */ +static int sge_queue_entries(const struct adapter *adapter) +{ + return DIV_ROUND_UP(adapter->sge.ethqsets, QPL) + 1 + + ((adapter->flags & USING_MSI) != 0); +} + +static void *sge_queue_start(struct seq_file *seq, loff_t *pos) +{ + int entries = sge_queue_entries(seq->private); + + return *pos < entries ? (void *)((uintptr_t)*pos + 1) : NULL; +} + +static void sge_queue_stop(struct seq_file *seq, void *v) +{ +} + +static void *sge_queue_next(struct seq_file *seq, void *v, loff_t *pos) +{ + int entries = sge_queue_entries(seq->private); + + ++*pos; + return *pos < entries ? (void *)((uintptr_t)*pos + 1) : NULL; +} + +static const struct seq_operations sge_qinfo_seq_ops = { + .start = sge_queue_start, + .next = sge_queue_next, + .stop = sge_queue_stop, + .show = sge_qinfo_show +}; + +static int sge_qinfo_open(struct inode *inode, struct file *file) +{ + int res = seq_open(file, &sge_qinfo_seq_ops); + + if (!res) { + struct seq_file *seq = file->private_data; + seq->private = inode->i_private; + } + return res; +} + +static const struct file_operations sge_qinfo_debugfs_fops = { + .owner = THIS_MODULE, + .open = sge_qinfo_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +/* + * Show SGE Queue Set statistics. We display QPL Queues Sets per line. + */ +#define QPL 4 + +static int sge_qstats_show(struct seq_file *seq, void *v) +{ + struct adapter *adapter = seq->private; + int eth_entries = DIV_ROUND_UP(adapter->sge.ethqsets, QPL); + int qs, r = (uintptr_t)v - 1; + + if (r) + seq_putc(seq, '\n'); + + #define S3(fmt, s, v) \ + do { \ + seq_printf(seq, "%-16s", s); \ + for (qs = 0; qs < n; ++qs) \ + seq_printf(seq, " %8" fmt, v); \ + seq_putc(seq, '\n'); \ + } while (0) + #define S(s, v) S3("s", s, v) + + #define T3(fmt, s, v) S3(fmt, s, txq[qs].v) + #define T(s, v) T3("lu", s, v) + + #define R3(fmt, s, v) S3(fmt, s, rxq[qs].v) + #define R(s, v) R3("lu", s, v) + + if (r < eth_entries) { + const struct sge_eth_rxq *rxq = &adapter->sge.ethrxq[r * QPL]; + const struct sge_eth_txq *txq = &adapter->sge.ethtxq[r * QPL]; + int n = min(QPL, adapter->sge.ethqsets - QPL * r); + + S("QType:", "Ethernet"); + S("Interface:", + (rxq[qs].rspq.netdev + ? rxq[qs].rspq.netdev->name + : "N/A")); + R3("u", "RspQNullInts:", rspq.unhandled_irqs); + R("RxPackets:", stats.pkts); + R("RxCSO:", stats.rx_cso); + R("VLANxtract:", stats.vlan_ex); + R("LROmerged:", stats.lro_merged); + R("LROpackets:", stats.lro_pkts); + R("RxDrops:", stats.rx_drops); + T("TSO:", tso); + T("TxCSO:", tx_cso); + T("VLANins:", vlan_ins); + T("TxQFull:", q.stops); + T("TxQRestarts:", q.restarts); + T("TxMapErr:", mapping_err); + R("FLAllocErr:", fl.alloc_failed); + R("FLLrgAlcErr:", fl.large_alloc_failed); + R("FLStarving:", fl.starving); + return 0; + } + + r -= eth_entries; + if (r == 0) { + const struct sge_rspq *evtq = &adapter->sge.fw_evtq; + + seq_printf(seq, "%-8s %16s\n", "QType:", "FW event queue"); + seq_printf(seq, "%-16s %8u\n", "RspQNullInts:", + evtq->unhandled_irqs); + seq_printf(seq, "%-16s %8u\n", "RspQ CIdx:", evtq->cidx); + seq_printf(seq, "%-16s %8u\n", "RspQ Gen:", evtq->gen); + } else if (r == 1) { + const struct sge_rspq *intrq = &adapter->sge.intrq; + + seq_printf(seq, "%-8s %16s\n", "QType:", "Interrupt Queue"); + seq_printf(seq, "%-16s %8u\n", "RspQNullInts:", + intrq->unhandled_irqs); + seq_printf(seq, "%-16s %8u\n", "RspQ CIdx:", intrq->cidx); + seq_printf(seq, "%-16s %8u\n", "RspQ Gen:", intrq->gen); + } + + #undef R + #undef T + #undef S + #undef R3 + #undef T3 + #undef S3 + + return 0; +} + +/* + * Return the number of "entries" in our "file". We group the multi-Queue + * sections with QPL Queue Sets per "entry". The sections of the output are: + * + * Ethernet RX/TX Queue Sets + * Firmware Event Queue + * Forwarded Interrupt Queue (if in MSI mode) + */ +static int sge_qstats_entries(const struct adapter *adapter) +{ + return DIV_ROUND_UP(adapter->sge.ethqsets, QPL) + 1 + + ((adapter->flags & USING_MSI) != 0); +} + +static void *sge_qstats_start(struct seq_file *seq, loff_t *pos) +{ + int entries = sge_qstats_entries(seq->private); + + return *pos < entries ? (void *)((uintptr_t)*pos + 1) : NULL; +} + +static void sge_qstats_stop(struct seq_file *seq, void *v) +{ +} + +static void *sge_qstats_next(struct seq_file *seq, void *v, loff_t *pos) +{ + int entries = sge_qstats_entries(seq->private); + + (*pos)++; + return *pos < entries ? (void *)((uintptr_t)*pos + 1) : NULL; +} + +static const struct seq_operations sge_qstats_seq_ops = { + .start = sge_qstats_start, + .next = sge_qstats_next, + .stop = sge_qstats_stop, + .show = sge_qstats_show +}; + +static int sge_qstats_open(struct inode *inode, struct file *file) +{ + int res = seq_open(file, &sge_qstats_seq_ops); + + if (res == 0) { + struct seq_file *seq = file->private_data; + seq->private = inode->i_private; + } + return res; +} + +static const struct file_operations sge_qstats_proc_fops = { + .owner = THIS_MODULE, + .open = sge_qstats_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +/* + * Show PCI-E SR-IOV Virtual Function Resource Limits. + */ +static int resources_show(struct seq_file *seq, void *v) +{ + struct adapter *adapter = seq->private; + struct vf_resources *vfres = &adapter->params.vfres; + + #define S(desc, fmt, var) \ + seq_printf(seq, "%-60s " fmt "\n", \ + desc " (" #var "):", vfres->var) + + S("Virtual Interfaces", "%d", nvi); + S("Egress Queues", "%d", neq); + S("Ethernet Control", "%d", nethctrl); + S("Ingress Queues/w Free Lists/Interrupts", "%d", niqflint); + S("Ingress Queues", "%d", niq); + S("Traffic Class", "%d", tc); + S("Port Access Rights Mask", "%#x", pmask); + S("MAC Address Filters", "%d", nexactf); + S("Firmware Command Read Capabilities", "%#x", r_caps); + S("Firmware Command Write/Execute Capabilities", "%#x", wx_caps); + + #undef S + + return 0; +} + +static int resources_open(struct inode *inode, struct file *file) +{ + return single_open(file, resources_show, inode->i_private); +} + +static const struct file_operations resources_proc_fops = { + .owner = THIS_MODULE, + .open = resources_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +/* + * Show Virtual Interfaces. + */ +static int interfaces_show(struct seq_file *seq, void *v) +{ + if (v == SEQ_START_TOKEN) { + seq_puts(seq, "Interface Port VIID\n"); + } else { + struct adapter *adapter = seq->private; + int pidx = (uintptr_t)v - 2; + struct net_device *dev = adapter->port[pidx]; + struct port_info *pi = netdev_priv(dev); + + seq_printf(seq, "%9s %4d %#5x\n", + dev->name, pi->port_id, pi->viid); + } + return 0; +} + +static inline void *interfaces_get_idx(struct adapter *adapter, loff_t pos) +{ + return pos <= adapter->params.nports + ? (void *)(uintptr_t)(pos + 1) + : NULL; +} + +static void *interfaces_start(struct seq_file *seq, loff_t *pos) +{ + return *pos + ? interfaces_get_idx(seq->private, *pos) + : SEQ_START_TOKEN; +} + +static void *interfaces_next(struct seq_file *seq, void *v, loff_t *pos) +{ + (*pos)++; + return interfaces_get_idx(seq->private, *pos); +} + +static void interfaces_stop(struct seq_file *seq, void *v) +{ +} + +static const struct seq_operations interfaces_seq_ops = { + .start = interfaces_start, + .next = interfaces_next, + .stop = interfaces_stop, + .show = interfaces_show +}; + +static int interfaces_open(struct inode *inode, struct file *file) +{ + int res = seq_open(file, &interfaces_seq_ops); + + if (res == 0) { + struct seq_file *seq = file->private_data; + seq->private = inode->i_private; + } + return res; +} + +static const struct file_operations interfaces_proc_fops = { + .owner = THIS_MODULE, + .open = interfaces_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +/* + * /sys/kernel/debugfs/cxgb4vf/ files list. + */ +struct cxgb4vf_debugfs_entry { + const char *name; /* name of debugfs node */ + mode_t mode; /* file system mode */ + const struct file_operations *fops; +}; + +static struct cxgb4vf_debugfs_entry debugfs_files[] = { + { "sge_qinfo", S_IRUGO, &sge_qinfo_debugfs_fops }, + { "sge_qstats", S_IRUGO, &sge_qstats_proc_fops }, + { "resources", S_IRUGO, &resources_proc_fops }, + { "interfaces", S_IRUGO, &interfaces_proc_fops }, +}; + +/* + * Module and device initialization and cleanup code. + * ================================================== + */ + +/* + * Set up out /sys/kernel/debug/cxgb4vf sub-nodes. We assume that the + * directory (debugfs_root) has already been set up. + */ +static int __devinit setup_debugfs(struct adapter *adapter) +{ + int i; + + BUG_ON(adapter->debugfs_root == NULL); + + /* + * Debugfs support is best effort. + */ + for (i = 0; i < ARRAY_SIZE(debugfs_files); i++) + (void)debugfs_create_file(debugfs_files[i].name, + debugfs_files[i].mode, + adapter->debugfs_root, + (void *)adapter, + debugfs_files[i].fops); + + return 0; +} + +/* + * Tear down the /sys/kernel/debug/cxgb4vf sub-nodes created above. We leave + * it to our caller to tear down the directory (debugfs_root). + */ +static void __devexit cleanup_debugfs(struct adapter *adapter) +{ + BUG_ON(adapter->debugfs_root == NULL); + + /* + * Unlike our sister routine cleanup_proc(), we don't need to remove + * individual entries because a call will be made to + * debugfs_remove_recursive(). We just need to clean up any ancillary + * persistent state. + */ + /* nothing to do */ +} + +/* + * Perform early "adapter" initialization. This is where we discover what + * adapter parameters we're going to be using and initialize basic adapter + * hardware support. + */ +static int adap_init0(struct adapter *adapter) +{ + struct vf_resources *vfres = &adapter->params.vfres; + struct sge_params *sge_params = &adapter->params.sge; + struct sge *s = &adapter->sge; + unsigned int ethqsets; + int err; + + /* + * Wait for the device to become ready before proceeding ... + */ + err = t4vf_wait_dev_ready(adapter); + if (err) { + dev_err(adapter->pdev_dev, "device didn't become ready:" + " err=%d\n", err); + return err; + } + + /* + * Grab basic operational parameters. These will predominantly have + * been set up by the Physical Function Driver or will be hard coded + * into the adapter. We just have to live with them ... Note that + * we _must_ get our VPD parameters before our SGE parameters because + * we need to know the adapter's core clock from the VPD in order to + * properly decode the SGE Timer Values. + */ + err = t4vf_get_dev_params(adapter); + if (err) { + dev_err(adapter->pdev_dev, "unable to retrieve adapter" + " device parameters: err=%d\n", err); + return err; + } + err = t4vf_get_vpd_params(adapter); + if (err) { + dev_err(adapter->pdev_dev, "unable to retrieve adapter" + " VPD parameters: err=%d\n", err); + return err; + } + err = t4vf_get_sge_params(adapter); + if (err) { + dev_err(adapter->pdev_dev, "unable to retrieve adapter" + " SGE parameters: err=%d\n", err); + return err; + } + err = t4vf_get_rss_glb_config(adapter); + if (err) { + dev_err(adapter->pdev_dev, "unable to retrieve adapter" + " RSS parameters: err=%d\n", err); + return err; + } + if (adapter->params.rss.mode != + FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL) { + dev_err(adapter->pdev_dev, "unable to operate with global RSS" + " mode %d\n", adapter->params.rss.mode); + return -EINVAL; + } + err = t4vf_sge_init(adapter); + if (err) { + dev_err(adapter->pdev_dev, "unable to use adapter parameters:" + " err=%d\n", err); + return err; + } + + /* + * Retrieve our RX interrupt holdoff timer values and counter + * threshold values from the SGE parameters. + */ + s->timer_val[0] = core_ticks_to_us(adapter, + TIMERVALUE0_GET(sge_params->sge_timer_value_0_and_1)); + s->timer_val[1] = core_ticks_to_us(adapter, + TIMERVALUE1_GET(sge_params->sge_timer_value_0_and_1)); + s->timer_val[2] = core_ticks_to_us(adapter, + TIMERVALUE0_GET(sge_params->sge_timer_value_2_and_3)); + s->timer_val[3] = core_ticks_to_us(adapter, + TIMERVALUE1_GET(sge_params->sge_timer_value_2_and_3)); + s->timer_val[4] = core_ticks_to_us(adapter, + TIMERVALUE0_GET(sge_params->sge_timer_value_4_and_5)); + s->timer_val[5] = core_ticks_to_us(adapter, + TIMERVALUE1_GET(sge_params->sge_timer_value_4_and_5)); + + s->counter_val[0] = + THRESHOLD_0_GET(sge_params->sge_ingress_rx_threshold); + s->counter_val[1] = + THRESHOLD_1_GET(sge_params->sge_ingress_rx_threshold); + s->counter_val[2] = + THRESHOLD_2_GET(sge_params->sge_ingress_rx_threshold); + s->counter_val[3] = + THRESHOLD_3_GET(sge_params->sge_ingress_rx_threshold); + + /* + * Grab our Virtual Interface resource allocation, extract the + * features that we're interested in and do a bit of sanity testing on + * what we discover. + */ + err = t4vf_get_vfres(adapter); + if (err) { + dev_err(adapter->pdev_dev, "unable to get virtual interface" + " resources: err=%d\n", err); + return err; + } + + /* + * The number of "ports" which we support is equal to the number of + * Virtual Interfaces with which we've been provisioned. + */ + adapter->params.nports = vfres->nvi; + if (adapter->params.nports > MAX_NPORTS) { + dev_warn(adapter->pdev_dev, "only using %d of %d allowed" + " virtual interfaces\n", MAX_NPORTS, + adapter->params.nports); + adapter->params.nports = MAX_NPORTS; + } + + /* + * We need to reserve a number of the ingress queues with Free List + * and Interrupt capabilities for special interrupt purposes (like + * asynchronous firmware messages, or forwarded interrupts if we're + * using MSI). The rest of the FL/Intr-capable ingress queues will be + * matched up one-for-one with Ethernet/Control egress queues in order + * to form "Queue Sets" which will be aportioned between the "ports". + * For each Queue Set, we'll need the ability to allocate two Egress + * Contexts -- one for the Ingress Queue Free List and one for the TX + * Ethernet Queue. + */ + ethqsets = vfres->niqflint - INGQ_EXTRAS; + if (vfres->nethctrl != ethqsets) { + dev_warn(adapter->pdev_dev, "unequal number of [available]" + " ingress/egress queues (%d/%d); using minimum for" + " number of Queue Sets\n", ethqsets, vfres->nethctrl); + ethqsets = min(vfres->nethctrl, ethqsets); + } + if (vfres->neq < ethqsets*2) { + dev_warn(adapter->pdev_dev, "Not enough Egress Contexts (%d)" + " to support Queue Sets (%d); reducing allowed Queue" + " Sets\n", vfres->neq, ethqsets); + ethqsets = vfres->neq/2; + } + if (ethqsets > MAX_ETH_QSETS) { + dev_warn(adapter->pdev_dev, "only using %d of %d allowed Queue" + " Sets\n", MAX_ETH_QSETS, adapter->sge.max_ethqsets); + ethqsets = MAX_ETH_QSETS; + } + if (vfres->niq != 0 || vfres->neq > ethqsets*2) { + dev_warn(adapter->pdev_dev, "unused resources niq/neq (%d/%d)" + " ignored\n", vfres->niq, vfres->neq - ethqsets*2); + } + adapter->sge.max_ethqsets = ethqsets; + + /* + * Check for various parameter sanity issues. Most checks simply + * result in us using fewer resources than our provissioning but we + * do need at least one "port" with which to work ... + */ + if (adapter->sge.max_ethqsets < adapter->params.nports) { + dev_warn(adapter->pdev_dev, "only using %d of %d available" + " virtual interfaces (too few Queue Sets)\n", + adapter->sge.max_ethqsets, adapter->params.nports); + adapter->params.nports = adapter->sge.max_ethqsets; + } + if (adapter->params.nports == 0) { + dev_err(adapter->pdev_dev, "no virtual interfaces configured/" + "usable!\n"); + return -EINVAL; + } + return 0; +} + +static inline void init_rspq(struct sge_rspq *rspq, u8 timer_idx, + u8 pkt_cnt_idx, unsigned int size, + unsigned int iqe_size) +{ + rspq->intr_params = (QINTR_TIMER_IDX(timer_idx) | + (pkt_cnt_idx < SGE_NCOUNTERS ? QINTR_CNT_EN : 0)); + rspq->pktcnt_idx = (pkt_cnt_idx < SGE_NCOUNTERS + ? pkt_cnt_idx + : 0); + rspq->iqe_len = iqe_size; + rspq->size = size; +} + +/* + * Perform default configuration of DMA queues depending on the number and + * type of ports we found and the number of available CPUs. Most settings can + * be modified by the admin via ethtool and cxgbtool prior to the adapter + * being brought up for the first time. + */ +static void __devinit cfg_queues(struct adapter *adapter) +{ + struct sge *s = &adapter->sge; + int q10g, n10g, qidx, pidx, qs; + + /* + * We should not be called till we know how many Queue Sets we can + * support. In particular, this means that we need to know what kind + * of interrupts we'll be using ... + */ + BUG_ON((adapter->flags & (USING_MSIX|USING_MSI)) == 0); + + /* + * Count the number of 10GbE Virtual Interfaces that we have. + */ + n10g = 0; + for_each_port(adapter, pidx) + n10g += is_10g_port(&adap2pinfo(adapter, pidx)->link_cfg); + + /* + * We default to 1 queue per non-10G port and up to # of cores queues + * per 10G port. + */ + if (n10g == 0) + q10g = 0; + else { + int n1g = (adapter->params.nports - n10g); + q10g = (adapter->sge.max_ethqsets - n1g) / n10g; + if (q10g > num_online_cpus()) + q10g = num_online_cpus(); + } + + /* + * Allocate the "Queue Sets" to the various Virtual Interfaces. + * The layout will be established in setup_sge_queues() when the + * adapter is brough up for the first time. + */ + qidx = 0; + for_each_port(adapter, pidx) { + struct port_info *pi = adap2pinfo(adapter, pidx); + + pi->first_qset = qidx; + pi->nqsets = is_10g_port(&pi->link_cfg) ? q10g : 1; + qidx += pi->nqsets; + } + s->ethqsets = qidx; + + /* + * Set up default Queue Set parameters ... Start off with the + * shortest interrupt holdoff timer. + */ + for (qs = 0; qs < s->max_ethqsets; qs++) { + struct sge_eth_rxq *rxq = &s->ethrxq[qs]; + struct sge_eth_txq *txq = &s->ethtxq[qs]; + + init_rspq(&rxq->rspq, 0, 0, 1024, L1_CACHE_BYTES); + rxq->fl.size = 72; + txq->q.size = 1024; + } + + /* + * The firmware event queue is used for link state changes and + * notifications of TX DMA completions. + */ + init_rspq(&s->fw_evtq, SGE_TIMER_RSTRT_CNTR, 0, 512, + L1_CACHE_BYTES); + + /* + * The forwarded interrupt queue is used when we're in MSI interrupt + * mode. In this mode all interrupts associated with RX queues will + * be forwarded to a single queue which we'll associate with our MSI + * interrupt vector. The messages dropped in the forwarded interrupt + * queue will indicate which ingress queue needs servicing ... This + * queue needs to be large enough to accommodate all of the ingress + * queues which are forwarding their interrupt (+1 to prevent the PIDX + * from equalling the CIDX if every ingress queue has an outstanding + * interrupt). The queue doesn't need to be any larger because no + * ingress queue will ever have more than one outstanding interrupt at + * any time ... + */ + init_rspq(&s->intrq, SGE_TIMER_RSTRT_CNTR, 0, MSIX_ENTRIES + 1, + L1_CACHE_BYTES); +} + +/* + * Reduce the number of Ethernet queues across all ports to at most n. + * n provides at least one queue per port. + */ +static void __devinit reduce_ethqs(struct adapter *adapter, int n) +{ + int i; + struct port_info *pi; + + /* + * While we have too many active Ether Queue Sets, interate across the + * "ports" and reduce their individual Queue Set allocations. + */ + BUG_ON(n < adapter->params.nports); + while (n < adapter->sge.ethqsets) + for_each_port(adapter, i) { + pi = adap2pinfo(adapter, i); + if (pi->nqsets > 1) { + pi->nqsets--; + adapter->sge.ethqsets--; + if (adapter->sge.ethqsets <= n) + break; + } + } + + /* + * Reassign the starting Queue Sets for each of the "ports" ... + */ + n = 0; + for_each_port(adapter, i) { + pi = adap2pinfo(adapter, i); + pi->first_qset = n; + n += pi->nqsets; + } +} + +/* + * We need to grab enough MSI-X vectors to cover our interrupt needs. Ideally + * we get a separate MSI-X vector for every "Queue Set" plus any extras we + * need. Minimally we need one for every Virtual Interface plus those needed + * for our "extras". Note that this process may lower the maximum number of + * allowed Queue Sets ... + */ +static int __devinit enable_msix(struct adapter *adapter) +{ + int i, err, want, need; + struct msix_entry entries[MSIX_ENTRIES]; + struct sge *s = &adapter->sge; + + for (i = 0; i < MSIX_ENTRIES; ++i) + entries[i].entry = i; + + /* + * We _want_ enough MSI-X interrupts to cover all of our "Queue Sets" + * plus those needed for our "extras" (for example, the firmware + * message queue). We _need_ at least one "Queue Set" per Virtual + * Interface plus those needed for our "extras". So now we get to see + * if the song is right ... + */ + want = s->max_ethqsets + MSIX_EXTRAS; + need = adapter->params.nports + MSIX_EXTRAS; + while ((err = pci_enable_msix(adapter->pdev, entries, want)) >= need) + want = err; + + if (err == 0) { + int nqsets = want - MSIX_EXTRAS; + if (nqsets < s->max_ethqsets) { + dev_warn(adapter->pdev_dev, "only enough MSI-X vectors" + " for %d Queue Sets\n", nqsets); + s->max_ethqsets = nqsets; + if (nqsets < s->ethqsets) + reduce_ethqs(adapter, nqsets); + } + for (i = 0; i < want; ++i) + adapter->msix_info[i].vec = entries[i].vector; + } else if (err > 0) { + pci_disable_msix(adapter->pdev); + dev_info(adapter->pdev_dev, "only %d MSI-X vectors left," + " not using MSI-X\n", err); + } + return err; +} + +#ifdef HAVE_NET_DEVICE_OPS +static const struct net_device_ops cxgb4vf_netdev_ops = { + .ndo_open = cxgb4vf_open, + .ndo_stop = cxgb4vf_stop, + .ndo_start_xmit = t4vf_eth_xmit, + .ndo_get_stats = cxgb4vf_get_stats, + .ndo_set_rx_mode = cxgb4vf_set_rxmode, + .ndo_set_mac_address = cxgb4vf_set_mac_addr, + .ndo_select_queue = cxgb4vf_select_queue, + .ndo_validate_addr = eth_validate_addr, + .ndo_do_ioctl = cxgb4vf_do_ioctl, + .ndo_change_mtu = cxgb4vf_change_mtu, + .ndo_vlan_rx_register = cxgb4vf_vlan_rx_register, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = cxgb4vf_poll_controller, +#endif +}; +#endif + +/* + * "Probe" a device: initialize a device and construct all kernel and driver + * state needed to manage the device. This routine is called "init_one" in + * the PF Driver ... + */ +static int __devinit cxgb4vf_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + static int version_printed; + + int pci_using_dac; + int err, pidx; + unsigned int pmask; + struct adapter *adapter; + struct port_info *pi; + struct net_device *netdev; + + /* + * Vet our module parameters. + */ + if (msi != MSI_MSIX && msi != MSI_MSI) { + dev_err(&pdev->dev, "bad module parameter msi=%d; must be %d" + " (MSI-X or MSI) or %d (MSI)\n", msi, MSI_MSIX, + MSI_MSI); + err = -EINVAL; + goto err_out; + } + + /* + * Print our driver banner the first time we're called to initialize a + * device. + */ + if (version_printed == 0) { + printk(KERN_INFO "%s - version %s\n", DRV_DESC, DRV_VERSION); + version_printed = 1; + } + + /* + * Reserve PCI resources for the device. If we can't get them some + * other driver may have already claimed the device ... + */ + err = pci_request_regions(pdev, KBUILD_MODNAME); + if (err) { + dev_err(&pdev->dev, "cannot obtain PCI resources\n"); + return err; + } + + /* + * Initialize generic PCI device state. + */ + err = pci_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, "cannot enable PCI device\n"); + goto err_release_regions; + } + + /* + * Set up our DMA mask: try for 64-bit address masking first and + * fall back to 32-bit if we can't get 64 bits ... + */ + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64)); + if (err == 0) { + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); + if (err) { + dev_err(&pdev->dev, "unable to obtain 64-bit DMA for" + " coherent allocations\n"); + goto err_disable_device; + } + pci_using_dac = 1; + } else { + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (err != 0) { + dev_err(&pdev->dev, "no usable DMA configuration\n"); + goto err_disable_device; + } + pci_using_dac = 0; + } + + /* + * Enable bus mastering for the device ... + */ + pci_set_master(pdev); + + /* + * Allocate our adapter data structure and attach it to the device. + */ + adapter = kzalloc(sizeof(*adapter), GFP_KERNEL); + if (!adapter) { + err = -ENOMEM; + goto err_disable_device; + } + pci_set_drvdata(pdev, adapter); + adapter->pdev = pdev; + adapter->pdev_dev = &pdev->dev; + + /* + * Initialize SMP data synchronization resources. + */ + spin_lock_init(&adapter->stats_lock); + + /* + * Map our I/O registers in BAR0. + */ + adapter->regs = pci_ioremap_bar(pdev, 0); + if (!adapter->regs) { + dev_err(&pdev->dev, "cannot map device registers\n"); + err = -ENOMEM; + goto err_free_adapter; + } + + /* + * Initialize adapter level features. + */ + adapter->name = pci_name(pdev); + adapter->msg_enable = dflt_msg_enable; + err = adap_init0(adapter); + if (err) + goto err_unmap_bar; + + /* + * Allocate our "adapter ports" and stitch everything together. + */ + pmask = adapter->params.vfres.pmask; + for_each_port(adapter, pidx) { + int port_id, viid; + + /* + * We simplistically allocate our virtual interfaces + * sequentially across the port numbers to which we have + * access rights. This should be configurable in some manner + * ... + */ + if (pmask == 0) + break; + port_id = ffs(pmask) - 1; + pmask &= ~(1 << port_id); + viid = t4vf_alloc_vi(adapter, port_id); + if (viid < 0) { + dev_err(&pdev->dev, "cannot allocate VI for port %d:" + " err=%d\n", port_id, viid); + err = viid; + goto err_free_dev; + } + + /* + * Allocate our network device and stitch things together. + */ + netdev = alloc_etherdev_mq(sizeof(struct port_info), + MAX_PORT_QSETS); + if (netdev == NULL) { + dev_err(&pdev->dev, "cannot allocate netdev for" + " port %d\n", port_id); + t4vf_free_vi(adapter, viid); + err = -ENOMEM; + goto err_free_dev; + } + adapter->port[pidx] = netdev; + SET_NETDEV_DEV(netdev, &pdev->dev); + pi = netdev_priv(netdev); + pi->adapter = adapter; + pi->pidx = pidx; + pi->port_id = port_id; + pi->viid = viid; + + /* + * Initialize the starting state of our "port" and register + * it. + */ + pi->xact_addr_filt = -1; + pi->rx_offload = RX_CSO; + netif_carrier_off(netdev); + netif_tx_stop_all_queues(netdev); + netdev->irq = pdev->irq; + + netdev->features = (NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 | + NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | + NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX | + NETIF_F_GRO); + if (pci_using_dac) + netdev->features |= NETIF_F_HIGHDMA; + netdev->vlan_features = + (netdev->features & + ~(NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX)); + +#ifdef HAVE_NET_DEVICE_OPS + netdev->netdev_ops = &cxgb4vf_netdev_ops; +#else + netdev->vlan_rx_register = cxgb4vf_vlan_rx_register; + netdev->open = cxgb4vf_open; + netdev->stop = cxgb4vf_stop; + netdev->hard_start_xmit = t4vf_eth_xmit; + netdev->get_stats = cxgb4vf_get_stats; + netdev->set_rx_mode = cxgb4vf_set_rxmode; + netdev->do_ioctl = cxgb4vf_do_ioctl; + netdev->change_mtu = cxgb4vf_change_mtu; + netdev->set_mac_address = cxgb4vf_set_mac_addr; + netdev->select_queue = cxgb4vf_select_queue; +#ifdef CONFIG_NET_POLL_CONTROLLER + netdev->poll_controller = cxgb4vf_poll_controller; +#endif +#endif + SET_ETHTOOL_OPS(netdev, &cxgb4vf_ethtool_ops); + + /* + * Initialize the hardware/software state for the port. + */ + err = t4vf_port_init(adapter, pidx); + if (err) { + dev_err(&pdev->dev, "cannot initialize port %d\n", + pidx); + goto err_free_dev; + } + } + + /* + * The "card" is now ready to go. If any errors occur during device + * registration we do not fail the whole "card" but rather proceed + * only with the ports we manage to register successfully. However we + * must register at least one net device. + */ + for_each_port(adapter, pidx) { + netdev = adapter->port[pidx]; + if (netdev == NULL) + continue; + + err = register_netdev(netdev); + if (err) { + dev_warn(&pdev->dev, "cannot register net device %s," + " skipping\n", netdev->name); + continue; + } + + set_bit(pidx, &adapter->registered_device_map); + } + if (adapter->registered_device_map == 0) { + dev_err(&pdev->dev, "could not register any net devices\n"); + goto err_free_dev; + } + + /* + * Set up our debugfs entries. + */ + if (cxgb4vf_debugfs_root) { + adapter->debugfs_root = + debugfs_create_dir(pci_name(pdev), + cxgb4vf_debugfs_root); + if (adapter->debugfs_root == NULL) + dev_warn(&pdev->dev, "could not create debugfs" + " directory"); + else + setup_debugfs(adapter); + } + + /* + * See what interrupts we'll be using. If we've been configured to + * use MSI-X interrupts, try to enable them but fall back to using + * MSI interrupts if we can't enable MSI-X interrupts. If we can't + * get MSI interrupts we bail with the error. + */ + if (msi == MSI_MSIX && enable_msix(adapter) == 0) + adapter->flags |= USING_MSIX; + else { + err = pci_enable_msi(pdev); + if (err) { + dev_err(&pdev->dev, "Unable to allocate %s interrupts;" + " err=%d\n", + msi == MSI_MSIX ? "MSI-X or MSI" : "MSI", err); + goto err_free_debugfs; + } + adapter->flags |= USING_MSI; + } + + /* + * Now that we know how many "ports" we have and what their types are, + * and how many Queue Sets we can support, we can configure our queue + * resources. + */ + cfg_queues(adapter); + + /* + * Print a short notice on the existance and configuration of the new + * VF network device ... + */ + for_each_port(adapter, pidx) { + dev_info(adapter->pdev_dev, "%s: Chelsio VF NIC PCIe %s\n", + adapter->port[pidx]->name, + (adapter->flags & USING_MSIX) ? "MSI-X" : + (adapter->flags & USING_MSI) ? "MSI" : ""); + } + + /* + * Return success! + */ + return 0; + + /* + * Error recovery and exit code. Unwind state that's been created + * so far and return the error. + */ + +err_free_debugfs: + if (adapter->debugfs_root) { + cleanup_debugfs(adapter); + debugfs_remove_recursive(adapter->debugfs_root); + } + +err_free_dev: + for_each_port(adapter, pidx) { + netdev = adapter->port[pidx]; + if (netdev == NULL) + continue; + pi = netdev_priv(netdev); + t4vf_free_vi(adapter, pi->viid); + if (test_bit(pidx, &adapter->registered_device_map)) + unregister_netdev(netdev); + free_netdev(netdev); + } + +err_unmap_bar: + iounmap(adapter->regs); + +err_free_adapter: + kfree(adapter); + pci_set_drvdata(pdev, NULL); + +err_disable_device: + pci_disable_device(pdev); + pci_clear_master(pdev); + +err_release_regions: + pci_release_regions(pdev); + pci_set_drvdata(pdev, NULL); + +err_out: + return err; +} + +/* + * "Remove" a device: tear down all kernel and driver state created in the + * "probe" routine and quiesce the device (disable interrupts, etc.). (Note + * that this is called "remove_one" in the PF Driver.) + */ +static void __devexit cxgb4vf_pci_remove(struct pci_dev *pdev) +{ + struct adapter *adapter = pci_get_drvdata(pdev); + + /* + * Tear down driver state associated with device. + */ + if (adapter) { + int pidx; + + /* + * Stop all of our activity. Unregister network port, + * disable interrupts, etc. + */ + for_each_port(adapter, pidx) + if (test_bit(pidx, &adapter->registered_device_map)) + unregister_netdev(adapter->port[pidx]); + t4vf_sge_stop(adapter); + if (adapter->flags & USING_MSIX) { + pci_disable_msix(adapter->pdev); + adapter->flags &= ~USING_MSIX; + } else if (adapter->flags & USING_MSI) { + pci_disable_msi(adapter->pdev); + adapter->flags &= ~USING_MSI; + } + + /* + * Tear down our debugfs entries. + */ + if (adapter->debugfs_root) { + cleanup_debugfs(adapter); + debugfs_remove_recursive(adapter->debugfs_root); + } + + /* + * Free all of the various resources which we've acquired ... + */ + t4vf_free_sge_resources(adapter); + for_each_port(adapter, pidx) { + struct net_device *netdev = adapter->port[pidx]; + struct port_info *pi; + + if (netdev == NULL) + continue; + + pi = netdev_priv(netdev); + t4vf_free_vi(adapter, pi->viid); + free_netdev(netdev); + } + iounmap(adapter->regs); + kfree(adapter); + pci_set_drvdata(pdev, NULL); + } + + /* + * Disable the device and release its PCI resources. + */ + pci_disable_device(pdev); + pci_clear_master(pdev); + pci_release_regions(pdev); +} + +/* + * PCI Device registration data structures. + */ +#define CH_DEVICE(devid, idx) \ + { PCI_VENDOR_ID_CHELSIO, devid, PCI_ANY_ID, PCI_ANY_ID, 0, 0, idx } + +static struct pci_device_id cxgb4vf_pci_tbl[] = { + CH_DEVICE(0xb000, 0), /* PE10K FPGA */ + CH_DEVICE(0x4800, 0), /* T440-dbg */ + CH_DEVICE(0x4801, 0), /* T420-cr */ + CH_DEVICE(0x4802, 0), /* T422-cr */ + { 0, } +}; + +MODULE_DESCRIPTION(DRV_DESC); +MODULE_AUTHOR("Chelsio Communications"); +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_VERSION(DRV_VERSION); +MODULE_DEVICE_TABLE(pci, cxgb4vf_pci_tbl); + +static struct pci_driver cxgb4vf_driver = { + .name = KBUILD_MODNAME, + .id_table = cxgb4vf_pci_tbl, + .probe = cxgb4vf_pci_probe, + .remove = __devexit_p(cxgb4vf_pci_remove), +}; + +/* + * Initialize global driver state. + */ +static int __init cxgb4vf_module_init(void) +{ + int ret; + + /* Debugfs support is optional, just warn if this fails */ + cxgb4vf_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL); + if (!cxgb4vf_debugfs_root) + printk(KERN_WARNING KBUILD_MODNAME ": could not create" + " debugfs entry, continuing\n"); + + ret = pci_register_driver(&cxgb4vf_driver); + if (ret < 0) + debugfs_remove(cxgb4vf_debugfs_root); + return ret; +} + +/* + * Tear down global driver state. + */ +static void __exit cxgb4vf_module_exit(void) +{ + pci_unregister_driver(&cxgb4vf_driver); + debugfs_remove(cxgb4vf_debugfs_root); +} + +module_init(cxgb4vf_module_init); +module_exit(cxgb4vf_module_exit); diff --git a/drivers/net/cxgb4vf/sge.c b/drivers/net/cxgb4vf/sge.c new file mode 100644 index 00000000000..eb5a1c9cb2d --- /dev/null +++ b/drivers/net/cxgb4vf/sge.c @@ -0,0 +1,2454 @@ +/* + * This file is part of the Chelsio T4 PCI-E SR-IOV Virtual Function Ethernet + * driver for Linux. + * + * Copyright (c) 2009-2010 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include <linux/skbuff.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/if_vlan.h> +#include <linux/ip.h> +#include <net/ipv6.h> +#include <net/tcp.h> +#include <linux/dma-mapping.h> + +#include "t4vf_common.h" +#include "t4vf_defs.h" + +#include "../cxgb4/t4_regs.h" +#include "../cxgb4/t4fw_api.h" +#include "../cxgb4/t4_msg.h" + +/* + * Decoded Adapter Parameters. + */ +static u32 FL_PG_ORDER; /* large page allocation size */ +static u32 STAT_LEN; /* length of status page at ring end */ +static u32 PKTSHIFT; /* padding between CPL and packet data */ +static u32 FL_ALIGN; /* response queue message alignment */ + +/* + * Constants ... + */ +enum { + /* + * Egress Queue sizes, producer and consumer indices are all in units + * of Egress Context Units bytes. Note that as far as the hardware is + * concerned, the free list is an Egress Queue (the host produces free + * buffers which the hardware consumes) and free list entries are + * 64-bit PCI DMA addresses. + */ + EQ_UNIT = SGE_EQ_IDXSIZE, + FL_PER_EQ_UNIT = EQ_UNIT / sizeof(__be64), + TXD_PER_EQ_UNIT = EQ_UNIT / sizeof(__be64), + + /* + * Max number of TX descriptors we clean up at a time. Should be + * modest as freeing skbs isn't cheap and it happens while holding + * locks. We just need to free packets faster than they arrive, we + * eventually catch up and keep the amortized cost reasonable. + */ + MAX_TX_RECLAIM = 16, + + /* + * Max number of Rx buffers we replenish at a time. Again keep this + * modest, allocating buffers isn't cheap either. + */ + MAX_RX_REFILL = 16, + + /* + * Period of the Rx queue check timer. This timer is infrequent as it + * has something to do only when the system experiences severe memory + * shortage. + */ + RX_QCHECK_PERIOD = (HZ / 2), + + /* + * Period of the TX queue check timer and the maximum number of TX + * descriptors to be reclaimed by the TX timer. + */ + TX_QCHECK_PERIOD = (HZ / 2), + MAX_TIMER_TX_RECLAIM = 100, + + /* + * An FL with <= FL_STARVE_THRES buffers is starving and a periodic + * timer will attempt to refill it. + */ + FL_STARVE_THRES = 4, + + /* + * Suspend an Ethernet TX queue with fewer available descriptors than + * this. We always want to have room for a maximum sized packet: + * inline immediate data + MAX_SKB_FRAGS. This is the same as + * calc_tx_flits() for a TSO packet with nr_frags == MAX_SKB_FRAGS + * (see that function and its helpers for a description of the + * calculation). + */ + ETHTXQ_MAX_FRAGS = MAX_SKB_FRAGS + 1, + ETHTXQ_MAX_SGL_LEN = ((3 * (ETHTXQ_MAX_FRAGS-1))/2 + + ((ETHTXQ_MAX_FRAGS-1) & 1) + + 2), + ETHTXQ_MAX_HDR = (sizeof(struct fw_eth_tx_pkt_vm_wr) + + sizeof(struct cpl_tx_pkt_lso_core) + + sizeof(struct cpl_tx_pkt_core)) / sizeof(__be64), + ETHTXQ_MAX_FLITS = ETHTXQ_MAX_SGL_LEN + ETHTXQ_MAX_HDR, + + ETHTXQ_STOP_THRES = 1 + DIV_ROUND_UP(ETHTXQ_MAX_FLITS, TXD_PER_EQ_UNIT), + + /* + * Max TX descriptor space we allow for an Ethernet packet to be + * inlined into a WR. This is limited by the maximum value which + * we can specify for immediate data in the firmware Ethernet TX + * Work Request. + */ + MAX_IMM_TX_PKT_LEN = FW_WR_IMMDLEN_MASK, + + /* + * Max size of a WR sent through a control TX queue. + */ + MAX_CTRL_WR_LEN = 256, + + /* + * Maximum amount of data which we'll ever need to inline into a + * TX ring: max(MAX_IMM_TX_PKT_LEN, MAX_CTRL_WR_LEN). + */ + MAX_IMM_TX_LEN = (MAX_IMM_TX_PKT_LEN > MAX_CTRL_WR_LEN + ? MAX_IMM_TX_PKT_LEN + : MAX_CTRL_WR_LEN), + + /* + * For incoming packets less than RX_COPY_THRES, we copy the data into + * an skb rather than referencing the data. We allocate enough + * in-line room in skb's to accommodate pulling in RX_PULL_LEN bytes + * of the data (header). + */ + RX_COPY_THRES = 256, + RX_PULL_LEN = 128, +}; + +/* + * Can't define this in the above enum because PKTSHIFT isn't a constant in + * the VF Driver ... + */ +#define RX_PKT_PULL_LEN (RX_PULL_LEN + PKTSHIFT) + +/* + * Software state per TX descriptor. + */ +struct tx_sw_desc { + struct sk_buff *skb; /* socket buffer of TX data source */ + struct ulptx_sgl *sgl; /* scatter/gather list in TX Queue */ +}; + +/* + * Software state per RX Free List descriptor. We keep track of the allocated + * FL page, its size, and its PCI DMA address (if the page is mapped). The FL + * page size and its PCI DMA mapped state are stored in the low bits of the + * PCI DMA address as per below. + */ +struct rx_sw_desc { + struct page *page; /* Free List page buffer */ + dma_addr_t dma_addr; /* PCI DMA address (if mapped) */ + /* and flags (see below) */ +}; + +/* + * The low bits of rx_sw_desc.dma_addr have special meaning. Note that the + * SGE also uses the low 4 bits to determine the size of the buffer. It uses + * those bits to index into the SGE_FL_BUFFER_SIZE[index] register array. + * Since we only use SGE_FL_BUFFER_SIZE0 and SGE_FL_BUFFER_SIZE1, these low 4 + * bits can only contain a 0 or a 1 to indicate which size buffer we're giving + * to the SGE. Thus, our software state of "is the buffer mapped for DMA" is + * maintained in an inverse sense so the hardware never sees that bit high. + */ +enum { + RX_LARGE_BUF = 1 << 0, /* buffer is SGE_FL_BUFFER_SIZE[1] */ + RX_UNMAPPED_BUF = 1 << 1, /* buffer is not mapped */ +}; + +/** + * get_buf_addr - return DMA buffer address of software descriptor + * @sdesc: pointer to the software buffer descriptor + * + * Return the DMA buffer address of a software descriptor (stripping out + * our low-order flag bits). + */ +static inline dma_addr_t get_buf_addr(const struct rx_sw_desc *sdesc) +{ + return sdesc->dma_addr & ~(dma_addr_t)(RX_LARGE_BUF | RX_UNMAPPED_BUF); +} + +/** + * is_buf_mapped - is buffer mapped for DMA? + * @sdesc: pointer to the software buffer descriptor + * + * Determine whether the buffer associated with a software descriptor in + * mapped for DMA or not. + */ +static inline bool is_buf_mapped(const struct rx_sw_desc *sdesc) +{ + return !(sdesc->dma_addr & RX_UNMAPPED_BUF); +} + +/** + * need_skb_unmap - does the platform need unmapping of sk_buffs? + * + * Returns true if the platfrom needs sk_buff unmapping. The compiler + * optimizes away unecessary code if this returns true. + */ +static inline int need_skb_unmap(void) +{ +#ifdef CONFIG_NEED_DMA_MAP_STATE + return 1; +#else + return 0; +#endif +} + +/** + * txq_avail - return the number of available slots in a TX queue + * @tq: the TX queue + * + * Returns the number of available descriptors in a TX queue. + */ +static inline unsigned int txq_avail(const struct sge_txq *tq) +{ + return tq->size - 1 - tq->in_use; +} + +/** + * fl_cap - return the capacity of a Free List + * @fl: the Free List + * + * Returns the capacity of a Free List. The capacity is less than the + * size because an Egress Queue Index Unit worth of descriptors needs to + * be left unpopulated, otherwise the Producer and Consumer indices PIDX + * and CIDX will match and the hardware will think the FL is empty. + */ +static inline unsigned int fl_cap(const struct sge_fl *fl) +{ + return fl->size - FL_PER_EQ_UNIT; +} + +/** + * fl_starving - return whether a Free List is starving. + * @fl: the Free List + * + * Tests specified Free List to see whether the number of buffers + * available to the hardware has falled below our "starvation" + * threshhold. + */ +static inline bool fl_starving(const struct sge_fl *fl) +{ + return fl->avail - fl->pend_cred <= FL_STARVE_THRES; +} + +/** + * map_skb - map an skb for DMA to the device + * @dev: the egress net device + * @skb: the packet to map + * @addr: a pointer to the base of the DMA mapping array + * + * Map an skb for DMA to the device and return an array of DMA addresses. + */ +static int map_skb(struct device *dev, const struct sk_buff *skb, + dma_addr_t *addr) +{ + const skb_frag_t *fp, *end; + const struct skb_shared_info *si; + + *addr = dma_map_single(dev, skb->data, skb_headlen(skb), DMA_TO_DEVICE); + if (dma_mapping_error(dev, *addr)) + goto out_err; + + si = skb_shinfo(skb); + end = &si->frags[si->nr_frags]; + for (fp = si->frags; fp < end; fp++) { + *++addr = dma_map_page(dev, fp->page, fp->page_offset, fp->size, + DMA_TO_DEVICE); + if (dma_mapping_error(dev, *addr)) + goto unwind; + } + return 0; + +unwind: + while (fp-- > si->frags) + dma_unmap_page(dev, *--addr, fp->size, DMA_TO_DEVICE); + dma_unmap_single(dev, addr[-1], skb_headlen(skb), DMA_TO_DEVICE); + +out_err: + return -ENOMEM; +} + +static void unmap_sgl(struct device *dev, const struct sk_buff *skb, + const struct ulptx_sgl *sgl, const struct sge_txq *tq) +{ + const struct ulptx_sge_pair *p; + unsigned int nfrags = skb_shinfo(skb)->nr_frags; + + if (likely(skb_headlen(skb))) + dma_unmap_single(dev, be64_to_cpu(sgl->addr0), + be32_to_cpu(sgl->len0), DMA_TO_DEVICE); + else { + dma_unmap_page(dev, be64_to_cpu(sgl->addr0), + be32_to_cpu(sgl->len0), DMA_TO_DEVICE); + nfrags--; + } + + /* + * the complexity below is because of the possibility of a wrap-around + * in the middle of an SGL + */ + for (p = sgl->sge; nfrags >= 2; nfrags -= 2) { + if (likely((u8 *)(p + 1) <= (u8 *)tq->stat)) { +unmap: + dma_unmap_page(dev, be64_to_cpu(p->addr[0]), + be32_to_cpu(p->len[0]), DMA_TO_DEVICE); + dma_unmap_page(dev, be64_to_cpu(p->addr[1]), + be32_to_cpu(p->len[1]), DMA_TO_DEVICE); + p++; + } else if ((u8 *)p == (u8 *)tq->stat) { + p = (const struct ulptx_sge_pair *)tq->desc; + goto unmap; + } else if ((u8 *)p + 8 == (u8 *)tq->stat) { + const __be64 *addr = (const __be64 *)tq->desc; + + dma_unmap_page(dev, be64_to_cpu(addr[0]), + be32_to_cpu(p->len[0]), DMA_TO_DEVICE); + dma_unmap_page(dev, be64_to_cpu(addr[1]), + be32_to_cpu(p->len[1]), DMA_TO_DEVICE); + p = (const struct ulptx_sge_pair *)&addr[2]; + } else { + const __be64 *addr = (const __be64 *)tq->desc; + + dma_unmap_page(dev, be64_to_cpu(p->addr[0]), + be32_to_cpu(p->len[0]), DMA_TO_DEVICE); + dma_unmap_page(dev, be64_to_cpu(addr[0]), + be32_to_cpu(p->len[1]), DMA_TO_DEVICE); + p = (const struct ulptx_sge_pair *)&addr[1]; + } + } + if (nfrags) { + __be64 addr; + + if ((u8 *)p == (u8 *)tq->stat) + p = (const struct ulptx_sge_pair *)tq->desc; + addr = ((u8 *)p + 16 <= (u8 *)tq->stat + ? p->addr[0] + : *(const __be64 *)tq->desc); + dma_unmap_page(dev, be64_to_cpu(addr), be32_to_cpu(p->len[0]), + DMA_TO_DEVICE); + } +} + +/** + * free_tx_desc - reclaims TX descriptors and their buffers + * @adapter: the adapter + * @tq: the TX queue to reclaim descriptors from + * @n: the number of descriptors to reclaim + * @unmap: whether the buffers should be unmapped for DMA + * + * Reclaims TX descriptors from an SGE TX queue and frees the associated + * TX buffers. Called with the TX queue lock held. + */ +static void free_tx_desc(struct adapter *adapter, struct sge_txq *tq, + unsigned int n, bool unmap) +{ + struct tx_sw_desc *sdesc; + unsigned int cidx = tq->cidx; + struct device *dev = adapter->pdev_dev; + + const int need_unmap = need_skb_unmap() && unmap; + + sdesc = &tq->sdesc[cidx]; + while (n--) { + /* + * If we kept a reference to the original TX skb, we need to + * unmap it from PCI DMA space (if required) and free it. + */ + if (sdesc->skb) { + if (need_unmap) + unmap_sgl(dev, sdesc->skb, sdesc->sgl, tq); + kfree_skb(sdesc->skb); + sdesc->skb = NULL; + } + + sdesc++; + if (++cidx == tq->size) { + cidx = 0; + sdesc = tq->sdesc; + } + } + tq->cidx = cidx; +} + +/* + * Return the number of reclaimable descriptors in a TX queue. + */ +static inline int reclaimable(const struct sge_txq *tq) +{ + int hw_cidx = be16_to_cpu(tq->stat->cidx); + int reclaimable = hw_cidx - tq->cidx; + if (reclaimable < 0) + reclaimable += tq->size; + return reclaimable; +} + +/** + * reclaim_completed_tx - reclaims completed TX descriptors + * @adapter: the adapter + * @tq: the TX queue to reclaim completed descriptors from + * @unmap: whether the buffers should be unmapped for DMA + * + * Reclaims TX descriptors that the SGE has indicated it has processed, + * and frees the associated buffers if possible. Called with the TX + * queue locked. + */ +static inline void reclaim_completed_tx(struct adapter *adapter, + struct sge_txq *tq, + bool unmap) +{ + int avail = reclaimable(tq); + + if (avail) { + /* + * Limit the amount of clean up work we do at a time to keep + * the TX lock hold time O(1). + */ + if (avail > MAX_TX_RECLAIM) + avail = MAX_TX_RECLAIM; + + free_tx_desc(adapter, tq, avail, unmap); + tq->in_use -= avail; + } +} + +/** + * get_buf_size - return the size of an RX Free List buffer. + * @sdesc: pointer to the software buffer descriptor + */ +static inline int get_buf_size(const struct rx_sw_desc *sdesc) +{ + return FL_PG_ORDER > 0 && (sdesc->dma_addr & RX_LARGE_BUF) + ? (PAGE_SIZE << FL_PG_ORDER) + : PAGE_SIZE; +} + +/** + * free_rx_bufs - free RX buffers on an SGE Free List + * @adapter: the adapter + * @fl: the SGE Free List to free buffers from + * @n: how many buffers to free + * + * Release the next @n buffers on an SGE Free List RX queue. The + * buffers must be made inaccessible to hardware before calling this + * function. + */ +static void free_rx_bufs(struct adapter *adapter, struct sge_fl *fl, int n) +{ + while (n--) { + struct rx_sw_desc *sdesc = &fl->sdesc[fl->cidx]; + + if (is_buf_mapped(sdesc)) + dma_unmap_page(adapter->pdev_dev, get_buf_addr(sdesc), + get_buf_size(sdesc), PCI_DMA_FROMDEVICE); + put_page(sdesc->page); + sdesc->page = NULL; + if (++fl->cidx == fl->size) + fl->cidx = 0; + fl->avail--; + } +} + +/** + * unmap_rx_buf - unmap the current RX buffer on an SGE Free List + * @adapter: the adapter + * @fl: the SGE Free List + * + * Unmap the current buffer on an SGE Free List RX queue. The + * buffer must be made inaccessible to HW before calling this function. + * + * This is similar to @free_rx_bufs above but does not free the buffer. + * Do note that the FL still loses any further access to the buffer. + * This is used predominantly to "transfer ownership" of an FL buffer + * to another entity (typically an skb's fragment list). + */ +static void unmap_rx_buf(struct adapter *adapter, struct sge_fl *fl) +{ + struct rx_sw_desc *sdesc = &fl->sdesc[fl->cidx]; + + if (is_buf_mapped(sdesc)) + dma_unmap_page(adapter->pdev_dev, get_buf_addr(sdesc), + get_buf_size(sdesc), PCI_DMA_FROMDEVICE); + sdesc->page = NULL; + if (++fl->cidx == fl->size) + fl->cidx = 0; + fl->avail--; +} + +/** + * ring_fl_db - righ doorbell on free list + * @adapter: the adapter + * @fl: the Free List whose doorbell should be rung ... + * + * Tell the Scatter Gather Engine that there are new free list entries + * available. + */ +static inline void ring_fl_db(struct adapter *adapter, struct sge_fl *fl) +{ + /* + * The SGE keeps track of its Producer and Consumer Indices in terms + * of Egress Queue Units so we can only tell it about integral numbers + * of multiples of Free List Entries per Egress Queue Units ... + */ + if (fl->pend_cred >= FL_PER_EQ_UNIT) { + wmb(); + t4_write_reg(adapter, T4VF_SGE_BASE_ADDR + SGE_VF_KDOORBELL, + DBPRIO | + QID(fl->cntxt_id) | + PIDX(fl->pend_cred / FL_PER_EQ_UNIT)); + fl->pend_cred %= FL_PER_EQ_UNIT; + } +} + +/** + * set_rx_sw_desc - initialize software RX buffer descriptor + * @sdesc: pointer to the softwore RX buffer descriptor + * @page: pointer to the page data structure backing the RX buffer + * @dma_addr: PCI DMA address (possibly with low-bit flags) + */ +static inline void set_rx_sw_desc(struct rx_sw_desc *sdesc, struct page *page, + dma_addr_t dma_addr) +{ + sdesc->page = page; + sdesc->dma_addr = dma_addr; +} + +/* + * Support for poisoning RX buffers ... + */ +#define POISON_BUF_VAL -1 + +static inline void poison_buf(struct page *page, size_t sz) +{ +#if POISON_BUF_VAL >= 0 + memset(page_address(page), POISON_BUF_VAL, sz); +#endif +} + +/** + * refill_fl - refill an SGE RX buffer ring + * @adapter: the adapter + * @fl: the Free List ring to refill + * @n: the number of new buffers to allocate + * @gfp: the gfp flags for the allocations + * + * (Re)populate an SGE free-buffer queue with up to @n new packet buffers, + * allocated with the supplied gfp flags. The caller must assure that + * @n does not exceed the queue's capacity -- i.e. (cidx == pidx) _IN + * EGRESS QUEUE UNITS_ indicates an empty Free List! Returns the number + * of buffers allocated. If afterwards the queue is found critically low, + * mark it as starving in the bitmap of starving FLs. + */ +static unsigned int refill_fl(struct adapter *adapter, struct sge_fl *fl, + int n, gfp_t gfp) +{ + struct page *page; + dma_addr_t dma_addr; + unsigned int cred = fl->avail; + __be64 *d = &fl->desc[fl->pidx]; + struct rx_sw_desc *sdesc = &fl->sdesc[fl->pidx]; + + /* + * Sanity: ensure that the result of adding n Free List buffers + * won't result in wrapping the SGE's Producer Index around to + * it's Consumer Index thereby indicating an empty Free List ... + */ + BUG_ON(fl->avail + n > fl->size - FL_PER_EQ_UNIT); + + /* + * If we support large pages, prefer large buffers and fail over to + * small pages if we can't allocate large pages to satisfy the refill. + * If we don't support large pages, drop directly into the small page + * allocation code. + */ + if (FL_PG_ORDER == 0) + goto alloc_small_pages; + + while (n) { + page = alloc_pages(gfp | __GFP_COMP | __GFP_NOWARN, + FL_PG_ORDER); + if (unlikely(!page)) { + /* + * We've failed inour attempt to allocate a "large + * page". Fail over to the "small page" allocation + * below. + */ + fl->large_alloc_failed++; + break; + } + poison_buf(page, PAGE_SIZE << FL_PG_ORDER); + + dma_addr = dma_map_page(adapter->pdev_dev, page, 0, + PAGE_SIZE << FL_PG_ORDER, + PCI_DMA_FROMDEVICE); + if (unlikely(dma_mapping_error(adapter->pdev_dev, dma_addr))) { + /* + * We've run out of DMA mapping space. Free up the + * buffer and return with what we've managed to put + * into the free list. We don't want to fail over to + * the small page allocation below in this case + * because DMA mapping resources are typically + * critical resources once they become scarse. + */ + __free_pages(page, FL_PG_ORDER); + goto out; + } + dma_addr |= RX_LARGE_BUF; + *d++ = cpu_to_be64(dma_addr); + + set_rx_sw_desc(sdesc, page, dma_addr); + sdesc++; + + fl->avail++; + if (++fl->pidx == fl->size) { + fl->pidx = 0; + sdesc = fl->sdesc; + d = fl->desc; + } + n--; + } + +alloc_small_pages: + while (n--) { + page = __netdev_alloc_page(adapter->port[0], + gfp | __GFP_NOWARN); + if (unlikely(!page)) { + fl->alloc_failed++; + break; + } + poison_buf(page, PAGE_SIZE); + + dma_addr = dma_map_page(adapter->pdev_dev, page, 0, PAGE_SIZE, + PCI_DMA_FROMDEVICE); + if (unlikely(dma_mapping_error(adapter->pdev_dev, dma_addr))) { + netdev_free_page(adapter->port[0], page); + break; + } + *d++ = cpu_to_be64(dma_addr); + + set_rx_sw_desc(sdesc, page, dma_addr); + sdesc++; + + fl->avail++; + if (++fl->pidx == fl->size) { + fl->pidx = 0; + sdesc = fl->sdesc; + d = fl->desc; + } + } + +out: + /* + * Update our accounting state to incorporate the new Free List + * buffers, tell the hardware about them and return the number of + * bufers which we were able to allocate. + */ + cred = fl->avail - cred; + fl->pend_cred += cred; + ring_fl_db(adapter, fl); + + if (unlikely(fl_starving(fl))) { + smp_wmb(); + set_bit(fl->cntxt_id, adapter->sge.starving_fl); + } + + return cred; +} + +/* + * Refill a Free List to its capacity or the Maximum Refill Increment, + * whichever is smaller ... + */ +static inline void __refill_fl(struct adapter *adapter, struct sge_fl *fl) +{ + refill_fl(adapter, fl, + min((unsigned int)MAX_RX_REFILL, fl_cap(fl) - fl->avail), + GFP_ATOMIC); +} + +/** + * alloc_ring - allocate resources for an SGE descriptor ring + * @dev: the PCI device's core device + * @nelem: the number of descriptors + * @hwsize: the size of each hardware descriptor + * @swsize: the size of each software descriptor + * @busaddrp: the physical PCI bus address of the allocated ring + * @swringp: return address pointer for software ring + * @stat_size: extra space in hardware ring for status information + * + * Allocates resources for an SGE descriptor ring, such as TX queues, + * free buffer lists, response queues, etc. Each SGE ring requires + * space for its hardware descriptors plus, optionally, space for software + * state associated with each hardware entry (the metadata). The function + * returns three values: the virtual address for the hardware ring (the + * return value of the function), the PCI bus address of the hardware + * ring (in *busaddrp), and the address of the software ring (in swringp). + * Both the hardware and software rings are returned zeroed out. + */ +static void *alloc_ring(struct device *dev, size_t nelem, size_t hwsize, + size_t swsize, dma_addr_t *busaddrp, void *swringp, + size_t stat_size) +{ + /* + * Allocate the hardware ring and PCI DMA bus address space for said. + */ + size_t hwlen = nelem * hwsize + stat_size; + void *hwring = dma_alloc_coherent(dev, hwlen, busaddrp, GFP_KERNEL); + + if (!hwring) + return NULL; + + /* + * If the caller wants a software ring, allocate it and return a + * pointer to it in *swringp. + */ + BUG_ON((swsize != 0) != (swringp != NULL)); + if (swsize) { + void *swring = kcalloc(nelem, swsize, GFP_KERNEL); + + if (!swring) { + dma_free_coherent(dev, hwlen, hwring, *busaddrp); + return NULL; + } + *(void **)swringp = swring; + } + + /* + * Zero out the hardware ring and return its address as our function + * value. + */ + memset(hwring, 0, hwlen); + return hwring; +} + +/** + * sgl_len - calculates the size of an SGL of the given capacity + * @n: the number of SGL entries + * + * Calculates the number of flits (8-byte units) needed for a Direct + * Scatter/Gather List that can hold the given number of entries. + */ +static inline unsigned int sgl_len(unsigned int n) +{ + /* + * A Direct Scatter Gather List uses 32-bit lengths and 64-bit PCI DMA + * addresses. The DSGL Work Request starts off with a 32-bit DSGL + * ULPTX header, then Length0, then Address0, then, for 1 <= i <= N, + * repeated sequences of { Length[i], Length[i+1], Address[i], + * Address[i+1] } (this ensures that all addresses are on 64-bit + * boundaries). If N is even, then Length[N+1] should be set to 0 and + * Address[N+1] is omitted. + * + * The following calculation incorporates all of the above. It's + * somewhat hard to follow but, briefly: the "+2" accounts for the + * first two flits which include the DSGL header, Length0 and + * Address0; the "(3*(n-1))/2" covers the main body of list entries (3 + * flits for every pair of the remaining N) +1 if (n-1) is odd; and + * finally the "+((n-1)&1)" adds the one remaining flit needed if + * (n-1) is odd ... + */ + n--; + return (3 * n) / 2 + (n & 1) + 2; +} + +/** + * flits_to_desc - returns the num of TX descriptors for the given flits + * @flits: the number of flits + * + * Returns the number of TX descriptors needed for the supplied number + * of flits. + */ +static inline unsigned int flits_to_desc(unsigned int flits) +{ + BUG_ON(flits > SGE_MAX_WR_LEN / sizeof(__be64)); + return DIV_ROUND_UP(flits, TXD_PER_EQ_UNIT); +} + +/** + * is_eth_imm - can an Ethernet packet be sent as immediate data? + * @skb: the packet + * + * Returns whether an Ethernet packet is small enough to fit completely as + * immediate data. + */ +static inline int is_eth_imm(const struct sk_buff *skb) +{ + /* + * The VF Driver uses the FW_ETH_TX_PKT_VM_WR firmware Work Request + * which does not accommodate immediate data. We could dike out all + * of the support code for immediate data but that would tie our hands + * too much if we ever want to enhace the firmware. It would also + * create more differences between the PF and VF Drivers. + */ + return false; +} + +/** + * calc_tx_flits - calculate the number of flits for a packet TX WR + * @skb: the packet + * + * Returns the number of flits needed for a TX Work Request for the + * given Ethernet packet, including the needed WR and CPL headers. + */ +static inline unsigned int calc_tx_flits(const struct sk_buff *skb) +{ + unsigned int flits; + + /* + * If the skb is small enough, we can pump it out as a work request + * with only immediate data. In that case we just have to have the + * TX Packet header plus the skb data in the Work Request. + */ + if (is_eth_imm(skb)) + return DIV_ROUND_UP(skb->len + sizeof(struct cpl_tx_pkt), + sizeof(__be64)); + + /* + * Otherwise, we're going to have to construct a Scatter gather list + * of the skb body and fragments. We also include the flits necessary + * for the TX Packet Work Request and CPL. We always have a firmware + * Write Header (incorporated as part of the cpl_tx_pkt_lso and + * cpl_tx_pkt structures), followed by either a TX Packet Write CPL + * message or, if we're doing a Large Send Offload, an LSO CPL message + * with an embeded TX Packet Write CPL message. + */ + flits = sgl_len(skb_shinfo(skb)->nr_frags + 1); + if (skb_shinfo(skb)->gso_size) + flits += (sizeof(struct fw_eth_tx_pkt_vm_wr) + + sizeof(struct cpl_tx_pkt_lso_core) + + sizeof(struct cpl_tx_pkt_core)) / sizeof(__be64); + else + flits += (sizeof(struct fw_eth_tx_pkt_vm_wr) + + sizeof(struct cpl_tx_pkt_core)) / sizeof(__be64); + return flits; +} + +/** + * write_sgl - populate a Scatter/Gather List for a packet + * @skb: the packet + * @tq: the TX queue we are writing into + * @sgl: starting location for writing the SGL + * @end: points right after the end of the SGL + * @start: start offset into skb main-body data to include in the SGL + * @addr: the list of DMA bus addresses for the SGL elements + * + * Generates a Scatter/Gather List for the buffers that make up a packet. + * The caller must provide adequate space for the SGL that will be written. + * The SGL includes all of the packet's page fragments and the data in its + * main body except for the first @start bytes. @pos must be 16-byte + * aligned and within a TX descriptor with available space. @end points + * write after the end of the SGL but does not account for any potential + * wrap around, i.e., @end > @tq->stat. + */ +static void write_sgl(const struct sk_buff *skb, struct sge_txq *tq, + struct ulptx_sgl *sgl, u64 *end, unsigned int start, + const dma_addr_t *addr) +{ + unsigned int i, len; + struct ulptx_sge_pair *to; + const struct skb_shared_info *si = skb_shinfo(skb); + unsigned int nfrags = si->nr_frags; + struct ulptx_sge_pair buf[MAX_SKB_FRAGS / 2 + 1]; + + len = skb_headlen(skb) - start; + if (likely(len)) { + sgl->len0 = htonl(len); + sgl->addr0 = cpu_to_be64(addr[0] + start); + nfrags++; + } else { + sgl->len0 = htonl(si->frags[0].size); + sgl->addr0 = cpu_to_be64(addr[1]); + } + + sgl->cmd_nsge = htonl(ULPTX_CMD(ULP_TX_SC_DSGL) | + ULPTX_NSGE(nfrags)); + if (likely(--nfrags == 0)) + return; + /* + * Most of the complexity below deals with the possibility we hit the + * end of the queue in the middle of writing the SGL. For this case + * only we create the SGL in a temporary buffer and then copy it. + */ + to = (u8 *)end > (u8 *)tq->stat ? buf : sgl->sge; + + for (i = (nfrags != si->nr_frags); nfrags >= 2; nfrags -= 2, to++) { + to->len[0] = cpu_to_be32(si->frags[i].size); + to->len[1] = cpu_to_be32(si->frags[++i].size); + to->addr[0] = cpu_to_be64(addr[i]); + to->addr[1] = cpu_to_be64(addr[++i]); + } + if (nfrags) { + to->len[0] = cpu_to_be32(si->frags[i].size); + to->len[1] = cpu_to_be32(0); + to->addr[0] = cpu_to_be64(addr[i + 1]); + } + if (unlikely((u8 *)end > (u8 *)tq->stat)) { + unsigned int part0 = (u8 *)tq->stat - (u8 *)sgl->sge, part1; + + if (likely(part0)) + memcpy(sgl->sge, buf, part0); + part1 = (u8 *)end - (u8 *)tq->stat; + memcpy(tq->desc, (u8 *)buf + part0, part1); + end = (void *)tq->desc + part1; + } + if ((uintptr_t)end & 8) /* 0-pad to multiple of 16 */ + *(u64 *)end = 0; +} + +/** + * check_ring_tx_db - check and potentially ring a TX queue's doorbell + * @adapter: the adapter + * @tq: the TX queue + * @n: number of new descriptors to give to HW + * + * Ring the doorbel for a TX queue. + */ +static inline void ring_tx_db(struct adapter *adapter, struct sge_txq *tq, + int n) +{ + /* + * Warn if we write doorbells with the wrong priority and write + * descriptors before telling HW. + */ + WARN_ON((QID(tq->cntxt_id) | PIDX(n)) & DBPRIO); + wmb(); + t4_write_reg(adapter, T4VF_SGE_BASE_ADDR + SGE_VF_KDOORBELL, + QID(tq->cntxt_id) | PIDX(n)); +} + +/** + * inline_tx_skb - inline a packet's data into TX descriptors + * @skb: the packet + * @tq: the TX queue where the packet will be inlined + * @pos: starting position in the TX queue to inline the packet + * + * Inline a packet's contents directly into TX descriptors, starting at + * the given position within the TX DMA ring. + * Most of the complexity of this operation is dealing with wrap arounds + * in the middle of the packet we want to inline. + */ +static void inline_tx_skb(const struct sk_buff *skb, const struct sge_txq *tq, + void *pos) +{ + u64 *p; + int left = (void *)tq->stat - pos; + + if (likely(skb->len <= left)) { + if (likely(!skb->data_len)) + skb_copy_from_linear_data(skb, pos, skb->len); + else + skb_copy_bits(skb, 0, pos, skb->len); + pos += skb->len; + } else { + skb_copy_bits(skb, 0, pos, left); + skb_copy_bits(skb, left, tq->desc, skb->len - left); + pos = (void *)tq->desc + (skb->len - left); + } + + /* 0-pad to multiple of 16 */ + p = PTR_ALIGN(pos, 8); + if ((uintptr_t)p & 8) + *p = 0; +} + +/* + * Figure out what HW csum a packet wants and return the appropriate control + * bits. + */ +static u64 hwcsum(const struct sk_buff *skb) +{ + int csum_type; + const struct iphdr *iph = ip_hdr(skb); + + if (iph->version == 4) { + if (iph->protocol == IPPROTO_TCP) + csum_type = TX_CSUM_TCPIP; + else if (iph->protocol == IPPROTO_UDP) + csum_type = TX_CSUM_UDPIP; + else { +nocsum: + /* + * unknown protocol, disable HW csum + * and hope a bad packet is detected + */ + return TXPKT_L4CSUM_DIS; + } + } else { + /* + * this doesn't work with extension headers + */ + const struct ipv6hdr *ip6h = (const struct ipv6hdr *)iph; + + if (ip6h->nexthdr == IPPROTO_TCP) + csum_type = TX_CSUM_TCPIP6; + else if (ip6h->nexthdr == IPPROTO_UDP) + csum_type = TX_CSUM_UDPIP6; + else + goto nocsum; + } + + if (likely(csum_type >= TX_CSUM_TCPIP)) + return TXPKT_CSUM_TYPE(csum_type) | + TXPKT_IPHDR_LEN(skb_network_header_len(skb)) | + TXPKT_ETHHDR_LEN(skb_network_offset(skb) - ETH_HLEN); + else { + int start = skb_transport_offset(skb); + + return TXPKT_CSUM_TYPE(csum_type) | + TXPKT_CSUM_START(start) | + TXPKT_CSUM_LOC(start + skb->csum_offset); + } +} + +/* + * Stop an Ethernet TX queue and record that state change. + */ +static void txq_stop(struct sge_eth_txq *txq) +{ + netif_tx_stop_queue(txq->txq); + txq->q.stops++; +} + +/* + * Advance our software state for a TX queue by adding n in use descriptors. + */ +static inline void txq_advance(struct sge_txq *tq, unsigned int n) +{ + tq->in_use += n; + tq->pidx += n; + if (tq->pidx >= tq->size) + tq->pidx -= tq->size; +} + +/** + * t4vf_eth_xmit - add a packet to an Ethernet TX queue + * @skb: the packet + * @dev: the egress net device + * + * Add a packet to an SGE Ethernet TX queue. Runs with softirqs disabled. + */ +int t4vf_eth_xmit(struct sk_buff *skb, struct net_device *dev) +{ + u32 wr_mid; + u64 cntrl, *end; + int qidx, credits; + unsigned int flits, ndesc; + struct adapter *adapter; + struct sge_eth_txq *txq; + const struct port_info *pi; + struct fw_eth_tx_pkt_vm_wr *wr; + struct cpl_tx_pkt_core *cpl; + const struct skb_shared_info *ssi; + dma_addr_t addr[MAX_SKB_FRAGS + 1]; + const size_t fw_hdr_copy_len = (sizeof(wr->ethmacdst) + + sizeof(wr->ethmacsrc) + + sizeof(wr->ethtype) + + sizeof(wr->vlantci)); + + /* + * The chip minimum packet length is 10 octets but the firmware + * command that we are using requires that we copy the Ethernet header + * (including the VLAN tag) into the header so we reject anything + * smaller than that ... + */ + if (unlikely(skb->len < fw_hdr_copy_len)) + goto out_free; + + /* + * Figure out which TX Queue we're going to use. + */ + pi = netdev_priv(dev); + adapter = pi->adapter; + qidx = skb_get_queue_mapping(skb); + BUG_ON(qidx >= pi->nqsets); + txq = &adapter->sge.ethtxq[pi->first_qset + qidx]; + + /* + * Take this opportunity to reclaim any TX Descriptors whose DMA + * transfers have completed. + */ + reclaim_completed_tx(adapter, &txq->q, true); + + /* + * Calculate the number of flits and TX Descriptors we're going to + * need along with how many TX Descriptors will be left over after + * we inject our Work Request. + */ + flits = calc_tx_flits(skb); + ndesc = flits_to_desc(flits); + credits = txq_avail(&txq->q) - ndesc; + + if (unlikely(credits < 0)) { + /* + * Not enough room for this packet's Work Request. Stop the + * TX Queue and return a "busy" condition. The queue will get + * started later on when the firmware informs us that space + * has opened up. + */ + txq_stop(txq); + dev_err(adapter->pdev_dev, + "%s: TX ring %u full while queue awake!\n", + dev->name, qidx); + return NETDEV_TX_BUSY; + } + + if (!is_eth_imm(skb) && + unlikely(map_skb(adapter->pdev_dev, skb, addr) < 0)) { + /* + * We need to map the skb into PCI DMA space (because it can't + * be in-lined directly into the Work Request) and the mapping + * operation failed. Record the error and drop the packet. + */ + txq->mapping_err++; + goto out_free; + } + + wr_mid = FW_WR_LEN16(DIV_ROUND_UP(flits, 2)); + if (unlikely(credits < ETHTXQ_STOP_THRES)) { + /* + * After we're done injecting the Work Request for this + * packet, we'll be below our "stop threshhold" so stop the TX + * Queue now and schedule a request for an SGE Egress Queue + * Update message. The queue will get started later on when + * the firmware processes this Work Request and sends us an + * Egress Queue Status Update message indicating that space + * has opened up. + */ + txq_stop(txq); + wr_mid |= FW_WR_EQUEQ | FW_WR_EQUIQ; + } + + /* + * Start filling in our Work Request. Note that we do _not_ handle + * the WR Header wrapping around the TX Descriptor Ring. If our + * maximum header size ever exceeds one TX Descriptor, we'll need to + * do something else here. + */ + BUG_ON(DIV_ROUND_UP(ETHTXQ_MAX_HDR, TXD_PER_EQ_UNIT) > 1); + wr = (void *)&txq->q.desc[txq->q.pidx]; + wr->equiq_to_len16 = cpu_to_be32(wr_mid); + wr->r3[0] = cpu_to_be64(0); + wr->r3[1] = cpu_to_be64(0); + skb_copy_from_linear_data(skb, (void *)wr->ethmacdst, fw_hdr_copy_len); + end = (u64 *)wr + flits; + + /* + * If this is a Large Send Offload packet we'll put in an LSO CPL + * message with an encapsulated TX Packet CPL message. Otherwise we + * just use a TX Packet CPL message. + */ + ssi = skb_shinfo(skb); + if (ssi->gso_size) { + struct cpl_tx_pkt_lso_core *lso = (void *)(wr + 1); + bool v6 = (ssi->gso_type & SKB_GSO_TCPV6) != 0; + int l3hdr_len = skb_network_header_len(skb); + int eth_xtra_len = skb_network_offset(skb) - ETH_HLEN; + + wr->op_immdlen = + cpu_to_be32(FW_WR_OP(FW_ETH_TX_PKT_VM_WR) | + FW_WR_IMMDLEN(sizeof(*lso) + + sizeof(*cpl))); + /* + * Fill in the LSO CPL message. + */ + lso->lso_ctrl = + cpu_to_be32(LSO_OPCODE(CPL_TX_PKT_LSO) | + LSO_FIRST_SLICE | + LSO_LAST_SLICE | + LSO_IPV6(v6) | + LSO_ETHHDR_LEN(eth_xtra_len/4) | + LSO_IPHDR_LEN(l3hdr_len/4) | + LSO_TCPHDR_LEN(tcp_hdr(skb)->doff)); + lso->ipid_ofst = cpu_to_be16(0); + lso->mss = cpu_to_be16(ssi->gso_size); + lso->seqno_offset = cpu_to_be32(0); + lso->len = cpu_to_be32(skb->len); + + /* + * Set up TX Packet CPL pointer, control word and perform + * accounting. + */ + cpl = (void *)(lso + 1); + cntrl = (TXPKT_CSUM_TYPE(v6 ? TX_CSUM_TCPIP6 : TX_CSUM_TCPIP) | + TXPKT_IPHDR_LEN(l3hdr_len) | + TXPKT_ETHHDR_LEN(eth_xtra_len)); + txq->tso++; + txq->tx_cso += ssi->gso_segs; + } else { + int len; + + len = is_eth_imm(skb) ? skb->len + sizeof(*cpl) : sizeof(*cpl); + wr->op_immdlen = + cpu_to_be32(FW_WR_OP(FW_ETH_TX_PKT_VM_WR) | + FW_WR_IMMDLEN(len)); + + /* + * Set up TX Packet CPL pointer, control word and perform + * accounting. + */ + cpl = (void *)(wr + 1); + if (skb->ip_summed == CHECKSUM_PARTIAL) { + cntrl = hwcsum(skb) | TXPKT_IPCSUM_DIS; + txq->tx_cso++; + } else + cntrl = TXPKT_L4CSUM_DIS | TXPKT_IPCSUM_DIS; + } + + /* + * If there's a VLAN tag present, add that to the list of things to + * do in this Work Request. + */ + if (vlan_tx_tag_present(skb)) { + txq->vlan_ins++; + cntrl |= TXPKT_VLAN_VLD | TXPKT_VLAN(vlan_tx_tag_get(skb)); + } + + /* + * Fill in the TX Packet CPL message header. + */ + cpl->ctrl0 = cpu_to_be32(TXPKT_OPCODE(CPL_TX_PKT_XT) | + TXPKT_INTF(pi->port_id) | + TXPKT_PF(0)); + cpl->pack = cpu_to_be16(0); + cpl->len = cpu_to_be16(skb->len); + cpl->ctrl1 = cpu_to_be64(cntrl); + +#ifdef T4_TRACE + T4_TRACE5(adapter->tb[txq->q.cntxt_id & 7], + "eth_xmit: ndesc %u, credits %u, pidx %u, len %u, frags %u", + ndesc, credits, txq->q.pidx, skb->len, ssi->nr_frags); +#endif + + /* + * Fill in the body of the TX Packet CPL message with either in-lined + * data or a Scatter/Gather List. + */ + if (is_eth_imm(skb)) { + /* + * In-line the packet's data and free the skb since we don't + * need it any longer. + */ + inline_tx_skb(skb, &txq->q, cpl + 1); + dev_kfree_skb(skb); + } else { + /* + * Write the skb's Scatter/Gather list into the TX Packet CPL + * message and retain a pointer to the skb so we can free it + * later when its DMA completes. (We store the skb pointer + * in the Software Descriptor corresponding to the last TX + * Descriptor used by the Work Request.) + * + * The retained skb will be freed when the corresponding TX + * Descriptors are reclaimed after their DMAs complete. + * However, this could take quite a while since, in general, + * the hardware is set up to be lazy about sending DMA + * completion notifications to us and we mostly perform TX + * reclaims in the transmit routine. + * + * This is good for performamce but means that we rely on new + * TX packets arriving to run the destructors of completed + * packets, which open up space in their sockets' send queues. + * Sometimes we do not get such new packets causing TX to + * stall. A single UDP transmitter is a good example of this + * situation. We have a clean up timer that periodically + * reclaims completed packets but it doesn't run often enough + * (nor do we want it to) to prevent lengthy stalls. A + * solution to this problem is to run the destructor early, + * after the packet is queued but before it's DMAd. A con is + * that we lie to socket memory accounting, but the amount of + * extra memory is reasonable (limited by the number of TX + * descriptors), the packets do actually get freed quickly by + * new packets almost always, and for protocols like TCP that + * wait for acks to really free up the data the extra memory + * is even less. On the positive side we run the destructors + * on the sending CPU rather than on a potentially different + * completing CPU, usually a good thing. + * + * Run the destructor before telling the DMA engine about the + * packet to make sure it doesn't complete and get freed + * prematurely. + */ + struct ulptx_sgl *sgl = (struct ulptx_sgl *)(cpl + 1); + struct sge_txq *tq = &txq->q; + int last_desc; + + /* + * If the Work Request header was an exact multiple of our TX + * Descriptor length, then it's possible that the starting SGL + * pointer lines up exactly with the end of our TX Descriptor + * ring. If that's the case, wrap around to the beginning + * here ... + */ + if (unlikely((void *)sgl == (void *)tq->stat)) { + sgl = (void *)tq->desc; + end = (void *)((void *)tq->desc + + ((void *)end - (void *)tq->stat)); + } + + write_sgl(skb, tq, sgl, end, 0, addr); + skb_orphan(skb); + + last_desc = tq->pidx + ndesc - 1; + if (last_desc >= tq->size) + last_desc -= tq->size; + tq->sdesc[last_desc].skb = skb; + tq->sdesc[last_desc].sgl = sgl; + } + + /* + * Advance our internal TX Queue state, tell the hardware about + * the new TX descriptors and return success. + */ + txq_advance(&txq->q, ndesc); + dev->trans_start = jiffies; + ring_tx_db(adapter, &txq->q, ndesc); + return NETDEV_TX_OK; + +out_free: + /* + * An error of some sort happened. Free the TX skb and tell the + * OS that we've "dealt" with the packet ... + */ + dev_kfree_skb(skb); + return NETDEV_TX_OK; +} + +/** + * t4vf_pktgl_free - free a packet gather list + * @gl: the gather list + * + * Releases the pages of a packet gather list. We do not own the last + * page on the list and do not free it. + */ +void t4vf_pktgl_free(const struct pkt_gl *gl) +{ + int frag; + + frag = gl->nfrags - 1; + while (frag--) + put_page(gl->frags[frag].page); +} + +/** + * copy_frags - copy fragments from gather list into skb_shared_info + * @si: destination skb shared info structure + * @gl: source internal packet gather list + * @offset: packet start offset in first page + * + * Copy an internal packet gather list into a Linux skb_shared_info + * structure. + */ +static inline void copy_frags(struct skb_shared_info *si, + const struct pkt_gl *gl, + unsigned int offset) +{ + unsigned int n; + + /* usually there's just one frag */ + si->frags[0].page = gl->frags[0].page; + si->frags[0].page_offset = gl->frags[0].page_offset + offset; + si->frags[0].size = gl->frags[0].size - offset; + si->nr_frags = gl->nfrags; + + n = gl->nfrags - 1; + if (n) + memcpy(&si->frags[1], &gl->frags[1], n * sizeof(skb_frag_t)); + + /* get a reference to the last page, we don't own it */ + get_page(gl->frags[n].page); +} + +/** + * do_gro - perform Generic Receive Offload ingress packet processing + * @rxq: ingress RX Ethernet Queue + * @gl: gather list for ingress packet + * @pkt: CPL header for last packet fragment + * + * Perform Generic Receive Offload (GRO) ingress packet processing. + * We use the standard Linux GRO interfaces for this. + */ +static void do_gro(struct sge_eth_rxq *rxq, const struct pkt_gl *gl, + const struct cpl_rx_pkt *pkt) +{ + int ret; + struct sk_buff *skb; + + skb = napi_get_frags(&rxq->rspq.napi); + if (unlikely(!skb)) { + t4vf_pktgl_free(gl); + rxq->stats.rx_drops++; + return; + } + + copy_frags(skb_shinfo(skb), gl, PKTSHIFT); + skb->len = gl->tot_len - PKTSHIFT; + skb->data_len = skb->len; + skb->truesize += skb->data_len; + skb->ip_summed = CHECKSUM_UNNECESSARY; + skb_record_rx_queue(skb, rxq->rspq.idx); + + if (unlikely(pkt->vlan_ex)) { + struct port_info *pi = netdev_priv(rxq->rspq.netdev); + struct vlan_group *grp = pi->vlan_grp; + + rxq->stats.vlan_ex++; + if (likely(grp)) { + ret = vlan_gro_frags(&rxq->rspq.napi, grp, + be16_to_cpu(pkt->vlan)); + goto stats; + } + } + ret = napi_gro_frags(&rxq->rspq.napi); + +stats: + if (ret == GRO_HELD) + rxq->stats.lro_pkts++; + else if (ret == GRO_MERGED || ret == GRO_MERGED_FREE) + rxq->stats.lro_merged++; + rxq->stats.pkts++; + rxq->stats.rx_cso++; +} + +/** + * t4vf_ethrx_handler - process an ingress ethernet packet + * @rspq: the response queue that received the packet + * @rsp: the response queue descriptor holding the RX_PKT message + * @gl: the gather list of packet fragments + * + * Process an ingress ethernet packet and deliver it to the stack. + */ +int t4vf_ethrx_handler(struct sge_rspq *rspq, const __be64 *rsp, + const struct pkt_gl *gl) +{ + struct sk_buff *skb; + struct port_info *pi; + struct skb_shared_info *ssi; + const struct cpl_rx_pkt *pkt = (void *)&rsp[1]; + bool csum_ok = pkt->csum_calc && !pkt->err_vec; + unsigned int len = be16_to_cpu(pkt->len); + struct sge_eth_rxq *rxq = container_of(rspq, struct sge_eth_rxq, rspq); + + /* + * If this is a good TCP packet and we have Generic Receive Offload + * enabled, handle the packet in the GRO path. + */ + if ((pkt->l2info & cpu_to_be32(RXF_TCP)) && + (rspq->netdev->features & NETIF_F_GRO) && csum_ok && + !pkt->ip_frag) { + do_gro(rxq, gl, pkt); + return 0; + } + + /* + * If the ingress packet is small enough, allocate an skb large enough + * for all of the data and copy it inline. Otherwise, allocate an skb + * with enough room to pull in the header and reference the rest of + * the data via the skb fragment list. + */ + if (len <= RX_COPY_THRES) { + /* small packets have only one fragment */ + skb = alloc_skb(gl->frags[0].size, GFP_ATOMIC); + if (!skb) + goto nomem; + __skb_put(skb, gl->frags[0].size); + skb_copy_to_linear_data(skb, gl->va, gl->frags[0].size); + } else { + skb = alloc_skb(RX_PKT_PULL_LEN, GFP_ATOMIC); + if (!skb) + goto nomem; + __skb_put(skb, RX_PKT_PULL_LEN); + skb_copy_to_linear_data(skb, gl->va, RX_PKT_PULL_LEN); + + ssi = skb_shinfo(skb); + ssi->frags[0].page = gl->frags[0].page; + ssi->frags[0].page_offset = (gl->frags[0].page_offset + + RX_PKT_PULL_LEN); + ssi->frags[0].size = gl->frags[0].size - RX_PKT_PULL_LEN; + if (gl->nfrags > 1) + memcpy(&ssi->frags[1], &gl->frags[1], + (gl->nfrags-1) * sizeof(skb_frag_t)); + ssi->nr_frags = gl->nfrags; + skb->len = len + PKTSHIFT; + skb->data_len = skb->len - RX_PKT_PULL_LEN; + skb->truesize += skb->data_len; + + /* Get a reference for the last page, we don't own it */ + get_page(gl->frags[gl->nfrags - 1].page); + } + + __skb_pull(skb, PKTSHIFT); + skb->protocol = eth_type_trans(skb, rspq->netdev); + skb_record_rx_queue(skb, rspq->idx); + skb->dev->last_rx = jiffies; /* XXX removed 2.6.29 */ + pi = netdev_priv(skb->dev); + rxq->stats.pkts++; + + if (csum_ok && (pi->rx_offload & RX_CSO) && !pkt->err_vec && + (be32_to_cpu(pkt->l2info) & (RXF_UDP|RXF_TCP))) { + if (!pkt->ip_frag) + skb->ip_summed = CHECKSUM_UNNECESSARY; + else { + __sum16 c = (__force __sum16)pkt->csum; + skb->csum = csum_unfold(c); + skb->ip_summed = CHECKSUM_COMPLETE; + } + rxq->stats.rx_cso++; + } else + skb->ip_summed = CHECKSUM_NONE; + + if (unlikely(pkt->vlan_ex)) { + struct vlan_group *grp = pi->vlan_grp; + + rxq->stats.vlan_ex++; + if (likely(grp)) + vlan_hwaccel_receive_skb(skb, grp, + be16_to_cpu(pkt->vlan)); + else + dev_kfree_skb_any(skb); + } else + netif_receive_skb(skb); + + return 0; + +nomem: + t4vf_pktgl_free(gl); + rxq->stats.rx_drops++; + return 0; +} + +/** + * is_new_response - check if a response is newly written + * @rc: the response control descriptor + * @rspq: the response queue + * + * Returns true if a response descriptor contains a yet unprocessed + * response. + */ +static inline bool is_new_response(const struct rsp_ctrl *rc, + const struct sge_rspq *rspq) +{ + return RSPD_GEN(rc->type_gen) == rspq->gen; +} + +/** + * restore_rx_bufs - put back a packet's RX buffers + * @gl: the packet gather list + * @fl: the SGE Free List + * @nfrags: how many fragments in @si + * + * Called when we find out that the current packet, @si, can't be + * processed right away for some reason. This is a very rare event and + * there's no effort to make this suspension/resumption process + * particularly efficient. + * + * We implement the suspension by putting all of the RX buffers associated + * with the current packet back on the original Free List. The buffers + * have already been unmapped and are left unmapped, we mark them as + * unmapped in order to prevent further unmapping attempts. (Effectively + * this function undoes the series of @unmap_rx_buf calls which were done + * to create the current packet's gather list.) This leaves us ready to + * restart processing of the packet the next time we start processing the + * RX Queue ... + */ +static void restore_rx_bufs(const struct pkt_gl *gl, struct sge_fl *fl, + int frags) +{ + struct rx_sw_desc *sdesc; + + while (frags--) { + if (fl->cidx == 0) + fl->cidx = fl->size - 1; + else + fl->cidx--; + sdesc = &fl->sdesc[fl->cidx]; + sdesc->page = gl->frags[frags].page; + sdesc->dma_addr |= RX_UNMAPPED_BUF; + fl->avail++; + } +} + +/** + * rspq_next - advance to the next entry in a response queue + * @rspq: the queue + * + * Updates the state of a response queue to advance it to the next entry. + */ +static inline void rspq_next(struct sge_rspq *rspq) +{ + rspq->cur_desc = (void *)rspq->cur_desc + rspq->iqe_len; + if (unlikely(++rspq->cidx == rspq->size)) { + rspq->cidx = 0; + rspq->gen ^= 1; + rspq->cur_desc = rspq->desc; + } +} + +/** + * process_responses - process responses from an SGE response queue + * @rspq: the ingress response queue to process + * @budget: how many responses can be processed in this round + * + * Process responses from a Scatter Gather Engine response queue up to + * the supplied budget. Responses include received packets as well as + * control messages from firmware or hardware. + * + * Additionally choose the interrupt holdoff time for the next interrupt + * on this queue. If the system is under memory shortage use a fairly + * long delay to help recovery. + */ +int process_responses(struct sge_rspq *rspq, int budget) +{ + struct sge_eth_rxq *rxq = container_of(rspq, struct sge_eth_rxq, rspq); + int budget_left = budget; + + while (likely(budget_left)) { + int ret, rsp_type; + const struct rsp_ctrl *rc; + + rc = (void *)rspq->cur_desc + (rspq->iqe_len - sizeof(*rc)); + if (!is_new_response(rc, rspq)) + break; + + /* + * Figure out what kind of response we've received from the + * SGE. + */ + rmb(); + rsp_type = RSPD_TYPE(rc->type_gen); + if (likely(rsp_type == RSP_TYPE_FLBUF)) { + skb_frag_t *fp; + struct pkt_gl gl; + const struct rx_sw_desc *sdesc; + u32 bufsz, frag; + u32 len = be32_to_cpu(rc->pldbuflen_qid); + + /* + * If we get a "new buffer" message from the SGE we + * need to move on to the next Free List buffer. + */ + if (len & RSPD_NEWBUF) { + /* + * We get one "new buffer" message when we + * first start up a queue so we need to ignore + * it when our offset into the buffer is 0. + */ + if (likely(rspq->offset > 0)) { + free_rx_bufs(rspq->adapter, &rxq->fl, + 1); + rspq->offset = 0; + } + len = RSPD_LEN(len); + } + + /* + * Gather packet fragments. + */ + for (frag = 0, fp = gl.frags; /**/; frag++, fp++) { + BUG_ON(frag >= MAX_SKB_FRAGS); + BUG_ON(rxq->fl.avail == 0); + sdesc = &rxq->fl.sdesc[rxq->fl.cidx]; + bufsz = get_buf_size(sdesc); + fp->page = sdesc->page; + fp->page_offset = rspq->offset; + fp->size = min(bufsz, len); + len -= fp->size; + if (!len) + break; + unmap_rx_buf(rspq->adapter, &rxq->fl); + } + gl.nfrags = frag+1; + + /* + * Last buffer remains mapped so explicitly make it + * coherent for CPU access and start preloading first + * cache line ... + */ + dma_sync_single_for_cpu(rspq->adapter->pdev_dev, + get_buf_addr(sdesc), + fp->size, DMA_FROM_DEVICE); + gl.va = (page_address(gl.frags[0].page) + + gl.frags[0].page_offset); + prefetch(gl.va); + + /* + * Hand the new ingress packet to the handler for + * this Response Queue. + */ + ret = rspq->handler(rspq, rspq->cur_desc, &gl); + if (likely(ret == 0)) + rspq->offset += ALIGN(fp->size, FL_ALIGN); + else + restore_rx_bufs(&gl, &rxq->fl, frag); + } else if (likely(rsp_type == RSP_TYPE_CPL)) { + ret = rspq->handler(rspq, rspq->cur_desc, NULL); + } else { + WARN_ON(rsp_type > RSP_TYPE_CPL); + ret = 0; + } + + if (unlikely(ret)) { + /* + * Couldn't process descriptor, back off for recovery. + * We use the SGE's last timer which has the longest + * interrupt coalescing value ... + */ + const int NOMEM_TIMER_IDX = SGE_NTIMERS-1; + rspq->next_intr_params = + QINTR_TIMER_IDX(NOMEM_TIMER_IDX); + break; + } + + rspq_next(rspq); + budget_left--; + } + + /* + * If this is a Response Queue with an associated Free List and + * at least two Egress Queue units available in the Free List + * for new buffer pointers, refill the Free List. + */ + if (rspq->offset >= 0 && + rxq->fl.size - rxq->fl.avail >= 2*FL_PER_EQ_UNIT) + __refill_fl(rspq->adapter, &rxq->fl); + return budget - budget_left; +} + +/** + * napi_rx_handler - the NAPI handler for RX processing + * @napi: the napi instance + * @budget: how many packets we can process in this round + * + * Handler for new data events when using NAPI. This does not need any + * locking or protection from interrupts as data interrupts are off at + * this point and other adapter interrupts do not interfere (the latter + * in not a concern at all with MSI-X as non-data interrupts then have + * a separate handler). + */ +static int napi_rx_handler(struct napi_struct *napi, int budget) +{ + unsigned int intr_params; + struct sge_rspq *rspq = container_of(napi, struct sge_rspq, napi); + int work_done = process_responses(rspq, budget); + + if (likely(work_done < budget)) { + napi_complete(napi); + intr_params = rspq->next_intr_params; + rspq->next_intr_params = rspq->intr_params; + } else + intr_params = QINTR_TIMER_IDX(SGE_TIMER_UPD_CIDX); + + if (unlikely(work_done == 0)) + rspq->unhandled_irqs++; + + t4_write_reg(rspq->adapter, + T4VF_SGE_BASE_ADDR + SGE_VF_GTS, + CIDXINC(work_done) | + INGRESSQID((u32)rspq->cntxt_id) | + SEINTARM(intr_params)); + return work_done; +} + +/* + * The MSI-X interrupt handler for an SGE response queue for the NAPI case + * (i.e., response queue serviced by NAPI polling). + */ +irqreturn_t t4vf_sge_intr_msix(int irq, void *cookie) +{ + struct sge_rspq *rspq = cookie; + + napi_schedule(&rspq->napi); + return IRQ_HANDLED; +} + +/* + * Process the indirect interrupt entries in the interrupt queue and kick off + * NAPI for each queue that has generated an entry. + */ +static unsigned int process_intrq(struct adapter *adapter) +{ + struct sge *s = &adapter->sge; + struct sge_rspq *intrq = &s->intrq; + unsigned int work_done; + + spin_lock(&adapter->sge.intrq_lock); + for (work_done = 0; ; work_done++) { + const struct rsp_ctrl *rc; + unsigned int qid, iq_idx; + struct sge_rspq *rspq; + + /* + * Grab the next response from the interrupt queue and bail + * out if it's not a new response. + */ + rc = (void *)intrq->cur_desc + (intrq->iqe_len - sizeof(*rc)); + if (!is_new_response(rc, intrq)) + break; + + /* + * If the response isn't a forwarded interrupt message issue a + * error and go on to the next response message. This should + * never happen ... + */ + rmb(); + if (unlikely(RSPD_TYPE(rc->type_gen) != RSP_TYPE_INTR)) { + dev_err(adapter->pdev_dev, + "Unexpected INTRQ response type %d\n", + RSPD_TYPE(rc->type_gen)); + continue; + } + + /* + * Extract the Queue ID from the interrupt message and perform + * sanity checking to make sure it really refers to one of our + * Ingress Queues which is active and matches the queue's ID. + * None of these error conditions should ever happen so we may + * want to either make them fatal and/or conditionalized under + * DEBUG. + */ + qid = RSPD_QID(be32_to_cpu(rc->pldbuflen_qid)); + iq_idx = IQ_IDX(s, qid); + if (unlikely(iq_idx >= MAX_INGQ)) { + dev_err(adapter->pdev_dev, + "Ingress QID %d out of range\n", qid); + continue; + } + rspq = s->ingr_map[iq_idx]; + if (unlikely(rspq == NULL)) { + dev_err(adapter->pdev_dev, + "Ingress QID %d RSPQ=NULL\n", qid); + continue; + } + if (unlikely(rspq->abs_id != qid)) { + dev_err(adapter->pdev_dev, + "Ingress QID %d refers to RSPQ %d\n", + qid, rspq->abs_id); + continue; + } + + /* + * Schedule NAPI processing on the indicated Response Queue + * and move on to the next entry in the Forwarded Interrupt + * Queue. + */ + napi_schedule(&rspq->napi); + rspq_next(intrq); + } + + t4_write_reg(adapter, T4VF_SGE_BASE_ADDR + SGE_VF_GTS, + CIDXINC(work_done) | + INGRESSQID(intrq->cntxt_id) | + SEINTARM(intrq->intr_params)); + + spin_unlock(&adapter->sge.intrq_lock); + + return work_done; +} + +/* + * The MSI interrupt handler handles data events from SGE response queues as + * well as error and other async events as they all use the same MSI vector. + */ +irqreturn_t t4vf_intr_msi(int irq, void *cookie) +{ + struct adapter *adapter = cookie; + + process_intrq(adapter); + return IRQ_HANDLED; +} + +/** + * t4vf_intr_handler - select the top-level interrupt handler + * @adapter: the adapter + * + * Selects the top-level interrupt handler based on the type of interrupts + * (MSI-X or MSI). + */ +irq_handler_t t4vf_intr_handler(struct adapter *adapter) +{ + BUG_ON((adapter->flags & (USING_MSIX|USING_MSI)) == 0); + if (adapter->flags & USING_MSIX) + return t4vf_sge_intr_msix; + else + return t4vf_intr_msi; +} + +/** + * sge_rx_timer_cb - perform periodic maintenance of SGE RX queues + * @data: the adapter + * + * Runs periodically from a timer to perform maintenance of SGE RX queues. + * + * a) Replenishes RX queues that have run out due to memory shortage. + * Normally new RX buffers are added when existing ones are consumed but + * when out of memory a queue can become empty. We schedule NAPI to do + * the actual refill. + */ +static void sge_rx_timer_cb(unsigned long data) +{ + struct adapter *adapter = (struct adapter *)data; + struct sge *s = &adapter->sge; + unsigned int i; + + /* + * Scan the "Starving Free Lists" flag array looking for any Free + * Lists in need of more free buffers. If we find one and it's not + * being actively polled, then bump its "starving" counter and attempt + * to refill it. If we're successful in adding enough buffers to push + * the Free List over the starving threshold, then we can clear its + * "starving" status. + */ + for (i = 0; i < ARRAY_SIZE(s->starving_fl); i++) { + unsigned long m; + + for (m = s->starving_fl[i]; m; m &= m - 1) { + unsigned int id = __ffs(m) + i * BITS_PER_LONG; + struct sge_fl *fl = s->egr_map[id]; + + clear_bit(id, s->starving_fl); + smp_mb__after_clear_bit(); + + /* + * Since we are accessing fl without a lock there's a + * small probability of a false positive where we + * schedule napi but the FL is no longer starving. + * No biggie. + */ + if (fl_starving(fl)) { + struct sge_eth_rxq *rxq; + + rxq = container_of(fl, struct sge_eth_rxq, fl); + if (napi_reschedule(&rxq->rspq.napi)) + fl->starving++; + else + set_bit(id, s->starving_fl); + } + } + } + + /* + * Reschedule the next scan for starving Free Lists ... + */ + mod_timer(&s->rx_timer, jiffies + RX_QCHECK_PERIOD); +} + +/** + * sge_tx_timer_cb - perform periodic maintenance of SGE Tx queues + * @data: the adapter + * + * Runs periodically from a timer to perform maintenance of SGE TX queues. + * + * b) Reclaims completed Tx packets for the Ethernet queues. Normally + * packets are cleaned up by new Tx packets, this timer cleans up packets + * when no new packets are being submitted. This is essential for pktgen, + * at least. + */ +static void sge_tx_timer_cb(unsigned long data) +{ + struct adapter *adapter = (struct adapter *)data; + struct sge *s = &adapter->sge; + unsigned int i, budget; + + budget = MAX_TIMER_TX_RECLAIM; + i = s->ethtxq_rover; + do { + struct sge_eth_txq *txq = &s->ethtxq[i]; + + if (reclaimable(&txq->q) && __netif_tx_trylock(txq->txq)) { + int avail = reclaimable(&txq->q); + + if (avail > budget) + avail = budget; + + free_tx_desc(adapter, &txq->q, avail, true); + txq->q.in_use -= avail; + __netif_tx_unlock(txq->txq); + + budget -= avail; + if (!budget) + break; + } + + i++; + if (i >= s->ethqsets) + i = 0; + } while (i != s->ethtxq_rover); + s->ethtxq_rover = i; + + /* + * If we found too many reclaimable packets schedule a timer in the + * near future to continue where we left off. Otherwise the next timer + * will be at its normal interval. + */ + mod_timer(&s->tx_timer, jiffies + (budget ? TX_QCHECK_PERIOD : 2)); +} + +/** + * t4vf_sge_alloc_rxq - allocate an SGE RX Queue + * @adapter: the adapter + * @rspq: pointer to to the new rxq's Response Queue to be filled in + * @iqasynch: if 0, a normal rspq; if 1, an asynchronous event queue + * @dev: the network device associated with the new rspq + * @intr_dest: MSI-X vector index (overriden in MSI mode) + * @fl: pointer to the new rxq's Free List to be filled in + * @hnd: the interrupt handler to invoke for the rspq + */ +int t4vf_sge_alloc_rxq(struct adapter *adapter, struct sge_rspq *rspq, + bool iqasynch, struct net_device *dev, + int intr_dest, + struct sge_fl *fl, rspq_handler_t hnd) +{ + struct port_info *pi = netdev_priv(dev); + struct fw_iq_cmd cmd, rpl; + int ret, iqandst, flsz = 0; + + /* + * If we're using MSI interrupts and we're not initializing the + * Forwarded Interrupt Queue itself, then set up this queue for + * indirect interrupts to the Forwarded Interrupt Queue. Obviously + * the Forwarded Interrupt Queue must be set up before any other + * ingress queue ... + */ + if ((adapter->flags & USING_MSI) && rspq != &adapter->sge.intrq) { + iqandst = SGE_INTRDST_IQ; + intr_dest = adapter->sge.intrq.abs_id; + } else + iqandst = SGE_INTRDST_PCI; + + /* + * Allocate the hardware ring for the Response Queue. The size needs + * to be a multiple of 16 which includes the mandatory status entry + * (regardless of whether the Status Page capabilities are enabled or + * not). + */ + rspq->size = roundup(rspq->size, 16); + rspq->desc = alloc_ring(adapter->pdev_dev, rspq->size, rspq->iqe_len, + 0, &rspq->phys_addr, NULL, 0); + if (!rspq->desc) + return -ENOMEM; + + /* + * Fill in the Ingress Queue Command. Note: Ideally this code would + * be in t4vf_hw.c but there are so many parameters and dependencies + * on our Linux SGE state that we would end up having to pass tons of + * parameters. We'll have to think about how this might be migrated + * into OS-independent common code ... + */ + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP(FW_IQ_CMD) | + FW_CMD_REQUEST | + FW_CMD_WRITE | + FW_CMD_EXEC); + cmd.alloc_to_len16 = cpu_to_be32(FW_IQ_CMD_ALLOC | + FW_IQ_CMD_IQSTART(1) | + FW_LEN16(cmd)); + cmd.type_to_iqandstindex = + cpu_to_be32(FW_IQ_CMD_TYPE(FW_IQ_TYPE_FL_INT_CAP) | + FW_IQ_CMD_IQASYNCH(iqasynch) | + FW_IQ_CMD_VIID(pi->viid) | + FW_IQ_CMD_IQANDST(iqandst) | + FW_IQ_CMD_IQANUS(1) | + FW_IQ_CMD_IQANUD(SGE_UPDATEDEL_INTR) | + FW_IQ_CMD_IQANDSTINDEX(intr_dest)); + cmd.iqdroprss_to_iqesize = + cpu_to_be16(FW_IQ_CMD_IQPCIECH(pi->port_id) | + FW_IQ_CMD_IQGTSMODE | + FW_IQ_CMD_IQINTCNTTHRESH(rspq->pktcnt_idx) | + FW_IQ_CMD_IQESIZE(ilog2(rspq->iqe_len) - 4)); + cmd.iqsize = cpu_to_be16(rspq->size); + cmd.iqaddr = cpu_to_be64(rspq->phys_addr); + + if (fl) { + /* + * Allocate the ring for the hardware free list (with space + * for its status page) along with the associated software + * descriptor ring. The free list size needs to be a multiple + * of the Egress Queue Unit. + */ + fl->size = roundup(fl->size, FL_PER_EQ_UNIT); + fl->desc = alloc_ring(adapter->pdev_dev, fl->size, + sizeof(__be64), sizeof(struct rx_sw_desc), + &fl->addr, &fl->sdesc, STAT_LEN); + if (!fl->desc) { + ret = -ENOMEM; + goto err; + } + + /* + * Calculate the size of the hardware free list ring plus + * status page (which the SGE will place at the end of the + * free list ring) in Egress Queue Units. + */ + flsz = (fl->size / FL_PER_EQ_UNIT + + STAT_LEN / EQ_UNIT); + + /* + * Fill in all the relevant firmware Ingress Queue Command + * fields for the free list. + */ + cmd.iqns_to_fl0congen = + cpu_to_be32( + FW_IQ_CMD_FL0HOSTFCMODE(SGE_HOSTFCMODE_NONE) | + FW_IQ_CMD_FL0PACKEN | + FW_IQ_CMD_FL0PADEN); + cmd.fl0dcaen_to_fl0cidxfthresh = + cpu_to_be16( + FW_IQ_CMD_FL0FBMIN(SGE_FETCHBURSTMIN_64B) | + FW_IQ_CMD_FL0FBMAX(SGE_FETCHBURSTMAX_512B)); + cmd.fl0size = cpu_to_be16(flsz); + cmd.fl0addr = cpu_to_be64(fl->addr); + } + + /* + * Issue the firmware Ingress Queue Command and extract the results if + * it completes successfully. + */ + ret = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl); + if (ret) + goto err; + + netif_napi_add(dev, &rspq->napi, napi_rx_handler, 64); + rspq->cur_desc = rspq->desc; + rspq->cidx = 0; + rspq->gen = 1; + rspq->next_intr_params = rspq->intr_params; + rspq->cntxt_id = be16_to_cpu(rpl.iqid); + rspq->abs_id = be16_to_cpu(rpl.physiqid); + rspq->size--; /* subtract status entry */ + rspq->adapter = adapter; + rspq->netdev = dev; + rspq->handler = hnd; + + /* set offset to -1 to distinguish ingress queues without FL */ + rspq->offset = fl ? 0 : -1; + + if (fl) { + fl->cntxt_id = be16_to_cpu(rpl.fl0id); + fl->avail = 0; + fl->pend_cred = 0; + fl->pidx = 0; + fl->cidx = 0; + fl->alloc_failed = 0; + fl->large_alloc_failed = 0; + fl->starving = 0; + refill_fl(adapter, fl, fl_cap(fl), GFP_KERNEL); + } + + return 0; + +err: + /* + * An error occurred. Clean up our partial allocation state and + * return the error. + */ + if (rspq->desc) { + dma_free_coherent(adapter->pdev_dev, rspq->size * rspq->iqe_len, + rspq->desc, rspq->phys_addr); + rspq->desc = NULL; + } + if (fl && fl->desc) { + kfree(fl->sdesc); + fl->sdesc = NULL; + dma_free_coherent(adapter->pdev_dev, flsz * EQ_UNIT, + fl->desc, fl->addr); + fl->desc = NULL; + } + return ret; +} + +/** + * t4vf_sge_alloc_eth_txq - allocate an SGE Ethernet TX Queue + * @adapter: the adapter + * @txq: pointer to the new txq to be filled in + * @devq: the network TX queue associated with the new txq + * @iqid: the relative ingress queue ID to which events relating to + * the new txq should be directed + */ +int t4vf_sge_alloc_eth_txq(struct adapter *adapter, struct sge_eth_txq *txq, + struct net_device *dev, struct netdev_queue *devq, + unsigned int iqid) +{ + int ret, nentries; + struct fw_eq_eth_cmd cmd, rpl; + struct port_info *pi = netdev_priv(dev); + + /* + * Calculate the size of the hardware TX Queue (including the + * status age on the end) in units of TX Descriptors. + */ + nentries = txq->q.size + STAT_LEN / sizeof(struct tx_desc); + + /* + * Allocate the hardware ring for the TX ring (with space for its + * status page) along with the associated software descriptor ring. + */ + txq->q.desc = alloc_ring(adapter->pdev_dev, txq->q.size, + sizeof(struct tx_desc), + sizeof(struct tx_sw_desc), + &txq->q.phys_addr, &txq->q.sdesc, STAT_LEN); + if (!txq->q.desc) + return -ENOMEM; + + /* + * Fill in the Egress Queue Command. Note: As with the direct use of + * the firmware Ingress Queue COmmand above in our RXQ allocation + * routine, ideally, this code would be in t4vf_hw.c. Again, we'll + * have to see if there's some reasonable way to parameterize it + * into the common code ... + */ + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP(FW_EQ_ETH_CMD) | + FW_CMD_REQUEST | + FW_CMD_WRITE | + FW_CMD_EXEC); + cmd.alloc_to_len16 = cpu_to_be32(FW_EQ_ETH_CMD_ALLOC | + FW_EQ_ETH_CMD_EQSTART | + FW_LEN16(cmd)); + cmd.viid_pkd = cpu_to_be32(FW_EQ_ETH_CMD_VIID(pi->viid)); + cmd.fetchszm_to_iqid = + cpu_to_be32(FW_EQ_ETH_CMD_HOSTFCMODE(SGE_HOSTFCMODE_STPG) | + FW_EQ_ETH_CMD_PCIECHN(pi->port_id) | + FW_EQ_ETH_CMD_IQID(iqid)); + cmd.dcaen_to_eqsize = + cpu_to_be32(FW_EQ_ETH_CMD_FBMIN(SGE_FETCHBURSTMIN_64B) | + FW_EQ_ETH_CMD_FBMAX(SGE_FETCHBURSTMAX_512B) | + FW_EQ_ETH_CMD_CIDXFTHRESH(SGE_CIDXFLUSHTHRESH_32) | + FW_EQ_ETH_CMD_EQSIZE(nentries)); + cmd.eqaddr = cpu_to_be64(txq->q.phys_addr); + + /* + * Issue the firmware Egress Queue Command and extract the results if + * it completes successfully. + */ + ret = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl); + if (ret) { + /* + * The girmware Ingress Queue Command failed for some reason. + * Free up our partial allocation state and return the error. + */ + kfree(txq->q.sdesc); + txq->q.sdesc = NULL; + dma_free_coherent(adapter->pdev_dev, + nentries * sizeof(struct tx_desc), + txq->q.desc, txq->q.phys_addr); + txq->q.desc = NULL; + return ret; + } + + txq->q.in_use = 0; + txq->q.cidx = 0; + txq->q.pidx = 0; + txq->q.stat = (void *)&txq->q.desc[txq->q.size]; + txq->q.cntxt_id = FW_EQ_ETH_CMD_EQID_GET(be32_to_cpu(rpl.eqid_pkd)); + txq->q.abs_id = + FW_EQ_ETH_CMD_PHYSEQID_GET(be32_to_cpu(rpl.physeqid_pkd)); + txq->txq = devq; + txq->tso = 0; + txq->tx_cso = 0; + txq->vlan_ins = 0; + txq->q.stops = 0; + txq->q.restarts = 0; + txq->mapping_err = 0; + return 0; +} + +/* + * Free the DMA map resources associated with a TX queue. + */ +static void free_txq(struct adapter *adapter, struct sge_txq *tq) +{ + dma_free_coherent(adapter->pdev_dev, + tq->size * sizeof(*tq->desc) + STAT_LEN, + tq->desc, tq->phys_addr); + tq->cntxt_id = 0; + tq->sdesc = NULL; + tq->desc = NULL; +} + +/* + * Free the resources associated with a response queue (possibly including a + * free list). + */ +static void free_rspq_fl(struct adapter *adapter, struct sge_rspq *rspq, + struct sge_fl *fl) +{ + unsigned int flid = fl ? fl->cntxt_id : 0xffff; + + t4vf_iq_free(adapter, FW_IQ_TYPE_FL_INT_CAP, + rspq->cntxt_id, flid, 0xffff); + dma_free_coherent(adapter->pdev_dev, (rspq->size + 1) * rspq->iqe_len, + rspq->desc, rspq->phys_addr); + netif_napi_del(&rspq->napi); + rspq->netdev = NULL; + rspq->cntxt_id = 0; + rspq->abs_id = 0; + rspq->desc = NULL; + + if (fl) { + free_rx_bufs(adapter, fl, fl->avail); + dma_free_coherent(adapter->pdev_dev, + fl->size * sizeof(*fl->desc) + STAT_LEN, + fl->desc, fl->addr); + kfree(fl->sdesc); + fl->sdesc = NULL; + fl->cntxt_id = 0; + fl->desc = NULL; + } +} + +/** + * t4vf_free_sge_resources - free SGE resources + * @adapter: the adapter + * + * Frees resources used by the SGE queue sets. + */ +void t4vf_free_sge_resources(struct adapter *adapter) +{ + struct sge *s = &adapter->sge; + struct sge_eth_rxq *rxq = s->ethrxq; + struct sge_eth_txq *txq = s->ethtxq; + struct sge_rspq *evtq = &s->fw_evtq; + struct sge_rspq *intrq = &s->intrq; + int qs; + + for (qs = 0; qs < adapter->sge.ethqsets; qs++, rxq++, txq++) { + if (rxq->rspq.desc) + free_rspq_fl(adapter, &rxq->rspq, &rxq->fl); + if (txq->q.desc) { + t4vf_eth_eq_free(adapter, txq->q.cntxt_id); + free_tx_desc(adapter, &txq->q, txq->q.in_use, true); + kfree(txq->q.sdesc); + free_txq(adapter, &txq->q); + } + } + if (evtq->desc) + free_rspq_fl(adapter, evtq, NULL); + if (intrq->desc) + free_rspq_fl(adapter, intrq, NULL); +} + +/** + * t4vf_sge_start - enable SGE operation + * @adapter: the adapter + * + * Start tasklets and timers associated with the DMA engine. + */ +void t4vf_sge_start(struct adapter *adapter) +{ + adapter->sge.ethtxq_rover = 0; + mod_timer(&adapter->sge.rx_timer, jiffies + RX_QCHECK_PERIOD); + mod_timer(&adapter->sge.tx_timer, jiffies + TX_QCHECK_PERIOD); +} + +/** + * t4vf_sge_stop - disable SGE operation + * @adapter: the adapter + * + * Stop tasklets and timers associated with the DMA engine. Note that + * this is effective only if measures have been taken to disable any HW + * events that may restart them. + */ +void t4vf_sge_stop(struct adapter *adapter) +{ + struct sge *s = &adapter->sge; + + if (s->rx_timer.function) + del_timer_sync(&s->rx_timer); + if (s->tx_timer.function) + del_timer_sync(&s->tx_timer); +} + +/** + * t4vf_sge_init - initialize SGE + * @adapter: the adapter + * + * Performs SGE initialization needed every time after a chip reset. + * We do not initialize any of the queue sets here, instead the driver + * top-level must request those individually. We also do not enable DMA + * here, that should be done after the queues have been set up. + */ +int t4vf_sge_init(struct adapter *adapter) +{ + struct sge_params *sge_params = &adapter->params.sge; + u32 fl0 = sge_params->sge_fl_buffer_size[0]; + u32 fl1 = sge_params->sge_fl_buffer_size[1]; + struct sge *s = &adapter->sge; + + /* + * Start by vetting the basic SGE parameters which have been set up by + * the Physical Function Driver. Ideally we should be able to deal + * with _any_ configuration. Practice is different ... + */ + if (fl0 != PAGE_SIZE || (fl1 != 0 && fl1 <= fl0)) { + dev_err(adapter->pdev_dev, "bad SGE FL buffer sizes [%d, %d]\n", + fl0, fl1); + return -EINVAL; + } + if ((sge_params->sge_control & RXPKTCPLMODE) == 0) { + dev_err(adapter->pdev_dev, "bad SGE CPL MODE\n"); + return -EINVAL; + } + + /* + * Now translate the adapter parameters into our internal forms. + */ + if (fl1) + FL_PG_ORDER = ilog2(fl1) - PAGE_SHIFT; + STAT_LEN = ((sge_params->sge_control & EGRSTATUSPAGESIZE) ? 128 : 64); + PKTSHIFT = PKTSHIFT_GET(sge_params->sge_control); + FL_ALIGN = 1 << (INGPADBOUNDARY_GET(sge_params->sge_control) + + SGE_INGPADBOUNDARY_SHIFT); + + /* + * Set up tasklet timers. + */ + setup_timer(&s->rx_timer, sge_rx_timer_cb, (unsigned long)adapter); + setup_timer(&s->tx_timer, sge_tx_timer_cb, (unsigned long)adapter); + + /* + * Initialize Forwarded Interrupt Queue lock. + */ + spin_lock_init(&s->intrq_lock); + + return 0; +} diff --git a/drivers/net/cxgb4vf/t4vf_common.h b/drivers/net/cxgb4vf/t4vf_common.h new file mode 100644 index 00000000000..5c7bde7f9ba --- /dev/null +++ b/drivers/net/cxgb4vf/t4vf_common.h @@ -0,0 +1,273 @@ +/* + * This file is part of the Chelsio T4 PCI-E SR-IOV Virtual Function Ethernet + * driver for Linux. + * + * Copyright (c) 2009-2010 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#ifndef __T4VF_COMMON_H__ +#define __T4VF_COMMON_H__ + +#include "../cxgb4/t4fw_api.h" + +/* + * The "len16" field of a Firmware Command Structure ... + */ +#define FW_LEN16(fw_struct) FW_CMD_LEN16(sizeof(fw_struct) / 16) + +/* + * Per-VF statistics. + */ +struct t4vf_port_stats { + /* + * TX statistics. + */ + u64 tx_bcast_bytes; /* broadcast */ + u64 tx_bcast_frames; + u64 tx_mcast_bytes; /* multicast */ + u64 tx_mcast_frames; + u64 tx_ucast_bytes; /* unicast */ + u64 tx_ucast_frames; + u64 tx_drop_frames; /* TX dropped frames */ + u64 tx_offload_bytes; /* offload */ + u64 tx_offload_frames; + + /* + * RX statistics. + */ + u64 rx_bcast_bytes; /* broadcast */ + u64 rx_bcast_frames; + u64 rx_mcast_bytes; /* multicast */ + u64 rx_mcast_frames; + u64 rx_ucast_bytes; + u64 rx_ucast_frames; /* unicast */ + + u64 rx_err_frames; /* RX error frames */ +}; + +/* + * Per-"port" (Virtual Interface) link configuration ... + */ +struct link_config { + unsigned int supported; /* link capabilities */ + unsigned int advertising; /* advertised capabilities */ + unsigned short requested_speed; /* speed user has requested */ + unsigned short speed; /* actual link speed */ + unsigned char requested_fc; /* flow control user has requested */ + unsigned char fc; /* actual link flow control */ + unsigned char autoneg; /* autonegotiating? */ + unsigned char link_ok; /* link up? */ +}; + +enum { + PAUSE_RX = 1 << 0, + PAUSE_TX = 1 << 1, + PAUSE_AUTONEG = 1 << 2 +}; + +/* + * General device parameters ... + */ +struct dev_params { + u32 fwrev; /* firmware version */ + u32 tprev; /* TP Microcode Version */ +}; + +/* + * Scatter Gather Engine parameters. These are almost all determined by the + * Physical Function Driver. We just need to grab them to see within which + * environment we're playing ... + */ +struct sge_params { + u32 sge_control; /* padding, boundaries, lengths, etc. */ + u32 sge_host_page_size; /* RDMA page sizes */ + u32 sge_queues_per_page; /* RDMA queues/page */ + u32 sge_user_mode_limits; /* limits for BAR2 user mode accesses */ + u32 sge_fl_buffer_size[16]; /* free list buffer sizes */ + u32 sge_ingress_rx_threshold; /* RX counter interrupt threshold[4] */ + u32 sge_timer_value_0_and_1; /* interrupt coalescing timer values */ + u32 sge_timer_value_2_and_3; + u32 sge_timer_value_4_and_5; +}; + +/* + * Vital Product Data parameters. + */ +struct vpd_params { + u32 cclk; /* Core Clock (KHz) */ +}; + +/* + * Global Receive Side Scaling (RSS) parameters in host-native format. + */ +struct rss_params { + unsigned int mode; /* RSS mode */ + union { + struct { + int synmapen:1; /* SYN Map Enable */ + int syn4tupenipv6:1; /* enable hashing 4-tuple IPv6 SYNs */ + int syn2tupenipv6:1; /* enable hashing 2-tuple IPv6 SYNs */ + int syn4tupenipv4:1; /* enable hashing 4-tuple IPv4 SYNs */ + int syn2tupenipv4:1; /* enable hashing 2-tuple IPv4 SYNs */ + int ofdmapen:1; /* Offload Map Enable */ + int tnlmapen:1; /* Tunnel Map Enable */ + int tnlalllookup:1; /* Tunnel All Lookup */ + int hashtoeplitz:1; /* use Toeplitz hash */ + } basicvirtual; + } u; +}; + +/* + * Virtual Interface RSS Configuration in host-native format. + */ +union rss_vi_config { + struct { + u16 defaultq; /* Ingress Queue ID for !tnlalllookup */ + int ip6fourtupen:1; /* hash 4-tuple IPv6 ingress packets */ + int ip6twotupen:1; /* hash 2-tuple IPv6 ingress packets */ + int ip4fourtupen:1; /* hash 4-tuple IPv4 ingress packets */ + int ip4twotupen:1; /* hash 2-tuple IPv4 ingress packets */ + int udpen; /* hash 4-tuple UDP ingress packets */ + } basicvirtual; +}; + +/* + * Maximum resources provisioned for a PCI VF. + */ +struct vf_resources { + unsigned int nvi; /* N virtual interfaces */ + unsigned int neq; /* N egress Qs */ + unsigned int nethctrl; /* N egress ETH or CTRL Qs */ + unsigned int niqflint; /* N ingress Qs/w free list(s) & intr */ + unsigned int niq; /* N ingress Qs */ + unsigned int tc; /* PCI-E traffic class */ + unsigned int pmask; /* port access rights mask */ + unsigned int nexactf; /* N exact MPS filters */ + unsigned int r_caps; /* read capabilities */ + unsigned int wx_caps; /* write/execute capabilities */ +}; + +/* + * Per-"adapter" (Virtual Function) parameters. + */ +struct adapter_params { + struct dev_params dev; /* general device parameters */ + struct sge_params sge; /* Scatter Gather Engine */ + struct vpd_params vpd; /* Vital Product Data */ + struct rss_params rss; /* Receive Side Scaling */ + struct vf_resources vfres; /* Virtual Function Resource limits */ + u8 nports; /* # of Ethernet "ports" */ +}; + +#include "adapter.h" + +#ifndef PCI_VENDOR_ID_CHELSIO +# define PCI_VENDOR_ID_CHELSIO 0x1425 +#endif + +#define for_each_port(adapter, iter) \ + for (iter = 0; iter < (adapter)->params.nports; iter++) + +static inline bool is_10g_port(const struct link_config *lc) +{ + return (lc->supported & SUPPORTED_10000baseT_Full) != 0; +} + +static inline unsigned int core_ticks_per_usec(const struct adapter *adapter) +{ + return adapter->params.vpd.cclk / 1000; +} + +static inline unsigned int us_to_core_ticks(const struct adapter *adapter, + unsigned int us) +{ + return (us * adapter->params.vpd.cclk) / 1000; +} + +static inline unsigned int core_ticks_to_us(const struct adapter *adapter, + unsigned int ticks) +{ + return (ticks * 1000) / adapter->params.vpd.cclk; +} + +int t4vf_wr_mbox_core(struct adapter *, const void *, int, void *, bool); + +static inline int t4vf_wr_mbox(struct adapter *adapter, const void *cmd, + int size, void *rpl) +{ + return t4vf_wr_mbox_core(adapter, cmd, size, rpl, true); +} + +static inline int t4vf_wr_mbox_ns(struct adapter *adapter, const void *cmd, + int size, void *rpl) +{ + return t4vf_wr_mbox_core(adapter, cmd, size, rpl, false); +} + +int __devinit t4vf_wait_dev_ready(struct adapter *); +int __devinit t4vf_port_init(struct adapter *, int); + +int t4vf_query_params(struct adapter *, unsigned int, const u32 *, u32 *); +int t4vf_set_params(struct adapter *, unsigned int, const u32 *, const u32 *); + +int t4vf_get_sge_params(struct adapter *); +int t4vf_get_vpd_params(struct adapter *); +int t4vf_get_dev_params(struct adapter *); +int t4vf_get_rss_glb_config(struct adapter *); +int t4vf_get_vfres(struct adapter *); + +int t4vf_read_rss_vi_config(struct adapter *, unsigned int, + union rss_vi_config *); +int t4vf_write_rss_vi_config(struct adapter *, unsigned int, + union rss_vi_config *); +int t4vf_config_rss_range(struct adapter *, unsigned int, int, int, + const u16 *, int); + +int t4vf_alloc_vi(struct adapter *, int); +int t4vf_free_vi(struct adapter *, int); +int t4vf_enable_vi(struct adapter *, unsigned int, bool, bool); +int t4vf_identify_port(struct adapter *, unsigned int, unsigned int); + +int t4vf_set_rxmode(struct adapter *, unsigned int, int, int, int, int, int, + bool); +int t4vf_alloc_mac_filt(struct adapter *, unsigned int, bool, unsigned int, + const u8 **, u16 *, u64 *, bool); +int t4vf_change_mac(struct adapter *, unsigned int, int, const u8 *, bool); +int t4vf_set_addr_hash(struct adapter *, unsigned int, bool, u64, bool); +int t4vf_get_port_stats(struct adapter *, int, struct t4vf_port_stats *); + +int t4vf_iq_free(struct adapter *, unsigned int, unsigned int, unsigned int, + unsigned int); +int t4vf_eth_eq_free(struct adapter *, unsigned int); + +int t4vf_handle_fw_rpl(struct adapter *, const __be64 *); + +#endif /* __T4VF_COMMON_H__ */ diff --git a/drivers/net/cxgb4vf/t4vf_defs.h b/drivers/net/cxgb4vf/t4vf_defs.h new file mode 100644 index 00000000000..c7b127d9376 --- /dev/null +++ b/drivers/net/cxgb4vf/t4vf_defs.h @@ -0,0 +1,121 @@ +/* + * This file is part of the Chelsio T4 PCI-E SR-IOV Virtual Function Ethernet + * driver for Linux. + * + * Copyright (c) 2009-2010 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#ifndef __T4VF_DEFS_H__ +#define __T4VF_DEFS_H__ + +#include "../cxgb4/t4_regs.h" + +/* + * The VF Register Map. + * + * The Scatter Gather Engine (SGE), Multiport Support module (MPS), PIO Local + * bus module (PL) and CPU Interface Module (CIM) components are mapped via + * the Slice to Module Map Table (see below) in the Physical Function Register + * Map. The Mail Box Data (MBDATA) range is mapped via the PCI-E Mailbox Base + * and Offset registers in the PF Register Map. The MBDATA base address is + * quite constrained as it determines the Mailbox Data addresses for both PFs + * and VFs, and therefore must fit in both the VF and PF Register Maps without + * overlapping other registers. + */ +#define T4VF_SGE_BASE_ADDR 0x0000 +#define T4VF_MPS_BASE_ADDR 0x0100 +#define T4VF_PL_BASE_ADDR 0x0200 +#define T4VF_MBDATA_BASE_ADDR 0x0240 +#define T4VF_CIM_BASE_ADDR 0x0300 + +#define T4VF_REGMAP_START 0x0000 +#define T4VF_REGMAP_SIZE 0x0400 + +/* + * There's no hardware limitation which requires that the addresses of the + * Mailbox Data in the fixed CIM PF map and the programmable VF map must + * match. However, it's a useful convention ... + */ +#if T4VF_MBDATA_BASE_ADDR != CIM_PF_MAILBOX_DATA +#error T4VF_MBDATA_BASE_ADDR must match CIM_PF_MAILBOX_DATA! +#endif + +/* + * Virtual Function "Slice to Module Map Table" definitions. + * + * This table allows us to map subsets of the various module register sets + * into the T4VF Register Map. Each table entry identifies the index of the + * module whose registers are being mapped, the offset within the module's + * register set that the mapping should start at, the limit of the mapping, + * and the offset within the T4VF Register Map to which the module's registers + * are being mapped. All addresses and qualtities are in terms of 32-bit + * words. The "limit" value is also in terms of 32-bit words and is equal to + * the last address mapped in the T4VF Register Map 1 (i.e. it's a "<=" + * relation rather than a "<"). + */ +#define T4VF_MOD_MAP(module, index, first, last) \ + T4VF_MOD_MAP_##module##_INDEX = (index), \ + T4VF_MOD_MAP_##module##_FIRST = (first), \ + T4VF_MOD_MAP_##module##_LAST = (last), \ + T4VF_MOD_MAP_##module##_OFFSET = ((first)/4), \ + T4VF_MOD_MAP_##module##_BASE = \ + (T4VF_##module##_BASE_ADDR/4 + (first)/4), \ + T4VF_MOD_MAP_##module##_LIMIT = \ + (T4VF_##module##_BASE_ADDR/4 + (last)/4), + +#define SGE_VF_KDOORBELL 0x0 +#define SGE_VF_GTS 0x4 +#define MPS_VF_CTL 0x0 +#define MPS_VF_STAT_RX_VF_ERR_FRAMES_H 0xfc +#define PL_VF_WHOAMI 0x0 +#define CIM_VF_EXT_MAILBOX_CTRL 0x0 +#define CIM_VF_EXT_MAILBOX_STATUS 0x4 + +enum { + T4VF_MOD_MAP(SGE, 2, SGE_VF_KDOORBELL, SGE_VF_GTS) + T4VF_MOD_MAP(MPS, 0, MPS_VF_CTL, MPS_VF_STAT_RX_VF_ERR_FRAMES_H) + T4VF_MOD_MAP(PL, 3, PL_VF_WHOAMI, PL_VF_WHOAMI) + T4VF_MOD_MAP(CIM, 1, CIM_VF_EXT_MAILBOX_CTRL, CIM_VF_EXT_MAILBOX_STATUS) +}; + +/* + * There isn't a Slice to Module Map Table entry for the Mailbox Data + * registers, but it's convenient to use similar names as above. There are 8 + * little-endian 64-bit Mailbox Data registers. Note that the "instances" + * value below is in terms of 32-bit words which matches the "word" addressing + * space we use above for the Slice to Module Map Space. + */ +#define NUM_CIM_VF_MAILBOX_DATA_INSTANCES 16 + +#define T4VF_MBDATA_FIRST 0 +#define T4VF_MBDATA_LAST ((NUM_CIM_VF_MAILBOX_DATA_INSTANCES-1)*4) + +#endif /* __T4T4VF_DEFS_H__ */ diff --git a/drivers/net/cxgb4vf/t4vf_hw.c b/drivers/net/cxgb4vf/t4vf_hw.c new file mode 100644 index 00000000000..ea1c123f0cb --- /dev/null +++ b/drivers/net/cxgb4vf/t4vf_hw.c @@ -0,0 +1,1333 @@ +/* + * This file is part of the Chelsio T4 PCI-E SR-IOV Virtual Function Ethernet + * driver for Linux. + * + * Copyright (c) 2009-2010 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include <linux/version.h> +#include <linux/pci.h> + +#include "t4vf_common.h" +#include "t4vf_defs.h" + +#include "../cxgb4/t4_regs.h" +#include "../cxgb4/t4fw_api.h" + +/* + * Wait for the device to become ready (signified by our "who am I" register + * returning a value other than all 1's). Return an error if it doesn't + * become ready ... + */ +int __devinit t4vf_wait_dev_ready(struct adapter *adapter) +{ + const u32 whoami = T4VF_PL_BASE_ADDR + PL_VF_WHOAMI; + const u32 notready1 = 0xffffffff; + const u32 notready2 = 0xeeeeeeee; + u32 val; + + val = t4_read_reg(adapter, whoami); + if (val != notready1 && val != notready2) + return 0; + msleep(500); + val = t4_read_reg(adapter, whoami); + if (val != notready1 && val != notready2) + return 0; + else + return -EIO; +} + +/* + * Get the reply to a mailbox command and store it in @rpl in big-endian order + * (since the firmware data structures are specified in a big-endian layout). + */ +static void get_mbox_rpl(struct adapter *adapter, __be64 *rpl, int size, + u32 mbox_data) +{ + for ( ; size; size -= 8, mbox_data += 8) + *rpl++ = cpu_to_be64(t4_read_reg64(adapter, mbox_data)); +} + +/* + * Dump contents of mailbox with a leading tag. + */ +static void dump_mbox(struct adapter *adapter, const char *tag, u32 mbox_data) +{ + dev_err(adapter->pdev_dev, + "mbox %s: %llx %llx %llx %llx %llx %llx %llx %llx\n", tag, + (unsigned long long)t4_read_reg64(adapter, mbox_data + 0), + (unsigned long long)t4_read_reg64(adapter, mbox_data + 8), + (unsigned long long)t4_read_reg64(adapter, mbox_data + 16), + (unsigned long long)t4_read_reg64(adapter, mbox_data + 24), + (unsigned long long)t4_read_reg64(adapter, mbox_data + 32), + (unsigned long long)t4_read_reg64(adapter, mbox_data + 40), + (unsigned long long)t4_read_reg64(adapter, mbox_data + 48), + (unsigned long long)t4_read_reg64(adapter, mbox_data + 56)); +} + +/** + * t4vf_wr_mbox_core - send a command to FW through the mailbox + * @adapter: the adapter + * @cmd: the command to write + * @size: command length in bytes + * @rpl: where to optionally store the reply + * @sleep_ok: if true we may sleep while awaiting command completion + * + * Sends the given command to FW through the mailbox and waits for the + * FW to execute the command. If @rpl is not %NULL it is used to store + * the FW's reply to the command. The command and its optional reply + * are of the same length. FW can take up to 500 ms to respond. + * @sleep_ok determines whether we may sleep while awaiting the response. + * If sleeping is allowed we use progressive backoff otherwise we spin. + * + * The return value is 0 on success or a negative errno on failure. A + * failure can happen either because we are not able to execute the + * command or FW executes it but signals an error. In the latter case + * the return value is the error code indicated by FW (negated). + */ +int t4vf_wr_mbox_core(struct adapter *adapter, const void *cmd, int size, + void *rpl, bool sleep_ok) +{ + static int delay[] = { + 1, 1, 3, 5, 10, 10, 20, 50, 100 + }; + + u32 v; + int i, ms, delay_idx; + const __be64 *p; + u32 mbox_data = T4VF_MBDATA_BASE_ADDR; + u32 mbox_ctl = T4VF_CIM_BASE_ADDR + CIM_VF_EXT_MAILBOX_CTRL; + + /* + * Commands must be multiples of 16 bytes in length and may not be + * larger than the size of the Mailbox Data register array. + */ + if ((size % 16) != 0 || + size > NUM_CIM_VF_MAILBOX_DATA_INSTANCES * 4) + return -EINVAL; + + /* + * Loop trying to get ownership of the mailbox. Return an error + * if we can't gain ownership. + */ + v = MBOWNER_GET(t4_read_reg(adapter, mbox_ctl)); + for (i = 0; v == MBOX_OWNER_NONE && i < 3; i++) + v = MBOWNER_GET(t4_read_reg(adapter, mbox_ctl)); + if (v != MBOX_OWNER_DRV) + return v == MBOX_OWNER_FW ? -EBUSY : -ETIMEDOUT; + + /* + * Write the command array into the Mailbox Data register array and + * transfer ownership of the mailbox to the firmware. + */ + for (i = 0, p = cmd; i < size; i += 8) + t4_write_reg64(adapter, mbox_data + i, be64_to_cpu(*p++)); + t4_write_reg(adapter, mbox_ctl, + MBMSGVALID | MBOWNER(MBOX_OWNER_FW)); + t4_read_reg(adapter, mbox_ctl); /* flush write */ + + /* + * Spin waiting for firmware to acknowledge processing our command. + */ + delay_idx = 0; + ms = delay[0]; + + for (i = 0; i < 500; i += ms) { + if (sleep_ok) { + ms = delay[delay_idx]; + if (delay_idx < ARRAY_SIZE(delay) - 1) + delay_idx++; + msleep(ms); + } else + mdelay(ms); + + /* + * If we're the owner, see if this is the reply we wanted. + */ + v = t4_read_reg(adapter, mbox_ctl); + if (MBOWNER_GET(v) == MBOX_OWNER_DRV) { + /* + * If the Message Valid bit isn't on, revoke ownership + * of the mailbox and continue waiting for our reply. + */ + if ((v & MBMSGVALID) == 0) { + t4_write_reg(adapter, mbox_ctl, + MBOWNER(MBOX_OWNER_NONE)); + continue; + } + + /* + * We now have our reply. Extract the command return + * value, copy the reply back to our caller's buffer + * (if specified) and revoke ownership of the mailbox. + * We return the (negated) firmware command return + * code (this depends on FW_SUCCESS == 0). + */ + + /* return value in low-order little-endian word */ + v = t4_read_reg(adapter, mbox_data); + if (FW_CMD_RETVAL_GET(v)) + dump_mbox(adapter, "FW Error", mbox_data); + + if (rpl) { + /* request bit in high-order BE word */ + WARN_ON((be32_to_cpu(*(const u32 *)cmd) + & FW_CMD_REQUEST) == 0); + get_mbox_rpl(adapter, rpl, size, mbox_data); + WARN_ON((be32_to_cpu(*(u32 *)rpl) + & FW_CMD_REQUEST) != 0); + } + t4_write_reg(adapter, mbox_ctl, + MBOWNER(MBOX_OWNER_NONE)); + return -FW_CMD_RETVAL_GET(v); + } + } + + /* + * We timed out. Return the error ... + */ + dump_mbox(adapter, "FW Timeout", mbox_data); + return -ETIMEDOUT; +} + +/** + * hash_mac_addr - return the hash value of a MAC address + * @addr: the 48-bit Ethernet MAC address + * + * Hashes a MAC address according to the hash function used by hardware + * inexact (hash) address matching. + */ +static int hash_mac_addr(const u8 *addr) +{ + u32 a = ((u32)addr[0] << 16) | ((u32)addr[1] << 8) | addr[2]; + u32 b = ((u32)addr[3] << 16) | ((u32)addr[4] << 8) | addr[5]; + a ^= b; + a ^= (a >> 12); + a ^= (a >> 6); + return a & 0x3f; +} + +/** + * init_link_config - initialize a link's SW state + * @lc: structure holding the link state + * @caps: link capabilities + * + * Initializes the SW state maintained for each link, including the link's + * capabilities and default speed/flow-control/autonegotiation settings. + */ +static void __devinit init_link_config(struct link_config *lc, + unsigned int caps) +{ + lc->supported = caps; + lc->requested_speed = 0; + lc->speed = 0; + lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX; + if (lc->supported & SUPPORTED_Autoneg) { + lc->advertising = lc->supported; + lc->autoneg = AUTONEG_ENABLE; + lc->requested_fc |= PAUSE_AUTONEG; + } else { + lc->advertising = 0; + lc->autoneg = AUTONEG_DISABLE; + } +} + +/** + * t4vf_port_init - initialize port hardware/software state + * @adapter: the adapter + * @pidx: the adapter port index + */ +int __devinit t4vf_port_init(struct adapter *adapter, int pidx) +{ + struct port_info *pi = adap2pinfo(adapter, pidx); + struct fw_vi_cmd vi_cmd, vi_rpl; + struct fw_port_cmd port_cmd, port_rpl; + int v; + u32 word; + + /* + * Execute a VI Read command to get our Virtual Interface information + * like MAC address, etc. + */ + memset(&vi_cmd, 0, sizeof(vi_cmd)); + vi_cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP(FW_VI_CMD) | + FW_CMD_REQUEST | + FW_CMD_READ); + vi_cmd.alloc_to_len16 = cpu_to_be32(FW_LEN16(vi_cmd)); + vi_cmd.type_viid = cpu_to_be16(FW_VI_CMD_VIID(pi->viid)); + v = t4vf_wr_mbox(adapter, &vi_cmd, sizeof(vi_cmd), &vi_rpl); + if (v) + return v; + + BUG_ON(pi->port_id != FW_VI_CMD_PORTID_GET(vi_rpl.portid_pkd)); + pi->rss_size = FW_VI_CMD_RSSSIZE_GET(be16_to_cpu(vi_rpl.rsssize_pkd)); + t4_os_set_hw_addr(adapter, pidx, vi_rpl.mac); + + /* + * If we don't have read access to our port information, we're done + * now. Otherwise, execute a PORT Read command to get it ... + */ + if (!(adapter->params.vfres.r_caps & FW_CMD_CAP_PORT)) + return 0; + + memset(&port_cmd, 0, sizeof(port_cmd)); + port_cmd.op_to_portid = cpu_to_be32(FW_CMD_OP(FW_PORT_CMD) | + FW_CMD_REQUEST | + FW_CMD_READ | + FW_PORT_CMD_PORTID(pi->port_id)); + port_cmd.action_to_len16 = + cpu_to_be32(FW_PORT_CMD_ACTION(FW_PORT_ACTION_GET_PORT_INFO) | + FW_LEN16(port_cmd)); + v = t4vf_wr_mbox(adapter, &port_cmd, sizeof(port_cmd), &port_rpl); + if (v) + return v; + + v = 0; + word = be16_to_cpu(port_rpl.u.info.pcap); + if (word & FW_PORT_CAP_SPEED_100M) + v |= SUPPORTED_100baseT_Full; + if (word & FW_PORT_CAP_SPEED_1G) + v |= SUPPORTED_1000baseT_Full; + if (word & FW_PORT_CAP_SPEED_10G) + v |= SUPPORTED_10000baseT_Full; + if (word & FW_PORT_CAP_ANEG) + v |= SUPPORTED_Autoneg; + init_link_config(&pi->link_cfg, v); + + return 0; +} + +/** + * t4vf_query_params - query FW or device parameters + * @adapter: the adapter + * @nparams: the number of parameters + * @params: the parameter names + * @vals: the parameter values + * + * Reads the values of firmware or device parameters. Up to 7 parameters + * can be queried at once. + */ +int t4vf_query_params(struct adapter *adapter, unsigned int nparams, + const u32 *params, u32 *vals) +{ + int i, ret; + struct fw_params_cmd cmd, rpl; + struct fw_params_param *p; + size_t len16; + + if (nparams > 7) + return -EINVAL; + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP(FW_PARAMS_CMD) | + FW_CMD_REQUEST | + FW_CMD_READ); + len16 = DIV_ROUND_UP(offsetof(struct fw_params_cmd, + param[nparams].mnem), 16); + cmd.retval_len16 = cpu_to_be32(FW_CMD_LEN16(len16)); + for (i = 0, p = &cmd.param[0]; i < nparams; i++, p++) + p->mnem = htonl(*params++); + + ret = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl); + if (ret == 0) + for (i = 0, p = &rpl.param[0]; i < nparams; i++, p++) + *vals++ = be32_to_cpu(p->val); + return ret; +} + +/** + * t4vf_set_params - sets FW or device parameters + * @adapter: the adapter + * @nparams: the number of parameters + * @params: the parameter names + * @vals: the parameter values + * + * Sets the values of firmware or device parameters. Up to 7 parameters + * can be specified at once. + */ +int t4vf_set_params(struct adapter *adapter, unsigned int nparams, + const u32 *params, const u32 *vals) +{ + int i; + struct fw_params_cmd cmd; + struct fw_params_param *p; + size_t len16; + + if (nparams > 7) + return -EINVAL; + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP(FW_PARAMS_CMD) | + FW_CMD_REQUEST | + FW_CMD_WRITE); + len16 = DIV_ROUND_UP(offsetof(struct fw_params_cmd, + param[nparams]), 16); + cmd.retval_len16 = cpu_to_be32(FW_CMD_LEN16(len16)); + for (i = 0, p = &cmd.param[0]; i < nparams; i++, p++) { + p->mnem = cpu_to_be32(*params++); + p->val = cpu_to_be32(*vals++); + } + + return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL); +} + +/** + * t4vf_get_sge_params - retrieve adapter Scatter gather Engine parameters + * @adapter: the adapter + * + * Retrieves various core SGE parameters in the form of hardware SGE + * register values. The caller is responsible for decoding these as + * needed. The SGE parameters are stored in @adapter->params.sge. + */ +int t4vf_get_sge_params(struct adapter *adapter) +{ + struct sge_params *sge_params = &adapter->params.sge; + u32 params[7], vals[7]; + int v; + + params[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) | + FW_PARAMS_PARAM_XYZ(SGE_CONTROL)); + params[1] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) | + FW_PARAMS_PARAM_XYZ(SGE_HOST_PAGE_SIZE)); + params[2] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) | + FW_PARAMS_PARAM_XYZ(SGE_FL_BUFFER_SIZE0)); + params[3] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) | + FW_PARAMS_PARAM_XYZ(SGE_FL_BUFFER_SIZE1)); + params[4] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) | + FW_PARAMS_PARAM_XYZ(SGE_TIMER_VALUE_0_AND_1)); + params[5] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) | + FW_PARAMS_PARAM_XYZ(SGE_TIMER_VALUE_2_AND_3)); + params[6] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) | + FW_PARAMS_PARAM_XYZ(SGE_TIMER_VALUE_4_AND_5)); + v = t4vf_query_params(adapter, 7, params, vals); + if (v) + return v; + sge_params->sge_control = vals[0]; + sge_params->sge_host_page_size = vals[1]; + sge_params->sge_fl_buffer_size[0] = vals[2]; + sge_params->sge_fl_buffer_size[1] = vals[3]; + sge_params->sge_timer_value_0_and_1 = vals[4]; + sge_params->sge_timer_value_2_and_3 = vals[5]; + sge_params->sge_timer_value_4_and_5 = vals[6]; + + params[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) | + FW_PARAMS_PARAM_XYZ(SGE_INGRESS_RX_THRESHOLD)); + v = t4vf_query_params(adapter, 1, params, vals); + if (v) + return v; + sge_params->sge_ingress_rx_threshold = vals[0]; + + return 0; +} + +/** + * t4vf_get_vpd_params - retrieve device VPD paremeters + * @adapter: the adapter + * + * Retrives various device Vital Product Data parameters. The parameters + * are stored in @adapter->params.vpd. + */ +int t4vf_get_vpd_params(struct adapter *adapter) +{ + struct vpd_params *vpd_params = &adapter->params.vpd; + u32 params[7], vals[7]; + int v; + + params[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_CCLK)); + v = t4vf_query_params(adapter, 1, params, vals); + if (v) + return v; + vpd_params->cclk = vals[0]; + + return 0; +} + +/** + * t4vf_get_dev_params - retrieve device paremeters + * @adapter: the adapter + * + * Retrives various device parameters. The parameters are stored in + * @adapter->params.dev. + */ +int t4vf_get_dev_params(struct adapter *adapter) +{ + struct dev_params *dev_params = &adapter->params.dev; + u32 params[7], vals[7]; + int v; + + params[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_FWREV)); + params[1] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_TPREV)); + v = t4vf_query_params(adapter, 2, params, vals); + if (v) + return v; + dev_params->fwrev = vals[0]; + dev_params->tprev = vals[1]; + + return 0; +} + +/** + * t4vf_get_rss_glb_config - retrieve adapter RSS Global Configuration + * @adapter: the adapter + * + * Retrieves global RSS mode and parameters with which we have to live + * and stores them in the @adapter's RSS parameters. + */ +int t4vf_get_rss_glb_config(struct adapter *adapter) +{ + struct rss_params *rss = &adapter->params.rss; + struct fw_rss_glb_config_cmd cmd, rpl; + int v; + + /* + * Execute an RSS Global Configuration read command to retrieve + * our RSS configuration. + */ + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_write = cpu_to_be32(FW_CMD_OP(FW_RSS_GLB_CONFIG_CMD) | + FW_CMD_REQUEST | + FW_CMD_READ); + cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd)); + v = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl); + if (v) + return v; + + /* + * Transate the big-endian RSS Global Configuration into our + * cpu-endian format based on the RSS mode. We also do first level + * filtering at this point to weed out modes which don't support + * VF Drivers ... + */ + rss->mode = FW_RSS_GLB_CONFIG_CMD_MODE_GET( + be32_to_cpu(rpl.u.manual.mode_pkd)); + switch (rss->mode) { + case FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL: { + u32 word = be32_to_cpu( + rpl.u.basicvirtual.synmapen_to_hashtoeplitz); + + rss->u.basicvirtual.synmapen = + ((word & FW_RSS_GLB_CONFIG_CMD_SYNMAPEN) != 0); + rss->u.basicvirtual.syn4tupenipv6 = + ((word & FW_RSS_GLB_CONFIG_CMD_SYN4TUPENIPV6) != 0); + rss->u.basicvirtual.syn2tupenipv6 = + ((word & FW_RSS_GLB_CONFIG_CMD_SYN2TUPENIPV6) != 0); + rss->u.basicvirtual.syn4tupenipv4 = + ((word & FW_RSS_GLB_CONFIG_CMD_SYN4TUPENIPV4) != 0); + rss->u.basicvirtual.syn2tupenipv4 = + ((word & FW_RSS_GLB_CONFIG_CMD_SYN2TUPENIPV4) != 0); + + rss->u.basicvirtual.ofdmapen = + ((word & FW_RSS_GLB_CONFIG_CMD_OFDMAPEN) != 0); + + rss->u.basicvirtual.tnlmapen = + ((word & FW_RSS_GLB_CONFIG_CMD_TNLMAPEN) != 0); + rss->u.basicvirtual.tnlalllookup = + ((word & FW_RSS_GLB_CONFIG_CMD_TNLALLLKP) != 0); + + rss->u.basicvirtual.hashtoeplitz = + ((word & FW_RSS_GLB_CONFIG_CMD_HASHTOEPLITZ) != 0); + + /* we need at least Tunnel Map Enable to be set */ + if (!rss->u.basicvirtual.tnlmapen) + return -EINVAL; + break; + } + + default: + /* all unknown/unsupported RSS modes result in an error */ + return -EINVAL; + } + + return 0; +} + +/** + * t4vf_get_vfres - retrieve VF resource limits + * @adapter: the adapter + * + * Retrieves configured resource limits and capabilities for a virtual + * function. The results are stored in @adapter->vfres. + */ +int t4vf_get_vfres(struct adapter *adapter) +{ + struct vf_resources *vfres = &adapter->params.vfres; + struct fw_pfvf_cmd cmd, rpl; + int v; + u32 word; + + /* + * Execute PFVF Read command to get VF resource limits; bail out early + * with error on command failure. + */ + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP(FW_PFVF_CMD) | + FW_CMD_REQUEST | + FW_CMD_READ); + cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd)); + v = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl); + if (v) + return v; + + /* + * Extract VF resource limits and return success. + */ + word = be32_to_cpu(rpl.niqflint_niq); + vfres->niqflint = FW_PFVF_CMD_NIQFLINT_GET(word); + vfres->niq = FW_PFVF_CMD_NIQ_GET(word); + + word = be32_to_cpu(rpl.type_to_neq); + vfres->neq = FW_PFVF_CMD_NEQ_GET(word); + vfres->pmask = FW_PFVF_CMD_PMASK_GET(word); + + word = be32_to_cpu(rpl.tc_to_nexactf); + vfres->tc = FW_PFVF_CMD_TC_GET(word); + vfres->nvi = FW_PFVF_CMD_NVI_GET(word); + vfres->nexactf = FW_PFVF_CMD_NEXACTF_GET(word); + + word = be32_to_cpu(rpl.r_caps_to_nethctrl); + vfres->r_caps = FW_PFVF_CMD_R_CAPS_GET(word); + vfres->wx_caps = FW_PFVF_CMD_WX_CAPS_GET(word); + vfres->nethctrl = FW_PFVF_CMD_NETHCTRL_GET(word); + + return 0; +} + +/** + * t4vf_read_rss_vi_config - read a VI's RSS configuration + * @adapter: the adapter + * @viid: Virtual Interface ID + * @config: pointer to host-native VI RSS Configuration buffer + * + * Reads the Virtual Interface's RSS configuration information and + * translates it into CPU-native format. + */ +int t4vf_read_rss_vi_config(struct adapter *adapter, unsigned int viid, + union rss_vi_config *config) +{ + struct fw_rss_vi_config_cmd cmd, rpl; + int v; + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_RSS_VI_CONFIG_CMD) | + FW_CMD_REQUEST | + FW_CMD_READ | + FW_RSS_VI_CONFIG_CMD_VIID(viid)); + cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd)); + v = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl); + if (v) + return v; + + switch (adapter->params.rss.mode) { + case FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL: { + u32 word = be32_to_cpu(rpl.u.basicvirtual.defaultq_to_udpen); + + config->basicvirtual.ip6fourtupen = + ((word & FW_RSS_VI_CONFIG_CMD_IP6FOURTUPEN) != 0); + config->basicvirtual.ip6twotupen = + ((word & FW_RSS_VI_CONFIG_CMD_IP6TWOTUPEN) != 0); + config->basicvirtual.ip4fourtupen = + ((word & FW_RSS_VI_CONFIG_CMD_IP4FOURTUPEN) != 0); + config->basicvirtual.ip4twotupen = + ((word & FW_RSS_VI_CONFIG_CMD_IP4TWOTUPEN) != 0); + config->basicvirtual.udpen = + ((word & FW_RSS_VI_CONFIG_CMD_UDPEN) != 0); + config->basicvirtual.defaultq = + FW_RSS_VI_CONFIG_CMD_DEFAULTQ_GET(word); + break; + } + + default: + return -EINVAL; + } + + return 0; +} + +/** + * t4vf_write_rss_vi_config - write a VI's RSS configuration + * @adapter: the adapter + * @viid: Virtual Interface ID + * @config: pointer to host-native VI RSS Configuration buffer + * + * Write the Virtual Interface's RSS configuration information + * (translating it into firmware-native format before writing). + */ +int t4vf_write_rss_vi_config(struct adapter *adapter, unsigned int viid, + union rss_vi_config *config) +{ + struct fw_rss_vi_config_cmd cmd, rpl; + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_RSS_VI_CONFIG_CMD) | + FW_CMD_REQUEST | + FW_CMD_WRITE | + FW_RSS_VI_CONFIG_CMD_VIID(viid)); + cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd)); + switch (adapter->params.rss.mode) { + case FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL: { + u32 word = 0; + + if (config->basicvirtual.ip6fourtupen) + word |= FW_RSS_VI_CONFIG_CMD_IP6FOURTUPEN; + if (config->basicvirtual.ip6twotupen) + word |= FW_RSS_VI_CONFIG_CMD_IP6TWOTUPEN; + if (config->basicvirtual.ip4fourtupen) + word |= FW_RSS_VI_CONFIG_CMD_IP4FOURTUPEN; + if (config->basicvirtual.ip4twotupen) + word |= FW_RSS_VI_CONFIG_CMD_IP4TWOTUPEN; + if (config->basicvirtual.udpen) + word |= FW_RSS_VI_CONFIG_CMD_UDPEN; + word |= FW_RSS_VI_CONFIG_CMD_DEFAULTQ( + config->basicvirtual.defaultq); + cmd.u.basicvirtual.defaultq_to_udpen = cpu_to_be32(word); + break; + } + + default: + return -EINVAL; + } + + return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl); +} + +/** + * t4vf_config_rss_range - configure a portion of the RSS mapping table + * @adapter: the adapter + * @viid: Virtual Interface of RSS Table Slice + * @start: starting entry in the table to write + * @n: how many table entries to write + * @rspq: values for the "Response Queue" (Ingress Queue) lookup table + * @nrspq: number of values in @rspq + * + * Programs the selected part of the VI's RSS mapping table with the + * provided values. If @nrspq < @n the supplied values are used repeatedly + * until the full table range is populated. + * + * The caller must ensure the values in @rspq are in the range 0..1023. + */ +int t4vf_config_rss_range(struct adapter *adapter, unsigned int viid, + int start, int n, const u16 *rspq, int nrspq) +{ + const u16 *rsp = rspq; + const u16 *rsp_end = rspq+nrspq; + struct fw_rss_ind_tbl_cmd cmd; + + /* + * Initialize firmware command template to write the RSS table. + */ + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_RSS_IND_TBL_CMD) | + FW_CMD_REQUEST | + FW_CMD_WRITE | + FW_RSS_IND_TBL_CMD_VIID(viid)); + cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd)); + + /* + * Each firmware RSS command can accommodate up to 32 RSS Ingress + * Queue Identifiers. These Ingress Queue IDs are packed three to + * a 32-bit word as 10-bit values with the upper remaining 2 bits + * reserved. + */ + while (n > 0) { + __be32 *qp = &cmd.iq0_to_iq2; + int nq = min(n, 32); + int ret; + + /* + * Set up the firmware RSS command header to send the next + * "nq" Ingress Queue IDs to the firmware. + */ + cmd.niqid = cpu_to_be16(nq); + cmd.startidx = cpu_to_be16(start); + + /* + * "nq" more done for the start of the next loop. + */ + start += nq; + n -= nq; + + /* + * While there are still Ingress Queue IDs to stuff into the + * current firmware RSS command, retrieve them from the + * Ingress Queue ID array and insert them into the command. + */ + while (nq > 0) { + /* + * Grab up to the next 3 Ingress Queue IDs (wrapping + * around the Ingress Queue ID array if necessary) and + * insert them into the firmware RSS command at the + * current 3-tuple position within the commad. + */ + u16 qbuf[3]; + u16 *qbp = qbuf; + int nqbuf = min(3, nq); + + nq -= nqbuf; + qbuf[0] = qbuf[1] = qbuf[2] = 0; + while (nqbuf) { + nqbuf--; + *qbp++ = *rsp++; + if (rsp >= rsp_end) + rsp = rspq; + } + *qp++ = cpu_to_be32(FW_RSS_IND_TBL_CMD_IQ0(qbuf[0]) | + FW_RSS_IND_TBL_CMD_IQ1(qbuf[1]) | + FW_RSS_IND_TBL_CMD_IQ2(qbuf[2])); + } + + /* + * Send this portion of the RRS table update to the firmware; + * bail out on any errors. + */ + ret = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL); + if (ret) + return ret; + } + return 0; +} + +/** + * t4vf_alloc_vi - allocate a virtual interface on a port + * @adapter: the adapter + * @port_id: physical port associated with the VI + * + * Allocate a new Virtual Interface and bind it to the indicated + * physical port. Return the new Virtual Interface Identifier on + * success, or a [negative] error number on failure. + */ +int t4vf_alloc_vi(struct adapter *adapter, int port_id) +{ + struct fw_vi_cmd cmd, rpl; + int v; + + /* + * Execute a VI command to allocate Virtual Interface and return its + * VIID. + */ + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP(FW_VI_CMD) | + FW_CMD_REQUEST | + FW_CMD_WRITE | + FW_CMD_EXEC); + cmd.alloc_to_len16 = cpu_to_be32(FW_LEN16(cmd) | + FW_VI_CMD_ALLOC); + cmd.portid_pkd = FW_VI_CMD_PORTID(port_id); + v = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl); + if (v) + return v; + + return FW_VI_CMD_VIID_GET(be16_to_cpu(rpl.type_viid)); +} + +/** + * t4vf_free_vi -- free a virtual interface + * @adapter: the adapter + * @viid: the virtual interface identifier + * + * Free a previously allocated Virtual Interface. Return an error on + * failure. + */ +int t4vf_free_vi(struct adapter *adapter, int viid) +{ + struct fw_vi_cmd cmd; + + /* + * Execute a VI command to free the Virtual Interface. + */ + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP(FW_VI_CMD) | + FW_CMD_REQUEST | + FW_CMD_EXEC); + cmd.alloc_to_len16 = cpu_to_be32(FW_LEN16(cmd) | + FW_VI_CMD_FREE); + cmd.type_viid = cpu_to_be16(FW_VI_CMD_VIID(viid)); + return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL); +} + +/** + * t4vf_enable_vi - enable/disable a virtual interface + * @adapter: the adapter + * @viid: the Virtual Interface ID + * @rx_en: 1=enable Rx, 0=disable Rx + * @tx_en: 1=enable Tx, 0=disable Tx + * + * Enables/disables a virtual interface. + */ +int t4vf_enable_vi(struct adapter *adapter, unsigned int viid, + bool rx_en, bool tx_en) +{ + struct fw_vi_enable_cmd cmd; + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_VI_ENABLE_CMD) | + FW_CMD_REQUEST | + FW_CMD_EXEC | + FW_VI_ENABLE_CMD_VIID(viid)); + cmd.ien_to_len16 = cpu_to_be32(FW_VI_ENABLE_CMD_IEN(rx_en) | + FW_VI_ENABLE_CMD_EEN(tx_en) | + FW_LEN16(cmd)); + return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL); +} + +/** + * t4vf_identify_port - identify a VI's port by blinking its LED + * @adapter: the adapter + * @viid: the Virtual Interface ID + * @nblinks: how many times to blink LED at 2.5 Hz + * + * Identifies a VI's port by blinking its LED. + */ +int t4vf_identify_port(struct adapter *adapter, unsigned int viid, + unsigned int nblinks) +{ + struct fw_vi_enable_cmd cmd; + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_VI_ENABLE_CMD) | + FW_CMD_REQUEST | + FW_CMD_EXEC | + FW_VI_ENABLE_CMD_VIID(viid)); + cmd.ien_to_len16 = cpu_to_be32(FW_VI_ENABLE_CMD_LED | + FW_LEN16(cmd)); + cmd.blinkdur = cpu_to_be16(nblinks); + return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL); +} + +/** + * t4vf_set_rxmode - set Rx properties of a virtual interface + * @adapter: the adapter + * @viid: the VI id + * @mtu: the new MTU or -1 for no change + * @promisc: 1 to enable promiscuous mode, 0 to disable it, -1 no change + * @all_multi: 1 to enable all-multi mode, 0 to disable it, -1 no change + * @bcast: 1 to enable broadcast Rx, 0 to disable it, -1 no change + * @vlanex: 1 to enable hardware VLAN Tag extraction, 0 to disable it, + * -1 no change + * + * Sets Rx properties of a virtual interface. + */ +int t4vf_set_rxmode(struct adapter *adapter, unsigned int viid, + int mtu, int promisc, int all_multi, int bcast, int vlanex, + bool sleep_ok) +{ + struct fw_vi_rxmode_cmd cmd; + + /* convert to FW values */ + if (mtu < 0) + mtu = FW_VI_RXMODE_CMD_MTU_MASK; + if (promisc < 0) + promisc = FW_VI_RXMODE_CMD_PROMISCEN_MASK; + if (all_multi < 0) + all_multi = FW_VI_RXMODE_CMD_ALLMULTIEN_MASK; + if (bcast < 0) + bcast = FW_VI_RXMODE_CMD_BROADCASTEN_MASK; + if (vlanex < 0) + vlanex = FW_VI_RXMODE_CMD_VLANEXEN_MASK; + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_VI_RXMODE_CMD) | + FW_CMD_REQUEST | + FW_CMD_WRITE | + FW_VI_RXMODE_CMD_VIID(viid)); + cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd)); + cmd.mtu_to_vlanexen = + cpu_to_be32(FW_VI_RXMODE_CMD_MTU(mtu) | + FW_VI_RXMODE_CMD_PROMISCEN(promisc) | + FW_VI_RXMODE_CMD_ALLMULTIEN(all_multi) | + FW_VI_RXMODE_CMD_BROADCASTEN(bcast) | + FW_VI_RXMODE_CMD_VLANEXEN(vlanex)); + return t4vf_wr_mbox_core(adapter, &cmd, sizeof(cmd), NULL, sleep_ok); +} + +/** + * t4vf_alloc_mac_filt - allocates exact-match filters for MAC addresses + * @adapter: the adapter + * @viid: the Virtual Interface Identifier + * @free: if true any existing filters for this VI id are first removed + * @naddr: the number of MAC addresses to allocate filters for (up to 7) + * @addr: the MAC address(es) + * @idx: where to store the index of each allocated filter + * @hash: pointer to hash address filter bitmap + * @sleep_ok: call is allowed to sleep + * + * Allocates an exact-match filter for each of the supplied addresses and + * sets it to the corresponding address. If @idx is not %NULL it should + * have at least @naddr entries, each of which will be set to the index of + * the filter allocated for the corresponding MAC address. If a filter + * could not be allocated for an address its index is set to 0xffff. + * If @hash is not %NULL addresses that fail to allocate an exact filter + * are hashed and update the hash filter bitmap pointed at by @hash. + * + * Returns a negative error number or the number of filters allocated. + */ +int t4vf_alloc_mac_filt(struct adapter *adapter, unsigned int viid, bool free, + unsigned int naddr, const u8 **addr, u16 *idx, + u64 *hash, bool sleep_ok) +{ + int i, ret; + struct fw_vi_mac_cmd cmd, rpl; + struct fw_vi_mac_exact *p; + size_t len16; + + if (naddr > ARRAY_SIZE(cmd.u.exact)) + return -EINVAL; + len16 = DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd, + u.exact[naddr]), 16); + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_VI_MAC_CMD) | + FW_CMD_REQUEST | + FW_CMD_WRITE | + (free ? FW_CMD_EXEC : 0) | + FW_VI_MAC_CMD_VIID(viid)); + cmd.freemacs_to_len16 = cpu_to_be32(FW_VI_MAC_CMD_FREEMACS(free) | + FW_CMD_LEN16(len16)); + + for (i = 0, p = cmd.u.exact; i < naddr; i++, p++) { + p->valid_to_idx = + cpu_to_be16(FW_VI_MAC_CMD_VALID | + FW_VI_MAC_CMD_IDX(FW_VI_MAC_ADD_MAC)); + memcpy(p->macaddr, addr[i], sizeof(p->macaddr)); + } + + ret = t4vf_wr_mbox_core(adapter, &cmd, sizeof(cmd), &rpl, sleep_ok); + if (ret) + return ret; + + for (i = 0, p = rpl.u.exact; i < naddr; i++, p++) { + u16 index = FW_VI_MAC_CMD_IDX_GET(be16_to_cpu(p->valid_to_idx)); + + if (idx) + idx[i] = (index >= FW_CLS_TCAM_NUM_ENTRIES + ? 0xffff + : index); + if (index < FW_CLS_TCAM_NUM_ENTRIES) + ret++; + else if (hash) + *hash |= (1 << hash_mac_addr(addr[i])); + } + return ret; +} + +/** + * t4vf_change_mac - modifies the exact-match filter for a MAC address + * @adapter: the adapter + * @viid: the Virtual Interface ID + * @idx: index of existing filter for old value of MAC address, or -1 + * @addr: the new MAC address value + * @persist: if idx < 0, the new MAC allocation should be persistent + * + * Modifies an exact-match filter and sets it to the new MAC address. + * Note that in general it is not possible to modify the value of a given + * filter so the generic way to modify an address filter is to free the + * one being used by the old address value and allocate a new filter for + * the new address value. @idx can be -1 if the address is a new + * addition. + * + * Returns a negative error number or the index of the filter with the new + * MAC value. + */ +int t4vf_change_mac(struct adapter *adapter, unsigned int viid, + int idx, const u8 *addr, bool persist) +{ + int ret; + struct fw_vi_mac_cmd cmd, rpl; + struct fw_vi_mac_exact *p = &cmd.u.exact[0]; + size_t len16 = DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd, + u.exact[1]), 16); + + /* + * If this is a new allocation, determine whether it should be + * persistent (across a "freemacs" operation) or not. + */ + if (idx < 0) + idx = persist ? FW_VI_MAC_ADD_PERSIST_MAC : FW_VI_MAC_ADD_MAC; + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_VI_MAC_CMD) | + FW_CMD_REQUEST | + FW_CMD_WRITE | + FW_VI_MAC_CMD_VIID(viid)); + cmd.freemacs_to_len16 = cpu_to_be32(FW_CMD_LEN16(len16)); + p->valid_to_idx = cpu_to_be16(FW_VI_MAC_CMD_VALID | + FW_VI_MAC_CMD_IDX(idx)); + memcpy(p->macaddr, addr, sizeof(p->macaddr)); + + ret = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &rpl); + if (ret == 0) { + p = &rpl.u.exact[0]; + ret = FW_VI_MAC_CMD_IDX_GET(be16_to_cpu(p->valid_to_idx)); + if (ret >= FW_CLS_TCAM_NUM_ENTRIES) + ret = -ENOMEM; + } + return ret; +} + +/** + * t4vf_set_addr_hash - program the MAC inexact-match hash filter + * @adapter: the adapter + * @viid: the Virtual Interface Identifier + * @ucast: whether the hash filter should also match unicast addresses + * @vec: the value to be written to the hash filter + * @sleep_ok: call is allowed to sleep + * + * Sets the 64-bit inexact-match hash filter for a virtual interface. + */ +int t4vf_set_addr_hash(struct adapter *adapter, unsigned int viid, + bool ucast, u64 vec, bool sleep_ok) +{ + struct fw_vi_mac_cmd cmd; + size_t len16 = DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd, + u.exact[0]), 16); + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_VI_MAC_CMD) | + FW_CMD_REQUEST | + FW_CMD_WRITE | + FW_VI_ENABLE_CMD_VIID(viid)); + cmd.freemacs_to_len16 = cpu_to_be32(FW_VI_MAC_CMD_HASHVECEN | + FW_VI_MAC_CMD_HASHUNIEN(ucast) | + FW_CMD_LEN16(len16)); + cmd.u.hash.hashvec = cpu_to_be64(vec); + return t4vf_wr_mbox_core(adapter, &cmd, sizeof(cmd), NULL, sleep_ok); +} + +/** + * t4vf_get_port_stats - collect "port" statistics + * @adapter: the adapter + * @pidx: the port index + * @s: the stats structure to fill + * + * Collect statistics for the "port"'s Virtual Interface. + */ +int t4vf_get_port_stats(struct adapter *adapter, int pidx, + struct t4vf_port_stats *s) +{ + struct port_info *pi = adap2pinfo(adapter, pidx); + struct fw_vi_stats_vf fwstats; + unsigned int rem = VI_VF_NUM_STATS; + __be64 *fwsp = (__be64 *)&fwstats; + + /* + * Grab the Virtual Interface statistics a chunk at a time via mailbox + * commands. We could use a Work Request and get all of them at once + * but that's an asynchronous interface which is awkward to use. + */ + while (rem) { + unsigned int ix = VI_VF_NUM_STATS - rem; + unsigned int nstats = min(6U, rem); + struct fw_vi_stats_cmd cmd, rpl; + size_t len = (offsetof(struct fw_vi_stats_cmd, u) + + sizeof(struct fw_vi_stats_ctl)); + size_t len16 = DIV_ROUND_UP(len, 16); + int ret; + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_VI_STATS_CMD) | + FW_VI_STATS_CMD_VIID(pi->viid) | + FW_CMD_REQUEST | + FW_CMD_READ); + cmd.retval_len16 = cpu_to_be32(FW_CMD_LEN16(len16)); + cmd.u.ctl.nstats_ix = + cpu_to_be16(FW_VI_STATS_CMD_IX(ix) | + FW_VI_STATS_CMD_NSTATS(nstats)); + ret = t4vf_wr_mbox_ns(adapter, &cmd, len, &rpl); + if (ret) + return ret; + + memcpy(fwsp, &rpl.u.ctl.stat0, sizeof(__be64) * nstats); + + rem -= nstats; + fwsp += nstats; + } + + /* + * Translate firmware statistics into host native statistics. + */ + s->tx_bcast_bytes = be64_to_cpu(fwstats.tx_bcast_bytes); + s->tx_bcast_frames = be64_to_cpu(fwstats.tx_bcast_frames); + s->tx_mcast_bytes = be64_to_cpu(fwstats.tx_mcast_bytes); + s->tx_mcast_frames = be64_to_cpu(fwstats.tx_mcast_frames); + s->tx_ucast_bytes = be64_to_cpu(fwstats.tx_ucast_bytes); + s->tx_ucast_frames = be64_to_cpu(fwstats.tx_ucast_frames); + s->tx_drop_frames = be64_to_cpu(fwstats.tx_drop_frames); + s->tx_offload_bytes = be64_to_cpu(fwstats.tx_offload_bytes); + s->tx_offload_frames = be64_to_cpu(fwstats.tx_offload_frames); + + s->rx_bcast_bytes = be64_to_cpu(fwstats.rx_bcast_bytes); + s->rx_bcast_frames = be64_to_cpu(fwstats.rx_bcast_frames); + s->rx_mcast_bytes = be64_to_cpu(fwstats.rx_mcast_bytes); + s->rx_mcast_frames = be64_to_cpu(fwstats.rx_mcast_frames); + s->rx_ucast_bytes = be64_to_cpu(fwstats.rx_ucast_bytes); + s->rx_ucast_frames = be64_to_cpu(fwstats.rx_ucast_frames); + + s->rx_err_frames = be64_to_cpu(fwstats.rx_err_frames); + + return 0; +} + +/** + * t4vf_iq_free - free an ingress queue and its free lists + * @adapter: the adapter + * @iqtype: the ingress queue type (FW_IQ_TYPE_FL_INT_CAP, etc.) + * @iqid: ingress queue ID + * @fl0id: FL0 queue ID or 0xffff if no attached FL0 + * @fl1id: FL1 queue ID or 0xffff if no attached FL1 + * + * Frees an ingress queue and its associated free lists, if any. + */ +int t4vf_iq_free(struct adapter *adapter, unsigned int iqtype, + unsigned int iqid, unsigned int fl0id, unsigned int fl1id) +{ + struct fw_iq_cmd cmd; + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP(FW_IQ_CMD) | + FW_CMD_REQUEST | + FW_CMD_EXEC); + cmd.alloc_to_len16 = cpu_to_be32(FW_IQ_CMD_FREE | + FW_LEN16(cmd)); + cmd.type_to_iqandstindex = + cpu_to_be32(FW_IQ_CMD_TYPE(iqtype)); + + cmd.iqid = cpu_to_be16(iqid); + cmd.fl0id = cpu_to_be16(fl0id); + cmd.fl1id = cpu_to_be16(fl1id); + return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL); +} + +/** + * t4vf_eth_eq_free - free an Ethernet egress queue + * @adapter: the adapter + * @eqid: egress queue ID + * + * Frees an Ethernet egress queue. + */ +int t4vf_eth_eq_free(struct adapter *adapter, unsigned int eqid) +{ + struct fw_eq_eth_cmd cmd; + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP(FW_EQ_ETH_CMD) | + FW_CMD_REQUEST | + FW_CMD_EXEC); + cmd.alloc_to_len16 = cpu_to_be32(FW_EQ_ETH_CMD_FREE | + FW_LEN16(cmd)); + cmd.eqid_pkd = cpu_to_be32(FW_EQ_ETH_CMD_EQID(eqid)); + return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL); +} + +/** + * t4vf_handle_fw_rpl - process a firmware reply message + * @adapter: the adapter + * @rpl: start of the firmware message + * + * Processes a firmware message, such as link state change messages. + */ +int t4vf_handle_fw_rpl(struct adapter *adapter, const __be64 *rpl) +{ + struct fw_cmd_hdr *cmd_hdr = (struct fw_cmd_hdr *)rpl; + u8 opcode = FW_CMD_OP_GET(be32_to_cpu(cmd_hdr->hi)); + + switch (opcode) { + case FW_PORT_CMD: { + /* + * Link/module state change message. + */ + const struct fw_port_cmd *port_cmd = (void *)rpl; + u32 word; + int action, port_id, link_ok, speed, fc, pidx; + + /* + * Extract various fields from port status change message. + */ + action = FW_PORT_CMD_ACTION_GET( + be32_to_cpu(port_cmd->action_to_len16)); + if (action != FW_PORT_ACTION_GET_PORT_INFO) { + dev_err(adapter->pdev_dev, + "Unknown firmware PORT reply action %x\n", + action); + break; + } + + port_id = FW_PORT_CMD_PORTID_GET( + be32_to_cpu(port_cmd->op_to_portid)); + + word = be32_to_cpu(port_cmd->u.info.lstatus_to_modtype); + link_ok = (word & FW_PORT_CMD_LSTATUS) != 0; + speed = 0; + fc = 0; + if (word & FW_PORT_CMD_RXPAUSE) + fc |= PAUSE_RX; + if (word & FW_PORT_CMD_TXPAUSE) + fc |= PAUSE_TX; + if (word & FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_100M)) + speed = SPEED_100; + else if (word & FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_1G)) + speed = SPEED_1000; + else if (word & FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_10G)) + speed = SPEED_10000; + + /* + * Scan all of our "ports" (Virtual Interfaces) looking for + * those bound to the physical port which has changed. If + * our recorded state doesn't match the current state, + * signal that change to the OS code. + */ + for_each_port(adapter, pidx) { + struct port_info *pi = adap2pinfo(adapter, pidx); + struct link_config *lc; + + if (pi->port_id != port_id) + continue; + + lc = &pi->link_cfg; + if (link_ok != lc->link_ok || speed != lc->speed || + fc != lc->fc) { + /* something changed */ + lc->link_ok = link_ok; + lc->speed = speed; + lc->fc = fc; + t4vf_os_link_changed(adapter, pidx, link_ok); + } + } + break; + } + + default: + dev_err(adapter->pdev_dev, "Unknown firmware reply %X\n", + opcode); + } + return 0; +} |